RESUMO
Self-sweeping fiber lasers have carved out numerous applications such as spectral detection, fiber sensor, etc. In this work, we propose a single-frequency self-sweeping fiber laser with a few-longitudinal-mode range by employing a length of space path to achieve the function of intracavity ranging. Different from the previous design, a fiber collimator and mirror are utilized to act as the reflector, and the distance between them can be adjusted flexibly. Based on this design, we achieve a few-longitudinal-mode self-sweeping operation containing seven longitudinal modes. When the distance is set as a fixed value, the behaviors of fiber laser containing central wavelength, quasi-continuous wave pulse, as well as radio frequency spectrum at different pump power are measured. The intracavity ranging systems are also demonstrated at different distances between collimator and mirror, showing a promising accuracy. This work provides a new laser ranging tool and opens up the applied scenario of self-sweeping fiber laser.
RESUMO
Photonic moiré-like lattices, a readily accessible platform for realizing the spatial localization of light, attract intensive attention due to their unique flatband characteristics. In this paper, a periodic moiré-like lattice with embedded defects is proposed theoretically, and the linear propagation of the probe beam in such a system is investigated intensively. The results show that the positions of defects in periodic moiré-like lattices depend on the sublattice rotation angle. Further studies show that the localization of light could be improved by adjusting the apodization function of defects. In addition, the experimental observation of the moiré-like lattice with apodized defects also confirms the theoretical analysis. Our study enriches the physical connotation of photonic moiré lattices and guides the design of novel photonic crystal fibers.
RESUMO
The local temperature and longitudinal strain at spatial resolution of 0.5% of the pulse-width equivalent length along a nonuniform As2Se3-PMMA tapered fiber is investigated by a Brillouin gain-profile tracing method. This scheme uses a 20 ns pump pulse with the pulse-width equivalent length longer than the fiber under test (FUT) of 50 cm nonuniform As2Se3-PMMA tapered fiber. The whole interaction process of long pump pulse is investigated including pump pulse entering the FUT, overlapping completely with FUT and leaving the FUT. The evolution of Brillouin gain spectrum (BGS) along the nonuniform fiber is formed by the subtraction of frequency-domain BGS of two adjacent sensing points in the trailing edge (where the pump pulse leaves the FUT) of the BOTDA spectrum. The trailing part is preferred due to the pre-amplified acoustic field by the long pumping pulse. Then the local responses of temperature and wide-range longitudinal strain with high spatial resolution of 1.1 cm along the nonuniform As2Se3-PMMA tapered fibers are investigated. The change of the local temperature and strain shifts the BGS that is different along the nonuniform fibers, which forms the distributed measurement. The spatial resolution, the fiber length of the detected section in the proposed method, is 1.1 cm for the local temperature and longitudinal strain measurement, which is 0.5% of the pulse-width equivalent length and is limited by the sampling rate of data acquisition and the fall-time of the pump pulse.
RESUMO
We study the pulse characteristics in a laser mode-locked by active modulators with non-Hermitian driven signals. The signal assembles a parity-time (P T) symmetric and an anti-parity-time (A P T) symmetric function with fundamental and harmonic frequencies, respectively, inducing the complex coupling between modes in the frequency domain. A one-dimensional synthetic lattice is used to analyze the spectral mode coupling. By enlarging the weight and harmonic order of the A P T part of the signal, the optical spectrum can be adjusted from redshift to blueshift. Simultaneously, the pulse duration and spectral width are shortened and broadened, respectively. The work explores the role of non-Hermitian modulation in the mode-locked laser area.
RESUMO
Optical fiber sensors based on an interferometer structure play a significant role in monitoring physical, chemical, and biological parameters in natural environments. However, sensors with high-sensitivity measurement still present their own challenges. This paper deduces and summarizes the methods of sensitivity enhancement in interferometer based fiber optical sensors, including the derivation of the sensing principles, key characteristics, and recently-reported applications.The modal coupling interferometer is taken as an example to derive the five terms related to the sensitivity: (1) the wavelength-dependent difference of phase between two modes/arms ∂Ïd/∂λ, (2) the sensor length Lw,A, (3) refractive index difference between two modes/arms Δneff,A, (4) sensing parameter dependent length change α, and (5) sensing parameter dependent refractive index change γ. The research papers in the literature that modulate these terms to enhance the sensing sensitivity are reviewed in the paper.
Assuntos
Tecnologia de Fibra Óptica , Interferometria , Interferometria/métodos , Fibras Ópticas , Refratometria/métodosRESUMO
We designed and generated gradient photonic moiré lattice fields comprising three varying periodic moiré wavefields. Because of the common twisted angles between periodic triangular and hexagonal moiré wavefields, gradient patterns can be easily obtained through coherent superposition of hexagonal-triangular-hexagonal photonic moiré lattice fields. In addition, two specific twisted angles of Δα|C=3 and Δα|C=5 are proposed, which not only guarantee the periodicity of moiré fields but also provide an additional degree of freedom to control the structural arrangement of the gradient photonic moiré lattice fields. Further study reveals the non-diffracting character of the gradient photonic moiré lattice field generated using the holographic method. This study proposes an easy way to generate and control the structures of gradient moiré lattice fields that can be used to fabricate photonic lattices in optical storage media for light modulation.
