Cobalt substitution-induced π-donation in NiMoO4 for enhanced electrochemical charge storage.

NiMoO4 (NM) has garnered significant attention due to its rich d-orbital electronic structure and multivalent electroactive cations. However, the inherently low electrical conductivity of NM limits its reaction kinetics. Herein, cobalt-substituted NM (Co-NM) nanorods were prepared via a hydrothermal reaction followed by subsequent thermal treatment. The incorporation of Ni-O-Co configurations stimulates an enhanced π-donation effect of the Co-O bond, facilitating the hybridization between the O 2p and Co 3d orbitals and thereby boosting charge transfer kinetics during electrochemical processes. The optimized 10 %Co-NM nanorods demonstrated a remarkable specific capacity of 557.8 C·g-1 at 1 A·g-1. Furthermore, an asymmetric supercapacitor constructed with 10 %Co-NM as the positive electrode and FeOOH as the negative electrode, achieved a significant energy density of 63.58 Wh·kg-1 at a power density of 805.38 W·kg-1. Thus, our work provides new insights into the rational design of stable bridging configurations to significantly improve electrochemical reaction kinetics.

Single Atom Engineered Antibiotics Overcome Bacterial Resistance.

The outbreak of antibiotic-resistant bacteria, or "superbugs", poses a global public health hazard due to their resilience against the most effective last-line antibiotics. Identifying potent antibacterial agents capable of evading bacterial resistance mechanisms represents the ultimate defense strategy. This study shows that -the otherwise essential micronutrient- manganese turns into a broad-spectrum potent antibiotic when coordinated with a carboxylated nitrogen-doped graphene. This antibiotic material (termed NGA-Mn) not only inhibits the growth of a wide spectrum of multidrug-resistant bacteria but also heals wounds infected by bacteria in vivo and, most importantly, effectively evades bacterial resistance development. NGA-Mn exhibits up to 25-fold higher cytocompatibility to human cells than its minimum bacterial inhibitory concentration, demonstrating its potential as a next-generation antibacterial agent. Experimental findings suggest that NGA-Mn acts on the outer side of the bacterial cell membrane via a multimolecular collective binding, blocking vital functions in both Gram-positive and Gram-negative bacteria. The results underscore the potential of single-atom engineering toward potent antibiotics, offering simultaneously a long-sought solution for evading drug resistance development while being cytocompatible to human cells.

Heterogeneous microstructure of γ-irradiated pre-oxidized PAN fiber revealed by microfocus SR-SAXS reconstruction and molecular simulation.

The microstructure plays a crucial role in the manufacturing and application of polyacrylonitrile fibers, which serve as precursors for carbon fibers. Synchrotron radiation small angle x-ray scattering (SR-SAXS) is a non-destructive and precise technique for analyzing fiber structures. This study employed one-dimensional SR-SAXS mapping to extract key structural parameters such as periodicity, lamellae thickness, and the extent of amorphous regions, as well as the directional orientation in γ-irradiated, pre-oxidized polyacrylonitrile fibers. The analysis revealed a three-layered structure comprising a surface skin, a transitional layer, and a central core. Notably, the lamellar thickness exhibits a "U"-shaped distribution, while the long-period structures, amorphous regions, and orientational properties demonstrate a "wave-like" pattern. Within this structure, the skin exhibits a higher level of orientation, with the orientation decreasing progressively from the skin toward the core layer. The structure of the layered crystal was further corroborated by the morphological analysis. In addition, molecular simulations were performed to propose the mechanisms underlying the formation of this layered structure. This comprehensive investigation using SR-SAXS and one-dimensional mapping provides detailed insights into the microstructural and morphological characteristics of polyacrylonitrile fibers, which can inform future advancements in material processing and refinement techniques for the production of advanced fibers.

Atomically Isolated Pd Sites Promote Electrochemical CO Reduction to Acetate through a Protonation-Regulated Mechanism.

