Marginal fit and retention force of zirconia resin-bonded fixed dental prostheses in the posterior region with different designs.

Background/purpose: Retainer debonding of resin-bonded fixed dental prostheses (RBFDPs) is one of the major reasons for their lower survival rates than fixed dental prostheses (FDPs) with full-coverage crowns. Recent advances in milling technology have enabled the fabrication of RBFDPs with complex retainers (D-shaped designs). This study aimed to assess the marginal fit and retention force of zirconia RBFDPs with inlay-, L-, and D-shaped designs to clarify their clinical applications. Materials and methods: Three abutment teeth models without maxillary second premolars were created using inlay-, L-, and D-shaped retainer designs. The zirconia RBFDPs were designed and fabricated according to the manufacturer's instructions (n = 10). The marginal gap was measured using the silicone replica technique. Zirconia frameworks were bonded to the abutment teeth using resin cement. Tensile test was conducted after thermal cycling and dynamic loading tests. The loads during debonding or fracture were recorded. The failure pattern was analyzed by observing the fracture surface using a scanning electron microscope. Results: D-shaped RBFDPs showed a significantly larger marginal gap than inlay- and L-shaped RBFDPs (P < 0.05). However, the mean marginal values were clinically acceptable (<120 µm). The D-shaped model exhibited the highest tensile strength in the tensile tests. The inlay-shaped and most of the D-shaped RBFDPs experienced debonding with cohesive failure, whereas the L-shaped RBFDPs showed fractures near the connector. Conclusion: The D-shaped retainer design was superior to the inlay- and L-shaped designs with respect to the inhibition of retainer debonding. However, the marginal fitness needs to be improved.

Posterior two-unit cantilevered zirconia resin-bonded fixed partial dentures: A 3-year prospective single-arm clinical trial.

OBJECTIVES: To evaluate the longevity of cantilevered zirconia-based resin-bonded fixed partial dentures (RBFPDs) in replacing missing posterior teeth, as well as the quality of life and patient satisfaction experienced by those receiving zirconia RBFPDs. METHODS: A prospective single-arm uncontrolled clinical trial was conducted to replace one or more missing premolars or molars with a span of 5 to 8 mm using cantilevered zirconia RBFPDs. Thirty-six participants with 40 prostheses were recruited and underwent a 3-year clinical evaluation. The retainer designs included a minimum thickness of 0.8 mm, a minimum of 200° circumferential wraparound with an occlusal bar, and a connector dimension of 3 × 3 mm. Patient-reported outcomes, including patient satisfaction and Oral Health Impact Profile (OHIP), were assessed. RESULTS: The average age of participants was 45.8 years, and 72.5 % were women. The success rate of the posterior zirconia RBFPDs was 76.2 %, with an estimated mean success duration of 46.1 months. The survival rate was 88.1 %, with an estimated mean survival duration of 49.4 months. Participants were highly satisfied with the treatment, achieving an average satisfaction score of 80.8 ± 11.9. Participants' total OHIP scores decreased from 52.3 to 39.6 after 3 years, indicating a significant improvement in oral health-related quality of life (P = 0.009). CONCLUSIONS: After 3 years, a moderately high survival rate and favourable patient-reported outcomes of posterior cantilevered zirconia RBFPDs were achieved. Therefore, it can be recommended as a conservative treatment option to replace missing posterior teeth, provided that retainer design considerations are taken into account. CLINICAL SIGNIFICANCE: Cantilevered zirconia RBFPDs for posterior teeth can serve as a conservative treatment option that is both aesthetically pleasing and biocompatible. It offers a more cost-effective alternative compared to dental implants, which are often prohibitively expensive for the majority of patients. This approach has the potential to greatly improve patient-reported outcomes.

Full-ceramic resin-bonded fixed dental prostheses: A systematic review.

Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study's objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.

Effect of orthodontics combined with fibre-reinforced composite resin-bonded fixed partial denture on anterior dentition defects with minimal vertical intermaxillary space.

