Catalyst- and Solvent-Free Upcycling of Poly(Ethylene Terephthalate) Waste to Biodegradable Plastics.

Poly(ethylene terephthalate) (PET) is an important polymer with annual output second only to polyethylene. Due to its low biodegradability, a large amount of PET is recycled for sustainable development. However, current strategies for PET recycling are limited by low added value or small product scale. It is urgent to make a breakthrough on the principle of PET macromolecular reaction and efficiently prepare products with high added value and wide applications. Here, the catalyst- and solvent-free synthesis of biodegradable plastics are reported through novel carboxyl-ester transesterification between PET waste and bio-based hydrogenated dimer acid (HDA), which can directly substitute some terephthalic acid (TPA) units in PET chain by HDA unit. This macromolecular reaction can be facilely carried out on current equipment in the polyester industry without any additional catalyst and solvent, thus enabling low-cost and large-scale production. Furthermore, the product semi-bio-based copolyester shows excellent mechanical properties, regulable flexibility and good biodegradability, which is expected to substitute poly(butylene adipate-co-terephthalate) (PBAT) plastic as high value-added biodegradable materials. This work provides an environmental-friendly and economic strategy for the large-scale upcycling of PET waste.

A matter of smell: The complex regulation of aroma production in melon.

Melon fruit flavor is one of the most valuable traits for consumers. Aroma, formed by volatile organic compounds (VOCs), is a major component of flavor but has been neglected in breeding programs because of its complex regulation. Although the genetic regulation of VOCs biosynthesis is not fully understood, several advances have been recently achieved. VOCs originate from the degradation of fatty acids, aminoacids and terpenes, and the role of newly described enzymes, transcription factors and putative regulators is here discussed. Furthermore, ethylene plays a key role in fruit aroma production in melon, triggering the conversion of green-flavored aldehydes into fruity-flavored esters. A current challenge is to understand the ethylene-independent regulation of VOCs formation. Environmental conditions and human processing can also shape the melon volatile profile, and future research should focus on studying the effect of climate change in aroma formation.

Assessing the adsorption of a diverse range of pharmaceuticals to virgin and aged poly (ethylene terephthalate) microplastics in different environmental matrices.

In this study, the adsorption of a mixture of high-consumed drugs onto virgin and aged PET microplastics has been studied for the time ever. The target mixture comprised two anti-inflammatory drugs, diclofenac and ketoprofen, one anti-hypertensive, valsartan, and four common antibiotics, indomethacin, trimethoprim, isoniazid, and metronidazole. Two types of PET MPs (virgin and UV-aged) were used in the experimental procedure. Kinetic studies were conducted, and adsorption isotherms were obtained revealing the possible interactions that take place between adsorbents and adsorbates. Among the studied pharmaceuticals, diclofenac presents the highest uptake due to its hydrophobic nature, while aging appears to induce the adsorption of the drugs in MPs. Factors like pH or the environmental matrix were also evaluated. The results revealed that sorption is pH-dependent, while more complicated matrices like wastewater or seawater exhibit lower uptake than distilled water due to the natural organic matter present or the increased salinity, respectively. Finally, desorption studies were also conducted in three different aqueous solutions examining the pH effect. The desorption of the compounds was higher for diclofenac, followed by valsartan, and ketoprofen. The desorption percentages of antibiotics were quite low.

CF3-Substituted Ethylene Carbonates for High-Voltage/High-Energy Rechargeable Lithium Metal-LiNi0.8Co0.1Mn0.1O2 Batteries.

