Nanosilicates facilitate periodontal regeneration potential by activating the PI3K-AKT signaling pathway in periodontal ligament cells.

The recent development of nanobiomaterials has shed some light on the field of periodontal tissue regeneration. Laponite (LAP), an artificially synthesized two-dimensional (2D) disk-shaped nanosilicate, has garnered substantial attention in regenerative biomedical applications owing to its distinctive structure, exceptional biocompatibility and bioactivity. This study endeavors to comprehensively evaluate the influence of LAP on periodontal regeneration. The effects of LAP on periodontal ligament cells (PDLCs) on osteogenesis, cementogenesis and angiogenesis were systematically assessed, and the potential mechanism was explored through RNA sequencing. The results indicated that LAP improved osteogenic and cementogenic differentiation of PDLCs, the regulatory effects of LAP on PDLCs were closely correlated with activation of PI3K-AKT signaling pathway. Moreover, LAP enhanced angiogenesis indirectly via manipulating paracrine of PDLCs. Then, LAP was implanted into rat periodontal defect to confirm its regenerative potential. Both micro-CT and histological analysis indicated that LAP could facilitate periodontal tissue regeneration in vivo. These findings provide insights into the bioactivity and underlying mechanism of LAP on PDLCs, highlighting it might be a potential therapeutic option in periodontal therapy.

Decellularized extracellular matrix coupled with polycaprolactone/laponite to construct a biomimetic barrier membrane for bone defect repair.

Barrier membranes play a prominent role in guided bone regeneration (GBR), and polycaprolactone (PCL) is an attractive biomaterial for the fabrication of barrier membranes. However, these nanofiber membranes (NFMs) require modification to improve their biological activity. PCL-NFMs incorporating with laponite (LAP) achieve biofunctional modification. Decellularized extracellular matrix (dECM) could modulate cell behaviour. The present study combined dECM with PCL/LAP-NFMs to generate a promising strategy for bone tissue regeneration. Bone marrow mesenchymal stem cells (BMSCs) were cultured on NFMs and deposited with an abundant extracellular matrix (ECM), which was subsequently decellularized to obtain dECM-modified PCL/LAP-NFMs (PCL/LAP-dECM-NFMs). The biological functions of the membranes were evaluated by reseeding MC3T3-E1 cells in vitro and transplanting them into rat calvarial defects in vivo. These results indicate that PCL/LAP-dECM-NFMs were successfully constructed. The presence of dECM slightly improved the mechanical properties of the NFMs, which exhibited a Young's modulus of 0.269 MPa, ultimate tensile strength of 2.04 MPa and elongation at break of 51.62 %. In vitro, the PCL/LAP-dECM-NFMs had favourable cytocompatibility, and the enhanced hydrophilicity was conducive to cell adhesion, proliferation, and osteoblast differentiation. PCL/LAP-dECM-NFMs exhibited an excellent bone repair capacity in vivo. Overall, dECM-modified PCL/LAP-NFMs should be promising biomimetic barrier membranes for GBR.

[Bioactive materials in periodontal regeneration].

Bioactive materials are a type of biomaterials that can generate special biological or chemical reactions on the surface or interface of materials. These reactions can impact the interaction between tissues and materials, stimulate cell activity, and guide tissue regeneration. In recent years, bioactive materials have been widely used in periodontal tissue regeneration. This review aims to consolidate the definition and characteristics of bioactive materials, as well as summarize their utilization in periodontal tissue regeneration. These findings shed new light on the application of bioactive materials in this field.

Site-specific periosteal cells with distinct osteogenic and angiogenic characteristics.

