Charged functional groups modified porous spherical hollow carbon material as CDI electrode for salty water desalination.

As a new electrochemical technology, capacitive deionization (CDI) has been increasingly applied in environmental water treatment and seawater desalination. In this study, functional groups modified porous hollow carbon (HC) were synthesized as CDI electrode material for removing Na+ and Cl- in salty water. Results showed that the average diameter of HC was approximately 180 nm, and the infrared spectrum showed that its surface was successfully modified with sulfonic and amino groups, respectively. The sulfonic acid functionalized HC (HC-S) showed better electrochemical and desalting performance than the amino-functionalized HC (HCN), with a maximum Faradic capacity of 287.4 F/g and an adsorptive capacity of 112.97 mg/g for NaCl. Additionally, 92.63% capacity retention after 100 adsorption/desorption cycles demonstrates the excellent stability of HC-S. The main findings prove that HC-S is viable as an electrode material for desalination by high-performance CDI applications.

Scalable Graphene Oxide Hollow Fiber Membranes for Dye Desalination Enabled by Multi-Purpose Polyamine Functionalization.

2D nanosheets such as graphene oxide (GO) can be stacked to construct membranes with fine-tuned nanochannels to achieve molecular sieving ability. These membranes are often thin to achieve high water permeance, but their fabrication with consistent nanostructures on a large scale presents an enormous challenge. Herein, GO-based hollow fiber membranes (HFMs) are developed for dye desalination by synergistically combining chemical etching to form in-plane nanopores (10-30 nm) to increase water permeance and polyamine functionalization to improve underwater stability and enable facile large-scale production using existing membrane manufacturing processes. HFM modules with areas of 88 cm2 and GO layer thicknesses of ≈500 nm are fabricated, and they exhibited a stable dye water permeance of 75 L m-2 h-1 bar-1, rejection of >99.5% for Direct red and Congo red, and Na2SO4/dye separation factor of 300-500, superior to state-of-the-art commercial membranes. The versatility of this approach is also demonstrated using different short polyamines and porous substrates. This study reveals a scalable way of designing 2D materials into high-performance robust membranes for practical applications.

Assessment of brine discharges dispersion for sustainable management of SWRO plants on the South American Pacific coast.

Seawater desalination is one of the most feasible technologies for producing fresh water to address the water scarcity scenario worldwide. However, environmental concerns about the potential impact of brine discharge on marine ecosystems hinder or delay the development of desalination projects. In addition, scientific knowledge is lacking about the impact of brine discharges on the South America Pacific coast where desalination, is being developed. This paper presents the first monitoring results of brine discharge influence areas from seawater reverse osmosis desalination plants (SWRO) on the South America Pacific coast, using Chile as case study. Our results indicate that the combination of favorable oceanographic conditions and diffusers, results in the rapid dilution of brine discharge on coastal ecosystems; showing a faster dilution than other SWRO plants in other regions, such as Mediterranean or Arabian Gulf, with similar production characteristics. Also, the increase in salinity over the natural salinity in the brine-discharge-affected area was <5 % in a radius of <100 m from the discharge points. Further, according to the published literature and on our monitoring results, we propose a number of considerations (environmental regulation, best scientifically tested measures, environmental requirements) to achieve a long-term sustainable desalination operation.

Minimizing energy footprint of seawater desalination system via wind power generation in coastal areas.

Wind power has become an essential direction for transforming energy structures in energy-intensive seawater desalination under the dual goals of carbon peaking and carbon neutrality. In this study, the energy footprint of the case project is analyzed by combining the hybrid life cycle analysis and environmentally extended input-output modeling, which is compared with the traditional thermal desalination processes from the whole life cycle perspective. The analysis revealed that the total energy consumption of the seawater desalination driven by wind power generation can be reduced by 79.77% compared with the traditional thermal drive mode under the same water production scale. Although the energy consumption in the construction phase accounts for 24.97% of the total, the energy consumption per unit of water production can be reduced by about 80% after adopting wind power technologies. The payback period is 7.2 years, that is, the energy consumption can be balanced after around 7 years during the operation phase. The results showed that the wind-driven seawater desalination system can significantly decrease the energy consumption of the project, which attempts to provide implications for the upgrading of energy-intensive seawater desalination in coastal areas towards low-carbon transition.

