Potential Associations Between Vitamin Intake and Leukemia: A Cross-Sectional Study.

The present study assessed potential associations between vitamin intake and leukemia in a national sample of adults in the United States. A total of 5520 participants were included in this cross-sectional study to investigate the relationship between vitamin intake (including vitamins A, C, D, and E) and leukemia. Results revealed negative associations between vitamin C and E intake and leukemia, whereas associations between vitamin A and D and leukemia were not statistically significant. For vitamin C, compared with the first tertile, the odds ratio (OR) and corresponding 95% confidential interval (CI) was 0.90 (0.75-0.95) for the second tertile and 0.82 (0.61-0.90) for the third tertile (p < 0.01). For vitamin E, compared with the first tertile, the OR and 95% CI was 0.92 (0.80-0.96) for the second tertile and 0.86 (0.71-0.92) for the third tertile (p < 0.01). Furthermore, the inverse relationship between intake of vitamins C and E and leukemia were more evident for individuals ≥60 years of age and those with a body mass index >30 kg/m2. Results of this study provide evidence suggesting that intake of vitamin C and E intake may decrease the prevalence of leukemia; however, further large-scale prospective cohort studies are needed to verify these findings.

Nitrogen-Doped Carbon Dots Enhanced Hydrogen Carbonate-Hydrogen Peroxide Chemiluminescent Reaction and its Application in Ascorbic Acid Sensing.

Nitrogen-doped carbon dots (N-CDs) were prepared by self-exothermic procedure using grasshopper powder as a single precursor. The prepared N-CDs not only have excellent fluorescence properties, but also can catalyze and enhance the ultra-weak chemiluminescence of NaHCO3-H2O2. The reaction conditions of NaHCO3-H2O2-N-CDs CL were optimized. Under the optimal experimental conditions, when AA was added to the NaHCO3-H2O2-N-CDs CL system, AA had a significant inhibitory effect on the CL intensity of NaHCO3-H2O2-N-CDs. There was a good linear relationship between the calculated lg(I0/I) and the concentration of AA (C), and the calibration curve equation was lg(I0/I) = 0.03667 C-0.00708 (µM). The established CL analysis method has a detection limit of 0.12 µM for AA and a linear range of 0-50 µM. The selectivity of CL method was evaluated, and the method was successfully applied to the determination of AA in vegetable and fruit samples. The spiked recoveries were between 88.9% and 118.9%, which indicated that the method was simple, rapid, and sensitive, and had great potential in the determination of AA in foods.

Fluorescent Molybdenum Disulfide Quantum Dots for Sensitive Detecting Curcumin in Food Samples through FRET Mechanism.

A selective and sensitive fluorometric assay was developed for specific determination of curcumin (Cur) based on fluorescence resonance energy transfer (FRET) between molybdenum disulfide quantum dots (MoS2 QDs) and Cur. The MoS2 QDs were prepared via a one-step hydrothermal protocol using sodium molybdate dihydrate, L-cysteine (Cys) as precursors, and sodium cholate (SC) as a modification agent. The as-prepared MoS2 QDs possessed maximum fluorescence emission at 460 nm with a 20% of fluorescence quantum yield (FQY). It was found that the fluorescence of MoS2 QDs could be quantitatively quenched by Cur through FRET mechanism. Therefore, Cur could be detected in the range of 0.1-20 µg mL- 1 with a detection limit of 5 ng mL- 1. Additionally, the developed MoS2 QDs based fluorescent assay has been successfully applied for real food sample analysis with satisfactory results.

Ionic liquid-functionalized mesoporous multipod silica for simultaneously effective extraction of aflatoxin B1 and its two precursors from grain.