OBJECTIVES: This study aimed to investigate the site-specific characteristics of rat mandible periosteal cells (MPCs) and tibia periosteal cells (TPCs) to assess the potential application of periosteal cells (PCs) in bone tissue engineering (BTE). MATERIALS AND METHODS: MPCs and TPCs were isolated and characterized. The potential of proliferation, migration, osteogenesis and adipogenesis of MPCs and TPCs were evaluated by CCK-8, scratch assay, Transwell assay, alkaline phosphatase staining and activity, Alizarin Red S staining, RT‒qPCR, and Western blot (WB) assays, respectively. Then, these cells were cocultured with human umbilical vein endothelial cells (HUVECs) to investigate their angiogenic capacity, which was assessed by scratch assay, Transwell assay, Matrigel tube formation assay, RT‒qPCR, and WB assays. RESULTS: MPCs exhibited higher osteogenic potential, higher alkaline phosphatase activity, and more mineralized nodule formation, while TPCs showed a greater capability for proliferation, migration, and adipogenesis. MPCs showed higher expression of angiogenic factors, and the conditioned medium of MPCs accelerated the migration of HUVECs, while MPC- conditioned medium induced the formation of more tubular structure in HUVECs in vitro. These data suggest that compared to TPCs, MPCs exert more consequential proangiogenic effects on HUVECs. CONCLUSIONS: PCs possess skeletal site-specific differences in biological characteristics. MPCs exhibit more eminent osteogenic and angiogenic potentials, which highlights the potential application of MPCs for BTE. CLINICAL RELEVANCE: Autologous bone grafting as the main modality for maxillofacial bone defect repair has many limitations. Constituting an important cell type in bone repair and regeneration, MPCs show greater potential for application in BTE, which provides a promising treatment option for maxillofacial bone defect repair.

Nanosilicate-functionalized nanofibrous membrane facilitated periodontal regeneration potential by harnessing periodontal ligament cell-mediated osteogenesis and immunomodulation.

Although various new biomaterials have enriched the methods for periodontal regeneration, their efficacy is still controversial, and the regeneration of damaged support tissue in the periodontium remains challenging. Laponite (LAP) nanosilicate is a layered two-dimensional nanoscale, ultrathin nanomaterial with a unique structure and brilliant biocompatibility and bioactivity. This study aimed to investigate the effects of nanosilicate-incorporated PCL (PCL/LAP) nanofibrous membranes on periodontal ligament cells (PDLCs) in vitro and periodontal regeneration in vivo. A PCL/LAP nanofibrous membrane was fabricated by an electrospinning method. The characterization of PCL/LAP nanofibrous membrane were determined by scanning electron microscopy (SEM), energy dispersive spectrum of X-ray (EDS), inductively coupled plasma mass spectrometry (ICP-MS) and tensile test. The proliferation and osteogenic differentiation of PDLCs on the PCL/LAP nanofibrous membrane were evaluated. A PDLCs and macrophage coculture system was used to explore the immunomodulatory effects of the PCL/LAP nanofibrous membrane. PCL/LAP nanofibrous membrane was implanted into rat calvarial and periodontal defects, and the regenerative potential was evaluated by microcomputed topography (micro-CT) and histological analysis. The PCL/LAP nanofibrous membrane showed good biocompatibility and bioactivity. It enhanced the proliferation and osteogenic differentiation of PDLCs. The PCL/LAP nanofibrous membrane also stimulated anti-inflammatory and pro-remodeling N2 neutrophil formation, regulated inflammatory responses and induced M2 macrophage polarization by orchestrating the immunomodulatory effects of PDLCs. The PCL/LAP nanofibrous membrane promoted rat calvarial defect repair and periodontal regeneration in vivo. LAP nanosilicate-incorporated PCL membrane is capable of mediating osteogenesis and immunomodulation of PDLCs in vitro and accelerating periodontal regeneration in vivo. It could be a promising biomaterial for periodontal regeneration therapy.

Cementum protein 1 gene-modified adipose-derived mesenchymal stem cell sheets enhance periodontal regeneration in osteoporosis rat.

