Springtail-inspired omniphobic slippery membrane with nano-concave re-entrant structures for membrane distillation.

Omniphobic membranes, due to their exceptional properties, have drawn significant attention for overcoming the bottleneck in membrane distillation (MD) technology. This study demonstrates an innovative method for fabricating an omniphobic membrane that is simple and facile compared to other methods such as wet/dry etching and photolithography. The surface morphology of springtails was imitated using electrospraying technique to coat a polyvinylidene fluoride substrate with concave-shaped polystyrene beads that were successfully developed by controlling the electrical traction (voltage) and air resistance (humidity). Then, the lipid coating of springtail surfaces was mimicked by dip-coating the membrane in a low-toxicity short-chain perfluoropolyether lubricant. The concave structure's tiny air pockets increased membrane hydrophobicity significantly, indicated by the fact that the first round of water bouncing took only 16.3 ms. Finally, in MD treatment of seawater containing 1.0 mM sodium dodecyl sulfate, the optimized omniphobic membrane maintained a stable 99.9% salt rejection rate.

Optical fibre based artificial compound eyes for direct static imaging and ultrafast motion detection.

Natural selection has driven arthropods to evolve fantastic natural compound eyes (NCEs) with a unique anatomical structure, providing a promising blueprint for artificial compound eyes (ACEs) to achieve static and dynamic perceptions in complex environments. Specifically, each NCE utilises an array of ommatidia, the imaging units, distributed on a curved surface to enable abundant merits. This has inspired the development of many ACEs using various microlens arrays, but the reported ACEs have limited performances in static imaging and motion detection. Particularly, it is challenging to mimic the apposition modality to effectively transmit light rays collected by many microlenses on a curved surface to a flat imaging sensor chip while preserving their spatial relationships without interference. In this study, we integrate 271 lensed polymer optical fibres into a dome-like structure to faithfully mimic the structure of NCE. Our ACE has several parameters comparable to the NCEs: 271 ommatidia versus 272 for bark beetles, and 180o field of view (FOV) versus 150-180o FOV for most arthropods. In addition, our ACE outperforms the typical NCEs by ~100 times in dynamic response: 31.3 kHz versus 205 Hz for Glossina morsitans. Compared with other reported ACEs, our ACE enables real-time, 180o panoramic direct imaging and depth estimation within its nearly infinite depth of field. Moreover, our ACE can respond to an angular motion up to 5.6×106 deg/s with the ability to identify translation and rotation, making it suitable for applications to capture high-speed objects, such as surveillance, unmanned aerial/ground vehicles, and virtual reality.

Leidenfrost Effect-Induced Chaotic Vortex Flow for Efficient Mixing of Highly Viscous Droplets.

Efficiently mixing highly viscous liquids in microfluidic systems is appealing for green chemistry such as chemical synthesis and catalysis, but it is a long-standing challenge owing to the unfavorable diffusion kinetics. In this work, a new strategy is explored for mixing viscous droplets by harnessing a peculiar Leidenfrost state, where the substrate temperature is above the boiling point of the liquid without apparent liquid evaporation. Compared to the control experiment where the droplet stays at a similar temperature but in the contact boiling regime, the mixing time can be reduced significantly. Moreover, it is demonstrated that the liquid mixing originates from the chaotic convection flow in the Leidenfrost droplet, characterized by the internal vortex motion evidenced by the microscale visualization. A correlation between mixing time and droplet volume is also proposed, showing a good agreement with experimental results. It is further shown that Leidenfrost droplets can be used to synthesize nanoparticles of the desired morphology, and it is anticipated that this simple and scalable fabrication approach will find applications in the biological, pharmaceutical, and chemical industries.

Ultrastrong, flexible thermogalvanic armor with a Carnot-relative efficiency over 8.

Body heat, a clean and ubiquitous energy source, is promising as a renewable resource to supply wearable electronics. Emerging tough thermogalvanic device could be a sustainable platform to convert body heat energy into electricity for powering wearable electronics if its Carnot-relative efficiency (ηr) reaches ~5%. However, maximizing both the ηr and mechanical strength of the device are mutually exclusive. Here, we develop a rational strategy to construct a flexible thermogalvanic armor (FTGA) with a ηr over 8% near room temperature, yet preserving mechanical robustness. The key to our design lies in simultaneously realizing the thermosensitive-crystallization and salting-out effect in the elaborately designed ion-transport highway to boost ηr and improve mechanical strength. The FTGA achieves an ultrahigh ηr of 8.53%, coupling with impressive mechanical toughness of 70.65 MJ m-3 and substantial elongation (~900%) together. Our strategy holds sustainable potential for harvesting body heat and powering wearable electronics without recharging.

