RESUMO
There are two main types of carbon nanotubes (CNTs): metallic and semiconducting. Naturally grown CNTs are randomly distributed, posing challenges in distinguishing between the two types. Here, a novel approach for nanoscale high-resolution imaging and identification of CNTs was introduced by incorporating the heterodyne technique into high-harmonic electrostatic force microscopy (HH-EFM) on an atomic force microscopy (AFM) platform. In the developed heterodyne HH-EFM, a more localized high-order gradient of tip-sample nonlinear interaction force is used as signal channels, resulting in an improved spatial resolution, compared to the conventional HH-EFM. Furthermore, the heterodyne HH-EFM also has the capability to visualize material carrier density and assess qualitative carrier transport performance. Our work not only presents a new approach to identifying/exploring electrical properties of low-dimensional nanomaterials but also provides a solution for optimizing resolution in long-range interaction-based functional AFM technologies.
RESUMO
Van der Waals (vdW) assembly of low-dimensional materials has proven the capability of creating structures with on-demand properties. It is predicted that the vdW encapsulation can induce a local high-pressure of a few GPa, which will strongly modify the structure and property of trapped materials. Here, we report on the structural collapse of carbon nanotubes (CNTs) induced by the vdW encapsulation. By simply covering CNTs with a hexagonal boron nitride flake, most of the CNTs (≈77%) convert from a tubular structure to a collapsed flat structure. Regardless of their original diameters, all the collapsed CNTs exhibit a uniform height of ≈0.7 nm, which is roughly the thickness of bilayer graphene. Such structural collapse is further confirmed by Raman spectroscopy, which shows a prominent broadening and blue shift in the Raman G-peak. The vdW encapsulation-induced collapse of CNTs is fully captured by molecular dynamics simulations of the local vdW pressure. Further near-field optical characterization reveals a metal-semiconductor transition in accompany with the CNT structural collapse. Our study provides not only a convenient approach to generate local high-pressure for fundamental research, but also a collapsed-CNT semiconductor for nanoelectronic applications.
RESUMO
Seawater-flow- and -evaporation-induced electricity generation holds significant promise in advancing next-generation sustainable energy technologies. This method relies on the electrokinetic effect but faces substantial limitations when operating in a highly ion-concentrated environment, for example, natural seawater. We present herein a novel solution using calcium-based metal-organic frameworks (MOFs, C12H6Ca2O19·2H2O) for seawater-evaporation-induced electricity generation. Remarkably, Ca-MOFs show an open-circuit voltage of 0.4 V and a short-circuit current of 14 µA when immersed in seawater under natural conditions. Our experiments and simulations revealed that sodium (Na) ions selectively transport within sub-nanochannels of these synthetic superhydrophilic MOFs. This selective ion transport engenders a unipolar solution flow, which drives the electricity generation behavior in seawater. This work not only showcases an effective Ca-MOF for electricity generation through seawater flow/evaporation but also contributes significantly to our understanding of water-driven energy harvesting technologies and their potential applications beyond this specific context.
RESUMO
Graphene nanoribbons (GNRs), quasi one-dimensional (1D) narrow strips of graphene, have shown promise for high-performance nanoelectronics due to their exceptionally high carrier mobility and structurally tunable bandgaps. However, producing chirality-uniform GNRs on insulating substrates remains a big challenge. Here, we report the successful growth of bilayer GNRs with predominantly armchair chirality and ultranarrow widths (<5 nm) on insulating hexagonal boron nitride (h-BN) substrates using chemical vapor deposition (CVD). The growth of GNRs is catalyzed by transition metal nanoparticles, including Fe, Co, and Ni, through a unique tip-growth mechanism. Notably, GNRs catalyzed by Ni exhibit a high purity (97.3%) of armchair chirality. Electron transport measurements indicate that the ultrathin bilayer armchair GNRs exhibit quasi-metallic behavior. This quasi-metallicity is further supported by density functional theory (DFT) calculations, which reveal a significantly reduced bandgap in bilayer armchair GNRs. The chirality-specific GNRs reported here offer promising advancements for the application of graphene in nanoelectronics.
