RESUMO
BACKGROUND: Numerous studies have established the presence of gray matter atrophy and brain activation abnormalities during neurocognitive and social cognitive tasks in schizophrenia. Despite a growing consensus that diseases localize better to distributed brain networks than individual anatomical regions, there is still a dearth of literature examining brain network localization of gray matter atrophy, neurocognitive and social cognitive dysfunction in schizophrenia. METHODS: To address this gap, we initially identified brain locations of structural and functional abnormalities in schizophrenia from 301 published neuroimaging studies with 8712 schizophrenia individuals and 9275 healthy controls. By applying novel functional connectivity network mapping to large-scale resting-state functional magnetic resonance imaging datasets, we mapped these affected brain locations to 3 brain abnormality networks of schizophrenia. RESULTS: The gray matter atrophy network of schizophrenia comprised a broadly distributed set of brain areas predominantly implicating the ventral attention, somatomotor, and default networks. The neurocognitive dysfunction network was also composed of widespread brain areas primarily involving the frontoparietal and default networks. By contrast, the social cognitive dysfunction network consisted of circumscribed brain regions mainly implicating the default, subcortical, and visual networks. CONCLUSIONS: Our findings suggest shared and unique brain network substrates of gray matter atrophy, neurocognitive and social cognitive dysfunction in schizophrenia, which may not only refine the understanding of disease neuropathology from a network perspective, but also potentially contribute to more targeted and effective treatments for impairments in different cognitive domains in schizophrenia.
RESUMO
SO3 is an important reactive species in sulfur cycle and sulfuric acid formation processes and its reactions with some functional group substances, such as H2O, NH3, CH3OH, and organic and inorganic acids, have been extensively studied. However, its loss mechanism with multifunctional species is still lacking in detail. Herein, the reaction mechanism between SO3 and monoethanolamide (MEA) was investigated in the gas phase and on water droplets. The quantum chemical calculations indicate that the gas-phase reactions of SO3 with the OH and NH2 moieties of MEA hardly occur as their reaction energy barriers are up to 21.9-29.4 kcal mol-1. When a single water molecule is added into the SO3 + MEA reaction, it not only decreases the reaction barrier by at least 15.0 kcal mol-1 and thus enhances the rate obviously, but can also lead to the main product changing from HOCH2CH2NHSO3H to NH2CH2CH2OSO3H. The Born Oppenheimer molecular dynamics simulations on a water droplet show that the routes of the NH2CH2CH2OSO3-â¯H3O+ ion pair, HSO4- and HOCH2CH2NH3+ ions and zwitterionic formations of HOCH2CH2NH2+-SO3- and SO3--OCH2CH2NH3+ occur through a loop-structure route or chain reaction process, and can be finished within several picoseconds. Interestingly, the nucleation simulations show that the products of HOCH2CH2NHSO3H and NH2CH2CH2OSO3H have a potential ability to participate in the formation of new particles as they can form larger clusters with H2SO4, NH3 and H2O molecules within 20 ns. Thus, the present study will not only give new insight into the reaction between SO3 and multifunctional compounds, but also provide a new potential formation mechanism for particles resulting from the loss of SO3.
RESUMO
NiFe-based nanomaterials are extensively studied as one of the promising candidates for the oxygen evolution reaction (OER). However, their practical application is still largely impeded by the unsatisfied activity and poor durability caused by the severe leaching of active species. Herein, a rapid and facile combustion method is developed to synthesize the vertical graphene (VG) supported N-doped carbon modified (NixFe1-x)Se composites (NC@(NixFe1-x)Se/VG). The interconnected heterostructure of obtained materials plays a vital role in boosting the catalytic performance, offering rich active sites and convenient pathways for rapid electron and ion transport. The incorporation of Se into NiFe facilitates the formation of active species via in situ surface reconstruction. According to density functional theory (DFT) calculations, the in situ formation of a Ni0.75Fe0.25Se/Ni0.75Fe0.25OOH layer significantly enhances the catalytic activity of NC@(NixFe1-x)Se/VG. Furthermore, the surface-adsorbed selenoxide species contribute to the stabilization of the catalytic active phase and increase the overall stability. The obtained NC@(NixFe1-x)Se/VG exhibits a low overpotential of 220 mV at 20 mA cm-2 and long-term stability over 300 h. This work offers a novel perspective on the design and fabrication of OER electrocatalysts with high activity and stability.
