Unveiling novel anti-viral mechanisms of ε-poly-l-lysine on tobacco mosaic virus-infected Nicotiana tabacum through microRNA and transcriptome sequencing.

MicroRNAs (miRNAs) play important roles in plant defense against various pathogens. ε-poly-l-lysine (ε-PL), a natural anti-microbial peptide produced by microorganisms, effectively suppresses tobacco mosaic virus (TMV) infection. To investigate the anti-viral mechanism of ε-PL, the expression profiles of miRNAs in TMV-infected Nicotiana tabacum after ε-PL treatment were analyzed. The results showed that the expression levels of 328 miRNAs were significantly altered by ε-PL. Degradome sequencing was used to identify their target genes. Integrative analysis of miRNAs target genes and gene-enriched GO/KEGG pathways indicated that ε-PL regulates the expression of miRNAs involved in critical pathways of plant hormone signal transduction, host defense response, and plant pathogen interaction. Subsequently, virus induced gene silencing combined with the short tandem targets mimic technology was used to analyze the function of these miRNAs and their target genes. The results indicated that silencing miR319 and miR164 reduced TMV accumulation in N. benthamiana, indicating the essential roles of these miRNAs and their target genes during ε-PL-mediated anti-viral responses. Collectively, this study reveals that microbial source metabolites can inhibit plant viruses by regulating crucial host miRNAs and further elucidate anti-viral mechanisms of ε-PL.

Study of Sintering Behavior of Methane Hydrate Particles on the Wall Surface.

The sintering of hydrate aggregates on the pipe wall is a major form of hydrate deposition. Understanding the sintering behavior of hydrates on the wall is crucial for promoting hydrate safety management and preventing pipeline blockage. However, limited research currently exists on this topic. In this study, the cohesive force strength of hydrate particles on the wall surface under different conditions was directly measured using a high-pressure micromechanical force device (HP-MMF). Subsequently, the effects of subcooling and glycine on the cohesive force were investigated. The results indicate that the cohesive force is influenced by different growth states during the process of free water on the wall surface gradually growing into hydrate. Three states with larger measured values during the growth process were selected for research. Observation showed that increased subcooling strengthened sintering by accelerating the growth rate of the hydrate film, resulting in a significant increase in cohesive force. The role of glycine in the methane hydrate system was then evaluated. Glycine was found to reduce the degree of sintering by reducing the growth rate of the hydrate film, thereby decreasing the cohesive force. The optimal concentration in the system was determined to be 0.25 wt %. Moreover, compared with low subcooling (1 °C), glycine had a better effect at high subcooling (5 °C). At 5 °C subcooling and the optimal concentration, the cohesive force in the wall droplet state decreases from 677.38 to 489.02 mN/m, the cohesive force at the low-saturation state decreases from 951.79 to 543.32 mN/m, and the cohesive force at the high-saturation state decreases from 1194.95 to 641.76 mN/m. These findings contribute to a better understanding of the cohesive force behavior of gas hydrate on the inner wall of the pipeline and provide basic data for reducing the risk of hydrate blockage.

Development of a screening system of gene sets for estimating the time of early skeletal muscle injury based on second-generation sequencing technology.

The present study is aimed to address the challenge of wound age estimation in forensic science by identifying reliable genetic markers using low-cost and high-precision second-generation sequencing technology. A total of 54 Sprague-Dawley rats were randomly assigned to a control group or injury groups, with injury groups being further divided into time points (4 h, 8 h, 12 h, 16 h, 20 h, 24 h, 28 h, and 32 h after injury, n = 6) to establish rat skeletal muscle contusion models. Gene expression data were obtained using second-generation sequencing technology, and differential gene expression analysis, weighted gene co-expression network analysis (WGCNA) and time-dependent expression trend analysis were performed. A total of six sets of biomarkers were obtained: differentially expressed genes at adjacent time points (127 genes), co-expressed genes most associated with wound age (213 genes), hub genes exhibiting time-dependent expression (264 genes), and sets of transcription factors (TF) corresponding to the above sets of genes (74, 87, and 99 genes, respectively). Then, random forest (RF), support vector machine (SVM) and multilayer perceptron (MLP), were constructed for wound age estimation from the above gene sets. The results estimated by transcription factors were all superior to the corresponding hub genes, with the transcription factor group of WGCNA performed the best, with average accuracy rates of 96% for three models' internal testing, and 91.7% for the highest external validation. This study demonstrates the advantages of the indicator screening system based on second-generation sequencing technology and transcription factor level for wound age estimation.

