Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti3C2Tx MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs.

Black phosphorus with a superior theoretical capacity (2596 mAh g-1) and high conductivity is regarded as one of the powerful candidates for lithium-ion battery (LIB) anode materials, whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs. By contrast, the exfoliated two-dimensional phosphorene owns negligible volume variation, and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics, while its positive influence has not been discussed yet. Herein, a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage. The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions, but also endow the nanocomposite with favorable piezoelectricity, thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator. By waltzing with the MXene framework, the optimized electrode exhibits enhanced kinetics and stability, achieving stable cycling performances for 1,000 cycles at 2 A g-1, and delivering a high reversible capacity of 524 mAh g-1 at - 20 â„ƒ, indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

Designing a Microfluidic Chip Driven by Carbon Dioxide for Separation and Detection of Particulate Matter.

Atmospheric particulate pollution poses a great danger to the environment and human health, and there is a strong need to develop equipment for collecting and separating particulate matter of different particle sizes to study the effects of particulate matter on human health. A virtual impactor is a particle separation device based on the principle of inertial separation which provides scientific guidance for identifying the composition characteristics of particles. Much existing virtual impactor research focuses on the design of structural dimensions with little exploration of the effect of fluid properties on performance. In this paper, a microfluidic chip with a cutoff diameter of 1.85 µm was designed based on computational fluid dynamics and numerically simulated via finite element analysis to analyze important parameters such as inlet flow rate, splitting ratio and fluid properties. By numerical simulation of the split ratio, we found that the obtained collection efficiency curves could not be combined into one characteristic curve by the Stk0.5 scaling method. We therefore propose a modified Stokes number equation for predicting the cutoff diameter at different splitting ratios. The collection efficiency curves of different fluids as microfluidic chip media were plotted, and the results show that the cut particle size was reduced from 2.5 µm to 1.85 µm after replacing conventional fluid air with CO2 formed by dry ice sublimation. This is a decrease of approximately 26%, which is superior to other existing methods for reducing the cutoff diameter.

Piezoelectric 1T Phase MoSe2 Nanoflowers and Crystallographically Textured Electrodes for Enhanced Low-Temperature Zinc-Ion Storage.

Transition metal dichalcogenides (TMDs) are regarded as promising cathode materials for zinc-ion storage owing to their large interlayer spacings. However, their capabilities are still limited by sluggish kinetics and inferior conductivities. In this study, a facile one-pot solvothermal method is exploited to vertically plant piezoelectric 1T MoSe2  nanoflowers on carbon cloth (CC) to fabricate crystallographically textured electrodes. The self-built-in electric field owing to the intrinsic piezoelectricity during the intercalation/deintercalation processes can serve as an additional piezo-electrochemical coupling accelerator to enhance the migration of Zn2+ . Moreover, the expanded interlayer distance (9-10 Å), overall high hydrophilicity, and conductivity of the 1T phase MoSe2  also promoted the kinetics. These advantages endow the tailored 1T MoSe2 /CC nanopiezocomposite with feasible Zn2+ diffusion and desirable electrochemical performances at room and low temperatures. Moreover, 1T MoSe2 /CC-based quasi-solid-state zinc-ion batteries are constructed to evaluate the potential of the proposed material in low-temperature flexible energy storage devices. This work expounds the positive effect of intrinsic piezoelectricity of TMDs on Zn2+ migration and further explores the availabilities of TMDs in low-temperature wearable energy-storage devices.

Sustained release of hydrogen sulfide from anisotropic ferrofluid hydrogel for the repair of spinal cord injury.