BACKGROUND: Prosthodontics are often performed to treat patients with malocclusion and dentition defects. However, single prosthodontics cannot properly correct the disharmony of teeth, dental arch and other parts affected by malocclusion, and some patients may have difficulty in recovering the occlusal function due to poor prosthodontics. OBJECTIVE: This study aims to investigate the effect of orthodontics combined with fibre-reinforced composite resin-bonded fixed partial denture (FRC-RBFPD) on anterior dentition defects with minimal vertical intermaxillary space. METHODS: Sixty-two patients with anterior dentition defects with minimal vertical mandibular space admitted to our hospital between March 2021 and May 2023 were enrolled in this study. The participants were divided into the observation group (31 cases) and the control group (31 cases), according to the treatment plan. The control group was treated with traditional therapy, and the observation group was treated with orthodontic combined FRC-RBFPD therapy. Periodontal conditions (periodontal pocket depth [PD], the plaque index [PLI], the sulcus bleeding index [SBI]), levels of inflammatory factors in gingival crevicular fluid (high mobility group box 1 [HMGB1]), myeloid cell triggering receptor-1 (TREM-1), monocyte chemoattractant protein-1 (MCP-1), pain (visual analogue scale [VAS]), the clinical response rate and the incidence of adverse reactions were collected and compared. RESULTS: After 1, 3, 5 and 9 months following treatment, the scores of the PD, PLI, SBI, HMGB1, VAS, TREM-1 and MCP-1 in the observation group were found to be lower than those in the control group (FPD treatment= 352.532, FPLI score treatment= 112.341, FSBI score treatment= 79.479, FVAS score treatment= 96.132, FHMGB1 treatment= 52.532, FTREM-1 score treatment= 64.593, FMCP-1 score treatment= 53.582, and they were all statistically significant P< 0.05). There was a statistically significant difference in the response rate between the two groups (97.77% vs. 80.65%, χ2= 4.026, P= 0.045). No statistically significant difference was observed in the incidence of adverse reactions between the two groups (6.45% vs. 16.13%, χ2= 1.449, P= 0.229). CONCLUSION: Orthodontics combined with FRC-RBFPD shows an ideal restorative effect on patients with anterior dentition defects and minimal vertical intermaxillary space.

A dual composite resin injection molding technique with 3D-printed flexible indices for biomimetic replacement of a missing mandibular lateral incisor.

PATIENTS: This case report presents a minimally invasive approach to replace a missing mandibular lateral incisor using a dual-injection molding technique with flowable composite resins. Integrated with a comprehensive digital workflow, this method achieves a structurally and esthetically biomimetic, bi-layered prosthetic solution. A 34-year-old woman with congenital absence of a mandibular lateral incisor was successfully rehabilitated using a direct composite resin-bonded fixed partial denture (RBFPD). DISCUSSION: Two specialized three-dimensional (3D)-printed flexible indices stabilized by a custom-designed 3D-printed rigid holder were employed to ensure the meticulous injection molding of flowable composite resins formulated to emulate the inherent chromatic gradations between dentin and enamel. The inherent flexibility of the indices, combined with the holder, facilitated accurate and seamless adaptation to the complex morphological features of the dental arch, thereby mitigating the challenges commonly associated with rigid 3D-printed resin indices. CONCLUSIONS: The bilayered direct composite RBFPD using 3D printed flexible indices prepared with a full digital workflow has several advantages over other dental prosthetic solutions, including noninvasiveness, cost-effectiveness, biomimetic esthetics, repairability, and shortened treatment times. Although the initial results are promising, further longitudinal studies with larger patient cohorts are required to confirm the long-term efficacy of this approach.

Fracture strength of anterior cantilever resin-bonded fixed partial dentures fabricated from high translucency zirconia with different intaglio surface treatments.

