Enabling Sustainable Ammonia Synthesis: From Nitrogen Activation Strategies to Emerging Materials.

Ammonia (NH3) is one of the most important precursors of various chemicals and fertilizers. Given that ammonia synthesis via the traditional Haber-Bosch process requires high temperatures and pressures, it is critical to explore effective strategies and catalysts for ammonia synthesis under mild reaction conditions. Although electrocatalysis and photocatalysis can convert N2 to NH3 under mild conditions, their efficiencies and production scales are still far from the requirements for industrialization. Thermal catalysis has been proven to be the most direct and effective approach for ammonia synthesis. Over the past few decades, significant efforts have been made to develop novel catalysts capable of nitrogen fixation and ammonia generation via thermal catalytic processes. In parallel with catalyst exploration, new strategies such as self-electron donation, hydride fixation, hydridic hydrogen reduction, and anionic vacancy promotion have also been explored to moderate the operating conditions and improve the catalytic efficiency of ammonia synthesis. In this review, the emergence of new materials and strategies for promoting N2 activation and NH3 formation during thermal catalysis is briefly summarized. Moreover, challenges and prospects are proposed for the future development of thermal catalytic ammonia synthesis.

Discovery of Self-Assembled 2D Ru/Si Superlattices Boosting Hydrogen Evolution.

2D heterostructuring is a versatile methodology for designing nanoarchitecture catalytic systems that allow for reconstruction and modulation of interfaces and electronic structures. However, catalysts with such structures are extremely scarce due to limited synthetic strategies. Here, a highly ordered 2D Ru/Si/Ru/Si… nano-heterostructures (RSHS) is reported by acid etching of the LaRuSi electride. RSHS shows a superior electrocatalytic activity for hydrogen evolution with an overpotential of 14 mV at 10 mA cm-2 in alkaline media. Both experimental analyses and first-principles calculations demonstrate that the electronic states of Ru can be tuned by strong interactions of the interfacial Ru-Si, leading to an optimized hydrogen adsorption energy. Moreover, due to the synergistic effect of Ru and Si, the energy barrier of water dissociation is significantly reduced. The well-organized superlattice structure will provide a paradigm for construction of efficient catalysts with tunable electronic states and dual active sites.

Dipole Coupling Accelerated H2 O Dissociation by Magnesium-Based Intermetallic Catalysts.

The water (H2 O) dissociation is critical for various H2 O-associated reactions, including water gas shift, hydrogen evolution reaction and hydrolysis corrosion. While the d-band center concept offers a catalyst design guideline for H2 O activation, it cannot be applied to intermetallic or main group elements-based systems because Coulomb interaction was not considered. Herein, using hydrolysis corrosion of Mg as an example, we illustrate the critical role of the dipole of the intermetallic catalysts for H2 O dissociation. The H2 O dissociation kinetics can be enhanced using Mgx Mey (Me=Co, Ni, Cu, Si and Al) as catalysts, and the hydrogen generation rate of Mg2 Ni-loaded Mg reached 80 times as high as Ni-loaded Mg. The adsorbed H2 O molecules strongly couple with the Mg-Me dipole of Mgx Mey , lowering the H2 O dissociation barrier. The dipole-based H2 O dissociation mechanism is applicable to non-transition metal-based systems, such as Mg2 Si and Mg17 Al12 , offering a flexible catalyst design strategy for controllable H2 O dissociation.

Multiple reaction pathway on alkaline earth imide supported catalysts for efficient ammonia synthesis.

The tunability of reaction pathways is required for exploring efficient and low cost catalysts for ammonia synthesis. There is an obstacle by the limitations arising from scaling relation for this purpose. Here, we demonstrate that the alkali earth imides (AeNH) combined with transition metal (TM = Fe, Co and Ni) catalysts can overcome this difficulty by utilizing functionalities arising from concerted role of active defects on the support surface and loaded transition metals. These catalysts enable ammonia production through multiple reaction pathways. The reaction rate of Co/SrNH is as high as 1686.7 mmol·gCo-1·h-1 and the TOFs reaches above 500 h-1 at 400 °C and 0.9 MPa, outperforming other reported Co-based catalysts as well as the benchmark Cs-Ru/MgO catalyst and industrial wüstite-based Fe catalyst under the same reaction conditions. Experimental and theoretical results show that the synergistic effect of nitrogen affinity of 3d TMs and in-situ formed NH2- vacancy of alkali earth imides regulate the reaction pathways of the ammonia production, resulting in distinct catalytic performance different from 3d TMs. It was thus demonstrated that the appropriate combination of metal and support is essential for controlling the reaction pathway and realizing highly active and low cost catalysts for ammonia synthesis.

