Differential vital staining of normal fibroblasts and melanoma cells by an anionic conjugated polyelectrolyte.

Molecular probes for imaging of live cells are of great interest for studying biological and pathological processes. The anionic luminescent conjugated polythiophene (LCP) polythiophene acetic acid (PTAA), has previously been used for vital staining of cultured fibroblasts as well as transformed cells with results indicating differential staining due to cell phenotype. Herein, we investigated the behavior of PTAA in two normal and five transformed cells lines. PTAA fluorescence in normal cells appeared in a peripheral punctated pattern whereas the probe was more concentrated in a one-sided perinuclear localization in the five transformed cell lines. In fibroblasts, PTAA fluorescence was initially associated with fibronectin and after 24 h partially localized to lysosomes. The uptake and intracellular target in malignant melanoma cells was more ambiguous and the intracellular target of PTAA in melanoma cells is still elusive. PTAA was well tolerated by both fibroblasts and melanoma cells, and microscopic analysis as well as viability assays showed no signs of negative influence on growth. Stained cells maintained their proliferation rate for at least 12 generations. Although the probe itself was nontoxic, photoinduced cellular toxicity was observed in both cell lines upon irradiation directly after staining. However, no cytotoxicity was detected when the cells were irradiated 24 h after staining, indicating that the photoinduced toxicity is dependent on the cellular location of the probe. Overall, these studies certified PTAA as a useful agent for vital staining of cells, and that PTAA can potentially be used to study cancer-related biological and pathological processes.

Dark states in ionic oligothiophene bioprobes--evidence from fluorescence correlation spectroscopy and dynamic light scattering.

Luminescent conjugated polyelectrolytes (LCPs) can upon interaction with biological macromolecules change their luminescent properties, and thereby serve as conformation- and interaction-sensitive biomolecular probes. However, to exploit this in a more quantitative manner, there is a need to better understand the photophysical processes involved. We report studies of the conjugated pentameric oligothiophene derivative p-FTAA, which changes optical properties with different p-FTAA concentrations in aqueous buffers, and in a pH and oxygen saturation dependent manner. Using dynamic light scattering, luminescence spectroscopy and fluorescence correlation spectroscopy, we find evidence for a monomer-dimer equilibrium, for the formation of large clusters of p-FTAA in aqueous environment, and can couple aggregation to changed emission properties of oligothiophenes. In addition, we observe the presence of at least two dark transient states, one presumably being a triplet state. Oxygen was found to statically quench the p-FTAA fluorescence but also to promote molecular fluorescence by quenching dark transient states of the p-FTAA molecules. Taken together, this study provides knowledge of fluorescence and photophysical features essential for applying p-FTAA and other oligothiophene derivatives for diagnostic purposes, including detection and staining of amyloid aggregates.

Probing physical properties of a DNA-protein complex using nanofluidic channels.

A method to investigate physical properties of a DNA-protein complex in solution is demonstrated. By using tapered nanochannels and lipid passivation the persistence length of a RecA filament formed on double-stranded DNA is determined to 1.15 µm, in agreement with the literature, without attaching protein or DNA to any handles or surfaces.

Base pair sensitivity and enhanced ON/OFF ratios of DNA-binding: donor-acceptor-donor fluorophores.

The photophysical properties of two recently reported live cell compatible, DNA-binding dyes, 4,6-bis(4-(4-methylpiperazin-1-yl)phenyl)pyrimidin-2-ol, 1, and [1,3-bis[4-(4-methylpiperazin-1-yl)phenyl]-1,3-propandioato-κO, κO']difluoroboron, 2, are characterized. Both dyes are quenched in aqueous solutions, while binding to sequences containing only AT pairs enhances the emission. Binding of the dyes to sequences containing only GC pairs does not produce a significant emission enhancement, and for sequences containing both AT and GC base pairs, emission is dependent on the length of the AT pair tracts. Through emission lifetime measurements and analysis of the dye redox potentials, photoinduced electron transfer with GC pairs is implicated as a quenching mechanism. Binding of the dyes to AT-rich regions is accompanied by bathochromic shifts of 26 and 30 nm, respectively. Excitation at longer wavelengths thus increases the ON/OFF ratio of the bound probes significantly and provides improved contrast ratios in solution as well as in fluorescence microscopy of living cells.