RESUMO
Cryptococcal meningitis (CM), a common and serious opportunistic infection mostly caused by Cryptococcus neoformans, is primarily treated with fluconazole. Nevertheless, Cryptococcus neoformans strains that undergo repeated exposure to azoles can gradually acquire heteroresistance to fluconazole. The management of this specific CM infection poses a substantial challenge. Determining a globally accepted definition for fluconazole heteroresistance and developing effective and prompt methods for identifying heteroresistance is of utmost importance. We collected data on the clinical and epidemiological characteristics of patients diagnosed with CM. All the available Cryptococcus neoformans strains isolated from these patients were collected and subjected to antifungal susceptibility testing and evaluation of fluconazole heteroresistance. AIDS was present in 40.5% of the patients, whereas 24.1% did not have any underlying diseases. Patients with chronic diseases or impaired immune systems are susceptible to infection by Cryptococcus neoformans, a fungus that frequently (39.6%, 19/48) shows heteroresistance to fluconazole, as confirmed by population analysis profile (PAP).IMPORTANCEFluconazole heteroresistance poses a significant threat to the efficacy of fluconazole in treating cryptococcal meningitis (CM). Unfortunately, the standard broth microdilution method often misses the subtle percentages of subpopulations exhibiting heteroresistance. While the population analysis profile (PAP) method is esteemed as the gold standard, its time-consuming and labor-intensive nature makes it impractical for routine clinical use. In contrast, the Kirby-Bauer (KB) disk diffusion method offers a simple and effective screening solution. Our study highlights the value of KB over PAP and minimum inhibitory concentration (MIC) by demonstrating that when adjusting the inoculum concentration to 1.0 McFarland and subjecting samples to a 72-hour incubation period at 35°C, the KB method closely mirrors the outcomes of the PAP approach in detecting fluconazole heteroresistance. This optimization of the KB method not only enhances assay efficiency but also provides a blueprint for developing a timely and effective strategy for identifying heteroresistance.
Assuntos
Antifúngicos , Cryptococcus neoformans , Farmacorresistência Fúngica , Fluconazol , Hospitais de Ensino , Meningite Criptocócica , Testes de Sensibilidade Microbiana , Cryptococcus neoformans/efeitos dos fármacos , Cryptococcus neoformans/isolamento & purificação , Cryptococcus neoformans/genética , Meningite Criptocócica/microbiologia , Meningite Criptocócica/tratamento farmacológico , Meningite Criptocócica/epidemiologia , Fluconazol/farmacologia , Humanos , Antifúngicos/farmacologia , China/epidemiologia , Adulto , Feminino , Masculino , Pessoa de Meia-Idade , Idoso , Adulto Jovem , AdolescenteRESUMO
Online measurement of disk part dimensions by the standard industrial camera features low cost, high efficiency and good universality, but the impact of projection distortion and end face chamfer on measurement is needed to overcome. Present work presents a measurement method to resolve above issues based on machine vision. To improve the measurement accuracy, lower end face of a disk part is determined as calibration plane and the upper end face is measurement plane. To reduce the impact of projection distortion and chamfer on measurement, the measurement points are reconstructed on the measurement plane by re-projection. Then, the inner and outer diameters of disk parts are measured by circle geometric fitting, and the thickness is calculated by the measurement plane position. The experimental results show that the method can online measure disk part dimensions just by a single image, and accuracy meets the requirements of universal grade disk parts.
Assuntos
Processamento de Imagem Assistida por Computador , Processamento de Imagem Assistida por Computador/métodos , Algoritmos , Humanos , CalibragemRESUMO
Surface plasmon driven photocatalytic reactions have great potential for information encryption as well as information security. In this paper, explored the detection concentrations of dye molecule Rhodamine6G (R6G) on three substrates, where complete original Raman spectra signals were still obtained at a concentration of 10-8 M. Utilized photosensitive molecules to investigate the photocatalytic characteristics of 4-nitrobenzenethiol (4-NBT) on three substrates. Excitation light at a wavelength of 633 nm enables local photocatalytic for information signals writing, while 785 nm wavelength excitation light combined with two-dimensional Mapping technology is used for information signal reading. Read information signals are often prone to reading errors due to their own lack of resolution or strong interference from back bottom signals, so error correction processing of information signals is essential. Through comparative exploration, it is found that the ratio method can obtain high-precision and high-resolution information signals, and the interference of the background signals were well suppressed. Leveraging the advantages of Raman fingerprint spectra at the micro/nanoscale, it solves the challenge of incomplete information signals presentation at smaller scales. Additionally, through error correction processing of the information signals, high precision and high-resolution information signals are obtained.
