A comprehensive strategy based on ultra-high performance liquid chromatography with diode array detector fingerprinting and multi-component ultra-performance liquid chromatography with tandem mass spectrometry technology for quality control of Jiawei Huoxiang Zhengqi Pill.

Jiawei Huoxiang Zhengqi Pill (JHZP) is a commonly used Chinese patent medicine for the clinical treatment of headache, dizziness, chest tightness as well as abdominal distension, and pain caused by wind-cold flu. In this study, a comprehensive strategy combining ultra-high performance liquid chromatography with diode array detector (UHPLC-DAD) fingerprinting and multi-component quantitative analysis was established and validated for quality evaluation of JHZP. A total of 49 characteristic common peaks were selected in a chromatographic fingerprinting study to assess the similarity of 15 batches of JHZP. Furthermore, 109 compounds were identified or preliminarily identified from JHZP by coupling with an advanced hybrid linear ion trap-Orbitrap mass spectrometer. For quantification, the optimized ultra-performance liquid chromatography with tandem mass spectrometry (UPLC-MS/MS) method was employed for the simultaneous determination of 13 target compounds within 12 min. The sensitivity, precision, reproducibility, and accuracy of the method were satisfactory. This validated UPLC-MS/MS method was successfully applied to analyzing 15 batches of JHZP. The proposed comprehensive strategy combining UHPLC-DAD fingerprinting and multi-component UPLC-MS/MS analysis proved to be highly efficient, accurate, and reliable for the quality evaluation of JHZP, which can be considered as a reference for the overall quality evaluation of other Chinese herbal formulations.

Safety profiling of technical lignins originating from various bioresources and conversion processes.

In this work, a set of eight technical lignin samples from various botanical origins and production processes were characterized for their chemical composition, higher heating value, size distribution, dust explosion sensitivity and severity, thermal hazard characteristics and biodegradability, in further support of their sustainable use. More specifically, safety-focused parameters have been assessed in terms of consistency with relating physico-chemical properties determined for the whole set of technical lignins. The results emphasized the heterogeneity and variability of technical lignins and the subsequent need for a comprehensive characterization of new lignin feedstocks arising from novel biorefineries. Indeed, significant differences were revealed between the samples in terms of hazards sensitivity. This first comparative physico-chemical safety profiling of technical lignins could be useful for the hazard analysis and the safe design of the facilities associated with large scale valorisation of biomass residues such as lignins, targeting "zero waste" sustainable conversion of bioresources.

A study on anticancer and antioxidant ability of selected brown algae biomass yielded polysaccharide and their chemical and structural properties analysis by FT-IR and NMR analyses.

The study was conducted to determine the chemical and structural properties of polysaccharides extracted from the marine macroalgae Nemalion cari-cariense. Furthermore, evaluate the anticancer and free radical scavenging activity of purified N. cari-cariense polysaccharide. Approximately 41.6% (w/w) of crude polysaccharide was extracted from N. cari-cariense macroalgae biomass. After deproteinization, the purified polysaccharide's major chemical composition was found to be 92.6%, with all protein content removed. The purified polysaccharide had ash and moisture % of 23.01% and 4.03%, respectively. The C, H, and N of the test polysaccharide were analyzed using GC-MS, with results of 39.21%, 5.87%, and 4.29%, respectively. Furthermore, this analysis also revealed the monosaccharide composition such as glucose, galactose, mannose, xylose, and rhamnose glucose, galactose, mannose, xylose, and rhamnose 54.62%, 29.64%, 2.8%, 5.9%, and 6.8% respectively. The molecular weight of purified polysaccharide was found as 49kDa through PAGE analysis. The FT-IR analysis revealed that the presence of functional groups exactly attributed to polysaccharide and 1H and 13C-NMR analyses confirmed the structural properties of N. cari-cariense polysaccharide. The free radicals scavenging ability of purified N. cari-cariense polysaccharide was investigated by various assays such as total antioxidant assay (22.3%-72.5% at 50-250 µg mL-1), DPPH assay (23.6% to 76.9% at 10 to 160 µg mL-1), OH radical scavenging assay (13.6% to 70.2% at 50-250 µg mL-1 dosage, and SO radical scavenging assay (27.6-68.41% at 50-250 µg mL-1 concentration). The polysaccharide demonstrated 82.63% anticancer activity towards the A549 lung cancer cell line at 1000 µg mL-1 dosage. The findings suggest that this polysaccharide has biological applications.