Spinal cord injury (SCI) results in massive neuronal death, axonal disruption, and cascading inflammatory response, which causes further damage to impaired neurons. The survived neurons with damaged function fail to form effective neuronal circuits. It is mainly caused by the neuroinflammatory microenvironment at injury sites and regenerated axons without guidance. To address this challenge, a ferrofluid hydrogel (FFH) was prepared with Ferric tetrasulfide (Fe3S4), carboxymethyl chitosan, and gold. Its internal structural particles can be oriented in a magnetic field to acquire anisotropy. Moreover, Fe3S4 can release hydrogen sulfide (H2S) with anti-inflammatory effects under acidic conditions. Regarding in vitro experiments, 0.01g/ml Fe3S4 FFH significantly reduced the inflammatory factors produced by LPS-induced BV2 cells. Oriented and longer axons of the induced neural stem cells loaded on anisotropic FFH were observed. In vivo experiments showed that FFH reduced the activated microglia/macrophage and the expression of pro-inflammatory factors in SCI rats through the NF-κB pathway. Moreover, it significantly promoted directional axonal regrowth and functional recovery after SCI. Given the critical role of inhibition of neuroinflammation and directional axonal growth, anisotropic Fe3S4 FFH is a promising alternative for the treatment of SCI.

Computational Fluid Dynamics Study of the Effects of Temperature and Geometry Parameters on a Virtual Impactor.

The virtual impactor, as an atmospheric particle classification chip, provides scientific guidance for identifying the characteristics of particle composition. Most of the studies related to virtual impactors focus on their size structure design, and the effect of temperature in relation to the dynamic viscosity on the cut-off diameter is rarely considered. In this paper, a new method that can reduce the cut-off particle size without increasing the pressure drop is proposed. Based on COMSOL numerical simulations, a new ultra-low temperature virtual impactor with a cut-off diameter of 2.5 µm was designed. A theoretical analysis and numerical simulation of the relationship between temperature and the performance of the virtual impactor were carried out based on the relationship between temperature and dynamic viscosity. The effects of inlet flow rate (Q), major flow channel width (S), minor flow channel width (L) and split ratio (r) on the performance of the virtual impactor were analyzed. The collection efficiency curves were plotted based on the separation effect of the new virtual impactor on different particle sizes. It was found that the new ultra-low temperature approach reduced the PM2.5 cut-off diameter by 19% compared to the conventional virtual impactor, slightly better than the effect of passing in sheath gas. Meanwhile, the low temperature weakens Brownian motion of the particles, thus reducing the wall loss. In the future, this approach can be applied to nanoparticle virtual impactors to solve the problem of their large pressure drop.

Enhancing dynamic ECG heartbeat classification with lightweight transformer model.

Arrhythmia is a common class of Cardiovascular disease which is the cause for over 31% of all death over the world, according to WHOs' report. Automatic detection and classification of arrhythmia, as an effective tool of early warning, has recently been received more and more attention, especially in the applications of wearable devices for data capturing. However, different from traditional application scenarios, wearable electrocardiogram (ECG) devices have some drawbacks, such as being subject to multiple abnormal interferences, thus making accurate ventricular contraction (PVC) and supraventricular premature beat (SPB) detection to be more challenging. The traditional models for heartbeat classification suffer from the problem of large-scale parameters and the performance in dynamic ECG heartbeat classification is not satisfactory. In this paper, we propose a novel light model Lightweight Fussing Transformer to address these problems. We developed a more lightweight structure named LightConv Attention (LCA) to replace the self-attention of Fussing Transformer. LCA has reached remarkable performance level equal to or higher than self-attention with fewer parameters. In particular, we designed a stronger embedding structure (Convolutional Neural Network with attention mechanism) to enhance the weight of features of internal morphology of the heartbeat. Furthermore, we have implemented the proposed methods on real datasets and experimental results have demonstrated outstanding accuracy of detecting PVC and SPB.

Rational Design of Near-Infrared Cyanine-Based Fluorescent Probes for Rapid In Vivo Sensing Cysteine.

