Declining US dental amalgam restorations in US Food and Drug Administration-identified populations: 2017-2023.

BACKGROUND: In light of the Minamata Convention on Mercury and efforts to phase down dental amalgam use, tracking dental amalgam proportions across US Food and Drug Administration (FDA)-identified at-risk populations is of interest to optimize material selection aligned with patient needs. METHODS: A retrospective observational study of Epic's Cosmos electronic health records data set was conducted to calculate the rates of dental amalgam restorations from 2017 through 2023 and stratified using the social vulnerability index (quartile 4 indicates the highest social vulnerability and quartile 1 indicates the lowest) and payer type (Medicare, Medicaid, self-pay, miscellaneous or other). The authors included the following FDA-identified at-risk populations: pregnant people, children younger than 6 years, people with preexisting neurologic conditions, and people with impaired kidney function (n = 1,897,976). RESULTS: The overall rate of dental amalgam restoration placements in the general population declined from 21.8% in 2017 to 4.1% in 2023. Dental amalgam restoration trends, according to social vulnerability index quartile and payer type, decreased consistently across all 4 evaluated populations. Of all the social vulnerability index quartiles, quartile 4, representing the most socially vulnerable group, had the smallest decrease in dental amalgam placement rates among the FDA-identified populations examined. CONCLUSIONS: The study results showed a decreasing trend in dental amalgam restorations from 2017 through 2023 among FDA-identified populations, consistent with the Minamata Convention on Mercury directive for a phasedown in dental amalgam use. Notwithstanding improvements, lingering disparities persist among the most vulnerable population. PRACTICAL IMPLICATIONS: Even within the groups identified as most vulnerable to harm, more targeted interventions and strategies are required to improve treatment among the most socially vulnerable.

Designing and additive manufacturing of biomimetic interpenetrating phase zirconia-resin composite dental restorations with TPMS structure.

Zirconia and resin are the most commonly utilized materials in dental restorations. However, zirconia presents significant wear on opposing teeth, whereas resin materials have low wear resistance and mechanical performances. A zirconia-resin interpenetrating phase composite (IPC) dental restoration was designed and fabricated using 3D printing and vacuum infiltration processes, incorporating zirconia scaffolds with triply periodic minimal surfaces (TPMS) structures. The mechanical and tribological performances of the IPCs were investigated through compressive and tribological experiments and finite element analysis, elucidating the influence of zirconia volumetric fraction. Results showed that IPCs exhibit excellent mechanical and tribological compatibilities, which can reduce the damage and wear of the antagonistic teeth. This designing and manufacturing strategy enables the IPC restorations with promising applications in dentistry.

Alkasite restorative material for endodontically treated teeth: a randomized controlled pilot study.

Objectives: This study aimed to evaluate the clinical performance of an alkasite restorative material in molars that had undergone root canal treatment. Materials and Methods: The research was registered in Brazilian Registry of Clinical Trials. The randomized clinical trial involved 33 patients, each with at least 1 mandibular molar requiring restoration after receiving endodontic treatment. Patients were randomly assigned to receive either bulk-fill resin composite (Tetric N Ceram Bulk Fill, Ivoclar Vivadent) or the alkasite restorative material (Cention N, Ivoclar Vivadent). Upon completion of the restorations, 3 calibrated professionals utilized the United States Public Health Service criteria to assess various factors, including retention, secondary caries, marginal adaptation, restoration color, marginal pigmentation, and anatomical form. Evaluations were conducted at intervals of 7 days, 6 months, and 17 months. Additionally, the assessment encompassed the presence of radiolucent lines adjacent to the restoration, material deficiencies or excess, contact points, and caries recurrence. The data underwent analysis using the Friedman and Mann-Whitney tests (α = 0.05). Results: After 17 months, the results revealed that the alkasite restorative material exhibited greater wear of anatomical shape compared to the bulk-fill resin composite (p = 0.0189). Furthermore, the alkasite restorative material significantly differed from the natural tooth color in most cases (p = 0.0000). However, no other criteria displayed significant differences between the materials or over time (p > 0.05). Conclusions: The alkasite restorative material (Cention N) emerges as a viable option for restoring endodontically treated teeth, displaying clinically acceptable alterations after a 17-month evaluation period. Trial Registration: Brazilian Registry of Clinical Trials (ReBEC) Identifier: RBR-97kx5jv.

