FeCo@hydrochar nanocomposites as efficient peroxymonosulfate activator for organic pollutant degradation.

Sulfate radical-based advanced oxidation processes (SR-AOPs) are renowned for their exceptional capacity to degrade refractory organic pollutants due to their wide applicability, cost-effectiveness, and swift mineralization and oxidation rates. The primary sources of radicals in AOPs are persulfate (PS) and peroxymonosulfate (PMS) ions, sparking significant interest in their mechanistic and catalytic aspects. To develop a novel nanocatalyst for SR-AOPs, particularly for PMS activation, we synthesized carbon-coated FeCo nanoparticles (NPs) using solvothermal methods based on the polyol approach. Various synthesis conditions were investigated, and the NPs were thoroughly characterized regarding their structure, morphology, magnetic properties, and catalytic efficiency. The FeCo phase was primarily obtained at [OH-] / [Metal] = 26 and [Fe] / [Co] = 2 ratios. Moreover, as the [Fe]/[Co] ratio increased, the degree of xylose carbonization to form a carbon coating (hydrochar) on the NPs also increased. The NPs exhibited a spherical morphology with agglomerates of varying sizes. Vibrating-sample magnetometer analysis (VSM) indicated that a higher proportion of iron resulted in NPs with higher saturation magnetization (up to 167.8 emu g-1), attributed to a larger proportion of FeCo bcc phase in the nanocomposite. The best catalytic conditions for degrading 100 ppm Rhodamine B (RhB) included 0.05 g L-1 of NPs, 2 mM PMS, pH 7.0, and a 20-min reaction at 25 °C. Notably, singlet oxygen was the predominant specie formed in the experiments in the SR-AOP, followed by sulfate and hydroxyl radicals. The catalyst could be reused for up to five cycles, retaining over 98% RhB degradation, albeit with increased metal leaching. Even in the first use, dissolved Fe and Co concentrations were 0.8 ± 0.3 and 4.0 ± 0.5 mg L-1, respectively. The FeCo catalyst proved to be effective in dye degradation and offers the potential for further refinement to minimize Co2+ leaching.

Synthesis of novel pyrano[2,3-f]chromene-dione derivatives using phosphoric acid-functionalized silica-coated Fe3O4 nanoparticles as a new reusable solid acid nanocatalyst.

In this research, the synthesis of novel indeno[1,2-b]pyrano[2,3-f]chromene-2,12(13H)-dione derivatives in the presence of a newly introduced magnetically recoverable nanosolid acid catalyst is reported. At the first, phosphoric acid-functionalized silica-coated Fe3O4 nanoparticles (Fe3O4@SiO2-(CH2)3OPO3H2) were prepared and well characterized using infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and energy-dispersive X-ray spectroscopy (EDS) techniques. Then, the catalytic activity of the prepared Fe3O4@ SiO2-(CH2)3OPO3H2 nanocatalyst was investigated for the synthesis of novel indeno[1,2-b]pyrano[2,3-f]chromene-2,12(13H)-dione derivatives via a one-pot and three-component condensation between 5,7-dihydroxy-4-methylcoumarin, indane-1, 3-dione, and various aromatic aldehydes under solvent-free condition. All the products are unknown, and their characterization was performed with the spectral data information obtained from their FT-IR, 1H and 13CNMR, elemental analysis, and their melting points. The reusability study of the introduced nanosolid acid catalyst showed that the catalytic stability is almost completely remained up to five consecutive runs.

An efficient and heterogeneous Pd-containing modified graphene oxide catalyst for preparation of biaryl compounds.

In this research, a novel palladium-containing modified-graphene oxide (GO-N2S2/Pd) catalyst is designed and synthesized for the Suzuki-Miyaura reaction. The prepared catalyst was characterized by different techniques, such as thermogravimetric analysis (TGA), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), energy-dispersive X-ray (EDX), Raman spectroscopy, X-ray diffraction (XRD), and inductively coupled plasma optical emission spectrometry (ICP-OES). The catalytic performance of the synthesized catalyst was evaluated in the Suzuki cross-coupling reaction of phenylboronic acid and aryl halides with K2CO3 as a base. Good recoverability and reusability of this heterogeneous catalyst at the end of the reaction were observed.

Polymer Single Crystal As Magnetically Recoverable Support for Nanocatalysts.

In this Letter, we report, for the first time, using polymer single crystal as magnetically recoverable support for nanoparticle catalysts. This catalyst system is composed of polymer single crystal, platinum nanoparticles, and iron oxide nanoparticles, which act as support, catalysts, and magnetic responsive materials, respectively. Platinum nanoparticles and iron oxide nanoparticles were bonded onto thiol groups and hydroxyl groups on a tailor-designed polymer single-crystal surface. Because of its quasi 2D nature, polymer single crystal possesses high surface area to volume ratio (2.5 × 10(8) m(-1)), which is ∼40 times higher than its nanosphere counterpart of the same volume. This high surface to volume ratio facilitates the high loading of both nanoparticles, which ensures efficient catalytic reaction and reliable nanoparticle recycling. Synergetic interactions between platinum and iron oxide nanoparticles also led to further improvement in catalytic activity.