Supercapacitors and triboelectric nanogenerators based on electrodes of greener iron nanoparticles/carbon nanotubes composites.

The development of supporting materials based on carbon nanotubes (CNTs) impregnated with iron nanoparticles via a sustainable and green synthesis employing plant extract of Punica granatum L. leaves was carried out for the iron nanoparticle modification and the following impregnation into the carbon nanotubes composites (CNT-Fe) that were also coated with polypyrrole (CNT-Fe + PPy) for use as electrode for supercapacitor and triboelectric nanogenerators. The electrochemical characterization of the materials by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) assays revealed that the CNT-Fe + PPy gave rise to better performance due to the association of double-layer capacitance behavior of carbon derivative in association with the pseudocapacitance contribution of PPy resulting in an areal capacitance value 202 mF/ cm2 for the overall composite. In terms of the application of electrodes in triboelectric nanogenerators, the best performance for the composite of CNT-Fe + PPy was 60 V for output voltage and power density of 6 µW/cm2. The integrated system showed that the supercapacitors can be charged directly by the nanogenerator from 0 to 42 mV in 300 s. The successful green synthesis of iron nanoparticles on CNT and further PPy coating provides a feasible method for the design and synthesis of high-performance SCs and TENGs electrode materials. This work provides a systematic approach that moves the research front forward by generating data that underpins further research in self-powered electronic devices.

Antimicrobial and antibiofilm activity of highly soluble polypyrrole against methicillin-resistant Staphylococcus aureus.

AIMS: The purpose was to evaluate the antimicrobial activity of highly soluble polypyrrole (Hs-PPy), alone or combined with oxacillin, as well as its antibiofilm potential against methicillin-resistant Staphylococcus aureus strains. Furthermore, the in silico inhibitory mechanism in efflux pumps was also investigated. METHODS AND RESULTS: Ten clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA) and two reference strains were used. Antimicrobial activity was determined by broth microdilution, and the combination effect with oxacillin was evaluated by the checkerboard assay. The biofilm formation capacity of MRSA and the interference of Hs-PPy were evaluated. The inhibitory action of Hs-PPy on the efflux pump was evaluated in silico through molecular docking. Hs-PPy showed activity against the isolates, with inhibitory action between 62.5 and 125 µg ml-1 and bactericidal action at 62.5 µg ml-1, as well as synergism in association with oxacillin. The isolates ranged from moderate to strong biofilm producers, and Hs-PPy interfered with the formation of this structure, but not with mature biofilm. There was no in silico interaction with the efflux protein EmrD, the closest homolog to NorA. CONCLUSIONS: Hs-PPy interferes with biofilm formation by MRSA, has synergistic potential, and is an efflux pump inhibitor.

Synergistic interaction of clove, cinnamon, and eucalyptus essential oils impregnated in cellulose acetate electrospun fibers as antibacterial agents against Staphylococcus aureus.

The development of antibiotic-free antibacterial strategies applied in the control of bacterial and biofilm proliferation on surfaces is an important topic in discussion in the literature. Essential oils have been explored as isolated and combined components to act as an antibacterial material that inhibits bacterial proliferation, avoiding the contamination of surfaces. Herein, cellulose acetate electrospun fibers impregnated with essential oils of clove, cinnamon and eucalyptus and their combination (clove + cinnamon, cinnamon + eucalyptus and clove + eucalyptus) were explored against the standard strain of Staphylococcus aureus (ATCC 25923). As isolated components, the best performance follows the order clove>cinnamon>eucalyptus essential oil. The association of clove and cinnamon into cellulose acetate electrospun fibers returned a promising and fast antibacterial and antibiofilm activity (improvement in 65%), as a piece of evidence that synergism is observed for the association of essential oils incorporated into electrospun fibers that preserves the antibacterial activity by encapsulation of components.

Sustainable Biomass-Derived Carbon Electrodes for Potassium and Aluminum Batteries: Conceptualizing the Key Parameters for Improved Performance.

The development of sustainable, safe, low-cost, high energy and density power-density energy storage devices is most needed to electrify our modern needs to reach a carbon-neutral society by ~2050. Batteries are the backbones of future sustainable energy sources for both stationary off-grid and mobile plug-in electric vehicle applications. Biomass-derived carbon materials are extensively researched as efficient and sustainable electrode/anode candidates for lithium/sodium-ion chemistries due to their well-developed tailored textures (closed pores and defects) and large microcrystalline interlayer spacing and therefore opens-up their potential applications in sustainable potassium and aluminum batteries. The main purpose of this perspective is to brief the use of biomass residues for the preparation of carbon electrodes for potassium and aluminum batteries annexed to the biomass-derived carbon physicochemical structures and their aligned electrochemical properties. In addition, we presented an outlook as well as some challenges faced in this promising area of research. We believe that this review enlightens the readers with useful insights and a reasonable understanding of issues and challenges faced in the preparation, physicochemical properties and application of biomass-derived carbon materials as anodes and cathode candidates for potassium and aluminum batteries, respectively. In addition, this review can further help material scientists to seek out novel electrode materials from different types of biomasses, which opens up new avenues in the fabrication/development of next-generation sustainable and high-energy density batteries.