The development of advanced liquid electrolytes for high-voltage/high-energy rechargeable Li metal batteries is an important strategy to attain an effective protective surface film on both the Li metal anode and the high-voltage composite cathode. Herein, we report a study of two CF3-substituted ethylene carbonates as components of the electrolyte solutions for Li metal|NCM811 cells. We evaluated trifluoromethyl ethylene carbonate (CF3-EC) and trans-ditrifluoromethylethylene carbonate Di-(CF3)-EC as cosolvents and additives to the electrolyte solutions. Using CF3-substituted ethylene carbonates as additives to a fluoroethylene carbonate (FEC)-based electrolyte solution enables improved capacity retention of high-power Li metal|NCM811 cells. The composition of the products from the transformations of CF3-EC and Di-(CF3)-EC in Li|NCM811 cells was studied by FTIR, XPS, and 19F NMR spectroscopy. We concluded that fluorinated Li alkyl carbonates are the main reaction products formed from these cyclic carbonates during the cycling of Li|NCM 811 cells, and fragmentation of the ring with the formation of CO2, CO, or olefins is not characteristic of CF3-substituted ethylene carbonates. The NCM 811 cathodes and Li metal anodes were characterized by X-ray diffraction, SEM, XPS, and FTIR spectroscopy. The role of CF3-substituted ethylene carbonate additives in stabilizing high energy density secondary batteries based on Li metal anodes was discussed. A bright horizon for developing sustainable rechargeable batteries with the highest possible energy density is demonstrated.

Production of Jet Fuel Range Aromatics by Alkylation of Benzene with Olefins over Bifunctional Ga/ZSM-5 Catalyst.

Aromatic components of C8-C15 are playing indispensable roles in multi-functional properties of jet fuel. Here, we reported the controllable alkylation of benzene with mixed olefins of ethylene and propylene toward C8-C15 aromatic hydrocarbons for jet fuels over the bifunctional Ga/ZSM-5 catalyst. The resultant 2Ga/ZSM-5 exhibited a superior selectivity of 86.4% (yield of 55.5%) to C8-C15 range aromatics, at benzene conversion of 40.3%, ethylene and propylene conversion of 99.5% and 99.2%, respectively. The incorporation of Ga species could effectively weaken the strong acid sites of ZSM-5 and endow 2Ga/ZSM-5 catalyst with appropriate acidity, therefore facilitating the benzene alkylation process and suppressing the undesired hydrogen transfer or aromatization side reactions as well, thus improving the yield of desired C8-C15aromatics for jet fuels. This work provided insight into the development of promising bifunctional catalyst for the oriented transformation of biomass-derived chemicals to aviation fuels.

Customized Li+ Solvation Sheath at the Poly(ethylene oxide)-Based Electrolyte/Ultrahigh-Nickel Cathode Interface toward Room-Temperature Solid-State Lithium Batteries.

The matching of poly(ethylene oxide) (PEO)-based electrolytes with ultrahigh-nickel cathode materials is crucial for designing new-generation high-energy-density solid-state lithium metal batteries (SLMBs), but it is limited by serious interfacial side reactions between PEO and ultrahigh-nickel materials. Here, a high-concentration electrolyte (HCE) interface with a customized Li+ solvation sheath is constructed between the cathode and the electrolyte. It induces the formation of an anion-regulated robust cathode/electrolyte interface (CEI), reduces the unstable free-state solvent, and finally achieves the compatibility of PEO-based electrolytes with ultrahigh-nickel cathode materials. Meanwhile, the corrosion of the Al current collector caused by lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) ions is prevented by lithium difluoro(oxalato)borate (LiDFOB) ions. The synergistic effect of the double lithium salt is achieved by a well-tailored ratio of TFSI- and DFOB- in the first solvation sheath of Li+. Compared with reported PEO-based SLMBs matched with ultrahigh-nickel (Ni ≥ 90%) cathodes, the SLMB in this work delivers a high discharge specific capacity of 216.4 mAh g-1 (0.1C) even at room temperature. This work points out a direction to optimize the cathode/electrolyte interface.

Anionic Metal-Organic Framework Derived Cu Catalyst for Selective CO2 Electroreduction to Hydrocarbons.

