Gradual Optimization of Molecular Aggregation and Stacking Enables Over 19% Efficiency in Binary Organic Solar Cells.

Volatile solid additive is an effective and simple strategy for morphology control in organic solar cells (OSCs). The development of environmentally friendly new additives which can also be easily removed without high-temperature thermal annealing treatment is currently a trend, and the working mechanism needs to be further studied. Herein, a highly volatile and non-halogenated solid additive 1-benzothiophene (BBT) is reported to regulate molecular aggregation and stacking of active layer components. According to the film-forming kinetics process, a momentary intermediate phase is formed during spin-coating, which slows down the film-forming process and leads to more ordered molecular stacking in the solid film after introducing solid additive BBT. Subsequently, after solvent vapor annealing (SVA) further treatment, the resultant blend films exhibit a tighter and more ordered molecular stacking. Consequently, the synergistic effect of solid additive BBT and SVA treatment can effectively control morphology of active layer and improve carrier transport characteristics, thereby enhancing the performance of OSCs. Finally, in D18-Cl:N3 system, an impressive power conversion efficiency of 19.53% is achieved. The work demonstrates that the combination of highly volatile solid additives and SVA treatment is an effective morphology control strategy, guiding the development of efficient OSCs.

Enhanced charge carrier transport and defects mitigation of passivation layer for efficient perovskite solar cells.

Surface passivation has been developed as an effective strategy to reduce trap-state density and suppress non-radiation recombination process in perovskite solar cells. However, passivation agents usually own poor conductivity and hold negative impact on the charge carrier transport in device. Here, we report a binary and synergistical post-treatment method by blending 4-tert-butyl-benzylammonium iodide with phenylpropylammonium iodide and spin-coating on perovskite surface to form passivation layer. The binary and synergistical post-treated films show enhanced crystallinity and improved molecular packing as well as better energy band alignment, benefiting for the hole extraction and transfer. Moreover, the surface defects are further passivated compared with unary passivation. Based on the strategy, a record-certified quasi-steady power conversion efficiency of 26.0% perovskite solar cells is achieved. The devices could maintain 81% of initial efficiency after 450 h maximum power point tracking.

End-extended Conjugation Strategy to Reduce the Efficiency-Stability-Mechanical Robustness Gap in Binary All-Polymer Solar Cells.

Concurrently achieving high efficiency, mechanical robustness and thermal stability is critical for the commercialization of all-polymer solar cells (APSCs). However, APSCs usually demonstrate complicated morphology, primarily attributed to the polymer chain entanglement which has a detrimental effect on their fill factors (FF) and morphology stability. To address these concerns, an end-group extended polymer acceptor, PY-NFT, was synthesized and studied. The morphology analysis showed a tightly ordered molecular packing mode and a favorable phase separation was formed. The PM6:PY-NFT-based device achieved an exceptional PCE of 19.12% (certified as 18.45%), outperforming the control PM6:PY-FT devices (17.14%). This significant improvement highlights the record-high PCE for binary APSCs. The thermal aging study revealed that the PM6:PY-NFT blend exhibited excellent morphological stability, thereby achieving superior device stability, retaining 90% of initial efficiency after enduring thermal stress (65 °C) for 1500 hours. More importantly, the PM6:PY-NFT blend film exhibited outstanding mechanical ductility with a crack onset strain of 24.1%. Overall, rational chemical structure innovation, especially the conjugation extension strategy to trigger appropriate phase separation and stable morphology, is the key to achieving high efficiency, improved thermal stability and robust mechanical stability of APSCs.

Inhibiting Ion Migration and Stabilizing Crystal-Phase in Halide Perovskite via Directly Incorporated Fluoride Anion.