Annual variation of source contributions to PM10 and oxidative potential in a mountainous area with traffic, biomass burning, cement-plant and biogenic influences.

Toxicity of particulate matter (PM) depends on its sources, size and composition. We identified PM10 sources and determined their contribution to oxidative potential (OP) as a health proxy for PM exposure in an Alpine valley influenced by cement industry. PM10 filter sample chemical analysis and equivalent black carbon (eBC) were measured at an urban background site from November 2020 to November 2021. Using an optimized Positive Matrix Factorization (PMF) model, the source chemical fingerprints and contributions to PM10 were determined. The OP assessed through two assays, ascorbic acid (AA) and dithiothreitol (DTT), was attributed to the PM sources from the PMF model with a multiple linear regression (MLR) model. Ten factors were found at the site, including biomass burning (34, 40 and 38% contribution to annual PM10, OPAA and OPDDT, respectively), traffic (14, 19 and 7%), nitrate- and sulphate-rich (together: 16, 5 and 8%), aged sea salt (2, 2 and 0%) and mineral dust (10, 12 and 17%). The introduction of innovative organic tracers allowed the quantification of the PM primary and secondary biogenic fractions (together: 13, 8 and 21%). In addition, two unusual factors due to local features, a chloride-rich factor and a second mineral dust-rich factor (named the cement dust factor) were found, contributing together 10, 14 and 8%. We associate these two factors to different processes in the cement plant. Despite their rather low contribution to PM10 mass, these sources have one of the highest OPs per µg of source. The results of the study provide vital information about the influence of particular sources on PM10 and OP in complex environments and are thus useful for PM control strategies and actions.

Characterization and biological activities of a novel exopolysaccharide produced from Geobacillus thermodenitrificans HBB 111 strain.

In this study, EPS production conditions of Geobacillus thermodenitrificans HBB 111, a thermophilic microorganism, were optimized and the amount of produced EPS (EPS 111) was found to be 44.0 mg/L. EPS 111 was purified using ion exchange chromatography and gel filtration chromatography, and a single type of exopolysaccharide was obtained. The structure of the purified EPS 111 was evaluated by TLC, FTIR, NMR, and GC-MS, and it was observed that it contained hexose (glucose, fructose, galactose and mannose) and pentose sugars. From the SEM photographs, it was understood that EPS 111 had an amorphous, rough, and layered structure. It was found that purified EPS 111 had low cytotoxicity (2.3%) and exhibited high antioxidant activity and remarkable antidiabetic, prebiotic and fibrinolytic activities. It is very valuable that the purified EPS 111 in this study offers multiple biological activities compared to the thermophilic EPSs reported in the literature and has a high potential for use in biotechnological and biomedical fields.

Quality of Arabica coffee grown in Brazilian Savannah and impact of potassium sources.

Located in Brazil's Central Plateau, the Cerrado Savannah is an emerging coffee-growing region with significant potential for the national coffee market. This study investigated the impact of potassium fertilization on Arabica coffee quality in the Cerrado, using three potassium sources (K2SO4, KCl, and KNO3) and five cultivars (Arara, Aranãs, IPR103, Catiguá and Topázio) across two consecutive harvests. We focused on productivity, granulometry, chemical composition, and sensory characteristics. No significant difference in productivity across the cultivars studied or potassium sources as isolated factors were observed. Regarding chemical parameters, potassium sources only affected NO3- and SO42- levels in the grains. Cultivar-specific differences were noted in caffeine (CAF), citric acid (CA), and sucrose (SUC), highlighting a strong genetic influence. K2SO4 improved productivity in Arara (15 %) and IPR103 (11 %), while KNO3 reduced flat grain percentage to 70 % in Catiguá. Sensory evaluation showed that all potassium sources and cultivars produced specialty coffees, with the Arara cultivar treated with K2SO4 achieving the highest SCA score (83.3) while IPR 103 treated with KCl scored the lowest at 78. Only three treatments were below but very close to the threshold (80). Multivariate analysis indicated a trend where specific treatments correlated with higher productivity and quality. Despite the subtle differences in productivity and quality among potassium sources, a cost-benefit analysis may favor KCl due to its affordability, suggesting its viability as a potassium fertilization option in coffee cultivation. Future research is needed to confirm these trends and optimize potassium source selection to enhance coffee quality in the Cerrado.