PURPOSE: To compare the fracture resistance and failure modes of anterior cantilever resin-bonded fixed partial dentures (RBFPDs) fabricated from high translucency zirconia with different intaglio surface treatments. MATERIALS AND METHODS: Sound-extracted canines (N = 50) were randomly divided into five groups (n = 10) to be restored with high translucency zirconia RBFBDs of different intaglio surface treatments. The RBFPD was designed using exocad software and fabricated using a CAM milling machine. The RBFPDs were treated differently: abrasion with 50 µm alumina particles (Group 1); abrasion with 30 µm silica-coated alumina particles (Group 2); abrasion with silica-coated alumina particles (30 µm) and silane application (Group 3); abrasion with silica-coated alumina particles (30 µm) and 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) primer application (Group 4); abrasion with silica-coated alumina particles (30 µm) and silane, and 10-MDP primer application. All RBFPDs were cemented using dual-cured resin cement. The RBFPDs underwent 6000 thermal cycles with distilled water at 5/55°C for 2 min per cycle and then mechanical cyclic loading with 1200,000 cycles of 50 N at a 1.7 Hz frequency at an angle of 135° to the abutment's long axis. Then, RBFPDs were loaded to fracture using a universal testing machine at 1 mm/min. Maximum fracture forces and failure modes were recorded. Fractured specimens and uncemented specimens were examined using a scanning electron microscope. Data was analyzed using ANOVA and Games-Howell post hoc tests at p < 0.05. RESULTS: Mean fracture load results showed a statistically significant difference between the research groups (p < 0.0001) and it ranged from 69.78 to 584 N. Group 4 exhibited the highest fracture load mean (p < 0.0001) which was significantly different from all other groups. Group 2 recorded a significantly higher fracture load mean than Group 3 (p = 0.029). Three modes of failure were observed: prosthesis debonding, prosthesis fracture, and abutment fracture. CONCLUSIONS: Abrasion of zirconia surface with 30 µm silica-coated alumina particles and application of 10-MDP primer yielded the highest mean fracture loads of monolithic high translucency zirconia RBFPD. The mode of fracture of the RBFPDs was influenced by the type of surface treatments.

Terminology focused on design and retention methods used for anterior resin-bonded fixed partial dentures in English literature: A scoping review.

Purpose: Novel terms describing several designs of resin-bonded fixed partial dentures (RBFPDs) continue to appear. Indeed, a variety of terms are used in the English scientific literature The use of a standard terminology is important for a fair and efficient understanding. This study aimed to investigate if the terminology used to describe designs and retention methods for anterior RBFPDs is standard. Methods: An electronic search in the English literature was conducted in PubMed/Medline to identify all publications reporting RBFPDs in the anterior region until August 2022. This search was completed by hand searching. Terms indicating different designs of RBFPDs were listed and then classified. Percentages of their use were calculated to determine the commonly used terms. Analysis of the use of these terms was performed based on the standards determined by the latest edition of the Glossary of Prosthodontic Terms (GPT). The impacts of the MeSH Thesaurus and GPT on the nomenclature used for RBFPDs was assessed. Results: A total of 125 articles were eligible for this review. In the retained articles, 86 terms were found. Among them, thirty-nine terms were classified into three groups. Only six terms were defined in the latest edition of GPT (GPT-9). Several classified terms that are commonly used were not identified in the GPT-9. Conversely to the GPT-9 which impact was insignificant, the MeSH Thesaurus had an important impact on the nomenclature used for RBFPDs. Conclusion: The terminology used to describe designs and retention methods for anterior RBFPDs was non-standard. The GPT-9, constituting an important reference, defined a limited number of terms related to RBFPDs and had no significant impact on the standardization of the terminology used for RBFPDs. Efforts should therefore be continued to standardize the terminology. A specialized mini-glossary grouping and defining all the terms found in this study will helpful in clarifying the terminology used for the anterior RBFPDs.

Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis.

Debonding of zirconia cantilevered resin-bonded fixed dental prostheses (RBFDPs) remains the main treatment complication, therefore, the present in vitro study aimed to evaluate the effect of different surface pretreatments on the bonding of zirconia RBFDPs. Eighty milled zirconia maxillary central incisors, with complementary zirconia cantilevered RBFDPs, were randomly subjected to four different surface pretreatments (n = 20): as-machined (AM); airborne-particle abraded (APA); coated with nanostructured alumina coating (NAC); incisor air-abraded and RBFDP coated (NAC_APA). After bonding, half of each group (n = 10) was stored in deionized water (150 days/37 °C), thermocycled (37,500 cycles, 5-55 °C), and cyclically loaded (50 N/1.2 × 106). Load-bearing capacity (LBC) was determined using a quasi-static test. Additionally, finite element analysis (FEA) and fractography were performed. t-test and one-way ANOVA were used for statistical-analysis. Before aging, the NAC group provided superior LBC to other groups (p < 0.05). After aging, the AM specimens debonded spontaneously, while other groups exhibited comparable LBC (p ˃ 0.05). The FEA results correlated with the in vitro experiment and fractography, showing highly stressed areas in the bonding interface, cement layer, and in RBFDP's retainer wing and connector. The NAC RBFDPs exhibited comparable long-term bonding performance to APA and should be regarded as a zirconia pretreatment alternative to APA.

