Towards better predicting the settling velocity of film-shaped microplastics based on experiment and simulation data.

The properties of microplastics determine their settling velocities and affect the fates and migration pathways of microplastics. This paper has simulated the settling velocities of film-shaped microplastics, which are present in natural aquatic environments. The numerical results provided more data to fit the terminal settling velocities of film-shaped microplastics. Comparison between the particle definition and the equivalent spherical diameter confirmed that the particle definition is more suitable for film-shaped microplastics. In the transitional flow regime, CD decreases linearly with Re. As Re further increases, CD gradually converges at approximately 1.20. By integrating the experimental and simulated data, a new explicit formula for predicting the settling velocity of film-shaped microplastics has been presented with the optimal shape parameter f. The presented formula achieves better performance (MAPE = 6.6 %, RMSE = 16.8 %, and R2 = 0.99) than the existing formulas for settling velocity for film-shaped microplastics, closely rivaling that of the ensemble learning algorithm.

Polyp segmentation based on implicit edge-guided cross-layer fusion networks.

Polyps are abnormal tissue clumps growing primarily on the inner linings of the gastrointestinal tract. While such clumps are generally harmless, they can potentially evolve into pathological tumors, and thus require long-term observation and monitoring. Polyp segmentation in gastrointestinal endoscopy images is an important stage for polyp monitoring and subsequent treatment. However, this segmentation task faces multiple challenges: the low contrast of the polyp boundaries, the varied polyp appearance, and the co-occurrence of multiple polyps. So, in this paper, an implicit edge-guided cross-layer fusion network (IECFNet) is proposed for polyp segmentation. The codec pair is used to generate an initial saliency map, the implicit edge-enhanced context attention module aggregates the feature graph output from the encoding and decoding to generate the rough prediction, and the multi-scale feature reasoning module is used to generate final predictions. Polyp segmentation experiments have been conducted on five popular polyp image datasets (Kvasir, CVC-ClinicDB, ETIS, CVC-ColonDB, and CVC-300), and the experimental results show that the proposed method significantly outperforms a conventional method, especially with an accuracy margin of 7.9% on the ETIS dataset.

Purity Assessment of Tripropyl Phosphate through Mass Balance and 1H and 31P Quantitative Nuclear Magnetic Resonance.

Tripropyl phosphate (TnPP) is a commonly used organic phosphate flame retardant in the textiles, plastics, and coating industries. Residues are commonly detected in samples from the environment and food. The availability of certified reference materials (CRMs) is essential to ensure the accuracy and traceability of detection results. In this study, a comprehensive characterization of a CRM for TnPP was carried out, and its purity was evaluated using two distinct methodologies: mass balance (MB) and quantitative nuclear magnetic resonance spectroscopy (qNMR). In the MB method, the levels of structurally related organic impurities are 1.37 mg/g. The water content was determined to be 3.16 mg/g, while inorganic impurities were found to be 0.87 mg/g, and no residual organic solvents were detected. Benzoic acid and monocrotophos were chosen as internal standards for 1H-qNMR and 31P-qNMR, respectively. The purity of the TnPP CRM was assessed as 994.6 mg/g, 994.1 mg/g, and 993.5 mg/g using MB, 1H-qNMR, and 31P-qNMR techniques, respectively. The verified purity of the TnPP CRM was ultimately determined to be 994.1 mg/g, with an expanded uncertainty of 3.4 mg/g (k = 2), ensuring traceability to the International System of Units (SI). This CRM can be effectively utilized for preparing calibration solutions suitable for the routine monitoring of TnPP residues in plastics and food samples.

Research progress of photo-crosslink hydrogels in ophthalmology: A comprehensive review focus on the applications.

Hydrogel presents a three-dimensional polymer network with high water content. Over the past decade, hydrogel has developed from static material to intelligent material with controllable response. Various stimuli are involved in the formation of hydrogel network, among which photo-stimulation has attracted wide attention due to the advantages of controllable conditions, which has a good application prospect in the treatment of ophthalmic diseases. This paper reviews the application of photo-crosslink hydrogels in ophthalmology, focusing on the types of photo-crosslink hydrogels and their applications in ophthalmology, including drug delivery, tissue engineering and 3D printing. In addition, the limitations and future prospects of photo-crosslink hydrogels are also provided.

Knockdown of one cytochrome P450 gene CYP6DW4 increases the susceptibility of Bemisia tabaci to dimpropyridaz, a novel pyridazine pyrazolecarboxamide insecticide.