Experimental study of the effects of a magnetic field/magnetic field-ferromagnetic nanocomposite pour point depressant on wax deposition.

A magnetic field and pour point depressant, as a new avenue for improving the submarine pipeline flow of waxy oils, has attracted increasing attention along with the development of efficient wax mitigation techniques. Although advances have been made recently in understanding the rheological behavior and crystallization properties of waxy oils, the effect of magnetic field and pour point depressants on wax deposition remains an open question. In this work, a ferromagnetic nanocomposite pour point depressant (FNPPD) was prepared. The variations in wax deposition mass and component under the effect of different magnetic treatments and magnetic field-FNPPDs were investigated using cold fingers and high-temperature gas chromatography. It was evident that both the high-intensity and high-frequency magnetic fields generated by the magnet and magnetic coil can effectively reduce the deposition mass and have a long-term magnetic history effect. The synergistic effect of magnetic fields and FNPPDs concurrently reduced the thickness/mass and wax content in the deposition layer, as compared to the individual use of magnetic fields or FNPPDs. The wax precipitation properties and wax crystal morphology of waxy oils under the action of the magnetic field were characterized by differential scanning calorimetry, focused beam reflectance measurement and polarizing microscopy experiments, and the mechanism of the magnetic field was elaborated from the perspective of crystallization kinetics by combining the fitting analysis of Avrami and size-independent growth model.

Numerical Simulation Study on the Flow Field and Separation Efficiency by Built-In Twisted Tape in the Hydrocyclone.

Aiming at the separation of mud and sand in natural gas hydrate, for the designed built-in twisted tape hydrocyclone, the numerical simulation method was used to study the effects of different types of built-in twisted tape and operating conditions on the internal flow field of the hydrocyclone, separation efficiency, and influence of hydrate particle size distribution. The research results show that the built-in twisted tape has the same swirling direction as the hydrocyclone, which is beneficial to improving the swirling intensity, and the ability to carry and separate solid particles is obviously enhanced. The built-in twisted tape hydrocyclone with a length of 300 mm has better separation efficiency and internal flow field stability. By changing the conditions of the inlet velocity and the initial concentration of hydrate particles, the comparison shows that when the inlet velocity is 8 m/s, the volume of mud and sand is 25%, the initial concentration of hydrate particles is 15%, and the built-in tape is 300 mm long. The tape hydrocyclone has the best separation efficiency. Compared with the basic hydrocyclone, the built-in twisted tape hydrocyclone with a length of 300 mm increases the separation efficiency of mud and sand by 7.49%, while the pressure drop only increases by 2.67%, showing the superiority of the built-in twisted tape structure.

Exploring postmortem succession of rat intestinal microbiome for PMI based on machine learning algorithms and potential use for humans.

The microbial communities may undergo a meaningful successional change during the progress of decay and decomposition that could aid in determining the post-mortem interval (PMI). However, there are still challenges to applying microbiome-based evidence in law enforcement practice. In this study, we attempted to investigate the principles governing microbial community succession during decomposition of rat and human corpse, and explore their potential use for PMI of human cadavers. A controlled experiment was conducted to characterize temporal changes in microbial communities associated with rat corpses as they decomposed for 30 days. Obvious differences of microbial community structures were observed among different stages of decomposition, especially between decomposition of 0-7d and 9-30d. Thus, a two-layer model for PMI prediction was developed based on the succession of bacteria by combining classification and regression models using machine learning algorithms. Our results achieved 90.48% accuracy for discriminating groups of PMI 0-7d and 9-30d, and yielded a mean absolute error of 0.580d within 7d decomposition and 3.165d within 9-30d decomposition. Furthermore, samples from human cadavers were collected to gain the common succession of microbial community between rats and humans. Based on the 44 shared genera of rats and humans, a two-layer model of PMI was rebuilt to be applied for PMI prediction of human cadavers. Accurate estimates indicated a reproducible succession of gut microbes across rats and humans. Together these results suggest that microbial succession was predictable and can be developed into a forensic tool for estimating PMI.

