Seawater barium and sulfide removal improved marine habitability for the Cambrian Explosion of early animals.

An increase in atmospheric pO2 has been proposed as a trigger for the Cambrian Explosion at ∼539-514 Ma but the mechanistic linkage remains unclear. To gain insights into marine habitability for the Cambrian Explosion, we analysed excess Ba contents (Baexcess) and isotope compositions (δ138Baexcess) of ∼521-Myr-old metalliferous black shales in South China. The δ138Baexcess values vary within a large range and show a negative logarithmic correlation with Baexcess, suggesting a major (>99%) drawdown of oceanic Ba inventory via barite precipitation. Spatial variations in Baexcess and δ138Baexcess indicate that Ba removal was driven by sulfate availability that was ultimately derived from the upwelling of deep seawaters. Global oceanic oxygenation across the Ediacaran-Cambrian transition may have increased the sulfate reservoir via oxidation of sulfide and concurrently decreased the Ba reservoir by barite precipitation. The removal of both H2S and Ba that are deleterious to animals could have improved marine habitability for early animals.

Accurate Determination of Barium Isotopic Compositions in Sequentially Leached Phases from Carbonates by Double Spike-Thermal Ionization Mass Spectrometry (DS-TIMS).

Recent studies have proposed barium isotopes as a novel proxy for studying primary productivity in paleo-oceangraphical studies and elements cycling through the critical zone. Pristine marine carbonates are generally assumed to preserve Ba isotope compositions of ancient seawater. However, Ba incorporated in or adsorbed on detrital minerals such as clays in impure carbonates may limit the accurate application of the Ba isotope proxy for paleo-ocean environmental reconstruction purposes. We present here a sequential extraction procedure and show that a considerable range of Ba concentrations can be associated with the four operationally defined sequential leaching fractions (water-soluble, exchangeable, carbonate, and oxidizable fractions). Chemical separation of Ba from these leachates is achieved with a recovery of >98.6% by our modified ion exchange procedure. Potential instrumental mass bias effects and barium isotope fractionation during the chemical separation are corrected using a carefully optimized 130Ba-135Ba double-spike method. A long-term reproducibility better than ±0.03‰ (2SD) for δ137/134Ba has been achieved by using the double spike-thermal ionization mass spectrometry (DS-TIMS) in this study. We demonstrate that significant variations of δ137/134Ba in the analyzed leachates suggest a considerable Ba isotope fractionation between carbonate mineral phase and noncarbonate phases of marine carbonate rocks. The barium isotope distribution in a set of standard reference materials and natural geological samples under various geological settings has been presented. When utilizing Ba isotopes as a proxy for primary productivity and the biogeochemical cycling of Ba, our new findings from sequential Ba extraction as well as our modified precise DS-TIMS analytical setup should be taken into account.

The origin of rare alkali metals in geothermal fluids of southern Tibet, China: A silicon isotope perspective.

Geothermal waters from the Semi, Dagejia and Kawu hot springs in the Shiquanhe-Yarlung Zangbo geothermal field of southern Tibet (China) are highly enriched in rare alkali metals (RAM). However, the enrichment mechanism is still hotly debated. Here, we report the first silicon isotope data of these geothermal waters to unravel the origin of the extreme RAM enrichments. Sinter precipitation in the spring vents and water-rock interaction in the deep reservoir controlled both the silicon budget and silicon isotope fractionation. The rates of water-rock interaction and sinter precipitation in three spring sites decrease in the sequences Semi > Kawu > Dagejia, and Dagejia > Kawu > Semi respectively. Silicon isotope fractionation during sinter precipitation (i.e. Δ30Siprecipitate-solution < -0.1‰) is less than that due to water-rock interaction (i.e. Δ30Sisolution-rocks at least as high as -0.47‰), which makes it possible to use the δ30Si signatures of springs to evaluate the intensity of water-rock interaction. Based on the available evidence, a conceptual model of RAM enrichment is proposed: (i) persistent magmatic activity in southern Tibet provided the initial enrichment of the RAM in host rocks and a heat sources for the deep reservoirs of geothermal systems; (ii) the high Cl- content and long residence time (thousands of years) promote the leaching of RAM from the silicate host rocks.