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study.

This study was conducted as a means to evaluate the stress distribution patterns of anterior ceramic resin-bonded fixed partial dentures derived from different materials and numerous connector designs that had various loading conditions imposed onto them through the utilization of the finite element method. A finite element model was established on the basis of the cone beam computed tomography image of a cantilevered resin-bonded fixed partial denture with a central incisor as an abutment and a lateral incisor as a pontic. Sixteen finite element models representing different conditions were simulated with lithium disilicate and zirconia. Connector height, width, and shape were set as the geometric parameters. Static loads of 100 N, 150 N, and 200 N were applied at 45 degrees to the pontic. The maximum equivalent stress values obtained for all finite element models were compared with the ultimate strengths of their materials. Higher load exhibited greater maximum equivalent stress in both materials, regardless of the connector width and shape. Loadings of 200 N and 150 N that were correspondingly simulated on lithium disilicate prostheses of all shapes and dimensions resulted in connector fractures. On the contrary, loadings of 200 N, 150 N, and 100 N with rectangular-shaped connectors correspondingly simulated on zirconia were able to withstand the loads. However, two of the trapezoidal-shaped zirconia connectors were unable to withstand the loads and resulted in fractures. It can be deduced that material type, shape, and connector dimensions concurrently influenced the integrity of the bridge.

A retrospective comparison of the survival of vital teeth adjacent to single, bounded edentulous spaces rehabilitated using implant-supported, resin-bonded, and conventional fixed dental prostheses.

OBJECTIVES: In this study, we aimed to compare the long-term survival of vital teeth adjacent to bounded edentulous spaces rehabilitated using an implant-supported prosthesis (ISP), a resin-bonded fixed partial denture (RBFPD), or a conventional fixed partial denture (CFPD). The risk factors for complications in teeth adjacent to the edentulous space (TAES) were also investigated. METHODS: We followed-up a consecutive series of 514 patients who underwent rehabilitation of a single bounded edentulous space with vital TAES (ISP: 103; RBFPD: 216; and CFPD: 195) from 2008 to 2017. Cumulative survival rates of prosthesis and TAES, and complication-free rates of TAES, were evaluated using the Kaplan-Meier analysis and log-rank test. Risk factors were evaluated using a Cox proportional hazards model. RESULTS: Cumulative complication-free rates of TAES showed no significant differences among the three groups. The cumulative survival rate of TAES in CFPD was significantly lower than that of ISP (p = 0.037); no significant differences were observed between ISP and RBFPD (p = 0.513), and RBFPD and CFPD (p = 0.076). Older age (p = 0.027) was the only independent significant risk factor for complications in TAES. Installation of CFPD (p = 0.019), ceramic prosthesis in edentulous space (p = 0.026), and deeper periodontal probing depth (p = 0.018) of TAES were significant risk factors for non-surviving TAES. CONCLUSIONS: Rehabilitating a single bounded edentulous space with CFPD could increase the risk for TAES loss compared with ISP. Risk of TAES loss remained similar between ISP and RBFPD, which can minimize the loss of coronal tooth structure during tooth preparation. CLINICAL SIGNIFICANCE: Teeth adjacent to edentulous space show equivalent longevity when rehabilitating a single bounded edentulous space with resin-bonded fixed partial dentures or single standing implant-supported prosthesis, at least 10 years post-installation.

Longevity of resin-bonded fixed partial dentures made of metal alloys: A review of the literature.

