Bioactive nanocomposite hydrogel enhances postoperative immunotherapy and bone reconstruction for osteosarcoma treatment.

Osteosarcoma, a malignant bone tumor often characterized by high hedgehog signaling activity, residual tumor cells, and substantial bone defects, poses significant challenges to both treatment response and postsurgical recovery. Here, we developed a nanocomposite hydrogel for the sustained co-delivery of bioactive magnesium ions, anti-PD-L1 antibody (αPD-L1), and hedgehog pathway antagonist vismodegib, to eradicate residual tumor cells while promoting bone regeneration post-surgery. In a mouse model of tibia osteosarcoma, this hydrogel-mediated combination therapy led to remarkable tumor growth inhibition and hence increased animal survival by enhancing the activity of tumor-suppressed CD8+ T cells. Meanwhile, the implanted hydrogel improved the microenvironment of osteogenesis through long-term sustained release of Mg2+, facilitating bone defect repair by upregulating the expression of osteogenic genes. After 21 days, the expression levels of ALP, COL1, RUNX2, and BGLAP in the Vis-αPD-L1-Gel group were approximately 4.1, 5.1, 5.5, and 3.4 times higher than those of the control, respectively. We believe that this hydrogel-based combination therapy offers a potentially valuable strategy for treating osteosarcoma and addressing the tumor-related complex bone diseases.

Photothermal switch by gallic acid-calcium grafts synthesized by coordination chemistry for sequential treatment of bone tumor and regeneration.

The residual bone tumor and defects which is caused by surgical therapy of bone tumor is a major and important problem in clinicals. And the sequential treatment for irradiating residual tumor and repairing bone defects has wildly prospects. In this study, we developed a general modification strategy by gallic acid (GA)-assisted coordination chemistry to prepare black calcium-based materials, which combines the sequential photothermal therapy of bone tumor and bone defects. The GA modification endows the materials remarkable photothermal properties. Under the near-infrared (NIR) irradiation with different power densities, the black GA-modified bone matrix (GBM) did not merely display an excellent performance in eliminating bone tumor with high temperature, but showed a facile effect of the mild-heat stimulation to accelerate bone regeneration. GBM can efficiently regulate the microenvironments of bone regeneration in a spatial-temporal manner, including inflammation/immune response, vascularization and osteogenic differentiation. Meanwhile, the integrin/PI3K/Akt signaling pathway of bone marrow mesenchymal stem cells (BMSCs) was revealed to be involved in the effect of osteogenesis induced by the mild-heat stimulation. The outcome of this study not only provides a serial of new multifunctional biomaterials, but also demonstrates a general strategy for designing novel blacked calcium-based biomaterials with great potential for clinical use.

Histomorphometric Study of Non-critical Bone Defect Repair after Implantation of Magnesium-substituted Hydroxyapatite Microspheres.

Objective The present study aims to analyze histomorphometrically the repair of a non-critical bone defect after implantation of hydroxyapatite (HA) microspheres substituted by magnesium (Mg). Methods Thirty rats were distributed into 3 experimental groups, evaluated at 15 and 45 days postoperatively: HAG (bone defect filled with HA microspheres); HAMgG (bone defect filled with HA microspheres replaced with 1 mol% Mg), and CG (bone defect without implantation of biomaterials). Results After 15 days, the biomaterials filled the entire defect extent, forming a new osteoid matrix between the microspheres. In the CG, this neoformation was restricted to the edges with the deposition of loose connective tissue with reduced thickness. At 45 days, new bone formation filled almost the entire extension of the bone defect in the 3 groups, with statistically significant osteoid deposition in the CG despite the reduced thickness compared with the HAG and HAMgG. The groups with biomaterial implantation displayed a more abundant osteoid matrix than at 15 days. Conclusion The biomaterials studied showed biocompatibility, osteoconductivity, and bioactivity. The Mg concentration in the substituted HA did not stimulate more significant bone formation than HA without this ion.

Comparison of Bone Graft Preparations to Treat a Critical Bone Defect on a Rodent Animal Model.

