Amino-modified IONPs potentiates ferroptotic cell death due to the release of Fe ion in the lysosome.

Iron oxide nanoparticles (IONPs) have wide applications in the biomedical field due to their outstanding physical and chemical properties. However, the potential adverse effects and related mechanisms of IONPs in human organs, especially the lung, are still largely ignored. In this study, we found that group-modified IONPs (carboxylated, aminated and silica coated) induce slight lung cell damage (in terms of the cell cycle, reactive oxygen species (ROS) production, cell membrane integrity and DNA damage) at a sublethal dosage. However, aminated IONPs could release more iron ions in the lysosome than the other two types of IONPs, but the abnormally elevated iron ion concentration did not induce ferroptosis. Intriguingly, amino-modified IONPs aggravated the accumulation of intracellular peroxides induced by the ferroptosis activator RSL3 and thus caused ferroptosis in vitro, and the coadministration of amino-modified IONPs and RSL3 induced more severe lung injury in vivo. Therefore, our data revealed that the surface functionalization of IONPs plays an important role in determining their potential pulmonary toxicity, as surface modification influences their degradation behavior. These results provide guidance for the design of future IONPs and the corresponding safety evaluations and predictions.

Hydrophobic iron oxide nanoparticles: Controlled synthesis and phase transfer via flash nanoprecipitation.

Iron oxide nanoparticles (IONPs) synthesized via thermal decomposition find diverse applications in biomedicine owing to precise control of their physico-chemical properties. However, use in such applications requires phase transfer from organic solvent to water, which remains a bottleneck. Through the thermal decomposition of iron oleate (FeOl), we systematically investigate the impact of synthesis conditions such as oleic acid (OA) amount, temperature increase rate, dwell time, and solvent on the size, magnetic saturation, and crystallinity of IONPs. Solvent choice significantly influences these properties, manipulating which, synthesis of monodisperse IONPs within a tunable size range (10-30 nm) and magnetic properties (75 to 42 Am2Kg-1) is obtained. To enable phase transfer of IONPs, we employ flash nanoprecipitation (FNP) for the first time as a method for scalable and precise size control, demonstrating its potential over conventional methods. Poly(lactic-co-glycolic acid) (PLGA)-coated IONPs with hydrodynamic diameter (Hd) in the range of 250 nm, high colloidal stability and high IONPs loadings up to 43% were obtained, such physicochemical properties being tuned exclusively by the size and hydrophobicity of starting IONPs. They showed no discernible cytotoxicity in human dermal fibroblasts, highlighting the applicability of FNP as a novel method for the functionalization of hydrophobic IONPs for biomedicine.

Application of Response Surface Methodology to Design and Optimize Purification of Acetone or Aqueous Acetone Extracts of Hop Cones (Humulus lupulus L.) Using Superparamagnetic Iron Oxide Nanoparticles for Xanthohumol Isolation.

Iron oxide nanoparticles (IONPs) are an ideal sorbent for magnetic dispersion extraction due to their superparamagnetic properties and developed and active surface. This work aims to use IONPs, obtained by chemical co-precipitation, to purify 100% acetone and 50% acetone extracts from hop cones (Humulus lupulus L.) obtained by ultrasonic-assisted solvent extraction. The extracts were purified from bitter acids (i.e., humulones, lupulones) to isolate xanthohumol. The sorption conditions were optimized depending on the composition of the extraction mixture, specifically the mass of IONPs and the time needed to achieve effective sorption using response surface methodology (RSM). An analysis of variance (ANOVA) was performed to assess the adequacy of the developed model, and a good agreement was found between the experimental data and the proposed model. The polynomial equation describing the model is highly significant (p < 0.05), with a precision of Adeq (above 4). This indicates the usefulness of the polynomial regression model for prediction in experimental design. The final products of the purification for 100% acetone extracts and 50% acetone contain 40.58 ± 2.84 µg mL-1 and 57.64 ± 0.83 µg mL-1 of xanthohumol, respectively. The use of 50% acetone extract provides more favorable conditions due to the smaller amount of nanoparticles required for extract purification and a higher recovery of xanthohumol. The development of a reliable multivariate model allowed for the optimization of the extract purification process, resulting in high-purity xanthohumol from natural sources.