MOF-303 with Lowered Water Evaporation Enthalpy for Solar Steam Generation.

Hydrophilic metal-organic frameworks (MOFs) are promising for solar steam generation from waste or seawater. In this study, we propose a MOF-based Janus membrane for efficient solar steam generation. We selected MOF-303 for its hydrophilic properties and 1D channels with 6.5 Å cavity diameter, making it an excellent water-absorbing layer. Characterization via Raman spectroscopy and differential scanning calorimetry indicates that the nanoconfinement within MOF-303 can reduce the water evaporation enthalpy, thereby boosting water production efficiency. When deposited on various substrates, MOF-303 aimed to optimize solar steam generation. We enhanced the membrane performance by incorporating carbon black (CB), polydopamine (PDA), and perfluoro-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT-F), materials known for their solar-to-thermal energy conversion capabilities. PEDOT-F, in particular, also served as a hydrophobic layer, preventing salt recrystallization during seawater operation. Under one sun irradiation, the water evaporation flux for deionized water increased from 0.31 to 0.79 kg h-1 m-2 using a porous hydrophilic poly(vinylidene difluoride) substrate and further to 2.36 kg h-1 m-2 with the optimized MOF-303-CB/PDA-PEDOT-F membrane, achieving an energy conversion efficiency of 97%. Additionally, the desalination capability of the MOF-303 membrane effectively reduced metal ion concentrations (Na+, K+, Mg2+, and Ca2+) to meet the WHO drinking water standards. These findings demonstrate the significant potential of the MOF-303-based Janus membrane for practical applications in solar steam generation and desalination, combining high water evaporation rates with excellent energy conversion efficiency.

A novel approach to integrate CCHP systems with desalination for sustainable energy and water solutions in educational buildings.

This study presents a novel approach to integrating combined cooling, heating, and power (CCHP) systems with water desalination for enhanced energy and water management in educational buildings. Two distinct layouts for CCHP and desalination systems are introduced: one prioritizing efficient power generation to meet electricity demands while providing waste heat for desalination, and the other focusing on balancing cooling and heating loads alongside water desalination. Both layouts are tailored to meet the building's energy and water demands while considering operational efficiency. Optimization of these layouts against traditional systems using the bat search algorithm emphasizes economic viability and the gas engine's operational flexibility, which are crucial for partial load operation. In addition, an environmental assessment compares the proposed CCHP-desalination systems with conventional setups, assessing CO2 emission reductions and overall sustainability. The evaluation encompasses key environmental metrics, such as resource consumption and the integration of renewable energy sources. Results highlight significant CO2 emission reductions across various gas engine capacities, with notable enhancements in economic and environmental performance achieved by selecting a 3,250 kW gas engine within the CCHP-desalination system. This choice not only maximizes the annual profit but also reduces CO2 emissions by 57% compared to conventional systems, underscoring the system's sustainability benefits.

Nanocellulose-Based Materials for Water Pollutant Removal: A Review.

Cellulose in the nano regime, defined as nanocellulose, has been intensively used for water treatment. Nanocellulose can be produced in various forms, including colloidal, water redispersible powders, films, membranes, papers, hydrogels/aerogels, and three-dimensional (3D) objects. They were reported for the removal of water contaminants, e.g., heavy metals, dyes, drugs, pesticides, pharmaceuticals, microbial cells, and other pollutants from water systems. This review summarized the recent technologies for water treatment using nanocellulose-based materials. A scientometric analysis of the topic was also included. Cellulose-based materials enable the removal of water contaminants, and salts offer advanced technologies for water desalination. They are widely used as substrates, adsorbents, and catalysts. They were applied for pollutant removal via several methods such as adsorption, filtration, disinfection, coagulation/flocculation, chemical precipitation, sedimentation, filtration (e.g., ultrafiltration (UF), nanofiltration (NF)), electrofiltration (electrodialysis), ion-exchange, chelation, catalysis, and photocatalysis. Processing cellulose into commercial products enables the wide use of nanocellulose-based materials as adsorbents and catalysts.

Photo-Fenton-Active MIL-88A/CNT-Based PVA Hydrogel for Solar-Driven Water Evaporation and Simultaneous Volatile Organic Compound Removal.