Objective Although autologous bone grafting is the most widely used treatment for bone defects, the most effective preparation remains unclear. This animal study aimed to compare different autologous bone grafting preparation for the treatment of rat́s calvaria critical bone defect. Methods 122 rats were randomly allocated into three groups: Simulado, Macerated and Chopped. The specimens underwent craniotomies at the top center of their calvarias with a 7mm diameter circumferential cutter drill. The critical bone defect produced was treated or not according to the group the specimen wasallocated. The rats were euthanized at 3, 6 or 12 weeks post-op and its calvarias were analyzed by histomorphometry, bone densitometry, nanocomputed tomography (nCT), and biomechanical tests. Results The histomorphometry analysis showed the highest percentage of fulfillment of the critical bone defect in the chopped and macerated group when compared to simulado. The densitometry assessment evidenced higher bone mass at all endpoints analysis (p < 0.05) in the chopped group. The nCT data exhibited an expressive increase of bone in the chopped group when compared with the simulado and macerated groups. The biomechanical tests exhibited highest values of deformation, maximum force, and relative stiffness in the chopped group at any time of euthanasia (p < 0.05). Conclusions Our experimental work showed that chopped bone grafting preparation exhibited significant better outcomes than macerated in the treatment of a critical bone defect in rat́s calvaria.

Secured Anatomy-driven Flap Extension (SAFE) for Guided Bone Regeneration: A Modified Flap Release Technique Description and Retrospective Study.

INTRODUCTION: Current flap-releasing designs for guided bone regeneration (GBR) emphasize preserving subperiosteal microvasculature by adapting a deep slit approach, separating theperiosteum from the flap. While biologically sound, a biomechanical disadvantage may be encountered. This study aimed to describe a modified design, the Secured Anatomy-driven Flap Extension (SAFE) technique, for effective facial flap release and to preliminarily evaluate the clinical outcomes of this technique retrospectively. MATERIALS AND METHODS: Chart reviews were conducted to identify patients treated by facial flap release in staged GBR procedures between May 2020 and March 2022. The anatomical, biological, and biomechanical rationale of this technique were described. The following clinical data were collected: intraoperative and postoperative complications, initial and final horizontal ridge width before and 5-6 months after the GBR, and implant performance. RESULTS: A total of 10 patients were identified. At baseline, these patients presented with a mean ridge width of 2.05 ± 0.52 mm. No intraoperative and postoperative complications were observed in these patients (bleeding, wound opening, neurosensory disturbance, etc.) at the 2-3-week follow-up visit. At the re-entry, a mean ridge width of 6.50 ± 0.55 mm was measured (p < 0.01), resulting in a mean of 4.45 ± 0.65 mm ridge width gain. Twenty-one implants were successfully placed, integrated, and in function without signs/symptoms of peri-implantitis after a mean 21.5 ± 9.2 months follow-up period. CONCLUSION: Preliminary results suggest that the SAFE technique is a safe and predictable approach for releasing facial flaps during GBR procedures.

Metabolically activated energetic materials mediate cellular anabolism for bone regeneration.

The understanding of cellular energy metabolism activation by engineered scaffolds remains limited, posing challenges for therapeutic applications in tissue regeneration. This study presents biosynthesized poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] and its major degradation product, 3-hydroxybutyrate (3HB), as endogenous bioenergetic fuels that augment cellular anabolism, thereby facilitating the progression of human bone marrow-derived mesenchymal stem cells (hBMSCs) towards osteoblastogenesis. Our research demonstrated that 3HB markedly boosts in vitro ATP production, elevating mitochondrial membrane potential and capillary-like tube formation. Additionally, it raises citrate levels in the tricarboxylic acid (TCA) cycle, facilitating the synthesis of citrate-containing apatite during hBMSCs osteogenesis. Furthermore, 3HB administration significantly increased bone mass in rats with osteoporosis induced by ovariectomy. The findings also showed that P(3HB-co-4HB) scaffold substantially enhances long-term vascularized bone regeneration in rat cranial defect models. These findings reveal a previously unknown role of 3HB in promoting osteogenesis of hBMSCs and highlight the metabolic activation of P(3HB-co-4HB) scaffold for bone regeneration.

Osteogenic potentials in canine mesenchymal stem cells: unraveling the efficacy of polycaprolactone/hydroxyapatite scaffolds in veterinary bone regeneration.