Metal-organic frameworks (MOFs)-related Cu materials are promising candidates for promoting electrochemical CO2 reduction to produce valuable chemical feedstocks. However, many MOF materials inevitable undergo reconstruction under reduction conditions; therefore, exploiting the restructuring of MOF materials is of importance for the rational design of high-performance catalyst targeting multi-carbon products (C2). Herein, a facile solvent process is choosed to fabricate HKUST-1 with an anionic framework (a-HKUST-1) and utilize it as a pre-catalyst for alkaline CO2RR. The a-HKUST-1 catalyst can be electrochemically reduced into Cu with significant structural reconstruction under operating reaction conditions. The anionic HKUST-1 derived Cu catalyst (aHD-Cu) delivers a FEC2H4 of 56% and FEC2 of ≈80% at -150 mA cm-2 in alkaline electrolyte. The resulting aHD-Cu catalyst has a high electrochemically active surface area and low coordinated sites. In situ Raman spectroscopy indicates that the aHD-Cu surface displays higher coverage of *CO intermediates, which favors the production of hydrocarbons.

Discovery of candidate genes involved in ethylene biosynthesis and signal transduction pathways related to peach bud cold resistance.

Background: Low temperature pose significant challenges to peach cultivation, causing severe damage to peach buds and restricting production and distribution. Ethylene, an important phytohormone, plays a critical role in enhancing plant cold resistance. Structural genes and transcription factors involved in ethylene biosynthesis and signal transduction pathways are associated with cold resistance. However, no research has specifically addressed their roles in peach cold resistance. Methods: In this study, we aimed for cold-resistance gene discovery in cold-sensitive peach cultivar "21Shiji" (21SJ) and cold-resistance cultivar "Shijizhixing" (SJZX) using RNA-seq and gas chromatography. Results: The findings revealed that under cold stress conditions, ethylene biosynthesis in "SJZX" was significantly induced. Subsequently, a structural gene, PpACO1-1, involved in ethylene biosynthesis in peach buds was significantly upregulated and showed a higher correlation with ethylene release rate. To identify potential transcription factors associated with PpACO1-1 expression and ethylene signal transduction, weighted gene co-expression network analysis was conducted using RNA-seq data. Four transcription factors: PpERF2, PpNAC078, PpWRKY65 and PpbHLH112, were identified. Conclusion: These findings provide valuable theoretical insights for investigating the regulatory mechanisms of peach cold resistance and guiding breeding strategies.

Synergistic effect of TiO2 nanoparticles and poly (ethylene-co-vinyl acetate) on the morphology and crystallization behavior of polylactic acid.

The impact of adding ethylene vinyl acetate copolymer (EVA 80) and 1 wt% TiO2 nanoparticles on the morphology and crystallization behavior of poly(lactic acid) blends was investigated using DSC, SEM, and POM. Thermal analysis revealed the enhancement of crystallinity of PLA in the presence of TiO2 and higher EVA 80 content in the blend. The PLA and EVA 80 components showed compatibility, as evidenced by the shift of the glass transition temperatures of the PLA phase in the blend to lower values compared to neat PLA. The lower temperature shift of the cold crystallization of the PLA and the formation of the small spherulites of the PLA in the blends indicated that the EVA 80 and TiO2 act as a nucleating agent for crystallization. The non-isothermal crystallization parameters of the composites were evaluated using Avrami's modified model, the MO approach, and Friedman's isoconversional method. The Avrami's modified rate constant (K) and the effective activation energy values significantly increased with the incorporation of EVA 80 and TiO2 nanoparticles. Furthermore, the thermogravimetric analysis (TGA) showed improved thermal stability of PLA by adding EVA 80 and TiO2.

Safety assessment of the process Lietpak, based on the EREMA MPR technology, used to recycle post-consumer PET into food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Lietpak (EU register number RECYC327), which uses the EREMA MPR technology. The input material is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, including no more than 5% PET from non-food consumer applications. The flakes are heated in a ■■■■■ reactor under vacuum. Having examined the challenge test provided, the Panel concluded that the ■■■■■ decontamination (step 2), for which a challenge test was provided, is critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of this step are temperature, pressure and residence time. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 µg/kg food, derived from the exposure scenario for infants, when such recycled PET is used at up to 100%. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs, including drinking water, for long-term storage at room temperature or below, with or without hotfill. Articles made of this recycled PET are not intended to be used in microwave or conventional ovens and such uses are not covered by this evaluation.

Synergistic C2H2 Binding Sites in Hydrogen-Bonded Supramolecular Framework for One-step C2H4 Purification from Ternary C2 Mixture.