Green Synthesis of Magnetic Fe2O3 Nanoparticle with Chenopodium glaucum L. as Recyclable Heterogeneous Catalyst for One-Pot Reactions and Heavy Metal Adsorption.

The growth of the environment depends upon developing greener and ecological methods for managing pollutants and contamination from industrial wastewater, which causes significant effects on human health. The removal of these pollutants from wastewater using nanomaterials covers an ecological method that is free from expensive and secondary pollution. In this report, we developed magnetic iron nanoparticles from Chenopodium glaucum (CG), which showed excellent adsorption capacity at pH 5 for selective Hg2+ and Pb2+ metal ions among various heavy metal ions, with maximum adsorption capacities of 96.9 and 94.1%, respectively. These metals' adsorption process conforms to the Langmuir model, which suggests that monolayer adsorption transpires on CG-Fe2O3 nanoparticles. CG-Fe2O3 nanoparticles also act as an efficient and recyclable heterogeneous catalyst for one-pot synthesis of xanthene derivatives, yielding products with high yields (up to 97%) and excellent purity (crystalline form) within a short timeframe (6 min) using microwave irradiations (at 120 W).

Biosynthesis of Iron Oxide Nanoparticles by Marine Streptomyces sp. SMGL39 with Antibiofilm Activity: In Vitro and In Silico Study.

One of the major global health threats in the present era is antibiotic resistance. Biosynthesized iron oxide nanoparticles (FeNPs) can combat microbial infections and can be synthesized without harmful chemicals. In the present investigation, 16S rRNA gene sequencing was used to discover Streptomyces sp. SMGL39, an actinomycete isolate utilized to reduce ferrous sulfate heptahydrate (FeSO4.7H2O) to biosynthesize FeNPs, which were then characterized using UV-Vis, XRD, FTIR, and TEM analyses. Furthermore, in our current study, the biosynthesized FeNPs were tested for antimicrobial and antibiofilm characteristics against different Gram-negative, Gram-positive, and fungal strains. Additionally, our work examines the biosynthesized FeNPs' molecular docking and binding affinity to key enzymes, which contributed to bacterial infection cooperation via quorum sensing (QS) processes. A bright yellow to dark brown color shift indicated the production of FeNPs, which have polydispersed forms with particle sizes ranging from 80 to 180 nm and UV absorbance ranging from 220 to 280 nm. Biosynthesized FeNPs from actinobacteria significantly reduced the microbial growth of Fusarium oxysporum and L. monocytogenes, while they showed weak antimicrobial activity against P. aeruginosa and no activity against E. coli, MRSA, or Aspergillus niger. On the other hand, biosynthesized FeNPs showed strong antibiofilm activity against P. aeruginosa while showing mild and weak activity against B. subtilis and E. coli, respectively. The collaboration of biosynthesized FeNPs and key enzymes for bacterial infection exhibits hydrophobic and/or hydrogen bonding, according to this research. These results show that actinobacteria-biosynthesized FeNPs prevent biofilm development in bacteria.

Nanoremediation of tilapia fish culture using iron oxide nanoparticles biosynthesized by Bacillus subtilis and immobilized in a free-floating macroporous cryogel.

BACKGROUND AND AIM: Contamination from increased anthropogenic activities poses a threat to human health as well as the ecosystem. To develop a nanotechnological approach to improve aqua fisheries, we synthesized magnetic hematite nanoparticle-based gel and evaluated its efficacy in a cadmium-polluted closed system to decontaminate water and improve tilapia fish health. METHODS: Green iron oxide nanoparticles were biosynthesized by the metabolite of bacillus subtilis and incorporated into polyvinyl alcohol to construct a hydrogel by cryogelation. KEY FINDINGS: The cryogel had interconnected macropores with diameters widely ranging between 20 and 200 µm and could be free-floating in water. When applied in cadmium-polluted tilapia culture, this nanogel reduced turbidity and ammonia in the aquarium, adsorbed cadmium from the water with a larger quantity on the gel's outer surface than in its center., and reduced cadmium concentration in tilapia's liver, gills, and muscles. Application of this nano-based cryogel reduced the toxic effects of cadmium on tilapia fish. It maintained hepatic and renal cell nuclear integrity as determined by comet assay. This nano-treatment also reversed the cadmium-induced elevations of plasma lipids, glucose, stress marker cortisol, the hepatic enzymes AST and ALT, and the kidney function marker urea, and improved the lymphocytopenia and other hematological functions in tilapia fish intoxicated by cadmium.