BACKGROUND: The integration of stem cells, signaling molecules, and biomaterial scaffolds is fundamental for the successful engineering of functional bone tissue. Currently, the development of composite scaffolds has emerged as an attractive approach to meet the criteria of ideal scaffolds utilized in bone tissue engineering (BTE) for facilitating bone regeneration in bone defects. Recently, the incorporation of polycaprolactone (PCL) with hydroxyapatite (HA) has been developed as one of the suitable substitutes for BTE applications owing to their promising osteogenic properties. In this study, a three-dimensional (3D) scaffold composed of PCL integrated with HA (PCL/HA) was prepared and assessed for its ability to support osteogenesis in vitro. Furthermore, this scaffold was evaluated explicitly for its efficacy in promoting the proliferation and osteogenic differentiation of canine bone marrow-derived mesenchymal stem cells (cBM-MSCs) to fill the knowledge gap regarding the use of composite scaffolds for BTE in the veterinary orthopedics field. RESULTS: Our findings indicate that the PCL/HA scaffolds substantially supported the proliferation of cBM-MSCs. Notably, the group subjected to osteogenic induction exhibited a markedly upregulated expression of the osteogenic gene osterix (OSX) compared to the control group. Additionally, the construction of 3D scaffold constructs with differentiated cells and an extracellular matrix (ECM) was successfully imaged using scanning electron microscopy. Elemental analysis using a scanning electron microscope coupled with energy-dispersive X-ray spectroscopy confirmed that these constructs possessed the mineral content of bone-like compositions, particularly the presence of calcium and phosphorus. CONCLUSIONS: This research highlights the synergistic potential of PCL/HA scaffolds in concert with cBM-MSCs, presenting a multidisciplinary approach to scaffold fabrication that effectively regulates cell proliferation and osteogenic differentiation. Future in vivo studies focusing on the repair and regeneration of bone defects are warranted to further explore the regenerative capacity of these constructs, with the ultimate goal of assessing their potential in veterinary clinical applications.

Hydrogel Microsphere-Encapsulated Bimetallic Nanozyme for Promoting Diabetic Bone Regeneration via Glucose Consumption and ROS Scavenging.

The healing of bone defects among diabetic patients presents a critical challenge due to the pathological microenvironment, characterized by hyperglycemia, excessive reactive oxygen species (ROS) production, and inflammation. Herein, multifunctional composite microspheres, termed GMAP are developed, using a microfluidic technique by incorporating Au@Pt nanoparticles (NPs) and GelMA hydrogel to modulate the diabetic microenvironment for promoting bone regeneration. The GMAP enables the sustained release of Au@Pt NPs, which function as bimetallic nanozymes with dual enzyme-like activities involving glucose oxidase and catalase. The synergistic effect allows for efficient glucose consumption and ROS elimination concurrently. Thus, the GMAP effectively protects the proliferation of bone marrow mesenchymal stem cells (BMSCs) under adverse high-glucose conditions. Furthermore, it also promotes the osteogenic differentiation and paracrine capabilities of BMSCs, and subsequently inhibits inflammation and enhances angiogenesis. In vivo diabetic rats bone defect model, it is demonstrated that GMAP microspheres significantly improve bone regeneration, as verified by micro-computed tomography and histological examinations. This study provides a novel strategy for bone regeneration by modulating the diabetic microenvironment, presenting a promising approach for addressing the complex challenges associated with bone healing in diabetic patients.

An Engineered Hierarchical Hydrogel with Immune Responsiveness and Targeted Mitochondrial Transfer to Augmented Bone Regeneration.

Coordinating the immune response and bioenergy metabolism in bone defect environments is essential for promoting bone regeneration. Mitochondria are important organelles that control internal balance and metabolism. Repairing dysfunctional mitochondria has been proposed as a therapeutic approach for disease intervention. Here, an engineered hierarchical hydrogel with immune responsiveness can adapt to the bone regeneration environment and mediate the targeted mitochondria transfer between cells. The continuous supply of mitochondria by macrophages can restore the mitochondrial bioenergy of bone marrow mesenchymal stem cells (BMSC). Fundamentally solving the problem of insufficient energy support of BMSCs caused by local inflammation during bone repair and regeneration. This discovery provides a new therapeutic strategy for promoting bone regeneration and repair, which has research value and practical application prospects in the treatment of various diseases caused by mitochondrial dysfunction.

Introduction and overview on autogenous Platelet concentrates.

