Synergistic promotion of nitrogen vacancies and single atomic dopants on Pt/C3N4 for photocatalytic hydrogen evolution.

C3N4 is widely applied in the synthesis of single-atom catalysts. However, understanding on the active site and the reaction mechanism is not fully in consensus. Especially, bare studies have considered the coordination environment of the single-atomic dopant and the effect of nitrogen vacancy on C3N4. In this study, we found that the presence of nitrogen vacancies promotes the activation of water and reduces the activation energy barrier for hydrogen generation. The results show that a synergistic effect between single-atom Pt and nitrogen vacancies enables the catalyst to achieve a superior hydrogen production rate of 3,890 µmol/g/h, which is 16.8 times higher than that of pristine C3N4. Moreover, the catalyst is also applicable for photocatalytic hydrogen production from seawater without significantly decreased hydrogen production rate. This study paves the way for the rational design and optimization of next-generation photocatalysts for sustainable energy applications, particularly in solar-driven hydrogen production.

Design and Performance of Small-Molecule Donors with Donor-π-Acceptor Architecture Toward Vacuum-Deposited Organic Photovoltaics Having Heretofore Highest Short-Circuit Current Density.

The development of high-performance organic photovoltaic materials is of crucial importance for the commercialization of organic solar cells (OSCs). Herein, two structurally simple donor-π-conjugated linker-acceptor (D-π-A)-configured small-molecule donors with methyl-substituted triphenylamine as D unit, 1,1-dicyanomethylene-3-indanone as A unit, and thiophene or furan as π-conjugated linker, named DTICPT and DTICPF, are developed. DTICPT and DTICPF are facilely prepared via a two-step synthetic process with simple procedures. DTICPF with a furan π-conjugated linker exhibits stronger and broader optical absorption, deeper highest occupied molecular orbital (HOMO) energy levels, and better charge transport, compared to its thiophene analog DTICPT. As a result, vacuum-deposited OSCs based on DTICPF: C70 show an impressive power conversion efficiency (PCE) of 9.36% (certified 9.15%) with short-circuit current density (Jsc) up to 17.49 mA cm-2 (certified 17.56 mA cm-2), which is the highest Jsc reported so far for vacuum-deposited OSCs. Besides, devices based on DTICPT: C70 and DTICPF: C70 exhibit excellent long-term stability under different aging conditions. This work offers important insights into the rational design of D-π-A configured small-molecule donors for high efficient and stable vacuum-deposited OSCs.

A stabilization rule for metal carbido cluster bearing µ3-carbido single-atom-ligand encapsulated in carbon cage.

Metal carbido complexes bearing single-carbon-atom ligand such as nitrogenase provide ideal models of adsorbed carbon atoms in heterogeneous catalysis. Trimetallic µ3-carbido clusterfullerenes found recently represent the simplest metal carbido complexes with the ligands being only carbon atoms, but only few are crystallographically characterized, and its formation prerequisite is unclear. Herein, we synthesize and isolate three vanadium-based µ3-CCFs featuring V = C double bonds and high valence state of V (+4), including VSc2C@Ih(7)-C80, VSc2C@D5h(6)-C80 and VSc2C@D3h(5)-C78. Based on a systematic theoretical study of all reported µ3-carbido clusterfullerenes, we further propose a supplemental Octet Rule, i.e., an eight-electron configuration of the µ3-carbido ligand is needed for stabilization of metal carbido clusters within µ3-carbido clusterfullerenes. Distinct from the classic Effective Atomic Number rule based on valence electron count of metal proposed in the 1920s, this rule counts the valence electrons of the single-carbon-atom ligand, and offers a general rule governing the stabilities of µ3-carbido clusterfullerenes.

Topically applied fullerenols protect against radiation dermatitis by scavenging reactive oxygen species.

Adverse skin reactions caused by ionizing radiation are collectively called radiation dermatitis (RD), and the use of nanomedicine is an attractive approach to this condition. Therefore, we designed and large-scale synthesized fullerenols that showed free radical scavenging ability in vitro. Next, we pretreated X-ray-exposed cells with fullerenols. The results showed that pretreatment with fullerenols significantly scavenged intracellular reactive oxygen species (ROS) produced and enhanced the antioxidant capacity, protecting skin cells from X-ray-induced DNA damage and apoptosis. Moreover, we induced RD in mice by applying 30 Gy of X-ray irradiation, followed by treatment with fullerenols. We found that after treatment, the RD scores dropped, and the histological results systematically demonstrated that topically applied fullerenols could reduce radiation-induced skin epidermal thickening, collagen deposition and skin appendage damage and promote hair regeneration after 35 days. Compared with Trolamine cream, a typical RD drug, fullerenols showed superior radiation protection. Overall, the in vitro and in vivo experiments proved that fullerenols agents against RD.