BACKGROUND AND OBJECTIVES: Osteoporosis (OP) and periodontitis are both diseases with excessive bone resorption, and the number of patients who suffer from these diseases is expected to increase. OP has been identified as a risk factor that accelerates the pathological process of periodontitis. Achieving effective and safe periodontal regeneration in OP patients is a meaningful challenge. This study aimed to assess the efficacy and biosecurity of human cementum protein 1 (hCEMP1) gene-modified cell sheets for periodontal fenestration defect regeneration in an OP rat model. MATERIALS AND METHODS: Rat adipose-derived mesenchymal stem cells (rADSCs) were isolated from Sprague-Dawley rats. After primary culture, rADSCs were subjected to cell surface analysis and multi-differentiation assay. And rADSCs were transduced with hCEMP1 by lentiviral vector, and hCEMP1 gene-modified cell sheets were generated. The expression of hCEMP1 was evaluated by reverse transcription polymerase chain reaction and immunocytochemistry staining, and transduced cell proliferation was evaluated by Cell Counting Kit-8. The hCEMP1 gene-modified cell sheet structure was detected by histological analysis and scanning electron microscopy. Osteogenic and cementogenic-associated gene expression was evaluated by real-time quantitative polymerase chain reaction. In addition, an OP rat periodontal fenestration defect model was used to evaluate the regeneration effect of hCEMP1 gene-modified rADSC sheets. The efficacy was assessed with microcomputed tomography and histology, and the biosecurity of gene-modified cell sheets was evaluated by histological analysis of the spleen, liver, kidney and lung. RESULTS: The rADSCs showed a phenotype of mesenchymal stem cells and possessed multi-differentiation capacity. The gene and protein expression of hCEMP1 through lentiviral transduction was confirmed, and there was no significant effect on rADSC proliferation. Overexpression of hCEMP1 upregulated osteogenic and cementogenic-related genes such as runt-related transcription factor 2, bone morphogenetic protein 2, secreted phosphoprotein 1 and cementum attachment protein in the gene-modified cell sheets. The fenestration lesions in OP rats treated with hCEMP1 gene-modified cell sheets exhibited complete bone bridging, cementum and periodontal ligament formation. Furthermore, histological sections of the spleen, liver, kidney and lung showed no evident pathological damage. CONCLUSION: This pilot study demonstrates that hCEMP1 gene-modified rADSC sheets have a marked ability to enhance periodontal regeneration in OP rats. Thus, this approach may represent an effective and safe strategy for periodontal disease patients with OP.

Copper modified cobalt-chromium particles for attenuating wear particle induced-inflammation and osteoclastogenesis.

The nature of aseptic prosthetic loosening mainly relates to the wear particles that induce inflammation and subsequent osteoclastogenesis. The ideal approach to impede wear particle-induced osteolysis should minimize inflammation and osteoclastogenesis. In this work, Co29Cr9W3Cu particles were used as a research model for the first time to explore the response of Co29Cr9W3Cu particles to inflammatory response and osteoclast activation in vitro and in vivo by using Co29Cr9W particles as the control group. In vitro studies showed that the Co29Cr9W3Cu particles could promote the generation of M2-phenotype macrophages and increase the expression level of anti-inflammatory factor IL-10, while inhibiting the formation of M1-phenotype macrophages and down-regulating the expression of inflammatory factors TNF-α, IL-6 and IL-1ß; More importantly, the Co29Cr9W3Cu particles reduced the expression of NF-κB and downstream osteoclast related-specific transcription marker genes, such as TRAP, NFATc1, and Cath-K; In vivo results indicated that the Co29Cr9W3Cu particles exposed to murine calvarial contributed to decreasing the amount of osteoclast and osteolysis area. These findings collectively demonstrated that Cu-bearing cobalt-chromium alloy may potentially delay the development of aseptic prosthetic loosening induced by wear particles, which is expected to provide evidence of Co29Cr9W3Cu alloy as an alternative material of joint implants with anti-wear associated osteolysis.

Nanosilicate-Functionalized Polycaprolactone Orchestrates Osteogenesis and Osteoblast-Induced Multicellular Interactions for Potential Endogenous Vascularized Bone Regeneration.