Fluoride anion (F-) with extremely high electronegativity has been under intensive investigation in perovskite solar cells due to its remarkable defect suppression and greatly improvement of device performance. Nevertheless, these researches only focus on surface, grain boundaries or interface modification, the directly insertion of F- into crystal lattice of regular lead halide perovskite films is still unrevealed. Herein, F- was successfully incorporated into perovskite lattice by overcoming the insolubility of PbF2 via the introduced pyridinium halide as a novel volatile solubilizing ligand. The strong electronegativity of F- can strongly increase the binding energy of all the ions in CsPbI2Br and inhibit their defect formations. A trace amount of F- incorporation not only enhanced the optoelectronic properties but also effectively mitigated the ion migration and phase separation simultaneously. The photovoltaic performance and operational stability of perovskite solar cells were significantly improved with a champion efficiency of 17.78% (38.01%) under AM 1.5G (1000 lux indoor light). Moreover, F- can also be directly inserted into hybrid perovskite lattice and greatly stabilized crystal-phase, enabling efficient fully MA-free FAPbI3 devices with 25.10% efficiency. Our strategy sheds light on F-containing perovskites and provides a promising way to tackle ion migration and stabilize crystal-phase in halide perovskites.

High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics.

α-FA1-xCsxPbI3 is a promising absorber material for efficient and stable perovskite solar cells (PSCs)1,2. However, the most efficient α-FA1-xCsxPbI3 PSCs require the inclusion of methylammonium chloride (MACl) additive3,4, which generates volatile organic residues (i.e., MA) that limit device stability at elevated temperatures5. To date, the highest certified power-conversion efficiency (PCE) of α-FA1-xCsxPbI3 PSCs without MACl was only ~24% (ref.6,7), and has yet to exhibit any stability advantages. Here, we identify interfacial contact loss caused by the Cs+ accumulation for the conventional α-FA1-xCsxPbI3 PSCs, which deteriorates the device performance and stability. Through in-situ GIWAXS analysis and DFT calculations, we demonstrate an intermediate phase-assisted crystallization pathway enabled by acetate surface coordination to fabricate high-quality α-FA1-xCsxPbI3 film, without using MA-additive. We herein report a certified stabilized power output (SPO) efficiency of 25.94% and a reverse-scanning PCE of 26.64% for α-FA1-xCsxPbI3 PSCs, exhibiting negligible contact losses and enhanced operational stability. The devices retain >95% of their initial PCEs after over 2,000 hours operating at maximum power point under 1 sun, 85 °C, and 60% relative humidity (ISOS-L-3).

Stabilization of highly efficient perovskite solar cells with a tailored supramolecular interface.

The presence of defects at the interface between the perovskite film and the carrier transport layer poses significant challenges to the performance and stability of perovskite solar cells (PSCs). Addressing this issue, we introduce a dual host-guest (DHG) complexation strategy to modulate both the bulk and interfacial properties of FAPbI3-rich PSCs. Through NMR spectroscopy, a synergistic effect of the dual treatment is observed. Additionally, electro-optical characterizations demonstrate that the DHG strategy not only passivates defects but also enhances carrier extraction and transport. Remarkably, employing the DHG strategy yields PSCs with power conversion efficiencies (PCE) of 25.89% (certified at 25.53%). Furthermore, these DHG-modified PSCs exhibit enhanced operational stability, retaining over 96.6% of their initial PCE of 25.55% after 1050 hours of continuous operation under one-sun illumination, which was the highest initial value in the recently reported articles. This work establishes a promising pathway for stabilizing high-efficiency perovskite photovoltaics through supramolecular engineering, marking a significant advancement in the field.

Photovoltaic nanocells for high-performance large-scale-integrated organic phototransistors.