Water Droplets Tailored as Wax Crystal Carriers to Mitigate Wax Deposition of Emulsion.

This study explores how the micro-distribution change of wax crystals from the continuous oil phase to the oil-water interface mitigates the macro wax deposition of an emulsion. Two types of interfacial actions between wax crystals and water droplets, interfacial adsorption and interfacial crystallization, which were induced by two different emulsifiers, sorbitan monooleate (Span 80) and sorbitan monostearate (Span 60), respectively, were detected by differential scanning calorimetry and microscopy observation. The wax interfacial crystallization promoted by Span 60 resulted in the wax being nucleated directly at the oil-water interface prior to the continuous oil phase, conferring the nascent wax crystals and water droplets to be combined as coupled particles. The utilization of the wax interfacial crystallization behavior to hinder wax deposition of an emulsion was further explored. When the coupled wax crystal-water droplet particles were formed during the wax deposition process, water droplets acted as wax crystal carriers, entraining these nascent wax crystals to disperse in the emulsion, which significantly reduced the amount of wax crystals available to form the network of the deposit. In addition, this change also led to the basic structural units in the wax deposit evolving from wax crystal clusters/networks to water droplet flocs. The study elucidates that through adjusting the dispersion of wax crystals from the oil phase to the oil-water interface, water droplets could act as a functional component to tailor the properties of the emulsion or resolve related flow and deposition problems in pipeline transportation.

GPR65 as a potential immune checkpoint regulates the immune microenvironment according to pan-cancer analysis.

It has been reported that inhibition of GPR65 may be effective for the treatment of certain cancers. Nevertheless, the role of GPR65 in various cancers remains unknown. We conducted an exhaustive pan-cancer analysis of GPR65 using multiple databases, including TCGA, GTEx, BioGPS, HPA, cBioPortal, and GeneCards. GPR65 was found to be differentially expressed in various cancers and linked to tumor mutational burden (TMB), microsatellite instability (MSI), and Ploidy, playing a key function in the tumor microenvironment (TME). It is closely linked to the development of Th17 cells as well as Th1 and Th2 cells in certain cancers. Our findings indicate that the expression of GPR65 is highly linked with clinical prognosis, mutations, and immune cell infiltration. It was revealed as an indicator of patient prognosis as well as a possible immunomodulatory role. As a possible new immunological checkpoint, GPR65 could be a target for tumor immunotherapy.

Study on the growth kinetics of methane hydrate in pure water system containing ZIF-8.

The hydrate formation rate is the key to the implementation of solid gas storage and transportation technology by the hydrate method. As a MOF material with strong hydrothermal stability, ZIF-8 has been proved to play a significant role in promoting the nucleation and growth of hydrate. However, the growth kinetics promotion mechanism and growth law of methane hydrate in the ZIF-8 promoter system have not been clarified at present. Therefore, the growth kinetics experiment of methane hydrate in the ZIF-8 promoter system was carried out in a high-pressure visualization reactor to systematically study the effects of the ZIF-8 concentration, undercooling degree, and pressure on the growth law of methane hydrate. The experimental results showed that: (1) the concentration of ZIF-8 had a significant shortening effect on the induction period of methane hydrate. With the increase in the ZIF-8 concentration, the induction time of methane hydrate was shortened from 5.85 h to 0.85 h. The methane gas consumption showed a gradually increasing trend at first, and then with the reaction going on, a dense hydrate film was formed at the gas-liquid interface, which increased the mass transfer resistance, resulting in the increase in the methane gas consumption gradually becoming stable. There were four stages in the growth process of hydrate, namely rapid formation, slow formation, secondary formation, and end formation and the optimal dosage of ZIF-8 promoter exists, and the optimal critical specific content was 0.02 mg mL-1. (2) With the increase of undercooling, the induction time of methane hydrate decreased significantly, and the increase in the methane consumption also showed an increasing trend at first and then decreased. (3) With the increase of the system pressure to 7 MPa, the induction time of methane hydrate decreased from 1.02 h at 6 MPa to 0.2 h at 7 MPa, and the decrease rate was 80.8%, which was mainly due to the presence of "OPEN GATE" in the ZIF-8 accelerator. With the increase of the system pressure, the pore opening of the ZIF-8 material increased, the adsorption of methane increased, and the nucleation and growth of methane hydrate were promoted.