Purification of C2H4 from the ternary C2 hydrocarbon mixture in one step is of critical significance but still extremely challenging according to its intermediate physical properties between C2H6 and C2H2. Hydrogen-bonded organic frameworks (HOFs) stabilized by supramolecular interactions are emerging as a new kind of adsorbents that facilitate green separation. However, it remains a problem to efficiently realize the one-step C2H4 purification from C2H6/C2H4/C2H2 mixture because of the low C2H2/C2H4 selectivity. We herein report a robust microporous HOF (termed as HOF-TDCPB) with dense O atoms and aromatic rings distributed on the pore surface which provide C2H6 and C2H2 preferred environment simultaneously. Dynamic breakthrough experiments indicate that HOF-TDCPB can not only obtain high-purity C2H4 from binary C2 mixture, but also firstly realize one-step C2H4 purification from ternary C2H6/C2H4/C2H2 mixture, with the C2H4 productivity of 3.2 L/kg (>99.999%) for one breakthrough cycle. Furthermore, HOF-TDCPB displays outstanding stability in air, organic solvents and water, which endow it excellent cycle performance even under high-humidity conditions. Theoretical calculations indicate that multiple O sites on pore channels can create synergistic binding sites for C2H2, thus affording overall stronger multipoint interactions.

Potential of an Amphiphilic Artificial Corneal Endothelial Layer as a Replacement Option for Damaged Corneal Endothelium.

Bullous keratopathy, a condition severely impacting vision and potentially leading to corneal blindness, necessitates corneal transplantation. However, the shortage of donor corneas and complex surgical procedures drive the exploration of tissue-engineered corneal endothelial layers. This study develops a transparent, amphiphilic, and cell-free membrane for corneal endothelial replacement. The membrane, securely attached to the posterior surface of the cornea, is created by mixing hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethylacrylate (EGDMA) in a 10:1 ratio. A 50 µL volume is used to obtain a 60 µm hydrophobic membrane on both sides, with one side treated with a polyvinylpyrrolidone (PVP) solution. The resulting membrane is transparent, foldable, biocompatible, amphiphilic, and easily handled. When exposed to 20% sulfur hexafluoride (SF6), the hydrophilic side of the membrane adheres tightly to the corneal Descemet's membrane, preventing water absorption into the corneal stroma, and thus treating bullous keratopathy. Histological test confirms its effectiveness, showing normal corneal structure and low inflammation when implanted in rabbits for up to 100 d. This study showcases the potential of this membrane as a viable option for corneal endothelial replacement, offering a novel approach to address donor tissue scarcity in corneal transplantation.

Exploring yeast biodiversity and process conditions for optimizing ethylene glycol conversion into glycolic acid.

Plastics have become an indispensable material in many fields of human activities, with production increasing every year; however, most of the plastic waste is still incinerated or landfilled, and only 10% of the new plastic is recycled even once. Among all plastics, polyethylene terephthalate (PET) is the most produced polyester worldwide; ethylene glycol (EG) is one of the two monomers released by the biorecycling of PET. While most research focuses on bacterial EG metabolism, this work reports the ability of Saccharomyces cerevisiae and nine other common laboratory yeast species not only to consume EG, but also to produce glycolic acid (GA) as the main by-product. A two-step bioconversion of EG to GA by S. cerevisiae was optimized by a design of experiment approach, obtaining 4.51 ± 0.12 g L-1 of GA with a conversion of 94.25 ± 1.74% from 6.21 ± 0.04 g L-1 EG. To improve the titer, screening of yeast biodiversity identified Scheffersomyces stipitis as the best GA producer, obtaining 23.79 ± 1.19 g L-1 of GA (yield 76.68%) in bioreactor fermentation, with a single-step bioprocess. Our findings contribute in laying the ground for EG up-cycling strategies with yeasts.

Polyfunctional Arylamine Based Nanofiltration Membranes with Enhanced Aggressive Organic Solvents Resistance.