BACKGROUND: Aflatoxin B1 (AFB1) and its precursors contaminate food and agricultural products, posing a significant risk to food safety and human health, but simultaneous and effective extraction and determination of AFB1 and its precursors with varied structures is still a challenging task. RESULTS: In this study, a bisimidazolium-type ionic liquid functionalized mesoporous multipod silica (SiO2@mPMO-IL(im)2) was fabricated to extract AFB1 and its two precursors, i.e., averantin and sterigmatocystin. The SiO2@mPMO-IL(im)2 could simultaneously extract three targets with varied structures based on the multipods, mesopores, and multifunctional groups. The density functional theory calculations further verified the multiple interactions between SiO2@mPMO-IL(im)2 and targets. The fabricated SiO2@mPMO-IL(im)2 could effectively extract and determine three targets in grains by combing with dispersive solid-phase extraction and high-performance liquid chromatography. Good linearity (r2 > 0.9978), low LODs (0.9-1.5 µg kg-1) and LOQs (3.0-4.5 µg kg-1), satisfactory spiked recoveries (92.5%-106.8%) and high precisions (RSD<6.4%) were observed. SIGNIFICANCE AND NOVELTY: This work demonstrates the feasibility of SiO2@mPMO-IL(im)2 for simultaneous and effective extraction of toxins with varied structures and provides a promising sample preparation for the analysis of AFB1 and its precursors in grain samples.

Construction of MOFs@COFs composite material as stationary phase for efficient separation of diverse organic compounds.

BACKGROUND: The development of efficent chromatographic stationary phases (SP) with mixed-mode or multiple interactions in high-performance liquid chromatography (HPLC) for the separation of complex samples is a challenging task. Metal organic frameworks (MOFs)-based SP can provide desired multiple interactions and enable the separation of a diverse range of solutes, but have limitations of low column efficiency and poor stability. RESULTS: Herein, the hybrid MOFs@Covalent organic frameworks (COFs) materials were used as SP in HPLC due to their synergistic structural features. The SiO2@NH2-UiO-66@CTF SP was synthesized by integration of NH2-UiO-66 and covalent triazine framework (CTF) onto silica surface. Due to the unique structure of SiO2@NH2-UiO-66@CTF with hierarchical-pores, this column showed higher column efficiency (up to 49,369 plates m-1 for alkylbenzenes) than the reported columns packed with MOFs-based SP. Owing to the Zr4+-N coordination bonding between CTF and NH2-UiO-66, the structural stability of SiO2@NH2-UiO-66@CTF can be improved. Furthermore, this new column exhibited remarkable column stability with relative standard deviation of retention time of <0.40% after 400 injections. With the combined advantages of multifunctional properties, high column efficiency, and good stability, SiO2@NH2-UiO-66@CTF SP showed excellent selectivity for the separation of a variety of hydrophobic, aromatic, heteroatomic, and hydrophilic analytes. SIGNIFICANCE AND NOVELTY: This work not only offers a promising SP with multiple retention mechanisms for HPLC, but also provides an efficient strategy for development of high column efficiency MOFs-based SP with good stability. Moreover, the MOFs@COFs hybrid materials were expanded in application area through this study, and the research results can also afford the foundation for further explore its structural characteristics.

Simple and rapid ionic liquid-based one-, two-, three-phase transition microextraction for efficient extraction of trace organic pollutants and elimination of lipid co-extractives from fatty food matrices.

Extraction of trace contaminants from fatty food matrices is challenging in food analysis. Herein, a new ionic liquid-based one-, two-, three-phase transition microextraction (IL-OTTPTME) was proposed to efficiently extract trace targets while simultaneously eliminating lipid co-extractives. The method performance was illustrated through the determination of chrysoidine in fatty soybean products using high-performance liquid chromatography-ultraviolet/visible detection. The strong interactions and infinite contact between IL and chrysoidine in the one-phase system ensured ultra-high extraction efficiency (∼100 %). Density functional theoretical calculations confirmed the presence of strong hydrogen bonding and π-π interactions. The formation of the three-phase system during extraction could completely eliminate lipid co-extractives. The IL-OTTPTME integrated extraction, enrichment and cleanup steps into one step, making it rapid and extremely easy to operate. The method had a wide linear range of 0.5-5000 µg/kg and low limit of detection (0.15 µg/kg). It also had satisfactory relative recoveries (95.1 %-104.0 %) and low RSDs (≤5.0 %, n = 5).

Electrochemiluminescence resonance energy transfer between Ru(bpy)32+@Cu3(HHTP)2 and GO-Au composites for C-reactive protein detection.

