Arsenic, Cadmium, and Lead Levels in School Meals and Their Risk Assessment in Municipalities in Bahia, Brazil.

BACKGROUND: School meals represent a significant supply of nutrients for children in Brazil, especially those in conditions of social vulnerability. OBJECTIVES: This study aimed to assess the levels of arsenic (As), cadmium (Cd), and lead (Pb) in meals served in public elementary schools in four municipalities in the state of Bahia, Brazil, and assess the risk posed to children's health. METHODS: Ninety-six samples were collected from 16 schools, freeze-dried, and subjected to microwave-assisted digestion. The As, Cd, and Pb levels were determined by graphite furnace atomic absorption spectrometry. The risk assessment was based on calculating each element's hazard quotient (HQ). RESULTS: None of the samples reached or exceeded the tolerable levels for the elements analyzed. Pb was the metal that obtained the most significant result, reaching maximum levels of 39-157 µg·kg-1. CONCLUSIONS: No element exceeded the PTWI proposed by JECFA; thus, the toxic metal content in school meals poses a negligible risk to children's health.

Microwave-induced combustion for further determination of potentially toxic elements in honey by ICP-MS.

Microwave-induced combustion (MIC) was proposed in this study for honey decomposition aiming for As, Cd, Hg, and Pb determination by inductively coupled plasma mass spectrometry (ICP-MS). Sample mass (up to 1.0 g), absorbing solution (0.5 to 14.4 mol L-1 HNO3, and H2O), heating program, and combustion aids were evaluated. The Eurachem guidelines were used for method validation. The proposed method enabled combustion of a high sample mass (0.8 g of honey, with 0.4 g of microcrystalline cellulose and 100 µL of 6 mol L-1 NH4NO3) using 6 mL of an absorbing solution consisting of 1 mol L-1 HNO3, which resulted in low residual carbon in solution (< 25 mg L-1). Honey samples from different geographical origins were analyzed. Results showed no significant difference in comparison to other two microwave decomposition methods, based on microwave-assisted wet digestion with single reaction chamber (MAWD-SRC) and microwave-assisted wet digestion (MAWD). Standard addition experiments resulted in recoveries higher than 98%. The limits of detection ranged from 1.10 (As) to 4.60 ng g-1 (Pb). In addition to using only diluted reagents and resulting in digests virtually free of interferences, the proposed method was faster (< 30 min) than most of those presented in the literature.

Trace elements in bean-to-bar chocolates from Brazil and Ecuador.

BACKGROUND: The high quality and unique flavor and aroma of bean-to-bar chocolates have resulted in an increase in the consumption of these products. Nevertheless, cocoa beans may present inorganic contaminants from environmental and anthropogenic sources which can contribute to contamination of the chocolates, despite the fewer processing steps and few ingredients used in bean-to-bar manufacturing process compared to the industrial one. Therefore, this study aimed to evaluate the content of trace elements (As, Cd, Co, Cu, Hg, Pb, Se) in bean-to-bar chocolates and traceable cocoa beans from Brazil and Ecuador. METHODS: Bean-to-bar chocolate samples were acquired in Brazil (n=65) and Ecuador (n=10), considering the main products available: white, milk, semisweet and dark chocolate. Cocoa samples from dedicated farms (n=23) were analyzed for trace elements and inorganic contaminants regulated by Brazil and European agencies. Samples were mineralized using acid digestion (nitric acid and hydrogen peroxide) in a closed microwave-assisted system. Quantification of trace elements was performed using Inductively coupled plasma mass spectroscopy (ICP-MS) and Inductively coupled plasma optical emission spectroscopy (ICP OES) in optimized conditions. The analytical control was performed with certified reference materials (ERM BD512 - Dark Chocolate, Tort-2 and Tort-3 - Lobster Hepatopancreas and SRM 1547 - Peach leaves) and recoveries ranged between 84% and 105% for all elements. RESULTS: The trace element levels in the bean-to-bar chocolates were (mg/kg): As (<0.022-0.023), Cd (<0.002-0.74), Cu (0.11-21.2), Co (<0.003-1.88), Hg (<0.010-<0.010), Pb (<0.007-0.22), and Se (<0.029-0.35). The exposure assessment from inorganic contaminants in chocolates revealed up to 93% of provisional tolerable monthly intake (PTMI) for Cd and 123% of tolerable upper intake level (UL) for Co for children. Inorganic contaminants were also analyzed in cocoa beans from dedicated farms and Cd and Pb levels were found above the thresholds established by Brazil health agency. CONCLUSION: The results observed for both bean-to-bar chocolates and raw materials (cocoa beans from dedicated farms) indicated a need for monitoring these trace elements.