RESUMO
Sweat sensors play a significant role in personalized healthcare by dynamically monitoring biochemical markers to detect individual physiological status. The specific response to the target biomolecules usually depends on natural oxidase, but it is susceptible to external interference. In this work, we report tryptophan- and histidine-treated copper metal-organic frameworks (Cu-MOFs). This amino-functionalized copper-organic framework shows highly selective activity for ascorbate oxidation and can serve as an efficient ascorbate oxidase-mimicking material in sensitive sweat sensors. Experiments and calculation results elucidate that the introduced tryptophan/histidine fundamentally regulates the adsorption behaviors of biomolecules, enabling ascorbate to be selectively captured from complex sweat and further efficiently electrooxidized. This work provides not only a paradigm for specifically sweat sensing but also a significant understanding of natural oxidase-inspired MOF nanoenzymes for sensing technologies and beyond.
Assuntos
Oxirredutases , Suor , Suor/química , Cobre/química , Histidina , TriptofanoRESUMO
The strain has been employed for controlled modification of electronical and mechanical properties of two-dimensional (2D) materials. However, the thermal strain-engineered behaviors of the CVD-grown MoS2have not been systematically explored. Here, we investigated the strain-induced structure and properties of CVD-grown triangular MoS2flakes by several advanced atomic force microscopy. Two different kinds of flakes with sharp-corner or vein-like nanostructures are experimentally discovered due to the size-dependent strain behaviors. The critical size of these two kinds of flakes can be roughly estimated at â¼17µm. Within the small flakes, the sharp-corner regions show specific strain-modified properties due to the suffering of large tensile strain. While in the large MoS2flakes, the complicated vein-like nanoripple structures were formed due to the interface slipping process under the larger tensile strain. Our work not only demonstrates the size-specific strain behaviors of MoS2flakes but also sheds light on the artificial design and preparation of strain-engineered nanostructures for the devices based on the 2D materials.
RESUMO
The nonlinear response of a material to an external stimulus is vital in fundamental science and technical applications. The power-law current-voltage relationship of a varistor is one such example. An excellent example of such behavior is the power-law current-voltage relationship exhibited by Bi2O3-doped ZnO varistor ceramics, which are the cornerstone of commercial varistor materials for overvoltage protection. Here, we report on a sustainable, ZnO-based varistor ceramic, without the volatile Bi2O3, that is based on Cr2O3 as the varistor former and oxides of Ca, Co, and Sb as the performance enhancers. The material has an ultrahigh α of up to 219, a low IL of less than 0.2 µA/cm2, and a high Eb of up to 925 V/mm, making it superior to state-of-the-art varistor ceramics. The results provide insights into the design of materials with specific characteristics by tailoring states at the grain boundaries. The discovery of this ZnO-Cr2O3-type varistor ceramic represents a major breakthrough in the field of varistors for overvoltage protection and could drastically affect the world market for overvoltage protection.
RESUMO
Macrophages are essential in innate immunity and are involved in a variety of biological functions. Due to high plasticity, macrophages are polarized in different phenotypes depending on different microenvironments to perform specific functions. Although many studies have focused on macrophage polarization, few have explored the polarization characteristics of macrophages at the subcellular level, even at nanoscale resolution. Here, we utilize AFM-based infrared spectroscopy (AFM-IR) to investigate the influence of an inducer on the expressed proteins of M1/M2 macrophages (induced by LPS and IL-13, respectively). The results from AFM-IR combined with principal component analysis revealed that the characteristic proteins within M1 contain about 35% antiparallel ß-sheets (due to the high expression of TNF-α), while the proteins within M2 are made up of approximately 38.8% α-helices. The corresponding nanoscale chemical mapping demonstrates a remarkably heterogeneous distribution of expressed proteins inside single macrophages. Beside the biochemical properties, the biomechanical properties of macrophages were found to be softened in response to the polarization process.
