Machine Learning-Based Detection of Bladder Cancer by Urine cfDNA Fragmentation Hotspots that Capture Cancer-Associated Molecular Features.

BACKGROUND: cfDNA fragmentomics-based liquid biopsy is a potential option for noninvasive bladder cancer (BLCA) detection that remains an unmet clinical need. METHODS: We assessed the diagnostic performance of cfDNA hotspot-driven machine-learning models in a cohort of 55 BLCA patients, 51 subjects with benign conditions, and 11 healthy volunteers. We further performed functional bioinformatics analysis for biological understanding and interpretation of the tool's diagnostic capability. RESULTS: Urinary cfDNA hotspots-based machine-learning model enabled effective BLCA detection, achieving high performance (area under curve 0.96) and an 87% sensitivity at 100% specificity. It outperformed models using other cfDNA-derived features. In stage-stratified analysis, the sensitivity at 100% specificity of the urine hotspots-based model was 71% and 92% for early (low-grade Ta and T1) and advanced (high-grade T1 and muscle-invasive) disease, respectively. Biologically, cfDNA hotspots effectively retrieved regulatory elements and were correlated with the cell of origin. Urine cfDNA hotspots specifically captured BLCA-related molecular features, including key functional pathways, chromosome loci associated with BLCA risk as identified in genome-wide association studies, or presenting frequent somatic alterations in BLCA tumors, and the transcription factor regulatory landscape. CONCLUSIONS: Our findings support the applicability of urine cfDNA fragmentation hotspots for noninvasive BLCA diagnosis, as well as for future translational study regarding its molecular pathology and heterogeneity.

An ion soft-landing apparatus for ion transport study with surface potential measurement.

An apparatus for explorations of ion transport in a medium and across an interface has been constructed. The ion soft-landing technique is used to deposit low-energy ions onto a pre-adsorbed medium layer on a metal substrate. The designed low-energy ion source can produce a mass-filtered ion beam with tens of nanoampere from solid sources such as bulk metals and salts. The kinetic energy of the ion beam can be lower than 1.0 eV, enabling the ions to be soft-landed onto the medium at the surface. A Kelvin probe with a resolution of less than 32 mV is incorporated to measure the surface potential (SP) variation of the ion-landed sample to monitor the ion transport process in the medium. Temperature-programmed SP measurements on an Ag+-adsorbed ice film prepared on Pt(111) reveal that the temperature threshold for the Ag+-induced SP change of the ice film is about 110 K. The apparatus performance demonstrates its potential in studies of ion transport and related phenomena at both macroscopic and microscopic levels.

Surface and interfacial sciences for future technologies.

Physical science has undergone an evolutional transition in research focus from solid bulks to surfaces, culminating in numerous prominent achievements. Currently, it is experiencing a new exploratory phase-interfacial science. Many a technology with a tremendous impact is closely associated with a functional interface which delineates the boundary between disparate materials or phases, evokes complexities that surpass its pristine comprising surfaces, and thereby unveils a plethora of distinctive properties. Such an interface may generate completely new or significantly enhanced properties. These specific properties are closely related to the interfacial states formed at the interfaces. Therefore, establishing a quantitative relationship between the interfacial states and their functionalities has become a key scientific issue in interfacial science. However, interfacial science also faces several challenges such as invisibility in characterization, inaccuracy in calculation, and difficulty in precise construction. To tackle these challenges, people must develop new strategies for precise detection, accurate computation, and meticulous construction of functional interfaces. Such strategies are anticipated to provide a comprehensive toolbox tailored for future interfacial science explorations and thereby lay a solid scientific foundation for several key future technologies.

Hepatic arterial infusion of GEMOX plus systemic gemcitabine chemotherapy combined with lenvatinib and PD-1 inhibitor in large unresectable intrahepatic cholangiocarcinoma.

