Insight into the sorption and desorption pattern of pyrrolizidine alkaloids and their N-oxides in acidic tea (Camellia sinensis) plantation soils.

Pyrrolizidine alkaloids (PAs) and their N-oxides (PANOs) are phytotoxins produced by various plant species and have been emerged as environmental pollutants. The sorption/desorption behaviors of PAs/PANOs in soil are crucial due to the horizontal transfer of these natural products from PA-producing plants to soil and subsequently absorbed by plant roots. This study firstly investigated the sorption/desorption behaviors of PAs/PANOs in tea plantation soils with distinct characteristics. Sorption amounts for seneciphylline (Sp) and seneciphylline-N-oxide (SpNO) in three acidic soils ranged from 2.9 to 5.9 µg/g and 1.7 to 2.8 µg/g, respectively. Desorption percentages for Sp and SpNO were from 22.2% to 30.5% and 36.1% to 43.9%. In the mixed PAs/PANOs systems, stronger sorption of PAs over PANOs was occurred in tested soils. Additionally, the Freundlich models more precisely described the sorption/desorption isotherms. Cation exchange capacity, sand content and total nitrogen were identified as major influencing factors by linear regression models. Overall, the soils exhibiting higher sorption capacities for compounds with greater hydrophobicity. PANOs were more likely to migrate within soils and be absorbed by tea plants. It contributes to the understanding of environmental fate of PAs/PANOs in tea plantations and provides basic data and clues for the development of PAs/PANOs reduction technology.

Development of an equation to predict delta bilirubin levels using machine learning.

OBJECTIVE: Delta bilirubin (albumin-covalently bound bilirubin) may provide important clinical utility in identifying impaired hepatic excretion of conjugated bilirubin, but it cannot be measured in real-time for diagnostic purposes in clinical laboratories. METHODS: A total of 210 samples were collected, and their delta bilirubin levels were measured four times using high-performance liquid chromatography. Data collected included age, sex, diagnosis code, delta bilirubin, total bilirubin, direct bilirubin, total protein, albumin, globulin, aspartate aminotransferase, alanine transaminase, alkaline phosphatase, gamma-glutamyl transferase, lactate dehydrogenase, hemoglobin, serum hemolysis value, hemolysis index, icterus value (Iv), icterus index (Ii), lipemia value (Lv), and lipemia index. To conduct feature selection and identify the optimal combination of variables, linear regression machine learning was performed 1,000 times. RESULTS: The selected variables were total bilirubin, direct bilirubin, total protein, albumin, hemoglobin, Iv, Ii, and Lv. The best predictive performance for high delta bilirubin concentrations was achieved with the combination of albumin-direct bilirubin-hemoglobin-Iv-Lv. The final equation composed of these variables was as follows: delta bilirubin = 0.35 × Iv + 0.05 × Lv - 0.23 × direct bilirubin - 0.05 × hemoglobin - 0.04 × albumin + 0.10. CONCLUSION: The equation established in this study is practical and can be easily applied in real-time in clinical laboratories.

Dominant role of soil iron and organic matters in arsenic transfer from soil to plant in a mine area in Hunan Province, Central China.

The transfer of arsenic (As) from soil to plant could be significantly influenced by soil parameters through regulating soil As bioavailability. To distinguish the bioavailable As provided by soil and the As uptaken by plants, herein two different soil bioavailable were defined, namely potential soil bioavailable As (evaluated through the bioavailable fraction of As) and actual soil bioavailable As (assessed through plant bioaccumulation factor, BF, and BFavailable). To identify the dominant soil parameters for the two soil bioavailable As forms, soil and plant samples were collected from a former As mine site. The results showed that the potential bioavailable As only accounted for 1.77 to 11.43% in the sampled soils, while the BF and BFavailable in the sampled vegetables ranged from 0.00 to 1.01 and 0.01 to 17.87, respectively. Despite a similar proportion of As in the residual fraction, soil with higher pH and organic matter (OM) content and lower iron (Fe) content showed a higher potential soil bioavailable As. Correlation analysis indicated a relationship between the soil pH and potential soil bioavailable As (r = 0.543, p < 0.01) and between the soil Fe and actual soil bioavailable As (r = - 0.644, p < 0.05, r = - 0.594, p < 0.05). Stepwise multiple linear regression (SMLR) analysis was employed to identify the dominant soil parameters and showed that soil pH and phosphorus (P) content could be used to predict the potential soil bioavailable As (R2 = 0.69, p < 0.001). On the other hand, soil Fe and OM could be used to predict the actual soil bioavailable As (R2 = 0.18-0.86, p < 0.001-0.015, in different vegetables). These results suggest that different soil parameters affect potential and actual soil bioavailable As. Hence, soil Fe and OM are the most important parameters controlling As transfer from soil to plant in the investigated area.