Assuntos
Interleucina-13/genética , Lipopolissacarídeos/genética , Macrófagos/metabolismo , Fator de Necrose Tumoral alfa/genética , Animais , Fenômenos Biomecânicos , Microambiente Celular , Regulação da Expressão Gênica , Interleucina-13/metabolismo , Lipopolissacarídeos/metabolismo , Ativação de Macrófagos , Macrófagos/ultraestrutura , Camundongos , Microscopia de Força Atômica , Fenótipo , Análise de Componente Principal , Conformação Proteica , Células RAW 264.7 , Espectrofotometria Infravermelho , Fator de Necrose Tumoral alfa/metabolismoRESUMO
Symmetry is highly relevant with various quantities and phenomena in physics. While the translational symmetry breaks at the edges of two-dimensional hexagonal crystalline flakes, it is usually associated with the breaking of central inversion symmetry that is yet to be observed in terms of physical properties. Here, we report an experiment-theory joint study on in-plane compressed single-crystal monolayer WS2 flakes. Although the flakes show a hexagonal appearance with a C6 symmetry, our density functional theory calculations predict that their in-plane strain, geometric structure, work-function, energy bandgap, and mechanical modulus are nonequivalent among the triangular regions with different edge terminations at the atomic scale, and the flakes exhibit self-patterns with a C3 symmetry. Such nonequivalence of physical properties and concomitant self-patterns persist even in a 50 µm-sized monolayer WS2, observed using atomic force microscopy. This indicates that the symmetry arising from the atomic geometry could preserve up to tens of microns for both geometric and properties of the flake, regardless of its mesoscopic geometry, i.e., C6 here. Such a detectable mesoscopic scale and symmetric nano- to mesoscale patterns provide promising building blocks for 2D materials and devices and also allow edge terminations of 2D flakes to be directly distinguished.
RESUMO
Interfacial engineering, such as molecule intercalation, can modify properties and optimize performance of van der Waals heterostructures and their devices. Here, we investigated the pristine and water molecule intercalated heterointerface of niobium disulphide (NbS2) on hexagonal boron nitride (h-BN) (NbS2/BN) using advanced atomic force microscopy (AFM), and observed the metal-insulator transition (MIT) of first layer (1L-) of NbS2 induced by water molecule intercalation. In pristine sample, interfacial charge transfers were confirmed by the direct detection of trapped static charges at the post-exposed h-BN surface, produced by mechanically peeling off the 1L-NbS2 from the substrate. The interfacial charge transfers facilitate the intercalation of water molecules at the heterointerface. The intercalated water layers make a MIT of 1L-NbS2, while the pristine metallic state of the following NbS2 layers remains preserved. This work is of great significance to help understand the interfacial properties of 2D metal/insulator heterostructures and can pave the way for further preparation of an ultrathin transistor.
RESUMO
Owing to the flexible nanoelectronic applications of two-dimensional (2D) materials, further exploration of their nanoscale local mechanical properties and their coupled physical characteristics becomes extremely significant. The puckering effect is a typical micro/nanoscale local frictional characteristic generally in the tip-film-substrate system, which is simultaneously expected to be coupled with a dynamic thermal interfacial response. Here, applying scanning thermal microscopy (SThM), we observed a novel mechanical-thermal coupling effect in monolayer/bilayer MoS2 and WS2 films: puckering deformation can induce the enhancement of interfacial thermal resistance (TR). By the SThM method, the puckering effect was further proved to depend on the film thickness and the scan velocity. More importantly, the crystallographic orientation-dependent anisotropy of the puckering effect in atomically thin two-dimensional crystals was demonstrated by SThM. It is inferred that the puckering deformation of the film redistributes the in-plane stress, resulting in the isotropy breaking of the in-plane stiffness. Such new findings are of great significance to help optimize the nanoscale tribological/thermal design and dynamic mechanical-thermal management of 2D-materials in nanoelectronics.
RESUMO
Understanding the process of charge generation, transfer, and diffusion between two-dimensional (2D) materials and their supporting substrates is very important for potential applications of 2D materials. Compared with the systematic studies of triboelectric charging in a bulk sample, a fundamental understanding of the triboelectrification of the 2D material/insulator system is rather limited. Here, the charge transfer and diffusion of both the SiO2 surface and MoS2/SiO2 interface through contact electrification and frictional electrification are investigated systematically in situ by scanning Kelvin probe microscopy and dual-harmonic electrostatic force microscopy. Different from the simple static charge transfer between SiO2 and the PtSi alloy atomic force microscope (AFM) tip, the charge transfer between the tip and the MoS2/SiO2 system is complicated. Triboelectric charges, generated by contact or frictional electrification with the AFM tip, are trapped at the MoS2/SiO2 interface and act as floating gates. The local charge discharge processes can be obtained by monitoring the surface potential. The charge decay time (τ) of the MoS2/SiO2 interface is one (or two) orders of magnitude larger than the decay time τ of the SiO2 surface. This work facilitates an understanding of the triboelectric and de-electrification of the interface between 2D materials and substrates. In addition to the charge transfer and diffusion, we demonstrate the nanopatterns of surface and interfacial charges, which have great potential for the application of self-assembly of charged nanostructures.