Silicon Isotope Geochemistry: Fractionation Linked to Silicon Complexations and Its Geological Applications.

The fundamental advances in silicon isotope geochemistry have been systematically demonstrated in this work. Firstly, the continuous modifications in analytical approaches and the silicon isotope variations in major reservoirs and geological processes have been briefly introduced. Secondly, the silicon isotope fractionation linked to silicon complexation/coordination and thermodynamic conditions have been extensively stressed, including silicate minerals with variable structures and chemical compositions, silica precipitation and diagenesis, chemical weathering of crustal surface silicate rocks, biological uptake, global oceanic Si cycle, etc. Finally, the relevant geological implications for meteorites and planetary core formation, ore deposits formation, hydrothermal fluids activities, and silicon cycling in hydrosphere have been summarized. Compared to the thermodynamic isotope fractionation of silicon associated with high-temperature processes, that in low-temperature geological processes is much more significant (e.g., chemical weathering, biogenic/non-biogenic precipitation, biological uptake, adsorption, etc.). The equilibrium silicon isotope fractionation during the mantle-core differentiation resulted in the observed heavy isotope composition of the bulk silicate Earth (BSE). The equilibrium fractionation of silicon isotopes among silicate minerals are sensitive to the Si-O bond length, Si coordination numbers (CN), the polymerization degrees of silicate unites, and the electronegativity of cations in minerals. The preferential enrichment of different speciation of dissoluble Si (DSi) (e.g., silicic acid H4SiO4° (H4) and H3SiO4- (H3)) in silica precipitation and diagenesis, and chemical weathering, lead to predominately positive Si isotope signatures in continental surface waters, in which the dynamic fractionation of silicon isotope could be well described by the Rayleigh fractionation model. The role of complexation in biological fractionations of silicon isotopes is more complicated, likely involving several enzymatic processes and active transport proteins. The integrated understanding greatly strengthens the potential of δ30Si proxy for reconstructing the paleo terrestrial and oceanic environments, and exploring the meteorites and planetary core formation, as well as constraining ore deposits and hydrothermal fluid activity.

Matrix Effects Originating from Coexisting Minerals and Accurate Determination of Stable Silver Isotopes in Silver Deposits.

Except for extensive studies in core formation and volatile-element depletion processes using radiogenic Ag isotopes (i.e., the Pd-Ag chronometer), recent research has revealed that the mass fractionation of silver isotopes is in principle controlled by physicochemical processes (e.g., evaporation, diffusion, chemical exchange, etc.) during magmatic emplacement and hydrothermal alteration. As these geologic processes only produce very minor variations of δ109Ag from -0.5 to +1.1‰, more accurate and precise measurements are required. In this work, a robust linear relationship between instrumental mass discrimination of Ag and Pd isotopes was obtained at the Ag/Pd molar ratio of 1:20. In Au-Ag ore deposits, silver minerals have complex paragenetic relationships with other minerals (e.g., chalcopyrite, sphalerite, galena, pyrite, etc.). It is difficult to remove such abundant impurities completely because the other metals are tens to thousands of times richer than silver. Both quantitative evaluation of matrix effects and modification of chemical chromatography were carried out to deal with the problems. Isobaric inferences (e.g., 65Cu40Ar+ to 105Pd, 208Pb2+ to 104Pd, and 67Zn40Ar+ to 107Ag+) and space charge effects dramatically shift the measured δ109Ag values. The selection of alternative Pd isotope pairs is effective in eliminating spectral matrix effects so as to ensure accurate analysis under the largest possible ranges for metal impurities, which are Cu/Ag ≤ 50:1, Fe/Ag ≤ 600:1, Pb/Ag ≤ 10:1, and Zn/Ag ≤ 1:1, respectively. With the modified procedure, we reported silver isotope compositions (δ109Ag) in geological standard materials and typical Au-Ag ore deposit samples varying from -0.029 to +0.689 ‰ with external reproducibility of ±0.009-0.084 ‰. A systemic survey of δ109Ag (or ε109Ag) variations in rocks, ore deposits, and environmental materials in nature is discussed.

Adsorption Behavior of Metasilicate on N-Methyl d-Glucamine Functional Groups and Associated Silicon Isotope Fractionation.