A high-performance large-scale-integrated organic phototransistor needs a semiconductor layer that maintains its photoelectric conversion ability well during high-resolution pixelization. However, lacking a precise design for the nanoscale structure, a trade-off between photoelectric performance and device miniaturization greatly limits the success in commercial application. Here we demonstrate a photovoltaic-nanocell enhancement strategy, which overcomes the trade-off and enables high-performance organic phototransistors at a level beyond large-scale integration. Embedding a core-shell photovoltaic nanocell based on perovskite quantum dots in a photocrosslinkable organic semiconductor, ultralarge-scale-integrated (>221 units) imaging chips are manufactured using photolithography. 27 million pixels are interconnected and the pixel density is 3.1 × 106 units cm-2, at least two orders of magnitude higher than in existing organic imaging chips and equivalent to the latest commercial full-frame complementary metal-oxide-semiconductor camera chips. The embedded photovoltaic nanocells induce an in situ photogating modulation and enable photoresponsivity and detectivity of 6.8 × 106 A W-1 and 1.1 × 1013 Jones (at 1 Hz), respectively, achieving the highest values of organic imaging chips at large-scale or higher integration. In addition, a very-large-scale-integrated (>216 units) stretchable biomimetic retina based on photovoltaic nanocells is manufactured for neuromorphic imaging recognition with not only resolution but also photoresponsivity and power consumption approaching those of the biological counterpart.

Synchrotron Radiation-Based In Situ GIWAXS for Metal Halide Perovskite Solution Spin-Coating Fabrication.

Solution-processable perovskite-based devices are potentially very interesting because of their relatively cheap fabrication cost but outstanding optoelectronic performance. However, the solution spin-coating process involves complicated processes, including perovskite solution droplets, nucleation of perovskite, and formation of intermediate perovskite films, resulting in complicated crystallization pathways for perovskite films under annealing. Understanding and therefore controlling the fabrication process of perovskites is difficult. Recently, synchrotron radiation-based in situ grazing-incidence wide-angle X-ray scattering (GIWAXS) techniques, which possess the advantages of high collimation, high resolution, and high brightness, have enabled to bridge complicated perovskite structure information with device performance by revealing the real-time crystallization pathways of perovskites during the spin-coating process. Herein, the developments of synchrotron radiation-based in situ GIWAXS are discussed in the study of the crystallization process of perovskites, especially revealing the important crystallization mechanisms of state-of-the-art perovskite optoelectronic devices with high performance. At the end, several potential applications and challenges associated with in situ GIWAXS techniques for perovskite-based devices are highlighted.

Fabrication of red-emitting perovskite LEDs by stabilizing their octahedral structure.

Light-emitting diodes (LEDs) based on metal halide perovskites (PeLEDs) with high colour quality and facile solution processing are promising candidates for full-colour and high-definition displays1-4. Despite the great success achieved in green PeLEDs with lead bromide perovskites5, it is still challenging to realize pure-red (620-650 nm) LEDs using iodine-based counterparts, as they are constrained by the low intrinsic bandgap6. Here we report efficient and colour-stable PeLEDs across the entire pure-red region, with a peak external quantum efficiency reaching 28.7% at 638 nm, enabled by incorporating a double-end anchored ligand molecule into pure-iodine perovskites. We demonstrate that a key function of the organic intercalating cation is to stabilize the lead iodine octahedron through coordination with exposed lead ions and enhanced hydrogen bonding with iodine. The molecule synergistically facilitates spectral modulation, promotes charge transfer between perovskite quantum wells and reduces iodine migration under electrical bias. We realize continuously tunable emission wavelengths for iodine-based perovskite films with suppressed energy loss due to the decrease in bond energy of lead iodine in ionic perovskites as the bandgap increases. Importantly, the resultant devices show outstanding spectral stability and a half-lifetime of more than 7,600 min at an initial luminance of 100 cd m-2.

Revealing the vertical structure of in-situ fabricated perovskite nanocrystals films toward efficient pure red light-emitting diodes.