Designing Fast-Moving Antibacterial Microtorpedoes to Treat Lethal Bacterial Biofilm Infections.

Engineering fast-moving microrobot swarms that can physically disassemble bacterial biofilms and kill the bacteria released from the biofilms is a promising way to combat bacterial biofilm infections. Here, we report electrochemical design of Ag7O8NO3 microtorpedoes with outstanding antibacterial performance and meanwhile capable of moving at speeds of hundreds of body lengths per second in clinically used H2O2 aqueous solutions. These fast-moving antibacterial Ag7O8NO3 microtorpedoes could penetrate into and disintegrate the bacterial biofilms and, in turn, kill the bacteria released from the biofilms. Based on the understanding of the growth behavior of the microtorpedoes, we could fine-tune the morphology of the microtorpedoes to accelerate the moving speed and increase their penetration depth into the biofilms simply via controlling the potential waveforms. We further developed an automatic shaking method to selectively peel off the uniformly structured microtorpedoes from the electrode surface, realizing continuous electrochemical production of the microtorpedoes. Animal experiments proved that the microtorpedo swarms greatly increased the survival rate of the mice infected by lethal biofilms to >90%. We used the electrochemical method to design and massively produce uniformly structured fast-moving antibacterial microtorpedo swarms with application potentials in treatment of lethal bacterial biofilm infections.

Ultrastable piezoelectric biomaterial nanofibers and fabrics as an implantable and conformal electromechanical sensor patch.

Poly(l-lactic acid) (PLLA) is a widely used U.S. Food and Drug Administration-approved implantable biomaterial that also possesses strong piezoelectricity. However, the intrinsically low stability of its high-energy piezoelectric ß phase and random domain orientations associated with current synthesis approaches remain a critical roadblock to practical applications. Here, we report an interfacial anchoring strategy for fabricating core/shell PLLA/glycine (Gly) nanofibers (NFs) by electrospinning, which show a high ratio of piezoelectric ß phase and excellent orientation alignment. The self-assembled core/shell structure offers strong intermolecular interactions between the -OH groups on Gly and C=O groups on PLLA, which promotes the crystallization of oriented PLLA polymer chains and stabilizes the ß phase structure. As-received core/shell NFs exhibit substantially enhanced piezoelectric performance and excellent stability. An all NF-based nonwoven fabric is fabricated and assembled as a flexible nanogenerator. The device offers excellent conformality to heavily wrinkled surfaces and thus can precisely detect complex physiological motions often found from biological organs.

Thermo-adaptive interfacial solar evaporation enhanced by dynamic water gating.

Solar-driven evaporation offers a sustainable solution for water purification, but efficiency losses due to heat dissipation and fouling limit its scalability. Herein, we present a bilayer-structured solar evaporator (SDWE) with dynamic fluidic flow mechanism, designed to ensure a thin water supply and self-cleaning capability. The porous polydopamine (PDA) layer on a nickel skeleton provides photothermal functionality and water microchannels, while the thermo-responsive sporopollenin layer on the bottom acts as a switchable water gate. Using confocal laser microscopy and micro-CT, we demonstrate that this unique structure ensures a steady supply of thin water layers, enhancing evaporation by minimizing latent heat at high temperatures. Additionally, the system initiates a self-cleaning process through bulk water convection when temperature drops due to salt accumulation, thus maintaining increased evaporation efficiency. Therefore, the optimized p-SDWE sample achieved a high evaporation rate of 3.58 kg m-2 h-1 using 93.9% solar energy from 1 sun irradiation, and produces 18-22 liters of purified water per square meter of SDWE per day from brine water. This dynamic water transport mechanism surpasses traditional day-night cycles, offering inherent thermal adaptability for continuous, high-efficiency evaporation.

How liquids charge the superhydrophobic surfaces.

Liquid-solid contact electrification (CE) is essential to diverse applications. Exploiting its full implementation requires an in-depth understanding and fine-grained control of charge carriers (electrons and/or ions) during CE. Here, we decouple the electrons and ions during liquid-solid CE by designing binary superhydrophobic surfaces that eliminate liquid and ion residues on the surfaces and simultaneously enable us to regulate surface properties, namely work function, to control electron transfers. We find the existence of a linear relationship between the work function of superhydrophobic surfaces and the as-generated charges in liquids, implying that liquid-solid CE arises from electron transfer due to the work function difference between two contacting surfaces. We also rule out the possibility of ion transfer during CE occurring on superhydrophobic surfaces by proving the absence of ions on superhydrophobic surfaces after contact with ion-enriched acidic, alkaline, and salt liquids. Our findings stand in contrast to existing liquid-solid CE studies, and the new insights learned offer the potential to explore more applications.