This special issue on autologous platelet concentrates (APCs) provides clinicians with an overview on the current understanding of the use of these biomaterials for soft and hard-tissue regeneration. The included papers summarize scientific evidence and the clinical findings, presented in simple tables that outline potential benefits including Patient Reported Outcome Measures (PROMs). This approach enables clinicians to assess clinical relevance and researchers to identify significant gaps in the literature. The first part provides a comprehensive summary of the basic science surrounding APC, with particular focus on their preparation methods. Clear recommendations are outlined, which are crucial for obtaining high-quality APCs, alongside an exploration of how APCs may influence both soft and hard tissue healing processes. Part 2 delves into the clinical evidence for the potential benefits of APCs across a range of applications: alveolar ridge preservation, sinus floor elevation, periodontal plastic surgery, guided tissue regeneration, guided bone regeneration, the healing of Medication-Related Osteonecrosis of the Jaw (MRONJ), and endodontic surgery. In the part 3, the discussion turns to the effects of APCs on the healing of extra-oral wounds, including diabetic foot ulcers, venous leg ulcers, pressure injuries, burns, and more. For those clinicians persuaded by the evidence, the fourth section offers a detailed, step-by-step flowchart for each treatment modality, providing a clear guide for clinical application.

The Treatment of Very Large Traumatic Bone Defects of the Tibia With a Polycaprolactone-Tricalcium Phosphate 3D-Printed Cage: A Review of Three Cases.

The need for an artificial scaffold in very large bone defects is clear, not only to limit the risk of graft harvesting but also to improve clinical success. The use of custom osteoconductive scaffolds made from biodegradable polyester and ceramics can be a valuable patient-friendly option, especially in case of a concomitant infection. Multiple types of scaffolds for the Masquelet procedure (MP) are available. However, these frequently demonstrate central graft involution when defects exceed a certain size and the complication rates remain high. This paper describes three infected tibial defect nonunions with a segmental defect over 10 centimeters long treated with a three-dimensional (3D)-printed polycaprolactone-tricalcium phosphate (PCL-TCP) cage in combination with biological adjuncts. Three male patients, between the ages of 37 and 47, were treated for an infected tibial defect nonunion after sustaining Gustilo grade 3 open fractures. All had a segmental midshaft bone defect of more than 10 centimeters (range 11-15cm). First-stage MPs consisted of extensive debridement, external fixation, and placement of anterior lateral thigh flaps. Positive cultures were obtained from all patients during this first stage, which were treated with specific systemic antibiotics for 12 weeks. The second-stage MP was carried out at least two months after the first stage. CT scans were obtained after the first stage to manufacture defect-specific cages. In the final procedure, a custom 3D-printed PCL-TCP cage (Osteopore, Singapore) was placed in the defect in combination with biological adjuncts (BMAC, RIA-derived autograft, iFactor, and BioActive Glass). Bridging of the defect, assessed at six months by CT, was achieved in all cases. SPECT scans six months post-operatively demonstrated active bone regeneration, also involving the central part of the scaffold. All three patients regained function and reported less pain with full weight bearing. This case report shows that 3D-printed PCL-TCP cages in combination with biological adjuncts are a novel addition to the surgical treatment of very large bone defects in (infected) post-traumatic nonunion of the tibia. This combination could overcome some of the current drawbacks in this challenging indication.

Cu/Gd co-doped hydroxyapatite/poly lactic-co-glycolic acid composites enhance MRI imaging and bone defect regeneration.