PURPOSE: To assess the efficacy and safety of hepatic arterial infusion chemotherapy (HAIC) of gemcitabine and oxaliplatin (GEMOX) plus systemic gemcitabine chemotherapy (GEM-SYS) in combination with lenvatinib and programmed cell death protein-1 (PD-1) inhibitor for patients with large unresectable intrahepatic cholangiocarcinoma (uICC). METHODS: From November 2019 to December 2022, 21 large uICC patients who underwent GEMOX-HAIC (Day 1) and GEM-SYS (Day 8) (3w/cycle) combined with lenvatinib and PD-1 inhibitor were retrospectively enrolled. Local tumor response, progression-free survival (PFS), overall survival (OS), and adverse events (AEs) were analyzed. Tumor response was assessed by the Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1. AEs were evaluated by the common terminology criteria for adverse events (CTCAE) version 5.0. RESULTS: After a median follow-up duration of 16.0 months (range 5-43.5 months), 17 patients had died. The median OS was 19.5 months (range 9-43.5 months), and the median PFS was 6.0 months (range 2.5-38.5 months). The 1-, 2-, and 3-year OS rates were 71.4 %, 42.9 %, and 19.0 %, respectively. The 1-, 2-, and 3-year PFS rates were 33.3 %, 19.0 %, and 9.5 %, respectively. Complete response, partial response, stable disease, and progressive disease were observed in 0 (0 %), 11 (52.3 %), 5 (23.8 %), and 5 (23.8 %) patients, respectively. The disease control rate and objective response rate were 76.1 % and 52.3 %, respectively. None of the enrolled patients experienced grade 5 AEs. CONCLUSIONS: GEMOX-HAIC plus GEM-SYS in combination with lenvatinib and PD-1 inhibitor was effective and well tolerated for patients with large uICC.

Data-Driven Structure Recognition of Scanning Tunneling Microscopy Images in a Case of Iron Carbide.

Scanning tunneling microscopy (STM) serves as a critical tool for high-resolution surface imaging, yet deciphering the atomic structures from STM images on multielement surfaces, such as oxides and carbides, remains a challenging task that heavily relies on the expertise and intuition of researchers. In this study, we introduce a data-driven method for rapid structural recognition from STM images. This method involves extracting structural features, filtering through a structural database, and matching with simulated STM images and surface energy analyses, thereby providing researchers with several of the most probable structures. We demonstrate the capabilities of this technique using our previously reported iron carbide grown on an Fe(110) crystal. By proposing a candidate structure set and establishing a comprehensive database linking STM images to corresponding structures and surface energies, we selected 6 out of more than 10 000 possible surfaces. On the basis of these 6 recommendations, researchers can conveniently determine the real surface structures. Our work provides an efficient tool for the structure recognition of STM images to construct surface structures, potentially serving as a universal auxiliary tool for STM structural analysis.

Self-assembled superstructure alleviates air-water interface effect in cryo-EM.

Cryo-electron microscopy (cryo-EM) has been widely used to reveal the structures of proteins at atomic resolution. One key challenge is that almost all proteins are predominantly adsorbed to the air-water interface during standard cryo-EM specimen preparation. The interaction of proteins with air-water interface will significantly impede the success of reconstruction and achievable resolution. Here, we highlight the critical role of impenetrable surfactant monolayers in passivating the air-water interface problems, and develop a robust effective method for high-resolution cryo-EM analysis, by using the superstructure GSAMs which comprises surfactant self-assembled monolayers (SAMs) and graphene membrane. The GSAMs works well in enriching the orientations and improving particle utilization ratio of multiple proteins, facilitating the 3.3-Å resolution reconstruction of a 100-kDa protein complex (ACE2-RBD), which shows strong preferential orientation using traditional specimen preparation protocol. Additionally, we demonstrate that GSAMs enables the successful determinations of small proteins (<100 kDa) at near-atomic resolution. This study expands the understanding of SAMs and provides a key to better control the interaction of protein with air-water interface.

Jin-Gu-Lian Capsule Did Not Significantly Improve Clinical Value in Rheumatoid Arthritis Therapy: A Real-World Study.

