Antibiotic-induced severe cutaneous adverse reactions: a single-center retrospective study over ten years.

Objective: Severe cutaneous adverse reactions (SCARs) are rare but life-threatening, with antibiotics being the main cause. This retrospective study from a single center was designed to analyze the culprit drugs, clinical features and treatment outcomes of antibiotic-induced SCARs. Methods: We analyzed cases of antibiotic-induced SCARs in a tertiary hospital in China between January 2013 and January 2024, including Steven-Johnson syndrome (SJS) or Stevens-Johnson syndrome-toxic epidermal necrolysis (SJS-TEN) overlap, toxic epidermal necrolysis (TEN), drug reaction with eosinophilia and systemic symptoms (DRESS) and acute generalized exanthematous pustulosis (AGEP). Descriptive analysis of the demographic characteristics, clinical manifestations, treatment and prognosis were carried out. Results: Among 354 cases of SCARs, 63 validated antibiotic-related cases were included. Cephalosporins (31.7%), penicillins (25.4%), and quinolones (19.0%) were the most common triggers for SCARs. Overall, liver (50.8%), lungs (31.7%), and kidneys (23.8%) were the most frequently affected organ in SCARs cases. Eight patients (28.6%) in the SJS/SJS-TEN overlap group and 8 patients (80.0%) in the TEN group received combination therapy of corticosteroids and IVIG. Patients with SCARs caused by penicillins or cephalosporins could receive alternative treatments such as lincomamides, quinolones, and tetracyclines. The mortality rate in the TEN group was the highest at 20.0%, followed by the SJS/SJS-TEN overlap group (7.1%), and no deaths were observed in the DRESS and AGEP groups. Conclusion: The identification of the culprit antibiotics and the application of alternative antibiotic therapies are crucial for the management of antibiotic-induced SCARs. If complicated underlying conditions and complications like advanced age, cancer and pneumonia coexist with SCARs, patients might be more at risk for mortality.

Is catheterization via distal transradial access feasible in children? From vessel diameter perspective.

Background: Distal radial artery (DRA) access is an infrequent alternative access for pediatric catheterization. The feasibility of using the DRA for arterial catheterization in children depends on the vessel's size. Objectives: This study aims to provide a reference for pediatric catheterization via DRA access by evaluating the diameter of the DRA in the anatomic snuffbox (AS). Methods: We conducted a retrospective review of clinical and vascular ultrasound data of 412 children (ages 3-12) who were scheduled for arterial blood gas analysis via the DRA due to serious respiratory diseases between June 2023 and October 2023. Results: The corrected DRA diameter in the AS was 1.97 ± 0.37 mm overall, with no significant difference between males (1.98 ± 0.38 mm) and females (1.95 ± 0.35 mm) (p = 0.457). The anteroposterior, transverse, and corrected DRA diameters increased significantly with age (p < 0.05). The DRA diameter was significantly smaller than the proximal radial artery (PRA) diameter (1.97 ± 0.37 mm vs. 2.05 ± 0.33 mm, p < 0.001) but larger than the ulnar artery (UA) diameter (1.97 ± 0.37 mm vs. 1.88 ± 0.33 mm, p < 0.001). The proportions of patients with a DRA diameter greater than 2.0 mm and 1.5 mm were 38.83% and 86.89%, respectively. The proportions of patients with DRA diameters >2.0 mm and >1.5 mm increased significantly with age (p < 0.01). The percentages of individuals with a DRA/PRA ratio ≥1.0 were 55.10% overall, 52.12% in males, and 58.60% in females. DRA diameter showed significant correlations with age (r = 0.275, p < 0.01), height (r = 0.319, p < 0.01), weight (r = 0.319, p < 0.01), BMI (r = 0.241, p < 0.01), wrist circumference (r = 0.354, p < 0.01), PRA diameter (r = 0.521, p < 0.01), and UA diameter (r = 0.272, p < 0.01). Conclusion: The DRA diameter in children increases with age and size, making cardiac catheterization is theoretically feasible. Preoperative evaluation of the vessel diameter and intraoperative ultrasound-guided intervention are recommended for paediatric catheterization via the DRA access.

Transformer for low concentration image denoising in magnetic particle imaging.

