Dietary copper improves intestinal structural integrity in juvenile grass carp (Ctenopharyngodon idella) probably related to its increased intestinal antioxidant capacity and apical junction complex.

This research evaluated the effects of copper (Cu) on intestinal antioxidant capacity and apical junctional complex (AJC) in juvenile grass carp. A total of 1080 healthy juvenile grass carp (11.16 ± 0.01 g) were fed six diets including different dosages of Cu, namely 0, 2, 4, 6, 8 mg/kg (Cu citrate [CuCit] as Cu source) and 3 mg/kg (CuSO4·5H2O as Cu source). The trial lasted for 9 weeks. The findings revealed that dietary optimal Cu supplementation (2.2 to 4.1 mg/kg) promoted intestinal growth, including intestinal length, intestinal length index, intestinal weight, and intestinal somatic index (P < 0.05). Furthermore, optimal Cu boosted the intestinal mucosal barrier in juvenile grass carp. On the one hand, optimal Cu reduced diamine oxidase and D-lactate levels in serum (P < 0.05), reduced levels of the oxidative damage indicators malondialdehyde, reactive oxygen species (ROS), protein carbonyl, superoxide dismutase (P < 0.05), and catalase mRNA levels were elevated (P < 0.05), thus boosting intestinal antioxidant capacity, the binding protein Keap1a/1b/Nrf2 signaling pathway might be involved. Optimal Cu had no impact on glutathione peroxidase 1b (GPx1b) gene expression (P > 0.05). On the other hand, optimal Cu increased intestinal tight junction (TJ) proteins (except for claudin 15b) and adherens junction (AJ) proteins (E-cadherin, α-catenin, ß-catenin, nectin and afadin) mRNA levels (P < 0.05), which could be connected to the signaling pathway formed by the Ras homolog gene family, member A (RhoA), Rho-associated kinase (ROCK), and myosin light chain kinase (MLCK). Finally, based on serum indicator D-lactate and intestinal oxidative damage index (ROS), Cu requirement (CuCit as Cu source) for juvenile grass carp from initial weight to final weight (from 11 to 173 g) was determined to be 4.14 and 4.12 mg/kg diet, respectively. This work may provide a theoretical foundation for identifying putative Cu regulation pathways on fish intestinal health.

A Review of Subsidence Monitoring Techniques in Offshore Environments.

In view of the ever-increasing global energy demands and the imperative for sustainability in extraction methods, this article surveys subsidence monitoring systems applied to oil and gas fields located in offshore areas. Subsidence is an issue that can harm infrastructure, whether onshore or especially offshore, so it must be carefully monitored to ensure safety and prevent potential environmental damage. A comprehensive review of major monitoring technologies used offshore is still lacking; here, we address this gap by evaluating several techniques, including InSAR, GNSSs, hydrostatic leveling, and fiber optic cables, among others. Their accuracy, applicability, and limitations within offshore operations have also been assessed. Based on an extensive literature review of more than 60 published papers and technical reports, we have found that no single method works best for all settings; instead, a combination of different monitoring approaches is more likely to provide a reliable subsidence assessment. We also present selected case histories to document the results achieved using integrated monitoring studies. With the emerging offshore energy industry, combining GNSSs, InSAR, and other subsidence monitoring technologies offers a pathway to achieving precision in the assessment of offshore infrastructural stability, thus underpinning the sustainability and safety of offshore oil and gas operations. Reliable and comprehensive subsidence monitoring systems are essential for safety, to protect the environment, and ensure the sustainable exploitation of hydrocarbon resources.

Advancements in integrated robotic sensing: A European perspective.

Robotic Non-destructive Testing and Sensing stands at the forefront of technological innovation, offering capabilities in assessing structural integrity, safety, and material quality across diverse industries. This comprehensive review article provides a detailed exploration of the field, focusing on the substantial contributions of European researchers and institutions. The need for non-destructive testing has been a constant in industries that rely on structural integrity, including aerospace, manufacturing, energy, construction, and healthcare. Traditional testing methods, such as radiography, ultrasonic testing, magnetic particle testing, and dye penetrant testing, have been integral for quality control and safety assurance. However, the robotisation of such methods has marked a profound shift, enabling precise, fast, efficient, and repeatable testing while minimising human exposure to hazardous environments. European researchers and institutions have played an instrumental role in driving the evolution of integrated robotic sensing. The historical perspective of the field reveals the pioneering spirit of Europe, as collaborative initiatives led to the development of robotic platforms equipped with advanced sensors and testing techniques. A critical aspect of the European impact on robotic inspection applications lies in developing advanced sensors, innovative robotic platforms, novel robotic path-planning and control approaches and data collection and visualisation tools. These developments continue to influence the global landscape of robotic sensing. European researchers remain at the forefront of current trends and innovations as the field continues to evolve. This review article will delve into these recent advancements, highlighting Europe's pivotal role in pushing the boundaries of technology and application. The implications and applications of robotic sensing reverberate across multiple sectors worldwide. From inspecting critical aerospace components to ensuring the quality of manufactured goods, these technologies underpin safety and quality standards.