Significant isotope fractionation of silicon provides a powerful geochemical tracer for biological and physicochemical processes in terrestrial and marine environments. The exact mechanism involved in silicon uptake as part of the biological process is not well known. The silicon uptake in biological processes is investigated using silicate adsorption onto the N-methylglucamine functional group (sugarlike structure, abbreviated as L) of Amberlite IRA-743 resin as an analogue of the formation of silicate-sugar complexes in plants. This study provides new evidence that certain sugars can react readily with basic silicic acid to form sugar-silicate chelating complexes, and the equilibrium adsorption behavior of silicate can be well described by the Langmuir isotherm with a Gibbs free energy (ΔG) of -11.94 ± 0.21 kJ·mol(-1) at 293 K. The adsorption kinetics corresponds well to a first-order kinetic model in which the adsorption rate constant ka of 1.25 × 10(-4) s(-1) and the desorption rate constant kd of 4.00 × 10(-6) s(-1) are obtained at 293 K. Both ka and kd increase with increasing temperature. The bonding configurations of silicate-sugar complexes imply the principal coordination complex of hexacoordinated silicon (silicon/L = 1:3) in the liquid phase and the dominant tetracoordinated silicon in the solid phase. Similar to those of many natural processes, the biological uptake via the sugar-silicate chelating complexes favors the preferential enrichment of light Si isotopes into solids, and the Rayleigh model controls the dynamic isotope fractionation with an estimated silicon isotope fractionation factor (i.e., αsolid-solution = [Formula: see text]) of 0.9971. This study advanced the fundamental understanding of the dynamic isotope fractionation of silicon during silicon cycling from the lithosphere to the biosphere and hydrosphere in surficial processes.

Improvements on high-precision measurement of bromine isotope ratios by multicollector inductively coupled plasma mass spectrometry.

A new, feasible procedure for high-precision bromine isotope analysis using multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) is described. With a combination of HR mass resolution mode and accurate optimization of the Zoom Optics parameters (Focus Quad: -1.30; Zoom Quad: 0.00), the challenging problem of the isobaric interferences ((40)Ar(38)ArH(+) and (40)Ar(40)ArH(+)) in the measurement of bromine isotopes ((79)Br(+), (81)Br(+)) has been effectively solved. The external reproducibility of the measured (81)Br/(79)Br ratios in the selected standard reference materials ranged from ±0.03‰ to ±0.14‰, which is superior to or equivalent to the best results from previous contributions. The effect of counter cations on the Br(+) signal intensity and the instrumental-induced mass bias was evaluated as the loss of HBr aerosol in nebulizer and potential diffusive isotope fractionations.

An improved procedure for separation/purification of boron from complex matrices and high-precision measurement of boron isotopes by positive thermal ionization and multicollector inductively coupled plasma mass spectrometry.

In order to eliminate boron loss and potential isotopic fractionation during chemical pretreatment of natural samples with complex matrices, a three-column ion-exchange separation/purification procedure has been modified, which ensures more than 98% recovery of boron from each step for a wide range of sample matrices, and is applicable for boron isotope analysis by both TIMS and MC-ICP-MS. The PTIMS-Cs2BO2(+)-static double collection method was developed, ensuring simultaneous collection of (133)Cs2(11)B(16)O2(+)(m/z 309) and (133)Cs2(10)B(16)O2(+) (m/z 308) ions in adjacent H3-H4 Faraday cups with typical zoom optics parameters (Focus Quad: 15 V, Dispersion Quad: -85 V). The external reproducibilities of the measured (11)B/(10)B ratios of the NIST 951 boron standard solutions of 1000 ng, 100 ng and 10 ng of boron by PTIMS method are ±0.06‰, ±0.16‰ and ±0.25‰, respectively, which indicates excellent precision can be achieved for boron isotope measurement at nanogram level boron in natural samples. An on-peak zero blank correction procedure was employed to correct the residual boron signals effect in MC-ICP-MS, which gives consistent δ(11)B values with a mean of 39.66±0.35‰ for seawater in the whole range of boron content from 5 ppb to 200 ppb, ensuring accurate boron isotope analysis in few ppb boron. With the improved protocol, consistent results between TIMS and MC-ICP-MS data were obtained in typical geological materials within a wide span of δ(11)B values ranging from -25‰ to +40‰.