Two Metastable Endohedral Metallofullerenes Sc2C2@C1(39656)-C82 and Sc2C2@C1(51383)-C84: Direct-C2-Insertion Products from Their Most Stable Precursors.

Endohedral metallofullerenes (EMFs) are sub-nano carbon materials with diverse applications, yet their formation mechanism, particularly for metastable isomers, remains ambiguous. The current theoretical methods focus mainly on the most stable isomers, leading to limited predictability of metastable ones due to their low stabilities and yields. Herein, we report the successful isolation and characterization of two metastable EMFs, Sc2C2@C1(39656)-C82 and Sc2C2@C1(51383)-C84, which violate the isolated pentagon rule (IPR). These two non-IPR EMFs exhibit a rare case of planar and pennant-like Sc2C2 clusters, which can be considered hybrids of the common butterfly-shaped and linear configurations. More importantly, the theoretical results reveal that despite being metastable, these two non-IPR EMFs survived as the products from their most stable precursors, Sc2C2@C2v(5)-C80 and Sc2C2@Cs(6)-C82, via a C2 insertion during the post-formation annealing stages. We propose a systematic theoretical method for predicting metastable EMFs during the post-formation stages. The unambiguous molecular-level structural evidence, combined with the theoretical calculation results, provides valuable insights into the formation mechanisms of EMFs, shedding light on the potential of post-formation mechanisms as a promising approach for EMF synthesis.

Plasmon-Mediated Photoelectrochemical Hot-Hole Oxidation Coupling Reactions of Adenine on Nanostructured Silver Electrodes.

Surface-enhanced Raman spectroscopy (SERS) has been widely applied in the identification and characterization of DNA structures with high efficiency. Especially, the SERS signals of the adenine group have exhibited high detection sensitivity in several biomolecular systems. However, there is still no unanimous conclusion regarding the interpretation of some special kinds of SERS signals of adenine and its derivatives on silver colloids and electrodes. This Letter presents a new photochemical azo coupling reaction for adenyl residues, in which the adenine is selectively oxidized to (E)-1,2-di(7H-purin-6-yl) diazene (azopurine) in the presence of silver ions, silver colloids, and electrodes of nanostructures under visible light irradiation. The product, azopurine, is first found to be responsible for the SERS signals. This photoelectrochemical oxidative coupling reaction of adenine and its derivatives is promoted by plasmon-mediated hot holes and is regulated by positive potentials and pH of solutions, which opens up new avenues for studying azo coupling in the photoelectrochemistry of adenine-containing biomolecules on electrode surfaces of plasmonic metal nanostructures.

Monometallic Endohedral Azafullerene.

Azafullerenes derived from nitrogen substitution of carbon cage atoms render direct modifications of the cage skeleton, electronic, and physicochemical properties of fullerene. Gas-phase ionized monometallic endohedral azafullerene (MEAF) [La@C81N]+ formed via fragmentation of a La@C82 monoadduct was detected in 1999, but the pristine MEAF has never been synthesized. Here, we report the synthesis, isolation, and characterization of the first pristine MEAF La@C81N, tackling the two-decade challenge. Single-crystal X-ray diffraction study reveals that La@C81N has an 82-atom cage with a pseudo C3v(8) symmetry. According to DFT computations, the nitrogen substitution site within the C82 cage is proposed to locate at a hexagon/hexagon/pentagon junction far away from the encapsulated La atom. La@C81N exists in stable monomer form with a closed-shell electronic state, which is drastically different from the open-shell electronic state of the original La@C82. Our breakthrough in synthesizing a new type of azafullerene offers a new insight into the skeletal modification of fullerenes.

Self-driven carbon atom implantation into fullerene embedding metal-carbon cluster.