Engineering Protein-Nanoparticle Hybrids as Targeted Contrast Agents.

Iron oxide nanoparticles (IONPs) have shown great promise in biomedical applications, particularly as MRI contrast agents due to their magnetic properties and biocompatibility. Although several IONPs have been approved by regulatory agencies as MRI contrast agents, their primary application as negative contrast agents limits their usage. Additionally, there is an emerging need for the development of molecular contrast agents that can specifically target biomarkers, enabling more accurate and sensitive diagnostics. To address these challenges, we exploited the engineerability of proteins to stabilize IONPs with tailored magnetic properties, creating protein-stabilized iron oxide nanoparticles (Prot-IONPs) and leveraged the chemical diversity of proteins to functionalize Prot-IONPs with targeting moieties. As a proof-of-concept, we used alendronate (Ald) to target atherosclerotic plaques in the aorta. Simple protein functionalization allowed targeting while maintaining the stability and relaxation properties of the Prot-IONPs. Prot-IONPs-Ald successfully enabled positive contrast imaging of atherosclerotic plaques in vivo in an atherosclerotic mouse model (ApoE-/- mice on a high-fat diet). This study demonstrates the potential of engineering protein-nanoparticle hybrids as versatile platforms for developing targeted in vivo MRI contrast agents.

Aluminum phthalocyanine tetrasulfonate conjugated to surface-modified Iron oxide nanoparticles as a magnetic targeting platform for photodynamic therapy of Ehrlich tumor-bearing mice.

BACKGROUND: Photodynamic therapy (PDT) is a targeted treatment option for cancers that are non-responding to ordinary anticancer therapies. It involves activating a photosensitizer with a light source of a specific wavelength to destroy targeted cells and their surrounding vasculature. Aluminum phthalocyanine tetra sulfonate (AlPcS4) has gained attention as a second-generation photosensitizer for its strong absorption in the red-light region. AlPcS4 can be conjugated to magnetic iron oxide nanoparticles (IONs) to provide targeted drug delivery to the tumor cells while reducing its undesired effect on healthy tissues in other body parts. METHODS: Magnetic glutamine functionalized iron oxide nanocomposites loaded with AlPcS4 (IONs-NH2-AlPcS4) were synthesized via the co-precipitation method. The conjugate (IONs-NH2-AlPcS4) was characterized by TEM, Zeta potential, DLS, FTIR, and UV-VIS absorption spectroscopy. Furthermore, its photodynamic activity was investigated using albino mice with induced Ehrlich solid tumors. RESULTS: AlPcS4 was successfully conjugated to IONs-NH2 with a high loading efficiency of 54±2%. The synthesized conjugate exhibited a spherical shape, with 7 ± 2 nm particle size. The In vivo experiment revealed that the albino mice with induced Ehrlich solid tumor that were treated by combined PDT and magnetic targeting conjugate exhibited significant tumor regression and notably higher levels of necrotic tissue compared to the animals in other groups. CONCLUSION: PDT mediated by magnetic targeting significantly inhibited tumor growth with minimal adverse effects, indicating its great potential as a promising strategy for solid cancer treatment.

Application of H2N-Fe3O4 Nanoparticles for Prostate Cancer Magnetic Resonance Imaging in an Animal Model.