Organic solvent nanofiltration (OSN) membranes with high separation performance and excellent stability in aggressive organic solvents are urgently desired for chemical separation. Herein, we utilized a polyfunctional arylamine tetra-(4-aminophenyl) ethylene (TAPE) to prepare a highly cross-linked polyamide membrane with a low molecular weight cut-off (MWCO) of 312 Da. Owing to its propeller-like conformation, TAPE formed micropores within the polyamide membrane and provided fast solvent transport channels. Importantly, the rigid conjugated skeleton and high connectivity between micropores effectively prevented the expansion of the polyamide matrix in aggressive organic solvents. The membrane maintained high separation performance even immersed in N,N-dimethylformamide for 90 days. Based on the aggregation-induced emission (AIE) effect of TAPE, the formation of polyamide membrane can be visually monitored by fluorescence imaging technology, which achieved visual guidance for membrane fabrication. This work provides a vital foundation for utilizing polyfunctional monomers in the interfacial polymerization reaction to prepare high-performance OSN membranes.

Soybean ethylene response factors GmENS1 and GmENS2 promote nodule senescence.

The final phase in root nodule development is nodule senescence. The mechanism underlying the initiation of nodule senescence requires further elucidation. Here, we investigated the intrinsic signals governing soybean (Glycine max L. Merr.) nodule senescence, uncovering ethylene as a key signal in this intricate mechanism. Two AP2/ERF transcription factor genes, GmENS1 and GmENS2 (Ethylene-responsive transcription factors required for Nodule Senescence), exhibit heightened expression levels in both aged nodules and nodules treated with ethylene. Overexpression of either GmENS1 or GmENS2 accelerated senescence in soybean nodules, whereas the knockout or knockdown of both genes delayed senescence and enhanced nitrogenase activity. Furthermore, our findings indicated that GmENS1 and GmENS2 directly bind to the promoters of GmNAC039, GmNAC018, and GmNAC030, encoding three NAC transcription factors essential for activating soybean nodule senescence. Notably, the nodule senescence process mediated by GmENS1 or GmENS2 overexpression was suppressed in the soybean nac039/018/030 triple mutant compared with the wild-type control. These data indicate GmENS1 and GmENS2 as pivotal transcription factors mediating ethylene-induced nodule senescence through the direct activation of GmNAC039/GmNAC018/GmNAC030 expression in soybean.

ECO-FRIENDLY TRANSFORMATION OF BIOETHANOL INTO ETHYLENE OVER BIMETALLIC NICKEL-COPPER CATALYSTS.

The conversion of bioethanol to ethylene in gas phase and atmospheric pressure was investigated over γ-Al2O3 supported copper and nickel catalysts. These catalysts were prepared by co-precipitation and pre-treated with hydrogen at 450 °C. Six catalysts were studied at 450 °C under a nitrogen atmosphere. It was found that the monometallic Cu/γ-Al2O3 catalyst exhibited the highest ethylene concentration, with a selectivity of around 90%. The bioethanol conversion obtained was between 57%-86%. Another catalyst that exhibited high concentration values was the NiCu1:7 bimetallic catalyst. The catalysts were characterised using XRD, SEM, EDS, TEM, TGA, FTIR, Raman, and N2-physisoption techniques. Furthermore, the Cu/γ-Al2O3 catalyst was studied under different reduction temperatures and gas flow conditions. It was found that the catalysts reduced at 350 °C and 35 ml/min N2 flow presented ethylene concentrations between (0.18-0.21) g/L. Moreover, the catalyst deactivation was identified to be first order and the equation of the Cu/γ-Al2O3 catalyst deactivation model was determined. Carbonaceous deposits over the used sample were not detected by Raman and FTIR. It was determined that the Cu/γ-Al2O3 catalyst deactivation could be mainly attributed to the blocking of the catalytic sites by strongly adsorbed compounds and hydroxylation of the catalyst surface.

Safety assessment of the process Fucine Film, based on the Reifenhäuser technology, used to recycle post-consumer PET into food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Fucine Film (EU register number RECYC322), which uses the Reifenhäuser technology. The input material consists of hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes mainly originating from collected post-consumer PET containers, including no more than 5% PET from non-food consumer applications. The flakes are extruded under vacuum into sheets. The recycled sheets are intended to be used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs, excluded drinking water and beverages, for long-term storage at room temperature, with or without hotfill. Based on the limited data available, the Panel concluded that the information submitted to EFSA was inadequate to demonstrate that the recycling process Fucine Film is able to reduce potential unknown contamination of the input PET flakes to a concentration that does not pose a risk to human health.