RESUMO
Uncontrollable growth of Zn dendrites, irreversible dissolution of cathode material and solidification of aqueous electrolyte at low temperatures severely restrict the development of aqueous Zn-ion batteries. In this work, 2,2,2-trifluoroethanol (TFEA) with a volume fraction of 50% as a highly compatible polar-solvent is introduced to 1.3 M Zn(CF3SO3)2 aqueous electrolyte, achieving stable high-performance Zn-ion batteries. Massive theoretical calculations and characterization analysis demonstrate that TFEA weakens the tip effect of Zn anode and restrains the growth of Zn dendrites due to electrostatic adsorption and coordinate with H2O to disrupt the hydrogen bonding network in water. Furthermore, TFEA increases the wettability of the cathode and alleviates the dissolution of V2O5, thus improving the capacity of the full battery. Based on those positive effects of TFEA on Zn anode, V2O5 cathode, and aqueous electrolyte, the Zn//Zn symmetric cell delivers a long cycle-life of 782 h at 5 mA cm-2 and 2 mA h cm-2. The full battery still declares an initial capacity of 116.78 mA h g-1, and persists 87.73% capacity in 2000 cycles at -25 °C. This work presents an effective strategy for fully compatible co-solvent to promote the stability of Zn anode, V2O5 cathode and aqueous electrolyte for high-performance Zn-ion batteries.
RESUMO
Goos-Hänchen shift of total internal reflection (TIR) is the light beam movement without external driving, so envisioned to have potential manipulation of optical beams. In this article, with a silicon-on-insulator (SOI) waveguide corner structure, a variable equivalent permittivity of guided wave is modelled, and then the equivalent electric polarizabilities and the Goos-Hänchen shift of guided wave are modelled. Consequently, with a 2.0-µm SOI waveguide corner structure and an abrupt phase change of â¼0.5π caused by a vertically inserted metasurface of nanoscale semi-spheres having a 450-nm radius can reach the GH shifts of 2.1â µm for TE- and TM-mode, respectively, which are verified by both the FDTD simulation results of 1.93â µm with a reflectivity of about 62% and the experimental results of 2.0â µm with â¼60%. Therefore, this work has efficiently modelled the optical feature response of semi-sphere metasurface to guided wave and the active manipulation for the GH shifts of guided-wave, opening more opportunities to develop the new functionalities and devices for Si-based photonic integrated circuit (PIC) applications.
RESUMO
High-performance lithium metal anodes are crucial for the development of advanced Li metal batteries. Herein, this work reports a novel plasma coupled electrolyte additive strategy to prepare high-quality composite solid electrolyte interphase (SEI) on Li metal to achieve enhanced performance and stability. With the guidance of calculations, this work selects diethyl dibromomalonate (DB) as an additive to optimize the solvation structure of electrolytes to modify the SEI. Meanwhile, this work groundbreakingly develops DB plasma technology coupled with DB electrolyte additive to construct a combinatorial SEI: inner plasma-induced SEI layer composed of LiBr and Li2CO3 plus additive-reduced SEI containing LiBr/Li2CO3/organic lithium compounds as an outer compatible layer. The optimized hybrid SEI has strong affinity toward Li+ and good mechanical properties, thereby inducing horizontal dispersion and uniform deposition of Li+ and keep structure stable. Accordingly, the symmetrical cells exhibit enhanced cycling stability for 1200 h at an overpotential of 23.8 mV with average coulombic efficiency (99.51%). Additionally, the full cells with LiNi0.8Co0.1Mn0.1O2 cathode deliver a capacity retention of 81.7% after 300 cycles at 0.5 C, and the pouch cell achieves a volumetric specific energy of ≈664 Wh Lâ1. This work provides new enlightenment on plasma technology for fabrication of advanced metal anodes for energy storage.