Bemisia tabaci is a formidable insect pest worldwide, and it exhibits significant resistance to various insecticides. Dimpropyridaz is a novel pyridazine pyrazolecarboxamide insecticide used against sucking insect pests, but there is little information regarding its metabolic detoxification in arthropods or cross-resistance with other insecticides. In this study, we found that dimpropyridaz shows no cross-resistance with three other popular insecticides, namely abamectin, cyantraniliprole, and flupyradifurone. After treatment of B. tabaci adults with a high dose of dimpropyridaz, higher cytochrome P450 monooxygenase (P450) activity was detected in the survivors, and the expression of the P450 gene CYP6DW4 was highly induced. Cloning and characterization of the full-length amino acid sequence of CYP6DW4 indicated that it contains conserved domains typical of P450 genes, phylogenetic analysis revealed that it was closely related to a B. tabaci protein, CYP6DW3, known to be involved in detoxification of imidacloprid. Silencing of CYP6DW4 by feeding insects with dsRNA significantly increased the susceptibility of B. tabaci to dimpropyridaz. In addition, homology modeling and molecular docking analyses showed the stable binding of dimpropyridaz to CYP6DW4, with binding free energy of -6.65 kcal/mol. Our findings indicate that CYP6DW4 plays an important role in detoxification of dimpropyridaz and possibly promotes development of resistance in B. tabaci.

Overexpression of CYP6CX4 contributing to field-evolved resistance to flupyradifurone, one novel butenolide insecticide, in Bemisia tabaci from China.

Bemisia tabaci is a formidable insect pest worldwide, and exhibits significant resistance to various insecticides. Flupyradifurone is one novel butenolide insecticide and has emerged as a new weapon against B. tabaci, but field-evolved resistance to this insecticide has become a widespread concern. To unravel the mechanisms of field-evolved flupyradifurone resistance, we conducted a comprehensive investigation into susceptibility of twenty-one field populations within the Beijing-Tianjin-Hebei Region of China. Alarmingly, thirteen of these populations displayed varying degrees of resistance, ranging from low to medium levels, and building upon our prior findings, we meticulously cloned and characterized the CYP6CX4 gene in B. tabaci. Our investigations unequivocally confirmed the association between CYP6CX4 overexpression and flupyradifurone resistance in three of the thirteen resistant strains via RNA interference. To further validate our findings, we introduced CYP6CX4 overexpression into a transgenic Drosophila melanogaster line, resulting in a significant development of resistance to flupyradifurone in D. melanogaster. Additionally, homology modeling and molecular docking analyses showed the stable binding of flupyradifurone to CYP6CX4, with binding free energy of -6.72 kcal mol-1. Collectively, our findings indicate that the induction of CYP6CX4 exerts one important role in detoxification of flupyradifurone, thereby promoting development of resistance in B. tabaci.

Fragmentation Pathway of Organophosphorus Flame Retardants by Liquid Chromatography-Orbitrap-Based High-Resolution Mass Spectrometry.

Organophosphorus flame retardants (OPFRs) have been widely used in polymeric materials owing to their flame retardant and plasticizing effects. Investigating the fragmentation pathway of OPFRs is of great necessity for further discovering and identifying novel pollutants using orbitrap-based high-resolution mass spectrometry (HRMS). A total of 25 OPFRs, including alkyl, halogenated, and aromatic types, were analyzed in this study. The fragmentation pathways of the OPFRs were investigated using orbitrap-based HRMS with high-energy collision dissociation (HCD) in positive mode. The major fragmentation pathways for the three types of OPFRs are greatly affected by the substituents. In detail, the alkyl and halogenated OPFRs underwent three McLafferty hydrogen rearrangements, wherein the substituents were gradually cleaved to form the structurally stable [H4PO4]+ (m/z = 98.9845) ions. In contrast, the aromatic OPFRs would cleave not only the C-O bond but also the P-O bond, depending on the substituents, to form fragment ions such as [C6H7O]+ (m/z = 95.0495) or [C7H7]+ (m/z = 91.0530), among others. Using HRMS improved the accuracy of fragment ion identification, and the pathway became more evident. These fragmentation laws can provide identification information in pollutant screening work and theoretical references for the structural characterization of compounds with diverse substituent structures.

Determination of multi-mycotoxins in vegetable oil via liquid chromatography-high resolution mass spectrometry assisted by a complementary liquid-liquid extraction.