Solar-driven interfacial water evaporation (SIWE) has emerged as a promising avenue for cost-effective freshwater production from seawater or wastewater. However, the simultaneous evaporation of volatile organic compounds (VOCs) presents a limitation for the widespread implementation of this technique. Thus, developing dual-functional evaporators capable of both desalining seawater and degrading VOCs is challenging. Herein, we fabricated an iron-based metal-organic framework MIL-88A/carbon nanotubes (CNTs) poly(vinyl alcohol) hydrogel (MCH) evaporator via the conventional freezing method for solar-driven seawater desalination and simultaneous photo-Fenton VOC degradation. Because of the superior photothermal conversion capability of CNTs, reduced thermal conductivity and water evaporation enthalpy within the hydrogel, and the photo-Fenton activity of rod-shaped MIL-88A, the MCH evaporator exhibits a higher evaporation rate of 2.26 kg m-2 h-1 under 1 sun illumination with simultaneous VOC degradation. The higher hydrophilicity and vertical channels in the MCH evaporator enable its self-salt cleaning ability, facilitating consistent seawater desalination, even in high salt concentrations up to 10 wt %. The synergistic effects of localized heating from CNTs and hydrogen peroxide activation through reactive sites of MIL-88A allow the MCH evaporator to degrade more than 93% of the added phenol during evaporation. This work presents a sustainable and efficient approach for solar-driven seawater desalination, offering simultaneous VOC degradation.

Effect of electron acceptors on electricity production and desalination of caspian sea water using microbial desalination cells.

The Microbial Desalination Cell (MDC) stands out as an innovative and a sustainable technology for both renewable energy generation and water treatment. The choice of electron acceptor significantly influences the efficiency of electricity flow. This study focuses on exploring the MDC performance under different conditions, including variations in cathode electron acceptors, initial pH levels, and hydraulic retention time (HRT). The investigation assesses simultaneous reduction of TDS and power generation from Caspian Sea water, a prominent saline water source in northern Iran, in both open-circuit (OC) and closed-circuit (CC) modes. The findings reveal that sodium hypochlorite, potassium permanganate, and potassium bromate as catholyte achieved TDS reduction rates of 84%, 77%, and 72%, respectively, under CC conditions at pH 5. Furthermore, it was observed that increasing HRT and pH levels lead to a decrease in desalination efficiency and power generation. Notably, the study highlights that the maximum power density was attained using permanganate, hypochlorite, and bromate as catholyte in both OC and CC configurations. By showcasing the adaptability of MDC performance with different cathode electron acceptors under varying conditions, this research offers valuable insights for optimizing MDC efficiency when treating real saline water sources.

Ultra-antiwetting Membrane for Hypersaline Water Crystallization in Membrane Distillation.

Membrane distillation (MD) has great potential in the management of hypersaline water for zero liquid discharge (ZLD) due to its high salinity tolerance. However, the membrane wetting issue significantly restricts its practical application. In this study, a composite membrane tailored for extreme concentrations and even crystallization of hypersaline water is synthesized by coating a commercial hydrophobic porous membrane with a composite film containing a dense polyamide layer, a cation exchange layer (CEL), and an anion exchange layer (AEL). When used in direct contact MD for treating a 100 g L-1 NaCl hypersaline solution, the membrane achieves supersaturation of feed solution and a salt crystal yield of 38.0%, with the permeate concentration at <5 mg L-1. The composite membrane also demonstrates ultrahigh antiwetting stability in 360 h of long-term operation. Moreover, ion diffusion analysis reveals that the ultrahigh wetting resistance of the composite membrane is attributed to the bipolar AEL and CEL that eliminate ion crossover. The literature review elucidates that the composite membrane is superior to state-of-the-art membranes. This study demonstrates the great potential of the composite membrane for direct crystallization of hypersaline water, offering a promising approach to filling the gap between reverse osmosis and conventional thermal desalination processes for ZLD application.

Assembled Wood-Polyester Fabric-Hydrogel Janus Evaporator for Sustainable Seawater Desalination.