Clinical behavior and survival of endodontically treated teeth with or without post placement: a systematic review and meta-analysis.

PURPOSE: Non-vital teeth usually exhibit substantial loss of coronal and radicular tooth structure, and use of posts after root canal treatment is controversial. This review examined whether placement of posts influences clinical behavior and survival probability of endodontically treated teeth (ETT). METHODS: An electronic search, without time restrictions, for publications written in English was undertaken in PubMed, Scopus, and Web of Science. Terms related to four main components (endodontically treated teeth, fixed prosthesis, post restoration, and survival rate) were used for the database search strategies. RESULTS: 57 studies met the inclusion criteria and were included in the qualitative analysis. Of the publications chosen for qualitative analysis, 17 clinical studies (11 prospective and 6 retrospective studies) were found to be suitable for quantitative analysis. These studies included 7,278 patients (7,330 ETT), with a mean age ± standard deviation (SD) of 45.46 ± 12.1 years. There was a statistically significant difference in survival rate between ETT with or without posts (P < 0.001). CONCLUSION: As compared with teeth with no posts, post placement on ETT may improve clinical performance and survival probability of endodontically treated teeth.

Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Influence of viscosity and fiber reinforcement of resin composite on fracture strength and failure mode of restored molars.

OBJECTIVE: To evaluate the fracture behavior of human molars with extensive MOD restorations using short-fiber-reinforced resin composite of varying viscosities. MATERIALS AND METHODS: Human molars were randomly divided into seven groups (n = 12): intact teeth (control); restoration using conventional high-viscosity resin composite without (Filtek Z350XT, 3M) or with fibers (everX Posterior, GC); conventional low-viscosity resin composite without (Filtek Supreme Flowable, 3M) or with fibers (everX Flow Dentin Shade, GC); bulk-fill low-viscosity resin composite (Filtek Bulk Fill Flow, 3M) or with fibers (everX Flow Bulk Shade, GC). Restorations were performed on extensive MOD preparations, following the manufacturers' recommendations for each material. Specimens underwent fracture strength testing (N) and fracture pattern (%) categorized as repairable, possibly repairable, or non-repairable. Results were analyzed using a generalized linear model (N) and Fisher's exact test (%), with α = 0.05. RESULTS: Restorations performed with high-viscosity materials showed fracture strength values similar to the control and higher than those of restorations using low-viscosity resin composites (p < 0.0001), except for the bulk-fill low-viscosity resin composite with fibers (p > 0.05). Teeth restored using low-viscosity resin composite with fibers showed a higher % of repairable and possibly repairable fractures than the control (p = 0.0091). CONCLUSIONS: The viscosity of materials mediated the fracture strength, with restorations using high-viscosity resin composites promoting values similar to the intact tooth; however, the presence of fibers influenced the fracture pattern. CLINICAL SIGNIFICANCE: Teeth with MOD cavities restored with high-viscosity resin composites showed similar fracture strength to intact teeth. Fiber-reinforced low-viscosity resin composite for the base of restoration resulted in a more repairable/possibly repairable fracture pattern.

Spot-etch technique and other adhesive strategies for provisional veneers.