Topological insulator as an efficient catalyst for oxidative carbonylation of amines.

Topological materials have received much attention because of their robust topological surface states, which can be potentially applied in electronics and catalysis. Here, we show that the topological insulator bismuth selenide functions as an efficient catalyst for the oxidative carbonylation of amines with carbon monoxide and dioxygen to synthesize urea derivatives. For example, the carbonylation of butylamine can be completed over bismuth selenide nanoparticle catalyst in 4 hours at 20°C with a yield of 99%, whereas most noble metal-based catalysts do not function at such a low temperature. Density functional theory calculations further reveal that the topological surface states facilitate the activation of dioxygen through a triplet-to-singlet spin-conversion reaction, in which active oxygen species are formed with a barrier of 0.4 electron volts for the subsequent reactions with amine and carbon monoxide.

A simplified and facile preparation method for the [Ca24Al28O64]4+(e-)4 electride.

Wide application of novel materials often requires low-cost preparation methods. In this study, we present a simplified and facile preparation method for the [Ca24Al28O64]4+(e-)4 electride material (C12A7:e-). Successful preparation of the C12A7:e- electride was confirmed by XRD patterns and magnetic behavior analysis. The concentration of electrons in the prepared C12A7:e- powder was calculated to be approximately 2.23 × 1021 cm-3, as evaluated by iodometry and TPD. DFT calculations provided insight into the unique electronic structure of C12A7:e-. Additionally, the substitution of the Ca reductant with CaH2 led to a reduction in the solid-state reaction temperature from 1100 to 950 °C, which can be attributed to thermodynamic effects such as a reduction in ΔG°.

Approach to Chemically Durable Nickel and Cobalt Lanthanum-Nitride-Based Catalysts for Ammonia Synthesis.

Metal nitride complexes have recently been proposed as an efficient noble-metal-free catalyst for ammonia synthesis utilizing a dual active site concept. However, their high sensitivity to air and moisture has restricted potential applications. We report that their chemical sensitivity can be improved by introducing Al into the LaN lattice, thereby forming La-Al metallic bonds (La-Al-N). The catalytic activity and mechanism of the resulting TM/La-Al-N (TM=Ni, Co) are comparable to the previously reported TM/LaN catalyst. Notably, the catalytic activity did not degrade after exposure to air and moisture. Kinetic analysis and isotopic experiment showed that La-Al-N is responsible for N2 absorption and activation despite substantial Al being introduced into its lattice because the local coordination of the lattice N remained largely unchanged. These findings show the effectiveness of metallic bond formation, which can support the chemical stability of rare-earth nitrides with retention of catalytic functionality.

Intermetallic Copper-Based Electride Catalyst with High Activity for C-H Oxidation and Cycloaddition of CO2 into Epoxides.

Inorganic electrides have been proved to be efficient hosts for incorporating transition metals, which can effectively act as active sites giving an outstanding catalytic performance. Here, it is demonstrated that a reusable and recyclable (for more than 7 times) copper-based intermetallic electride catalyst (LaCu0.67 Si1.33 ), in which the Cu sites activated by anionic electrons with low-work function are uniformly dispersed in the lattice framework, shows vast potential for the selective C-H oxidation of industrially important hydrocarbons and cycloaddition of CO2 with epoxide. This leads to the production of value-added cyclic carbonates under mild reaction conditions. Importantly, the LaCu0.67 Si1.33 catalyst enables much higher turnover frequencies for the C-H oxidation (up to 25 276 h-1 ) and cycloaddition of CO2 into epoxide (up to 800 000 h-1 ), thus exceeding most nonnoble as well as noble metal catalysts. Density functional theory investigations have revealed that the LaCu0.67 Si1.33 catalyst is involved in the conversion of N-hydroxyphthalimide (NHPI) into the phthalimido-N-oxyl (PINO), which then triggers selective abstraction of an H atom from ethylbenzene for the generation of a radical susceptible to further oxygenation in the presence of O2 .