This paper presents the efficacy of a contrast agent based on H2N-Fe3O4 nanoparticles for the detection of prostate cancer in an animal model using a preclinical 9.4 T MRI system. The relaxivities r1 and r2 of the nanoparticles were 6.31 mM-1s-1 and 8.33 mM-1s-1, respectively. Nanoparticles injected in a concentration of 2 mg Fe/mL decreased the tumor-relative T1 relaxation across all animals from 100 to 76 ± 26, 85 ± 27, 89 ± 20, and 97 ± 16 12 min 1 h, 2 h, and 24 h post injection, respectively. The corresponding T1 decrease in muscle tissues was 90 ± 20, 94 ± 23, 99 ± 12, and 99 ± 14. The relative T2 changes in the tumor were 82 ± 17, 89 ± 19, 97 ± 14, and 99 ± 8 12 min, 1 h, 2 h, and 24 h post injection, respectively, while, for muscle tissues, these values were 95 ± 11, 95 ± 8, 97 ± 6, and 95 ± 10 at the corresponding time points. The differences in the relative T1 and T2 were only significant 12 min after injection (p < 0.05), although a decrease was visible at each time point, but it was statistically insignificant (p > 0.05). The results showed the potential application of H2N-Fe3O4 nanoparticles as contrast agents for enhanced prostate cancer MRI.

Application of magnetic nanoparticles in adoptive cell therapy of cancer; training, guiding and imaging cells.

Adoptive cell therapy (ACT) is on the horizon as a thrilling therapeutic plan for cancer. However, widespread application of ACT is often restricted by several challenges, including complexity of priming tumor-specific T cells and poor trafficking in solid tumors. The convergence of nanotechnology and cancer immunotherapy is coming of age and could address the limitations of ACT. Recent studies have provided evidence on the application of magnetic nanoparticles (MNPs) to generate smart immune cells and to bypass problems associated with conventional ACT. Herein, we review current progress in the application of MNPs to improve preparing, guiding and tracking immune cells in cancer ACT. Besides, we comment on the challenges ahead and strategies to optimize MNPs for clinical settings.

[Box: see text].

Poly(ε-Caprolactone)-Based Composites Modified With Polymer-Grafted Magnetic Nanoparticles and L-Ascorbic Acid for Bone Tissue Engineering.

The aim of this study was to develop multifunctional magnetic poly(ε-caprolactone) (PCL) mats with antibacterial properties for bone tissue engineering and osteosarcoma prevention. To provide good dispersion of magnetic iron oxide nanoparticles (IONs), they were first grafted with PCL using a novel three-step approach. Then, a series of PCL-based mats containing a fixed amount of ION@PCL particles and an increasing content of ascorbic acid (AA) was prepared by electrospinning. AA is known for increasing osteoblast activity and suppressing osteosarcoma cells. Composites were characterized in terms of morphology, mechanical properties, hydrolytic stability, antibacterial performance, and biocompatibility. AA affected both the fiber diameter and the mechanical properties of the nanocomposites. All produced mats were nontoxic to rat bone marrow-derived mesenchymal cells; however, a composite with 5 wt.% of AA suppressed the initial proliferation of SAOS-2 osteoblast-like cells. Moreover, AA improved antibacterial properties against Staphylococcus aureus and Escherichia coli compared to PCL. Overall, these magnetic composites, reported for the very first time, can be used as scaffolds for both tissue regeneration and osteosarcoma prevention.

Inflammation related to inhalation of nano and micron sized iron oxides: a systematic review.

Inhalation exposure to iron oxide occurs in many workplaces and respirable aerosols occur during thermal processes (e.g. welding, casting) or during abrasion of iron and steel products (e.g. cutting, grinding, machining, polishing, sanding) or during handling of iron oxide pigments. There is limited evidence of adverse effects in humans specifically linked to inhalation of iron oxides. This contrasts to oxides of other metals used to alloy or for coating of steel and iron of which several have been classified as being hazardous by international and national agencies. Such metal oxides are often present in the air at workplaces. In general, iron oxides might therefore be regarded as low-toxicity, low-solubility (LTLS) particles, and are often considered to be nontoxic even if very high and prolonged inhalation exposures might result in diseases. In animal studies, such exposures lead to cancer, fibrosis and other diseases. Our hypothesis was that pulmonary-workplace exposure during manufacture and handling of SPION preparations might be harmful. We therefore conducted a systematic review of the relevant literature to understand how iron oxides deposited in the lung are related to acute and subchronic pulmonary inflammation. We included one human and several in vivo animal studies published up to February 2023. We found 25 relevant studies that were useful for deriving occupational exposure limits (OEL) for iron oxides based on an inflammatory reaction. Our review of the scientific literature indicates that lowering of health-based occupational exposure limits might be considered.