AIM: The objective of the present study was to evaluate the influence of different adhesive strategies regarding shear bond strength (SBS) of provisional resin--based materials bonded to the enamel surface as well as on the enamel surface roughness. MATERIALS AND METHODS: Bovine incisors were randomly divided into six groups (n = 10) according to the adhesive strategy used: BRControl (bis-acrylic resin); Spot-etch+BR (spot-etch + bis-acrylic resin); Spot--etchSB2+BR (spot-etch + adhesive + bis-acrylic resin); Spot-etchZ350Flow+BR (spot-etch + flowable composite resin + bis-acrylic resin); SBU+BR (universal adhesive + bis-acrylic resin); Spot-etchSBMP+Z350 (spot-etch + adhesive + composite resin). The enamel surface roughness was determined by a surface profil-ometer. An SBS test was performed in a universal testing machine, and failure modes were classified under magnification. The SBS data were analyzed by one-way analysis of variance (ANOVA). A paired t test was used for enamel surface roughness intragroup comparisons, and the Friedman one-way repeated meas-ures analysis of variance by ranks was used for differences in enamel surface roughness between groups, with the Tukey post hoc test (a = 0.05). RESULTS: BRControl had the lowest SBS values (MPa), with a significant difference (P ≤ 0.001) from the other groups. Spot-etch+BR had the highest SBS values but with no significant differences from the other groups in which the spot-etch technique was also used. Adhesive failure mode was predominant for all groups. BRControl had the lowest surface roughness difference, significantly different (P = 0.001) from all the other groups. CONCLUSIONS: Spot-etch and other adhesive strategies could be applied to increase the SBS values of provisional restorations to enamel compared with no surface pretreatment. However, the adhesive strategy may change the enamel surface roughness, revealing the importance of cleaning the tooth surface.

Exceptional bone remodeling over composite restoration in the management of external root resorption: A case report.

A 65-year-old Caucasian male was referred to an endodontic specialist practice in a private clinic in December 2019 for the management of an asymptomatic, radiolucent lesion located at the cervical level of the distal root of his right lower first molar, noticed during a routine periapical radiograph. After an accurate evaluation with cone-beam computed tomography (CBCT), the subgingival lesion was diagnosed as a supracrestal external cervical resorption (ECR), with a circumferential spread ⩽90°, confined to dentine without pulp involvement. The lesion was treated with the following sequence: (1) a full flap accessed the ECR, (2) the granulomatous tissue was removed from the root area, (3) the cavity was refreshed and filled with a well-refined and polished resin composite, (4) the flap was sutured at the cemento-enamel junction. A mandibular CBCT scan was performed before treatment, right after treatment, and 3 years postoperatively. Compared to the 3-year posttreatment CBCT scan, the immediate posttreatment one, revealed the absence of bone loss and an unexpected coronal bone remodeling with new bone formation over the treated lesion.

Determining the Failure Rate of Direct Restorations-Chart Review versus Electronic Health Record Reports.

Amalgam and composite restorations are used to treat minor dental issues. University of Michigan, School of Dentistry Electronic Health Record (EHR) reports show a 2.31% failure rate for amalgam and 1.14% for composite. Our study aims to determine the true failure rates through manual EHR chart reviews. Patient data from the University of Michigan School of Dentistry were utilized-216 amalgam restorations from 2020 to 2022 and 350 composite restorations in 2021 were searched. We defined failure and retreatment as replacing a restoration with the same material and failure and alternate treatment as replacing restoration with an alternative treatment within one year. The failure rate refers to a combination of replacement with the same and alternative treatment material within one year. For Amalgam: 1.85% failed and were retreated; 7.87% failed and were received an alternate treatment. Composite: 9.71% failed and retreated; 2.86% failed and received alternate treatment. In total anterior composite: 10.5% retreated, 2.6% failed; posterior composite: 9.1% retreated, 3.0% failed. Our study revealed higher restoration failure rates than the reports extracted in the EHR. This highlights the need to foster a culture of precise documentation to align EHR reports with hand-search findings.

Color Stability of Single-Shade Resin Composites in Direct Restorations: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Schizodontic Molarization of Mandibular Premolars: A Case Report of Gemination.