Precise determination of the absolute isotopic abundance ratio and the atomic weight of chlorine in three international reference materials by the positive thermal ionization mass spectrometer-Cs2Cl+-graphite method.

Because the variation in chlorine isotopic abundances of naturally occurring chlorine bearing substances is significant, the IUPAC Inorganic Chemistry Division, Commission on Isotopic Abundances and Atomic Weights (CIAAW-IUPAC) decided that the uncertainty of atomic weight of chlorine (A(r)(Cl)) should be increased so that the implied range was related to terrestrial variability in 1999 (Coplen, T. B. Atomic weights of the elements 1999 (IUPAC Technical Report), Pure Appl. Chem.2001, 73(4), 667-683; and then, it emphasized that the standard atomic weights of ten elements including chlorine were not constants of nature but depend upon the physical, chemical, and nuclear history of the materials in 2009 (Wieser, M. E.; Coplen, T. B. Pure Appl. Chem.2011, 83(2), 359-396). According to the agreement by CIAAW that an atomic weight could be defined for one specified sample of terrestrial origin (Wieser, M. E.; Coplen, T. B. Pure Appl. Chem.2011, 83(2), 359-396), the absolute isotope ratios and atomic weight of chlorine in standard reference materials (NIST 975, NIST 975a, ISL 354) were accurately determined using the high-precision positive thermal ionization mass spectrometer (PTIMS)-Cs(2)Cl(+)-graphite method. After eliminating the weighing error caused from evaporation by designing a special weighing container and accurately determining the chlorine contents in two highly enriched Na(37)Cl and Na(35)Cl salts by the current constant coulometric titration, one series of gravimetric synthetic mixtures prepared from two highly enriched Na(37)Cl and Na(35)Cl salts was used to calibrate two thermal ionization mass spectrometers in two individual laboratories. The correction factors (i.e., K(37/35) = R(37/35meas)/R(37/35calc)) were obtained from five cycles of iterative calculations on the basis of calculated and determined R((37)Cl/(35)Cl) values in gravimetric synthetic mixtures. The absolute R((37)Cl/(35)Cl) ratios for NIST SRM 975, NIST 975a, and ISL 354 by the precise calibrated isotopic composition measurements are 0.319876 ± 0.000067, 0.319768 ± 0.000187, and 0.319549 ± 0.000044, respectively. As a result, the atomic weights of chlorine in NIST 975, NIST 975a, and ISL 354 are derived as 35.45284(8), 35.45272(21), and 35.45252(2) individually, which are consistent with the issued values of 35.453(2) by IUPAC in 1999.

Emission mechanism of polyatomic ions Cs2Cl+ and Cs2BO2(+) in thermal ionization mass spectrometry with various carbon materials.

The emission behavior of polyatomic ions Cs(2)Cl(+) and Cs(2)BO(2)(+) in the presence of various carbon materials (Graphite, Carbon, SWNTs, and Fullerenes) in the ionization source of thermal ionization mass spectrometry (TIMS) has been investigated. The emission capacity of various carbon materials are remarkably different as evidenced by the obvious discrepancy in signal intensity of polyatomic ions and accuracy/precision of boron and chlorine isotopic composition determined using Cs(2)Cl(+)-graphite-PTIMS/Cs(2)BO(2)(+)-graphite-PTIMS methods. Combined with morphology and microstructure properties of four selected carbon materials, it could be concluded that the emission behavior of the polyatomic ions strongly depends on the microstructure of the carbon materials used. A surface-induced collision mechanism for formation of such kinds of polyatomic ions in the ionization source of TIMS has been proposed based on the optimized configuration of Cs(2)BO(2)(+) and Cs(2)Cl(+) ions in the gas phase using a molecular dynamics method. The combination of the geometry of the selected carbon materials with the configuration of two polyatomic ions explains the structure effect of carbon materials on the emission behavior of polyatomic ions, where graphite samples with perfect parallels and equidistant layers ensure the capacity of emission to the maximum extent, and fullerenes worsen the emission of polyatomic ions by blocking their pathway.