First-Principles Study of Three-Dimensional Electrides Containing One-Dimensional [Ba3N]3+ Chains.

Electrides, a unique type of compound where electrons act as anions, have a high electron mobility and a low work function, which makes them promising for applications in electronic devices and high-performance catalysts. The discovery of novel electrides and the expansion of the electride family have great significance for their promising applications. Herein, we reported four three-dimensional (3D) electrides by coupling crystal structure database searches and first-principles electronic structure analysis. Subnitrides (Ba3N, LiBa3N, NaBa3N, and Na5Ba3N) containing one-dimensional (1D) [Ba3N]3+ chains are identified as 3D electrides for the first time. The anionic electrons are confined in the 3D interstitial space of Ba3N, LiBa3N, NaBa3N, and Na5Ba3N. Interestingly, with the increase of Na content, the excess electrons of Na5Ba3N play two roles of metallic bonding and anionic electrons. Therefore, the subnitrides containing 1D [Ba3N]3+ chains can be regarded as a new family of 3D electrides, where anionic electrons reside in the 3D interstitial spaces and provide a conduction path. These materials not only are experimentally synthesizable 3D electrides but also are promising to be exfoliated into advanced 1D nanowire materials. Furthermore, our work suggests a discovery strategy of novel electrides based on one parent framework like [Ba3N]3+ chains, which would accelerate the mining of electrides from the crystal structure database.

Dissociative and Associative Concerted Mechanism for Ammonia Synthesis over Co-Based Catalyst.

The current catalytic reaction mechanism for ammonia synthesis relies on either dissociative or associative routes, in which adsorbed N2 dissociates directly or is hydrogenated step-by-step until it is broken upon the release of NH3 through associative adsorption. Here, we propose a concerted mechanism of associative and dissociative routes for ammonia synthesis over a cobalt-loaded nitride catalyst. Isotope exchange experiments reveal that the adsorbed N2 can be activated on both Co metal and the nitride support, which leads to superior low-temperature catalytic performance. The cooperation of the surface low work function (2.6 eV) feature and the formation of surface nitrogen vacancies on the CeN support gives rise to a dual pathway for N2 activation with much reduced activation energy (45 kJ·mol-1) over that of Co-based catalysts reported so far, which results in efficient ammonia synthesis under mild conditions.

Conversion of bimetallic MOF to Ru-doped Cu electrocatalysts for efficient hydrogen evolution in alkaline media.

The rational design and construction of inexpensive and highly active electrocatalysts for hydrogen evolution reaction (HER) is of great importance for water splitting. Herein, we develop a facile approach for preparation of porous carbon-confined Ru-doped Cu nanoparticles (denoted as Ru-Cu@C) by direct pyrolysis of the Ru-exchanged Cu-BTC metal-organic framework. When served as the electrocatalyst for HER, strikingly, the obtained Ru-Cu@C catalyst exhibits an ultralow overpotential (only 20 mV at 10 mA cm-2) with a small Tafel slope of 37 mV dec-1 in alkaline electrolyte. The excellent performance is comparable or even superior to that of commercial Pt/C catalyst. Density functional theory (DFT) calculations confirm that introducing Ru atoms into Cu nanocrystals can significantly alter the desorption of H2 to achieve a close-to-zero hydrogen adsorption energy and thereby boost the HER process. This strategy gives a fresh impetus to explore low-cost and high-performance catalysts for HER in alkaline media.

Contribution of Nitrogen Vacancies to Ammonia Synthesis over Metal Nitride Catalysts.

Ammonia is one of the most important feedstocks for the production of fertilizer and as a potential energy carrier. Nitride compounds such as LaN have recently attracted considerable attention due to their nitrogen vacancy sites that can activate N2 for ammonia synthesis. Here, we propose a general rule for the design of nitride-based catalysts for ammonia synthesis, in which the nitrogen vacancy formation energy (ENV) dominates the catalytic performance. The relatively low ENV (ca. 1.3 eV) of CeN means it can serve as an efficient and stable catalyst upon Ni loading. The catalytic activity of Ni/CeN reached 6.5 mmol·g-1·h-1 with an effluent NH3 concentration (ENH3) of 0.45 vol %, reaching the thermodynamic equilibrium (ENH3 = 0.45 vol %) at 400 °C and 0.1 MPa, thereby circumventing the bottleneck for N2 activation on Ni metal with an extremely weak nitrogen binding energy. The activity far exceeds those for other Co- and Ni-based catalysts, and is even comparable to those for Ru-based catalysts. It was determined that CeN itself can produce ammonia without Ni-loading at almost the same activation energy. Kinetic analysis and isotope experiments combined with density functional theory (DFT) calculations indicate that the nitrogen vacancies in CeN can activate both N2 and H2 during the reaction, which accounts for the much higher catalytic performance than other reported nonloaded catalysts for ammonia synthesis.