Objective.Magnetic particle imaging (MPI) is an emerging tracer-basedin vivoimaging technology. The use of MPI at low superparamagnetic iron oxide nanoparticle concentrations has the potential to be a promising area of clinical application due to the inherent safety for humans. However, low tracer concentrations reduce the signal-to-noise ratio of the magnetization signal, leading to severe noise artifacts in the reconstructed MPI images. Hardware improvements have high complexity, while traditional methods lack robustness to different noise levels, making it difficult to improve the quality of low concentration MPI images.Approach.Here, we propose a novel deep learning method for MPI image denoising and quality enhancing based on a sparse lightweight transformer model. The proposed residual-local transformer structure reduces model complexity to avoid overfitting, in which an information retention block facilitates feature extraction capabilities for the image details. Besides, we design a noisy concentration dataset to train our model. Then, we evaluate our method with both simulated and real MPI image data.Main results.Simulation experiment results show that our method can achieve the best performance compared with the existing deep learning methods for MPI image denoising. More importantly, our method is effectively performed on the real MPI image of samples with an Fe concentration down to 67µgFeml-1.Significance.Our method provides great potential for obtaining high quality MPI images at low concentrations.

Sunflower-Inspired Superhydrophobic Surface with Composite Structured Microcone Array for Anisotropy Liquid/Ice Manipulation.

Precisely controlling the directional motion trajectories of droplets on anisotropic 3D functional surfaces has great application potential in self-cleaning, drug delivery, and droplet power generation, but it also faces huge challenges. Herein, inspired by the microcone structure in the heart of sunflowers, a nanoneedle-modified microcone array surface (NMAS) is reported. The surface is created using a combination of nanosecond laser direct engraving and electroforming and is subsequently fluorinated. Through programmable control of the laser spot, the geometric parameters and inclination angle of the microcone can be quickly and finely adjusted, thereby achieving precise control of the droplet bouncing trajectory. The results show that droplets can achieve programmable multiple bouncing behaviors on patterned functional surfaces, including gravity-defying hopping and directional water transport. It is worth noting that this functional surface has delayed freezing and anti-freezing effects. Furthermore, this functional surface has a wide range of potential applications, including surface self-cleaning, droplet capture, and droplet-based chemical microreactions, especially in the field of anti-icing operations. This opens up a new way for the directional transport of droplets on biomimetic functional surfaces.

Causal relationship between the gut microbiota, immune cells, and coronary heart disease: a mediated Mendelian randomization analysis.

Background: Recent studies have shown that the gut microbiota (GM), immune cells, and coronary heart disease (CHD) are closely related, but the causal nature of these relationships is largely unknown. This study aimed to investigate this causal relationship and reveal the effect of GM and immune cells on the risk of developing CHD using mediated Mendelian randomization (MR) analysis. Methods: First, we searched for data related to GM, immune cells, and CHD through published genome-wide association studies (GWAS). We filtered the single nucleotide polymorphisms (SNPs) associated with GM and immune cells and then performed the first MR analysis to identify disease-associated intestinal bacteria and disease-associated immune cells. Subsequently, three MR analyses were conducted: from disease-associated GM to disease-associated immune cells, from disease-associated immune cells to CHD, and from disease-associated GM to CHD. Each MR analysis was conducted using inverse variance weighting (IVW), MR-Egger regression, weighted median, weighted models, and simple models. Results: A total of six GM and 25 immune cells were found to be associated with CHD. In the MR analysis using the inverse variance weighting (IVW) method, g__Desulfovibrio.s__Desulfovibrio_piger was associated with EM DN (CD4-CD8-) %T cells (P < 0.05 and OR > 1), EM DN (CD4-CD8-) %T cells was associated with CHD (P < 0.05 and OR < 1), and g__Desulfovibrio.s__Desulfovibrio_piger was associated with CHD (P < 0.05 and OR < 1). Conclusion: An increase in the abundance of g__Desulfovibrio.s__Desulfovibrio_piger leads to an increase in the amount of EM DN (CD4-CD8-) %T cells, and an increase in the amount of EM DN (CD4-CD8-) %T cells reduces the risk of developing CHD. Our study provides some references for reducing the incidence of CHD by regulating GM and immune cells.