Fine-tuning of liposome integrity for differentiated transcytosis and enhanced antitumor efficacy.

Transcytosis-inducing nanomedicines have been developed to improve tumor extravasation. However, the fate during transcytosis across multicell layers and the structural integrity of the nanomedicines before reaching tumor cells could impact antitumor therapy. Here, a BAY 87-2243 (a hypoxia-inducible factor-1 inhibitor)-loaded liposomal system (HA-P-LBAY) modified by low molecular weight protamine (LMWP) and crosslinked by hyaluronic acid (HA) was constructed. This system could accomplish differentiate cellular transport in endothelial and tumor cells by fine-tuning its structural integrity, i.e. transcytosis across the endothelial cells while preserving structural integrity, facilitating subsequent retention and drug release within tumor cells via degradation-induced aggregation. In vitro cellular uptake and transwell studies demonstrated that HA-P-LBAY were internalized by endothelial cells (bEnd.3) via an active, caveolin and heparin sulfate proteoglycan (HSPG)-mediated endocytosis, and subsequently achieved transcytosis mainly through the ER/Golgi pathway. Moreover, the fluorescence resonance energy transfer (FRET) study showed that HA-crosslinking maintained higher integrity of HA-P-LBAY after transcytosis, more efficiently than electrostatic coating of HA (HA/P-LBAY). In addition, more HA-P-LBAY was retained in tumor cells (4T1) compared to HA/P-LBAY corresponding to its enhanced in vitro cytotoxicity. This may be attributed to better integrity of HA-P-LBAY post endothelial transcytosis and more degradation of HA in tumor cells, leading to more liposome aggregation and inhibition of their transcytosis, which was inferred by both TEM images and the HAase responsiveness assay proved by FRET. In vivo, HA-P-LBAY exhibited more potency in tumor suppression than the other formulations in both low and high permeability tumor models. This highlighted that fine-tuning of structural integrity of nanocarriers played a key role no matter whether the transcytosis of nanocarriers contributed to cellular transport. Collectively, this study provides a promising strategy for antitumor therapies by fine-tuning liposome integrity to achieve active trans-endothelial transport with structural integrity and selective aggregation for prolonged tumor retention.

Empowering Rehabilitation: Design and Structural Analysis of a Low-Cost 3D-Printed Smart Orthosis.

Three-dimensional (3D) printing of polymer materials encompasses a wide range of applications and innovations. Polymer-based 3D printing, also known as additive manufacturing, has gained significant attention due to its versatility, cost-effectiveness, and potential to revolutionize various industries. The current paper focuses on obtaining a durable low-cost rehabilitation knee orthosis. Researchers propose that the entire structure should be obtained using modern equipment within the additive manufacturing domain-3D printing. The researchers focus on determining, through a 3D analysis of the entire 3D model assembly, which parts present a high degree of stress when a kinematic simulation is developed. The entire 3D model of the orthosis starts based on the result obtained from a 3D scanning of the knee joint of a patient, providing a precise fixation, and allowing for direct personalization. Based on the results and identification of the critical parts, there will be used different materials and a combination of 3D printing strategies to validate the physical model of the entire orthosis. For the manufacturing process, the researchers use two types of low-cost fused filament fabrication (FFF), which are easy to find on the worldwide market. The motivation for manufacturing the entire assembly using 3D printing techniques is the short time in which complex shapes can be obtained, which is relevant for the present study. The main purpose of the present research is to advance orthotic technology by developing an innovative knee brace made of 3D-printed polymers that are designed to be lightweight, easy-to-use, and provide comfort and functionality to patients during the rehabilitation process.

Comparison of the structural integrity and quality of corneal endothelium stored in organ culture storage medium versus Eusol-C.

