Baicalin attenuated oxidative stress and inflammation in ethylene glycol-induced urolithiasis in adult male SD rats.

AIMS: Baicalin is a flavonoid derived from the root of the medicinal plant Scutellaria baicalensis Georgi (S. baicalensis) and is known for its various pharmacological properties. This study aimed to investigate the impact of baicalin (BAI) on the occurrence of kidney calcium oxalate crystal formation induced by ethylene glycol in male SD rats. MAIN METHODS: A rat model of renal stones was created and various concentrations of baicalin were used for intervention. Samples of urine, blood, and kidney tissue were taken from the rats, and they were euthanized for biochemical and histopathological examinations. KEY FINDINGS: Our results show that baicalin treatment improved the weight loss induced by ethylene glycol (EG) and ammonium chloride (AC) in rats. Baicalin also reduced the formation of calcium oxalate crystals and protected kidney function in rats with urolithiasis. Furthermore, it lowered the level of malondialdehyde (MDA) and elevated the activity of antioxidant enzymes compared to the stone control group. Additionally, baicalin notably alleviated renal inflammation in rats with urolithiasis. SIGNIFICANCE: The present study attributed clinical evidence first time that claiming the significant antiurolithic effect of baicalin and could be a cost-effective candidate for the prevention and treatment of urolithiasis.

Poly[poly(ethylene glycol) methacrylate]-modified starch-based solid and gel polymer electrolytes for high performance Li-ion batteries.

The idea of replacing liquid electrolytes with polymer electrolytes has been successful and the development of these electrolytes has provided acceptable results. With the start of using natural polymers in the polymer industry, as well as starch, these materials can be one of the most important candidates for the polymer matrix in electrolytes. In this study, starch has been investigated as a polymer electrolyte, poly[poly(ethylene glycol) methacrylate] (PEGMA) is grafted to the starch by radical polymerization, and synthesized copolymers are used as solid polymer electrolytes (SPEs). Furthermore, by adding N,N'-methylenebisacrylamide (MBA) as a cross-linking agent, gel polymer electrolytes (GPEs) are produced after swelling in the liquid electrolyte. After characterization, the synthesized polymer electrolytes are investigated in terms of electrochemical properties. The best ionic conductivity of 3.8 × 10-5 S cm-1 is obtained for SPEs whereas it is obtained 4.3 × 10-3 S cm-1 for GPEs at room temperature. The ion transfer number in the range of 0.47-0.91 confirms the compatibility between the electrolytes and electrode. Also, the prepared polymer electrolytes present excellent electrochemical properties, including, a wide electrochemical stability window above 4.7 V, good specific capacities in the range of 170-200 mAh g-1 with a storage capacity of more than 92 %, and Coulombic efficiency of about 98 % after 100 cycles at 0.2 C.

Using Porous Liquids to Perform Liquid-Liquid Separations.

Porous liquids are new types of fluid sorbent investigated mainly for the separation of gas mixtures. Here, we explore their application to the separation of miscible liquids, MEG (monoethylene glycol)/water and EtOH/water) as proof of principle. Recovery of used MEG is industrially important but its extraction from water is difficult. PLs ZIF 8@PDMS (PL1, PDMS = polydimethylsilicone) or ZIF-8@sesame oil (PL2) each consisting of 25wt% of the hydrophobic microporous material ZIF-8 dispersed in PDMS/sesame oil, were formulated and found to be exceedingly physically stable. 5 nm PEEK membranes were used to provide permeable barriers between the PL and the alcohol/water phase. MEG was selectively extracted through the membrane from 50wt% MEG/water mixtures into the PL phase. It was effective for MEG/water mixtures as dilute as 3:97wt%. The PL could be regenerated and re-used, suggesting its potential for continuous cyclic extraction. Furthermore, PL3 (silicalite-1@PDMS) has demonstrated effectiveness in achieving selective alcohol extraction from beverages. It shows great potential for lowering the alcohol concentration in gin/wine due to its excellent chemical stability and nontoxicity. Overall, the enhanced adsorption properties of PLs due the presence of empty pores, which provides unusually high gas solubilities, also makes them, in principle, applicable to liquid-liquid separations.