RESUMO
We demonstrate for the first time, to our knowledge, an all-fiber erbium-doped mode-locked laser in which mode-locking (ML) is realized by the combination of nonlinear polarization rotation and a saturable dynamic filtering effect, thereby generating nearly transform-limited ultrashort pulses with a pulse duration and spectral width of 45.2 ps and 0.0775 nm, respectively. The laser achieves both ML and harmonic ML by increasing the pump power. Simultaneously, the filtering function is maintained by the saturable dynamic induced grating (SDIG) throughout the power-modulation process. Furthermore, numerical simulations are used to analyze the pulse energy evolution in the cavity, revealing the advantages of hybrid ML in decreasing the pulse duration and time-bandwidth product under narrow filtering status. This work proposes a practical method to achieve ultrafast laser pulses with a narrow bandwidth, solving the problem that the SDIG has a hard time realizing a stable ML sequence.
RESUMO
We reported an all-polarization-maintaining single-frequency ytterbium-doped bidirectional fiber laser for the first time, to the best of our knowledge. Single-frequency operation was achieved by a stable dynamic grating in the active fiber of a proper length owing to the bidirectional operation of the laser. The fiber laser possesses a linewidth of 7.43 kHz, a slope efficiency of 47.9%, and a great long-term stability.
RESUMO
We systematically study the stable-, period-N- and multiple-soliton regimes in an Erbium-doped fiber laser effectively mode-locked by nonlinear polarization rotation technique. In the stable mode-locked regime, an invariant soliton with 497 fs pulse duration and 6.9 nm optical spectrum are obtained. With a larger pump power of 180 mW, the period-N state (in which the pulse intensity returns to its original value after N cavity-roundtrips) emerges, accompanied by sub-sideband generation on the first Kelly sideband and spectrum shift. Considering the inconsistent central wavelengths between gain and polarization-dependent isolator (PD-ISO) firstly, to our knowledge, the numerical results are in good agreement with the experiment and reveal the composite filtering of gain and PD-ISO takes major responsibility for spectrum shift, which causes group velocity offset simultaneously. Further study shows the continued increase of pump power can lead to the laser operating in the unstable multi-pulse state and the narrow spectral width contributes to stabilizing the multi-pulse state. Our work can promote the understanding of soliton dynamics and filtering in ultrafast fiber lasers.
RESUMO
We study, to the best of our knowledge, the first observations of light propagation in synthetic photonic lattice with anti-parity-time symmetry by tuning the gain or loss of two coupled fiber rings alternatively and corresponding phase distribution periodically. By tuning the phase φ and the wave number Q in the lattice, asymmetric transmission of the light field can be achieved for both long and short loops when φ≠nπ/2 (n is an integer). Further investigations demonstrate that asymmetric localization of the light field in the long loop and symmetric diffraction-free transmission in two loops can both be realized by changing these two parameters. Our work provides a new method to obtain anti-parity-time symmetry in synthetic photonic lattice and paves a broad way to achieve novel optical manipulation in photonic devices.
RESUMO
In this article, we report, to the best of our knowledge, the first observation of the reverse self-sweeping phenomenon in an all-polarization-maintaining bidirectional ytterbium-doped fiber laser. Conventional behaviors, including the dependence of sweeping range, sweeping rate and average pulse repetition rate on the pump power, can be observed in our fiber laser. Two couplers with ratio of 50/50 and 10/90 are respectively employed as the output coupler in fiber laser, which generates the reverse self-sweeping phenomenon for comparison.
RESUMO
We study both theoretically and numerically the asymmetric localization of lightwave in a three-layered photonic lattice with non-Hermitian perturbations. The results indicate that the gauge potential for photons can arise from the non-Hermitian perturbations, once the perturbations satisfy parity-time symmetry. Further study shows that the Peierls phase between adjacent waveguides has an important impact on the shapes of the band structures, which result in asymmetric localization of a lightwave in such a system when the wave number and Peierls phase satisfy k=Ï=±π/2. This Letter provides a new way to control the light transmission and a feasible method to realize gauge potential for photons.
RESUMO
We demonstrate a passively Q-switched ytterbium-doped fiber laser based on black phosphorus (BP) flakes covered microfiber. The BP saturable absorber is fabricated by sandwiching a microfiber between two pieces of polydimethylsiloxane supported BP flakes film, which is prepared by the mechanical exfoliation method. In this case the BP flakes can be well protected from the action of air and moisture. By incorporating BP flakes covered microfiber into a ytterbium-doped ring fiber laser, stable and reliable Q-switched operation at 1064 nm can be realized via interaction between few-layers BP flakes and the evanescent field of the laser. The laser allows Q-switched pulse generation with a repetition rate in the range of 26-76 kHz and a pulse duration in the range of 5.5-2.0 µs, by varying the pump power from 38 mW to 100 mW.