Multi-parameter viscoelastic material model for denture adhesives based on time-temperature superposition and multiple linear regression analysis.

BACKGROUND: Restorative solutions designed for edentulous patients such as dentures and their accompanying denture adhesives operate in the complex and dynamic environment represented by human oral physiology. Developing material models accounting for the viscoelastic behavior of denture adhesives can facilitate their further optimization within that unique physiological environment. This study aims to statistically quantify the degree of significance of three physiological variables - namely: temperature, adhesive swelling, and pH - on denture adhesive mechanical behavior. Further, based on these statistical significance estimations, a previously-developed viscoelastic material modelling approach for such denture adhesives is further expanded and developed to capture these variables' effects on mechanical behavior. METHODS: In this study a comparable version of Denture adhesive Corega Comfort was analysed rheologically using the steady state frequency sweep tests. The experimentally derived rheological storage and loss modulus values for the selected physiological variables were statistically analyzed using multi parameter linear regression analysis and the Pearson's coefficient technique to understand the significance of each individual parameter on the relaxation spectrum of the denture adhesive. Subsequently, the parameters are incorporated into a viscoelastic material model based on Prony series discretization and time-temperature superposition, and the mathematical relationship for the loss modulus is deduced. RESULTS: The results of this study clearly indicated that the variation in both the storage and loss modulus values can be accurately predicted using the oral cavity physiological parameters of temperature, swelling ratio, and pH with an adjusted R2 value of 0.85. The R2 value from the multi-parameter regression analysis indicated that the predictor variables can estimate the loss and storage modulus with a reasonable accuracy for at least 85% of the rheologically determined continuous relaxation spectrum with a confidence level of 98%. The Pearson's coefficient for the independent variables indicated that temperature and swelling have a strong influence on the loss modulus, whereas pH had a weak influence. Based on statistical analysis, these mathematical relationships were further developed in this study. CONCLUSIONS: This multi-parameter viscoelastic material model is intended to facilitate future detailed numerical investigations performed with implementation of denture adhesives using the finite element method.

Orthodontic treatment outcome predictive performance differences between artificial intelligence and conventional methods.

OBJECTIVES: To evaluate an artificial intelligence (AI) model in predicting soft tissue and alveolar bone changes following orthodontic treatment and compare the predictive performance of the AI model with conventional prediction models. MATERIALS AND METHODS: A total of 1774 lateral cephalograms of 887 adult patients who had undergone orthodontic treatment were collected. Patients who had orthognathic surgery were excluded. On each cephalogram, 78 landmarks were detected using PIPNet-based AI. Prediction models consisted of 132 predictor variables and 88 outcome variables. Predictor variables were demographics (age, sex), clinical (treatment time, premolar extraction), and Cartesian coordinates of the 64 anatomic landmarks. Outcome variables were Cartesian coordinates of the 22 soft tissue and 22 hard tissue landmarks after orthodontic treatment. The AI prediction model was based on the TabNet deep neural network. Two conventional statistical methods, multivariate multiple linear regression (MMLR) and partial least squares regression (PLSR), were each implemented for comparison. Prediction accuracy among the methods was compared. RESULTS: Overall, MMLR demonstrated the most accurate results, while AI was least accurate. AI showed superior predictions in only 5 of the 44 anatomic landmarks, all of which were soft tissue landmarks inferior to menton to the terminal point of the neck. CONCLUSIONS: When predicting changes following orthodontic treatment, AI was not as effective as conventional statistical methods. However, AI had an outstanding advantage in predicting soft tissue landmarks with substantial variability. Overall, results may indicate the need for a hybrid prediction model that combines conventional and AI methods.

A cross-sectional study on predictors of patients' tinnitus severity.