Purpose: To investigate the clinical value of adding Jin-gu-lian (JGL) capsules into rheumatoid arthritis (RA) treatment by examining its impact on disease activity and quality of life (QoL) through a real-world study (RWS). Patients and methods: RWS was conducted to compare the inflammatory markers, including IgM-RF, ESR, and CRP, between RA patients treated with only Western medicine (reference group) and Western medicine plus JGL (study group) during one-year follow-up. The clinical data was acquired from the hospital information system (HIS). Telephone call-based follow-up on QoL (SF-36) and accompanying symptoms, including gastrointestinal complaints, attacks of pneumonia, herpes zoster, URTIs, UTIs, and LTBIs. Finally, the anti-rheumatic drugs given to both groups were also compared. RWS was further validated for its feasibility by performing studies with hydroxychloroquine (HCQ) treatment, which is a commonly used anti-rheumatic drug for RA with mild effect. Results: The study group failed to show a significant effect on inflammatory markers, especially on the CRP levels, indicating no additional clinical value of supplementing with JGL. Similarly, at the endpoint, no significant differences between the two groups on QoL and related symptoms were observed. Our study suggests that the patients in the study group might need more anti-rheumatic drugs to fill the treatment insufficiency, and the application ratio of NSAIDs would be significantly higher than the reference group. By conducting this study on HCQ treatment, the positive aspects of controlling disease activity and reducing NSAIDs application were found, which demonstrates the utility of performing the RWS to evaluate the effect of JGL. Conclusion: Adding JGL did not significantly improve the clinical efficacy of RA treatment by this RWS. Folk herbal prescriptions such as JGL are suggested to underwent strict clinical trials before application.

The first high-altitude autotetraploid haplotype-resolved genome assembled (Rhododendron nivale subsp. boreale) provides new insights into mountaintop adaptation.

BACKGROUND: Rhododendron nivale subsp. boreale Philipson et M. N. Philipson is an alpine woody species with ornamental qualities that serve as the predominant species in mountainous scrub habitats found at an altitude of ∼4,200 m. As a high-altitude woody polyploid, this species may serve as a model to understand how plants adapt to alpine environments. Despite its ecological significance, the lack of genomic resources has hindered a comprehensive understanding of its evolutionary and adaptive characteristics in high-altitude mountainous environments. FINDINGS: We sequenced and assembled the genome of R. nivale subsp. boreale, an assembly of the first subgenus Rhododendron and the first high-altitude woody flowering tetraploid, contributing an important genomic resource for alpine woody flora. The assembly included 52 pseudochromosomes (scaffold N50 = 42.93 Mb; BUSCO = 98.8%; QV = 45.51; S-AQI = 98.69), which belonged to 4 haplotypes, harboring 127,810 predicted protein-coding genes. Conjoint k-mer analysis, collinearity assessment, and phylogenetic investigation corroborated autotetraploid identity. Comparative genomic analysis revealed that R. nivale subsp. boreale originated as a neopolyploid of R. nivale and underwent 2 rounds of ancient polyploidy events. Transcriptional expression analysis showed that differences in expression between alleles were common and randomly distributed in the genome. We identified extended gene families and signatures of positive selection that are involved not only in adaptation to the mountaintop ecosystem (response to stress and developmental regulation) but also in autotetraploid reproduction (meiotic stabilization). Additionally, the expression levels of the (group VII ethylene response factor transcription factors) ERF VIIs were significantly higher than the mean global gene expression. We suspect that these changes have enabled the success of this species at high altitudes. CONCLUSIONS: We assembled the first high-altitude autopolyploid genome and achieved chromosome-level assembly within the subgenus Rhododendron. In addition, a high-altitude adaptation strategy of R. nivale subsp. boreale was reasonably speculated. This study provides valuable data for the exploration of alpine mountaintop adaptations and the correlation between extreme environments and species polyploidization.

Direct Ink Writing of SiCN/RuO2/TiB2 Composite Ceramic Ink for High-Temperature Thin-Film Sensors.