Bioinspired integrated triboelectric electronic tongue.

An electronic tongue (E-tongue) comprises a series of sensors that simulate human perception of taste and embedded artificial intelligence (AI) for data analysis and recognition. Traditional E-tongues based on electrochemical methods suffer from a bulky size and require larger sample volumes and extra power sources, limiting their applications in in vivo medical diagnosis and analytical chemistry. Inspired by the mechanics of the human tongue, triboelectric components have been incorporated into E-tongue platforms to overcome these limitations. In this study, an integrated multichannel triboelectric bioinspired E-tongue (TBIET) device was developed on a single glass slide chip to improve the device's taste classification accuracy by utilizing numerous sensory signals. The detection capability of the TBIET was further validated using various test samples, including representative human body, environmental, and beverage samples. The TBIET achieved a remarkably high classification accuracy. For instance, chemical solutions showed 100% identification accuracy, environmental samples reached 98.3% accuracy, and four typical teas demonstrated 97.0% accuracy. Additionally, the classification accuracy of NaCl solutions with five different concentrations reached 96.9%. The innovative TBIET exhibits a remarkable capacity to detect and analyze droplets with ultrahigh sensitivity to their electrical properties. Moreover, it offers a high degree of reliability in accurately detecting and analyzing various liquid samples within a short timeframe. The development of a self-powered portable triboelectric E-tongue prototype is a notable advancement in the field and is one that can greatly enhance the feasibility of rapid on-site detection of liquid samples in various settings.

Bioinspired Superhydrophobic All-In-One Coating for Adaptive Thermoregulation.

The development of scalable and passive coatings that can adapt to seasonal temperature changes while maintaining superhydrophobic self-cleaning functions is crucial for their practical applications. However, the incorporation of passive cooling and heating functions with conflicting optical properties in a superhydrophobic coating is still challenging. Herein, an all-in-one coating inspired by the hierarchical structure of a lotus leaf that combines surface wettability, optical structure, and temperature self-adaptation is obtained through a simple one-step phase separation process. This coating exhibits an asymmetrical gradient structure with surface-embedded hydrophobic SiO2 particles and subsurface thermochromic microcapsules within vertically distributed hierarchical porous structures. Moreover, the coating imparts superhydrophobicity, high infrared emission, and thermo-switchable sunlight reflectivity, enabling autonomous transitions between radiative cooling and solar warming. The all-in-one coating prevents contamination and over-cooling caused by traditional radiative cooling materials, opening up new prospects for the large-scale manufacturing of intelligent thermoregulatory coatings.

Surface Nanostructures Promote Droplet Splash on Hot Substrates.

Splash, one of the most visually apparent droplet dynamics, can manifest on any surface above a certain impact velocity, regardless of surface wettability. Previous studies demonstrate that elevating the substrate temperature can suppress droplet splash, which is unfavorable for many practical applications, such as spray cooling and combustion. Here, we report that the suppression effect of substrate temperature on splash is nullified by utilizing surfaces with nanostructures. By manipulating air evacuation time through surface nanostructures, we have identified a pathway for precise control over the splash threshold and the ability to tailor the dependence of the splash onset on surface temperature. We further propose a theoretical criterion to determine different splash regimes by considering the competition between air evacuation and the development of flow instabilities. Our findings underscore the crucial role of nanostructures in splash dynamics, offering valuable insights for the control of splash in various industrial scenarios.

Orbital Electrowetting-on-Dielectric for Droplet Manipulation on Superhydrophobic Surfaces.