Massive oral and maxillofacial bone defect regeneration remains a major clinical challenge due to the absence of functionalized bone grafts with ideal mechanical and proregeneration properties. In the present study, Laponite (LAP), a synthetic nanosilicate, is incorporated into polycaprolactone (PCL) to develop a biomaterial for bone regeneration. It is explored whether LAP-embedded PCL would accelerate bone regeneration by orchestrating osteoblasts to directly and indirectly induce bone regeneration processes. The results confirmed the presence of LAP in PCL, and LAP is distributed in the exfoliated structure without aggregates. Incorporation of LAP in PCL slightly improved the compressive properties. LAP-embedded PCL is biocompatible and exerts pronounced enhancements in cell viability, osteogenic differentiation, and extracellular matrix formation of osteoblasts. Furthermore, osteoblasts cultured on LAP-embedded PCL facilitate angiogenesis of vessel endothelial cells and alleviate osteoclastogenesis of osteoclasts in a paracrine manner. The addition of LAP to the PCL endows favorable bone formation in vivo. Based upon these results, LAP-embedded PCL shows great potential as an ideal bone graft that exerts both space-maintaining and vascularized bone regeneration synergistic effects and can be envisioned for oral and maxillofacial bone defect regeneration.

Vascularized bone regeneration accelerated by 3D-printed nanosilicate-functionalized polycaprolactone scaffold.

Critical oral-maxillofacial bone defects, damaged by trauma and tumors, not only affect the physiological functions and mental health of patients but are also highly challenging to reconstruct. Personalized biomaterials customized by 3D printing technology have the potential to match oral-maxillofacial bone repair and regeneration requirements. Laponite (LAP) nanosilicates have been added to biomaterials to achieve biofunctional modification owing to their excellent biocompatibility and bioactivity. Herein, porous nanosilicate-functionalized polycaprolactone (PCL/LAP) was fabricated by 3D printing technology, and its bioactivities in bone regeneration were investigated in vitro and in vivo. In vitro experiments demonstrated that PCL/LAP exhibited good cytocompatibility and enhanced the viability of bone marrow mesenchymal stem cells (BMSCs). PCL/LAP functioned to stimulate osteogenic differentiation of BMSCs at the mRNA and protein levels and elevated angiogenic gene expression and cytokine secretion. Moreover, BMSCs cultured on PCL/LAP promoted the angiogenesis potential of endothelial cells by angiogenic cytokine secretion. Then, PCL/LAP scaffolds were implanted into the calvarial defect model. Toxicological safety of PCL/LAP was confirmed, and significant enhancement of vascularized bone formation was observed. Taken together, 3D-printed PCL/LAP scaffolds with brilliant osteogenesis to enhance bone regeneration could be envisaged as an outstanding bone substitute for a promising change in oral-maxillofacial bone defect reconstruction.

Tuning osteoporotic macrophage responses to favour regeneration by Cu-bearing titanium alloy in Porphyromonas gingivalis lipopolysaccharide-induced microenvironments.

Guided bone regeneration in inflammatory microenvironments of osteoporotic patients with large alveolar bone defects remains a great challenge. Macrophages are necessary for alveolar bone regeneration via their polarization and paracrine actions. Our previous studies showed that Cu-bearing Ti6Al4V alloys are capable of regulating macrophage responses. When considering the complexity of oral microenvironments, the influences of Cu-bearing Ti6Al4V alloys on osteoporotic macrophages in infectious microenvironments are worthy of further investigations. In this study, we fabricated Ti6Al4V-Cu alloy by selective laser melting technology and used Porphyromonas gingivalis lipopolysaccharide (P.g-LPS) to imitate oral pathogenic bacterial infections. Then, we evaluated the impacts of Ti6Al4V-Cu on osteoporotic macrophages in infectious microenvironments. Our results indicated that Ti6Al4V-Cu not only inhibited the P.g-LPS-induced M1 polarization and pro-inflammatory cytokine production of osteoporotic macrophages but also shifted polarization towards the pro-regenerative M2 phenotype and remarkably promoted anti-inflammatory cytokine release. In addition, Ti6Al4V-Cu effectively promoted the activity of COMMD1 to potentially repress NF-κB-mediated transcription. It is concluded that the Cu-bearing Ti6Al4V alloy results in ameliorated osteoporotic macrophage responses to create a favourable microenvironment under infectious conditions, which holds promise to develop a GBR-barrier membrane for alveolar bone regeneration of osteoporosis patients.