RESUMO
Environmental changes induced by urbanization may significantly alter plant survival strategies, thereby introducing uncertainties in their ability to withstand extreme heat. This study, centered on Jinhua City, distinguished urban, suburban, and rural areas to represent the various intensities of urbanization. It examined the leaf function properties of evergreen and deciduous trees common in these regions, focusing on leaf and branch characteristics. Employing an analysis of variance (ANOVA), principal component analysis (PCA), and path analysis (PA) of the plant functional traits and the climatic factors of each region, this study assessed the impact of urbanization on plant survival strategies. By tracking changes in plant functional traits from June to August, it explored the capacity of plants to acclimate to urban-warming-related heat stress across different urbanization gradients. The findings revealed that leaf thickness (LT) and stomatal size (SS) initially decreased and then increased, whereas specific leaf area (SLA) and leaf tissue density (LTD) first rose and then declined, from rural to urban regions. From June to August, branch wood density (WD), chlorophyll (Chl) content, LTD, and leaf dry matter content (LDMC) increased, whereas SLA and leaf water content (LWC) diminished, in all regions. PCA suggested that there was no significant change in the resource allocation strategy of plants (p > 0.05), with drought tolerance significantly reduced in the suburbs on the gradient of urbanization (p < 0.05). During the summer, with high temperature, plants were predominantly biased towards slow-return, conservative strategies, particularly among evergreen species. Compared to precipitation, PA revealed a significant urban warming effect. During summer, temperature was the main factor influencing resource investment strategy and drought resistance, with a notably stronger impact on the former. The high temperature in summer promoted a conservative survival strategy in plants, and the urbanization effect increased their tolerance to high temperatures.
RESUMO
As a facile substitute for the invasive technique of blood testing, wearable electrochemical sensors exhibit high potential for the noninvasive and real-time monitoring of biomarkers in human sweat. However, owing to enzyme specificity, the simultaneous detection of multiple biomarkers by enzymatic analysis is challenging. Moreover, sweat accumulation under sensors causes sweat contamination, which hinders real-time biomarker detection from sweat. This study reports the design and fabrication of flexible wearable electrochemical sensors containing a composite comprising Au nanorods (AuNRs) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) for the nonenzymatic detection of levodopa (LD) and uric acid (UA) in sweat. Each sensor was integrated with a flexible three-electrode system and a microfluidic patch for sweat sampling. AuNRs immobilized by PEG-doped PEDOT:PSS showed excellent analytical performance for LD and UA at different potentials. Thus, the newly fabricated sensors could detect LD and UA over a broad detection range with high sensitivity and showed a low limit of detection for both species. On-body assessments confirmed the ability of these sensors to simultaneously detect LD and UA in real time. Therefore, this study could open new frontiers in the fabrication of wearable electrochemical sensors for the pharmacokinetic profile tracking of LD and gout management.
Assuntos
Compostos Bicíclicos Heterocíclicos com Pontes , Técnicas Eletroquímicas , Ouro , Levodopa , Polímeros , Poliestirenos , Suor , Ácido Úrico , Dispositivos Eletrônicos Vestíveis , Ácido Úrico/análise , Humanos , Levodopa/análise , Levodopa/sangue , Suor/química , Poliestirenos/química , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentação , Ouro/química , Compostos Bicíclicos Heterocíclicos com Pontes/química , Polímeros/química , Técnicas Biossensoriais/métodos , Técnicas Biossensoriais/instrumentação , Nanotubos/química , Limite de DetecçãoRESUMO
Ovarian cancer (OC) is one of the most common malignancies in women. Tripartite motif-containing protein 22 (TRIM22) plays an important role in the initiation and progression of malignant tumors. Similarly, the transcription factor 4 (TCF4) is an essential factor involved in the initiation and progression of many tumors. However, it is still unclear whether TRIM22 can affect TCF4 in OC. Therefore, this study aims to investigate the mechanism related to TRIM22 and TCF4 in OC. TRIM22 protein and mRNA levels were analyzed in samples from both clinical and cell lines. The effects of TRIM22 knockdown and overexpression on cell proliferation, colony formation, migration, invasion, and related biomarkers were evaluated. In addition, the role of ubiquitination-mediated degradation of TCF4 was investigated by qRT-PCR and Western blotting. The association between TRIM22 and TCF4 was evaluated by Western blotting, co-immunoprecipitation, proliferation, colony formation, invasion, migration, and related biomarkers. The results showed that the expression of TRIM22 was minimal in OC tissues. Furthermore, upregulation of TRIM22 significantly inhibited OC cell proliferation, colony formation, migration, and invasion. In addition, TRIM22 was observed to regulate the degradation of TCF4 through the ubiquitination pathway. TCF4 can reverse the effects of TRIM22 on proliferation, colony formation, migration, and invasion in OC cells. TRIM22-mediated ubiquitination of TCF4 at K48 is facilitated by the RING domain. Implications: In conclusion, ubiquitination of TCF4 protein in OC is regulated by TRIM22, which has the potential to limit the proliferation, migration, and invasion of OC.