Rapid availability of ethylene glycol test results with enzymatic assay.

BACKGROUND: Ethylene glycol poisoning causes metabolic acidosis, organ injury, and death. Ethylene glycol testing is unavailable in many areas. Our laboratory uses an automated glycerol dehydrogenase enzymatic assay to screen for ethylene glycol. We sought to determine how often ethylene glycol results were available within 12 h of the first dose of fomepizole. METHODS: Records from a single poison center were reviewed from December 2016 to December 2019. Cases were identified by searching for cases that received fomepizole. Outcomes included whether results were available within 12 h, and the turnaround time from time of laboratory order to result. RESULTS: Of the 125 cases of suspected toxic alcohol poisoning identified, 73 had screening for ethylene glycol by enzymatic assay. Results were available within 12 h of the initial fomepizole dose in 58 (79%) cases with a median turnaround time of 391 min. DISCUSSION: We have demonstrated clinically acceptable turnaround times using an automated screening ethylene glycol assay. The major limitations include lack of approval for this test at this time, the use of voluntarily reported poison center data, and lack of assessment of patient outcomes. CONCLUSION: Enzymatic screening for ethylene glycol yielded results within 12 h in 79% of cases.

Bioresorbable Polyester Coatings with Antifouling and Antimicrobial Properties for Prevention of Biofilm Formation in Early Stage Infections on Ti6Al4V Hard-Tissue Implants.

Implants made from titanium are used as prostheses because of their biocompatibility and their mechanical properties close to those of human bone. However, the risk of bacterial infection is always a major concern during surgery, and the development of biofilm can make these infections difficult to treat. A promising strategy to mitigate against bacterial infections is the use of antifouling and antimicrobial coatings, where bioresorbable polymers can play an important role due to their controlled degradability and sustained drug release, as well as excellent biocompatibility. In the present study, poly(d,l-lactide) (PDLLA) and poly[d,l-lactide-co-methyl ether poly(ethylene glycol)] (PDLLA-PEG) were studied, varying the PEG content (20-40% w/w) to analyze the effectiveness of PEG as an antifouling molecule. In addition, silver sulfadiazine (AgSD) was used as an additional antimicrobial agent with a concentration ≤5% w/w and incorporated into the PEGylated polymers to create a polymer with both antifouling and antimicrobial properties. Polymers synthesized were applied using spin coating to obtain homogeneous coatings to protect samples made from titanium/aluminum/vanadium (Ti6Al4V). The polymer coatings had a smoothing effect in comparison to that of the uncoated material, decreasing the contact area available for bacterial colonization. It was also noted that PEG addition into the polymeric chain developed amphiphilic materials with a decrease in contact angle from the most hydrophobic (Ti6Al4V) to the most hydrophilic PDLLA-PEG (60/40), highlighting the increase in water uptake contributing to the hydration layer formation, which confers the antifouling effect on the coating. This study demonstrated that the addition of PEG above 20% w/w and AgSD above 1% w/v into the formulation was able to decrease bacterial adherence against clinically relevant biofilm former strains Staphylococcus aureus and Pseudomonas aeruginosa.

Facilitating Formate Selectivity via Optimizing eg* Band Broadening in NiMn Hydroxides for Ethylene Glycol Electro-Oxidation.

Ethylene glycol electro-oxidation reaction (EGOR) on nickel-based hydroxides (Ni(OH)2) represents a promising strategy for generating value-added chemicals, i.e. formate and glycolate, and coupling water-electrolytic hydrogen production. The high product selectivity was one of the most significant area of polyols electro-oxidation process. Yet, developing Ni(OH)2-based EGOR electrocatalyst with highly selective product remains a challenge due to the unclear cognition about the EGOR mechanism. Herein, Mn-doped Ni(OH)2 catalysts were utilized to investigate the EGOR mechanism. Experimental and calculation results reveal that the electronic states of eg* band play an important role in the catalytic performance and the product selectivity for EGOR. Broadening the eg* band could effectively enhance the adsorption capacity of glyoxal intermediates. On the other hand, this enhanced adsorption could lead to reduced side reactions associated with glycolate formation, simultaneously promoting the cleavage of C-C bonds. Consequently, the selectivity for formate was notably augmented by these enhancements. This work offers new insights into the regulation of catalyst electronic states for improving polyol electrocatalytic activity and product selectivity.