Osteogenic and angiogenic characterization of mandible and femur osteoblasts.

Craniofacial autologous bone grafts offer superior outcomes to long bone grafts in the reconstruction of maxillofacial bone defects, but the mechanism responsible for this superiority has not yet been illustrated clearly. Osteoblasts play vital roles in bone development and regeneration. However, presently, only a few studies have compared the osteogenic ability of osteoblasts from craniofacial and long bones, and the results are contradictory. Additionally, the angiogenic characteristics of osteoblasts from these different bones remain unknown. We obtained osteoblasts from the rat mandible (MOBs) and femur (FOBs) to investigate their proliferative capacity and osteogenic potential, and using a co-culture system with human umbilical vein endothelial cells (HUVECs), we explored their angiogenic capabilities in vitro. FOBs exhibited higher alkaline phosphatase activity and increased matrix mineralization and expressed more osteogenic related marker genes, while MOBs proliferated at the highest rate and showed elevated expression of angiogenesis-related factors. Conditioned media from MOBs enhanced the expression of angiogenesis-related factors in HUVECs. Furthermore, the conditioned media generated from MOBs showed stronger promotion of proliferation, migration, and tube-like structure formation in HUVECs, suggesting that MOBs had a stronger pro-angiogenic effect on HUVECs than FOBs. Taken together, these results indicate that osteoblasts possess skeletal site-specific differences in osteogenic and angiogenic capabilities, and this might lead to a better understanding of the molecular impact of bone cells from different bone entities on maxillofacial bone reconstructions.

Copper-modified Ti6Al4V alloy fabricated by selective laser melting with pro-angiogenic and anti-inflammatory properties for potential guided bone regeneration applications.

Custom-made biocompatible titanium alloy mesh can be designed to facilitate the regeneration of alveolar bone defects by supporting a protected space and inhibiting bacterial infections. Copper ions are often incorporated into titanium alloy due to their high bioactivity and outstanding antibacterial properties. However, the impacts of copper-bearing alloys on peri-implanted cell behaviors have rarely been systematically explored. In the present study, a copper-bearing alloy (Ti6Al4V-6Cu) was fabricated by selective laser melting (SLM) technology. The characterization of Ti6Al4V-6Cu alloy and its effects on the behaviors of gingival fibroblasts (HGFs), human umbilical vein endothelial cells (HUVECs), osteoblasts and macrophages were evaluated and compared with Ti6Al4V. The diffraction peaks of the Ti2Cu intermetallic phase were observed in the Ti6Al4V-6Cu alloy. Adding Cu enhanced the release of Ti and Al ions. The chemical state of Cu in the Ti6Al4V-6Cu alloy may exist predominantly in Cu2O or TiCuOx. Ti6Al4V-6Cu did not affect the attachment of HGFs or the osteogenic activity of osteoblasts. Furthermore, it inhibited the activation, proliferation, and pro-inflammatory cytokine secretion of macrophages and upregulated angiogenesis-related gene expression and VEGF-A secretion of HUVECs. These results demonstrate that a Ti6Al4V-6Cu alloy was successfully fabricated that did not negatively impact the cell viability of gingival fibroblasts and osteoblasts, inhibited the inflammatory response of macrophages, and increased the angiogenesis of HUVECs. Thus, Ti6Al4V-6Cu has potential applications for the fabrication of titanium alloy mesh to promote alveolar bone regeneration.

Effect of Cu on microstructure, mechanical properties, corrosion resistance and cytotoxicity of CoCrW alloy fabricated by selective laser melting.