Five-Year Outcomes of Bioresorbable Stent Therapy for Coronary Heart Disease: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

Background: The efficacy of bioresorbable vascular scaffolds (BVS) compared to metallic stents for the treatment of coronary heart disease remains controversial. The analysis of clinical outcomes at five years following the initial treatment has yet to be reviewed. This study sought to assess the five-year outcomes in randomized controlled trials of BVS in the treatment of coronary heart disease using a systematic review and meta-analysis. Methods: A systematic database search was conducted from their inception to June 30th, 2023 using various Medical Subject Headings (MeSH) terms including: "Coronary Disease", "Bioresorbable stent", "Randomized controlled trials". Results: After a rigorous selection process, a total of five high-quality articles were finally included in this study. Each trial demonstrated a low risk of bias. After 5 years, bioresorbable stents showed outcomes similar to conventional metal stents in terms of cardiac mortality. However, they were inferior in terms of lesion revascularization rates, in-stent thrombosis rates, target lesion failure, target vessel failure, and myocardial infarction. Conclusions: While bioresorbable stents are comparable to metallic stents in terms of cardiac mortality rates, they exhibit significant drawbacks that warrant clinical consideration.

Bio-inspired Mechanically Responsive Smart Windows for Visible and Near-Infrared Multiwavelength Spectral Modulation.

Mechanochromic light control technology that can dynamically regulate solar irradiation is recognized as one of the leading candidates for energy-saving windows. However, the lack of spectrally selective modulation ability still hinders its application for different scenarios or individual needs. Here, inspired by the generation of structure color and color change of living organisms, a simple layer-by-layer assembly approach toward large-area fabricating mechanically responsive film for visible and near-infrared multiwavelength spectral modulation smart windows is reported here. The assembled SiO2 nanoparticles and W18O49 nanowires enable the film with an optical modulation rate of up to 42.4% at the wavelength of 550 nm and 18.4% for the near-infrared region, separately, and the typical composite film under 50% stretching shows ≈41.6% modulation rate at the wavelength of 550 nm with NIR modulation rate less than 2.7%. More importantly, the introduction of the multilayer assembly structure not only optimizes the film's optical modulation but also enables the film with high stability during 100 000 stretching cycles. A cooling effect of 21.3 and 6.9 °C for the blackbody and air inside a model house in the real environmental application is achieved. This approach provides theoretical and technical support for the new mechanochromic energy-saving windows.

Bromate-induced oxidation of carbamazepine and toxicity assessment of transformation products in the freezing-sunlight process: Effects of trivalent chromium.

Bromate (BrO3-)-induced pharmaceutical and personal care products (PPCPs) oxidation is enhanced in freezing systems. Reduced forms of metals are widely present, often coexisting with various contaminants. However, their effects on the interaction of PPCPs with BrO3- in ice in cold regions may have been overlooked. Herein we investigated the effects of representative reducing metal Cr(III) on the interaction between the representative PPCP carbamazepine (CBZ) and BrO3- in the freezing system. Our findings demonstrated that the degradation rate constants of CBZ by BrO3- and Cr(III) were 29.4%-60.3% lower than those by BrO3- in ice, revealing the inhibition of Cr(III) on CBZ degradation by BrO3- in ice. In BrO3-/freezing/sunlight system, BrO3- contributed 62.8% to CBZ degradation. In BrO3-/Cr(III)/freezing/sunlight system, Cr(III) promoted the generation of hydroxyl radical (·OH), leading to 51.0% contribution of ·OH to CBZ degradation. Oxidants were consumed by Cr(III) to form Cr(VI) rather than reacting with CBZ, thereby decreasing CBZ degradation by BrO3- in ice. Due to sunlight-induced Cr(VI) reduction in ice, only 0.3% of Cr(III) was converted to Cr(VI) in BrO3-/Cr(III)/freezing/sunlight system. BrO3--induced CBZ degradation rate in ice decreased in order of Fe(II), Cr(III), and Mn(II), which was due to the different reducing capabilities. An effective reduction in comprehensive toxicity of systems followed the freezing-sunlight process, even in the presence of Cr(III). This work sheds new light on the environmental behaviors and fate of PPCPs, brominated disinfection by-products, and reducing metals during seasonal freezing.