Solar-driven interfacial evaporation technology is a novel and efficient desalination process that helps alleviate the global shortage of freshwater resources. We developed a Janus evaporator assembled from cotton hydrogel, hydrophilic polyester fabric (PF), and Hydrophobic Wood (PW). By doping graphene oxide and TiO2 as light-absorbing materials within the hydrogel, we achieved a high absorptivity of over 90% across the entire solar spectrum. The hydrophilically modified PF, combined with the PW substrate, provided robust water transport and reduced thermal losses. Subsequent optical path simulations using TracePro74 software verified that the sawtooth light-trapping design of the wood substrate increased multiple light reflections and absorption (compared to a flat structure), enhancing light absorption capabilities. The sawtooth interface also enlarged the evaporation area, further boosting evaporation performance. The cleverly designed evaporator exhibited an evaporation rate of 1.722 kg m-2 h-1 and an efficiency of 83.1% under 1 sun irradiation. Additionally, after applying polydimethylsiloxane to the single surface of the photothermal hydrogel for low surface energy treatment, the resulting Janus structure demonstrated asymmetric wettability that prevented salt ions from accumulating on the irradiated interface. After 8 h of continuous evaporation in saline water (10 wt %), only slight salt crystallization occurred at the edges. The evaporator maintained long-term stability during a 15 day cyclic test, and the produced freshwater fully met the relevant drinking water standards. The components of the evaporator are characterized by simple fabrication, low cost, and eco-friendliness, offering significant application potential in the global context of energy conservation and emission reduction initiatives.

Low-Resistance Membrane vs. High-Resistance Membrane Performance Utilizing Electrodialysis-Evaporator Hybrid System in Treating Reject Brine from Kuwait Desalination Plants.

This work is an effort to mitigate the existing environmental issues caused by brine discharge from Kuwait's desalination plants and to find an economical and efficient way of managing reject brine from local desalination plants. Low- and high-resistance membranes (LRMs and HRMs, respectively) were used to produce salt and low-salinity water from brine effluent utilizing an electrodialysis (ED)-evaporator hybrid system. The effect of high current densities of 300, 400, and 500 A/m2 and brine flowrates of 450 and 500 L/h on the quality of produced salt and diluate were investigated for LRM and HRM. The recovered salt purity for LRM is up to 90.58%. Results show that the low-resistance membrane (LRM) achieved higher water recovery, energy consumption, desalination rate, operation time and ion removal rate than those of the high-resistance membrane (HRM) under the same operating conditions. The difference in concentration for 300 A/m2 between LRM and HRM increased from 0.93% at 10 min to 8.28% at 140 min. The difference in diluate concentration effluent is negligible for both membranes, whereas LRM produced higher concentrate effluent than HRM for all current densities and low flowrate (400 L/h). The maximum difference between LRM and HRM (with LRM achieving higher concentrations) is 10.7% for 400 A/m2. The permselectivity of LRM for monovalent cations decreased with current density, whereas the effect on permselectivity for HRM was insignificant for the current density values. The addition of a neutral cell was effective in reducing the buildup of divalent ions on the inner membrane of the cathode side.

Simultaneous Salt Rejection and Heat Localization Via Engineering Macrochannels in Morning Glory-Shaped 3D Evaporator.

Solar desalination is a promising solution for alleviating water scarcity due to its low-cost, environmentally friendly, and off-grid capabilities. However, simultaneous salt rejection and heat localization remain challenging, as the rapid salt convection often results in considerable heat loss. Herein, this challenge is overcome via a facile design: i) isolating high-temperature and high-salt zones by rationally designing morning glory-shaped wick structures and ii) bridging high-salt zones and bulk water with low-tortuosity macrochannels across low-temperature surfaces. The salinity gradient in the macrochannels passively triggers convective flow, facilitating the rapid transfer of salt ions from the high-salt zone to the bulk water. Meanwhile, the macrochannels are spatially isolated from the high-temperature zone, preventing heat loss during salt convection and thereby achieving a high evaporation rate (≈3 kg m-2 h-1) and superior salt rejection even in highly concentrated real seawater. This work provides new insights into salt rejection strategies and advances practical applications for sustainable seawater desalination.

Bifunctional Janus Membranes for Multicomponent Contaminated Seawater Separation and Recovery.