Pollution characteristics, source apportionment, and health risk assessment of PM10 and PM2.5 in rooftop and kerbside environment of Lanzhou, NW China.

To investigate air pollution in the kerbside environment and its associated human health risks, a study was conducted in Lanzhou during December 2018, as well as in April, June, and September 2019. The research aimed to characterize the composition of PM10 and PM2.5, including elements, ions, and carbonaceous components, at both rooftop and kerbside locations. Additionally, source apportionment and health risk assessment were conducted. The results showed that the average mass concentrations of PM10 on the rooftop were 176.01 ± 83.23 µg/m3, and for PM2.5, it was 94.07 ± 64.89 µg/m3. The PM10 and PM2.5 levels at the kerbside are 2.21 times and 1.79 times, respectively, greater than those on the rooftop. Moreover, the concentrations of elements, ions, and carbonaceous components in kerbside PM were higher than those at the rooftop location. Chemical mass closure analysis identified various sources, including organic matter, mineral dust, secondary ions, other ions, elements, and other components. In comparison to rooftop particulate matter (PM), mineral dust makes a more substantial contribution to kerbside PM. Secondary ions show an opposite trend, making a greater contribution to rooftop PM. The contribution of organic components within PM of the same particle size remains relatively consistent. The outcome of the health risk assessment indicates that Co, Cd, and As in PM within the kerbside and rooftop environments do not pose a notable carcinogenic risk. However, Al and Mn do present specific non-carcinogenic risks, particularly in the kerbside environment. Furthermore, children experience elevated non-carcinogenic risk compared to adults. These findings can serve as a scientific foundation for formulating policies within the local health department.

Immobilization of human tyrosine hydroxylase onto magnetic nanoparticles - A novel formulation of a therapeutic enzyme.

Human tyrosine hydroxylase (hTH) has key role in the production of catecholamine neurotransmitters. The structure, function and regulation of hTH has been extensively researched area and the possibility of enzyme replacement therapy (ERT) involving hTH through nanocarriers has been raised as well. However, our understanding on how hTH may interact with nanocarriers is still lacking. In this work, we attempted to investigate the immobilization of hTH on magnetic nanoparticles (MNPs) with various surface linkers in quantitative and mechanistic detail. Our results showed that the activity of hTH was retained after immobilization via secondary and covalent interactions as well. The colloidal stability of hTH could be also enhanced proved by Dynamic light scattering and Zeta potential analysis and a homogenous enzyme layer could be achieved, which was investigated by Raman mapping. The covalent attachment of hTH on MNPs via aldehyde or epoxy linkers provide irreversible immobilization and 38.1 % and 16.5 % recovery (ER). The hTH-MNPs catalyst had 25 % ER in average in simulated nasal electrolyte solution (SNES). This outcome highlights the relevance of immobilization applying MNPs as a potential formulation tool of sensitive therapeutic enzymes offering new opportunities for ERT related to neurodegenerative disorders.

Green and Low-Cost Modified Pisha Sandstone Geopolymer Gel Materials for Ecological Restoration: A Phase Review.