Research hotspots and trends of spinal cord stimulation for neuropathic pain: a bibliometric analysis from 2004 to 2023.

The purpose of this study is to systematically analyze the development trend, research hotspots, and future development direction on the treatment of neuropathic pain (NP) with spinal cord stimulation through bibliometric method. We extracted the literature related to the treatment of NP with spinal cord stimulation from January 2004 to December 2023 from the Web of Science database. As a result, a total of 264 articles were retrieved. By analyzing the annual published articles, authors, countries, institutions, journals, co-cited literature, and keywords, we found that the count of publication in this field has been experiencing an overall growth, and the publications within the past 5 years accounted for 42% of the total output. Experts from the United States and the UK have made significant contributions in this field and established a stable collaborative team, initially establishing an international cooperation network. Pain is the frequently cited journal in this field. The study on spinal cord stimulation therapy for NP especially the study on spinal cord stimulation therapy for back surgery failure syndrome (FBSS) and its potential mechanisms are the research hotspots in this field, while the study on novel paradigms such as high-frequency spinal cord stimulation and spinal cord burst stimulation represents the future development directions. In short, spinal cord stimulation has been an effective treatment method for NP. The novel paradigms of spinal cord stimulation are the key point of future research in this field.

Copper-loaded Milk-Protein Derived Microgel Preserves Cardiac Metabolic Homeostasis After Myocardial Infarction.

Myocardial Infarction (MI) is a leading cause of death worldwide. Metabolic modulation is a promising therapeutic approach to prevent adverse remodeling after MI. However, whether material-derived cues can treat MI through metabolic regulation is mainly unexplored. Herein, a Cu2+ loaded casein microgel (CuCMG) aiming to rescue the pathological intramyocardial metabolism for MI amelioration is developed. Cu2+ is an important ion factor involved in metabolic pathways, and intracardiac copper drain is observed after MI. It is thus speculated that intramyocardial supplementation of Cu2+ can rescue myocardial metabolism. Casein, a milk-derived protein, is screened out as Cu2+ carrier through molecular-docking based on Cu2+ loading capacity and accessibility. CuCMGs notably attenuate MI-induced cardiac dysfunction and maladaptive remodeling, accompanied by increased angiogenesis. The results from unbiased transcriptome profiling and oxidative phosphorylation analyses support the hypothesis that CuCMG prominently rescued the metabolic homeostasis of myocardium after MI. These findings enhance the understanding of the design and application of metabolic-modulating biomaterials for ischemic cardiomyopathy therapy.

Application prospects of the 2BS cell-adapted China fixed rabies virus vaccine strain 2aG4-B40.

BACKGROUND: Rabies is a fatal zoonotic disease whose pathogenesis has not been fully elucidated, and vaccination is the only effective method for protecting against rabies virus infection. Most inactivated vaccines are produced using Vero cells, which are African green monkey kidney cells, to achieve large-scale production. However, there is a potential carcinogenic risk due to nonhuman DNA contamination. Thus, replacing Vero cells with human diploid cells may be a safer strategy. In this study, we developed a novel 2BS cell-adapted rabies virus strain and analysed its sequence, virulence and immunogenicity to determine its application potential as a human diploid cell inactivated vaccine. METHODS AND RESULTS: The 2BS cell-adapted rabies virus strain 2aG4-B40 was established by passage for 40 generations and selection of plaques in 2BS cells. RNA sequence analysis revealed that mutations in 2BS cell-adapted strains were not located at key sites that regulate the production of neutralizing antibodies or virulence in the aG strain (GQ412744.1). The gradual increase in virulence (remaining above 7.0 logLD50/ml from the 40th to 55th generation) and antigen further indicated that these mutations may increase the affinity of the adapted strains for human diploid cells. Identification tests revealed that the 2BS cell-adapted virus strain was neutralized by anti-rabies serum, with a neutralization index of 19,952. PrEP and PEP vaccination and the NIH test further indicated that the vaccine prepared with the 2aG4-B40 strain had high neutralizing antibody levels (2.24 to 46.67 IU/ml), immunogenicity (protection index 270) and potency (average 11.6 IU/ml). CONCLUSIONS: In this study, a 2BS cell-adapted strain of the 2aG4 rabies virus was obtained by passage for 40 generations. The results of sequencing analysis and titre determination of the adapted strain showed that the mutations in the adaptive process are not located at key sequence regions of the virus, and these mutations may enhance the affinity of the adapted strain for human diploid cells. Moreover, vaccines made from the adapted strain 2aG4-B40 had high potency and immunogenicity and could be an ideal candidate rabies virus strain for inactivated vaccine preparation.