Electrochemical CO reduction reaction (CORR) offers a promising approach for sustainable acetate production, the promotion of which requires the control of multiple protonation steps. This paper describes the synthesis of atomically isolated Pd sites onto Cu nanoflakes to regulate the protonation of key intermediates. The Pd sites with moderate water activation capability are found to enhance the protonation of *CO at the neighboring Cu site to *COH, which is confirmed to be the rate-determining step through kinetic isotope effect studies. The formation of *COH-*CO is therefore promoted. Additionally, the Pd sites would preferentially protonate the C-OH group in *COH-*CO due to the spatial approximability and electronic modulation effects, generating *CCO for the selective formation of acetate. An acetate Faradaic efficiency of 59.5% is achieved at -0.78 V vs reversible hydrogen electrode (RHE), with a maximum partial current density of 286 mA cm-2 at -0.86 V vs RHE. The optimized catalyst also exhibits long-term stability for 500 h at 100 mA cm-2 in a membrane electrode assembly. This work reveals a new promoting mechanism for selective CORR with simultaneous tuning of the structural and electronic properties of the proton-supplying sites.

Operando identification of the oxide path mechanism with different dual-active sites for acidic water oxidation.

The microscopic reaction pathway plays a crucial role in determining the electrochemical performance. However, artificially manipulating the reaction pathway still faces considerable challenges. In this study, we focus on the classical acidic water oxidation based on RuO2 catalysts, which currently face the issues of low activity and poor stability. As a proof-of-concept, we propose a strategy to create local structural symmetry but oxidation-state asymmetric Mn4-δ-O-Ru4+δ active sites by introducing Mn atoms into RuO2 host, thereby switching the reaction pathway from traditional adsorbate evolution mechanism to oxide path mechanism. Through advanced operando synchrotron spectroscopies and density functional theory calculations, we demonstrate the synergistic effect of dual-active metal sites in asymmetric Mn4-δ-O-Ru4+δ microstructure in optimizing the adsorption energy and rate-determining step barrier via an oxide path mechanism. This study highlights the importance of engineering reaction pathways and provides an alternative strategy for promoting acidic water oxidation.

Multivalent Cu sites synergistically adjust carbonaceous intermediates adsorption for electrocatalytic ethanol production.

Copper (Cu)-based catalysts show promise for electrocatalytic CO2 reduction (CO2RR) to multi-carbon alcohols, but thermodynamic constraints lead to competitive hydrocarbon (e.g., ethylene) production. Achieving selective ethanol production with high Faradaic efficiency (FE) and current density is still challenging. Here we show a multivalent Cu-based catalyst, Cu-2,3,7,8-tetraaminophenazine-1,4,6,9-tetraone (Cu-TAPT) with Cu2+ and Cu+ atomic ratio of about 1:2 for CO2RR. Cu-TAPT exhibits an ethanol FE of 54.3 ± 3% at an industrial-scale current density of 429 mA cm-2, with the ethanol-to-ethylene ratio reaching 3.14:1. Experimental and theoretical calculations collectively unveil that the catalyst is stable during CO2RR, resulting from suitable coordination of the Cu2+ and Cu+ with the functional groups in TAPT. Additionally, mechanism studies show that the increased ethanol selectivity originates from synergy of multivalent Cu sites, which can promote asymmetric C-C coupling and adjust the adsorption strength of different carbonaceous intermediates, favoring hydroxy-containing C2 intermediate (*HCCHOH) formation and formation of ethanol.

Highly efficient semi-hydrogenation in strained ultrathin PdCu shell and the atomic deciphering for the unlocking of activity-selectivity.