In this experimental study, we compared the structural integrity and cell quality of corneal endothelium stored in organ culture medium (OCS) and Eusol-C. The experiment included rabbit and human cornea experiments in vitro. Thirty rabbit corneas and thirty-two human corneas were collected and divided into two groups. All right corneas were allocated in experiment group and left corneas were placed in control group. The corneas in experimental group were stored in OCS at 34 °C, and the corneas in control group were stored in Eusol-C at 4 °C for 7, 14, 21, 28, and 35 days, respectively. Endothelial cell morphology, cell count, and trypan blue staining for viability were assessed before storage (Day 0) and at days 7, 14, 21, 28 and 35. The structural integrity of human corneal endothelial cell was analyzed using immunohistochemistry. The samples of storage solution for microbial culture were collected on the third day and at the end of storage. The results show that no bacterial and fungal infections were found in both groups. After 14 days of storage, the morphology of endothelial cell was better in the experimental group than in the control group. The endothelial cell stored in OCS were better than those stored in Eusol-C at the end of storage times, except human cornea 14 days storage group. The ZO-1 protein staining showed the typical polygonal morphology of endothelial cell stored in the OCS. Corneal endothelial cells stored in the OCS had better quality up to 28 days. It can be applied to Chinese eye banks as a method of corneal preservation.

CTNNAL1 promotes the structural integrity of bronchial epithelial cells through the RhoA/ROCK1 pathway.

Adhesion molecules play critical roles in maintaining the structural integrity of the airway epithelium in airways under stress. Previously, we reported that catenin alpha-like 1 (CTNNAL1) is downregulated in an asthma animal model and upregulated at the edge of human bronchial epithelial cells (HBECs) after ozone stress. In this work, we explore the potential role of CTNNAL1 in the structural adhesion of HBECs and its possible mechanism. We construct a CTNNAL1 ‒/‒ mouse model with CTNNAL1-RNAi recombinant adeno-associated virus (AAV) in the lung and a CTNNAL1-silencing cell line stably transfected with CTNNAL1-siRNA recombinant plasmids. Hematoxylin and eosin (HE) staining reveals that CTNNAL1 ‒/‒ mice have denuded epithelial cells and structural damage to the airway. Silencing of CTNNAL1 in HBECs inhibits cell proliferation and weakens extracellular matrix adhesion and intercellular adhesion, possibly through the action of the cytoskeleton. We also find that the expressions of the structural adhesion-related molecules E-cadherin, integrin ß1, and integrin ß4 are significantly decreased in ozone-treated cells than in vector control cells. In addition, our results show that the expression levels of RhoA/ROCK1 are decreased after CTNNAL1 silencing. Treatment with Y27632, a ROCK inhibitor, abolished the expressions of adhesion molecules induced by ozone in CTNNAL1-overexpressing HBECs. Overall, the findings of the present study suggest that CTNNAL1 plays a critical role in maintaining the structural integrity of the airway epithelium under ozone challenge, and is associated with epithelial cytoskeleton dynamics and the expressions of adhesion-related molecules via the RhoA/ROCK1 pathway.

Unexpected increase in structural integrity caused by thermally induced dwarfism in large benthic foraminifera.

Climate change is predicted to negatively impact calcification and change the structural integrity of biogenic carbonates, influencing their protective function. We assess the impacts of warming on the morphology and crystallography of Amphistegina lobifera, an abundant benthic foraminifera species in shallow environments. Specimens from a thermally disturbed field area, mimicking future warming, are about 50% smaller compared with a control location. Differences in the position of the ν1 Raman mode of shells between the sites, which serves as a proxy for Mg content and calcification temperature, indicate that calcification is negatively impacted when temperatures are below the thermal range facilitating calcification. To test the impact of thermal stress on the Young's modulus of calcite which contributes to structural integrity, we quantify elasticity changes in large benthic foraminifera by applying atomic force microscopy to a different genus, Operculina ammonoides, cultured under optimal and high temperatures. Building on these observations of size and the sensitivity analysis for temperature-induced change in elasticity, we used finite element analysis to show that structural integrity is increased with reduced size and is largely insensitive to calcite elasticity. Our results indicate that warming-induced dwarfism creates shells that are more resistant to fracture because they are smaller.

Culture of Human Fetal Membranes in a Two Independent Compartment Model: An Ex Vivo Approach.

During pregnancy, the fetal membranes composed of the amnion and chorodecidua constitute a selective barrier separating two distinct environments, maternal and fetal. These tissues have the function of delimiting the amniotic cavity. Their histological complexity gives them physical, mechanical, and immunological properties to protect the fetus. Although the study of the amnion, chorion, and decidua separately provides knowledge about the functions of the fetal membranes, the protocol we describe in this chapter has the advantage of maintaining the biological and functional complexity of these tissues. In addition, this experimental model allows the researcher to recreate various pathological scenarios because this model allows for differential stimulation of the amnion or choriodecidua.

Surface Composites Synthesized through the Incorporation of Atomic Layer Deposited AlOx into Nanoporous Fuzzy Tungsten.