Solar-driven interface desalination has emerged as a promising strategy to address the global freshwater shortage crisis. However, the separation and recovery of multicomponent oil-contaminated seawater remain a key challenge. This study reports a novel high-strength Janus photothermal membrane with a unique reverse wettability design. On one side, the membrane has hydrophilic and oleophobic properties, while on the other, it has hydrophobic and oleophilic characteristics. The Janus membrane demonstrates dual functionality: solar desalination and oil-water separation. This dual functionality enables efficient separation and recovery of four components from contaminated seawater: purified water, salt crystals, light oil, and heavy oil. As a result, the Janus membrane achieves an evaporation rate of 2.06 kg m-2 h-1 under 1.0 sun. The ion (Na+, K+, Ca2+, and Mg2+) removal rate approaches 100% with nearly complete recovery of salt crystals. Furthermore, various types of oils can be accurately separated, with separation efficiency approaching 100%. An integrated separation device successfully separates and recovers the four components. This research presents significant potential for efficient separation and recovery of complex components in oil-contaminated seawater.

Salt Resistant PPy/MXene Flexible Waffle Type Fabric for Efficient Solar Evaporation and Water Purification Production.

In recent years, with the development of solar seawater desalination technology, many solar evaporators are affected by precipitated salts during the evaporation process, which can reduce efficiency. In this work, flexible fabrics made of polypyrrole (PPy)/MXene are obtained by impregnating the prepared PPy ink onto waffle like fabrics. The combination of PPy and fabric greatly improves the water absorption and evaporation performance of the fabric. The average evaporation rate of this structure is 1.43 kg m-2 h-1, and the average evaporation efficiency under a single light source is 85.13%. After a 15-h testing cycle and a total of 8 cycles, lasting nearly 120 h, the performance of the device remained stable. The structural characteristics of waffle fabric, based on the Marangoni thermal effect, make it possible to suppress salt precipitation during evaporation, avoiding large salt particles covering the evaporation surface and reducing efficiency. This experiment successfully demonstrated long-term stable water evaporation, providing new ideas for the development of fabric evaporators.

Performance analysis of snail shell biomaterials in solar still for clean water production: nature-inspired innovation for sustainability.

In this current investigation, the experimental performance of a solar still basin was significantly enhanced by incorporating snail shell biomaterials. The outcomes of the snail shell-augmented solar still basin (SSSS) are compared with those of a conventional solar still (CSS). The utilization of snail shells proved to facilitate the reduction of saline water and enhance its temperature, thereby improving the productivity of the SSSS. Cumulatively, the SSSS productivity was improved by 4.3% over CSS. Furthermore, the SSSS outperformed in energy and exergy efficiency of CSS by 4.5 and 3.5%, respectively. Economically, the cost per liter of distillate (CPL) for the CSS was 3.4% higher than SSSS. Moreover, the SSSS showed a shorter estimated payback period (PBP) of 141 days which was 6 days less than CSS. Considering the environmental impact, the observed CO2 emissions from the SSSS were approximately 14.6% higher than CSS over its 10-year lifespan. Notably, the SSSS exhibited a substantial increase in the estimated carbon credit earned (CCE) compared to the CSS. Ultimately, the research underscores the efficacy of incorporating snail shells into solar still basins as a commendable approach to organic waste management, offering economic benefits without compromising environmental considerations.

Enhanced forward osmosis desalination of brackish water using phase-separating ternary organic draw solutions of hydroxypropyl cellulose and propylene glycol propyl ether.

This study introduces draw solutions for application in forward osmosis (FO) processes, combining mono propylene glycol propyl ether (PGPE) with the cellulose derivative hydroxypropyl cellulose (HPC). A total of 16 unique single-solute and ternary organic draw solutions were prepared and evaluated, leading to the selection of three promising solutions for further investigation. Notably, eight of the initial organic draw solutions demonstrated osmotic pressures exceeding 2.4 MPa. The dynamic viscosities of all draw solutions exhibited a significant reduction with increasing temperature. Among the investigated solutions, the 0.25HPC-3.75PGPE demonstrated the most favorable FO performance, achieving average experimental water fluxes of 11.062 and 9.852 Lm-2 h-1 (LMH) against a 1 g/L NaCl brackish feed solution across two FO runs. PRACTITIONER POINTS: Hydroxypropyl cellulose (HPC, MW ~100,000) was mixed with propylene glycol propyl ether (PGPE) as draw solutes for FO processes. Seven combinations of HPC and PGPE produced osmolalities greater than 1000 mOsm/kg. 0.5HPC-7.5PGPE ternary draw solution achieved experimental water fluxes of 11.062 and 9.852 LMH against 1 g/L NaCl brackish feed solution. Leveraging the LCSTs of these ternary organic solutions holds promise for improved separation and regeneration processes.