Background: Tooth gemination is a single enlarged or joined tooth with a normal tooth count when the anomalous tooth is counted as one. Mandibular second premolars show an elevated variability of crown morphology. Only nine cases of isolated second premolar macrodontia have been reported in the literature. Case Description: This case report presents the clinical and radiographic findings and conservative treatment of an atypical and rare case of localized bilateral molarization of mandibular second premolars. Conclusion: Dental professionals should acquire deeper knowledge about anomalies and plan treatment carefully to avoid unexpected complications during dental procedures caused by morphological ignorance.

Clinical Difficulties Related to Direct Composite Restorations: A Multinational Survey.

AIMS: Composite materials are widely used in dentistry for direct tooth restorations. However, they are highly sensitive to the working technique employed during the restorative procedure. Even minor procedural errors can have a significant impact on the quality including the longevity of the restoration. Hence the aim of this study was to determine the material preferences and analyse the clinical problems associated with direct composite restorations in a cohort of dentists. METHODS: A 20-item online questionnaire was created in English and administered 1830 general dentists and specialists in 13 countries. The first section of the questionnaire included four questions to elicit demographic data, and the second section comprised 16 questions focused on material preferences for conservative restorations, durability of composite restorations, and the most challenging stages the dentists faced during the composite restorative procedures. RESULTS: Respondents decided most often to use composite materials for the tooth restorations (OR 997.4, 95% CI 233.8-4254.8, P value <.001). Most respondents indicated that the durability of composite restorations was approximately 7 to 10 years (41.5%). Among the factors affecting durability, maintenance of a dry cavity was the most often reported reason (47.1%) and the foremost challenge faced by dentists (61.0%) during the composite restorative procedures. CONCLUSIONS: Our study confirmed that resin-based composites are the most popular material for direct restoration in many countries. Although working with this material is difficult and involves multiple steps, maintaining a dry cavity during bonding, and material application may affect the therapeutic success and durability of these restorations. Clinicians need to be attentive to this issue and be prepared to adapt their decision-making and consider opting for alternative restorative materials, if appropriate.

Esthetically driven immediate provisionalization in the anterior zone: 5-year results from a prospective study evaluating 3.0-mm-diameter tapered implants.

OBJECTIVES: Evaluate the 5-year safety and efficacy of a narrow-diameter (3.0 mm) implant that was immediately provisionalized with a single crown in the maxillary lateral incisor or mandibular central or lateral incisor area. MATERIALS AND METHODS: An open, prospective, single-cohort, multicenter study was conducted, in which narrow-diameter implants were placed in fresh, healed extraction, or congenitally missing sites. All patients were required to meet strict criteria for immediate loading. The primary endpoints were marginal bone levels (MBL) and MBL changes (MBLC) from implant placement to 5-year follow-up. Secondary endpoints included cumulative 5-year survival and success rates, soft tissue health, and esthetic parameters. RESULTS: A total of 91 implants were placed in 77 patients. The mean MBL remained stable from the 1-year (- 0.79 ± 0.73 mm, n = 75) to 5-year (- 0.74 ± 0.87 mm, n = 65) follow-up. A marginal bone gain of 0.11 ± 0.83 mm was observed from the 1-year to 5-year follow-up. The cumulative 5-year survival rate was 96.5%, and the cumulative 5-year success rate was 93%. The clinical parameters, including the modified plaque index, modified sulcus bleeding index, Jemt's papilla index, and pink esthetic score improved throughout the 5-year study. CONCLUSIONS: The study demonstrated that narrow-diameter implants represent a safe and predictable treatment option for subjects suitable for immediate loading and with limited bone volume or limited inter-dental space. CLINICAL RELEVANCE: Narrow-diameter implants with immediate provisionalization can be considered for use to restore missing or damaged teeth with predictable functional and esthetic outcomes. This trial was registered with ClinicalTrials.gov (NCT02184845).