Oomicidal activity of polypyrrole nanoparticles against Pythium insidiosum.

This study evaluated in-vitro action of a new molecule, the polypyrrole nanoparticles (Ppy-NP), against Pythium insidiosum isolates using M38-A2/CLSI; the minimal inhibitory (MIC) and minimal oomicidal (MOC) concentrations were also determined. Additionally, changes in the hyphae wall of P. insidiosum CBS 575.85 treated with Ppy-NP were evaluated by scanning electron microscopy (SEM). The MIC100 and MOC for all isolates ranged from 8 to 32 µg mL-1, and the MIC90 and MIC50 were 16 µg mL-1. The SEM showed structural damage to the hyphae of P. insidisoum treated with Ppy-NP, as hyphae surfaces with less turgidity were found, thereby showing scaling and ruptures compared to the control (untreated hyphae). Our findings highlighted the anti-P. insidiosum properties of Ppy-NP proved to be a promising candidate for research using pythiosis experimental models.

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications.

Preparing sustainable and highly efficient biochars as electrodes remains a challenge for building green energy storage devices. In this study, efficient carbon electrodes for supercapacitors were prepared via a facile and sustainable single-step pyrolysis method using spruce bark as a biomass precursor. Herein, biochars activated by KOH and ZnCl2 are explored as templates to be applied to prepare electrodes for supercapacitors. The physical and chemical properties of biochars for application as supercapacitors electrodes were strongly affected by factors such as the nature of the activators and the meso/microporosity, which is a critical condition that affects the internal resistance and diffusive conditions for the charge accumulation process in a real supercapacitor. Results confirmed a lower internal resistance and higher phase angle for devices prepared with ZnCl2 in association with a higher mesoporosity degree and distribution of Zn residues into the matrix. The ZnCl2-activated biochar electrodes' areal capacitance reached values of 342 mF cm-2 due to the interaction of electrical double-layer capacitance/pseudocapacitance mechanisms in a matrix that favors hydrophilic interactions and the permeation of electrolytes into the pores. The results obtained in this work strongly suggest that the spruce bark can be considered a high-efficiency precursor for biobased electrode preparation to be employed in SCs.

Comparative Proteomic Analyses Between Biofilm-Forming and Non-biofilm-Forming Strains of Corynebacterium pseudotuberculosis Isolated From Goats.

Caseous lymphadenitis (CLA) is a chronic disease that affects small ruminants and causes economic losses in the associated breeding system. The causative agent of CLA is Corynebacterium pseudotuberculosis, a Gram-positive bacterium that exhibits tropism for external and internal lymph nodes and induces abscess formation in the host. Bacterial communities often produce a biofilm matrix that serves various functions, including protection against hostile environmental conditions, antibiotics, and the host immune response. Although biofilm formation has been reported for C. pseudotuberculosis, not all strains demonstrate this property in culture. In this work, we report the first comparative proteomic analysis of one biofilm-forming (CAPJ4) and one biofilm-non-forming strain (CAP3W) of C. pseudotuberculosis isolated from goats. Bacterial whole cell protein extracts were obtained for mass spectrometry analyses. Using LC-MS/MS, our studies reveal three and four proteins exclusively found in the CAPJ4 and CAP3W proteome, respectively. In addition, label-free quantitative analysis identified 40 proteins showing at-least 2-fold higher values in CAPJ4 compared CAP3W proteome Notably, CAPJ4 differentially synthesized the penicillin-binding protein, which participates in the formation of peptidoglycans. CAPJ4 also exhibited upregulation of N-acetylmuramoyl-L-alanine amidase and galactose-1-phosphate uridylyltransferase, which are involved in biofilm formation and exopolysaccharide biosynthesis. Here, we demonstrate that biofilm formation in C. pseudotuberculosis is likely associated with specific proteins, some of which were previously shown to be associated with virulence and biofilm formation in other organisms. Our findings may drive studies related to the bacterial mechanisms involved in the biofilm formation, in addition to providing targets for the treatment of CLA.

Sustainable Biomass Activated Carbons as Electrodes for Battery and Supercapacitors-A Mini-Review.