Breaking Down the Barriers of Drug Resistance and Corneal Permeability with Chitosan-Poly(ethylene glycol)-LK13 Peptide Conjugate to Combat Fungal Keratitis.

Fungal keratitis (FK) is a leading cause of preventable blindness and eye loss. The poor antifungal activity, increased drug resistance, limited corneal permeability, and unsatisfactory biosafety of conventional antifungal eye drops are among the majority of the challenges that need to be addressed for currently available antifungal drugs. Herein, this study proposes an effective strategy that employs chitosan-poly(ethylene glycol)-LK13 peptide conjugate (CPL) in the treatment of FK. Nanoassembly CPL can permeate the lipophilic corneal epithelium in the transcellular route, and its hydrophilicity surface is a feature to drive its permeability through hydrophilic stroma. When encountering fungal cell membrane, CPL dissembles and exposes the antimicrobial peptide (LK13) to destroy fungal cell membranes, the minimum inhibitory concentration values of CPL against Fusarium solani (F. solani) are always not to exceed 8 µg peptide/mL before and after drug resistance induction. In a rat model of Fusarium keratitis, CPL demonstrates superior therapeutic efficacy than commercially available natamycin ophthalmic suspension. This study provides more theoretical and experimental supports for the application of CPL in the treatment of FK.

Thermal, Morphological, Mechanical, and Biodegradation Properties of Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)/High-Density Polyethylene Blends.

Polymer blends of poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) (PLLA-PEG-PLLA) and high-density polyethylene (HDPE) with different blend ratios were prepared by a melt blending method. The thermal, morphological, mechanical, opacity, and biodegradation properties of the PLLA-PEG-PLLA/HDPE blends were investigated and compared to the PLLA/HDPE blends. The blending of HDPE improved the crystallization ability and thermal stability of the PLLA-PEG-PLLA; however, these properties were not improved for the PLLA. The morphology of the blended films showed that the PLLA-PEG-PLLA/HDPE blends had smaller dispersed phases compared to the PLLA/HDPE blends. The PLLA-PEG-PLLA/HDPE blends exhibited higher flexibility, lower opacity, and faster biodegradation and bioerosion in soil than the PLLA/HDPE blends. Therefore, these PLLA-PEG-PLLA/HDPE blends have a good potential for use as flexible and partially biodegradable materials.

The catabolism of ethylene glycol by Rhodococcus jostii RHA1 and its dependence on mycofactocin.

Ethylene glycol (EG) is a widely used industrial chemical with manifold applications and also generated in the degradation of plastics such as polyethylene terephthalate. Rhodococcus jostii RHA1 (RHA1), a potential biocatalytic chassis, grows on EG. Transcriptomic analyses revealed four clusters of genes potentially involved in EG catabolism: the mad locus, predicted to encode mycofactocin-dependent alcohol degradation, including the catabolism of EG to glycolate; two GCL clusters, predicted to encode glycolate and glyoxylate catabolism; and the mft genes, predicted to specify mycofactocin biosynthesis. Bioinformatic analyses further revealed that the mad and mft genes are widely distributed in mycolic acid-producing bacteria such as RHA1. Neither ΔmadA nor ΔmftC RHA1 mutant strains grew on EG but grew on acetate. In resting cell assays, the ΔmadA mutant depleted glycolaldehyde but not EG from culture media. These results indicate that madA encodes a mycofactocin-dependent alcohol dehydrogenase that initiates EG catabolism. In contrast to some mycobacterial strains, the mad genes did not appear to enable RHA1 to grow on methanol as sole substrate. Finally, a strain of RHA1 adapted to grow ~3× faster on EG contained an overexpressed gene, aldA2, predicted to encode an aldehyde dehydrogenase. When incubated with EG, this strain accumulated lower concentrations of glycolaldehyde than RHA1. Moreover, ecotopically expressed aldA2 increased RHA1's tolerance for EG further suggesting that glycolaldehyde accumulation limits growth of RHA1 on EG. Overall, this study provides insights into the bacterial catabolism of small alcohols and aldehydes and facilitates the engineering of Rhodococcus for the upgrading of plastic waste streams.IMPORTANCEEthylene glycol (EG), a two-carbon (C2) alcohol, is produced in high volumes for use in a wide variety of applications. There is burgeoning interest in understanding and engineering the bacterial catabolism of EG, in part to establish circular economic routes for its use. This study identifies an EG catabolic pathway in Rhodococcus, a genus of bacteria well suited for biocatalysis. This pathway is responsible for the catabolism of methanol, a C1 feedstock, in related bacteria. Finally, we describe strategies to increase the rate of degradation of EG by increasing the transformation of glycolaldehyde, a toxic metabolic intermediate. This work advances the development of biocatalytic strategies to transform C2 feedstocks.