Mechanical properties, cytotoxicity, and protein adsorption of three-dimensionally printable hybrid resin containing zwitterionic polymer and silicate-based composites for dental restorations.

OBJECTIVE: To evaluate the mechanical and biological properties of three-dimensionally (3D) printable resins filled with 2-methacryloyloxyethyl phosphorylcholine (MPC) and silicate-based composites and compare with those of a commercially available 3D-printable resin for definitive restorations. METHODS: A group of 3D-printable hybrid resins (HRs) filled with 6 wt% MPC and three different compositions of silicate-based composites (barium silicate to zirconium silicate ratios: 1.50:1 for HR1, 0.67:1 for HR2, and 0.25:1 for HR3) were prepared. The HR groups were compared with the commercially available unfilled 3D-printable resin (CR) marketed for definitive restorations in terms of flexural strength and modulus, fracture toughness, surface roughness, Vickers hardness, light transmittance (all, n = 15), cytotoxicity, and protein adsorption (both, n = 3). All data were analyzed by using non-parametric Kruskal-Wallis and Dunn's tests (α=0.05). RESULTS: The HR groups had significantly higher flexural strength, modulus, fracture toughness, and hardness values than the CR (P < 0.001). HR3 had the highest surface roughness and light transmittance among the groups (P ≤ 0.006). None of tested resins showed cytotoxicity. Both HR2 and HR3 showed significantly lower protein adsorption than the CR, with a difference of approximately 60% (P ≤ 0.026). CONCLUSION: Both HR2 and HR3 exhibited superior mechanical properties (flexural strength, flexural modulus, fracture toughness, and Vickers hardness), light transmittance, and protein-repellent activity than the CR, with no impact on cytotoxicity. CLINICAL SIGNIFICANCE: The MPC/silicate-based composite-filled resins may be a suitable alternative for definitive restorations, given their higher mechanical properties and promising biological properties to prevent microbial adhesion and subsequent biofilm formation, as well as their non-cytotoxic properties.

Applications of artificial intelligence in restorative dentistry: a scoping review.

OBJECTIVE: Artificial intelligence (AI) applications in restorative dentistry have remarkably increased in the past 5 years. This review outlines the applications, promises, and limitations of AI in the most performed procedures in restorative dentistry. METHOD AND MATERIALS: An electronic search was performed in four databases: MEDLINE/PubMed, Embase, Web of Science, and Scopus. The search included articles published in English language without date restriction. Two independent reviewers assessed the eligibility of the studies and performed data extraction. Any discrepancy was resolved by the consensus of a third reviewer. RESULTS: A total of 33 studies were included in this review. For AI applications in restorative dentistry, the included studies were classified into three main groups: (1) diagnosis, detection, and prediction of the disease, (2) detection and prediction of the longevity of dental restorations, and (3) teeth detection and treatments. For each study, the AI model, type of dataset, sample size, and main results (accuracy, precision, sensitivity, and specificity) were reported. CONCLUSIONS: AI systems are promising as advantageous aids for diagnosis, prediction, and treatment in dentistry, with a high degree of accuracy. Despite the AI promises, several limitations are still unresolved and must be addressed to bridge the gap between technology and clinical applications.

Effect of different design and surface treatment on the load-to-failure of ceramic repaired with composite.