Excellent ethylene selectivity in acetylene semi-hydrogenation is often obtained at the expense of activity. To break the activity-selectivity trade-off, precise control and in-depth understanding of the three-dimensional atomic structure of surfacial active sites are crucial. Here, we designed a novel Au@PdCu core-shell nanocatalyst featuring diluted and stretched Pd sites on the ultrathin shell (1.6 nm), which showed excellent reactivity and selectivity, with 100% acetylene conversion and 92.4% ethylene selectivity at 122 °C, and the corresponding activity was 3.3 times higher than that of the PdCu alloy. The atomic three-dimensional decoding for the activity-selectivity balance was revealed by combining pair distribution function (PDF) and reverse Monte Carlo simulation (RMC). The results demonstrate that a large number of active sites with a low coordination number of Pd-Pd pairs and an average 3.25% tensile strain are distributed on the surface of the nanocatalyst, which perform a pivotal function in the simultaneous improvement of hydrogenation activity and ethylene selectivity. Our work not only develops a novel strategy for unlocking the linear scaling relation in heterogeneous catalysis but also provides a paradigm for atomic 3D understanding of lattice strain in core-shell nanocatalysts.

Spatial-coupled Ampere-level Electrochemical Propylene Epoxidation over RuO2/Ti Hollow-fiber Penetration Electrodes.

The electrochemical propylene epoxidation reaction (PER) provides a promising route for ecofriendly propylene oxide (PO) production, instantly generating active halogen/oxygen species to alleviate chloride contamination inherent in traditional PER. However, the complex processes and unsatisfactory PO yield for current electrochemical PER falls short of meeting industrial application requirements. Herein, a spatial-coupling strategy over RuO2/Ti hollow-fiber penetration electrode (HPE) is adopted to facilitate efficient PO production, significantly improving PER performance to ampere level (achieving over 80 % PO faradaic efficiency and a maximum PO current density of 859 mA cm-2). The synergetic combination of the penetration effect of HPE and the spatial-coupled reaction sequence, enables the realization of ampere-level PO production with high specificity, exhibiting significant potentials for economically viable PER applications.

Synchronized crystallization in tin-lead perovskite solar cells.

Tin-lead halide perovskites with a bandgap near 1.2 electron-volt hold great promise for thin-film photovoltaics. However, the film quality of solution-processed Sn-Pb perovskites is compromised by the asynchronous crystallization behavior between Sn and Pb components, where the crystallization of Sn-based perovskites tends to occur faster than that of Pb. Here we show that the rapid crystallization of Sn is rooted in its stereochemically active lone pair, which impedes coordination between the metal ion and Lewis base ligands in the perovskite precursor. From this perspective, we introduce a noncovalent binding agent targeting the open metal site of coordinatively unsaturated Sn(II) solvates, thereby synchronizing crystallization kinetics and homogenizing Sn-Pb alloying. The resultant single-junction Sn-Pb perovskite solar cells achieve a certified power conversion efficiency of 24.13 per cent. The encapsulated device retains 90 per cent of the initial efficiency after 795 h of maximum power point operation under simulated one-sun illumination.

Resolve the species-specific effects of iron (hydr)oxides on the performance of underlying zerovalent iron for metalloid removal: Identification of their key properties.

Despite the importance of surface iron (hydr)oxides (Fe-(hydr)oxides) for the decontamination performance of zerovalent iron (ZVI) -based technologies has been well recognized, controversial understandings of their exact roles still exist due to the complex species distribution of Fe-(hydr)oxides. Herein, we re-structured the surface of ZVI using eight distinct Fe-(hydr)oxides and analyzed their species-specific effects on the performance of ZVI for Se(IV) under well-controlled conditions. The kinetics-relevant performance indicators (Se(IV) removal rates, Fe2+ release rates, and the utilization ratio of ZVI) under the effect of each Fe-(hydr)oxide roughly followed the order: δ-FeOOH > Fe5HO8·4H2O > α-FeOOH > ß-FeOOH > Î³-FeOOH > Î³-Fe2O3 > Fe3O4 > α-Fe2O3. Multiple linear regression analysis shows that the large pore volume and size (instead of specific surface area), low open-circuit potential, and low electrochemical impedance are key positive properties for kinetics-relevant performance. Besides, for electron efficiency of ZVI, only Fe3O4 increased the value to 50.0%, due to the contribution of its ferrous components, while others did not change it (∼20%). Additional experiments with commercial ZVI covered by individual Fe-(hydr)oxides confirmed the observed species-specific trends. All these results not only provide new basis for mechanism explanation but also have practical implications for the production or modification of ZVI.