Electrowetting-on-dielectric (EWOD), recognized as the most successful electrical droplet actuation method, is essential in diverse applications, ranging from thermal management to microfluidics and water harvesting. Despite significant advances, it remains challenging to achieve repeatability, high speed, and simple circuitry in EWOD-based droplet manipulation on superhydrophobic surfaces. Moreover, its efficient operation typically requires electrode arrays and sophisticated circuit control. Here, a newly observed droplet manipulation phenomenon on superhydrophobic surfaces with orbital EWOD (OEW) is reported. Due to the asymmetric electrowetting force generated on the orbit, flexible and versatile droplet manipulation is facilitated with OEW. It is demonstrated that OEW droplet manipulation on superhydrophobic surfaces exhibits higher speed (up to 5 times faster), enhanced functionality (antigravity), and manipulation of diverse liquids (acid, base, salt, organic, e.g., methyl blue, artificial blood) without contamination, and good durability after 1000 tests. It is envisioned that this robust droplet manipulation strategy using OEW will provide a valuable platform for various processes involving droplets, spanning from microfluidic devices to controllable chemical reactions. The previously unreported droplet manipulation phenomenon and control strategy shown here can potentially upgrade EWOD-based microfluidics, antifogging, anti-icing, dust removal, and beyond.

Tuning Thermal Conductivity of Hybrid Perovskites through Halide Alloying.

Tuning the thermal transport properties of hybrid halide perovskites is critical for their applications in optoelectronics, thermoelectrics, and photovoltaics. Here, an effective strategy is demonstrated to modulate the thermal transport property of hybrid perovskites by halide alloying. A highly tunable thermal conductivity of mixed-halide hybrid perovskites is achieved due to halide-alloying and structural distortion. The experimental measurements show that the room temperature thermal conductivity of MAPb(BrxI1- x)3 (x = 0─1) can be largely modulated from 0.27 ± 0.07 W m-1 K-1 (x = 0.5) to 0.47 ± 0.09 W m-1 K-1 (x = 1). Molecular dynamics simulations further demonstrate that the thermal conductivity reduction of hybrid halide perovskites results from the suppression of the mean free paths of the low-frequency acoustic and optical phonons. It is found that halide alloying and the induced structural distortion can largely increase the scatterings of optical and acoustic phonons, respectively. The confined diffusion of MA+ cations in the octahedra cage is found to act as an additional thermal transport channel in hybrid perovskites and can contribute around 10-20% of the total thermal conductivity. The findings provide a strategy for tailoring the thermal transport in hybrid halide perovskites, which may largely benefit their related applications.

Fabrication of Living Entangled Network Composites Enabled by Mycelium.

Organic polymer-based composite materials with favorable mechanical performance and functionalities are keystones to various modern industries; however, the environmental pollution stemming from their processing poses a great challenge. In this study, by finding an autonomous phase separating ability of fungal mycelium, a new material fabrication approach is introduced that leverages such biological metabolism-driven, mycelial growth-induced phase separation to bypass high-energy cost and labor-intensive synthetic methods. The resulting self-regenerative composites, featuring an entangled network structure of mycelium and assembled organic polymers, exhibit remarkable self-healing properties, being capable of reversing complete separation and restoring ≈90% of the original strength. These composites further show exceptional mechanical strength, with a high specific strength of 8.15 MPa g.cm-3, and low water absorption properties (≈33% after 15 days of immersion). This approach spearheads the development of state-of-the-art living composites, which directly utilize bioactive materials to "self-grow" into materials endowed with exceptional mechanical and functional properties.

Low-Pressure Pancake Bouncing on Superhydrophobic Surfaces.

A new form of pancake bouncing is discovered in this work when a droplet impacts onto micro-structured superhydrophobic surfaces in an environment pressure less than 2 kPa, and an unprecedented reduction of contact time by ≈85% is obtained. The mechanisms of forming this unique phenomenon are examined by combining experimental observation, numeical modelling and an improved theoretical model for the overpressure effect arising from the vaporisation inside micro-scaled structures. The competition among the vapor overpressure effect, the droplet impact force, and the surface adhesion determines if the pancake bouncing behavior could occur. After the lift-off the lamella, the pancake bouncing is initiated and its subsequent dynamics is controlled by the internal momentum transfer. Complementary to the prior studies, this work enriches the knowledge of droplet dynamics in low pressure, which allows new strategies of surface morphology engineering for droplet control, an area of high importance for many engineering applications.

A three-dimensional liquid diode for soft, integrated permeable electronics.

