Inhibition of glycogen synthase kinase-3-beta (GSK3ß) blocks nucleocapsid phosphorylation and SARS-CoV-2 replication.

GSK3ß has been proposed to have an essential role in Coronaviridae infections. Screening of a targeted library of GSK3ß inhibitors against both SARS-CoV-2 and HCoV-229E to identify broad-spectrum anti-Coronaviridae inhibitors resulted in the identification of a high proportion of active compounds with low toxicity to host cells. A selected lead compound, T-1686568, showed low micromolar, dose-dependent activity against SARS-CoV-2 and HCoV-229E. T-1686568 showed efficacy in viral-infected cultured cells and primary 2D organoids. T-1686568 also inhibited SARS-CoV-2 variants of concern Delta and Omicron. Importantly, while inhibition by T-1686568 resulted in the overall reduction of viral load and protein translation, GSK3ß inhibition resulted in cellular accumulation of the nucleocapsid protein relative to the spike protein. Following identification of potential phosphorylation sites of Coronaviridae nucleocapsid, protein kinase substrate profiling assays combined with Western blotting analysis of nine host kinases showed that the SARS-CoV-2 nucleocapsid could be phosphorylated by GSK3ß and PKCa. GSK3ß phosphorylated SARS-CoV-2 nucleocapsid on the S180/S184, S190/S194 and T198 phospho-sites, following previous priming in the adjacent S188, T198 and S206, respectively. Such inhibition presents a compelling target for broad-spectrum anti-Coronaviridae compound development, and underlies the mechanism of action of GSK3ß host-directed therapy against this class of obligate intracellular pathogens.

Escherichia coli recombinant expression of SARS-CoV-2 protein fragments.

We have developed a method for the inexpensive, high-level expression of antigenic protein fragments of SARS-CoV-2 proteins in Escherichia coli. Our approach uses the thermophilic family 9 carbohydrate-binding module (CBM9) as an N-terminal carrier protein and affinity tag. The CBM9 module was joined to SARS-CoV-2 protein fragments via a flexible proline-threonine linker, which proved to be resistant to E. coli proteases. Two CBM9-spike protein fragment fusion proteins and one CBM9-nucleocapsid fragment fusion protein largely resisted protease degradation, while most of the CBM9 fusion proteins were degraded at some site in the SARS-CoV-2 protein fragment. All of the fusion proteins were highly expressed in E. coli and the CBM9-ID-H1 fusion protein was shown to yield 122 mg/L of purified product. Three purified CBM9-SARS-CoV-2 fusion proteins were tested and found to bind antibodies directed to the appropriate SARS-CoV-2 antigenic regions. The largest intact CBM9 fusion protein, CBM9-ID-H1, incorporates spike protein amino acids 540-588, which is a conserved region overlapping and C-terminal to the receptor binding domain that is widely recognized by human convalescent sera and contains a putative protective epitope.

Differential dephosphorylation of CTP:phosphocholine cytidylyltransferase upon translocation to nuclear membranes and lipid droplets.

CTP:phosphocholine cytidylyltransferase-alpha (CCTα) and CCTß catalyze the rate-limiting step in phosphatidylcholine (PC) biosynthesis. CCTα is activated by association of its α-helical M-domain with nuclear membranes, which is negatively regulated by phosphorylation of the adjacent P-domain. To understand how phosphorylation regulates CCT activity, we developed phosphosite-specific antibodies for pS319 and pY359+pS362 at the N- and C-termini of the P-domain, respectively. Oleate treatment of cultured cells triggered CCTα translocation to the nuclear envelope (NE) and nuclear lipid droplets (nLDs) and rapid dephosphorylation of pS319. Removal of oleate led to dissociation of CCTα from the NE and increased phosphorylation of S319. Choline depletion of cells also caused CCTα translocation to the NE and S319 dephosphorylation. In contrast, Y359 and S362 were constitutively phosphorylated during oleate addition and removal, and CCTα-pY359+pS362 translocated to the NE and nLDs of oleate-treated cells. Mutagenesis revealed that phosphorylation of S319 is regulated independently of Y359+S362, and that CCTα-S315D+S319D was defective in localization to the NE. We conclude that the P-domain undergoes negative charge polarization due to dephosphorylation of S319 and possibly other proline-directed sites and retention of Y359 and S362 phosphorylation, and that dephosphorylation of S319 and S315 is involved in CCTα recruitment to nuclear membranes.

Automated Solid-Phase Peptide Synthesis.

The development of solid-phase peptide synthesis by Bruce Merrifield paved the way for a synthesis carried out by machines. Automated peptide synthesis is a fast and convenient way of synthesizing many peptides simultaneously. This chapter tries to give a general guidance for the development of synthesis protocols for the peptide synthesizer. It also provides some suggestions for the modification of the synthesized peptides. Additionally, many examples of possible challenges during and after the synthesis are given in order to support the reader in finding the best synthesis strategy. Numerous references are given to many of the described matters.