Designing innovative electrochemiluminescence (ECL) immunosensors is critical for the detection of biomarkers with a low concentration and the precise evaluation of clinical diseases. Herein, a Cu3(hexahydroxytriphenylene)2 (Cu3(HHTP)2) nanoflake-based sandwich-type ECL immunosensor was constructed for C-Reactive Protein (CRP) detection. The Cu3(HHTP)2 nanoflake, an electronically conductive metal-organic framework (MOF), has a periodically arranged porous structure with a cavity size of 2 nm, which not only accommodates a large amount of Ru(bpy)32+ but also confines the spatial diffusion of active species. Therefore, the Ru(bpy)32+-loaded Cu3(HHTP)2 nanocomplex (Ru@CuMOF) as an ECL emitter exhibits an enhanced ECL efficiency. The ECL resonance energy transfer (ECL-RET) was accomplished by combining Ru@CuMOF used as a donor with gold nanoparticles-functionalized graphene oxide nanosheets (GO-Au) utilized as an acceptor. This should be ascribed to the fact that the ECL emission spectrum of Ru@CuMOF shows the strongest signal intensity at 615 nm, overlapping with the absorption spectrum of GO-Au at 580-680 nm. Targeted detection of CRP in human serum samples was achieved by the sandwich-type immunosensor based on the ECL-RET mechanism with a 0.26 pg mL-1 detection limit. The electro-activated hybrids of Cu3(HHTP)2 and ECL emitters provide a new sensing strategy for the high-sensitivity detection of disease markers.

Gram-scale synthesis of nitrogen-doped carbon dots from locusts for selective determination of sunset yellow in food samples.

Locust powder was converted into water-soluble fluorescent nitrogen-doped carbon dots (N-CDs) with gram-scale yield through a self-exothermic reaction between nitric acid and diethylenetriamine (DETA) within 10 min. The morphology, elemental information, and optical properties of the N-CDs were characterized using high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared, ultraviolet-visible and fluorescence spectroscopy. Spectroscopic investigation indicated that the fluorescence emission behaviour of N-CDs is excitation wavelength dependent, with the strongest emission peak at 470 nm using a 390 nm excitation wavelength. The strong absorption peak of sunset yellow (SY) at 482 nm overlaps substantially with the blue emission peak (470 nm) of N-CDs. This enables the fluorescence emission of N-CDs to be obviously quenched by SY through the inner filter effect. There was a good linear relationship between the fluorescence quenching degree and the concentrations of SY within the range 0.5-40 µM. The detection limit of developed fluorescence assay for SY is 28 nM, and the relative standard deviation is 2.3% (c = 10 µM). The N-CDs derived from locusts by the self-exothermic reaction are highly selective and sensitive fluorescent probes for SY, which were applied to the fluorescence sensing of SY in different food samples with satisfactory results.

'Turn-on' fluorescence sensing of hydrogen peroxide in marine food samples using a carbon dots-MnO2 probe.

A 'turn-on' fluorescence method for detection of hydrogen peroxide (H2 O2 ) in marine food samples is presented in this article. Using this method, a carbon dots (CDs)-MnO2 probe was formed in which fluorescence intensity (FI) of CDs was quenched through fluorescence resonance energy transfer by addition of MnO2 nanosheets. When H2 O2 was added into the CDs-MnO2 solution, the MnO2 nanosheets formed Mn2+ ions due to a redox reaction between H2 O2 and MnO2 nanosheets, and CD FI was recovered. Under optimized conditions, the detection limit for H2 O2 was 0.87 µM, and analytical linear range was 4-100 µM. Furthermore, this developed fluorescence sensing system was successfully used with satisfactory results to determine trace H2 O2 content in marine food samples.

Porous covalent triazine-terphenyl polymer as hydrophilic-lipophilic balanced sorbent for solid phase extraction of tetracyclines in animal derived foods.