Mentha spicata Mediated Formulation of Iron Oxide Nanoparticles Exhibit Superior Antimicrobial, Antioxidant, and Photodegradation Propensity Compared to Chemically Formulated Counterparts.

INTRODUCTION: Iron oxide nanoparticles demonstrate tremendous potential in preserving the ecological balance of the environment since they act as antimicrobial agents and efficient photocatalysts. However, environmental sustainability has challenged the synthesis protocols of nanomaterials. METHOD: This study compares the green synthesis method with the scalable chemical synthesis method. In this work, Iron oxide nanoparticles were fabricated via the green chemistry technique utilizing the leaf extract of Mentha spicata (M-IONP) and also via the chemical co-precipitation method (C-IONP). The synthesized IONPs were analyzed by different characterization methods such as XRD, FTIR, SEM analysis, ZETA potential measurements, and DLS spectroscopy analysis. RESULTS: The biosynthesized and chemically synthesized IONPs were analyzed for their mechanistic action against different applications like antimicrobial, antioxidant, and degradation of harmful dyes. Interestingly, the biosynthesized IONPs (M-IONP) exhibited more effective antimicrobial efficacy towards Gram-positive and Gram-negative organisms than chemically synthesized IONPs. CONCLUSION: The green synthesized M-IONP also showed significant antioxidant propensity similar to that of the standards taken. Additionally, green-synthesized M-IONP exhibited enhanced degradation efficacies against Methylene blue, chromium, and sulphamethoxazole in comparison to chemically synthesized IONP.

Design and evaluation of magnetic-targeted bilosomal gel for rheumatoid arthritis: flurbiprofen delivery using superparamagnetic iron oxide nanoparticles.

Introduction: The study aimed to systematically enhance the fabrication process of flurbiprofen-loaded bilosomes (FSB) using Quality by Design (QbD) principles and Design of Experiments (DOE). The objective was to develop an optimized formulation with improved entrapment efficiency and targeted drug delivery capabilities. Methods: The optimization process involved applying QbD principles and DOE to achieve the desired formulation characteristics. Superparamagnetic iron oxide nanoparticles (SPIONs) were incorporated to impart magnetic responsiveness. The size, entrapment efficiency, morphology, and in vitro release patterns of the FSB formulation were evaluated. Additionally, an in situ forming hydrogel incorporating FSB was developed, with its gelation time and drug release kinetics assessed. In vivo studies were conducted on osteoarthritic rats to evaluate the efficacy of the FSB-loaded hydrogel. Results: The optimized FSB formulation yielded particles with a size of 453.60 nm and an entrapment efficiency of 91.57%. The incorporation of SPIONs enhanced magnetic responsiveness. Morphological evaluations and in vitro release studies confirmed the structural integrity and sustained release characteristics of the FSB formulation. The in situ forming hydrogel exhibited a rapid gelation time of approximately 40 ± 1.8 s and controlled drug release kinetics. In vivo studies demonstrated a 27.83% reduction in joint inflammation and an 85% improvement in locomotor activity in osteoarthritic rats treated with FSB-loaded hydrogel. Discussion: This comprehensive investigation highlights the potential of FSB as a promising targeted drug delivery system for the effective management of osteoarthritis. The use of QbD and DOE in the formulation process, along with the integration of SPIONs, resulted in an optimized FSB formulation with enhanced entrapment efficiency and targeted delivery capabilities. The in situ forming hydrogel further supported the formulation's applicability for injectable applications, providing rapid gelation and sustained drug release. The in vivo results corroborate the formulation's efficacy, underscoring its potential for improving the treatment of osteoarthritis.

Magnetic stirring with iron oxide nanospinners accretes neurotoxic Aß42 oligomers into phagocytic clearable plaques for Alzheimer's disease treatment.