Cysteine (Cys) is well-known to be an important biothiol and related to many diseases. However, the in situ trapping of endogenous Cys is still handicapped by a lack of straightforward methods combined with long-wavelength emission and high-performance response. In this work, we described the rational design strategy of cyanine-based near-infrared (NIR) probes for the rapid detection of mitochondrial Cys in living cells and mice. We focus on how to improve the response rate via regulating the electron density of the recognition units in probes. The obtained three probes all displayed remarkable fluorescence enhancement at 780 nm. From screening the obtained probes, it was found that the probe Cy-S-diOMe with electron-donating recognition unit displayed the fastest response rate, the lowest detection limit, and the highest signal-to-noise ratio. More importantly, Cy-S-diOMe was successfully applied to monitor Cys in tumor-bearing mice (within merely 5 min). This paradigm by modulation of the response rate in the cyanine dyes provides a promising methodology for the design of high-performance cyanine-based NIR probes.

In vivo real-time tracking of tumor-specific biocatalysis in cascade nanotheranostics enables synergistic cancer treatment.

Glucose oxidase (GOD)-based synergistic cancer therapy has aroused great research interest in the context of cancer treatment due to the inherent biocompatibility and biodegradability. However, this emerging therapeutic system still lacks a strategy to predict and regulate the in vivo biocatalytic behavior of GOD in real time to minimize the side effects on normal tissues. Herein, we developed a tumor-specific cascade nanotheranostic system (BNG) that combines GOD-catalyzed oxidative stress and dual-channel fluorescent sensing, significantly improving the synergistic therapeutic efficacy with real-time feedback information. The nanotheranostic system remains completely silent in the blood circulatory system and selectively releases GOD enzymes in the tumor site, with enhanced near-infrared (NIR) fluorescence at 825 nm. Subsequently, GOD catalyzes H2O2 production, triggering cascade reactions with NIR fluorescence at 650 nm as an optical output, along with GSH depletion, enabling synergistic cancer treatment. The designed nanotheranostic system, integrated with tumor-activated cascade reactions and triggering a dual-channel output at each step, represents an insightful paradigm for precise cooperative cancer therapy.

Development of anti-fungal pesticides from protein kinase inhibitor-based anticancer agents.

Repurposing the novel p21-activated protein kinase inhibitor compound 15 identified its antifungal activity against five selected species of phytopathogenic fungi. Lead optimization based on its structure gave rise to a focused library of 20 derivatives, among which compound 3c demonstrated increased activity over compound 15 and even comparable to that of some commercialized fungicides in the market including carbendazim, tebuconazole, and pyraclostrobin. This study showed that p21-activated protein kinase inhibitor compound 15 was able to serve as a molecular platform to develop effective fungicides against fungal phytopathogens and indicate that screening existing protein kinase inhibitors might be an effective way to identify lead compounds for antifungal pesticides development.

Carbon source dependence of cell surface composition and demulsifying capability of Alcaligenes sp. S-XJ-1.

Biodemulsifiers are environmentally friendly agents used in recycling oil or purifying water from emulsion, yet the demulsifying feature of cell-surface composition remains unclear. In this study, potentiometric titration, attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry were combined to characterize cell-surface chemical composition of demulsifying strain Alcaligenes sp. S-XJ-1 cultivated with different carbon sources. Cells cultivated with alkane contained abundant elemental nitrogen and basic functional groups, indicating that their surface was rich in proteins or peptides, which contributed to their highest demulsifying efficiency. For cells cultivated with fatty acid ester, the relatively abundant surface lipid contributed to a 50% demulsification ratio owing to the presence of more acidic functional group. The cells cultivated with glucose exhibited a high oxygen concentration (O/C ∼0.28), which indicated the presence of more polysaccharides on the cell surface. This induced the lowest demulsification ratio of 30%. It can be concluded that cell surface-associated proteins or lipids other than the polysaccharide of the demulsifying strain played a positive role in the demulsification activity. In addition, the cell-surface oligoglutamate compounds identified in situ were crucial to the demulsifying capability.