The simultaneous determination of multi-mycotoxins in food commodities are highly desirable due to their potential toxic effects and mass consumption of foods. Herein, liquid chromatography-quadrupole exactive orbitrap mass spectrometry was proposed to analyze multi-mycotoxins in commercial vegetable oils. Specifically, the method featured a successive liquid-liquid extraction process, in which the complementary solvents consisted of acetonitrile and water were optimized. Resultantly, matrix effects were reduced greatly. External calibration approach revealed good quantification property for each analyte. Under optimal conditions, the recovery ranging from 80.8% to 109.7%, relative standard deviation less than 11.7%, and good limit of quantification (0.35 to 45.4 ng/g) were achieved. The high accuracy of proposed method was also validated. The detection of 20 commercial vegetable oils revealed that aflatoxins B1 and B2, zearalenone were observed in 10 real samples. The as-developed method is simple and low-cost, which merits the wide applications for scanning mycotoxins in oil matrices.

[Screening of organophosphorus flame retardant residues in rice by QuEChERS-gas chromatography-quadrupole time-of-flight mass spectrometry].

Organophosphorus flame retardants (OPFRs) have emerged as good alternatives to brominated flame retardants, the use of which is globally restricted. In this study, a screening method based on QuEChERS-gas chromatography-quadrupole time-of-flight mass spectrometry (GC-Q-TOF/MS) was established for the determination of 21 OPFRs in rice. First, full scan (scanning range, m/z 50-450) was performed with a mixed standard solution of the 21 OPFRs (0.1 µg/g) by GC-Q-TOF/MS. The fragmentation pathways of these OPFRs were then investigated to explore their cleavage fragments, the interrelationships among fragments, and the possible cleavage modes of alkylated, chlorinated, and aromatic OPFRs. The retention times, isotopic abundance ratios, and molecular formulas of the characteristic fragments as well as the exact mass of the compounds were obtained to establish a mass spectral library of the OPFRs. Rice samples were extracted and purified by the QuEChERS method, and 0.5% formate acetonitrile solution was used as the extraction solvent; 4 g of magnesium sulfate, 1 g of sodium chloride, 0.5 g of disodium hydrogen citrate, and 1 g of sodium citrate as the extraction-salt combination; and 50 mg of primary secondary amine (PSA), 50 mg of octadecylsilane (C18), and 150 mg of magnesium sulfate as the purification materials. The chromatographic separation of the 21 OPFRs was completed within 16 min under optimized temperature program conditions on the DB-5MS UI column. The screening parameters were optimized, and a full scan of the samples was performed under the following conditions: number of characteristic fragment ions ≥2; accurate mass window=±2×10-5 (±20 ppm); retention time deviation=±0.2 min, and ion abundance deviation<20%. The developed method was applied to the screening 21 OPFRs in the samples. The results indicated that the matrix interference was greatly reduced by decreasing the extraction accurate mass window, thereby improving the signal-to-noise ratio of the analytes. The targets were extracted from the matrix interference and background noise using deconvolution software, which improved the match between the target compounds and the mass spectral library. The detection rates of alkyl and aromatic OPFRs increased by 22% and 25%, respectively, when the spiking level was increased from 2 to 10 ng/g. Among the chlorinated OPFRs, only tris(2-chloroisopropyl) phosphate (TCIPP) was not detected at a spiking level of 2 ng/g, indicating that chlorinated OPFRs could be identified even at low concentrations. The characteristic ions of the detected compounds matched those of the home-made mass spectral library well, indicating that the practical application of the home-made mass spectral library. The established screening method was applied in the determination of OPFRs in rice samples from different regions in China. A total of 11 OPFRs were detected, among which trimethyl phosphate (TMP), tri-iso-butyl phosphate (TiBP), and tris(3,5-dimethylphenyl) phosphate (T35DMPP) had the highest detection rates. These results indicate that these three OPFRs are widely used and can easily come into contact with rice samples through various routes. Differences in the types of OPFRs detected in the actual samples may be related to the types of OPFRs produced in local factories. OPFRs can be detected in rice samples by the developed GC-Q-TOF/MS screening method, which is helpful for the identification of OPFRs in complex matrix samples.

Settling processes of cylindrical microplastics in quiescent water: A fully resolved numerical simulation study.