Trace and rare earth elements in phytoplankton from the Tyrrhenian Sea (Italy).

Plankton plays a very crucial role in bioaccumulation and transfer of metals in the marine food web and represents a suitable bioindicator of the occurrence of trace and rare earth elements in the ecosystem. Trace elements and REEs were analyzed by ICP-MS in phytoplankton samples from the northwestern Mediterranean Sea. Metal concentrations in phytoplankton were found strongly influenced by seasons and depth of collection (- 30 m, - 50 m). Principal component analysis (PCA) has shown that Al, As, Cr, Cu, Ga, and Sn concentrations were related to summer and autumn in samples collected at 30 m depth, while Fe, Mn, Ni, V, and Zn levels related strongly with summer and spring at 50 m depth. Fe, Al, and Zn were the most represented elements in all samples (mean values respectively in the ranges 4.2-8.2, 9.6-13, and 1.0-4.4 mg kg-1) according to their widespread presence in the environment and in the earth crust. Principal component analysis (PCA) performed on REEs showed that mostly all lanthanides' concentrations strongly correlate with summer and autumn seasons (- 30 m depth); the highest ∑REE concentration (75 µg kg-1) was found in winter. Phytoplankton REE normalized profile was comparable to those of other marine biota collected in the same area according to the suitability of lanthanides as geological tracers.

Biomonitoring of arsenic, lead, manganese and mercury in hair from a presumably exposed Uruguayan child population.

Aim: To perform an exposure assessment of arsenic, manganese, mercury and lead levels in hair samples from children from poor neighborhoods. Materials & methods: A total of 38 Caucasian children were recruited with the consent of their parents or tutors. Determinations were performed by atomic absorption spectrometry. Results & conclusion: Results were 0.045-0.12 µg/g-1 (arsenic), 0.56-2.05 µg/g-1 (manganese) and 0.34-27.8 µg/g-1 (lead). Lead results did not correlate with those previously reported in blood from the same individuals, suggesting that hair is not useful for exposure assessment of this contaminant. Mercury was determined for the first time in Uruguayan children showing levels <0.083 µg/g-1. Results revealed low-to-moderate metal exposure, except for some high lead findings.

Inorganic Contaminants in Plant-Based Yogurts Commercialized in Brazil.

This study aimed to evaluate the content of 11 inorganic elements (Al, Cr, Co, Ni, As, Mo, Cd, Sb, Ba, Hg, and Pb) in commercial plant-based and animal-based yogurts for comparison purposes. The samples were mineralized using a simple and fast ultrasound-assisted acid digestion method at 80 °C for 35 min, and the determination of inorganic elements was performed by ICP-MS. The method was validated according to the INMETRO guide, obtaining recoveries from 80 to 110%, precision from 6 to 15%, and a limit of quantification (LOQ) ranging from 200 µg/kg (Al) to 4 µg/kg (other elements). The element concentrations in the plant-based yogurts were Al(

Characterization of childhood exposure to environmental contaminants using stool in a semi-urban middle-class cohort from eastern Canada.

Children are exposed to various environmental organic and inorganic contaminants with effects on health outcomes still largely unknown. Many matrices (e.g., blood, urine, nail, hair) have been used to characterize exposure to organic and inorganic contaminants. The sampling of feces presents several advantages; it is non-invasive and provides a direct evaluation of the gut microbiome exposure to contaminants. The gut microbiome is a key factor in neurological development through the brain-gut axis. Its composition and disturbances can affect the neurodevelopment of children. Characterization of children exposure to contaminants is often performed on vulnerable populations (e.g., from developing countries, low-income neighborhoods, and large urban centers). Data on the exposure of children from middle-class, semi-urban, and mid-size populations to contaminants is scarce despite representing a significant fraction of the population in North America. In this study, 73 organics compounds from different chemical classes and 22 elements were analyzed in 6 years old (n = 84) and 10 years old (n = 119) children's feces from a middle-class, semi-urban, mid-size population cohort from Eastern Canada. Results show that 67 out of 73 targeted organics compounds and all elements were at least detected in one child's feces. Only caffeine (97% & 80%) and acetaminophen (28% & 48%) were detected in more than 25% of the children's feces, whereas all elements besides titanium were detected in more than 50% of the children.