SPOT Synthesis: The Solid-Phase Peptide Synthesis on Planar Surfaces.

Peptide libraries are a highly useful tool for drug development. While most preparations of peptide libraries are laborious during either the synthesis or its screening, the SPOT synthesis offers the possibility of directly synthesizing large numbers of peptides on a planar surface. As a positionally addressable, multiple solid-phase synthesis technique, the synthesis allows a very convenient handling during the screening of that peptide library in a form of an array. This publication will provide protocols for the basic procedures of the SPOT synthesis and references to some important literature regarding that technique and its application.

Determination of the Substrate Specificity of Protein Kinases with Peptide Micro- and Macroarrays.

Elucidation of the key determinants for the phosphorylation site specificities of protein kinases facilitates identification of their physiological substrates, and serves to better define their critical roles in the signaling networks that underlie a multitude of cellular activities. Albeit with some apparent limitations, such as the lack of contextual information for secondary substrate-binding sites, the synthetic peptide-based approach has been adopted widely for the kinase specificity profiling studies, especially when they are used in an array format, which permits the screening of large numbers of potential peptide substrates in parallel. In this chapter, we present detailed protocols for determining protein kinase substrate specificity using an approach that involves both peptide microarrays and macroarrays. In particular, SPOT synthesis on macroarrays can be used to follow up on in silico predictions of protein kinase substrate specificity with predictive algorithms.

Investigation of the automated solid-phase synthesis of a 38mer peptide with difficult sequence pattern under different synthesis strategies.

Difficult peptides are a constant challenge in solid-phase peptide synthesis. In particular, hydroxyl amino acids such as serine can cause severe breakdowns in coupling yields even several amino acids after the insertion of the critical amino acid. This paper investigates several methods of improving synthesis yields of difficult peptides including the use of different resins, activators and the incorporation of a structure-breaking pseudoproline dipeptide building block both alone and in combination with each other.

SPOT synthesis as a tool to study protein-protein interactions.

Peptide arrays are a widely used tool in proteomic research for investigations of drug development and molecular interactions including protein-protein or protein-peptide interactions. Most peptide synthesis techniques are able to simultaneously synthesize only up to a few hundred single peptides. Using the SPOT™ technique, it is possible to synthesize and screen in parallel up to 8,000 peptides or peptide mixtures. In addition, such peptides can be released from the membrane and transferred onto peptide microarrays. Here we present protocols for the peptides synthesis on cellulose including the preparation of different cellulose membranes and easy-to-use detection methods on these peptide macroarrays. In addition, a protocol to produce and screen peptide microarray using the SPOT technology is provided.

Synthetic peptide arrays for pathway-level protein monitoring by liquid chromatography-tandem mass spectrometry.

Effective methods to detect and quantify functionally linked regulatory proteins in complex biological samples are essential for investigating mammalian signaling pathways. Traditional immunoassays depend on proprietary reagents that are difficult to generate and multiplex, whereas global proteomic profiling can be tedious and can miss low abundance proteins. Here, we report a target-driven liquid chromatography-tandem mass spectrometry (LC-MS/MS) strategy for selectively examining the levels of multiple low abundance components of signaling pathways which are refractory to standard shotgun screening procedures and hence appear limited in current MS/MS repositories. Our stepwise approach consists of: (i) synthesizing microscale peptide arrays, including heavy isotope-labeled internal standards, for use as high quality references to (ii) build empirically validated high density LC-MS/MS detection assays with a retention time scheduling system that can be used to (iii) identify and quantify endogenous low abundance protein targets in complex biological mixtures with high accuracy by correlation to a spectral database using new software tools. The method offers a flexible, rapid, and cost-effective means for routine proteomic exploration of biological systems including "label-free" quantification, while minimizing spurious interferences. As proof-of-concept, we have examined the abundance of transcription factors and protein kinases mediating pluripotency and self-renewal in embryonic stem cell populations.

Synthesis of antimicrobial peptides using the SPOT technique.

Developing new lead structures for drugs against multiresistant bacteria is an urgent need for modern medicine. Antimicrobial peptides are a class of drugs that can be used to discover such structures. In order to support development of this research, a fast, easy, and inexpensive method to synthesize peptides is necessary. The SPOT synthesis has the potential to produce the required peptide arrays, synthesizing up to 8,000 peptides, peptide mixtures, or other organic compounds on cellulose or other planar surfaces in a positionally addressable and multiple manner. Protocols for the preparation of cellulose membranes and the SPOT synthesis as well as cleavage of peptides from the support are described.

Synthesis of peptide arrays using SPOT-technology and the CelluSpots-method.

Peptide synthesis on cellulose using the SPOT technology follows the standard Fmoc-chemistry and can be performed manually or automated. This method allows the synthesis of low-cost peptide arrays containing around 900 large spots of addressable peptides on a cellulose sheet of 19 cm x 29 cm. These peptides can be cleaved from the cellulose support by ammonia gas and afterward spotted on glass microchips. Alternatively, the peptides can be synthesized on modified cellulose discs and CelluSpot microarrays can be produced.