Vacancy-enabled N2 activation for ammonia synthesis on an Ni-loaded catalyst.

Ammonia (NH3) is pivotal to the fertilizer industry and one of the most commonly produced chemicals1. The direct use of atmospheric nitrogen (N2) had been challenging, owing to its large bond energy (945 kilojoules per mole)2,3, until the development of the Haber-Bosch process. Subsequently, many strategies have been explored to reduce the activation barrier of the N≡N bond and make the process more efficient. These include using alkali and alkaline earth metal oxides as promoters to boost the performance of traditional iron- and ruthenium-based catalysts4-6 via electron transfer from the promoters to the antibonding bonds of N2 through transition metals7,8. An electride support further lowers the activation barrier because its low work function and high electron density enhance electron transfer to transition metals9,10. This strategy has facilitated ammonia synthesis from N2 dissociation11 and enabled catalytic operation under mild conditions; however, it requires the use of ruthenium, which is expensive. Alternatively, it has been shown that nitrides containing surface nitrogen vacancies can activate N2 (refs. 12-15). Here we report that nickel-loaded lanthanum nitride (LaN) enables stable and highly efficient ammonia synthesis, owing to a dual-site mechanism that avoids commonly encountered scaling relations. Kinetic and isotope-labelling experiments, as well as density functional theory calculations, confirm that nitrogen vacancies are generated on LaN with low formation energy, and efficiently bind and activate N2. In addition, the nickel metal loaded onto the nitride dissociates H2. The use of distinct sites for activating the two reactants, and the synergy between them, results in the nickel-loaded LaN catalyst exhibiting an activity that far exceeds that of more conventional cobalt- and nickel-based catalysts, and that is comparable to that of ruthenium-based catalysts. Our results illustrate the potential of using vacancy sites in reaction cycles, and introduce a design concept for catalysts for ammonia synthesis, using naturally abundant elements.

Stable single platinum atoms trapped in sub-nanometer cavities in 12CaO·7Al2O3 for chemoselective hydrogenation of nitroarenes.

Single-atom catalysts (SACs) have attracted significant attention because they exhibit unique catalytic performance due to their ideal structure. However, maintaining atomically dispersed metal under high temperature, while achieving high catalytic activity remains a formidable challenge. In this work, we stabilize single platinum atoms within sub-nanometer surface cavities in well-defined 12CaO·7Al2O3 (C12A7) crystals through theoretical prediction and experimental process. This approach utilizes the interaction of isolated metal anions with the positively charged surface cavities of C12A7, which allows for severe reduction conditions up to 600 °C. The resulting catalyst is stable and highly active toward the selective hydrogenation of nitroarenes with a much higher turnover frequency (up to 25772 h-1) than well-studied Pt-based catalysts. The high activity and selectivity result from the formation of stable trapped single Pt atoms, which leads to heterolytic cleavage of hydrogen molecules in a reaction that involves the nitro group being selectively adsorbed on C12A7 surface.

Palladium-bearing intermetallic electride as an efficient and stable catalyst for Suzuki cross-coupling reactions.

Suzuki cross-coupling reactions catalyzed by palladium are powerful tools for the synthesis of functional organic compounds. Excellent catalytic activity and stability require negatively charged Pd species and the avoidance of metal leaching or clustering in a heterogeneous system. Here we report a Pd-based electride material, Y3Pd2, in which active Pd atoms are incorporated in a lattice together with Y. As evidenced from detailed characterization and density functional theory (DFT) calculations, Y3Pd2 realizes negatively charged Pd species, a low work function and a high carrier density, which are expected to be beneficial for the efficient Suzuki coupling reaction of activated aryl halides with various coupling partners under mild conditions. The catalytic activity of Y3Pd2 is ten times higher than that of pure Pd and the activation energy is lower by nearly 35%. The Y3Pd2 intermetallic electride catalyst also exhibited extremely good catalytic stability during long-term coupling reactions.