Background: The hydroxyapatite (HA)/poly(lactide-co-glycolide) acid (PLGA) composite material is a widely used orthopedic implant due to its excellent biocompatibility and plasticity. Recent advancements in cation doping have expanded its potential biological applications. However, conventional HA/PLGA composites are not visible under X-rays post-implantation and have limited osteogenic induction capabilities. Copper (Cu) is known to regulate osteoblast proliferation and differentiation, while gadolinium (Gd) can significantly enhance the magnetic resonance imaging (MRI) capabilities of materials. Methods: This study aimed to investigate whether incorporating Cu and Gd into an HA/PLGA composite could enhance the osteogenic properties, in vivo bone defect repair, and MRI characteristics. We prepared a Cu/Gd@HA/PLGA composite and assessed its performance. Results: Material characterization confirmed that Cu/Gd@HA retained the morphology and crystal structure of HA. The Cu/Gd@HA/PLGA composite exhibited excellent nuclear magnetic imaging capabilities, porosity, and hydrophilicity, which are conducive to cell adhesion and implant detection. In vitro experiments demonstrated that the Cu/Gd@HA/PLGA composite enhanced the proliferation, differentiation, and adhesion of MC3T3-E1 cells, and upregulated COL-1 and BMP-2 expression at both gene and protein levels. In vivo studies showed that the Cu/Gd@HA/PLGA composite maintained strong T1-weighted MRI signals and significantly improved the bone defect healing rate in rats. Conclusion: These findings indicate that the Cu/Gd@HA/PLGA composites significantly enhance T1-weighted MRI capabilities, promote osteoblast proliferation and differentiation in vitro, and accelerate bone defect healing in vivo.

Dihydromyricetin-loaded oxidized polysaccharide/L-arginine chitosan adhesive hydrogel promotes bone regeneration by regulating PI3K/AKT signaling pathway and MAPK signaling pathway.

Bone defects caused by trauma, infection and congenital diseases still face great challenges. Dihydromyricetin (DHM) is a kind of flavone extracted from Ampelopsis grossedentata, a traditional Chinese medicine. DHM can enhance the osteogenic differentiation of human bone marrow mesenchymal stem cells with the potential to promote bone regeneration. Hydrogel can be used as a carrier of DHM to promote bone regeneration due to its unique biochemical characteristics and three-dimensional structure. In this study, oxidized phellinus igniarius polysaccharides (OP) and L-arginine chitosan (CA) are used to develop hydrogel. The pore size and gel strength of the hydrogel can be changed by adjusting the oxidation degree of oxidized phellinus igniarius polysaccharides. The addition of DHM further reduce the pore size of the hydrogel (213 µm), increase the mechanical properties of the hydrogel, and increase the antioxidant and antibacterial activities of the hydrogel. The scavenging rate of DPPH are 72.30 ± 0.33 %, and the inhibition rate of E.coli and S.aureus are 93.12 ± 0.38 % and 94.49 ± 1.57 %, respectively. In addition, PCAD has good adhesion and biocompatibility, and its extract can effectively promote the osteogenic differentiation of MC3T3-E1 cells. Network pharmacology and molecular docking show that the promoting effect of DHM on osteogenesis may be achieved by activating the PI3K/AKT and MAPK signaling pathways. This is confirmed through in vitro cell experiments and in vivo animal experiments.

Macrophage-Centric Biomaterials for Bone Regeneration in Diabetes Mellitus: Contemporary Advancements, Challenges, and Future Trajectories.

Increased susceptibility to bone fragility and the diminution of bone regenerative capacity are recognized as significant and frequent sequelae of diabetes mellitus. Research has elucidated the pivotal role of macrophages in the pathogenesis and repair of diabetic bone defects. Notwithstanding this, the therapeutic efficacy of traditional interventions remains predominantly inadequate. Concomitant with substantial advancements in tissue engineering in recent epochs, there has been an escalation in the development of biomaterials designed to modulate macrophage activity, thereby augmenting osseous tissue regeneration in the context of hyperglycemia. This review amalgamates insights from extant research and delineates recent progressions in the domain of biomaterials that target macrophages for the regeneration of diabetic bone, whilst also addressing the clinical challenges and envisaging future directions within this field.

Guided bone regeneration at dehiscence comparing synthetic bone substitute versus bovine bone mineral: A multicenter, noninferiority, randomized trial.