Objective: To identify factors that influence the severity of tinnitus via a hierarchical multiple linear regression model. Methods: The study was a retrospective cross-sectional analysis. The study included 331 patients experiencing tinnitus as their primary concern, who visited Shanghai Changzheng Hospital of the Navy Medical University between 2019 and 2021. Data on general health status and disease characteristics were collected from all patients. With their consent, participants underwent audiological evaluatons and completed questionnaires to analyze the characteristics of their tinnitus and the factors influencing its severity. Results: The correlation analysis showed a positive relationship between tinnitus frequency, tinnitus loudness, SAS scores, and PSQI scores with THI scores (P < 0.05) among nine examined variables (gender, handedness, employment status, age, BMI, tinnitus frequency, tinnitus loudness, SAS scores, and PSQI scores). The variables that were extracted from the multiple regression were; for the constant; ß = -51.797, t = -4.484, P < 0.001, variable is significant; for the tinnitus loudness; ß = 0.161, t = 2.604, P < 0.05, variable is significant; for the tinnitus frequency; ß = 0.000, t = 1.269, P = 0.206, variable is not significant; for the SAS scores; ß = 1.310, t = 7.685, P < 0.001, variable is significant; for the PSQI scores; ß = 1.680, t = 5.433, P < 0.001, variable is significant. Therefore, the most accurate model for predicting severity in tinnitus patients is a linear combination of the constant, tinnitus loudness, SAS scores, and PSQI scores, Y(Tinnitus severity) = ß 0 + ß 1 (Tinnitus loudness) + ß 2 (SAS scores) + ß 3 (PSQI scores). ß 0, ß 1, ß 2, and ß 3 are -51.797, 0.161, 1.310 and 1.680, respectively. Conclusion: Tinnitus severity is positively associated with loudness, anxiety levels, and sleep quality. To effectively manage tinnitus in patients, it is essential to promptly identify and address these accompanying factors and related symptoms.

Hyperspectral Characteristics and SPAD Estimation of Wheat Leaves under CO2 Microleakage Stress.

To non-destructively and rapidly monitor the chlorophyll content of winter wheat leaves under CO2 microleakage stress, and to establish the quantitative relationship between chlorophyll content and sensitive bands in the winter wheat growing season from 2023 to 2024, the leakage rate was set to 1 L/min, 3 L/min, 5 L/min, and 0 L/min through field experiments. The dimensional reduction was realized, fractional differential processing of a wheat canopy spectrum was carried out, a multiple linear regression (MLR) and partial least squares regression (PLSR) estimation model was constructed using a SPA selection band, and the model's accuracy was evaluated. The optimal model for hyperspectral estimation of wheat SPAD under CO2 microleakage stress was screened. The results show that the spectral curves of winter wheat leaves under CO2 microleakage stress showed a "red shift" of the green peak and a "blue shift" of the red edge. Compared with 1 L/min and 3 L/min, wheat leaves were more affected by CO2 at 5 L/min. Evaluation of the accuracy of the MLR and PLSR models shows that the MLR model is better, where the MLR estimation model based on 1.1, 1.8, 0.4, and 1.7 differential SPAD is the best for leakage rates of 1 L/min, 3 L/min, 5 L/min, and 0 L/min, with validation set R2 of 0.832, 0.760, 0.928, and 0.773, which are 11.528, 14.2, 17.048, and 37.3% higher than the raw spectra, respectively. This method can be used to estimate the chlorophyll content of winter wheat leaves under CO2 trace-leakage stress and to dynamically monitor CO2 trace-leakage stress in crops.

The application of fractional calculus in economic growth modelling: An approach based on regression analysis.

This paper establishes a fractional-order economic growth model to model the gross domestic product (GDP). The fractional-order model consists of a differential equation of integer and fractional orders, where the GDP is a function of several exploratory variables. An empirical application is adopted using Malaysia's GDP data from 1956 to 2018, incorporating exploratory variables such as total population, crude death rate, production of logs, gross fixed capital formation, exports of goods and services, general government final consumption expenditure, private final consumption expenditure, and the impact of investment. Extensive comparisons were carried out to evaluate the modelling performance of the full and reduced fractional-order multiple linear regression models with the benchmark models, namely full and reduced integer-order multiple linear regression models. Results indicate that the reduced fractional-order model with six exploratory variables, excluding the crude death rate and production of logs, predominates other models for the in-sample model fitting based on the Akaike information criterion, coefficient of determination and other criteria. Furthermore, the fractional-order model offers the best-of-sample forecasts evaluated based on the root mean square forecast error and mean absolute forecast error. The application of the Diebold-Mariano test also serves to confirm the superior performance of the suggested fractional-order model, revealing a significant difference in forecasting ability between the fractional-order and integer-order models.