Discovery of hexagonal ternary phase Ti2InB2 and its evolution to layered boride TiB.

Mn+1AXn phases are a large family of compounds that have been limited, so far, to carbides and nitrides. Here we report the prediction of a compound, Ti2InB2, a stable boron-based ternary phase in the Ti-In-B system, using a computational structure search strategy. This predicted Ti2InB2 compound is successfully synthesized using a solid-state reaction route and its space group is confirmed as P[Formula: see text]m2 (No. 187), which is in fact a hexagonal subgroup of P63/mmc (No. 194), the symmetry group of conventional Mn+1AXn phases. Moreover, a strategy for the synthesis of MXenes from Mn+1AXn phases is applied, and a layered boride, TiB, is obtained by the removal of the indium layer through dealloying of the parent Ti2InB2 at high temperature under a high vacuum. We theoretically demonstrate that the TiB single layer exhibits superior potential as an anode material for Li/Na ion batteries than conventional carbide MXenes such as Ti3C2.

Copper-Based Intermetallic Electride Catalyst for Chemoselective Hydrogenation Reactions.

The development of transition metal intermetallic compounds, in which active sites are incorporated in lattice frameworks, has great potential for modulating the local structure and the electronic properties of active sites, and enhancing the catalytic activity and stability. Here we report that a new copper-based intermetallic electride catalyst, LaCu0.67Si1.33, in which Cu sites activated by anionic electrons with low work function are atomically dispersed in the lattice framework and affords selective hydrogenation of nitroarenes with above 40-times higher turnover frequencies (TOFs up to 5084 h-1) than well-studied metal-loaded catalysts. Kinetic analysis utilizing isotope effect reveals that the cleavage of the H-H bond is the rate-determining step. Surprisingly, the high carrier density and low work function (LWF) properties of LaCu0.67Si1.33 enable the activation of hydrogen molecules with extreme low activation energy (Ea = 14.8 kJ·mol-1). Furthermore, preferential adsorption of nitroarenes via a nitro group is achieved by high oxygen affinity of LaCu0.67Si1.33 surface, resulting in high chemoselectivity. The present efficient catalyst can further trigger the hydrogenation of other oxygen-containing functional groups such as aldehydes and ketones with high activities. These findings demonstrate that the transition metals incorporated in the specific lattice site function as catalytically active centers and surpass the conventional metal-loaded catalysts in activity and stability.

Electronic interactions between a stable electride and a nano-alloy control the chemoselective reduction reaction.

Controlling the electronic structure of heterogeneous metal catalysts is considered an efficient method to optimize catalytic activity. Here, we introduce a new electronic effect induced by the synergy of a stable electride and bimetallic nanoparticles for a chemoselective reduction reaction. The electride [Ca24Al28O64]4+·(e-)4, with extremely low work function, promotes the superior activity and selectivity of a Ru-Fe nano-alloy for the conversion of α,ß-unsaturated aldehydes to unsaturated alcohols in a solvent-free system. The catalyst is easily separable from the product solution and reusable without notable deactivation. Mechanistic studies demonstrate that electron injection from the electride to the Ru-Fe bimetallic nanoparticles promotes H2 dissociation on the highly charged active metal and preferential adsorption of C[double bond, length as m-dash]O bonds over C[double bond, length as m-dash]Cs bond of the unsaturated aldehydes, to obtain the thermodynamically unfavorable but industrially important product.

Strongly veined carbon nanoleaves as a highly efficient metal-free electrocatalyst.

Effective integration of one-dimensional carbon nanofibers (CNF) and two-dimensional carbon sheets into three-dimensional (3D) conductive frameworks is essential for their practical applications as electrode materials. Herein, a novel "vein-leaf"-type 3D complex of carbon nanofibers with nitrogen-doped graphene (NG) was prepared through a simple thermal condensation of urea and bacterial cellulose. During the formation of the 3D complex CNF@NG, the graphene species was tethered to CNF via carbon-carbon bonds. Such an interconnected 3D network facilitates both the electron transfer and mass diffusion for electrochemical reactions.