The settling process of marine microplastics (MPs) is crucial research concerning the transport and movement of MPs. The settling processes of MP fibers that possess a cylindrical geometry are affected by environmental factors and properties. In this study, a three-dimensional numerical model for the still water settling of MPs with complex shapes was constructed using the lattice Boltzmann method (LBM) and the immersed boundary method (IBM). The fully resolved settling simulation of cylindrical MPs was achieved, and the model results demonstrated good agreement with the semi-empirical settling velocity formulas. Based on the simulation results, the critical aspect ratio of the cylindrical MP was found to be between 0.93 and 0.94. Near this critical aspect ratio, there is a decline in the drag force. Additionally, it was found that the angular displacement and aspect ratio influence horizontal movement but not the vertical settling velocity, while the density only affects vertical movement.

Development of a solubility parameter calculation-based method as a complementary tool to traditional techniques for indoor dust microplastic determination and risk assessment.

Herein, a method based on solubility parameter calculation was first used to analyze microplastics in indoor dust. The limit of quantification (LOQ) reached 0.2 mg/g, and the result of reference material SRM 2585 (n = 3) was 14.8 mg/g ± 1.8 %, suggesting satisfying sensitivity and precision. Recoveries of spiking experiments were > 80 % with no obvious matrix interferences observed, except ethylene propylene diene monomer (EPDM) MPs. Further, 69 indoor dust samples were analyzed to verify the method and to assess exposure scenarios for graduate students in Tianjin, China. EPDM was identified in an indoor environment for the first time as the second most widely detected type after PET in this work. The mass-based result is complementary to the outcomes from thermogravimetric analysis-gas chromatography-mass spectrometry and laser direct infrared imaging. Significant correlations were found between total organic carbon (TOC), microplastics, and BDE-209 concentrations, indicating microplastics important contaminant vectors in indoor dust. Dormitory stays and PET contributed the most to health risks among the three exposure scenarios and detected four polymers, respectively. This work provides an approach with the potential for the standardized determination of microplastics in complex environmental matrices and reveals exposure characteristics of indoor dust microplastics.

Synthesis of dendritic cobalt with flower-like structure by a facile wet chemistry method as an excellent electromagnetic wave absorber.

In this study, a three-dimensional (3D) floral dendritic cobalt (FDC) consisting of layered flakes was effectively synthesized using a facile wet chemistry method. The impact of the molar amount of NaOH on the microscopic morphology, magnetic characteristics, and electromagnetic wave (EMW) absorption properties of the FDC magnetic materials was comprehensively investigated. The results revealed that the prepared FDC features primary, secondary, and multi-level branches, with the majority of secondary branches being parallel to one another. The dendrites grew closely towards the flower's center at one end, while the tips extend in various directions, forming a dendritic flower cluster. The optimal reflection loss (RL) of S3 at 9.3 GHz was -56.34 dB with a thickness of 1.89 mm, and the maximum effective absorption bandwidth (EAB, RL < -10 dB) reached 6.0 GHz (12.0-18.0 GHz) at a thickness of 1.30 mm. Consequently, the FDC magnetic materials produced in this study presented a method for fabricating high-performance electromagnetic wave absorption (EMWA) materials.

Functional differentiation of two general-odorant binding proteins in Hyphantria cunea (Drury) (Lepidoptera: Erebidae).

BACKGROUND: General odor-binding proteins (GOBPs) play critical roles in insect olfactory recognition of sex pheromones and plant volatiles. Therefore, the identification of GOBPs in Hyphantria cunea (Drury) based on their characterization to pheromone components and plant volatiles is remain unknown. RESULTS: In this study, two H. cunea (HcunGOBPs) genes were cloned, and their expression profiles and odorant binding characteristics were systematically analyzed. Firstly, the tissue expression study showed that both HcunGOBP1 and HcunGOBP2 were highly expressed in the antennae of both sexes, indicating their potential involvement in the perception of sex pheromones. Secondly, these two HcunGOBPs genes were expressed in Escherichia coli and ligand binding assays were used to assess the binding affinities to its sex pheromone components including two aldehydes and two epoxides, and some plant volatiles. HcunGOBP2 showed high binding affinities to two aldehyde components (Z9, Z12, Z15-18Ald and Z9, Z12-18Ald), and showed low binding affinities to two epoxide components (1, Z3, Z6-9S, 10R-epoxy-21Hy and Z3, Z6-9S, 10R-epoxy-21Hy), whereas HcunGOBP1 showed weak but significant binding to all four sex pheromone components. Furthermore, both HcunGOBPs demonstrated variable binding affinities to the plant volatiles tested. Thirdly, in silico studies of HcunGOBPs utilized homology, structure modeling, and molecular docking revealed critical hydrophobic residues might be involved in the binding of HcunGOBPs to their sex pheromone components and plant volatiles. CONCLUSION: Our study suggests that these two HcunGOBPs may serve as potential targets for future studies of HcunGOBPs ligand binding, providing insight in the mechanism of olfaction in H. cunea. © 2023 Society of Chemical Industry.