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing.

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

Highly exposed metal atomic active sites in Al2O3/CoNC: Modify reaction pathways by coupling oxygen species.

The catalytic oxidation of formaldehyde (HCHO) at ambient temperature is a highly efficient, cost-effective and environmentally friendly approach for formaldehyde removal. Reactive oxygen (O*) and reactive hydroxyl groups (OH*) are the main active species in the catalytic oxidation reaction of HCHO. Therefore, it is crucial to design catalysts that can simultaneously enhance the surface concentrations of O* and OH*, thereby improving their overall catalytic performance. The present study aimed to design an Al2O3/CoNC catalyst featuring layered carbon nitride coupled with metal oxides possessing domain-limited cobalt (Co) metal active sites, to efficiently remove HCHO (≈100 %, 100 ppm, RH=50 %, GSHV=20,000 mL/(g h)) and ensure stability (more than 90 % formaldehyde removal within 450 h) at ambient temperature. The characterization revealed that the interaction between Al2O3-supported metal and CoNC resulted in enhanced confinement of Co, leading to a higher abundance of edge structures exposing more active sites. Additionally, the presence of highly dispersed Co-NX active sites and increased oxygen vacancies effectively facilitated the adsorption and activation processes of HCHO and O2, as well as the adsorption and desorption dynamics of intermediates during the reaction. These factors collectively contributed to an improved catalytic activity. The results of in situ infrared spectroscopy revealed that the catalyst improved the adsorption and activation of O2 and H2O, leading to the rapid generation of substantial amounts of O* and OH*. This synergistic interaction between Al2O3 and CoNC plays a crucial role in the sustained production of O* and OH*, promoting efficient of intermediate decomposition, and ensuring excellent catalytic activity and stability for HCHO.

First-trimester hemoglobin, haptoglobin genotype, and risk of gestational diabetes mellitus in a retrospective study among Chinese pregnant women.

BACKGROUND: This study aimed to assess whether the Haptoglobin (Hp) genotype influences the relationship between hemoglobin (Hb) levels and the development of gestational diabetes mellitus (GDM). Additionally, it sought to evaluate the interaction and joint association of Hb levels and Hp genotype with GDM risk. METHODS: This retrospective study involved 358 women with GDM and 1324 women with normal glucose tolerance (NGT). Peripheral blood leukocytes were collected from 360 individuals at 14-16 weeks' gestation for Hp genotyping. GDM was diagnosed between 24-28 weeks' gestation. Interactive moderating effect, joint analysis, and mediation analysis were performed to evaluate the crosslink of Hb levels and Hp genotype with GDM risk. RESULTS: Women who developed GDM had significantly higher Hb levels throughout pregnancy compared to those with NGT. Increase first-trimester Hb concentration was associated with a progressive rise in GDM incidence, glucose levels, glycosylated hemoglobin levels, Homeostasis Model Assessment for Insulin Resistance (HOMA-IR) values, cesarean delivery rates, and composite neonatal outcomes. Spline regression showed a significant linear association of GDM incidence with continuous first-trimester Hb level when the latter exceeded 122 g/L. Increased first-trimester Hb concentration was an independent risk factor for GDM development after adjusting for potential confounding factors in both the overall population and a matched case-control group. The Hp2-2 genotype was more prevalent among pregnant women with GDM when first-trimester Hb exceeded 122 g/L. Significant multiplicative and additive interactions were identified between Hb levels and Hp genotype for GDM risk, adjusted for age and pre-pregnancy BMI. The odds ratio (OR) for GDM development increased incrementally when stratified by Hb levels and Hp genotype. Moreover, first-trimester Hb level partially mediated the association between Hp genotype and GDM risk. CONCLUSION: Increased first-trimester Hb levels were closely associated with the development of GDM and adverse pregnancy outcomes, with this association moderated by the Hp2-2 genotype.