Turn-on, fluorescent nuclear stains with live cell compatibility.

DNA-binding, green and yellow fluorescent probes with excellent brightness and high on/off ratios are reported. The probes are membrane permeable, live-cell compatible, and optimally matched to 405 nm and 514 nm laser lines, making them attractive alternatives to UV-excited and blue emissive Hoechst 33342 and DAPI nuclear stains. Their electronic structure was investigated by optical spectroscopy supported by TD-DFT calculations. DNA binding is accompanied by 27- to 75-fold emission enhancements, and linear dichroism demonstrates that one dye is a groove binder while the other intercalates into DNA.

A single-step competitive binding assay for mapping of single DNA molecules.

Optical mapping of genomic DNA is of relevance for a plethora of applications such as scaffolding for sequencing and detection of structural variations as well as identification of pathogens like bacteria and viruses. For future clinical applications it is desirable to have a fast and robust mapping method based on as few steps as possible. We here demonstrate a single-step method to obtain a DNA barcode that is directly visualized using nanofluidic devices and fluorescence microscopy. Using a mixture of YOYO-1, a bright DNA dye, and netropsin, a natural antibiotic with very high AT specificity, we obtain a DNA map with a fluorescence intensity profile along the DNA that reflects the underlying sequence. The netropsin binds to AT-tetrads and blocks these binding sites from YOYO-1 binding which results in lower fluorescence intensity from AT-rich regions of the DNA. We thus obtain a DNA barcode that is dark in AT-rich regions and bright in GC-rich regions with kilobasepair resolution. We demonstrate the versatility of the method by obtaining a barcode on DNA from the phage T4 that captures its circular permutation and agrees well with its known sequence.

Interactions between a luminescent conjugated oligoelectrolyte and insulin during early phases of amyloid formation.

Aggregates of misfolded proteins play an important role in diseases such as Alzheimer's. Here it is demonstrated how the anionic oligothiophene p-FTAA interacts with and influences pre-fibrillar protein assemblies during the earlier stages of in vitro fibrillation. Conjugated polythiophenes have previously been demonstrated to detect and discriminate between different types of protein aggregates and also introduce luminescent or conductive properties to these nanoscale fiber structures. Fluorescence spectroscopy, DLS, TEM and FCS are employed to follow the interplay between p-FTAA and insulin during in vitro fibrillation.

Interactions between a luminescent conjugated polyelectrolyte and amyloid fibrils investigated with flow linear dichroism spectroscopy.

Luminescent conjugated polyelectrolytes (LCPs) have emerged as novel stains to detect and distinguish between various amyloidogenic species, including prefibrillar aggregates and mature fibril deposits, both in vitro and in histological tissue samples, offering advantages over traditional amyloid stains. We here use linear dichroism (LD) spectroscopy under shear alignment to characterize interactions between the LCP poly(3-thiophene acetic acid) (PTAA) and amyloid fibrils. The positive signature in the LD spectrum of amyloid-bound PTAA suggests that it binds in the grooves between adjacent protein side-chains in the amyloid fibril core, parallel to the fibril axis, similar to thioflavin-T and congo red. Moreover, using LD we record the absorption spectrum of amyloid-bound PTAA in isolation from free dye showing a red-shift by ca 30 nm compared to in solution. This has important implications for the use of PTAA as an amyloid probe in situ and in vitro and we demonstrate how to obtain optimal amyloid-specific fluorescence read-outs using PTAA. We use the shift in maximum absorption to estimate the fraction of bound PTAA at a given concentration. PTAA binding reaches saturation when added in 36 times excess and at this concentration the PTAA density is 4-5 monomer units per insulin monomer in the fibril. Finally, we demonstrate that changes in LD intensity can be related to alterations in persistence length of amyloid fibrils resulting from changes in solution conditions, showing that this technique is useful to assess macroscopic properties of these biopolymers.

Polypeptide-guided assembly of conducting polymer nanocomposites.