Purpose In this review, we evaluate the survival rate of resin-bonded fixed partial dentures (RBFPDs) made of metal alloys.Methods An electronic search of English peer-reviewed dental literature on PubMed was conducted to identify all publications reporting on RBFPDs made of metal alloys until March 2019. The searched keywords were: bridge OR fixed partial denture OR fixed prosthesis OR fixed prostheses AND resin bonded AND metal OR alloy AND survival OR longevity (RBFPD was not included). Furthermore, the "Related Articles" feature of PubMed was used to identify further references of interest during the primary search. A definitive list of articles was screened to extract qualitative data after the application of the inclusion and exclusion criteria, and the results were analyzed.Results Overall, 977 publications were found through an electronic and manual search, out of which 130 articles were selected after screening based on title and abstract. A total of 52 publications passed the second review phase after assessment for eligibility, from which 24 studies were excluded after full-text screening. Finally, a total of 28 studies were selected.Conclusions The survival rate of RBFPDs differed greatly depending on the type of metal alloy, adhesion system, and observation period assessed, e.g. the 10-year survival rate ranged from 18% to 88%. The wide range of survival rates of the RBFPDs reported indicates that though RBFPD is a reliable prosthesis, it is prone to failure if some processes are not completed.

[Application of single-retainer all-ceramic resin-bonded fixed partial denture in the maintenance of missing incisor gap after orthodontic treatment in adolescents: a case report].

This article reports a case of an orthodontic adolescent patient without a right inferior incisor. The right lower canine was used as the abutment. The single-retainer all-ceramic resin-bonded fixed partial denture was used to restore the complete dentition. Thus, the missing space was filled, and the function and aesthetics were restored.

Influence of the amount of tooth surface preparation on the shear bond strength of zirconia cantilever single-retainer resin-bonded fixed partial denture.

PURPOSE: Conventional resin-bonded fixed partial dentures (RBFPDs) are usually made with a two-retainer design. Unlike conventional RBFPDs, cantilever resin-bonded fixed partial dentures (Cantilever RBFPDs) are, for their part, made with a single-retainer design. The aim of this study was to compare the effect of tooth surface preparation on the bond strength of zirconia cantilever single-retainer RBFPDs. The objective is to evaluate the shear bond strength of these single-retainer RBFPDs bonded on 3 different amount of tooth surface preparation. MATERIALS AND METHODS: Thirty extracted bovine incisors were categorized to 3 groups (n=10), with different amounts of tooth surface preparations. Teeth were restored with single-retainer RBFPDs with different retainer surfaces: large retainer of 32 mm2; medium retainer of 22 mm2; no retainer and only a proximal connecting box of 12 mm2. All RBFPDs were made of zirconia and were bonded using an adhesive system without adhesive capacity. Shear forces were applied to these restorations until debonding. RESULTS: Mean shear bond strength values for the groups I, II, and II were 2.39±0.53 MPa, 3.13±0.69 MPa, and 5.40±0.96 MPa, respectively. Statistical analyses were performed using a one-way ANOVA test with Bonferroni post-hoc test, at a significance level of 0.001. Failure modes were observed and showed a 100% adhesive fracture. CONCLUSION: It can be concluded that the preparation of large tooth surface preparation might be irrelevant. For zirconia single-retainer RBFPD, only the preparation of a proximal connecting box seems to be a reliable and minimally invasive approach. The differences are statistically significant.

Effect of different surface treatments and retainer designs on the retention of posterior Pd-Ag porcelain-fused-to-metal resin-bonded fixed partial dentures.