Coupling High-Entropy Core with Rh Shell for Efficient pH-Universal Hydrogen Evolution.

Constructing high-entropy alloys (HEAs) with core-shell (CS) nanostructure is efficient for enhancing catalytic activity. However, it is extremely challenging to incorporate the CS structure with HEAs. Herein, PtCoNiMoRh@Rh CS nanoparticles (PtCoNiMoRh@Rh) with ∼5.7 nm for pH-universal hydrogen evolution reaction (HER) are reported for the first time. The PtCoNiMoRh@Rh just require 9.1, 24.9, and 17.1 mV to achieve -10 mA cm-2 in acid, neutral, and alkaline electrolyte, and the corresponding mass activity are 5.8, 2.79, and 91.8 times higher than that of Rh/C. Comparing to PtCoNiMoRh nanoparticles, the PtCoNiMoRh@Rh exhibit excellent HER activity attributed to the decrease of Rh 4d especially 4d5/2 unoccupied state induced by the multi-active sites in HEA, as well as the synergistic effect in Rh shell and HEA core. Theorical calculation exhibits that Rh-dyz, dx2, and dxz orbitals experience a negative shift with shell thickness increasing. The HEAs with CS structure would facilitate the rational design of high-performance HEAs catalysts.

Atomic Structure Amorphization and Electronic Structure Reconstruction of FeCoNiCrMox High-Entropy Alloy Nanoparticles for Highly Efficient Water Oxidation.

The complexity of the multielement interaction in high-entropy alloys (HEAs) may provide more active sites to adapt different catalytic reaction steps in oxygen evolution reaction (OER). Investigating the correlation between structure and performance of HEAs electrocatalysts is both essential and challenging. In this work, FeCoNiCrMox HEA nanoparticles are successfully fabricated utilizing a unique nanofabrication method called inert gas condensation. With the increase of high-valence metal component Mo, the atomic structure amorphization and electronic structure reconstruction are unveiled. According to the X-ray photoelectron spectroscopy valence spectra, the d-band center of FeCoNiCrMox is ascending, and thus enhancing the adsorption energy. Synchrotron pair distribution function analysis reflects the degree of structural disorder and reveals a robust correlation with the intrinsic OER activities of the electrocatalysts. FeCoNiCrMo1.0 high-entropy metallic glass nanoparticles exhibit an outstanding OER performance with an ultralow overpotential of 294.5 mV at a high current density of 100 mA cm-2. This work brings fundamental and practical insights into the modulation mechanism of metal components of HEAs catalysts for developing OER.

Main-Group Metal-Nonmetal Dynamic Proton Bridges Enhance Ammonia Electrosynthesis.

The electrochemical nitrogen reduction reaction is a crucial process for the sustainable production of ammonia for energy and agriculture applications. However, the reaction's efficiency is highly dependent on the activation of the inert N≡N bond, which is hindered by the electron back-donation to the π* orbitals of the N≡N bond, resulting in low eNRR capacity. Herein, we report a main-group metal-non-metal (O-In-S) eNRR catalyst featuring a dynamic proton bridge, with In-S serving as the polarization pair and O functioning as the dynamic electron pool. In-situ spectroscopic analysis and theoretical calculations reveal that the In-S polarization pair acts as asymmetric dual-sites, polarizing the N≡N bond by concurrently back-donating electrons to both the πx* and πy* orbitals of N2, thereby overcoming the significant band gap limitations, while inhibiting the competitive hydrogen evolution reaction. Meanwhile, the O dynamic electron pool acts as a "repository" for electron storage and donation to the In-S polarization pair. As a result, the O-In-S dynamic proton bridge exhibits exceptional NH3 yield rates and Faradaic efficiencies (FEs) across a wide potential window of 0.3 V, with an optimal NH3 yield of 80.07 ± 4.25 µg h-1 mg-1 and an FE of 38.01 ± 2.02%, outperforming most previously reported catalysts.