Novel aspects of ethylene glycol catabolism.

Ethylene glycol (EG) is an industrially important two-carbon diol used as a solvent, antifreeze agent, and building block of polymers such as poly(ethylene terephthalate) (PET). Recently, the use of EG as a starting material for the production of bio-fuels or bio-chemicals is gaining attention as a sustainable process since EG can be derived from materials not competing with human food stocks including CO2, syngas, lignocellulolytic biomass, and PET waste. In order to design and construct microbial process for the conversion of EG to value-added chemicals, microbes capable of catabolizing EG such as Escherichia coli, Pseudomonas putida, Rhodococcus jostii, Ideonella sakaiensis, Paracoccus denitrificans, and Acetobacterium woodii are candidates of chassis for the construction of synthetic pathways. In this mini-review, we describe EG catabolic pathways and catabolic enzymes in these microbes, and further review recent advances in microbial conversion of EG to value-added chemicals by means of metabolic engineering. KEY POINTS: • Ethylene glycol is a potential next-generation feedstock for sustainable industry. • Microbial conversion of ethylene glycol to value-added chemicals is gaining attention. • Ethylene glycol-utilizing microbes are useful as chassis for synthetic pathways.

Tuning Crystal Phase of Palladium-Selenium Nanowires for Enhanced Ethylene Glycol Electrocatalytic Oxidation.

Alcohol electrooxidation is pivotal for a sustainable energy economy. However, designing efficient electrocatalysts for this process is still a formidable challenge. Herein, palladium-selenium nanowires featuring distinct crystal phases: monoclinic Pd7Se2 and tetragonal Pd4.5Se for ethylene glycol electrooxidation reaction (EGOR) are synthesized. Notably, the supported monoclinic Pd7Se2 nanowires (m-Pd7Se2 NWs/C) exhibit superior EGOR activity, achieving a mass activity (MA) and specific activity (SA) of 10.4 A mgPd -1 (18.7 mA cm-2), which are 8.0 (6.7) and 10.4 (8.2) times versus the tetragonal Pd4.5Se and commercial Pd/C and surpass those reported in the literature. Furthermore, m-Pd7Se2 NWs/C displays robust catalytic activity for other alcohol electrooxidation. Comprehensive characterization and density functional theory (DFT) calculations reveal that the enhanced electrocatalytic performance is attributed to the increased formation of Pd0 on the high-index facets of the m-Pd7Se2 NWs, which lowers the energy barriers for the C─C bond dissociation in CHOHCHOH* and the CO* oxidation to CO2*. This study provides palladium-based alloy electrocatalysts exhibiting the highest mass activity reported to date for the electrooxidation of ethylene glycol, achieved through the crystalline phase engineering strategy.

Ultrafast Microwave-Assisted Synthesis of Porous NiCo Layered Double Hydroxide Nanospheres for High-Performance Supercapacitors.