The aim of this study was to investigate the adhesive property of palladium-silver alloy (Pd-Ag) and the simulated clinical performance of Pd-Ag porcelain-fused-to-metal (PFM), resin-bonded, fixed partial dentures (RBFPDs). A total of 40 Pd-Ag discs (diameter=5 mm) were prepared and divided into the following four groups (n=10): a) No sandblasting, used as a control; and b, 50 µm; c, 110 µm; and d, 250 µm aluminum oxide (Al2O3) particles, respectively. Another 50 discs were pre-sandblasted and divided into five groups (n=10) subjected to different treatments: e) Sandblasting, used as a control; f) silane; g) alloy primer; h) silica coating + silane and i) silica coating + alloy primer. All 90 discs were bonded to enamel with Panavia F 2.0 and then subjected to shear bond strength (SBS) testing. The fracture surfaces were examined by scanning electron microscopy. Next, 40 missing maxillary second premolar models were restored with one of the four following RBFPD designs (n=10): I) A premolar occlusal bar combined with molar double rests (MDR); II) both occlusal bars with a wing (OBB); III) a premolar occlusal bar combined with a molar dental band (MDB); and IV) two single rests adjacent to the edentulous space with a wing (SRB) used as a control. All specimens were aged with thermal cycling and mechanical loading. Subsequently, they were loaded until broken. The data were analyzed by one-way analysis of variance. Al2O3 (250 µm) abrasion provided the highest SBS (P<0.05). The alloy primer and silica + silane exhibited increased SBS. Furthermore, fracture analysis revealed that the failure mode varied among the different treatments. Whereas MDB exhibited the highest retention (P<0.05), that of OBB was greater than that of MDR (P<0.05), and the control exhibited the lowest retention. Abrasion with Al2O3 (250 µm) effectively increased the adhesive property of Pd-Ag. Additionally, treatment with the alloy primer and silica coating + silane was able to increase the adhesive property of abraded Pd-Ag. Under the present conditions, all three modified retainer types provided improved outcomes for Pd-Ag PFM RBFPDs compared with the control.

[Application of single-retainer all-ceramic resin-bonded fixed partial denture in replacing single anterior tooth].

Objective In this study, we aimed to evaluate the clinical effect of single-retainer all-ceramic resin-bonded fixed partial denture (RBFPD) on the single anterior tooth loss patients. Methods A total of 20 single-retainer all-ceramic RBFPD
were fabricated and evaluated in a two-year follow-up observation. The restorations were examined on the basis of the American Public Health Association (APHA) criteria. Results A total of 20 single-retainer all-ceramic RBFPD achieved class A evaluation after a six-month follow-up observation. One single-retainer all-ceramic RBFPD was classified as class B for secondary caries after a one-year follow-up observation. After a two-year follow-up observation, one single-retainer all-ceramic RBFPD was classified as class B because of secondary caries, and one single-retainer all-ceramic RBFPD was classified as class B because of fracture. Conclusion Single-retainer all-ceramic RBFPD is a promising and optional method in replacing single anterior tooth.

Veneered zirconia inlay-retained fixed dental prostheses: 10-Year results from a prospective clinical study.

OBJECTIVE: The purpose of this study was to evaluate the 10-year clinical performance of zirconia-based inlay-retained fixed dental prostheses (IRFDP). METHODS: For replacement of a molar in 27 patients, 30 IRFDP were luted by use of different cements, Panavia F (Kuraray Europe GmbH) or Multilink Automix (Ivoclar Vivadent GmbH), with use of inlay/inlay, inlay/full-crown, or inlay/partial-crown retainers for anchorage. Frameworks were milled from yttria-stabilized zirconia (IPS e.maxZirCAD; Ivoclar Vivadent GmbH) and fully veneered with pressable ceramic (IPS e.max ZirPress; Ivoclar Vivadent GmbH). Before luting, the IRFDP were silica-coated (Rocatec; 3M Espe) and silanized (Monobond S; Ivoclar Vivadent GmbH). Complications (for example, chipping or delamination of the veneering ceramic, debonding, secondary caries, endodontic treatment, and abutment tooth fracture) and failure were reported, by use of standardized report forms, 2 weeks, 6 months, and 1, 2, and 10 years after cementation. Statistical analysis included Kaplan-Meier survival and success (complication-free survival) and Cox regression analysis (α=0.05 for all). RESULTS: During the 10-year observation period, the complications most often observed were chipping of the veneer and debonding. Twenty-five restorations failed and one participant dropped out. Cumulative 10-year survival and success were 12.1% and 0%, respectively. The design of the retainer, use of a dental dam, choice of cement, and location in the dental arch had no statistically significant effect on the occurrence of complications. CONCLUSIONS: Use of fully veneered zirconia-based IRFDP with this technique cannot be recommended. CLINICAL SIGNIFICANCE: A large incidence of complications and poor survival were observed for fully veneered zirconia-based IRFDP, revealing an urgent need for further design improvements for this type of restoration. This, again, emphasizes the need for testing of new restoration designs in clinical trials before implementation in general dental practice.

A fixed movable resin-bonded fixed dental prosthesis--A 16 years clinical report.