RESUMO
The design and fabrication of a lithiophilic skeleton are highly important for constructing advanced Li metal anodes. In this work, a new lithiophilic skeleton is reported by planting metal sulfides (e.g., Ni3S2) on vertical graphene (VG) via a facile ultrafast Joule heating (UJH) method, which facilitates the homogeneous distribution of lithiophilic sites on carbon cloth (CC) supported VG substrate with firm bonding. Ni3S2 nanoparticles are homogeneously anchored on the optimized skeleton as CC/VG@Ni3S2, which ensures high conductivity and uniform deposition of Li metal with non-dendrites. By means of systematic electrochemical characterizations, the symmetric cells coupled with CC/VG@Ni3S2 deliver a steady long-term cycle within 14 mV overpotential for 1800 h (900 cycles) at 1 mA cm-2 and 1 mAh cm-2. Meanwhile, the designed CC/VG@Ni3S2-Li||LFP full cell shows notable electrochemical performance with a capacity retention of 92.44% at 0.5 C after 500 cycles and exceptional rate performance. This novel synthesis strategy for metal sulfides on hierarchical carbon-based materials sheds new light on the development of high-performance lithium metal batteries (LMBs).
RESUMO
PURPOSE OF REVIEW: In this review, we summarized published articles on the role of tripartite motif (TRIM) family members in the initiation and development of human malignancies. RECENT FINDINGS: The ubiquitin-proteasome system (UP-S) plays a critical role in cellular activities, and UP-S dysregulation contributes to tumorigenesis. One of the key regulators of the UP-S is the tripartite motif TRIM protein family, most of which are active E3 ubiquitin ligases. TRIM proteins are critical for the biological functions of cancer cells, including migration, invasion, metastasis, and therapy resistance. Therefore, it is important to understand how TRIM proteins function at the molecular level in cancer cells. SUMMARY: We provide a comprehensive and up-to-date overview about the role TRIMs play in cancer progression and therapy resistance. We propose TRIM family members as potential new markers and targets to overcome therapy failure.
Assuntos
Carcinogênese , Transformação Celular Neoplásica , Humanos , Proteínas com Motivo Tripartido , UbiquitinasRESUMO
The fabrication of antifouling zwitterionic polymer brushes represents a leading approach to mitigate nonspecific adhesion on the surfaces of medical devices. This investigation seeks to elucidate the correlation between the material composition and structural attributes of these polymer brushes in preventing protein adhesion. To achieve this goal, we modeled three different zwitterionic brushes, namely, carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and (2-(methacryloyloxy)ethyl)-phosphorylcholine (MPC). The simulations revealed that elevating the grafting density enhances the structural stability, hydration strength, and resistance to protein adhesion exhibited by the polymer brushes. PCBMA manifests a more robust hydration layer, while PMPC demonstrates the slightest interaction with proteins. In a comprehensive evaluation, PSBMA polymer brushes emerged as the best choice with superior stability, enhanced protein repulsion, and minimally induced protein deformation, resulting in effective resistance to nonspecific adhesion. The high-density SBMA polymer brushes significantly reduce the level of protein adhesion in AFM testing. In addition, we have pioneered the quantitative characterization of hydration repulsion in polymer brushes by analyzing the hydration repulsion characteristics at different materials and graft densities. In summary, our study provides a nuanced understanding of the material and structural determinants influencing the capacity of zwitterionic polymer brushes to thwart protein adhesion. Additionally, it presents a quantitative elucidation of hydration repulsion, contributing to the advancement and application of antifouling polymer brushes.