Resource Allocation in Multi-Carrier Multiplexed NOMA Cooperative System.

Non-orthogonal multiple access (NOMA) cooperative communication technology can combine the advantages of NOMA and cooperative communication, providing high spectrum efficiency and increasing user coverage for next-generation wireless systems. However, the research on NOMA cooperative communication technology is still in a preliminary stage and has mainly concentrated on the scenario of fewer users. This paper focuses on a user-centered NOMA collaboration system in an ultra-dense network, and it constructs a resource allocation optimization problem to meet the demands of each user. Then, this paper decomposes the optimization problem into two subproblems; one is the grouping match among multiple relays and users, and the other is jointly allocating power and subcarrier resources. Accordingly, a dynamic packet matching algorithm based on Gale-Shapley and an iterative algorithm based on the difference of convex functions programing are proposed. Compared with existing schemes, the proposed algorithms can improve system throughput while ensuring the quality of service of users.

Guaranteeing QoS for NOMA-Enabled URLLC Based on κ-µ Shadowed Fading Model.

Sixth-generation (6G) wireless communication scenarios are complex and diverse. Small-scale fading is a key part of wireless channels and its impact on performance in scenarios with time sensitivity and 6G ultrareliable and low latency communications (URLLC) quality-of-service requirements cannot be ignored. Therefore, it is necessary to accurately characterize small-scale fading when designing wireless communication systems. In this paper, we derive approximate closed form expressions for the probability density function, cumulative distribution function and moment-generating function of the postprocessing signal-to-noise ratio following the zero-forcing detector in a cell-free massive multiple-input multiple-output (CF mMIMO) system. CF mMIMO system is a nonorthogonal multiple access (NOMA) system that enables users to share all channel uses and can ensure the fairness of the communication quality experienced by different users. Our key contributions include the extension of the κ-µ shadowed fading model to a CF mMIMO system and the proposal of theoretical tools (the derived closed-form expression) to improve its mathematical tractability. By exploiting the statistical characterizations of the arrival and service processes, another important contribution is the exploitation of the upper bound of the queuing delay violation probability (UB-QDVP) over the Mellin transforms of the arrival and service processes in the proposed CF mMIMO system under the κ-µ shadowed fading model. Corroborated by extensive simulations, our analyses validate that the CF mMIMO system outperforms the orthogonal multiple access and power-domain NOMA systems and reveal the relationships among different small-scale fading types, energy efficiency, delay and the UB-QDVP, as well as the accuracy and effectiveness of the proposed theoretical tools based on the κ-µ shadowed fading model.

Optimal Information Update for Energy Harvesting Sensor with Reliable Backup Energy.

The timely delivery of status information collected from sensors is critical in many real-time applications, e.g., monitoring and control. In this paper, we consider a scenario where a wireless sensor sends updates to the destination over an erasure channel with the supply of harvested energy and reliable backup energy. We adopt the metric age of information (AoI) to measure the timeliness of the received updates at the destination. We aim to find the optimal information updating policy that minimizes the time-average weighted sum of the AoI and the reliable backup energy cost. First, when all the environmental statistics are assumed to be known, the optimal information updating policy exists and is proved to have a threshold structure. Based on this special structure, an algorithm for efficiently computing the optimal policy is proposed. Then, for the unknown environment, a learning-based algorithm is employed to find a near-optimal policy. The simulation results verify the correctness of the theoretical derivation and the effectiveness of the proposed method.

Evolution of morphology and cohesive force of hydrate particles in the presence/absence of wax.