A novel hydrophilic-lipophilic balanced (HLB) solid phase extraction sorbent, microporous covalent triazine-terphenyl polymer (CTPCC-TP) was successfully synthesized and applied for the cleanup and extraction of tetracycline drugs in animal derived food samples. The specific ratio of two monomers, hydrophilic triazine and lipophilic aromatic rings, endowed the new material with hydrophilic-lipophilic balanced character, which made it capable of extracting both polar and nonpolar analytes. Prior to solid-phase extraction, food samples were extracted by McIlvaine buffer and passed through the CTPCC-TP cartridge. The experimental parameters affecting extraction efficiency, including loading, washing and elution were investigated and optimized. With the use of high-performance liquid chromatography-UV detection, a method detection limit in the range of 8.0-16.8 µg kg-1 and good linearity (22.6-1500 µg kg-1) for the determination of the tetracyclines in animal derived food samples can be achieved. The relative standard deviations (RSDs) for five replicate extractions of the tetracyclines ranged from 4.8 to 8.2%. The method recoveries for spiked tetracyclines (100 and 1000 µg kg-1) in bovine milk, egg, chicken liver samples were in the range of 81.3-98.7% with RSDs ranging from 3.9 to 7.7%, respectively, depending on both the analytes and samples. The method was suitable for the determination of tetracyclines in animal derived food samples.

Carbon dots based dual-emission silica nanoparticles as ratiometric fluorescent probe for nitrite determination in food samples.

In this work, a simple and effective strategy for designing a ratiometric fluorescent nanosensor was described. A carbon dots (CDs) based dual-emission nanosensor for nitrite was prepared by coating the CDs on to dye-doped silica nanoparticles. Dual-emission silica nanoparticles fluorescence was quenched in sulfuric acid using potassium bromate (KBrO3). The nitrite present catalyzed the KBrO3 oxidation, resulting in ratiometric fluorescence response of the dual-emission silica nanoparticles. Several important parameters affecting the performance of the nanosensor were investigated. Under optimized conditions, the limit of detection was 1.0 ng mL-1 and the linear range 10-160 ng mL-1. Furthermore, the sensor was suitable for nitrite determination in different food samples.

Polymeric ionic liquid based on magnetic materials fabricated through layer-by-layer assembly as adsorbents for extraction of pesticides.

In this study, layer-by-layer assembly of polyelectrolyte multilayer films on magnetic silica provided a convenient and controllable way to prepare polymeric ionic liquid-based magnetic adsorbents. The resulting particles were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and magnetic measurements. The data showed that the magnetic particles had more homogeneous spherical shapes with higher saturation magnetization when compared to those obtained by free radical polymerization method. This facilitated the convenient collection of magnetic particles, with higher extraction repeatability. The extraction performance of the multilayer polymeric ionic liquid-based adsorbents was evaluated by magnetic solid-phase extraction of four pesticides including quinalphos, fenthion, phoxim, and chlorpropham. The data suggested that the extraction efficiency depended on the number of layers in the film. The parameters affecting the extraction efficiency were optimized, and good linearity ranging from 2 to 250µgL-1 was obtained with correlation coefficients of 0.9994-0.9998. Moreover, the proposed method presented low limit of detection (0.5µgL-1, S/N=3) and limit of quantification (1.5µgL-1, S/N=10), and good repeatability expressed by the relative standard deviation (2.0%-4.6%, n=5). The extraction recoveries of four pesticides were found to range from 58.9% to 85.8%. The reliability of the proposed method was demonstrated by analyzing environmental water samples, and the results revealed satisfactory spiked recovery, relative standard deviation, and selectivity.

Layer-by-layer self-assembly of polyelectrolyte multilayers on silica spheres as reversed-phase/hydrophilic interaction mixed-mode stationary phases for high performance liquid chromatography.

In this study, a series of stationary phases, comprising silica spheres and polyelectrolyte multilayers (PEMs) as the core and surface coating, respectively, were prepared via a layer-by-layer self-assembly approach for use in high-performance liquid chromatography. PEMs coatings were formed by the alternate deposition of positively charged poly(allylamine hydrochloride) and negatively charged poly(ethylene-alt-maleate) anions which were synthesized by esterification between poly(ethylene-alt-maleic anhydride) and n-alkyl alcohols (CnH2n+1OH, n=4, 8, 10, 12). The chromatographic performance and retention mechanism of the new stationary phases were evaluated in simultaneous reversed-phase/hydrophilic interaction mixed-mode chromatography using different solute probes, such as alkyl benzene, p-hydroxybenzoic acid and its esters, anilines, phenols, and pyrimidines. The separation performance of the new stationary phases was optimized by tuning the n-alkyl chain length of poly(ethylene-alt-maleate) and bilayer numbers of PEMs. These results indicated that the new stationary phases demonstrate promise for the simultaneous separation of complex hydrophobic and hydrophilic samples with high selectivity.