Currently, new clean energy storage technology must be effective, affordable, and ecologically friendly so as to meet the diverse and sustainable needs of the energy supply. In this work, NiCo-LDH containing intercalated EG was successfully prepared within 210 s using an ultrafast microwave radiation technique. Subsequently, a series of characterization and systematic electrochemical tests were conducted to analyze the composition, structure, and energy storage mechanism of the NiCo-LDH material. The Ni:Co ratio of 5:5 results in the highest capacitance value of 2156 F/g at 1 A/g and an outstanding rate performance of 86.8% capacity retention rate at 10 A/g. The results demonstrated that the unique porous structure of NiCo-LDH and large layer spacing were conducive to more electrochemical reactions. Additionally, an electrochemical test was carried out on the NiCo-LDH as a hybrid supercapacitor electrode material, with NiCo-LDH-5:5 serving as the positive electrode and activated carbon as the negative electrode, the asymmetric supercapacitor can achieve a maximum energy density of 82.5 Wh kg-1 and power density of 8000 W kg-1. The NiCo-LDH-5:5//AC hybrid supercapacitors own 81.5% cycle stability and 100% coulombic efficiency after 6000 cycles at 10 A/g.

Thermal Stability of Dispersions of Amino-Functionalized Silica in Glycol and in 50-50 Aqueous Glycol.

Dispersions of amino-functionalized silica in ethylene glycol (EG) and in aqueous glycol show excellent stability at room temperature. Stability at elevated temperatures would be much desired with respect to their potential application as heat-transfer fluids. Amino-functionalized silica was dispersed in EG and in 50-50 aqueous EG by mass. HCl and acetic acid were added to enhance the positive ζ potential. The dispersions were stored at 40, 60, 80, and 100 °C for up to 28 days, and ζ potential and apparent particle radius were studied as a function of elapsed time. The particles showed a positive ζ potential in excess of 40 mV (Smoluchowski), which remained unchanged for 28 days. Such a high absolute value of ζ potential is sufficient to stabilize the dispersion against flocculation and sedimentation. The apparent particle radius in acidified dispersions was about 70 nm, and it was stable for 28 days. The particles were larger in pH-neutral dispersions. The apparent particle radius was about 80 nm in fresh dispersions and it increased on long storage at 80 and 100 °C.

Controlled Amphiphilicity and Thermo-Responsiveness of Functional Copolymers Based on Oligo(Ethylene Glycol) Methyl Ether Methacrylates.

In this work, comb homopolymers as well as comb-type copolymers of thermo-responsive oligo(ethylene glycol methyl ether methacrylate)s, OEGMAs, with various chain lengths (DEGMA, PEGMA500, and PEGMA950 containing 2, 9, or 19 repeating ethylene glycol units, respectively) were synthesized through free radical (co)polymerization. For the copolymers, either the functional hydrophobic glycidyl methacrylate (GMA) or the inert hydrophilic N,N-dimethylacrylamide (DMAM) were selected as comonomers. The self-assembly and thermo-responsive behavior of the products was investigated through Nile Red fluorescence probing, turbidimetry, and dynamic light scattering (DLS). Interestingly, it was found that all OEGMA-based homopolymers exhibit a tendency to self-organize in aqueous media, in addition to thermo-responsiveness. The critical aggregation concentration (CAC) increases with the number of repeating ethylene oxide units in the OEGMA macromonomers (CAC was found to be 0.003, 0.01, and 0.03% w/v for the homopolymers PDEGMA, PPEGMA500, and PPEGMA950, respectively). Moreover, the CAC of the copolymers in aqueous media is highly affected by the incorporation of hydrophobic GMA or hydrophilic DMAM units, leading to lower or higher values, respectively. Thus, the CAC decreases down to 0.003% w/v for the GMA-richest copolymer of PEGMA950, whereas CAC increases up to 0.01% w/v for the DMAM-richest copolymer of DEGMA. Turbidimetry and DLS studies proved that the thermo-sensitivity of the polymers is governed by several parameters such as the number of repeating ethylene glycol groups in the side chains of the OEGMAs, the molar percentage of the hydrophobic or hydrophilic comonomers, along with the addition of salts in the aqueous polymer solutions. Thus, the cloud point of the homopolymer PDEGMA was found at 23 °C and it increases to 33.5 °C for the DMAM-richest copolymer of DEGMA. Lastly, the formation of a hydrogel upon heating aqueous mixtures of the GMA-comprising copolymers with silica nanoparticles overnight is strong evidence of the functional character of these polymers.

Real-world safety and effectiveness of intravenous fomepizole in patients with ethylene glycol and methanol poisoning in Japan: results of a 7-year post-marketing surveillance study.