Developing an integrated model relating substrate water content to indoor temperature reduction for irrigation-decision support of a green roof.

This study analyzes the influences of evapotranspiration or substrate moisture variation on the indoor-temperature reduction of green roofs compared to the control group. A multiple linear regression (MLR) model for the operation stage based on observation and an integrated MLR model for the planning stage based on simulation are verified. The MLR model shows 0.64 °C of the Root Mean Square Error (RMSE) in predicting the hourly difference of temperature reduction based on the measured change in evapotranspiration and air temperature. The contributions of the hourly increment of air temperature (ΔTa) and increment of evapotranspiration (ΔET) are similar to the hourly increment of temperature reduction (ΔTdif). Then, the feasibility of the integrated MLR model is demonstrated based on the evapotranspiration and substrate moisture of a green roof simulated by a hydrological model as well as the indoor-temperature reduction simulated by a building energy model, which has fair performances in capturing the heat-transfer and water-balance physical process within a green roof. The integrated MLR model shows that evapotranspiration is relatively essential, followed by substrate moisture, air temperature, and vapor pressure. Despite the modeling bias, the integrated model quantitatively relates the influential factors to temperature reduction and predicts temperature reduction with an RMSE of 1.02 °C. The integrated model can quantify the influence of irrigation on temperature reduction under various climate conditions and green roof structures. This study demonstrates the procedure of establishing the integrated model. It shows the potential of the integrated model to provide decision support on irrigation for multi-purpose optimization of green roof performances.

Assessment of oxygen kinetic parameters for closely related ammonia-oxidizing bacteria.

The reaction kinetics of lithotrophic ammonia-oxidizing bacteria (AOB) are strongly dependent on dissolved oxygen (DO) as their metabolism is an aerobic process. In this study, we estimate the kinetic parameters, including the oxygen affinity constant (Km[O2]) and the maximum oxygen consumption rate (Vmax[O2]), of different AOB species, by fitting the data to the Michaelis-Menten equation using nonlinear regression analysis. An example for three different species of Nitrosomonas bacteria (N. europaea, N. eutropha, and N. mobilis) in monoculture is given, finding a Km[O2] of 0.25 ± 0.05 mg l-1, 0.47 ± 0.09 mg l-1, and 0.28 ± 0.08 mg l-1, and a Vmax[O2] of 0.07 ± 0.04 pg h-1cell-1, 0.25 ± 0.06 pg h-1cell-1, and 0.02 ± 0.001 pg h-1cell-1 for N. europaea, N. eutropha, and N. mobilis, respectively. This study shows that of the analyzed AOB, N. europaea has the highest affinity towards oxygen and N. eutropha the lowest affinity towards oxygen, indicating that the former can convert ammonia even under low DO conditions. These results improve the understanding of the ecophysiology of AOB in the environment. The accuracy of mathematically modelled ammonia oxidation can be improved, allowing the implementation of better management practices to restore the nitrogen cycle in natural and engineered water systems.

Relationship between serum iron, zinc, calcium, and HIF-1a-comparative analysis of 2 regions and 4 ethnic groups in China.

Background: Altitude illness has serious effects on individuals who are not adequately acclimatized to high-altitude areas and may even lead to death. However, the individualized mechanisms of onset and preventive measures are not fully elucidated at present, especially the relationship between altitude illness and elements, which requires further in-depth research. Methods: Fresh serum samples were collected from individuals who underwent health examinations at the two hospitals in Xining and Sanya between November 2021 and December 2021. The blood zinc (Zn), iron (Fe), and calcium (Ca) concentrations, as well as hypoxia-inducible factor 1-alpha (HIF-1α) concentrations, were measured. This study conducted effective sample size estimation, repeated experiments, and used GraphPad Prism 9.0 and IBM SPSS version 19.0 software for comparative analysis of differences in the expression of elements and HIF-1α among different ethnic groups, altitudes, and concentration groups. Linear regression and multiple linear regression were employed to explore the relationships among elements and their correlation with HIF-1α. Results: This study included a total of 400 participants. The results from the repeated measurements indicated that the consistency of the laboratory test results was satisfactory. In terms of altitude differences, except for Fe (p = 0.767), which did not show significant variance between low and high altitude regions, Zn, Ca, and HIF-1α elements all exhibited notable differences between these areas (p < 0.0001, p = 0.004, and p < 0.0001). When grouping by the concentrations of elements and HIF-1α, the results revealed significant variations in the distribution of zinc among different levels of iron and HIF-1α (p < 0.05). The outcomes of the linear regression analysis demonstrated that calcium and zinc, iron and HIF-1α, calcium and HIF-1α, and zinc and HIF-1α displayed substantial overall explanatory power across different subgroups (p < 0.05). Finally, the results of the multiple linear regression analysis indicated that within the high-altitude population, the Li ethnic group in Sanya, and the Han ethnic group in Sanya, the multiple linear regression model with HIF-1αas the dependent variable and elements as the independent variables exhibited noteworthy overall explanatory power (p < 0.05). Conclusion: The levels of typical elements and HIF-1α in the blood differ among various altitudes and ethnic groups, and these distinctions may be linked to the occurrence and progression of high-altitude illness.