Assuntos
Polímeros , Proteínas , Polímeros/química , Fenômenos Físicos , Adsorção , Metacrilatos/químicaRESUMO
High-performance catheters are essential for interventional surgeries, requiring reliable anti-adhesive and lubricated surfaces. This article develops a strategy for constructing high-density sulfobetaine zwitterionic polymer brushes on the surface of catheters, utilizing dopamine and sodium alginate as the primary intermediate layers, where dopamine provides mussel-protein-like adhesion to anchor the polymer brushes to the catheter surface. Hydroxyl-rich sodium alginate increases the number of grafting sites and improves the grafting mass by more than 4 times. The developed high-density zwitterionic polymer brushes achieve long-lasting and effective lubricity (µ<0.0078) and are implanted in rabbits for four hours without bio-adhesion and thrombosis in the absence of anticoagulants such as heparin. Experiments and molecular dynamics simulations demonstrate that graft mass plays a decisive role in the lubricity and anti-adhesion of polymer brushes, and it is proposed to predict the anti-adhesion of polymer brushes by their lubricity to avoid costly and time-consuming bioassays during the development of amphoteric polymer brushes. A quantitative influence of hydration in the anti-adhesion properties of amphiphilic polymer brushes is also revealed. Thus, this study provides a new approach to safe, long-lasting lubrication and anticoagulant surface modification for medical devices in contact with blood. STATEMENT OF SIGNIFICANCE: High friction and bioadhesion on medical device surfaces can pose a significant risk to patients. In response, we have developed a safer, simpler, and more application-specific surface modification strategy that addresses both the lubrication and anti-bioadhesion needs of medical device surfaces. We used dopamine and sodium alginate as intermediate layers to drastically increase the grafting density of the zwitterionic brushes and enabled the modified surfaces to have an extremely low coefficient of friction (µ = 0.0078) and to remain non-bioadhesive for 4 hours in vivo. Furthermore, we used molecular dynamics simulations to gain insight into the mechanisms behind the superior anti-adhesion properties of the high-density polymer brushes. Our work contributes to the development and application of surface-modified coatings.
Assuntos
Fibrinolíticos , Polímeros , Animais , Humanos , Coelhos , Polímeros/farmacologia , Dopamina , Lubrificação , Propriedades de Superfície , Alginatos/farmacologiaRESUMO
The construction of high-quality carbon-based energy materials through biotechnology has always been an eager goal of the scientific community. Herein, juice vesicles bioreactors (JVBs) bio-technology based on hesperidium (e.g., pomelo, waxberry, oranges) is first reported for preparation of carbon-based composites with controllable components, adjustable morphologies, and sizes. JVBs serve as miniature reaction vessels that enable sophisticated confined chemical reactions to take place, ultimately resulting in the formations of complex carbon composites. The newly developed approach is highly versatile and can be compatible with a wide range of materials including metals, alloys, and metal compounds. The growth and self-assembly mechanisms of carbon composites via JVBs are explained. For illustration, NiCo alloy nanoparticles are successfully in situ implanted into pomelo vesicles crosslinked carbon (PCC) by JVBs, and their applications as sulfur/carbon cathodes for lithium-sulfur batteries are explored. The well-designed PCC/NiCo-S electrode exhibits superior high-rate properties and enhanced long-term stability. Synergistic reinforcement mechanisms on transportation of ions/electrons of interface reactions and catalytic conversion of lithium polysulfides arising from metal alloy and carbon architecture are proposed with the aid of DFT calculations. The research provides a novel biosynthetic route to rational design and fabrication of carbon composites for advanced energy storage.