BACKGROUND: Fomepizole is a competitive alcohol dehydrogenase inhibitor used for the treatment of ethylene glycol and methanol poisoning. We evaluated the safety and effectiveness of fomepizole in patients with ethylene glycol or methanol poisoning in Japan. RESEARCH DESIGN AND METHODS: This retrospective post-marketing surveillance study conducted in Japan registered patients who received fomepizole intravenous infusion per the package insert (January 2015-June 2022). Endpoints included adverse drug reactions/infections (ADRs), arterial blood pH, and treatment outcomes. RESULTS: Of 147 patients registered (91 institutions), 131 and 126 were included in the safety and effectiveness analysis sets, respectively. Mean age was 43.6 years, and 66.4% were male. Mean time from poison ingestion to treatment was 15.1 hours; 66.4% received concomitant hemodialysis. No serious ADRs were reported. ADRs were reported in seven patients; the most-reported ADR was vomiting (2.3%). Seven patients died, 105 survived without sequelae, and 19 survived with sequelae. Most common sequelae were renal failure or renal dysfunction. Mean arterial blood pH increased to 7.4 by 4 hours of treatment, remaining stable for 24 hours post-treatment. CONCLUSIONS: Fomepizole is well tolerated and helps improve clinical outcomes in patients with ethylene glycol or methanol poisoning in Japan. TRIAL REGISTRATION: Japanese Pharmaceutical Information Center (JapicCTI-152817).

Preparation of Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)/Zinc Oxide Nanocomposite Bioplastics for Potential Use as Flexible and Antibacterial Food Packaging.

High-molecular-weight poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) (PLLA-PEG-PLLA) is a flexible and biodegradable bioplastic that has promising potential in flexible food packaging but it has no antibacterial ability. Thus, in this work, the effect of zinc oxide nanoparticles (nano-ZnOs) which have antimicrobial activity on various properties of PLLA-PEG-PLLA was determined. The addition of nano-ZnOs enhanced the crystallization, tensile, UV-barrier, and antibacterial properties of PLLA-PEG-PLLA. However, the crystallization and tensile properties of nanocomposite films decreased again as the nano-ZnO increased beyond 2 wt%. The nano-ZnO was well distributed in the PLLA-PEG-PLLA matrix when the nano-ZnO content did not exceed 2 wt% and exhibited some nano-ZnO agglomerates when the nano-ZnO content was higher than 2 wt%. The thermal stability and moisture uptake of the PLLA-PEG-PLLA matrix decreased and the film's opacity increased as the nano-ZnO content increased. The PLLA-PEG-PLLA/ZnO nanocomposite films showed good antibacterial activity against bacteria such as Escherichia coli and Staphylococcus aureus. It can be concluded that nano-ZnOs can be used as a multi-functional filler of the flexible PLLA-PEG-PLLA. As a result, the addition of nano-ZnOs as a nucleating, reinforcing, UV-screening, and antibacterial agent in the flexible PLLA-PEG-PLLA matrix may provide protection for both the food and the packaging during transportation and storage.

Machine learning analysis of thermophysical and thermohydraulic properties in ethylene glycol- and glycerol-based SiO2 nanofluids.

The study investigates the heat transfer and friction factor properties of ethylene glycol and glycerol-based silicon dioxide nanofluids flowing in a circular tube under continuous heat flux circumstances. This study tackles the important requirement for effective thermal management in areas such as electronics cooling, the automobile industry, and renewable energy systems. Previous research has encountered difficulties in enhancing thermal performance while handling the increased friction factor associated with nanofluids. This study conducted experiments in the Reynolds number range of 1300 to 21,000 with particle volume concentrations of up to 1.0%. Nanofluids exhibited superior heat transfer coefficients and friction factor values than the base liquid values. The highest enhancement in heat transfer was 5.4% and 8.3% for glycerol and ethylene glycol -based silicon dioxide Nanofluid with a relative friction factor penalty of ∼30% and 75%, respectively. To model and predict the complicated, nonlinear experimental data, five machine learning approaches were used: linear regression, random forest, extreme gradient boosting, adaptive boosting, and decision tree. Among them, the decision tree-based model performed well with few errors, while the random forest and extreme gradient boosting models were also highly accurate. The findings indicate that these advanced machine learning models can accurately anticipate the thermal performance of nanofluids, providing a dependable tool for improving their use in a variety of thermal systems. This study's findings help to design more effective cooling solutions and improve the sustainability of energy systems.