The development of efficient perovskite light-emitting diodes (PeLEDs) relies strongly on the fabrication of perovskite films with rationally designed structures (grain size, composition, surface, etc.). Therefore, an understanding of structure-performance relationships is of vital importance for developing high-performance perovskite devices, particularly for devices with in-situ fabricated perovskite nanocrystal films. In this study, we reveal the vertical structure of an in-situ fabricated quasi-two-dimensional perovskite film. By combining time-of-flight secondary ion mass spectrometry, energy dispersive spectroscopy, grazing incidence wide-angle X-ray scattering (GIWAXS), and low-temperature photoluminescence spectra, we illustrate that the resulting in-situ fabricated DPPA2Csn-1Pbn(Br0.3I0.7)3n+1 (DPPA+: 3,3-diphenylpropylammonium) film has a gradient structure with a very thin layer of ligands on the surface, predominantly small-n domains at the top, and predominantly large-n domains at the bottom owing to the solubility difference of the precursors. In addition, GIWAXS measurements show that the domain of n = 2 on the top layer has an ordered in-plane alignment. Based on the understanding of the film structure, we developed an in-situ fabrication process with ligand exchange to achieve efficient pure red PeLEDs at 638 nm with an average external quantum efficiency (EQE) of 7.4%. The optimized device had a maximum luminance of 623 cd/m2 with a peak EQE of 9.7%.

Acceleration of radiative recombination for efficient perovskite LEDs.

The increasing demands for more efficient and brighter thin-film light-emitting diodes (LEDs) in flat-panel display and solid-state lighting applications have promoted research into three-dimensional (3D) perovskites. These materials exhibit high charge mobilities and low quantum efficiency droop1-6, making them promising candidates for achieving efficient LEDs with enhanced brightness. To improve the efficiency of LEDs, it is crucial to minimize nonradiative recombination while promoting radiative recombination. Various passivation strategies have been used to reduce defect densities in 3D perovskite films, approaching levels close to those of single crystals3. However, the slow radiative (bimolecular) recombination has limited the photoluminescence quantum efficiencies (PLQEs) of 3D perovskites to less than 80% (refs. 1,3), resulting in external quantum efficiencies (EQEs) of LED devices of less than 25%. Here we present a dual-additive crystallization method that enables the formation of highly efficient 3D perovskites, achieving an exceptional PLQE of 96%. This approach promotes the formation of tetragonal FAPbI3 perovskite, known for its high exciton binding energy, which effectively accelerates the radiative recombination. As a result, we achieve perovskite LEDs with a record peak EQE of 32.0%, with the efficiency remaining greater than 30.0% even at a high current density of 100 mA cm-2. These findings provide valuable insights for advancing the development of high-efficiency and high-brightness perovskite LEDs.

Interface Dipole Management of D-A-Type Molecules for Efficient Perovskite Solar Cells.

Interfacial engineering of perovskite films has been the main strategies in improving the efficiency and stability of perovskite solar cells (PSCs). In this study, three new donor-acceptor (D-A)-type interfacial dipole (DAID) molecules with hole-transporting and different anchoring units are designed and employed in PSCs. The formation of interface dipoles by the DAID molecules on the perovskite film can efficiently modulate the energy level alignment, improve charge extraction, and reduce non-radiative recombination. Among the three DAID molecules, TPA-BAM with amide group exhibits the best chemical and optoelectrical properties, achieving a champion PCE of 25.29 % with the enhanced open-circuit voltage of 1.174 V and fill factor of 84.34 %, due to the reduced defect density and improved interfacial hole extraction. Meanwhile, the operational stability of the unencapsulated device has been significantly improved. Our study provides a prospect for rationalized screening of interfacial dipole materials for efficient and stable PSCs.

Dualistic insulator states in 1T-TaS2 crystals.

While the monolayer sheet is well-established as a Mott-insulator with a finite energy gap, the insulating nature of bulk 1T-TaS2 crystals remains ambiguous due to their varying dimensionalities and alterable interlayer coupling. In this study, we present a unique approach to unlock the intertwined two-dimensional Mott-insulator and three-dimensional band-insulator states in bulk 1T-TaS2 crystals by structuring a laddering stack along the out-of-plane direction. Through modulating the interlayer coupling, the insulating nature can be switched between band-insulator and Mott-insulator mechanisms. Our findings demonstrate the duality of insulating nature in 1T-TaS2 crystals. By manipulating the translational degree of freedom in layered crystals, our discovery presents a promising strategy for exploring fascinating physics, independent of their dimensionality, thereby offering a "three-dimensional" control for the era of slidetronics.