Direct ink writing (DIW) of high-temperature thin-film sensors holds significant potential for monitoring extreme environments. However, existing high-temperature inks face a trade-off between cost and performance. This study proposes a SiCN/RuO2/TiB2 composite ceramic ink. The added TiB2, after annealing in a high-temperature atmospheric environment, forms B2O3 glass, which synergizes with the SiO2 glass phase formed from the SiCN precursor to effectively encapsulate RuO2 particles. This enhances the film's density and adhesion to the substrate, preventing RuO2 volatilization at high temperatures. Additionally, the high conductivity of TiB2 improves the film's overall conductivity. Test results indicate that the SiCN/RuO2/TiB2 film exhibits high linearity from room temperature to 900 °C, high stability (resistance drift rate of 0.1%/h at 800 °C), and high conductivity (4410 S/m). As a proof of concept, temperature sensors and a heat flux sensor were successfully fabricated on a metallic hemispherical surface. Performance tests in extreme environments using high-power lasers and flame guns verified that the conformal thin-film sensor can accurately measure spherical temperature and heat flux, with a heat flux sensor response time of 53 ms. In conclusion, the SiCN/RuO2/TiB2 composite ceramic ink developed in this study offers a high-performance and cost-effective solution for high-temperature conformal thin-film sensors in extreme environments.

Spatiotemporal geographically weighted regression analysis for runoff variations in the Weihe River Basin.

In order to investigate the effects of vegetation changes on runoff and to obtain recommendations for improving runoff in the Weihe River Basin (. In this study, a spatiotemporal geographic autocorrelation weighted regression analysis (SGAWRA) approach was newly developed based on previous studies. This approach investigates spatial non-stationarity of the dynamic response from vegetation variations to climatic change and human activity. Implications of spatial non-stationarity related to runoff variability were also discussed, which in turn yield the effect that vegetation changes have on runoff. The method systematically analysed the spatial non-stationarity of vegetation variations and its associated effects on runoff. Therefore, more closely related results with less error were produced at each step, and results with more accuracy were obtained. These results indicated that the average trend rates of NDVI in the annual average, each season, and the growing season (Growing season refers to April to September) exceeded 0. Areas where NDVI show a growing trend cover more than 50%, which is greater than the area with a decreasing trend. The GWR regression parameters of precipitation, average temperature, and NDVI are all greater than 0. The GWR regression parameters of human activities and NDVI also have more than 50% of the area greater than 0. Based on the visual analysis of the calculation results, it can be seen that there are obvious spatial trends in the data, and the spatial data are significantly different between different regions. Therefore, WRB can be regarded as spatio-temporally non-stationary. In the WRB, the underlying surface change with vegetation change as the prominent feature is the leading cause (about 60%) of the runoff attenuation. The results showed that WRB has spatial and temporal non-stationarity. The spatial non-stationarity of vegetation has a greater effect on runoff changes. The results of this study support recommendations for improving runoff in the WRB.

Citrate and low-dose heparin combined anticoagulation in pediatric continuous renal replacement therapy.

There remains no optimal anticoagulation protocol for continuous renal replacement therapy (CRRT) with regional citrate anticoagulation (RCA) in pediatric patients with elevated D-dimer levels. We aimed to assess the effects of different anticoagulation strategies on the risk of CRRT filter clotting in these patients. Pediatric patients undergoing CRRT were retrospectively grouped based on pre-CRRT D-dimer levels and anticoagulant: D-RCA group (normal D-dimer, RCA only, n = 22), D+ RCA group (elevated D-dimer, RCA only, n = 50), and D+ RCA+ systemic heparin anticoagulation (SHA) group (elevated D-dimer, RCA combined with SHA, n = 55). The risk of filter clotting and incidence of bleeding were compared among the groups. Among the groups, the D+ RCA+ SHA group had the longest filter lifespan; further, the incidence of bleeding was not increased by concurrent use of low-dose heparin for anticoagulation. Moreover, concurrent heparin anticoagulation was associated with a decreased risk of filter clotting. Contrastingly, high pre-CRRT hemoglobin and D-dimer levels and post-filter ionized calcium level > 0.4 mmol/L were associated with an increased risk of filter clotting. RCA combined with low-dose heparin anticoagulation could reduce the risk of filter clotting and prolong filter lifespan without increasing the risk of bleeding in patients with elevated D-dimer levels undergoing CRRT.

Drug screening on digital microfluidics for cancer precision medicine.