Ligand-tuning copper in coordination polymers for efficient electrochemical C-C coupling.

Cu catalyses electrochemical CO2 reduction to valuable multicarbon products but understanding the structure-function relationship has remained elusive due to the active Cu sites being heterogenized and under dynamic re-construction during electrolysis. We herein coordinate Cu with six phenyl-1H-1,2,3-triazole derivatives to form stable coordination polymer catalysts with homogenized, single-site Cu active sites. Electronic structure modelling, X-ray absorption spectroscopy, and ultraviolet-visible spectroscopy show a widely tuneable Cu electronics by modulating the highest occupied molecular orbital energy of ligands. Using CO diffuse reflectance Fourier transform infrared spectroscopy, in-situ Raman spectroscopy, and density functional theory calculations, we find that the binding strength of *CO intermediate is positively correlated to highest occupied molecular orbital energies of the ligands. As a result, we enable a tuning of C-C coupling efficiency-a parameter we define to evaluate the efficiency of C2 production-in a broad range of 0.26 to 0.86. This work establishes a molecular platform that allows for studying structure-function relationships in CO2 electrolysis and devises new catalyst design strategies appliable to other electrocatalysis.

Tensile-Strained Cu Penetration Electrode Boosts Asymmetric C-C Coupling for Ampere-Level CO2-to-C2+ Reduction in Acid.

The synthesis of multicarbon (C2+) products remains a substantial challenge in sustainable CO2 electroreduction owing to the need for sufficient current density and faradaic efficiency alongside carbon efficiency. Herein, we demonstrate ampere-level high-efficiency CO2 electroreduction to C2+ products in both neutral and strongly acidic (pH=1) electrolytes using a hierarchical Cu hollow-fiber penetration electrode (HPE). High concentration of K+ could concurrently suppress hydrogen evolution reaction and facilitate C-C coupling, thereby promoting C2+ production in strong acid. By optimizing the K+ and H+ concentration and CO2 flow rate, a faradaic efficiency of 84.5 % and a partial current density as high as 3.1 A cm-2 for C2+ products, alongside a single-pass carbon efficiency of 81.5 % and stable electrolysis for 240 h were demonstrated in a strong acidic solution of H2SO4 and KCl (pH=1). Experimental measurements and density functional theory simulations suggested that tensile-strained Cu HPE enhances the asymmetric C-C coupling to steer the selectivity and activity of C2+ products.

Single-Atom 3d Transition Metals on SnO2 as Model Cell for Conversion Mechanism: Revealing Thermodynamic Catalytic Effects on Enhanced Na Storage of Heterostructures.

Since the discovery in 2000, conversion-type materials have emerged as a promising negative-electrode candidate for next-generation batteries with high capacity and tunable voltage, limited by low reversibility and severe voltage hysteresis. Heterogeneous construction stands out as a cost-effective and efficient approach to reducing reaction barriers and enhancing energy density. However, the second term introduced by conventional heterostructure inevitably complicates the electrochemical analysis and poses great challenges to harvesting systematic insights and theoretical guidance. A model cell is designed and established herein for the conversion reactions between Na and TMSA-SnO2, where TMSA-SnO2 represents single atom modification of eight different 3d transition elements (V, Cr, Mn, Fe, Co, Ni, Cu or Zn). Such a model unit fundamentally eliminates the interference from the second phase and thus enables independent exploration of activation manifestations of the heterogeneous architecture. For the first time, a thermodynamically dependent catalytic effect is proposed and verified through statistical data analysis. The mechanism behind the unveiled catalytic effect is further elucidated by which the active d orbitals of transition metals weaken the surface covalent bonds and lower the reaction barriers. This research provides both theoretical insights and practical demonstrations of the advanced heterogeneous electrodes.

Grain Boundary Defect Engineering in Rutile Iridium Oxide Boosts Efficient and Stable Acidic Water Oxidation.