Efficient Homojunction Tin Perovskite Solar Cells Enabled by Gradient Germanium Doping.

P-type self-doping is known to hamper tin-based perovskites for developing high-performance solar cells by increasing the background current density and carrier recombination processes. In this work, we propose a gradient homojunction structure with germanium doping that generates an internal electric field across the perovskite film to deplete the charge carriers. This structure reduces the dark current density of perovskite by over 2 orders of magnitude and trap density by an order of magnitude. The resultant tin-based perovskite solar cells exhibit a higher power conversion efficiency of 13.3% and excellent stability, maintaining 95% and 85% of their initial efficiencies after 250 min of continuous illumination and 3800 h of storage, respectively. We reveal the homojunction formation mechanism using density functional theory calculations and molecular level characterizations. Our work provides a reliable strategy for controlling the spatial energy levels in tin perovskite films and offers insights into designing intriguing lead-free perovskite optoelectronics.

A Catalyst-Like System Enables Efficient Perovskite Solar Cells.

High-quality perovskite films are essential for achieving high performance of optoelectronic devices; However, solution-processed perovskite films are known to suffer from compositional and structural inhomogeneity due to lack of systematic control over the kinetics during the formation. Here, the microscopic homogeneity of perovskite films is successfully enhanced by modulating the conversion reaction kinetics using a catalyst-like system generated by a foaming agent. The chemical and structural evolution during this catalytic conversion is revealed by a multimodal synchrotron toolkit with spatial resolutions spanning many length scales. Combining these insights with computational investigations, a cyclic conversion pathway model is developed that yields exceptional perovskite homogeneity due to enhanced conversion, having a power conversion efficiency of 24.51% for photovoltaic devices. This work establishes a systematic link between processing of precursor and homogeneity of the perovskite films.

Self-Polymerized Spiro-Type Interfacial Molecule toward Efficient and Stable Perovskite Solar Cells.

In the pursuit of highly efficient perovskite solar cells, spiro-OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self-polymerized spiro-type interfacial molecule, termed v-spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro-OMeTAD. Importantly, the vinyl groups in v-spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly-v-spiro-based device achieves an outstanding efficiency of 24.54 %, with an enhanced open-circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long-term stability in PSCs through innovative interfacial design.

Polydentate Ligand Reinforced Chelating to Stabilize Buried Interface toward High-Performance Perovskite Solar Cells.

The instability of the buried interface poses a serious challenge for commercializing perovskite photovoltaic technology. Herein, we report a polydentate ligand reinforced chelating strategy to strengthen the stability of buried interface by managing interfacial defects and stress. The bis(2,2,2-trifluoroethyl) (methoxycarbonylmethyl)phosphonate (BTP) is employed to manipulate the buried interface. The C=O, P=O and two -CF3 functional groups in BTP synergistically passivate the defects from the surface of SnO2 and the bottom surface of the perovskite layer. Moreover, The BTP modification contributes to mitigated interfacial residual tensile stress, promoted perovskite crystallization, and reduced interfacial energy barrier. The multidentate ligand modulation strategy is appropriate for different perovskite compositions. Due to much reduced nonradiative recombination and heightened interface contact, the device with BTP yields a promising power conversion efficiency (PCE) of 24.63 %, which is one of the highest efficiencies ever reported for devices fabricated in the air environment. The unencapsulated BTP-modified devices degrade to 98.6 % and 84.2 % of their initial PCE values after over 3000 h of aging in the ambient environment and after 1728 h of thermal stress, respectively. This work provides insights into strengthening the stability of the buried interface by engineering multidentate chelating ligand molecules.