Run-time motion and first-order shim control by expanded servo navigation.

PURPOSE: To provide a navigator-based run-time motion and first-order field correction for three-dimensional human brain imaging with high precision, minimal calibration and acquisition, and fast processing. METHODS: A complex-valued linear perturbation model with feedback control is extended to estimate and correct for gradient shim fields using orbital navigators (2.3 ms). Two approaches for sensitizing the model to gradient fields are presented, one based on finite differences with three additional navigators, and another projection-based approximation requiring no additional navigators. A mechanism for noise decorrelation of the matrix and the data is proposed and evaluated to reduce unwanted parameter biases. RESULTS: The rigid motion and first-order field control achieves robust motion and gradient shim corrections improving image quality in a series of phantom and in vivo experiments with varying field conditions. In phantom scans, magnet drifts, forced gradient field perturbations and field distortions from shifts of a second bottle phantom are successfully corrected. Field estimates of the magnet drifts are in good agreement with concurrent field probe measurements. For in vivo scans, the proposed method mitigates field variations from torso motions while being robust to head motion. In vivo gradient field precisions were 30 nT / m $$ 30\;\mathrm{nT}/\mathrm{m} $$ along with single-digit micrometer and millidegree rigid precisions. CONCLUSION: The navigator-based method achieves accurate, high-precision run-time motion and field corrections with low sequence impact and calibration requirements.

XGBoost algorithm assisted multi-component quantitative analysis with Raman spectroscopy.

To improve prediction performance and reduce artifacts in Raman spectra, we developed an eXtreme Gradient Boosting (XGBoost) preprocessing method to preprocess the Raman spectra of glucose, glycerol and ethanol mixtures. To ensure the robustness and reliability of the XGBoost preprocessing method, an X-LR model (which combined XGBoost preprocessing and a linear regression (LR) model) and a X-MLP model (which combined XGBoost preprocessing and a multilayer perceptron (MLP) model) were developed. These two models were used to quantitatively analyze the concentrations of glucose, glycerol and ethanol in the Raman spectra of mixed solutions. The proportion map of hyperparameters was firstly used to narrow down the search range of hyperparameters in the X-LR and the X-MLP models. Then the correlation coefficients (R2), root mean square of calibration (RMSEC), and root mean square error of prediction (RMSEP) were used to evaluate the models' performance. Experimental results indicated that the XGBoost preprocessing method achieved higher accuracy and generalization capability, with better performance than those of other preprocessing methods for both LR and MLP models.

Machine learning method predicting thermal performance of conformal cooling systems.

The incorporation of conformal cooling systems has significantly enhanced the efficiency and quality of injection molding process. While several automated methods have been developed for creating conformal cooling channels in injection molds, the current optimization process for conformal cooling design parameters is hindered by labor-intensive iterative thermal simulation processes and the substantial reliance on empirical human knowledge. This paper presents an innovative machine learning method to assess the thermal performance of conformal cooling systems by employing a combination of a non-linear regression model and a neural network. By employing a logarithmic regression model describing the temperature graph and a neural network predicting the coefficients of the logarithmic regression model, the thermal performance of specified conformal cooling systems can be assessed and predicted precisely. This methodology empowers designers to evaluate the thermal efficiency of conformal cooling systems efficiently and effectively to further optimize the conformal cooling design parameters without relying on tedious manual thermal and fluid simulation processes.