In the exploitation of deep-sea oil and gas resources, the multiphase production and transportation process is frequently plagued by pipeline blockage issues. Especially when hydrates and wax coexist simultaneously, the viscosity and plugging tendency of multiphase flow systems will synergistically increase. Understanding the evolution of morphology of hydrate particles and the agglomeration characteristics of hydrate particles in the presence or absence of wax crystals is crucial to flow assurance industry. With the assistance of a visualized reactor equipped with a three axis moving platform, microscopic images of cyclopentane hydrate during hydrate growth were obtained, and the cohesive force between hydrate particles was measured. It was found that during the hydrate growth on wax-free water droplets, the untransformed water inside the particles gradually wetted the surface of the particle. With the increase in temperature and contact time, the shell of hydrate particles changed from solid and rough to smooth and moist. The cohesive force measured in this work ranges from 3.14 ± 0.52 to 11.77 ± 0.68 mN m-1 with different contact times and temperature. When the contact time was 0 s and 10 s, the cohesive force between particles increased first and then stabilized with temperature. When the contact time was 20 s, the cohesive force was greater than the first two cases and showed an overall stable trend. An interesting phenomenon was also discerned: a large water bridge between particles formed during their separation process. For the wax-containing system, it required a longer time for water droplets to be converted into hydrate particles than that for wax-free systems. After wax participated in hydrate growth, hydrate particles showed the properties of elasticity and stickiness, which resulted in a larger liquid bridge between hydrate particles after their contact. It was suggested that wax crystal would alter the shell structure of hydrate particles, and change the surface properties of hydrate particles and the formation process of the liquid bridge, leading to significant and rapid increase in the cohesive force.

Study on the Adhesion Force between Wax Crystal Particles and Hydrate Particles.

In this work, to solve the problem of pipeline blockage caused by the accumulation of hydrate particles and wax particles and to explore the interaction characteristics of adhesive force between gas hydrate particles and wax particles as well as droplets, a high-pressure triaxial mobile device was used to measure the adhesion strength between cyclopentane hydrate particles and different commonly seen phases in the pipeline, including cyclopentane hydrate particles themselves, liquid droplets, and wax crystal particles. These experiments were conducted at different temperatures. The results showed that the adhesion between hydrate and wax particles was decreased with the increase in temperature; this is because the wax is amorphous, the heat absorbed when the temperature rises only increases its average kinetic energy, and the stronger the kinetic energy, the lower its viscosity, resulting in reduced adhesion between particles. Meanwhile, this adhesion was also affected by the concentration of wax. As the wax concentration increased from 1 to 5.32 wt % and then to 8.14 wt %, the adhesion between hydrate and wax particles was first decreased and then increased. This was because when the wax crystal concentration was below 5 wt %, a higher wax molecule concentration meant a more hydrophobic surface, which restricted the formation of a capillary liquid bridge between particles and thus reduced the interforce between wax crystal particles and hydrate particles. When the wax crystal concentration was between 5 and 8 wt %, the change of hydrophobicity was no longer the dominating factor, the increase in wax concentration blocked the hydrate molecular diffusion path, which caused a higher hydrate viscosity, therefore leading to a decreased hydrate molecular diffusion rate and a reduced conversion rate of the liquid bridge in hydrates, the lower conversion rate could subsequently lead to the increasing size of micropores in the hydrate shell, and adhesion between particles was increased.

Experimental Study of the Growth Kinetics of Natural Gas Hydrates in an Oil-Water Emulsion System.

In order to explore the growth kinetics characteristics of NGH (natural gas hydrate) in an oil and gas mixed transportation pipeline and ensure the safe transportation of the pipeline, with the high-pressure hydrate experimental loop, an experimental study on the growth characteristics of NGH in an oil-water emulsion system was carried out, and the effects of pressure, flow rate, and water cut on the hydrate induction time, gas consumption, consumption rate, and hydrate volume fraction were explored, and important experimental rules were obtained. The experiment was divided into three stages: in the rapid formation stage of the hydrate, the temperature and gas consumption rose sharply, and the pressure dropped suddenly. The induction time decreased with the increase of pressure, flow rate, and water cut. The induction time of 6 MPa was 86.13 min, which was shortened by 39.68% compared with the induction time of 142.8 min of 5 MPa. The induction time of 1500 kg/h was 88.27 min, which was shorter by 13.91% than that 102.53 min of 550 kg/h. The induction time of 20% water cut was 58.53 min, which was shorter by 13.99% than that 68.4 min of 15% water cut. The gas consumption and hydrate volume fraction were both increased with the increase of pressure and water cut and decreased with the increase in the flow rate. In the whole process of the formation of NGH, the consumption rate first increased and then decreased. The pressure-drop and apparent viscosity increased with the increase of hydrate volume fraction in a certain range. The sensitivity analysis of hydrate induction time based on the standard regression coefficient method showed that the initial pressure played a major role, followed by the flow rate and the water cut. Based on the sensitivity analysis of hydrate volume fraction by the gray correlation method, it was found that the hydrate volume fraction had the closest relationship with the initial pressure, followed by the flow rate and the water cut. Finally, the empirical formulas of induction time and hydrate volume fraction in an oil-water emulsion system were established.