Drug screening based on in-vitro primary tumor cell culture has demonstrated potential in personalized cancer diagnosis. However, the limited number of tumor cells, especially from patients with early stage cancer, has hindered the widespread application of this technique. Hence, we developed a digital microfluidic system for drug screening using primary tumor cells and established a working protocol for precision medicine. Smart control logic was developed to increase the throughput of the system and decrease its footprint to parallelly screen three drugs on a 4 × 4 cm2 chip in a device measuring 23 × 16 × 3.5 cm3. We validated this method in an MDA-MB-231 breast cancer xenograft mouse model and liver cancer specimens from patients, demonstrating tumor suppression in mice/patients treated with drugs that were screened to be effective on individual primary tumor cells. Mice treated with drugs screened on-chip as ineffective exhibited similar results to those in the control groups. The effective drug identified through on-chip screening demonstrated consistency with the absence of mutations in their related genes determined via exome sequencing of individual tumors, further validating this protocol. Therefore, this technique and system may promote advances in precision medicine for cancer treatment and, eventually, for any disease.

Selective Cleavage of α-Olefins to Produce Acetylene and Hydrogen.

Acetylene production from mixed α-olefins emerges as a potentially green and energy-efficient approach with significant scientific value in the selective cleavage of C-C bonds. On the Pd(100) surface, it is experimentally revealed that C2 to C4 α-olefins undergo selective thermal cleavage to form surface acetylene and hydrogen. The high selectivity toward acetylene is attributed to the 4-fold hollow sites which are adept at severing the terminal double bonds in α-olefins to produce acetylene. A challenge arises, however, because acetylene tends to stay at the Pd(100) surface. By using the surface alloying methodology with alien Au, the surface Pd d-band center has been successfully shifted away from the Fermi level to release surface-generated acetylene from α-olefins as a gaseous product. Our study actually provides a technological strategy to economically produce acetylene and hydrogen from α-olefins.

Regioselective hydroformylation of propene catalysed by rhodium-zeolite.

Hydroformylation is an industrial process for the production of aldehydes from alkenes1,2. Regioselective hydroformylation of propene to high-value n-butanal is particularly important, owing to a wide range of bulk applications of n-butanal in the manufacture of various necessities in human daily life3. Supported rhodium (Rh) hydroformylation catalysts, which often excel in catalyst recyclability, ease of separation and adaptability for continuous-flow processes, have been greatly exploited4. Nonetheless, they usually consist of rotationally flexible and sterically unconstrained Rh hydride dicarbonyl centres, only affording limited regioselectivity to n-butanal5-8. Here we show that proper encapsulation of Rh species comprising Rh(I)-gem-dicarbonyl centres within a MEL zeolite framework allows the breaking of the above model. The optimized catalyst exhibits more than 99% regioselectivity to n-butanal and more than 99% selectivity to aldehydes at a product formation turnover frequency (TOF) of 6,500 h-1, surpassing the performance of all heterogeneous and most homogeneous catalysts developed so far. Our comprehensive studies show that the zeolite framework can act as a scaffold to steer the reaction pathway of the intermediates confined in the space between the zeolite framework and Rh centres towards the exclusive formation of n-butanal.

Platinum-based adjuvant chemoradiotherapy versus adjuvant radiotherapy in patients with head and neck adenoid cystic carcinoma.

PURPOSE: The objective of the study was to assess the effectiveness and toxicity of platinum-based adjuvant chemoradiotherapy (POCRT) in comparison to postoperative radiotherapy (PORT) in patients with head and neck adenoid cystic carcinoma (HNACC). MATERIALS AND METHODS: This retrospective study analyzed patients diagnosed with HNACC at our center between January 2010 and April 2020. A 1:1 propensity score matching method was used to create a matched cohort. RESULTS: In this study, 206 patients were analyzed, with 147 patients (71.4%) receiving postoperative radiotherapy (PORT) and 59 patients (28.6%) receiving POCRT. Twenty-one patients experienced local-regional failure. The 3-, 5-, and 10-yr local-regional control (LRC) rate for the cohort were 92.0%, 90.6%, and 86.9%, respectively. In both the entire cohort and the matched cohort, the POCRT group exhibited superior LRC compared to the PORT group (Gray's test, all P < 0.05*). Multivariate analysis identified adjuvant concurrent chemotherapy as an independent prognostic factor for LRC (Competing risks regression, HR = 0.144, 95% CI 0.026-0.802, P = 0.027*). In addition, the POCRT group had higher incidences of upper gastrointestinal toxicity and hematologic toxicities, including leukopenia, neutropenia, and anemia (all P < 0.05*). CONCLUSION: In terms of reducing locoregional failures in HNACC patients, POCRT may potentially offer a more effective therapeutic approach than using PORT alone, although it also entails an augmented burden of treatment-related toxicity.