Comparison of Adverse Events Following Immunosuppressant Administration for Pediatric Patients With Renal Transplants Categorized by Two-Year Age Increments Using the U.S. Food and Drug Administration Adverse Event Reporting System.

Background Immunosuppressants are frequently administered to prevent transplant rejection in patients with renal transplants but cause various adverse events. The incidence of each adverse event may differ between pediatric and adult patients with renal transplants. Because the development of organs and bodies in pediatric patients varies greatly annually, the incidence of each adverse event following immunosuppressant administration may vary by age. Consequently, the age-specific incidence of each adverse event in pediatric patients represents invaluable information for clinical settings. To clarify trends in the occurrence of adverse events by age, a large sample size for each age is required. However, it is difficult to conduct clinical trials in pediatric patients with renal transplants with a large sample size for each age. One method to address this difficulty is to use a database.  Objectives This study aimed to investigate the trends in the occurrence of each adverse event following immunosuppressant administration in pediatric patients with renal transplants, categorized by two-year age increments. Methods We extracted data on pediatric patients aged 0-17 years who received immunosuppressants after renal transplant between January 2004 and March 2024 from the U.S. Food and Drug Administration Adverse Event Reporting System. Because adverse events were greatly affected by age, the patients were divided into groups by two-year age increments. We analyzed the relationship between the groups and the reporting proportion of each adverse event by using the reporting regression coefficient (RRC) from univariate regression analysis and the adjusted RRC (aRRC), which controlled for differences in patient background. Results Renal tubular necrosis, renal impairment, chronic allograft nephropathy, and headache were the adverse events that required more attention with increasing age because RRC and aRRC were significantly > 0. By contrast, Epstein-Barr virus infection was the adverse event that required attention, especially in younger pediatric patients, because RRC and aRRC were significantly < 0. Additionally, there were various trends among other adverse events, including those that required careful monitoring across all ages 0-17 years. Conclusions This study demonstrated that the types of adverse events requiring attention in pediatric patients with renal transplants differ by age. These findings can help enhance treatment and care in pediatric clinical settings.

Raising double-muscled breed cattle and their crossbreds in the tropics: insight from growth models.

Background and Aim: In tropical conditions, modeling the predictive parameters of live weight, including those at birth, pre-weaning, post-weaning, finishing, and maturing, and the average daily gain, is challenging. The heat load significantly influences the growth rate and final mature weights in the tropics. The study compared the growth rates of Kedah-Kelantan (KK), Brahman (BRAH), and Belgian Blue (BB) crossbred calves. Materials and Methods: The study conducted growth analysis using the non-linear regression growth models as it approximates the sex, breed, and growth physiology changes in beef cattle. It is supported by the utility of the most common growth functions (Brody, Logistic, von Bertalanffy, and Richard's model) in normal-muscled tropical breeds and double-muscled crossbred beef cattle in the tropics. Results: The BB crossbreds outperformed the KK and BRAH breeds by 50%-100% in live weight gains under tropical conditions. The crossbreds display the double-muscled effect and highlight the advantages of heterosis, making them suitable for upgrading local herds. The study's findings on the growth characteristics of BB crossbred cattle were best described by the von Bertalanffy growth model, which had a high coefficient of determination (R2 > 0.8) and yielded estimated mature weights of 527.5 kg for males and 518.5 kg for females. Conclusion: According to results, raising BB crossbreds in the tropics as a solution to ensure a sustainable beef supply could yield significant growth and economic benefits.

Understanding the drivers of PM2.5 concentrations in Chinese cities: A comprehensive study of anthropogenic and environmental factors.

Understanding the factors that drive PM2.5 concentrations in cities with varying population and land areas is crucial for promoting sustainable urban population health. This knowledge is particularly important for countries where air pollution is a significant challenge. Most existing studies have investigated either anthropogenic or environmental factors in isolation, often in limited geographic contexts; however, this study fills this knowledge gap. We employed a multimethodological approach, using both multiple linear regression models and geographically weighted regression (GWR), to assess the combined and individual effects of these factors across different cities in China. The variables considered were urban built-up area, land consumption rate (LCR), population size, population growth rate (PGR), longitude, and latitude. Compared with other studies, this study provides a more comprehensive understanding of PM2.5 drivers. The findings of this study showed that PGR and population size are key factors affecting PM2.5 concentrations in smaller cities. In addition, the extent of urban built-up areas exerts significant influence in medium and large cities. Latitude was found to be a positive predictor for PM2.5 concentrations across all city sizes. Interestingly, the northeast, south, and southwest regions demonstrated lower PM2.5 levels than the central, east, north, and northwest regions. The GWR model underscored the importance of considering spatial heterogeneity in policy interventions. However, this research is not without limitations. For instance, international pollution transfers were not considered. Despite the limitation, this study advances the existing literature by providing an understanding of how both anthropogenic and environmental factors, in conjunction with city scale, shape PM2.5 concentrations. This integrated approach offers invaluable insights for tailoring more effective air pollution management strategies across cities of different sizes and characteristics.