Screening and characterization of surface-tethered cationic peptides for antimicrobial activity.

There is an urgent need to coat the surfaces of medical devices, including implants, with antimicrobial agents to reduce the risk of infection. A peptide array technology was modified to permit the screening of short peptides for antimicrobial activity while tethered to a surface. Cellulose-amino-hydroxypropyl ether (CAPE) linker chemistry was used to synthesize, on a cellulose support, peptides that remained covalently bound during biological assays. Among 122 tested sequences, the best surface-tethered 9-, 12-, and 13-mer peptides were found to be highly antimicrobial against bacteria and fungi, as confirmed using alternative surface materials and coupling strategies as well as coupling through the C and N termini of the peptides. Structure-activity modeling of the structural features determining the activity of tethered peptides indicated that the extent and positioning of positive charges and hydrophobic residues were influential in determining activity.

The spot technique: synthesis and screening of peptide macroarrays on cellulose membranes.

Peptide arrays are a widely used tool for drug development. For peptide-based drug design it is necessary to screen a large number of peptides. However, there are often difficulties with this approach. Most common peptide synthesis techniques are able to simultaneously synthesize only up to a few hundred single peptides. Spot synthesis is a positionally addressable, multiple synthesis technique offering the possibility of synthesizing and screening up to 10,000 peptides or peptide mixtures on cellulose or other membrane surfaces. In this chapter we present the basic procedures and screening methods related to spot synthesis and outline protocols for easy-to-use detection methods on these peptide arrays.

Protein labeling and biotinylation of peptides during spot synthesis using biotin p-nitrophenyl ester (biotin-ONp).

Biotin-labeled peptides are used for numerous biochemical and microbiological applications. Due to the strong affinity of biotin to streptavidin, the detection of biotinylated molecules is very sensitive. A powerful technique for parallel synthesis and high-throughput screening of peptides is the spot synthesis. One example for the use of spot synthesis is the screening of biotinylated peptides synthesized on cellulose membranes, which is particularly favorable for the investigation of protease cleavage sites. Additionally, in combination with biotinylated protein samples, the spot technique can be used for investigations of peptide-protein and protein-protein interactions. Here, we present our results of the use biotin p-nitrophenyl ester (biotin-ONp) in spot synthesis and as a reagent for biotin-labeling of protein samples.

Peptide arrays on cellulose support: SPOT synthesis, a time and cost efficient method for synthesis of large numbers of peptides in a parallel and addressable fashion.

Peptide synthesis on cellulose using SPOT technology allows the parallel synthesis of large numbers of addressable peptides in small amounts. In addition, the cost per peptide is less than 1% of peptides synthesized conventionally on resin. The SPOT method follows standard fluorenyl-methoxy-carbonyl chemistry on conventional cellulose sheets, and can utilize more than 600 different building blocks. The procedure involves three phases: preparation of the cellulose membrane, stepwise coupling of the amino acids and cleavage of the side-chain protection groups. If necessary, peptides can be cleaved from the membrane for assays performed using soluble peptides. These features make this method an excellent tool for screening large numbers of peptides for many different purposes. Potential applications range from simple binding assays, to more sophisticated enzyme assays and studies with living microbes or cells. The time required to complete the protocol depends on the number and length of the peptides. For example, 400 9-mer peptides can be synthesized within 6 days.

Sequence requirements and an optimization strategy for short antimicrobial peptides.

Short antimicrobial host-defense peptides represent a possible alternative as lead structures to fight antibiotic resistant bacterial infections. Bac2A is a 12-mer linear variant of the naturally occurring bovine host defense peptide, bactenecin, and demonstrates moderate, broad-spectrum antimicrobial activity against Gram-positive and Gram-negative bacteria as well as against the yeast Candida albicans. With the assistance of a method involving peptide synthesis on a cellulose support, the primary sequence requirements for antimicrobial activity against the human pathogen Pseudomonas aeruginosa of 277 Bac2A variants were investigated by using a luciferase-based assay. Sequence scrambling of Bac2A led to activities ranging from superior or equivalent to Bac2A to inactive, indicating that good activity was not solely dependent on the composition of amino acids or the overall charge or hydrophobicity, but rather required particular linear sequence patterns. A QSAR computational analysis was applied to analyze the data resulting in a model that supported this sequence pattern hypothesis. The activity of selected peptides was confirmed by conventional minimal inhibitory concentration (MIC) analyses with a panel of human pathogen bacteria and fungi. Circular-dichroism (CD) spectroscopy with selected peptides in liposomes and membrane depolarization assays were consistent with a relationship between structure and activity. An additional optimization process was performed involving systematic amino acid substitutions of one of the optimal scrambled peptide variants, resulting in superior active peptide variants. This process provides a cost and time effective enrichment of new candidates for drug development, increasing the chances of finding pharmacologically relevant peptides.