Preliminary Data on Essential and Non-essential Element Occurrence in Processed Animal Proteins from Insects.

Insects represent a valuable and environmentally friendly protein alternative in food and feed. The Farm to Fork strategy encouraged the reintroduction of animal by-products in feed production to optimise recycling and to valorise under-used resources. In order to grant safe and valuable feed products, this study investigated the black soldier fly (BSF) (Hermetia illucens) chemical risk. Samples collected in different steps of production (8 samples of substrate for culturing, 7 samples of larvae, 15 samples of protein meal, 18 samples of spent substrate) were analysed for microessential elements (chromium, copper, iron, nickel, selenium and zinc) and inorganic contaminants (aluminium, arsenic, cadmium, lead, tin and vanadium) by Inductively Coupled Plasma Mass Spectrometer (ICP-MS). Microessential elements were found in the following order: Fe > Zn > Cu > Ni > Se > Cr (mg kg-1). Non-essential element concentrations were found lower than the set limits according to the European Union Regulations. The growing demand for alternative protein sources for feed production could be partially compensated by black soldier fly (BSF) (Hermetia illucens) meal, as it appears a good source for high-quality proteins and microessential elements which play a pivotal role in animal growth. In the foreseeable future the current legislation and the official monitoring plans may be implemented and broaden, to focus and assess limits for upcoming matrices, and to ensure feed and food safety.

Microbial endophytes and compost improve plant growth in two contrasting types of hard rock mining waste.

The re-vegetation of mining wastes with native plants is a comparatively low-cost solution for mine reclamation. However, re-vegetation fails when extreme pH values, low organic matter, or high concentrations of phytotoxic elements inhibit plant establishment and growth. Our aim was to determine whether the combined addition of municipal waste compost and diazotrophic endophytes (i.e., microorganisms that fix atmospheric N2 and live within plants) could improve plant growth, organic matter accumulation, and phytostabilization of trace element contaminants in two types of hard rock mine waste. We grew a widespread native perennial grass, Bouteloua curtipendula, for one month in alkaline waste rock (porphyry copper mine) and tailings (Ag-Pb-Au mine, amended with dolomite) sourced from southeastern Arizona, United States. B. curtipendula tolerated elevated concentrations of multiple phytotoxic trace elements in the tailings (Mn, Pb, Zn), stabilizing them in roots without foliar translocation. Adding compost and endophyte seed coats improved plant growth, microbial biomass, and organic matter accumulation despite stark differences in the geochemical and physical characteristics of the mining wastes. The widespread grass B. curtipendula is a potential candidate for re-vegetating mine wastes when seeded with soil additives to increase pH and with microbial and organic amendments to increase plant growth.

This study quantifies improvements to plant growth, soil fertility, and trace element stabilization with a municipal waste compost topdressing and diazotrophic endophyte seed coating in two common hard rock mining wastes of the western United States. It establishes that a widespread perennial grass, Bouteloua curtipendula, can grow despite high concentrations of phytotoxic trace elements and minimal soil nutrients, and stabilizes trace elements on or in its roots, making it a suitable option for re-vegetation or phytostabilization of hard rock mining wastes.

Advanced Polymeric Nanocomposites for Water Treatment Applications: A Holistic Perspective.

Water pollution remains one of the greatest challenges in the modern era, and water treatment strategies have continually been improved to meet the increasing demand for safe water. In the last few decades, tremendous research has been carried out toward developing selective and efficient polymeric adsorbents and membranes. However, developing non-toxic, biocompatible, cost-effective, and efficient polymeric nanocomposites is still being explored. In polymer nanocomposites, nanofillers and/or nanoparticles are dispersed in polymeric matrices such as dendrimer, cellulose, resins, etc., to improve their mechanical, thermophysical, and physicochemical properties. Several techniques can be used to develop polymer nanocomposites, and the most prevalent methods include mixing, melt-mixing, in-situ polymerization, electrospinning, and selective laser sintering techniques. Emerging technologies for polymer nanocomposite development include selective laser sintering and microwave-assisted techniques, proffering solutions to aggregation challenges and other morphological defects. Available and emerging techniques aim to produce efficient, durable, and cost-effective polymer nanocomposites with uniform dispersion and minimal defects. Polymer nanocomposites are utilized as filtering membranes and adsorbents to remove chemical contaminants from aqueous media. This study covers the synthesis and usage of various polymeric nanocomposites in water treatment, as well as the major criteria that influence their performance, and highlights challenges and considerations for future research.