The effect of surgical starting time on elective colorectal cancer surgery: A propensity score matching analysis.

The purpose of the current study is to analyze whether surgical starting time affects the short-term outcomes of elective colorectal cancer (CRC) surgery. We retrospectively collected CRC patients who underwent elective surgery from Jan 2008 to Jan 2021 in a single clinical center. The effect of surgical starting time (morning surgery vs afternoon surgery, day surgery vs night surgery) on elective CRC surgery was analyzed using propensity score matching (PSM). A total of 6783 patients were included in the current study. There were 5751 patients in day surgery group and 1032 patients in night surgery group, and there were 2920 patients in morning surgery group and 2831 patients in afternoon surgery group. After 1:1 ratio PSM, there were no significant difference in terms of the baseline information (P > .05). Day surgery group had longer operation time (P = .000) and longer hospital stay (P = .029) than night surgery group after PSM. Morning surgery group had longer operation time than afternoon surgery group before PSM (P = .000) and after PSM (P = .000). Univariate and multivariate analysis of the total of 6783 patients were conducted to find predictors of complications, and found that night surgery was a predictor of major complications (P = .002, OR = 1.763, 95% CI = 1.222-2.543) but not a predictor of overall complications (P = .250, OR = 1.096, 95% CI = 0.938-1.282). Night surgery is a predictor of major complications after elective CRC surgery, therefore, surgeons should be careful when operating at night.

Omission of radiotherapy to lymph node level III in patients with cN0 adenoid cystic carcinoma of the major salivary gland: a single center experience.

PURPOSE: Due to the rarity of adenoid cystic carcinoma (ACC) of the major salivary gland, there is no consensus on the extent of prophylactic neck irradiation (PNI) for patients with clinically negative lymph nodes (cN0) disease. MATERIALS AND METHODS: We conducted a retrospective analysis of all patients with ACC of the major salivary gland who received treatment at our center between January 2010 and April 2020. The primary endpoint was regional failure-free survival (RRFS). Secondary endpoints included overall survival (OS), distant metastasis-free survival (DMFS), local recurrence-free survival (LRFS), and acute toxicity. RESULTS: A total of 139 patients were included in the analysis. For cN0 patients, the 5-year RRFS, OS, DMFS, and LRFS were 93.2%, 90.2%, 75.7%, and 91.4%, respectively. Multivariate analysis revealed that PORT was an independent prognostic factor for RRFS and LRFS. No statistically significant differences were observed between the Level III sparing PNI group and the Standard PNI group in terms of RRFS, OS, DMFS, and LRFS. The doses delivered to the larynx and thyroid in the Level III sparing PNI group were significantly lower than those in the Standard PNI group. CONCLUSION: In patients with cN0 ACC of the major salivary gland, PNI improves regional control, and the level III nodal region sparing radiotherapy does not increase the risk of level III recurrence, while potentially reducing toxicity.

Novel stent-assisted ileal bypass is applied to avoid protective stoma and prevent anastomotic leakage for rectal cancer.