Some recent developments in the preparation of biomass carbon electrodes (CEs) using various biomass residues for application in energy storage devices, such as batteries and supercapacitors, are presented in this work. The application of biomass residues as the primary precursor for the production of CEs has been increasing over the last years due to it being a renewable source with comparably low processing cost, providing prerequisites for a process that is economically and technically sustainable. Electrochemical energy storage technology is key to the sustainable development of autonomous and wearable electronic devices. This article highlights the application of various types of biomass in the production of CEs by using different types of pyrolysis and experimental conditions and denotes some possible effects on their final characteristics. An overview is provided on the use of different biomass types for the synthesis of CEs with efficient electrochemical properties for batteries and supercapacitors. This review showed that, from different biomass residues, it is possible to obtain CEs with different electrochemical properties and that they can be successfully applied in high-performance batteries and supercapacitors. As the research and development of producing CEs still faces a gap by linking the type and composition of biomass residues with the carbon electrodes' electrochemical performances in supercapacitor and battery applications, this work tries to diminish this gap. Physical and chemical characteristics of the CEs, such as porosity, chemical composition, and surface functionalities, are reflected in the electrochemical performances. It is expected that this review not only provides the reader with a good overview of using various biomass residues in the energy storage applications, but also highlights some goals and challenges remaining in the future research and development of this topic.

Anti-biofilm Effect of ß-Lapachone and Lapachol Oxime Against Isolates of Staphylococcus aureus.

Antimicrobial resistance in bacteria, such as Staphylococcus aureus, has been the subject of many assistance studies of alternatives for the treatment of infections. These studies aim to solve this problem for bacteria, such as biofilm formation. Aiming to control the emergence of the problem or enhance antibiotic activity, the data sources are inserted into new therapeutic alternatives for the treatment of infections. ß-Lapachone and Lapachol Oxime are semi-synthetic derivatives of Lapachol with antimicrobial potential. Clinical isolates from human blood cultures were used in this study. Scanning electron microscopy (SEM) was performed following the glutaraldehyde fixation protocol. The presence of ß-Lapachone and Lapachol Oxima interfered in the biofilm formation state. In the MEV, the effect was observed in the reduction of the population of biofilm-forming cells. Therefore, it was possible to conclude the promising potential of the anti-biofilm of substances, justifying the nature of the natural products as agents of inspiration for the detection of new compounds with the biological function.

Inhibitory effects of Morus nigra L. (Moraceae) against local paw edema and mechanical hypernociception induced by Bothrops jararacussu snake venom in mice.

BACKGROUND: Bothropic venoms cause intense local damage, pain, edema, and myonecrosis. Morus nigra L. (Moraceae) has several uses in folk medicine and can be a promising candidate for the treatment of several inflammatory disorders. HYPOTHESIS/PURPOSE: The present study aims to evaluate the anti-inflammatory and antinociceptive effects of the ethanolic extract of Morus nigra L. (Mn-EtOH) on paw lesions induced by Bothrops jararacussu snake venom (BjcuV) in mice. METHODS: UV-vis absorption of BjcuV was evaluated. A phytochemical study was performed, which led to the isolation and characterization of three compounds. These compounds were identified using spectrometric methods, namely LC-MS and NMR (1D and 2D), followed by the validation of their spectra with the data available in the literature. Further, the flavonoids i.e. rutin and quercetin (chemical markers of M. nigra), Mn-EtOH or Mn-EtOH-encapsulated electrospun fibers of Eudragit L100 (FB/Mn-EtOH), and Mn-EtOH-encapsulated microparticles of Eudragit L100 (MP/Mn-EtOH) were evaluated, in paw edema test induced by BjcuV. RESULTS: UV-vis spectra showed the presence of phospholipases A2 as component of BjcuV. The chemical examination resulted in the isolation of ß-sitosterol, quercetin-3-O-glucopyranoside, and kaempferol-3-O-glucopyranoside. Mn-EtOH, FB/Mn-EtOH, MP/Mn-EtOH, rutin, and quercetin reduced the local edema induced by BjcuV. The Mn-EtOH also prevented edema provoked by serotonin and bradykinin. Moreover, it reduced paw edema and peritoneal leukocyte infiltration induced by carrageenan, and decreased the mechanical hypernociception of BjcuV. Mn-EtOH exerted anti-inflammatory and antinociceptive effects, possibly by the inhibition of leukocyte migration and the modulation of serotonin and bradykinin actions. This anti-inflammatory activity was maintained even upon incorporation of the M. nigra extract into the drug delivery systems (i.e., Mn-EtOH-encapsulated FBs and MPs of Eudragit L100). CONCLUSION: These results reinforce the therapeutic potential of M. nigra in the treatment of inflammatory conditions, in addition to, its role as a complementary treatment of snakebites.