Hundreds of members have been synthesized and versatile applications have been promised for endofullerenes (EFs) in the past 30 y. However, the formation mechanism of EFs is still a long-standing puzzle to chemists, especially the mechanism of embedding clusters into charged carbon cages. Here, based on synthesis and structures of two representative vanadium-scandium-carbido/carbide EFs, VSc2C@Ih (7)-C80 and VSc2C2@Ih (7)-C80, a reasonable mechanism-C1 implantation (a carbon atom is implanted into carbon cage)-is proposed to interpret the evolution from VSc2C carbido to VSc2C2 carbide cluster. Supported by theoretical calculations together with crystallographic characterization, the single electron on vanadium (V) in VSc2C@Ih (7)-C80 is proved to facilitate the C1 implantation. While the V=C double bond is identified for VSc2C@Ih (7)-C80, after C1 implantation the distance between V and C atoms in VSc2C2@Ih (7)-C80 falls into the range of single bond lengths as previously shown in typical V-based organometallic complexes. This work exemplifies in situ self-driven implantation of an outer carbon atom into a charged carbon cage, which is different from previous heterogeneous implantation of nonmetal atoms (Group-V or -VIII atoms) driven by high-energy ion bombardment or high-pressure offline, and the proposed C1 implantation mechanism represents a heretofore unknown metal-carbon cluster encapsulation mechanism and can be the fundamental basis for EF family genesis.

Molecular Tweezer Based on Perylene and Crown Ether for Selective Recognition of Fullerenes.

A molecular tweezer trans-di(perylene-3-ylmethanaminobenzo)-18-crown-6 (DP-18C6) incorporating two perylene subunits in a single crown ether core was designed and synthesized as a host for fullerenes. Through the cooperative effect of the perylene subunits and the crown ether moiety, DP-18C6 can efficiently recognize fullerenes including C60, C70, and C76. 1H NMR titration and fluorescence titration experiments demonstrated that DP-18C6 can effectively grasp the fullerene molecule to form a 1:1 host-guest complex. Density functional theory calculations revealed the presence of intermolecular π-π interactions between the perylene subunits of DP-18C6 and the fullerene molecule. More importantly, DP-18C6 exhibited remarkably high binding selectivity for higher fullerenes over C60, revealing potential application for the separation of fullerenes by means of host-guest interactions.

Carbene Addition Isomers of C70 formed in the Flame of Low-Pressure Combustion.

In the flames during low-pressure combustion, not only a rich variety of fullerenes but also many reactive intermediates can be produced (e.g., carbene, CH2) that are short-lived and cannot be stabilized directly under normal circumstances. These intermediates can be captured by fullerene carbon cages for stabilization. In this paper, three C71H2 isomers were synthesized in situ in low-pressure benzene-acetylene-oxygen diffusion flame combustion. The results, which were unambiguously characterized by single-crystal X-ray diffraction, show that the three isomers are carbene addition products of D5h-C70 on different sites. The relative energies and stability of different C71H2 isomers are revealed by Ultraviolet-Visible (UV-Vis) absorption spectroscopy, in combination with theoretical calculations, in this work. Both the in situ capture and theoretical study of these C71H2 isomers in low-pressure combustion will provide more information regarding carbene additions to other fullerenes or other carbon clusters at high temperatures.

Real-Time Sniffing Mass Spectrometry Aided by Venturi Self-Pumping Applicable to Gaseous and Solid Surface Analysis.

Based on the Venturi self-pumping effect, real-time sniffing with mass spectrometry (R-sniffing MS) is developed as a tool for direct and real-time mass spectrometric analysis of both gaseous and solid samples. It is capable of dual-mode operation in either gaseous or solid phase, with the corresponding techniques termed as Rg-sniffing MS and Rs-sniffing MS, respectively. In its gaseous mode, Rg-sniffing MS is capable of analyzing a gaseous mixture with response time (0.8-2.1 s rise time and 7.3-9.6 s fall time), spatial resolution (<80 µm), three-dimensional diffusion imaging, and aroma distribution imaging of red pepper. In its solid mode, an appropriate solvent droplet desorbs the sample from a solid surface, followed by the aspiration of the mixture using the Venturi self-pumping effect into the mass spectrometer, wherein it is ionized by a standard ion source. Compared with the desorption electrospray ionization (DESI) technique, Rs-sniffing MS demonstrated considerably improved limit of detection (LOD) values for arginine (0.07 µg/cm2 Rs-sniffing vs 1.47 µg/cm2 DESI), thymopentin (0.10 µg/cm2 vs 2.67 µg/cm2), and bacitracin (0.16 µg/cm2 vs 2.28 µg/cm2). Rs-sniffing is applicable for the detection of C60(OCH3)6Cl-, an intermediate in the methoxylation reaction involving C60Cl6 (solid) and methanol (liquid). The convenient and highly sensitive R-sniffing MS has a characteristic separation of desorption from the ionization process, in which the matrix atmosphere of desorption can be interfaced by a pipe channel and self-pumped by the Venturi effect with consequent integration using a standard ion source. The R-sniffing MS operates in a voltage-, heat-, and vibration-free environment, wherein the analyte is ionized by a standard ion source. Consequently, a wide range of samples can be analyzed simultaneously by the R-sniffing MS technique, regardless of their physical state.