The Influence of Microstructure on TCR for Inkjet-Printed Resistive Temperature Detectors Fabricated Using AgNO3/Ethylene-Glycol-Based Inks.

This study investigated the influence of microstructure on the performance of Ag inkjet-printed, resistive temperature detectors (RTDs) fabricated using particle-free inks based on a silver nitrate (AgNO3) precursor and ethylene glycol as the ink solvent. Specifically, the temperature coefficient of resistance (TCR) and sensitivity for sensors printed using inks that use monoethylene glycol (mono-EG), diethylene glycol (di-EG), and triethylene glycol (tri-EG) and subjected to a low-pressure argon (Ar) plasma after printing were investigated. Scanning electron microscopy (SEM) confirmed previous findings that microstructure is strongly influenced by the ink solvent, with mono-EG inks producing dense structures, while di- and tri-EG inks produce porous structures, with tri-EG inks yielding the most porous structures. RTD testing revealed that sensors printed using mono-EG ink exhibited the highest TCR (1.7 × 10-3/°C), followed by di-EG ink (8.2 × 10-4/°C) and tri-EG ink (7.2 × 10-4/°C). These findings indicate that porosity exhibits a strong negative influence on TCR. Sensitivity was not strongly influenced by microstructure but rather by the resistance of RTD. The highest sensitivity (0.84 Ω/°C) was observed for an RTD printed using mono-EG ink but not under plasma exposure conditions that yield the highest TCR.

Advancing BiVO4 Photoanode Activity for Ethylene Glycol Oxidation via Strategic pH Control.

The photoelectrochemical (PEC) conversion of organic small molecules offers a dual benefit of synthesizing value-added chemicals and concurrently producing hydrogen (H2). Ethylene glycol, with its dual hydroxyl groups, stands out as a versatile organic substrate capable of yielding various C1 and C2 chemicals. In this study, we demonstrate that pH modulation markedly enhances the photocurrent of BiVO4 photoanodes, thus facilitating the efficient oxidation of ethylene glycol while simultaneously generating H2. Our findings reveal that in a pH = 1 ethylene glycol solution, the photocurrent density at 1.23 V vs. RHE can attain an impressive 7.1 mA cm-2, significantly surpassing the outputs in neutral and highly alkaline environments. The increase in photocurrent is attributed to the augmented adsorption of ethylene glycol on BiVO4 under acidic conditions, which in turn elevates the activity of the oxidation reaction, culminating in the maximal production of formic acid. This investigation sheds light on the pivotal role of electrolyte pH in the PEC oxidation process and underscores the potential of the PEC strategy for biomass valorization into value-added products alongside H2 fuel generation.

Partially PEG-Grafted Poly(Terphenyl Piperidinium) Anion Exchange Membranes with Balanced Properties for Alkaline Fuel Cells.

Poly(ethylene glycol) (PEG) or oligo (ethylene glycol) (OEG) grafted anion exchange membranes (AEMs) exhibit improved ionic conductivity, high alkaline stability, and subsequent boosted AEM fuel cell performance, but too much PEG/OEG side chains may can result in a reduction in the ion exchange capacity (IEC), which can have adverse effects on ion transport. Here, a series of partially PEG-grafted poly(terphenyl piperidinium) with different side chain length are synthesized using simple postpolymerization modification to produce AEMs with balanced properties. The polar and flexible PEG side chains are responsible for the controlled water uptake and swelling, superior hydroxide conductivity (122 mS cm-1 at 80 °C with an IEC of 1.99 mmol g-1), and enhanced alkaline stability compared to the reference sample without PEG grafts (PTP). More importantly, the performance of AEM fuel cell (AEMFC) with the membrane containing partial PEG side chains surpasses that with PTP membrane, demonstrating a highest peak power density of 1110 mW cm-2 at 80 °C under optimized conditions. This work provides a novel approach to the fabrication of high-performance AEM materials with balanced properties for alkaline fuel cell application.