Proton exchange membrane water electrolysis (PEMWE) is considered a promising technology for coupling with renewable energy sources to achieve clean hydrogen production. However, constrained by the sluggish kinetics of the anodic oxygen evolution reaction (OER) and the acidic abominable environment render the grand challenges in developing the active and stable OER electrocatalyst, leading to low efficiency of PEMWE. Herein, we develop the rutile-type IrO2 nanoparticles with abundant grain boundaries and the continuous nanostructure through the joule heating and sacrificial template method. The optimal candidate (350-IrO2) demonstrates remarkable electrocatalytic activity and stability during the OER, presenting a promising advancement for efficient PEMWE. DFT calculations verified that grain boundaries can modulate the electronic structure of Ir sites and optimize the adsorption of oxygen intermediates, resulting in the accelerated kinetics. 350-IrO2 affords a rapid OER process with 20 times higher mass activity (0.61 A mgIr -1) than the commercial IrO2 at 1.50 V vs. RHE. Benefiting from the reduced overpotential and the preservation of the stable rutile structure, 350-IrO2 exhibits the stability of 200 h test at 10 mA cm-2 with only trace decay of 11.8 mV. Moreover, the assembled PEMWE with anode 350-IrO2 catalyst outputs the current density up to 2 A cm-2 with only 1.84 V applied voltage, long-term operation for 100 h without obvious performance degradation at 1 A cm-2.

Electron Accumulation Induced by Electron Injection-Incomplete Discharge on NiFe LDH for Enhanced Oxygen Evolution Reaction.

Optimizing the local electronic structure of electrocatalysts can effectively lower the energy barrier of electrochemical reactions, thus enhancing the electrocatalytic activity. However, the intrinsic contribution of the electronic effect is still experimentally unclear. In this work, the electron injection-incomplete discharge approach to achieve the electron accumulation (EA) degree on the nickel-iron layered double hydroxide (NiFe LDH) is proposed, to reveal the intrinsic contribution of EA toward oxygen evolution reaction (OER). Such NiFe LDH with EA effect results in only 262 mV overpotential to reach 50 mA cm-2, which is 51 mV-lower compared with pristine NiFe LDH (313 mV), and reduced Tafel slope of 54.8 mV dec-1 than NiFe LDH (107.5 mV dec-1). Spectroscopy characterizations combined with theoretical calculations confirm that the EA near concomitant Vo can induce a narrower energy gap and lower thermodynamic barrier to enhance OER performance. This study clarifies the mechanism of the EA effect on OER activity, providing a direct electronic structure modulation guideline for effective electrocatalyst design.

Strengthening the Synergy between Oxygen Vacancies in Electrocatalysts for Efficient Glycerol Electrooxidation.

Defect-engineered bimetallic oxides exhibit high potential for the electrolysis of small organic molecules. However, the ambiguity in the relationship between the defect density and electrocatalytic performance makes it challenging to control the final products of multi-step multi-electron reactions in such electrocatalytic systems. In this study, controllable kinetics reduction is used to maximize the oxygen vacancy density of a Cu─Co oxide nanosheet (CuCo2O4 NS), which is used to catalyze the glycerol electrooxidation reaction (GOR). The CuCo2O4-x NS with the highest oxygen-vacancy density (CuCo2O4-x-2) oxidizes C3 molecules to C1 molecules with selectivity of almost 100% and a Faradaic efficiency of ≈99%, showing the best oxidation performance among all the modified catalysts. Systems with multiple oxygen vacancies in close proximity to each other synergistically facilitate the cleavage of C─C bonds. Density functional theory calculations confirm the ability of closely spaced oxygen vacancies to facilitate charge transfer between the catalyst and several key glycolic-acid (GCA) intermediates of the GOR process, thereby facilitating the decomposition of C2 intermediates to C1 molecules. This study reveals qualitatively in tuning the density of oxygen vacancies for altering the reaction pathway of GOR by the synergistic effects of spatial proximity of high-density oxygen vacancies.