Pisha sandstone (PS) is a special interbedded rock in the middle reaches of the Yellow River that experiences severe weathering and is loose and broken. Due to severe multiple erosion events, the Pisha sandstone region is called "the most severe water loss and soil erosion in the world" and "the ecological cancer of the earth". As a special pozzolanic mineral, PS has the potential to be used as precursors for the synthesis of green and low-carbon geopolymer gel materials and applied in ecological restoration. This paper aims to undertake a phase review of the precursors for geopolymer gel materials. The genesis and distribution, physical and chemical characterization, erosion characteristics, and advances in the ecological restoration of PS are all summarized. Furthermore, current advances in the use of PS for the synthesis of geopolymer gel materials in terms of mechanical properties and durability are discussed. The production of Pisha sandstone geopolymer gels through the binder jetting technique and 3D printing techniques is prospected. Meanwhile, the prospects for the resource application of PS in mine rehabilitation and sustainable ecology are discussed. In the future, multifactor-driven comprehensive measures should be further investigated in order to achieve ecological restoration of the Pisha sandstone region and promote high-quality development of the Yellow River Basin.

Chemical and Bioactive Properties of Red Rice with Potential Pharmaceutical Use.

Red rice has been proposed as a super-food. Accordingly, the nutritional properties (AOAC), as well as its chemical composition, including sugars (HPLC-RI), organic acids (UFLC-PDA), tocopherols (HPLD-FD), and phenolic compounds (LC-DAD-ESI/MSn), together with the main bioactive properties (antioxidant, cytotoxic, antiproliferative, and antibacterial activities), were evaluated to access its nutritional benefits and health improvement potential. The most abundant macronutrients found were carbohydrates (87.2 g/100 g dw), proceeded by proteins (9.1 g/100 g dw), fat (2.6 g/100 g dw), and ash (1.1 g/100 g dw). Sucrose and raffinose were the only detected sugars, with sucrose presenting the maximum concentration (0.74 g/100 g dw). MUFAs and PUFAs were the predominant fatty acids (40.7% and 31%, respectively). Among the two detected tocopherol isoforms, γ-tocopherol (0.67 mg/100 g dw) predominated over α-tocopherol. The phenolic compounds profile, majorly composed of flavan-3-ols, should be associated with the detected bioactivities, which may provide biological benefits to human health beyond the primary nutritional effect. Overall, the bioactive potential of red rice was comprehensively accessed.

Advances on anticancer fungal metabolites: sources, chemical and biological activities in the last decade (2012-2023).

Among microorganisms, fungi are the ones that have the most imagination in producing secondary metabolites with the most varied structural differences, which are produced through different biosynthetic pathways. Therefore, they synthesize secondary metabolites classifiable into numerous families of natural compounds such as amino acids, alkaloids, anthraquinones, aromatic compounds, cyclohexene epoxides, furanones, macrolides, naphthoquinones, polyketides, pyrones, terpenes, etc. They also produced metabolites with very complex structures that can not be classified in the known families of natural compounds. Many fungal metabolites show different biological activities with potential applications in agriculture, food chemistry, cosmetics, pharmacology and medicine. This review is focused on the fungal secondary metabolites with anticancer activity isolated in the last ten years. For some metabolites, when described, their biosynthetic origin, the mode of action and the results of structure activity relationships studies are also reported.

Chemical Characterization of Terpene-Based Hydrophobic Eutectic Solvents and Their Application for Pb(II) Complexation during Solvent Extraction Procedure.