Study on the Formation Characteristics of CO2 Hydrate and the Rheological Properties of Slurry in a Flow System Containing Surfactants.

Adding low dosage hydrate inhibitors to the hydrate systems makes the generated hydrate particles more uniformly dispersed in the liquid phase, which can significantly reduce the hydrate accumulation and blockage in oil and gas pipelines. The effect of surfactant hydrophile-lipophilic balance (HLB) values on hydrate flow characteristics was studied with a flow loop. The experimental results showed that there was a critical HLB value. When the HLB value was 4.3-9.2, it had an inhibitory effect on the hydrate induction time, and when the HLB value was greater than 10.2, it had a promoting effect. The hydrate volume fraction increased gradually with the increase in the HLB value, while the slurry apparent viscosity decreased with the increase in the HLB value. It was also found that different types of surfactants all showed the effects of anti-agglomerant and dispersion, which can obviously improve the flow of the hydrate slurry. Finally, the analyzed results showed that the hydrate slurry exhibited shear-thinning behaviors that can be identified as a pseudoplastic fluid based on the Herschel-Bulkley rheological model, and the functional relationship between the rheological index and the solid phase hydrate volume fraction was obtained using the fitting method. This study can provide a reference for the preparation of high-efficiency hydrate anti-agglomerants.

Next-generation sequencing identification and multiplex RT-PCR detection for viruses infecting cigar and flue-cured tobacco.

BACKGROUND: Early, precise and simultaneous identification of plant viruses is of great significance for preventing virus spread and reducing losses in agricultural yields. METHODS AND RESULTS: In this study, the identification of plant viruses from symptomatic samples collected from a cigar tobacco planting area in Deyang and a flue-cured tobacco planting area in Luzhou city, Sichuan Province, China, was conducted by deep sequencing of small RNAs (sRNAs) through an Illumina sequencing platform, and plant virus-specific contigs were generated based on virus-derived siRNA sequences. Additionally, sequence alignment and phylogenetic analysis were performed to determine the species or strains of these viruses. A total of 27930450, 21537662 and 28194021 clean reads were generated from three pooled samples, with a total of 105 contigs mapped to the closest plant viruses with lengths ranging from 34 ~ 1720 nt. The results indicated that the major viruses were potato virus Y, Chilli veinal mottle virus, tobacco vein banding mosaic virus, tobacco mosaic virus and cucumber mosaic virus. Subsequently, a fast and sensitive multiplex reverse transcription polymerase chain reaction assay was developed for the simultaneous detection of the most frequent RNA viruses infecting cigar and flue-cured tobacco in Sichuan. CONCLUSIONS: These results provide a theoretical basis and convenient methods for the rapid detection and control of viruses in cigar- and flue-cured tobacco.

Numerical Simulation Study on Flow Laws and Heat Transfer of Gas Hydrate in the Spiral Flow Pipeline with Long Twisted Band.