Toxicity, baseline of susceptibility, detoxifying mechanism and sublethal effects of chlorogenic acid, a potential botanical insecticide, on Bemisia tabaci.

Bemisia tabaci is a threat to agriculture worldwide because of its potential to cause devastating damage to crops. Chlorogenic acid is a bioactive pesticidal phytochemical agent against various insect pests. We here determined the susceptibility of a laboratory strain of B. tabaci to chlorogenic acid and other popular insecticides, and the susceptibility of several field-collected populations to chlorogenic acid. Also, cross-resistance to four common insecticides was measured. Chlorogenic acid had the highest toxicity of all tested insecticides, and all the field-collected populations were susceptible to chlorogenic acid, and little cross-resistance was detected between chlorogenic acid and the other tested insecticides. Furthermore, analysis of enzyme activities and expression of P450 genes in B. tabaci after treatment with LC50 of chlorogenic acid suggested that enhanced P450 activity could be involved in chlorogenic acid detoxification. We subsequently evaluated sublethal effects of chlorogenic acid, and found that treatment with LC25 of chlorogenic acid prolonged duration of two developmental stages, reduced fecundity, and decreased survival rates of treated B. tabaci compared to untreated insects. Overall, these findings demonstrate strong toxicity and significant sublethal effects of chlorogenic acid on B. tabaci, and suggest that overexpression of P450 genes may be associated with chlorogenic acid detoxification.

Baseline Susceptibility, Cross-Resistance, and Sublethal Effects of Broflanilide, a Novel Meta-Diamide Pesticide, in Spodoptera litura.

Spodoptera litura is a damaging and notorious insect pest of agricultural crops that has developed resistance to various insecticides. Broflanilide is a novel pesticide with a unique mode of action that displays high efficiency against lepidopterous larvae. We here determined the baseline susceptibility of a laboratory strain of S. litura to broflanilide and 10 other popular insecticides. Furthermore, we measured susceptibility and cross-resistance using three common insecticides in 11 field-collected S. litura populations. Broflanilide caused the highest toxicity among all tested insecticides, with the laboratory strain and all field-collected populations showing high susceptibility. Moreover, no cross-resistance was detected between broflanilide and the other tested insecticides. We subsequently evaluated the sublethal effects of broflanilide and found that treatment with the 25% lethal concentration (LC25) prolonged the development duration in the larvae, reduced the pupation rate and pupae weight, and decreased egg hatchability. Finally, the activities of three detoxifying enzymes were measured in S. litura after treatment with the LC25 dose. The results suggested that enhanced cytochrome P450 monooxygenase (P450) activity could be involved in broflanilide detoxification. Overall, these findings demonstrate the strong toxicity and significant sublethal effects of broflanilide in S. litura and suggest that increased P450 activity may be associated with broflanilide detoxification.

Simultaneous Determination of Neonicotinoid and Carbamate Pesticides in Freeze-Dried Cabbage by Modified QuEChERS and Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry.

Dehydrated vegetables are popular in instant foods, but few reports have focused on their pesticide residues. This research developed and validated a modified QuEChERS method combined with ultra-performance liquid chromatography-tandem mass spectrometry to determine 19 kinds of neonicotinoid and carbamate pesticides in freeze-dried cabbage. Herein, acetonitrile/water (v/v = 2:1) was selected in the extraction step. Meanwhile, 4 g anhydrous magnesium sulfate and 1 g sodium chloride were applied to the partitioning step. Dispersive solid-phase extraction sorbents were selected, and liquid chromatography conditions were further optimized for dealing with the matrix effect. The limits of quantification ranged from 1.0 to 10.0 µg/kg. The validation results were acceptable, with average recoveries of 78.7-114.0% and relative standard deviations below 14.2%. The method recoveries were closely related to the volume proportion of water in the extractant. Finally, the developed method was applied to real freeze-dried cabbages and four pesticides (propamocarb, imidacloprid, acetamiprid, and thiacloprid) were detected in six samples.

Flavonoid-producing tomato plants have a direct negative effect on the zoophytophagous biological control agent Orius sauteri.