Superelastic Polymer Aerogel with Superamphiphilicity.

Elastic aerogels have become a research hot spot in both academia and industry recently. The reported elastic aerogels are all made of hard materials by controlling their shapes. Herein we report an elastic aerogel made of a polymer elastomer with entropy elasticity. In the aerogel, cross-linked carboxyl nitrile rubber nanoparticles with hydrophilicity are dispersed in hydrophobic derivative of styrene-maleic anhydride alternating copolymer, forming a very special micro-nano surface structure with hydrophilic protrusions and hydrophobic depressions on the aerogel wall; therefore, the aerogel is not only superelastic but also superamphiphilic. A leak-free phase-change composite was prepared using the aerogel and paraffin, which can maintain at phase change temperature of paraffin for a longer time than the traditional one. The aerogel is also extremely suitable for desalination evaporators in solar-driven interfacial evaporation technology due to its superamphiphilicity, superelasticity, and ability to absorb sunlight. Exceptional evaporation rate of 2.78 kg·m-2·h-1 and evaporation efficiency of 170% could be reached even without using expensive light-absorbing materials. The evaporation rate exceeds that of most evaporators with expensive light-absorbing materials, and the evaporation efficiency exceeds the theoretical limit of conventional 2D solar evaporators. Both the phase-change composite and the evaporator can be easily recovered because the novel superelastic aerogel reported in this work is also recyclable.

A novel mathematical model for simultaneous optimization of desalination plant location and water distribution network; A case study.

In recent decades, water scarcity has turned into a serious problem spanning many countries, now even capable of causing or inflaming ethnic and national conflicts. While our planet has very limited freshwater resources, it has huge amounts of saltwater in seas and oceans. There is a very limited number of ways that can make saltwater drinkable, the most important of them is desalination. This study aimed to provide a method for the simultaneous optimization of desalination plant location and its water distribution network based on mathematical modeling. For this purpose, the authors formulated a non-linear mathematical model with the objective of minimizing the costs of water production and transmission. A genetic algorithm was also developed for solving the proposed nonlinear model. The method was used in a case study of Sistan and Baluchestan, which is one of Iran's most water stressed provinces. The proposed genetic algorithm managed to provide an acceptable solution for this problem in 3.74 s. The best solution was found to be constructing a desalination facility with a capacity of 394,052 cubic meters per day in a single location, that is, the city of Chabahar. The water transmission lines needed for transporting water to other parts of the province and their capacities were also determined.

Design of MOF-Based Solar Evaporators with Hierarchical Microporous/Nanobridged/Nanogranular Structures for Rapid Interfacial Solar Evaporation and Fresh Water Collection.

Interfacial solar evaporation (ISE) holds considerable promise to solve fresh water shortage, but it is challenging to achieve high evaporation rate (Reva) and fresh water yield in close system. Here, we report design and preparation of MOF-based solar evaporators with hierarchical microporous/nanobridged/nanogranular structures for rapid ISE and fresh water collection in close system. The evaporators are fabricated by growing silicone nanofilaments with variable length as nanobridges on a microporous silicone sponge followed by grafting with polydopamine nanoparticles and Cu-MOF nanocrystals. Integration of the unique structure and excellent photothermal composites endows the evaporators with high Reva of 3.5-20 wt% brines (3.60-2.90 kg m-2 h-1 in open system and 2.38-1.44 kg m-2 h-1 in close system) under simulated 1 sun, high Reva under natural sunlight, excellent salt resistance and high fresh water yield, which surpass most state-of-the-art evaporators. Moreover, when combined with a superhydrophilic cover, the evaporators show much higher average Reva of real seawater, remarkable fresh water yield and excellent long-term stability over one month continuous ISE under natural sunlight. The findings here will promote the development of advanced evaporators via microstructure engineering and their real-world ISE applications.