Glass ceramics are widely used to manufacture esthetic veneers, inlays, onlays, and crowns. Although the clinical survival rates ofglass-ceramic restorations arefavorable,fractures or chips are common. Certain cases can be repaired with direct composite. AIM: The aim of this study was to investigate the interaction effect of different designs and surface treatments on the load-to-failure of lithium disilicate glass-ceramic repaired with nanofilled composite. MATERIALS AND METHOD: Lithium-disilicate glass-ceramic slabs (IPS e.max Press, Ivoclar Vivadent) with three different designs of the top surface (flat, single plateau, or doubleplateau) (n=U) received 'no treatment', '5% HF etching', or "AI2O3 sandblasting". HF-etched and sandblasted slabs also received silane and universal one-step adhesive application. All slabs were incrementally repaired with nanofilled composite (Filtek Z350, 3M ESPE) up to6 mm above the highest ceramic top plateau. Specimens were stored in artificial saliva at 37 °C for 21 days and then subjected to 1,000 thermocycles between 5 and 55 °C. The interface composite-ceramic of each specimen was tensile tested until failure in a universal testing machine and the mode of failure was determined under a stereomicroscope. The ceramic surface morphology of one representative tested specimen from each subgroup (design/surface treatment) was observed through scanning electron microscopy (SEM). RESULTS: Regardless of ceramic design, the absence of surface treatment resulted in significantly lower load-to-failure values. No significant differences in load-to-failure values were observed between HF-etched and sandblasted specimens for the flat design; however, HF etching resulted in significantly higher load-to-failure values than sandblasting for both single plateau and double plateau designs. The majority (60%) of HF-etched specimens with single plateau or double plateau presented mixed failures. SEM photomicrographs showed that HF-etched specimens had smoother surfaces than sandblasted specimens. CONCLUSION: The surface treatment of a defective lithium disilicate glass-ceramic restoration has more influence than its macroscopic design on the retention of the composite repair. HF etching seems to provide higher bond strength to the composite repair.

Embora fraturas e lascamento de restauragoes vitrocerámicas sejam comuns, alguns casos podem ser reparados com compósito direto. OBJETIVO: investigar o efeito da interagao de diferentes formas e tratamentos de superficie na carga de ruptura de uma vitrocerámica reforgada com dissilicato de litio reparada com compósito nanoparticulado. MATERIAIS E MÉTODOS: A superficie superior de espécimes de vitroceramica (IPS e.max Press, Ivoclar Vivadent) foi preparada com tres formas (plana, plato único, ou duplo) e recebeu (n=11): 'nenhum tratamento', 'condicionamento com ácido hidrofluoridrico 5%', ou 'jateamento com AfOf. Ambos espécimes condicionados e jateados receberam silano e adesivo universal. Todos os espécimes foram reparados incrementalmente com compósito (Filtek Z350, 3M ESPE) até6 mm acima do plato cerámico mais alto, armazenados em saliva artificial á 37 °C por 21 dias, e submetidos á 1.000 termociclos (5 e 55 °C). A interface compósito-cerámica de cada amostra foi testada á tragao até sua falha em máquina universal e o modo de falha foi determinado com estereomicroscópio. A morfologia da superficie de uma amostra representativa de forma/tratamento de superficie foi observada através de microscopia eletronica de varredura (MEV). RESULTADOS: Independentemente da forma ceramica, a ausencia de tratamento superficial resultou em valores de carga de ruptura significativamente menores. Nao foi observada differenga significativa entre os espécimes planos condicionados ou jateados; no entanto, o condicionamento resultou em valores significativamente maiores que o jateamento para espécimes com plato único e duplo. A maioria (60%) dos espécimes condicionados e com plato único ou duplo apresentou falhas mistas. Imagens SEM demonstraram rugosidade superficial mais regular dos espécimes condicionados que os jateados. CONCLUSÕES: O tratamento superficial de uma restauragao defeituosa de vitrocerámica reforgada por dissilicato de litio tem maior influencia na retengao do reparo de compósito do que sua forma macroscópica; ainda, o condicionamento com ácido hidrofluoridrico parece proporcionar maior resistencia de uniao ao reparo com compósito.

Bond strength and marginal adaptation of resin composites and correlations with clinical results.