PURPOSE: This study aimed to investigate the safety and feasibility of a novel stent-assisted ileal bypass for rectal cancer patients who received sphincter-preserving surgery. METHODS: Patients who were diagnosed with rectal cancer and received sphincter-preserving surgery plus a novel stent-assisted ileal bypass were respectively included from January 2022 to January 2023. Biofragmentable ileal stent with diaphragm sheet in the cavity was placed in the terminal ileum using absorbable sutures after anastomosis. At the proximal end of the stent, an intestinal diversion tube was placed in the prefabricated purse-string, through which faeces were drained. The stent completely disintegrated in the body after 3-4 weeks, which protected the anastomosis after surgery and avoided protective stoma. Clinical characteristics and surgical outcomes were collected. RESULTS: Eleven patients who successfully received surgery were included. There were seven (63.6%) males and four (36.4%) females. The tumour size was 3.2 ± 1.7 cm and the lower verge of tumour to anal verge was 6.8 ± 1.3 cm. As for surgical outcomes, operation time was 216.4 ± 54.1 min, blood loss was 43.6 ± 64.6 mL, time to first flatus via intestinal diversion tube was 3.2 ± 1.1 days, time to discharge stent was 22.8 ± 3.0 days, and postoperative hospital stay was 21.0 ± 5.4 days. Two patients suffered from postoperative complications including pneumonia and incision infection. CONCLUSION: This novel stent-assisted ileal bypass is safe and feasible, it provides a new choice for rectal cancer patients to avoid protective stoma and secondary surgery.

Rapid laser fabrication of indium tin oxide and polymer-derived ceramic composite thin films for high-temperature sensors.

Thin-film sensors are essential for real-time monitoring of components in high-temperature environments. Traditional fabrication methods often involve complicated fabrication steps or require prolonged high-temperature annealing, limiting their practical applicability. Here, we present an approach using direct ink writing and laser scanning (DIW-LS) to fabricate high-temperature functional thin films. An indium tin oxide (ITO)/preceramic polymer (PP) ink suitable for DIW was developed. Under LS, the ITO/PP thin film shrank in volume. Meanwhile, the rapid pyrolysis of PP into amorphous precursor-derived ceramic (PDC) facilitated the faster sintering of ITO nanoparticles and improved the densification of the thin film. This process realized the formation of a conductive network of interconnected ITO nanoparticles. The results show that the ITO/PDC thin film exhibits excellent stability, with a drift rate of 4.7 % at 1000 °C for 25 h, and withstands temperatures up to 1250 °C in the ambient atmosphere. It is also sensitive to strain, with a maximum gauge factor of -6.0. As a proof of concept, we have used DIW-LS technology to fabricate a thin-film heat flux sensor on the surface of the turbine blade, capable of measuring heat flux densities over 1 MW/m2. This DIW-LS process provides a viable approach for the integrated, rapid, and flexible fabrication of thin film sensors for harsh environments.

Clinical application of a novel stent-assisted in situ intestinal bypass in preventing postoperative anastomotic leakage for low-mid rectal cancer: A retrospective study.

This study aimed to investigate the safety and feasibility of a novel stent-assisted in situ intestinal bypass for low-mid rectal cancer patients. Patients who were diagnosed with rectal cancer and received laparoscopic low anterior rectal resection plus a novel stent-assisted in situ intestinal bypass were respectively included from March 2022 to June 2022. Biofragmentable intestinal stent with a protective sleeve was placed in the proximal colon before anastomosis, and feces could be discharged through the protective sleeve without touching the anastomosis, which achieved an in situ bypass of feces. Perioperative characteristics and short-term outcomes were collected. Rectal imaging was performed each week after surgery for the first 3 weeks to surveil the stent and feces delivery. Follow-ups were conducted for more than 3 months. Thirty patients who successfully received surgery were included in this study. There were 18 (60.0%) males and 12 (40.0%) females. As for perioperative characteristics, operation time was 213.8 ± 43.0 minutes, blood loss was 53.3 ± 24.6 mL, time to first flatus via protective sleeve after surgery was 3.2 ± 1.1 days, postoperative hospital stay was 11.8 ± 1.6 days, and time to discharge stent was 22.4 ± 3.2 days. As for short-term outcomes, 6 patients suffered from pneumonia, urinary tract infection or incision infection. During the follow-up, there was no anastomotic leakage or mortality. This novel stent-assisted in situ intestinal bypass is safe and feasible, it might be an applicable way to prevent postoperative anastomotic leakage for patients with low-mid rectal cancer.