AIM: To evaluate the efficacy of guided bone regeneration (GBR) for the treatment of peri-implant dehiscence defects using a synthetic bone substitute (SBS) or a deproteinized bovine bone mineral (DBBM) as a bone substitute. METHODS: Patients with expected dehiscence defects following implant placement were randomized to use either SBS or DBBM together with a bioabsorbable collagen membrane over dehiscenced implant surfaces aimed for GBR. The changes in the bone defect size were measured before the GBR procedure and 6 months after implant placement at the re-entry surgery. Secondary outcomes included peri-implant health outcomes, implant cumulative survival rates, bone level changes, and patient-reported outcomes (PROMs) at prosthesis delivery and 1-year follow-up. RESULTS: Of the 49 included patients, 24 were treated with SBS and 25 with DBBM. In the SBS group, the defect height (DH) at implant insertion was 5.1 ± 2.6 mm and was reduced at re-entry to 1.3 ± 2.0 mm (74.5%). In the DBBM group, the respective changes in DH were 4.1 ± 1.7 mm and 1.5 ± 1.9 mm (63.4%). These differences were not statistically significant (p = 0.216). The complete defect resolution rate was also comparable in both groups without statistical difference (62.5% of patients (15/24) vs. 44% of patients (11/25)). Overall, the marginal bone levels remained stable during the 1-year follow-up in both groups. CONCLUSION: The SBS is noninferior to DBBM for simultaneous GBR to implant placement at implant sites with buccal dehiscences in terms of defect resolution and evaluated secondary outcomes (KCT0008393 - this clinical trial was not registered before participant recruitment and randomization).

Potential plausible role of Wharton's jelly mesenchymal stem cells for diabetic bone regeneration.

This letter addresses the review titled "Wharton's jelly mesenchymal stem cells: Future regenerative medicine for clinical applications in mitigation of radiation injury". The review highlights the regenerative potential of Wharton's jelly mesenchymal stem cells (WJ-MSCs) and describes why WJ-MSCs will become one of the most probable stem cells for future regenerative medicine. The potential plausible role of WJ-MSCs for diabetic bone regeneration should be noticeable, which will provide a new strategy for improving bone regeneration under diabetic conditions.

Meticulously engineered three-dimensional-printed scaffold with microarchitecture and controlled peptide release for enhanced bone regeneration.

The repair of large load-bearing bone defects requires superior mechanical strength, a feat that a single hydrogel scaffold cannot achieve. The objective is to seamlessly integrate optimal microarchitecture, mechanical robustness, vascularisation, and osteoinductive biological responses to effectively address these critical load-bearing bone defects. To confront this challenge, three-dimensional (3D) printing technology was employed to prepare a polycaprolactone (PCL)-based integrated scaffold. Within the voids of 3D printed PCL scaffold, a methacrylate gelatin (GelMA)/methacrylated silk fibroin (SFMA) composite hydrogel incorporated with parathyroid hormone (PTH) peptide-loaded mesoporous silica nanoparticles (PTH@MSNs) was embedded, evolving into a porous PTH@MSNs/GelMA/SFMA/PCL (PM@GS/PCL) scaffold. The feasibility of fabricating this functional scaffold with a customised hierarchical structure was confirmed through meticulous chemical and physical characterisation. Compression testing unveiled an impressive strength of 17.81 ± 0.83 MPa for the composite scaffold. Additionally, in vitro angiogenesis potential of PM@GS/PCL scaffold was evaluated through Transwell and tube formation assays using human umbilical vein endothelium, revealing the superior cell migration and tube network formation. The alizarin red and alkaline phosphatase staining assays using bone marrow-derived mesenchymal stem cells clearly illustrated robust osteogenic differentiation properties within this scaffold. Furthermore, the bone repair potential of the scaffold was investigated on a rat femoral defect model using micro-computed tomography and histological examination, demonstrating enhanced osteogenic and angiogenic performance. This study presents a promising strategy for fabricating a microenvironment-matched composite scaffold for bone tissue engineering, providing a potential solution for effective bone defect repair.

Barrier Membrane with Janus Function and Structure for Guided Bone Regeneration.

Guided bone regeneration (GBR) technology has been demonstrated to be an effective method for reconstructing bone defects. A membrane is used to cover the bone defect to stop soft tissue from growing into it. The biosurface design of the barrier membrane is key to the technology. In this work, an asymmetric functional gradient Janus membrane was designed to address the bidirectional environment of the bone and soft tissue during bone reconstruction. The Janus membrane was simply and efficiently prepared by the multilayer self-assembly technique, and it was divided into the polycaprolactone isolation layer (PCL layer, GBR-A) and the nanohydroxyapatite/polycaprolactone/polyethylene glycol osteogenic layer (HAn/PCL/PEG layer, GBR-B). The morphology, composition, roughness, hydrophilicity, biocompatibility, cell attachment, and osteogenic mineralization ability of the double surfaces of the Janus membrane were systematically evaluated. The GBR-A layer was smooth, dense, and hydrophobic, which could inhibit cell adhesion and resist soft tissue invasion. The GBR-B layer was rough, porous, hydrophilic, and bioactive, promoting cell adhesion, proliferation, matrix mineralization, and expression of alkaline phosphatase and RUNX2. In vitro and in vivo results showed that the membrane could bind tightly to bone, maintain long-term space stability, and significantly promote new bone formation. Moreover, the membrane could fix the bone filling material in the defect for a better healing effect. This work presents a straightforward and viable methodology for the fabrication of GBR membranes with Janus-based bioactive surfaces. This work may provide insights for the design of biomaterial surfaces and treatment of bone defects.