A random laser based on electrospun polymeric composite nanofibers with dual-size distribution.

Electrospun fiber-based random lasers are environment-friendly flexible systems in which waveguiding/scattering processes provided by their structure with a broad distribution of diameters are essential elements to generate a suitable lasing mechanism. In this work, we prepared electrospun fibers with dual-size diameter distribution (above and below the critical value for waveguiding), allowing that both optical processes can be established in the polymer network. As a result, random laser emission was observed for the electrospun fibers presenting dual-size diameters with rhodamine 6G as the gain medium, characterizing the combination of waveguiding/scattering as an adequate condition for development of organic nanofibrous random lasers. Degradation assays were also performed in order to evaluate the prolonged use of such random laser systems.

Influence of Flavonoids on Mechanism of Modulation of Insulin Secretion.

BACKGROUND: The development of alternatives for insulin secretion control in vivo or in vitro represents an important aspect to be investigated. In this direction, natural products have been progressively explored with this aim. In particular, flavonoids are potential candidates to act as insulin secretagogue. OBJECTIVE: To study the influence of flavonoid on overall modulation mechanisms of insulin secretion. METHODS: The research was conducted in the following databases and platforms: PubMed, Scopus, ISI Web of Knowledge, SciELO, LILACS, and ScienceDirect, and the MeSH terms used for the search were flavonoids, flavones, islets of Langerhans, and insulin-secreting cells. RESULTS: Twelve articles were included and represent the basis of discussion on mechanisms of insulin secretion of flavonoids. Papers in ISI Web of Knowledge were in number of 1, Scopus 44, PubMed 264, ScienceDirect 511, and no papers from LILACS and SciELO databases. CONCLUSION: According to the literature, the majority of flavonoid subclasses can modulate insulin secretion through several pathways, in an indication that corresponding molecule is a potential candidate for active materials to be applied in the treatment of diabetes. SUMMARY: The action of natural products on insulin secretion represents an important investigation topic due to their importance in the diabetes controlIn addition to their typical antioxidant properties, flavonoids contribute to the insulin secretionThe modulation of insulin secretion is induced by flavonoids according to different mechanisms. Abbreviations used: KATP channels: ATP-sensitive K+ channels, GLUT4: Glucose transporter 4, ERK1/2: Extracellular signal-regulated protein kinases 1 and 2, L-VDCCs: L-type voltage-dependent Ca+2 channels, GLUT1: Glucose transporter 1, AMPK: Adenosine monophosphate-activated protein kinase, PTP1B: Protein tyrosine phosphatase 1B, GLUT2: Glucose transporter 2, cAMP: Cyclic adenosine monophosphate, PKA: Protein kinase A, PTK: Protein tyrosine kinase, CaMK II: Ca2+/calmodulin-dependent protein kinase II, GSIS: Glucose-stimulated insulin secretion, Insig-1: Insulin-induced gene 1, IRS-2: Insulin receptor substrate 2, PDX-1: Pancreatic and duodenal homeobox 1, SREBP-1c: Sterol regulatory element binding protein-1c, DMC: Dihydroxy-6'-methoxy-3',5'-dimethylchalcone, GLP-1: Glucagon-like peptide-1, GLP-1R: Glucagon-like peptide 1 receptor.

Fabrication of Highly Flexible Hierarchical Polypyrrole/Carbon Nanotube on Eggshell Membranes for Supercapacitors.

Flexible batteries and supercapacitors (SCs) are expected to play a crucial role in energy storage and management in portable electronic devices. In addition, use of materials based on renewable resources would allow for more affordable and sustainable gadgets. In this context, eggshell membranes (ESMs) represent a promising functional platform for production of high-performance electronic components. In this work, we use ESMs for preparing flexible SCs through the incorporation of carbon nanotubes and subsequent in situ polymerization of polypyrrole, producing a highly conductive nanostructure characterized by a porous surface that exhibits both faradic and nonfaradic mechanisms for charge storage. We have found that by controlling the conducting polymer/carbon derivative relative concentration, one can maximize the corresponding capacitance to attain values up to the order 564.5 mF/cm2 (areal capacitance), 24.8 F/cm3 (volumetric capacitance), and 357.9 F/g (gravimetric capacitance). These bioinspired flexible devices exhibit a capacitance retention of 60% after 4000 cycles of charge/discharge and present negligible aging even after 500 bending repetitions (at a density of current 5 mA/cm2). The successful use of ESM-based electrodes in association with carbon derivatives/conducting polymers confirm that the exploit of biological materials offers a promising perspective for the development of new ecofriendly electronic devices.