Solvents prepared from natural terpenes (menthol and thymol), as H-bond acceptors, and a series of organic acids (chain lengths of 8, 10, and 14 C atoms), as H-bond donors, were characterized and tested as reaction media for liquid-liquid extraction purposes. Due to their high hydrophobicity, they seem to be promising alternatives to conventional (nonpolar and toxic) solvents, since they possess relatively less toxic, less volatile, and consequently, more environmentally friendly characteristics. Assuming that the equilibrium is established between solvent and analyte during a ligandless procedure, it can be concluded that those nonpolar solvents can efficiently extract nonpolar analytes from the aqueous environment. Previous investigations showed a wide range of applications, including their use as solvents in extractions of metal cations, small molecules, and bioactive compounds for food and pharmaceutical applications. In this work, hydrophobic solvents based on natural terpenes, which showed chemical stability and desirable physicochemical and thermal properties, were chosen as potential reaction media in the liquid-liquid extraction (LLE) procedure for Pb(II) removal from aqueous solutions. Low viscosities and high hydrophobicities of prepared solvents were confirmed as desirable properties for their application. Extraction parameters were optimized, and chosen solvents were applied. The results showed satisfactory extraction efficiencies in simple and fast procedures, followed by low solvent consumption. The best results (98%) were obtained by the thymol-based solvent, thymol-decanoic acid (Thy-DecA) 1:1, followed by L-menthol-based solvents: menthol-octanoic acid (Men-OctA) 1:1 with 97% and menthol-decanoic acid (Men-DecA) 1:1 with 94.3% efficiency.

Breakthrough applications of porous organic materials for membrane-based CO2 separation: a review.

Over the last decades, porous organic materials (POMs) have been extensively employed in various industrial approaches including gas separation, catalysis and energy production due to possessing indisputable advantages like great surface area, high permeability, controllable pore size, appropriate functionalization and excellent processability compared to traditional substances like zeolites, Alumina and polymers. This review presents the recent breakthroughs in the multifunctional POMs for potential use in the membrane-based CO2 separation. Some examples of highly-selective membranes using multifunctional POMs are described. Moreover, various classifications of POMs following with their advantages and disadvantages in CO2 separation processes are explained. Apart from reviewing the state-of-the-art POMs in CO2 separation, the challenges/limitations of POMs with tailored structures for reasonable application are discussed.

Management of dredged marine sediments in Southern France: main keys to large-scale beneficial re-use.

Fifty million cubic meters of marine sediments are dredged each year in France in order to maintain harbor activities and sustain the economy of littoral territories. Because of anthropogenic activities in and around harbors, sediments can contain significant amounts of chemical and organic pollutants whose behavior during dredging must be addressed in order to avoid releasing risks for humans and the environment. French regulations come to govern the management of dredged sediments, considering them "safe" and possible to be dumped at sea or "contaminated" and needed to be treated on land as waste. In recent years, new constraints have been pushed toward the management of land. This management is, however, challenging as few channels are proposed to reuse marine sediments, and elimination appears to be economically and environmentally unsustainable. This study provides an overview of the technical and regulatory aspects related to dredged marine sediment management in France and aims to identify and discuss the limits of their valorization. Dredged sediments are mainly composed of particles with heterogeneous grain size, some being known for many applications such as building materials and growing media. However, several reasons have been put forward to explain why these particles are not reused when extracted from dredged sediments. Several technical, socio-economic, and regulatory obstacles explain the low demand for dredged sediments. This demand can be stimulated by government incentives and a good regulatory framework. National regulations could help streamline their reuse by removing their "waste" status and creating a regulated market for dredged sediment.

Phytochemical Analysis, Biological Activities, and Molecular Docking Studies of Root Extracts from Paeonia Species in Serbia.

Without being aware of their chemical composition, many cultures have used herbaceous peony roots for medicinal purposes. Modern phytopreparations intended for use in human therapy require specific knowledge about the chemistry of peony roots and their biological activities. In this study, ethanol-water extracts were prepared by maceration and microwave- and ultrasound-assisted extractions (MAE and UAE, respectively) in order to obtain bioactive molecules from the roots of Paeonia tenuifolia L., Paeonia peregrina Mill., and Paeonia officinalis L. wild growing in Serbia. Chemical characterization; polyphenol and flavonoid content; antioxidant, multianti-enzymatic, and antibacterial activities of extracts; and in vitro gastrointestinal digestion (GID) of hot water extracts were performed. The strongest anti-cholinesterase activity was observed in PT extracts. The highest anti-ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical potential was observed in PP extracts, whereas against DPPH (2,2-diphenyl-1-picrylhydrazyl radicals), the best results were achieved with PO extracts. Regarding antibacterial activity, extracts were strongly potent against Bacillus cereus. A molecular docking simulation was conducted to gather insights into the binding affinity and interactions of polyphenols and other Paeonia-specific molecules in the active sites of tested enzymes. In vitro GID of Paeonia teas showed a different recovery and behavior of the individual bioactives, with an increased recovery of methyl gallate and digallate and a decreased recovery of paeoniflorin and its derivatives. PT (Gulenovci) and PP (Pirot) extracts obtained by UAE and M were more efficient in the majority of the bioactivity assays. This study represents an initial step toward the possible application of Paeonia root extracts in pharmacy, medicine, and food technologies.