An increasing number of medications have been explored to treat the progressive and irreversible Alzheimer's disease (AD) that stands as the predominant form of dementia among neurodegenerative ailments. However, assertions about toxic side effects of these drugs are a significant hurdle to overcome, calling for drug-free nanotherapeutics. Herein, a new therapeutic strategy devoid of conventional drugs or other cytotoxic species was developed. The constructed superparamagnetic iron oxide nanoparticles (SPIONs) nanospinners can accrete neurotoxic ß-amyloid 42 oligomers (oAß42) into aggregated magnetic plaques (mpAß) by mechanical rotating force via remote interaction between nanoparticles and the applied magnetic field. While the cellular uptake of mpAß attained from the magnetic stirring treatment by neuronal cells is severely limited, the facile phagocytic uptake of mpAß by microglial cells leads to the polarization of the brain macrophages to M2 phenotype and thus the increased anti-inflammatory responses to the treatment. The SPION stirring treatment protects the AD mice from memory deterioration and maintain cognitive ability as evidenced from both nesting and Barnes maze tests. The examination of the oAß42 injected brain tissues with the stirring treatment showed significant amelioration of functional impairment of neurons, microglia, astrocytes and oligodendrocytes alongside no obvious tissue damage caused by stirring meanwhile complete degradation of SPION was observed at day 7 after the treatment. The in vitro and animal data of this work strongly corroborate that this new modality of undruggable stirring treatment with SPIONs provides a new feasible strategy for developing novel AD treatments.

Benzimidazolium Salt Modified Microporous Silica-Coupled Iron Oxide Nanoparticles: Material Engineered for Nitrate Removal.

Today's extensive use of inorganic fertilizers in agricultural techniques has increased the concentration of nitrate in drinking water beyond safety limits, causing serious health problems in humans such as thyroidism and methemoglobinemia. Therefore, the present work describes the synthesis of a benzimidazolium salt-based fluorescent chemosensor (KG3) via a multistep synthesis which detects nitrate ions in aqueous medium. This was validated using various analytical techniques such as fluorescence spectroscopy, UV-visible spectroscopy, and electrochemical studies with a detection limit of 0.032 µM without any interference from other active water pollutants. Subsequently, KG3 is further modified with the help of iron oxide nanoparticles (Fe3O4 NPs) and silica to obtain the SiO2@Fe3O4-KG3 nanocomposite, which was immobilized over a polyether sulfone membrane and evaluated for removal of nitrate ions from groundwater with a removal efficiency of 96%. Moreover, the engineered composite membrane can serve as a solid-state fluorescence sensor to detect NO3- ions, which was demonstrated through a portable mobile-based prototype employing a hue, saturation, and value parameter model.

Environmental remediation and sustainable design of iron oxide nanoparticles for removal of petroleum-derived pollutants from water: A critical review.

The global problem of major oil spills not only generates crude oil pollution, but produces many derivatives that pose ecological and human health challenges. While extensive research has focused on understanding the types of these contaminants, their transport modes, detection techniques, and ecotoxicological impacts, there are still significant research gaps in mechanisms for removal of petroleum-derived pollutants by iron oxide nanoparticles (IONPs). This work summarizes systematically the types and green synthesis of IONPs for the environmental remediation of various petroleum contaminants. We also provide comprehensive coverage of the excellent removal capacity and latest environmental remediation of IONPs-based materials (e.g., pristine, modified, or porous-supported IONPs materials) for the removal of petroleum-derived pollutants, potential interaction mechanisms (e.g., adsorption, photocatalytic oxidation, and synergistic biodegradation). A sustainable framework was highlighted in depth based on a careful assessment of the environmental impacts, associated hazards, and economic viability. Finally, the review provides an possible improvements of IONPs for petroleum-derived pollutants remediation and sustainable design on future prospect. In the current global environment of pollution reduction and carbon reduction, this information is very important for researchers to synthesize and screen suitable IONPs for the control and eradication of future petroleum-based pollutants with low environmental impact.

Study on the synthesis of iron-based nanomedicine assisted by angelica sinensis polysaccharide with enhanced retention performance and its application in anemia treatment.