Tailoring surface stiffness to modulate senescent macrophage immunomodulation: Implications for osteo-/angio-genesis in aged bone regeneration.

The application of biomaterials in bone regeneration is a prevalent clinical practice. However, its efficacy in elderly patients remains suboptimal, necessitating further advancements. While biomaterial properties are known to orchestrate macrophage (MΦ) polarization and local immune responses, the role of biomaterial cues, specifically stiffness, in directing the senescent macrophage (S-MΦ) is still poorly understood. This study aimed to elucidate the role of substrate stiffness in modulating the immunomodulatory properties of S-MΦ and their role in osteo-immunomodulation. Our results demonstrated that employing collagen-coated polyacrylamide hydrogels with varying stiffness values (18, 76, and 295 kPa) as model materials, the high-stiffness hydrogel (295 kPa) steered S-MΦs towards a pro-inflammatory M1 phenotype, while hydrogels with lower stiffness (18 and 76 kPa) promoted an anti-inflammatory M2 phenotype. The immune microenvironment created by S-MΦs promoted the bioactivities of senescent endothelial cells (S-ECs) and senescent bone marrow mesenchymal stem cells BMSCs (S-BMSCs). Furthermore, the M2 S-MΦs, particularly incubated on the 76 kPa hydrogel matrices, significantly enhanced the ability of angiogenesis of S-ECs and osteogenic differentiation of S-BMSCs, which are crucial and interrelated processes in bone healing. This modulation aided in reducing the accumulation of reactive oxygen species in S-ECs and S-BMSCs, thereby significantly contributing to the repair and regeneration of aged bone tissue.

Investigation of the extent of post-extraction bone contraction and bone remodeling after 4 months. A prospective pilot study.

OBJECTIVES: Aim was to investigate a correlation between the serum levels of 25(OH)D and the resorption of the alveolar bone walls and regeneration of the alveolar space after tooth extractions. METHODS: 14 adults in need of extraction of hopeless teeth were enrolled. An intraoral digital impression was performed using CS3600 scanner, and each patient was tested to assess serum vitamin D levels. Subsequently, extraction of teeth and contextual guided bone regeneration was performed using porcine origin graft material and a resorbable collagen membrane to covert the defect. After 4 months, an impression was taken, and the model was scanned using a professional scanner for lab. At the same time, a CBCT exam was performed to perform implant insertion through fully digital computer guided surgery. Bone was collected to perform histological and histomorphometric analysis. Pre and postoperative scans were compared using a specific software GOM Inspect, GOM GmbH, Germany) to estimate the volumetric changes. GLM tests were applied to investigate the relationship between the different predictor variables and the outcome variables. RESULTS: 14 patients were divided in 3 groups depending on the serum Vit-D levels, identifying three ranges corresponding to low (lower than 20), medium (between 20-30), and optimal vitamin D levels (higher than 30). Volumetric contraction after extraction was observed for all patients without any significant difference. Focusing on the post-extraction regeneration, patients belonging to the group with lower levels of Vit-D displayed lower and more disorganized levels of bone. Immunohistochemistry analysis showed that Col1A1 and Osteocalcin had no physiological alteration. Osteopontin could be identified near the external surface of bone tissue granules. Runx2 signals were detected near the margins of bone trabeculae. CONCLUSIONS: Serum vit-D levels do not appear to influence the extent of post-extraction bone contraction. On the contrary, it seems to significantly influence the post-extraction regeneration. CLINICAL SIGNIFICANCE: Vit D serum levels may influence the regenerative aspect during post-extraction turn-over. This might suggest controlling and (in case of low levels) recommend Vit D supplement in the patient diet in case of extraction.