In the study, CoCrWCu alloys with differing Cu content (2, 3, 4 wt%) were prepared by selective laser melting using mixture powders consisting of CoCrW and Cu, aiming at investigating the effect of Cu on the microstructures, mechanical properties, corrosion behavior and cytotoxicity. The SEM observations indicated that the Cu content up to 3 wt% caused the Si-rich precipitates to segregate along grain boundaries and in the grains, and EBSD analysis suggested that the Cu addition decreased the recrystallization degree and increased the grain diameter and fraction of big grains. The tensile tests found that the increasing Cu content led to a decrease of mechanical properties compared with Cu-free CoCrW alloy. The electrochemical tests revealed that the addition of Cu shifted the corrosion potential toward nobler positive, but increased the corrosion current density. Also, a more protective passive film was formed when 2 wt% Cu content was added, but the higher Cu content up to 3 wt% was detrimental to the corrosion resistance. It was noted that there was no cytotoxicity for Cu-bearing CoCrW alloys to MG-63 cell and the cells could spread well on the surfaces of studied alloys. Meanwhile, the Cu-bearing CoCrW alloy exhibited an excellent antibacterial performance against E.coli when Cu content was up to 3 wt%. It is suggested that the feasible fabrication of Cu-bearing CoCrW alloy by SLM using mixed CoCrW and Cu powders is a promising candidate for use in antibacterial oral repair products. This current study also can aid in the further design of antibacterial Cu-containing CoCrW alloying powders.

Copper-Modified Ti6Al4 V Suppresses Inflammatory Response and Osteoclastogenesis while Enhancing Extracellular Matrix Formation for Osteoporotic Bone Regeneration.

Copper has been reported to promote bone regeneration by increasing osteogenesis and decreasing inflammation and osteoclastogenesis. However, information on the effects of copper on osteoporotic cells involved in bone regeneration is scarce in the literature. In the current study, Ti6Al4 V-6 wt %Cu (Ti6Al4 V-Cu) was fabricated by selective laser melting (SLM) technology, and the effects of copper on the behaviors of osteoporotic and nonosteoporotic macrophages, osteoclasts, and osteoblasts were evaluated by comparison with Ti6Al4 V. Our results showed that Ti6Al4 V-Cu inhibited the activation, viability, and pro-inflammatory cytokine secretion of osteoporotic macrophages and decreased osteoclast formation and down-regulated osteoclast differentiation-related genes and proteins of osteoporotic osteoclasts. Furthermore, the bone extracellular matrix formation of osteoporotic osteoblasts was up-regulated by Ti6Al4 V-Cu. In conclusion, SLM-fabricated Ti6Al4 V-Cu exhibited excellent anti-inflammation and antiosteoclast capability, optimized extracellular matrix formation, and holds great potential for bone regeneration in osteoporotic patients.

Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V-xCu alloys.

In this study, a series of Cu-bearing Ti6Al4V-xCu (x=0, 2, 4, 6wt%) alloys (shorten by Ti6Al4V, 2C, 4C, and 6C, respectively.) with antibacterial function were successfully fabricated by selective laser melting (SLM) technology with mixed spherical powders of Cu and Ti6Al4V for the first time. In order to systematically investigate the effects of Cu content on the microstructure, phase constitution, corrosion resistance, antibacterial properties and cytotoxicity of SLMed Ti6Al4V-xCu alloys, experiments including XRD, SEM-EDS, electrochemical measurements, antibacterial tests and cytotoxicity tests were conducted with comparison to SLMed Ti6Al4V alloy (Ti6Al4V). Microstructural observations revealed that Cu had completely fused into the Ti6Al4V alloy, and presented in the form of Ti2Cu phase at ambient temperature. With Cu content increase, the density of the alloy gradually decreased, and micropores were obviously found in the alloy. Electrochemical measurements showed that corrosion resistance of Cu-bearing alloys were stronger than Cu-free alloy. Antibacterial tests demonstrated that 4C and 6C alloys presented strong and stable antibacterial property against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) compared to the Ti6Al4V and 2C alloy. In addition, similar to the Ti6Al4V alloy, the Cu-bearing alloys also exerted good cytocompatibility to the Bone Marrow Stromal Cells (BMSCs) from Sprague Dawley (SD) rats. Based on those results, the preliminary study verified that it was feasible to fabricated antibacterial Ti6Al4V-xCu alloys direct by SLM processing mixed commercial Ti6Al4V and Cu powder.