Capturing nonclassical C70 with double heptagons in low-pressure combustion.

A double-heptagon-containing C70H6 (dihept-C70H6) was isolated and unambiguously characterized in the soot of low-pressure combustion, which shares the identical heptagonal cage as dihept-C70Cl6 previously identified in the products of carbon arc, and thus represents the first nonclassical fullerene isolable in both carbon arc and combustion.

Room-temperature logic-in-memory operations in single-metallofullerene devices.

In-memory computing provides an opportunity to meet the growing demands of large data-driven applications such as machine learning, by colocating logic operations and data storage. Despite being regarded as the ultimate solution for high-density integration and low-power manipulation, the use of spin or electric dipole at the single-molecule level to realize in-memory logic functions has yet to be realized at room temperature, due to their random orientation. Here, we demonstrate logic-in-memory operations, based on single electric dipole flipping in a two-terminal single-metallofullerene (Sc2C2@Cs(hept)-C88) device at room temperature. By applying a low voltage of ±0.8 V to the single-metallofullerene junction, we found that the digital information recorded among the different dipole states could be reversibly encoded in situ and stored. As a consequence, 14 types of Boolean logic operation were shown from a single-metallofullerene device. Density functional theory calculations reveal that the non-volatile memory behaviour comes from dipole reorientation of the [Sc2C2] group in the fullerene cage. This proof-of-concept represents a major step towards room-temperature electrically manipulated, low-power, two-terminal in-memory logic devices and a direction for in-memory computing using nanoelectronic devices.

Progress in Antiviral Fullerene Research.

Unlike traditional small molecule drugs, fullerene is an all-carbon nanomolecule with a spherical cage structure. Fullerene exhibits high levels of antiviral activity, inhibiting virus replication in vitro and in vivo. In this review, we systematically summarize the latest research regarding the different types of fullerenes investigated in antiviral studies. We discuss the unique structural advantage of fullerenes, present diverse modification strategies based on the addition of various functional groups, assess the effect of structural differences on antiviral activity, and describe the possible antiviral mechanism. Finally, we discuss the prospective development of fullerenes as antiviral drugs.

Surface Re-Engineering of Perovskites with Buckybowls to Boost the Inverted-Type Photovoltaics.

Despite their multifaceted advantages, inverted perovskite solar cells (PSCs) still suffer from lower power conversion efficiencies (PCEs) than their regular counterparts, which is largely due to recombination energy losses (Eloss) that arise from the chemical, physical, and energy level mismatches, especially at the interfaces between perovskites and fullerene electron transport layers (ETLs). To address this problem, we herein introduce an aminium iodide derivative of a buckybowl (aminocorannulene) that is molecularly layered at the perovskite-ETL interface. Strikingly, besides passivating the PbI2-rich perovskite surface, the aminocorannulene enforces a vertical dipole and enhances the surface n-type character that is more compatible with the ETL, thus boosting the electron extraction and transport dynamics and suppressing interfacial Eloss. As a result, the champion PSC achieves an excellent PCE of over 22%, which is superior compared to that of the control device (∼20%). Furthermore, the device stability is significantly enhanced, owing to a lock-and-key-like grip on the mobile iodides by the buckybowls and the resultant increase of the interfacial ion-migration barrier. This work highlights the potential of buckybowls for the multifunctional surface engineering of perovskite toward high-performance and stable PSCs.

Sulfur-Doped Quintuple [9]Helicene with Azacorannulene as Core.