OBJECTIVES: Due to innumerable confounding factors and a high number of types and brands of dental restorative materials, the clinical performance of restorative materials are sought predicted by various in vitro tests. However, only few such tests have been found to correlate well with clinical findings. Thus, the present study determined the in vitro dentin bond strength and marginal adaptation of Class II restorations and correlated the results to their clinical outcomes. METHODS: Dentin bond strength (µTBS and µSBS) and marginal gap formation of Class II restorations (replica technique and SEM) were measured after 24 h and 6 m water storage using eight combinations of adhesive and resin composite. Clinical outcomes (mean survival time, Hazard Ratio, annual failure rate; n = 10.695) were gained from a data set of a retrospective multicenter study of direct restorations. RESULTS: Significant differences were found for dentin bond strength and marginal gap formation between the restorative material groups, and negative effects of long-term storage were observed. µTBS correlated significantly with certain clinical outcomes of Class I restorations, while µSBS correlated with certain clinical outcomes of Class II, III, IV and V restorations. Marginal gap formation in enamel and number of paramarginal fractures correlated with certain clinical outcomes of Class II restorations. SIGNIFICANCE: Using the same restorative materials in vitro as in vivo, gave significant, but weak correlations between in vitro bond strength or marginal adaptation and clinical outcomes, lending support to the use of in vitro tests in early stages of material selection.

Adding mechanobiological cell features to finite element analysis of an immediately loaded dental implant.

Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies have tried to simulate the biological characteristics of the healing process of loaded implants. This study used the rule of mixtures to simulate the biological healing process of immediate implants in an alveolus socket and bone-implant junction interface through FEA. Three-dimensional geometric models of the structures were obtained, and material properties were derived from the literature. The rule of mixtures was used to simulate the healing periods-immediate and early loading, in which the concentration of each cell type, based on in vivo studies, influenced the final elastic moduli. A 100 N occlusal load was simulated in axial and oblique directions. The models were evaluated for maximum and minimum principal strains, and the bone overload was assessed through Frost's mechanostat. There was a higher strain concentration in the healing regions and cortical bone tissue near the cervical portion. The bone overload was higher in the immediate load condition. The method used in this study may help to simulate the biological healing process and could be useful to relate FEA results to clinical practice.

Effect of preparation design and endodontic access on fracture resistance of zirconia overlays in mandibular molars: An in vitro study.

PURPOSE: To evaluate the fracture resistance of zirconia overlays, considering various preparation designs and the presence of endodontic access. MATERIALS AND METHODS: Ninety translucent zirconia (5Y-PSZ) overlay restorations were divided into six groups (n = 15/group) based on different preparation designs, with and without endodontic access: chamfer margin 4 mm above the gingival level without (group 1) and with endodontic access (group 2); margin 2 mm above the gingival level without (group 3) and with endodontic access (group 4); overlay with no chamfer margin without (group 5) and with endodontic access (group 6). Restorations were bonded to mandibular first molar resin dies, and the groups with endodontic access were sealed with flowable resin composite. All restorations underwent 100,000 cycles of thermal cycling between 5°C and 55°C, followed by loading until fracture. Maximum load and fracture resistance were recorded. ANOVA with Tukey post-hoc tests were used for statistical comparison (α < 0.05). RESULTS: Fracture resistance significantly varied among overlay designs with and without endodontic access (p < 0.001), except for the no-margin overlays (groups 5 and 6). Overlays with a 2 mm margin above the gingival margin with endodontic access (group 4) exhibited significantly higher fracture resistance compared to both the 4-mm supragingival (group 2) and no-margin (group 6) designs, even when compared to their respective intact groups (groups 1 and 5). There were no significant differences between the no-margin and 4-mm supragingival overlays. CONCLUSION: The more extensive zirconia overlay for mandibular molars is the first choice since the 2 mm margin above the gingival level design withstood considerable loads even after undergoing endodontic access. A no-margin overlay is preferred over the 4-mm supragingival design as it preserves more tooth structure and there was no outcome difference, irrespective of endodontic access. Caution is warranted in interpreting these findings due to the in vitro nature of the study.

Influence of size-anatomy of the maxillary central incisor on the biomechanical performance of post-and-core restoration with different ferrule heights.

PURPOSE: The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS: Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS: Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION: Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.