A strategy for fabrication of electroactive nanocomposites with nanoscale organization, based on self-assembly, is reported. Gold nanoparticles are assembled by a polypeptide folding-dependent bridging. The polypeptides are further utilized to recruit and associate with a water soluble conducting polymer. The polymer is homogenously incorporated into the nanocomposite, forming conducting pathways which make the composite material highly conducting.

Supramolecular assembly of designed α-helical polypeptide-based nanostructures and luminescent conjugated polyelectrolytes.

Designed polypeptides with controllable folding properties are utilized as supramolecular templates for fabrication of ordered nanoscale molecular and fibrous assemblies of LCPs. The properties of the LCPs as well as the three dimensional conformation of the polypeptide-scaffold determine how the polymers are arranged in the supramolecular construct, which highly affects the properties of the hybrid material. The ability to control the polypeptide conformation and assembly into fibers provides a promising route for tuning the optical properties of LCPs and for fabrication of complex functional supramolecules with well defined structural properties.

DNA chips with conjugated polyelectrolytes in resonance energy transfer mode.

We show how to use well-defined conjugated polyelectrolytes (CPEs) combined with surface energy patterning to fabricate DNA chips utilizing fluorescence signal amplification. Cholesterol-modified DNA strands in complex with a CPE are adsorbed to a surface energy pattern, formed by printing with soft elastomer stamps. Hybridization of the surface bound DNA strands with a short complementary strand from solution is monitored using both fluorescence microscopy and imaging surface plasmon resonance. The CPEs act as antennas, enhancing resonance energy transfer to the dye-labeled DNA when complementary hybridization of the double strand occurs.

The promotion of neuronal maturation on soft substrates.

Microenvironmental mechanical properties of stem cell niches vary across tissues and developmental stages. Accumulating evidence suggests that matching substrate elasticity with in vivo tissue elasticity facilitates stem cell differentiation. However, it has not been established whether substrate elasticity can control the maturation stage of cells generated by stem cell differentiation. Here we show that soft substrates with elasticities commensurable to the elasticity of the brain promote the maturation of neural stem cell-derived neurons. In the absence of added growth factors, neurons differentiated on soft substrates displayed long neurites and presynaptic terminals, contrasting with the bipolar immature morphology of neurons differentiated on stiff substrates. Further, soft substrates supported an increase in astrocytic differentiation. However, stiffness cues could not override the dependency of astrocytic differentiation on Notch signaling. These results demonstrate that substrate elasticity per se can drive neuronal maturation thus defining a crucial parameter in neuronal differentiation of stem cells.

Oligothiophene assemblies defined by DNA interaction: from single chains to disordered clusters.

The organization of conjugated polyelectrolytes (CPEs) interacting with biomolecules sets conditions for the biodetection of biological processes and identity, through the use of optical emission from the CPE. Herein, a well-defined CPE and its binding to DNA is studied. By using dynamic light scattering and circular dichroism spectroscopy, it is shown that the CPE forms a multimolecule ensemble in aqueous solution that is more than doubled in size when interacting with a small DNA chain, while single chains are evident in ethanol. The related changes in the fluorescence spectra upon polymer aggregation are assigned to oscillator strength redistribution between vibronic transitions in weakly coupled H-aggregates. An enhanced single-molecule spectroscopy technique that allows full control of excitation and emission light polarization is applied to combed and decorated lambdaDNA chains. It is found that the organization of combed CPE-lambdaDNA complexes (when dry on the surface) allows considerable variation of CPE distances and direction relative to the DNA chain. By analysis of the polarization data energy transfer between the polymer chains in individual complexes is confirmed and their sizes estimated.

Protein biochips patterned by microcontact printing or by adsorption-soft lithography in two modes.

Patterning of proteins is critical to protein biochips. Printing of layers of proteins is well established, as is adsorption of proteins to surfaces properly modified with surface chemical functionalities. The authors show that simple methods based on soft lithography stamps can be used to prepare functional antibody chips through both these routes. Both methods incorporate transfer of the stamp material poly(dimethylsiloxane) (PDMS) to the biochip, whether intended or not intended. The results indicate that microcontact printing of proteins always includes PDMS transfer, thereby creating a possibility of unspecific adsorption to a hydrophobic domain.