Herein, a hetero(S,N)-quintuple [9]helicene (SNQ9H) molecule with an azacorannulene core was synthesized, currently representing the highest hetero-helicene reported in the field of multiple [n]helicenes. X-ray crystallography indicated that SNQ9H includes not only a propeller-shaped conformer SNQ9H-1, but also an unforeseen quasi-propeller-shaped conformer SNQ9H-2. Different conformers were observed for the first time in multiple [n≥9]helicenes, likely owing to the doping of heteroatomic sulfurs in the helical skeletons. Remarkably, the ratio of SNQ9H-1 to SNQ9H-2 can be regulated in situ by the reaction temperature. Experimental studies on the photophysical and redox properties of SNQ9H and theoretical calculations clearly demonstrated that the electronic structures of SNQ9H depend on their molecular conformations. The strategy of introducing heteroatomic sulfurs into the helical skeleton may be useful in constructing various conformers of higher multiple [n]helicenes in the future.

Nitrogen-Embedded Quintuple [7]Helicene: A Helicene-Azacorannulene Hybrid with Strong Near-Infrared Fluorescence.

Herein, a nitrogen-embedded quintuple [7]helicene (N-Q7H) with an azapentabenzocorannulene core, which can be considered to be a helicene/azacorannulene hybrid π-system, was synthesized from azapentabenzocorannulene in a three-step process. N-Q7H is the first example of a multiple helicene with an azabuckybowl core. Single-crystal X-ray diffractometry unambiguously confirmed the structure of the propeller-shaped hybrid π-system. Owing to nitrogen-atom doping in the multiple helicenes and effective hybridization between the helicene and azacorannulene, N-Q7H exhibits considerably redshifted absorption and emission (yellow-to-green color change and green-to-near-infrared fluorescence change) relative to the azapentabenzocorannulene core. The broad absorption from the ultraviolet-visible to the NIR region is ascribable to the allowed transition between the highest occupied molecular orbital and the lowest unoccupied molecular orbital after symmetry breaking, as revealed by density functional theory calculations. Compared to previous propeller-shaped multiple helicenes with corannulene or hexabenzocoronene (etc.) as cores, N-Q7H demonstrates a significantly higher NIR fluorescence quantum efficiency of 28%. Additionally, the chiral-resolution and redox properties of N-Q7H were investigated. The excellent photophysical and inherent chiral properties of N-Q7H suggest that azapentabenzocorannulene can be used as an outstanding nitrogen-embedded core to construct novel multiple helicenes with wide application potential, including as NIR fluorescent bio-probes.

Synthesis and Fluorescent Properties of Multi-Functionalized C70 Derivatives of C70(OCH3)10[C(COOEt)2] and C70(OCH3)10[C(COOEt)2]2.

Due to the partially reduced π-conjugation of the fullerene cage, multi-functionalized fullerene derivatives exhibit remarkable fluorescent properties compared to pristine fullerenes, which have high potential for application in organic light-emitting diodes (OLEDs). In this study two multi-functionalized C70 derivatives, C70(OCH3)10[C(COOEt)2] and C70(OCH3)10[C(COOEt)2]2, with excellent fluorescence properties, were designed and synthesized. Compared with C70(OCH3)10 containing a single kind of functional group, both the C70(OCH3)10[C(COOEt)2] and C70(OCH3)10[C(COOEt)2]2 exhibited enhanced fluorescence properties with blue fluorescence emission. The fluorescence quantum yields of the C70(OCH3)10[C(COOEt)2] and C70(OCH3)10[C(COOEt)2]2 were 1.94% and 2.30%, respectively, which were about ten times higher than that of C70(OCH3)10. The theoretical calculations revealed that the multi-functionalization of the C70 increased the S1-T1 energy gap, reducing the intersystem crossing efficiency, resulting in the higher fluorescence quantum yield of the C70 derivatives. The results indicate that multi-functionalization is a viable strategy to improve the fluorescence of fullerene derivatives.

Ambient-pressure synthesis of ethylene glycol catalyzed by C60-buffered Cu/SiO2.

Bulk chemicals such as ethylene glycol (EG) can be industrially synthesized from either ethylene or syngas, but the latter undergoes a bottleneck reaction and requires high hydrogen pressures. We show that fullerene (exemplified by C60) can act as an electron buffer for a copper-silica catalyst (Cu/SiO2). Hydrogenation of dimethyl oxalate over a C60-Cu/SiO2 catalyst at ambient pressure and temperatures of 180° to 190°C had an EG yield of up to 98 ± 1%. In a kilogram-scale reaction, no deactivation of the catalyst was seen after 1000 hours. This mild route for the final step toward EG can be combined with the already-industrialized ambient reaction from syngas to the intermediate of dimethyl oxalate.