Chemical composition and digestible and metabolizable energy contents in cold-pressed canola expellers fed to growing pigs.

Cold-pressed canola expellers (CPCE) are a byproduct of canola oil production obtained using the pressing method without thermal and chemical treatment. While CPCE is a valuable source of dietary energy and protein in swine nutrition, the discrepancy in processing conditions leads to variability in the nutritional quality of CPCE from different sources. This study aimed to determine the chemical composition, and digestible energy (DE) and metabolizable energy (ME) values of CPCE when fed to growing pigs. Samples of CPCE were collected from five processing facilities across Western Canada. The physical appearance of the CPCE samples hinted at a potential quality variation. Samples were subjected to a complete chemical characterization. Variations (P < 0.05) were observed in the chemical composition, with the exception of non-phytate phosphorus, xylose, mannose, and galactose. On a g/kg dry matter (DM) basis, CPCE samples ranged as follows: ether extract from 85 to 177; crude protein (CP) from 351 to 419; neutral detergent fiber 231 to 300; total dietary fiber from 326 to 373; glycoproteins from 30 to 76; non-starch polysaccharides from 188 to 204, non-phytate phosphorus from 5.5 to 6.4, and gross energy (GE) in kcal/kg 5,027 to 5,635. The total glucosinolates (GLS) ranged from 5.0 to 9.7 µmol/g DM. Thirty-six (36) growing barrows, with an average initial body weight of 19.2 ±â€…1.0 kg, were individually housed in metabolism crates and assigned to one of the six experimental diets in a completely randomized design, with six pigs per diet. The diets included a corn-soybean meal (SBM)-based basal diet (100%) and five (5) experimental diets in which 18% of the basal diet was substituted with CPCE from different producers. Pigs were fed the experimental diets for 10 d, with 5-d adaptation period, followed by a 5-d period for the total, but separate, collection of feces and urine. Significant differences (P < 0.05) among processing plants were observed in the DE and ME contents of CPCE, which averaged 3,531 and 3,172 kcal/kg DM, respectively. Differences (P < 0.05) were noted in the apparent total tract digestibility of GE, nitrogen (N), as well as in the retention of DM, GE, and N in CPCE samples. In conclusion, while the chemical composition and values of DE and ME in CPCE vary among processors, the byproduct obtained through cold pressing process can be a valuable source of energy and protein for pig nutrition.

Chemical Investigation and Antinociceptive Activity Evaluation of Marrubium Vulgare L. Aqueous Extract.

Marrubium vulgare L. (Lamiaceae) has a long history of use in traditional herbal medicine for the treatment of respiratory tract infections, inflammatory conditions, and pain. This study aimed to investigate the chemical composition, acute toxicity, and antinociceptive effects of the aqueous extract from M. vulgare leaves (AEMV). Antioxidant activity was evaluated using DPPH and reducing power assays. The chemical composition of AEMV was determined through LC-MS/MS, and the levels of total phenolics, flavonoids, and condensed tannins were quantified. Acute oral toxicity was assessed in male Swiss mice with a single oral dose of AEMV (1, 2, 5 g/kg). The analgesic impact was examined through writhing, hot plate, and formalin tests. Our findings not only confirmed the safety of the extract in animal models but also revealed significant antioxidant activity in AEMV. High-performance liquid chromatography (HPLC) analysis identified important bioactive compounds, with marrubiin being a major component. Furthermore, AEMV demonstrated robust antinociceptive properties in all conducted tests, highlighting its potential as a valuable natural source of bioactive compounds suitable for a wide range of therapeutic applications.