Carbon-dot-based dual-emission silica nanoparticles as a ratiometric fluorescent probe for Bisphenol A.

A simple and effective strategy for designing a ratiometric fluorescent nanosensor is described in this work. A carbon dots (CDs) based dual-emission nanosensor for Bisphenol A (BPA) was prepared by coating CDs on the surface of dye-doped silica nanoparticles. The fluorescence of dual-emission silica nanoparticles was quenched in hydrochloric acid by potassium bromate (KBrO3) oxidation; BPA inhibited KBrO3 oxidation, resulting in the ratiometric fluorescence response of dual-emission silica nanoparticles. Several important parameters affecting the performance of the nanosensor were investigated and optimized. The detection limit of this nanosensor was 0.80ng mL-1 with a linear range from 10 to 500ng mL-1. This was applied successfully to determine BPA in the leached solution of different plastic products with satisfactory results.

Dicationic polymeric ionic-liquid-based magnetic material as an adsorbent for the magnetic solid-phase extraction of organophosphate pesticides and polycyclic aromatic hydrocarbons.

Magnetic particles modified with a dicationic polymeric ionic liquid are described as a new adsorbent in magnetic solid-phase extraction. They were obtained through the copolymerization of a 1,8-di(3-vinylimidazolium)octane-based ionic liquid with vinyl-modified SiO2 @Fe3 O4 , and were characterized by FTIR spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The modified magnetic particles are effective in the extraction of organophosphate pesticides and polycyclic aromatic hydrocarbons. Also, they can provide different extraction performance for the selected analytes including fenitrothion, parathion, fenthion, phoxim, phenanthrene, and fluoranthene, where the extraction efficiency is found to be in agreement with the hydrophobicity of analytes. Various factors influencing the extraction efficiency, such as, the amount of adsorbent, extraction, and desorption time, and type and volume of the desorption solvent, were optimized. Under the optimized conditions, a good linearity ranging from 1-100 µg/L is obtained for all analytes, except for parathion (2-200 µg/L), where the correlation coefficients varied from 0.9960 to 0.9998. The limits of detection are 0.2-0.8 µg/L, and intraday and interday relative standard deviations are 1.7-7.4% (n = 5) and 3.8-8.0% (n = 3), respectively. The magnetic solid-phase extraction combined with high-performance liquid chromatography can be applied for the detection of trace targets in real water samples with satisfactory relative recoveries and relative standard deviations.

Determination of the acid values of edible oils via FTIR spectroscopy based on the OH stretching band.

A new method for determining the acid values (AVs) of edible oils based on the OH stretching band was developed. The oil sample was diluted with carbon tetrachloride and was placed in a quartz cuvette with a thickness of 1cm to record the FTIR spectrum. The peak at 3535cm(-1), which corresponds to the OH stretch of the carboxyl group in free fatty acids, together with the peak valley at 3508cm(-1) and the spectral data in the range of 3340-3390cm(-1) were used to determine the AV of the edible oil. The excellent linear relationship between the AVs measured in this work and those measured using a titration method, with a correlation coefficient (R) of 0.9929, indicates that the present procedure can be applied as an alternative to the classic method for determining the AVs of edible oils.

Polyelectrolyte multilayers on magnetic silica as a new sorbent for the separation of trace copper in food samples and determination by flame atomic absorption spectrometry.

A novel magnetic silica sorbent with polyelectrolyte multilayers (PEMs) on its surface was prepared, and the sorbent was used for the magnetic solid phase extraction (MSPE) of trace Cu(2+) in drinking water with flame atomic absorption spectrometry (FAAS) as the detector. The experimental parameters for the MSPE procedure, such as the pH, desorption conditions, ultrasonic time and co-existing ions effects, were investigated. The adsorption capacity of the new sorbent was 14.7 mg g(-1) for Cu(2+). The detection limit of the developed method was 0.23 ng mL(-1) for Cu(2+) with an enrichment factor of 95.7. The analytical data obtained from the certified reference water and rice samples were in good agreement with the certified values. This method was also successfully applied to the determination of trace Cu(2+) in different food samples with satisfactory results.