Genome-wide identification of the EIN3/EIL gene family in Ginkgo biloba and functional study of a GbEIL in the ethylene signaling pathway.

ETHYLENE-INSENSITIVE3 (EIN3) or EIN3-Like (EIL) proteins, play critical roles in integrating ethylene signaling and physiological regulation in plants by modulating the expression of various downstream genes, such as ethylene-response factors (ERFs). However, little is known about the characteristics of EIN3/EILs in the gymnosperm Ginkgo biloba. In the present study, a genome-wide comparative analysis of Ginkgo EIN3/EIL gene family was performed with those from an array of species, including bryophytes (Physcomitrella patens), gymnosperms (Cycas panzhihuaensis), and angiosperms (Arabidopsis thaliana, Gossypium raimondii, Gossypium hirsutum, Oryza sativa, and Brachypodium distachyon). Within the constructed phylogenetic tree for the 53 EIN3/EILs identified, 5 GbEILs from G. biloba, 2 PpEILs from P. patens, and 3 CpEILs from C. panzhihuaensis were assigned to one cluster, suggesting that their derivation occurred after the split of their ancestors and angiosperms. Although considerable divergence accumulated in amino acid sequences along with the evolutionary process, the specific EIN3_DNA-binding domains were evolutionarily conserved among the 53 EIN3/EILs. Collinearity analysis indicated that whole-genome or segmental duplication and subsequent purifying selection might have prompted the generation and evolution of EIN3/EIL multigene families. Based on the expression patterns of five GbEILs at the four developmental stages of Ginkgo ovules, one GbEIL gene (Gb_03292) was further investigated for its role in mediating ethylene signaling. The functional activity of Gb_03292 was closely related to ethylene signaling, as it complemented the triple response via ectopic expression in ein3eil1 double mutant Arabidopsis. Additionally, GbEIL likely modulates the expression of a Ginkgo ERF (Gb_15517) by directly binding to its promoter. These results demonstrated that the GbEIL gene could have participated in mediating ethylene signal transduction during ovule development in G. biloba. The present study also provides insights into the conservation of ethylene signaling across the gymnosperm G. biloba and angiosperm species.

Safety assessment of the process Guolong, based on the EREMA Basic technology, used to recycle post-consumer PET into food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Guolong (EU register number RECYC323), which uses the EREMA Basic technology. The input material is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, including no more than 5% PET from non-food consumer applications. The flakes are heated in a ■■■■■ reactor under vacuum before being extruded. Having examined the challenge test provided, the Panel concluded that the ■■■■■ decontamination (step 2), for which a challenge test was provided, is critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of this step are temperature, pressure and residence time. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migrations of 0.1 and 0.15 µg/kg food, derived from the exposure scenarios for infants and toddlers, when such recycled PET is used at up to 100%. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs, including drinking water, for long-term storage at room temperature or below, with or without hotfill. Articles made of this recycled PET are not intended to be used in microwave or conventional ovens and such uses are not covered by this evaluation.

Crystallization of Poly(ethylene terephthalate): A Review.

Poly(ethylene terephthalate) (PET) is a thermoplastic polyester with excellent thermal and mechanical properties, widely used in a variety of industrial fields. It is a semicrystalline polymer, and most of the industrial success of PET derives from its easily tunable crystallization kinetics, which allow users to produce the polymer with a high crystal fraction for applications that demand high thermomechanical resistance and barrier properties, or a fully amorphous polymer when high transparency of the product is needed. The main properties of the polymer are presented and discussed in this contribution, together with the literature data on the crystal structure and morphology of PET. This is followed by an in-depth analysis of its crystallization kinetics, including both primary crystal nucleation and crystal growth, as well as secondary crystallization. The effect of molar mass, catalyst residues, chain composition, and thermo-mechanical treatments on the crystallization kinetics, structure, and morphology of PET are also reviewed in this contribution.