Evaluation of Sample Size Influence on Chemical Characterization and In Vitro Antioxidant Properties of Flours Obtained from Mushroom Stems Coproducts.

The mushroom industry generates large amounts of stem co-product. This is generated after mushroom harvest; stems are attached to the growth substratum, and their only use has traditionally been as compost. In this study, we investigated extensively for the first time this co-product and the influence of sample size (L->0.510 mm; LI-0.510-0.315 mm; SI-0.315-0.180 mm; S-<0.180 mm) on the characterization and antioxidant activity of flours obtained from stem co-products of Agaricus bisporus (ABSF) and Pleurotus ostreatus (POSF). ABSF was rich in protein (14 g/100 g), calcium (428.23-700.77 mg/100 g), and sorbitol (22.57-26.60 g/100 g), while POSF was rich in ß-glucans (36.62-40.34 g/100 g) and linoleic acid (20.57-39.86 g/100 g of lipid). Both species were flush in amino acids and had an umami flavour. ABSF showed more elevated values for emulsifying activity than POSF. The S sizes were highlighted for their yield, hydration properties, and oil holding capacity. Furthermore, ABSF-S exhibited heightened antioxidant capacity in vitro, in consonance with the total phenolic compounds observed (0.91 mg/g). However, the antioxidant assays in POSF presented a positive correlation with ß-glucan content. Our study suggests that these co-products could have several food-related applications, such as potential for use as an emulsifier, sweetener, or fortifier in the development of functional food, owing to their rich concentrations of fibre, protein, sorbitol, and ß-glucans. Nevertheless, it is necessary to understand the interactions of the flours with the potential food matrix prior to proceeding further with food-related applications.

Taring the scales: Weight-of-evidence framework for biocompatibility evaluations.

ISO 10993-1:2018 describes evaluating the biocompatibility profile of a medical device from a risk-based approach. This standard details the battery of information that should be considered within the assessment of a device, including raw material composition data, manufacturing processes, and endpoint testing. The ISO 10993/18562 series requires worst-case assumptions and exposure scenarios to be used in the evaluation, which may result in an over-estimation of patient safety risk. Currently, biocompatibility assessments evaluate each data set independently, and the consequence of this individualized assessment of exaggerated inputs is potential false alarms regarding patient safety. To evaluate these safety concerns, the ISO standards indicate that professional judgement should be used to estimate patient risk but does not provide guidance on incorporating a holistic review of the data into the risk assessment. Recalibrating these worst-case data to evaluate them in a weight-of-evidence (WoE) approach may provide a more realistic data set to determine actual patient risk. This proposed WoE framework combines understanding data applicability with a method for gauging the strength of data that can provide additional support for the final safety conclusion. Using a WoE framework will allow risk assessors to contextualize the data and utilize it to comprehensively estimate patient safety.

Algae removal and algal organic matter chemistry modulated by KMnO4-PAC in simulated karst water.

In this study, we examined the modulation of algae removal and algal organic matter (AOM) chemistry by potassium permanganate and poly-aluminum chloride (KMnO4-PAC) in simulated karst water. Specifically, we verified the compositional changes of AOM sourcing from Chlorella sp. and Pseudanabaena sp. in response to the presence of divalent ions (Ca2+ and Mg2+). Aromatic protein and soluble microbial products were identified as the primary AOM components. Divalent ions accelerated dissolved organic carbon (DOC) and UV254 removal, particularly with Pseudanabaena sp. greater than Chlorella sp. (P < 0.05). Surface morphology analysis manifested that the removal of filamentous Pseudanabaena sp. was more feasible in comparison to globular Chlorella sp.. Our results highlight the significance of divalent ions in governing chemical behaviors and subsequent removal of both algae and AOM. This study upscales the understanding of the interactions among divalent ions, algae and AOM during preoxidation and coagulation process in algae-laden karst water.