Poly(ionic liquid) immobilized magnetic nanoparticles as new adsorbent for extraction and enrichment of organophosphorus pesticides from tea drinks.

New poly(ionic liquid) immobilized magnetic nanoparticles (PIL-MNPs) were synthesized via co-polymerization of 1-vinyl-3-hexylimidazolium-based ionic liquid and vinyl-modified magnetic particles and were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and magnetic measurements. The PIL-MNPs were utilized as adsorbent phases in magnetic solid-phase extraction (MSPE). The extraction and enrichment efficiency were evaluated by using four organophosphorus pesticides (parathion, fenthion, phoxim and temephos) as test analytes. Various parameters, such as amount of adsorbent, adsorption time, desorption solvent and time, and ionic strength were investigated. The proposed method showed good linearity for the analytes in the concentration range of 1-200µgL(-1) with a correlation coefficient (R)>0.9963. Low limit of detection of 0.01µgL(-1) and high enrichment factors ranging from 84 to 161 were achieved. The proposed method has been successfully used to determine organophosphorus pesticides from three tea drink samples with satisfactory recovery of 81.4-112.6% and RSDs of 4.5-11.3%. The PIL-MNP adsorbent can be reused for 20 times without a noticeable decrease in extraction efficiency.

Macrocyclic polyamine-functionalized silica as a solid-phase extraction material coupled with ionic liquid dispersive liquid-liquid extraction for the enrichment of polycyclic aromatic hydrocarbons.

In this study, silica modified with a 30-membered macrocyclic polyamine was synthesized and first used as an adsorbent material in SPE. The SPE was further combined with ionic liquid (IL) dispersive liquid-liquid microextraction (DLLME). Five polycyclic aromatic hydrocarbons were employed as model analytes to evaluate the extraction procedure and were determined by HPLC combined with UV/Vis detection. Acetone was used as the elution solvent in SPE as well as the dispersive solvent in DLLME. The enrichment of analytes was achieved using the 1,3-dibutylimidazolium bis[(trifluoromethyl)sulfonyl]imide IL/acetone/water system. Experimental conditions for the overall macrocycle-SPE-IL-DLLME method, such as the amount of adsorbent, sample solution volume, sample solution pH, type of elution solvent as well as addition of salt, were studied and optimized. The developed method could be successfully applied to the analysis of four real water samples. The macrocyclic polyamine offered higher extraction efficiency for analytes compared with commercially available C18 cartridge, and the developed method provided higher enrichment factors (2768-5409) for model analytes compared with the single DLLME. Good linearity with the correlation coefficients ranging from 0.9983 to 0.9999 and LODs as low as 0.002 µg/L were obtained in the proposed method.

Immobilization of lead in soil influenced by soluble phosphate and calcium: lead speciation evidence.

We investigated the effect of soluble Ca on the speciation of Pb in phosphate-amended soils. A calcareous soil was amended in sequence with soluble phosphate (0 and 299 mg kg P), calcium nitrate (0, 200, and 400 mg kg Ca), and/or lead nitrate (0 and 1000 mg kg Pb) and incubated for 50 d. Extractable Ca was relatively similar across all samples, with a minor reduction in Ca release for treatments amended with P possibly from the formation of Ca-phosphate minerals. Olsen-P extractability from P-added treatments was highest in the non-Pb-amended soils and was about 40% lower when Pb was added as a result of Pb-phosphate formation. In the absence of P, diethylene triamine pentaacetic acid (DTPA)-Pb extractability increased with increasing Ca amendment; however, in the P-amended treatments, DTPA-Pb decreased with increasing Ca addition. X-ray absorption spectroscopy results of the Pb spiked soils indicate that adsorbed Pb is the primary phase (up to 92%) in non-P-amended soils with minor distribution to hydrocerussite and Pb-phosphate phases. In the P-amended treatments, Pb speciation shifted to Pb-phosphate [chloropyromorphite and Pb(PO)] (42-48%) and adsorbed Pb (44-50%). As Ca concentration increased in the P-amended soils, Pb-phosphate speciation moved from combined chloropyromorphite and Pb(PO) (0 mg kg Ca) to exclusively chloropyromorphite. The study demonstrates that soluble Ca enhances Pb immobilization with P amendments.