The potential of saltmarsh halophytes for phytoremediation of metals and persistent organic pollutants: An Australian perspective.

Persistent organic and inorganic pollutants are among the most concerning pollutants in Australian estuaries due to their persistent, ubiquitous, and potentially toxic nature. Traditional methods of soil remediation often fall short of practical implementation due to high monetary investment, environmental disturbance, and potential for re-contamination. Phytoremediation is gaining traction as an alternative, or synergistic mechanism of contaminated soil remediation. Phytoremediation utilises plants and associated rhizospheric microorganisms to stabilise, degrade, transform, or remove xenobiotics from contaminated mediums. Due to their apparent cross-tolerance to salt, metals, and organic contaminants, halophytes have shown promise as phytoremediation species. This review examines the potential of 93 species of Australian saltmarsh halophytes for xenobiotic phytoremediation. Considerations for the practical application of phytoremediation in Australia are discussed, including mechanisms of enhancement, and methods of harvesting and disposal. Knowledge gaps for the implementation of phytoremediation in Australian saline environments are identified, and areas for future research are suggested.

Processed animal proteins (PAPs) in animal nutrition: Assessment of the chemical risk of essential and non-essential elements.

BACKGROUND: Processed animal products (PAPs) could be a great alternative to common protein supplements and represent a good example of recycling and valorization of by-products. Due to the reintroduction of certain types of PAPs in feed, a deeper knowledge of these heterogeneous matrices is needed. Thus, the aim of this study is to evaluate the levels of essential elements and inorganic contaminants in 55 PAPs considered as potential alternatives to common protein supplements. METHODS: PAPs samples were analysed for essential (cobalt, nickel, chromium, copper, zinc, iron and manganese) and non-essential elements (arsenic, cadmium, lead and mercury) by Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Graphite Furnace Atomization Atomic Absorption Spectrometer (GF-AAS) and dual cell Direct Mercury Analyzer spectrometer (DMA-80). RESULTS: Essential elements were found with the following decreasing order iron>zinc>copper>manganese>chromium>nickel>cobalt (mg kg-1). Only one sample was found non-compliant to lead concentration according to the European Union Regulation while negligible values of others non-essential elements were found. CONCLUSIONS: This study suggests that PAPs could be a useful supplement for animal diet due to their natural content of essential elements. A careful monitoring of chemical elements should be required and eventually guidelines have to be drafted for a correct use of PAPs to ensure a safe and sustainable feed production.

Household and community systems for groundwater remediation in Bihar, India: Arsenic and inorganic contaminant removal, controls and implications for remediation selection.

The presence of arsenic (As) and other inorganic contaminants in groundwater is a key public health issue in India and many other parts of the world. Whilst a broad range of remediation technologies exist, performance can be highly variable, and appropriate selection and management of remediation approaches remains challenging. Here, we have identified and tested the performance of a range of small-scale remediation technologies (e.g. sand filters, multi-stage filtration and reverse osmosis (RO)-based systems; n = 38) which have been implemented in Bihar, India. We have undertaken spot-assessments of system performance under typical operating conditions in household and non-household (e.g. community, hospital, hostel/hotel) settings. The removal of As and other inorganic contaminants varied widely (ranging from ~0-100%), with some solutes generally more challenging to remove than others. We have evaluated the relative importance of technology type (e.g. RO-based versus non-RO systems), implementation setting (e.g. household versus non-household) and source water geochemistry (particularly concentrations and ratios of As, Fe, P, Si and Ca), as potential controls on remediation effectiveness. Source water composition, particularly the ratio ([Fe] - 1.8[P])/[As], is a statistically significant control on As removal (p < 0.01), with higher ratios associated with higher removal, regardless of technology type (under the site-specific conditions observed). This ratio provides a theoretical input which could be used to identify the extent to which natural groundwater composition may be geochemically compatible with higher levels of As removal. In Bihar, we illustrate how this ratio could be used to identify spatial patterns in theoretical geochemical compatibility for As removal, and to identify where additional Fe may theoretically facilitate improved remediation. This geochemical approach could be used to inform optimal selection of groundwater remediation approaches, when considered alongside other important considerations (e.g. technical, managerial and socio-economic) known to impact the effective implementation and sustainability of successful groundwater remediation approaches.

Use of Air-Classification Technology to Manage Mycotoxin and Arsenic Contaminations in Durum Wheat-Derived Products.