PATIENTS: This report describes the case of a 48-year-old female patient who initially received a 4-unit fixed-fixed (FF) resin-bonded fixed dental prosthesis (RBFDP) for replacement of mandibular left second premolar and first molar. Twenty-one months later, debond of the RBFDP was found at one of retainers. A new fixed-movable RBFDPs with a modified non-rigid connector as well as increased resistance form features was placed and successfully retained at the 16-year clinical review. DISCUSSION: RBFDPs are a conservative tooth replacement option that requires minimum tooth preparation and retention by a resin cement to etched enamel. However debonding is the most frequently seen complication and has been attributed to the relative movement between abutment teeth during function that stress the bonding interface. This case report highlights the use of modified non-rigid connector which allows relative movement between abutment teeth and therefore a reduced stress on the bonding interface. CONCLUSION: It is proposed that the use of modified non-rigid connectors that allow independent movement between the abutment teeth during function was responsible for the long term clinical success of fixed-movable RBFDPs.

Replacement of missing lateral incisors with lithium disilicate glass-ceramic veneer-fixed dental prostheses: a clinical report.

KEY CLINICAL MESSAGE: This report describes the use of lithium disilicate glass-ceramic veneer-fixed dental prostheses in replacing congenitally missing maxillary lateral incisors. This kind of prosthesis has an advantage over a lingual-retainer resin-bonded fixed dental prosthesis in its capability of changing the color and shape of the abutment teeth. The prostheses provided an acceptable esthetics and comfort for the patient.

Single Tooth Replacement Using InCeram Resin Bonded Fixed Partial Denture: A Clinical Report.

This clinical report describes a treatment option for replacement of a missing mandibular anterior tooth using InCeram resin bonded fixed partial denture (RBFPD). The conventional approach for replacing mandibular incisors dictates the placement of either a conventional porcelain-fused-to-metal (PFM) bridge, Maryland bridge, or fiber-reinforced composite veneer bridge and several appearance-related disadvantages have been reported in the use of a prosthesis that incorporates a metal substructure. The InCeram bridge is a minimally invasive restoration and eliminates undesirable incisal graying frequently observed in metal RBFPDs. This method was successfully clinically applied to overcome shortcomings of other approaches that may require a minimal invasive technique to preserve lasting sound tooth structure.

Long-term clinical evaluation of 211 two-unit cantilevered resin-bonded fixed partial dentures.

OBJECTIVES: This retrospective study aims to evaluate the long term clinical performance of two-unit cantilevered resin-bonded fixed partial dentures (RBFPDs) relating to their retention, success and survival rate. MATERIALS AND METHODS: Prostheses that were placed at least four years previously were clinically reviewed to evaluate retention, success and survival rate. Additional information was also collected, including patient's gender, age and satisfaction on their prosthesis, operator's experience, prosthesis service life, root canal therapy if performed, abutment mobility, bone support, the presence of shim-stock contacts on the abutment or pontic in intercuspal position, and the presence of proximal axial contacts adjacent to the prosthesis. The date of any debonding with subsequent treatment was also recorded. RESULTS: A total of 211 two-unit RBFPDs were placed in 153 patients, with a mean service life of 113.2±33.5 months. Twenty-eight prostheses debonded, resulting in a retention rate of 86.7 percent, and another five teeth were extracted with the prostheses, resulting in a success rate of 84.4 percent. 90.0 percent prostheses were functioning (survival rate) by means of rebonding at the time of review. The location of the replaced tooth had a significant effect on the retention of RBFPDs with posterior RBFPDs lower than anterior (p=0.020). Kaplan-Meier analysis revealed 5-, 10- and 15-year cumulative probability of surviving was 0.97, 0.91 and 0.84, respectively. CONCLUSIONS: 211 two-unit RBFPDs were observed to have a success, retention and survival rate of 84.4, 86.7 and 90.0 percent, respectively, with a mean service life of 9.4 years. CLINICAL SIGNIFICANCE: Based on the clinical results, two-unit RBFPD are shown to be a durable prosthesis over the long term with high patient satisfaction. The posterior prostheses, particularly in the lower arch appeared to have a higher failure rate, and improved design features should be considered.