Orius sauteri (Poppius) (Hemiptera: Anthocoridae) is often used for biological control of small arthropod pests in greenhouse vegetable production systems in Asia. In addition to feeding on arthropod prey, O. sauteri consumes small quantities of plant material. Previous studies demonstrated that tomato plant chemistry confers antixenosis resistance to phloem-feeding whiteflies, but the potential nontarget effects of phytochemicals on the beneficial predator O. sauteri are unknown. Comparison of O. sauteri confined to near-isogenic lines (NILs) of tomatoes producing high levels of flavonoids (NIL-purple hypocotyl; resistant to whiteflies) and low levels of flavonoids (NIL-green hypocotyl; susceptible to whiteflies) revealed that O. sauteri had reduced oviposition, nymphal survival, and development on resistant plants, even if they were also provided with prey that did not feed on the host plant. Moreover, O. sauteri showed a significant ovipositional preference in choice assays, laying significantly more eggs on susceptible than on resistant plants. Molecular gut content analysis using the specific chloroplast trnL gene from tomato confirmed that adult and immature O. sauteri feed on both resistant and susceptible genotypes, and feeding behavior assays revealed that resistance did not affect plant feeding or prey acceptance by O. sauteri adults. These results demonstrate a direct negative effect of phytochemicals on a nontarget beneficial species and indicate that resistance mediated by phytochemicals can affect organisms that do not solely feed on phloem sap. The results also indicate that the mode of action and the potential ecological effects of phytochemical-mediated resistance are broader than previously recognized.

Chlorantraniliprole in foods: Determination, dissipation and decontamination.

Chlorantraniliprole (CAP) is the first commercially available anthranilic diamide insecticide that targets ryanodine receptors. However, excessive use of CAP can lead to persistent contamination on treated foods and adverse effects on human wellness. The current review focuses on CAP residue analysis in foods by using chromatographic techniques. QuEChERS (quick, easy, cheap, effective, rugged and safe) is the most widely used sample preparation strategy and liquid chromatography tandem mass spectrometry is the predominant analytical method for various food matrices including vegetable, fruit, grain, fish and so on. Moreover, this review summarizes the dissipation pattern of CAP on foods and found it usually dissipates fast on plant in open-field environment. For decontamination, common culinary cleaning methods could effectively remove CAP from vegetables. Finally, some new directions are proposed for better advancement.

Knockdown of TRPV gene Nanchung decreases resistance to the novel pyropene insecticide, afidopyropen, in Bemisia tabaci.

Insect TRPV is one subfamily of transient receptor potential (TRP) channels, and it is composed of Inactive (Iav) and Nanchung (Nan), the molecular targets of afidopyropen in several sucking insect pests. In this study, we performed successive selection and synergism tests based on previous work. The resistant afidopyropen strain HD-Afi of Bemisia tabaci reached about 86-fold resistance to afidopyropen, and only part of the resistance resulted from detoxification of cytochrome P450 monooxygenases. Then, we cloned and characterized Nan and Iav from B. tabaci (BtNan and BtIav), and found that they were expressed in all stages of development and tissues of adult, and the expression level of BtNan in strains of HD-S and HD-Afi were significantly increased after afidopyropen treatment. Further, expression of BtNan was downregulated after gene silencing, and it resulted in significantly decreased afidopyropen resistance in the strain of HD-Afi. Our data revealed the first evidence that overexpression of the TRPV Nan gene is responsible for causing afidopyropen resistance in B. tabaci, and our results could provide new visions on the function of TRPVs in the development of resistance to pesticide and supply evidence for developing novel strategies of pest management.

Stability Evaluation of Aflatoxin B1 Solution Certified Reference Material via Ultra-High Performance Liquid Chromatography Coupled with High-Resolution Mass Spectrometry.

Aflatoxin B1 (AFB1) solution certified reference materials (CRMs) have been widely utilized in the measurements of AFB1 contaminations in foods and agricultural products. It is of great importance to evaluate the stability of AFB1 solution CRMs in different matrices for their practical applications. In this study, the stability of AFB1 solution CRM was investigated and its degradation products under various conditions were elucidated using ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry for the first time. Exposure to high temperatures and UV light irradiation accelerated the degradation of AFB1 solution significantly, and the degradation products were largely dependent on the solvents. Two degradation pathways were proposed based on the degradation products. The addition reaction, oxidation reaction, and modification of the methoxy group are the major processes involved in the degradation of the AFB1 solution. The results of this study indicate that the property value of the acetonitrile solution of AFB1 can be well retained when it is stored at temperatures lower than 60 °C, and the exposure to UV light irradiation is avoided.