Mycotoxins are the most common natural contaminants and include different types of organic compounds, such as deoxynivalenol (DON) and T-2 and HT-2 toxins. The major toxic inorganic elements include those commonly known as heavy metals, such as cadmium, nickel, and lead, and other minerals such as arsenic. In this study, micronisation and air classification technologies were applied to durum wheat (Triticum turgidum ssp. durum L.) samples to mitigate inorganic (arsenic) and organic contaminants in unrefined milling fractions and final products (pasta). The results showed the suitability of milling plants, providing less refined milling products for lowering amounts of mycotoxins (DON and the sum of T-2 and HT-2 toxins) and toxic inorganic elements (As, Cd, Ni, and Pb). The results showed an As content (in end products) similar to that obtained using semolina as raw material. In samples showing high organic contamination, the contamination rate detected in the more bran-enriched fractions ranged from 74% to 150% (DON) and from 119% to 151% (sum of T2 and HT-2 toxins) as compared to the micronised samples. Therefore, this technology may be useful for manufacturing unrefined products with reduced levels of organic and inorganic contaminants, minimising the health risk to consumers.

A critical review on the application of biochar in environmental pollution remediation: Role of persistent free radicals (PFRs).

Biochar as an emerging carbonaceous material has exhibited a great potential in environmental application for its perfect adsorption ability. However, there are abundant persistent free radicals (PFRs) in biochar, so the direct and indirect PFRs-mediated removal of organic and inorganic contaminants by biochar was widely reported. In order to comprehend deeply the formation of PFRs in biochar and their interactions with contaminants, this paper reviews the formation mechanisms of PFRs in biochar and the PFRs-mediated environmental applications of biochar in recent years. Finally, future challenges in this field are also proposed. This review provides a more comprehensive understanding on the emerging applications of biochar from the viewpoint of the catalytic role of PFRs.

Baseline on rare earth elements in the marine sediments of a Mediterranean commercial port as environmental tracers and their relationships with inorganic contaminants.

The Port of Genoa (north-western Mediterranean Sea) receives sediments from two different catchment areas (Bisagno and Polcevera torrents). The aim of the work is to evaluate if Rare Earth Elements (REEs) could be used to identify the two sedimentary inputs and to unravel the origin of inorganic contaminants in an anthropised basin. REE results constitute a baseline for this port. The main REE-bearing minerals are phosphates and zircon. As, Cd, Hg, Pb, and Sn concentrate in the sediments closer to the Bisagno Torrent mouth, and the correlation with Ca and Light-REEs suggests their plausible geological origin. Co, Mn, and Ni maxima lie in the sediments closer to the Polcevera Torrent. Their correlation with Middle-REEs and Mg suggest that ophiolitic rocks could explain their presence. Cr, Cu, V, and Zn do not show a clear correlation with REEs, and their origin probably is a combination of natural and anthropogenic sources.

Multielemental Analysis of Bee Pollen, Propolis, and Royal Jelly Collected in West-Central Poland.

Beehive products possess nutritional value and health-promoting properties and are recommended as so-called "superfoods". However, because of their natural origin, they may contain relevant elemental contaminants. Therefore, to assess the quality of bee products, we examined concentrations of a broad range of 24 selected elements in propolis, bee pollen, and royal jelly. The quantitative analyses were performed with inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) techniques. The results of our research indicate that bee products contain essential macronutrients (i.e., K, P, and S) and micronutrients (i.e., Zn and Fe) in concentrations depending on the products' type. However, the presence of toxic heavy metals makes it necessary to test the quality of bee products before using them as dietary supplements. Bearing in mind that bee products are highly heterogenous and, depending on the environmental factors, differ in their elemental content, it is necessary to develop standards regulating the acceptable levels of inorganic pollutants. Furthermore, since bees and their products are considered to be an effective biomonitoring tool, our results may reflect the environment's condition in west-central Poland, affecting the health and well-being of both humans and bees.

Ecotoxicity profile of heavily contaminated surface water of two rivers in Tunisia.