Inappropriate treatment of chronic inflammation and infection can lead to serious consequences, with anemia being the most common secondary disease that often requires systematic treatment. However, the complex pathology and gastrointestinal irritation associated with oral iron supplements limit their effectiveness. To address this, a bioactive ingredient derived from natural herbs, Angelica sinensis polysaccharide (ASP), was utilized as an ideal adjuvant for regulating the size and stability of iron oxide nanoparticles (IONPs). Highly hydrophilic ASP-modified IONPs (IONPs@ASP) with a mesoporous structure were developed under the induction of microemulsion.The as-prepared IONPs@ASP exhibited enhanced stability, retention performance and controlled degradation in blood and lysosomal environments, respectively, which is beneficial for long-term intravenous iron maintenance in anemia treatment. After confirming the biosafety of IONPs@ASP, pharmacodynamic results showed that hemoglobin levels increased significantly and rapidly returned to normal levels in anemia model rats treated with IONPs@ASP, even surpassing the effects of IONPs or ASP monotherapy. Additionally, analysis of inflammatory factors in rat serum suggested that ASP effectively upregulated the expression of anti-inflammatory factors, indicating synergistic effects of iron-based nanomedicine and immune regulation in anemia treatment. These findings represent a significant advancement in anemia treatment and open new possibilities for developing versatile nanoparticles based on ASP.

Investigating the binding affinity, molecular dynamics, and ADMET properties of curcumin-IONPs as a mucoadhesive bioavailable oral treatment for iron deficiency anemia.

Iron deficiency anemia (IDA) is a common health issue, and researchers are interested in overcoming it. Nanotechnology green synthesis is one of the recent approaches to making efficient drugs. In this study, we modeled curcumin-coated iron oxide nanoparticles (cur-IONPs) to study their predicted toxicity and drug-likeness properties, then to investigate mucoadhesive behavior by docking cur-IONPs with two main mucin proteins in gastrointestinal tract (GIT) mucosa (muc 5AC and muc 2). Furthermore, the stability of cur-IONPs/protein complexes was assessed by molecular dynamics. Our in-silico studies results showed that cur-IONPs were predicted to be potential candidates to treat IDA due to its mucoadhesive properties, which could enhance the bioavailability, time residency, and iron absorbance through GIT, in addition to its high safety profile with high drug-likeness properties and oral bioavailability. Finally, molecular dynamic simulation studies revealed stable complexes supporting strength docking studies. Our results focus on the high importance of in-silico drug design studies; however, they need to be supported with in vitro and in vivo studies to reveal the efficacy, toxicity, and bioavailability of cur-IONPs.

Magnetic nanomagnetic nanoparticles combining with Slit2 gene and bone marrow mononuclear cells to improve cognitive dysfunction in rats with chronic cerebral ischemia.

Purpose: Cognitive dysfunction caused by chronic cerebral hypoperfusion (CCH) is the leading cause of vascular dementia. Therefore, it is necessary to explore the mechanism that causes cerebral injury and find an effective therapy. Methods: Bone marrow mononuclear cells (BMMNCs) were extracted to detect the activity by CCK-8 kit and verify the transfection efficiency using reverse transcription-quantitative real-time polymerase chain reaction (RT-qPCR). A CCH rat model was established. Superparamagnetic iron oxide nanoparticles (BMPs)-PEI-Slit2/BMMNCs were injected into the tail vein and intervened with an external magnetic field. Hematoxylin and eosin staining was used to observe the pathological changes in brain tissue. The Slit/Robo pathway-related proteins Slit2 and Robo4 were detected by RT-qPCR and Western blotting. Results: The neurological score of the CCH group significantly increased compared with that of the sham group (P<0.05). The levels of brain injury markers S-100ß and NSE were significantly higher in the CCH group than in the sham group (P<0.05). Neuronal apoptosis in the frontal cortex and hippocampus of CCH rats significantly increased compared with that of the sham group (P<0.05). The expression levels of Slit2 and Robo4 mRNAs and proteins in brain tissue of CCH rats significantly increased (P<0.05). The neurological function scores of CCH rats treated with BMP-PEI-Slit2/BMMNC significantly increased after Robo4 siRNA administration (P<0.05). Conclusion: BMP combination with the CCH-related gene Slit2 can effectively improve the efficiency of BMMNC transplantation in treatment.