The natural gas hydrate plugging problems in the mixed pipeline are becoming more and more serious. The hydrate plugging has gradually become an important problem to ensure the safety of pipeline operation. The deposition and heat transfer characteristics of natural gas hydrate particles in the spiral flow pipeline have been studied. The DPM model (discrete phase model) was used to simulate the motion of solid particles, which was used to simulate the complex spiral flow characteristics of hydrate in the pipeline with a long twisted band. The deposition and heat transfer characteristics of gas hydrate particles in the spiral flow pipeline were studied. The velocity distribution, pressure drop distribution, heat transfer characteristics, and particle settling characteristics in the pipeline were investigated. The numerical results showed that compared with the straight flow without a long twisted band, two obvious eddies are formed in the flow field with a long twisted band, and the velocities are maximum at the center of the vortices. Along the direction of the pipeline, the two vortices move toward the pipe wall from near the twisted band, which can effectively carry the hydrate particles deposited on the wall. With the same Reynolds number, the twisted rate was greater, the spiral strength was weaker, the tangential velocity was smaller, and the pressure drop was smaller. Therefore, the pressure loss can be reduced as much as possible with effect of the spiral flow. In a straight light flow, the Nusselt number is in a parabolic shape with the opening downwards. At the center of the pipe, the Nusselt number gradually decreased toward the pipe wall at the maximum, and at the near wall, the attenuation gradient of the Nu number was large. For spiral flow, the curve presented by the Nusselt number was a trough at the center of the pipe and a peak at 1/2 of the pipe diameter. With the reduction of twist rate, the Nusselt number becomes larger. Therefore, the spiral flow can make the temperature distribution more even and prevent the large temperature difference, resulting in the mass formation of hydrate particles in the pipeline wall. Spiral flow has a good carrying effect. Under the same condition, the spiral flow carried hydrate particles at a distance about 3-4 times farther than that of the straight flow.

Study on the kinetic characteristics of gas hydrate in the dioctyl sodium sulfosuccinate system.

Surfactants promote the production of hydrates, which provide a possibility for the industrialization of hydrate technology. In this paper, methane and CO2 hydrate formation experiments were carried out, respectively, with surfactant-dioctyl sodium sulfosuccinate (DSS) using a visual experimental apparatus at a constant pressure. This study explored the influence of the surfactant dosage, experimental pressure, and subcooling temperature on the dynamic characteristics of hydrate formation. The results indicated that a small amount of surfactant had a significant promotion effect on the formation of hydrate, i.e., 600 mg L-1 DSS shortened the induction time of methane hydrate by 60 times and that of CO2 hydrate by 2.4 times, while it increased the formation rate by 3.4 times. Due to the weak acidity of the CO2 solution, the effect of DSS on CO2 hydrate formation was significantly reduced. The DSS concentration had a limited effect on changing the rate of the gas storage capacity of the two hydrates. Compared with other surfactants reported in the literature, DSS showed a better promotion effect on hydrate formation. This study reveals the mechanisms of interfacial tension reduction and the promotion of hydrate growth adhering to the wall using a surfactant with a double-chain structure, which further enriched the hydrate-promoting mechanism, and provides experimental data and a theoretical research basis for the study of kinetic characteristics of hydrates in surfactant systems.

Study on the decomposition mechanism and kinetic model of natural gas hydrate slurry in water-in-oil emulsion flowing systems.

Hydrate slurry decomposition in flow systems is a significant subject that involves flow assurance and development of marine natural gas hydrates. Firstly, the decomposition mechanism of hydrate slurry is studied in this work, and it is proposed that desorption of the gas from the surface of the decomposed hydrate particles might be the main reason for the coalescence of particles and water droplets during the hydrate slurry decomposition. Secondly, a hydrate slurry decomposition kinetic model comprehensively considering the influencing factors (i.e., the intrinsic kinetics, heat and mass transfer) is proposed in this work, based on the classic intrinsic kinetic model and the hydrate slurry dissociation experiments conducted in a flow loop system. The fugacity difference is used as the driving force for the hydrate decomposition, and the influence of particle coalescence, and heat and mass transfer is also considered. The effect of the heat and mass transfer is coupled with the apparent decomposition reaction rate constant. Meanwhile, the time-dependent interfacial parameters would significantly impact on the hydrate dissociation rate, which are considered to enhance the predictive precision of the decomposition kinetic model. Further, the integrated decomposition kinetics model proposed in this paper could well describe the trends of the amount of released gas and the dissociation rate of the experimental flow systems. Through combining the experimental results of the hydrate slurry decomposition, the decomposition parameters under actual flowing conditions were obtained.