Persistent organic and inorganic contaminants generated by industrial effluent wastes poses a threat to the maintenance of aquatic ecosystems and public health. The Khniss and Hamdoun rivers, located in the central-east of Tunisia, receive regularly domestic and textile wastewater load. The present study aimed to survey the water quality of these rivers using physicochemical, analytical and toxicological approaches. In the physicochemical analysis, the recorded levels of COD and TSS in both samples exceed the Tunisian standards. Using the analytical approach, several metals and some textile dyes were detected. Indeed, 17 metals were detected in both samples in varying concentrations, which do not exceed the Tunisian standards. The sources of metals pollution can be of natural and anthropogenic origin. Three textile disperse dyes were detected with high levels compared to other studies: the disperse orange 37 was detected in the Khniss river with a concentration of 6.438 µg/L and the disperse red 1 and the disperse yellow 3 were detected in the Hamdoun river with concentrations of 3.873 µg/L and 1895 µg/L, respectively. Textile activities were the major sources of disperse dyes. For both samples, acute and chronic ecotoxicity was observed in all the studied organisms, however, no genotoxic activity was detected. The presence of metals and textile disperse dyes could be associated with the ecotoxicological effects observed in the river waters, in particular due to the industrial activity, a fact that could deteriorate the ecosystem and therefore threaten the human health of the population living in the study areas. Combining chemical and biological approaches, allowed the detection of water ecotoxicity in testing organisms and the identification of possible contributors to the toxicity observed in these multi-stressed water reservoirs.

Bioaccessibility of potentially toxic metals in soil, sediments and tailings from a north Africa phosphate-mining area: Insight into human health risk assessment.

The risk assessment of phosphate mining/processing industrial activities on the environment and human health is crucial to properly manage and minimize the risks over time. In this work, we studied the inhalation and dermal bioaccessibility of potentially toxic metals (PTM) in different particle-size fractions of urban soil, sediments and tailings from Gafsa-Metlaoui phosphate mining area, to assess afterwards the non-carcinogenic (NCR) and carcinogenic (CR) risks for the health of local citizens and workers constantly exposed to airborne particulate matter (PM) originating from these sources of contamination. Samples were separated in particle-size fractions by centrifugation and consecutive cycles of sedimentation and decanting. The pseudo-total concentrations and bioaccessible fractions of PTM were extracted by aqua regia and in vitro bioaccessibility tests, respectively. Both sediments and tailings showed higher-than-background concentrations of PTM (mainly Cd, Zn and Cr), with a tendency to accumulate these metals in fine particles (<10 µm). In urban soil, only Cd was above the background concentration. The bioaccessibility of PTM via inhalation was significantly higher in artificial lysosomal fluid (ALF) than in simulated epithelial lung fluid (SELF): basically, Cd was the most bioaccessible metal (relative bioaccessibility up to 80%), followed by the medium-to-high bioaccessible Zn (47%), Pb (46%) and Cu (39%), and the least bioaccessible Cr (16%). In synthetic skin surface liquid (NIHS 96-10), only Cd was bioaccessible at worrying extent (20-44%). On the basis of US.EPA risk assessment, the exposure to PTM bioaccessible fractions or pseudo-total concentrations would not cause serious NCR and CR risks for human health. Significant health risks (Hazard Index >1 and CR > 10-4), especially for children, can occur if ingestion route is also considered. The findings underline the need for adequate protection of contaminated soil, sediments and mine tailings laying nearby urban agglomerates, to reduce the health risks for inhabitants and workers of Gafsa-Metlaoui mining area.

Lizards as model organisms to evaluate environmental contamination and biomonitoring.

Environmental contamination is reaching ever higher levels and affecting several animal populations, including humans. In this context, studies are being developed to monitor and evaluate this environmental problem using bioindicators organisms, in addition to testing the toxicity of contaminants in the laboratory. In this perspective, reptiles are ideal animals for these types of studies, considering that they are ectothermic and have a slower metabolism directly influencing their recovery power, and therefore, they are more sensitive to xenobiotic effects. Among reptiles, lizards are animals that adapt to various environmental conditions, even being found in areas with arid characteristics. Therefore, a literature review was conducted in this study regarding the use of lizards as models for ecotoxicological studies, including biomonitoring, carried out in the last 10 years, with the aim of evaluating them as bioindicators in Brazilian semi-arid region. Studies were found involving ten lizard families, among which the most investigated was Lacertidae. The studies were classified into two categories: organic contaminants (pesticides, petroleum by-products, and explosives) and inorganic contaminants (metals such as zinc, lead and aluminum, and radionuclides). Contaminants directly contributed to DNA damage and to increasing the frequency of micronuclei in exposed animals, histopathological effects, and oxidative stress. The performed analysis highlights the usefulness of lizards as environmental biomonitors. However, the response profile is dependent on the exposure level and route, in addition to the environmental scenario analyzed. Therefore, future studies aimed at evaluating environmental contaminants are required under exposure conditions more related to the environmental reality to be studied.