Wearable electronics with great breathability enable a comfortable wearing experience and facilitate continuous biosignal monitoring over extended periods1-3. However, current research on permeable electronics is predominantly at the stage of electrode and substrate development, which is far behind practical applications with comprehensive integration with diverse electronic components (for example, circuitry, electronics, encapsulation)4-8. Achieving permeability and multifunctionality in a singular, integrated wearable electronic system remains a formidable challenge. Here we present a general strategy for integrated moisture-permeable wearable electronics based on three-dimensional liquid diode (3D LD) configurations. By constructing spatially heterogeneous wettability, the 3D LD unidirectionally self-pumps the sweat from the skin to the outlet at a maximum flow rate of 11.6 ml cm-2 min-1, 4,000 times greater than the physiological sweat rate during exercise, presenting exceptional skin-friendliness, user comfort and stable signal-reading behaviour even under sweating conditions. A detachable design incorporating a replaceable vapour/sweat-discharging substrate enables the reuse of soft circuitry/electronics, increasing its sustainability and cost-effectiveness. We demonstrated this fundamental technology in both advanced skin-integrated electronics and textile-integrated electronics, highlighting its potential for scalable, user-friendly wearable devices.

Coating-Free Superhydrophobic Hard Surfaces by Electric Discharge Machining with a Magnetic-Assisted Self-Assembly Sheet Electrode.

Artificial superhydrophobic surfaces hold significant potential in various domains, encompassing self-cleaning, droplet manipulation, microfluidics, and thermal management. Consequently, there is a burgeoning demand for cost-effective, mass-producible, and easily fabricated superhydrophobic surfaces for commercial and industrial applications. This research introduces an efficient, uncomplicated method for constructing hierarchical structures on hard substrates such as binderless tungsten carbide (WC) and glass substrates. The WC substrates were processed by using electrical discharge machining (EDM) with a magnetic-assisted self-assembly sheet electrode. The resultant surfaces comprised micropillars/microgrooves and diminutive craters formed by discharge and ablation, respectively. These surfaces exhibited superior hydrophobic properties, which can be attributed to the modified surface energy and surface texture construction. Our study indicates that a superhydrophobic surface can be achieved on a textured binderless WC. The maximum contact angle and minimum roll-off angle of the hierarchical structure induced by EDM with a magnetic-assisted self-assembly sheet electrode are about 158 and 5°, respectively. The advancing and receding angles are about 161° ± 2 and 157° ± 3, respectively, when the base is tilted at 3°. Furthermore, we have successfully replicated this superhydrophobic structured surface on glass substrates utilizing glass molding technology. This innovative approach to creating superhydrophobic surfaces on hard materials paves the way for the mass production of functional structures on other materials, such as metallic glass, titanium alloy, and mold steel. Most crucially, the proposed fabrication technique offers a straightforward, cost-effective route for creating functional surfaces, rendering it attractive for large-scale industrial production due to its considerable application prospects.

Superhydrophobic Designs for Durable Radiative Cooling.

Passive radiative cooling technology is an eco-friendly and energy-free alternative to conventional cooling systems. However, a major challenge in implementing radiative cooling in an outdoor environment is the presence of contamination, which significantly degrades the cooling effectiveness. In response to this challenge, researchers have explored superhydrophobic radiative coolers with self-cleaning abilities as a potential solution. In this Perspective, we summarize the latest progress and highlight certain design principles and strategies for integrating superhydrophobicity into radiative cooling structures. These strategies can be classified into three distinct categories: spraying particles, constructing pores, and creating patterns. Finally, we identify future challenges and opportunities in superhydrophobic radiative coolers, intending to push the technology toward practical applications.

Solid-state, liquid-free ion-conducting elastomers: rising-star platforms for flexible intelligent devices.

Soft ionic conductors have emerged as a powerful toolkit to engineer transparent flexible intelligent devices that go beyond their conventional counterparts. Particularly, due to their superior capacities of eliminating the evaporation, freezing and leakage issues of the liquid phase encountered with hydrogels, organohydrogels and ionogels, the emerging solid-state, liquid-free ion-conducting elastomers have been largely recognized as ideal candidates for intelligent flexible devices. However, despite their extensive development, a comprehensive and timely review in this emerging field is lacking, particularly from the perspective of design principles, advanced manufacturing, and distinctive applications. Herein, we present (1) the design principles and intriguing merits of solid-state, liquid-free ion-conducting elastomers; (2) the methods to manufacture solid-state, liquid-free ion-conducting elastomers with preferential architectures and functions using advanced technologies such as 3D printing; (3) how to leverage solid-state, liquid-free ion-conducting elastomers in exploiting advanced applications, especially in the fields of flexible wearable sensors, bioelectronics and energy harvesting; (4) what are the unsolved scientific and technical challenges and future opportunities in this multidisciplinary field. We envision that this review will provide a paradigm shift to trigger insightful thinking and innovation in the development of intelligent flexible devices and beyond.