RESUMO
Diabetic retinopathy (DR) is one of the most prevalent severe diabetic microvascular complications caused by hyperglycemia. Deciphering the underlying mechanism of vascular injury and finding ways to alleviate hyperglycemia induced microvascular complications is of great necessity. In this study, we identified that a compound ent-9α-hydroxy-15-oxo-16-kauren-19-oic acid (EKO), the diterpenoid isolated and purified from Pteris semipinnata L., exhibited good protective roles against vascular endothelial injury associated with diabetic retinopathy in vitro and in vivo. To further uncover the underlying mechanism, we used unbiased transcriptome sequencing analysis and showed substantial impairment in the focal adhesion pathway upon high glucose and IL-1ß stimulation. EKO could effectively improve endothelial focal adhesion pathway by enhancing the expression of two focal adhesion proteins Vinculin and ITGA11. We found that c-fos protein was involved in regulating the expression of Vinculin and ITGA11, a transcription factor component that was downregulated by high glucose and IL-1ß stimulation and recovered by EKO. Mechanically, EKO facilitated the binding of deubiquitylation enzyme ATXN3 to c-fos protein and promoted its deubiquitylation, thereby elevating its protein level to enhance the expression of Vinculin and ITGA11. Besides, EKO effectively suppressed ROS production and restored mitochondrial function. In vivo studies, we confirmed EKO could alleviate some of the indicators of diabetic mice. In addition, protein levels of ATXN3 and focal adhesion Vinculin molecule were also verified in vivo. Collectively, our findings addressed the endothelial protective role of natural diterpenoid EKO, with emphasize of mechanism on ATXN3/c-fos/focal adhesion signaling pathway as well as oxygen stress suppression, implicating its therapeutic potential in alleviating vascular endothelium injury and diabetic retinopathy.
Assuntos
Diabetes Mellitus Experimental , Retinopatia Diabética , Resinas Epóxi , Hiperglicemia , Camundongos , Animais , Retinopatia Diabética/tratamento farmacológico , Retinopatia Diabética/metabolismo , Endotélio Vascular , Vinculina , Diabetes Mellitus Experimental/metabolismo , Adesões Focais , Proteínas Proto-Oncogênicas c-fos , Hiperglicemia/tratamento farmacológico , Hiperglicemia/metabolismo , Moléculas de Adesão Celular/metabolismo , Glucose/metabolismoRESUMO
"Carbon Peak and Carbon Neutrality" is an important strategic goal for the sustainable development of human society. Typically, a key means to achieve these goals is through electrochemical energy storage technologies and materials. In this context, the rational synthesis and modification of battery materials through new technologies play critical roles. Plasma technology, based on the principles of free radical chemistry, is considered a promising alternative for the construction of advanced battery materials due to its inherent advantages such as superior versatility, high reactivity, excellent conformal properties, low consumption and environmental friendliness. In this perspective paper, we discuss the working principle of plasma and its applied research on battery materials based on plasma conversion, deposition, etching, doping, etc. Furthermore, the new application directions of multiphase plasma associated with solid, liquid and gas sources are proposed and their application examples for batteries (e. g. lithium-ion batteries, lithium-sulfur batteries, zinc-air batteries) are given. Finally, the current challenges and future development trends of plasma technology are briefly summarized to provide guidance for the next generation of energy technologies.
RESUMO
Thrombosis of extracorporeal circuits causes significant morbidity and mortality worldwide. In this study, plasma treatment technology and chemical grafting method were used to construct heparinized surfaces on the PVC substrate, which could not only reduce thrombosis but also decrease the side effects of the direct injection of anticoagulants. The PVC substrate was modified by plasma treatment technology firstly to obtain the active surface with the hydroxyl groups used for grafting. Then, heparin was grafted onto the modified PVC surface using different grafting strategies to prepare different heparinized surfaces. The experimental results indicated that the sodium alginate (SA) and carboxymethyl chitosan (CCS) used as interlayers could significantly increase the graft density of heparin to improve the anticoagulant effects and hemocompatibility of heparinized surfaces. In addition, the modification of heparin can further improve the anticoagulant effects. The CCS/low-molecular-weight heparin (LWMH) surface has the best anticoagulant properties, which can prolong the activated partial thromboplastin time (APTT) values of human plasma for about 35 s, reduce the hemolysis rates to <0.3 %, and perform well in the in-vitro blood circulation test. The heparinized surfaces prepared in this work have great application potential in anticoagulant treatment for medical devices.