Development of pea protein nanoparticle/hydrolyzed rice glutelin fibril emulsion gels for encapsulation of curcumin.

The potential of using emulsion gels stabilized by binary plant protein nanoparticle mixtures for the encapsulation and delivery of lipophilic nutraceuticals was evaluated. The particle characteristics, physical stability, water diffusivity, microrheology, large amplitude oscillating shear (LAOS) properties, and in vitro digestion of emulsion gels prepared by different ratios of hydrolyzed rice glutelin fibrils (HRGFs) and pea protein nanoparticle (PNP) were characterized. The emulsion gel with P/H = 2:1 (0.84 µm) exhibited the best storage stability and freeze-thaw stability, as seen by the smaller oil droplet size (1.02 and 1.42 µm, respectively). Low-field pulsed NMR indicated that the majority of water in samples was highly mobile. All the samples were predominantly elastic-like materials. The P/H 2:1 emulsion gel had the lowest FI value (6.21 × 10-4 Hz), the highest MVI value (5.57 s/nm2), G'/ G″ values and enclosed area, showing that it had denser 3D network structures, higher stiffness values, and a high sensitivity to changes in strain. Additionally, P/H 2:1 emulsion gel had a relatively high lipid digestibility (96.1 %), curcumin bioaccessibility (58.9 %), and curcumin stability (94.2 %). This study showed that emulsion gels stabilized by binary protein nanoparticle mixtures (PNP/HRGF) have potential as edible delivery systems for lipophilic nutraceuticals.

Advancing Tissue Culture with Light-Driven 3D-Printed Microfluidic Devices.

Three-dimensional (3D) printing presents a compelling alternative for fabricating microfluidic devices, circumventing certain limitations associated with traditional soft lithography methods. Microfluidics play a crucial role in the biomedical sciences, particularly in the creation of tissue spheroids and pharmaceutical research. Among the various 3D printing techniques, light-driven methods such as stereolithography (SLA), digital light processing (DLP), and photopolymer inkjet printing have gained prominence in microfluidics due to their rapid prototyping capabilities, high-resolution printing, and low processing temperatures. This review offers a comprehensive overview of light-driven 3D printing techniques used in the fabrication of advanced microfluidic devices. It explores biomedical applications for 3D-printed microfluidics and provides insights into their potential impact and functionality within the biomedical field. We further summarize three light-driven 3D printing strategies for producing biomedical microfluidic systems: direct construction of microfluidic devices for cell culture, PDMS-based microfluidic devices for tissue engineering, and a modular SLA-printed microfluidic chip to co-culture and monitor cells.

Association between circulating levels of unsaturated fatty acids and risk for prediabetes in the NHANES 2003-2004 and 2011-2012.

AIMS: This study aimed to investigate the association between serum levels of common and uncommon unsaturated fatty acids and prediabetes risk. METHODS: Data were collected from the National Health and Nutrition Examination Survey for 2003-2004 and 2011-2012. Weighted proportional and multivariate logistic regression analyses were performed to assess the association of serum PUFAs and MUFAs with prediabetes risk after adjusting for potential confounders. RESULTS: A total of 3575 individuals were enrolled in this study. Serum levels of PUFAs EPA (20:5 n3) and GLA (18:3 n6) were associated with increased prediabetes risk (EPA (20:5 n3): OR = 1.878, 95% CI: 1.177-2.996, Ptrend = 0.002; GLA (18:3 n6): 1.702, 95% CI: 1.140-2.541, Ptrend = 0.016). The MUFAs PA (16:1 n7) and EA (20:1 n9) were associated with the risk of prediabetes (OR in quintile5: PA (16:1 n7): 1.780, 95% CI: 1.056-3.001, Ptrend = 0.003; EA (20:1 n9): 0.587, 95% CI: 0.347-0.994, Ptrend = 0.010). Moreover, nonlinear analysis revealed that serum levels of EPA (20:5 n3) and EA (20:1 n-9) were nonlinearly associated with prediabetes risk. CONCLUSION: Some serum n-3 PUFAs are positively associated with prediabetes, several serum n-6 PUFAs are inversely associated with prediabetes. Regulating individual serum USFA levels may help prevent prediabetes, thereby providing evidence for clinical and nutritional practices.