Estimating linear mixed effect models with non-normal random effects through saddlepoint approximation and its application in retail pricing analytics.

Linear Mixed Effects (LME) models are powerful statistical tools that have been employed in many different real-world applications such as retail data analytics, marketing measurement, and medical research. Statistical inference is often conducted via maximum likelihood estimation with Normality assumptions on the random effects. Nevertheless, for many applications in the retail industry, it is often necessary to consider non-Normal distributions on the random effects when considering the unknown parameters' business interpretations. Motivated by this need, a linear mixed effects model with possibly non-Normal distribution is studied in this research. We propose a general estimating framework based on a saddlepoint approximation (SA) of the probability density function of the dependent variable, which leads to constrained nonlinear optimization problems. The classical LME model with Normality assumption can then be viewed as a special case under the proposed general SA framework. Compared with the existing approach, the proposed method enhances the real-world interpretability of the estimates with satisfactory model fits.

Real-time IoT-powered AI system for monitoring and forecasting of air pollution in industrial environment.

Air pollution in industrial environments, particularly in the chrome plating process, poses significant health risks to workers due to high concentrations of hazardous pollutants. Exposure to substances like hexavalent chromium, volatile organic compounds (VOCs), and particulate matter can lead to severe health issues, including respiratory problems and lung cancer. Continuous monitoring and timely intervention are crucial to mitigate these risks. Traditional air quality monitoring methods often lack real-time data analysis and predictive capabilities, limiting their effectiveness in addressing pollution hazards proactively. This paper introduces a real-time air pollution monitoring and forecasting system specifically designed for the chrome plating industry. The system, supported by Internet of Things (IoT) sensors and AI approaches, detects a wide range of air pollutants, including NH3, CO, NO2, CH4, CO2, SO2, O3, PM2.5, and PM10, and provides real-time data on pollutant concentration levels. Data collected by the sensors are processed using LSTM, Random Forest, and Linear Regression models to predict pollution levels. The LSTM model achieved a coefficient of variation (R²) of 99 % and a mean absolute percentage error (MAE) of 0.33 for temperature and humidity forecasting. For PM2.5, the Random Forest model outperformed others, achieving an R² of 84 % and an MAE of 10.11. The system activates factory exhaust fans to circulate air when high pollution levels are predicted to occur in the next hours, allowing for proactive measures to improve air quality before issues arise. This innovative approach demonstrates significant advancements in industrial environmental monitoring, enabling dynamic responses to pollution and improving air quality in industrial settings.

Exploration of moisture activated dry granulation for the development of gastroretentive tablets aided by SeDeM diagram.

Moisture activated dry granulation (MADG) is an attractive granulation process. However, only a few works have explored modified drug release achieved by MADG, and to the best of the authors knowledge, none of them have explored gastroretention. The aim of this study was to explore the applicability of MADG process for developing gastroretentive placebo tablets, aided by SeDeM diagram. Floating and swelling capacities have been identified as critical quality attributes (CQAs). After a formulation screening step, the type and concentration of floating matrix formers and of binders were identified as the most relevant critical material attributes (CMAs) to investigate in ten formulations. A multiple linear regression analysis (MLRA) was applied against the factors that were varied to find the design space. An optimized product based on principal component analysis (PCA) results and MLRA was prepared and characterized. The granulate was also assessed by SeDeM. In conclusion, granulates lead to floating tablets with short floating lag time (<2min), long floating duration (>4h), and showing good swelling characteristics. The results obtained so far are promising enough to consider MADG as an advantageous granulation method to obtain gastroretentive tablets or even other controlled delivery systems requiring a relatively high content of absorbent materials in their composition.