The incorporation of energetic helium gaseous species into materials such as tungsten (W) imparts intrinsic surface fragility, yielding fuzzy tungsten. To enhance the robustness of the surface layers, aluminum oxide (AlOx) was deposited by atomic layer deposition into the fuzzy W. The conformally deposited ceramic yields a new class of surface composites. Structural characterization of the fuzzy W-AlOx composites through nanoindentation testing indicated enhanced indentation modulus (Eind) and hardness (Hind) and was modeled through various rules of mixtures approaches. The distribution of AlOx in fuzzy W was explored and a systematic study of the extent of incorporation of the AlOx into the fuzzy W was carried out. The synthesized composites may be utilized for improved structural characteristics, e.g., in reducing crack initiation and fracture.

Structural health monitoring of jacket-type support structures in offshore wind turbines: A comprehensive dataset for bolt loosening detection through vibrational analysis.

This dataset provides a comprehensive collection of vibrational data for the purpose of structural health monitoring, particularly focusing on the detection of bolt loosening in offshore wind turbine jacket foundations. The data set comprises 780 comma-separated values (CSV) files, each corresponding to specific experimental conditions, including various structural states of the wind turbine's support structure. These states are systematically varied considering three main aspects: the amplitude of a white noise (WN) signal, the type of bolt damage, and the level at which damage has occurred. The data were meticulously collected using eight triaxial accelerometers (PCB R Piezotronic model 356A17), strategically placed at different locations on a scaled-down replica of an offshore jacket-type wind turbine. This setup facilitated the acquisition of detailed vibrational data through a National Instruments' data acquisition (DAQ) system, comprising six input modules (NI 9234 model) housed in a chassis (cDAQ model). The white noise signal, simulating wind disturbance at the nacelle, was produced by a modal shaker and varied in three amplitudes (0.5, 1, and 2), directly proportional to the induced vibration in the wind turbine. The dataset uniquely captures the vibrational behaviour under different scenarios of bolt loosening in the turbine's foundation. The conditions include a healthy state (bolts tightened to 12 Nm) and various degrees of loosening (bolts loosened to 9 Nm, 6 Nm, and completely absent), examined at four distinct levels of the turbine's base structure. This granular approach offers a nuanced view of how varying degrees of bolt loosening impact the vibrational characteristics of the structure. The value of this dataset lies in its potential for wide-ranging applications in the field of structural health monitoring. Researchers and engineers can leverage this data for developing and testing new methodologies for early damage detection and progressive damage assessment in offshore wind turbines. The dataset's comprehensive coverage of damage scenarios makes it a valuable resource for the validation and enhancement of existing damage detection algorithms. Furthermore, the dataset can serve as a benchmark for comparing the efficacy of different vibrational analysis techniques in the context of wind turbine maintenance and safety. Its application is not only limited to wind turbines but can extend to other structures where bolt integrity is critical for operational safety. This dataset represents a significant contribution to the field of structural health monitoring, providing a detailed and practical resource for enhancing the reliability and safety of offshore wind turbines and similar structures.

Application of Neural Network Models with Ultra-Small Samples to Optimize the Ultrasonic Consolidation Parameters for 'PEI Adherend/Prepreg (CF-PEI Fabric)/PEI Adherend' Lap Joints.

The aim of this study was to optimize the ultrasonic consolidation (USC) parameters for 'PEI adherend/Prepreg (CF-PEI fabric)/PEI adherend' lap joints. For this purpose, artificial neural network (ANN) simulation was carried out. Two ANNs were trained using an ultra-small data sample, which did not provide acceptable predictive accuracy for the applied simulation methods. To solve this issue, it was proposed to artificially increase the learning sample by including additional data synthesized according to the knowledge and experience of experts. As a result, a relationship between the USC parameters and the functional characteristics of the lap joints was determined. The results of ANN simulation were successfully verified; the developed USC procedures were able to form a laminate with an even regular structure characterized by a minimum number of discontinuities and minimal damage to the consolidated components.

Enhancing Reliability and Safety in Industrial Applications: Assessing the Applicability of Energy b-Value to Composites.

This study investigates the fracture behavior of glass fiber-reinforced plastic (GFRP) under various loading conditions using acoustic emission (AE) testing. Using fracture tests and time series analysis of AE signals, parameters such as b-value, improved b-value (Ib-value), and energy b-value (be-value) were examined to understand crack initiation, growth, and structural failure. The stress-strain curve revealed distinct responses during tensile and step loading, and time series analysis highlighted variations in amplitude, AE energy, and Kaiser and Felicity effects. Under tensile loading, the Ib-value exhibited a linear decrease, while step loading introduced complexities, including the Felicity effect. The be-value, incorporating energy considerations, fluctuated, providing insights into micro-cracks and macro-cracks. Statistical analysis demonstrated a consistent decrease in the be-value, emphasizing its potential for long-term monitoring. This study provides a comprehensive technique for assessing composite material fracture behavior, enhancing understanding for critical applications in hydrogen storage vessels and pressure pipes as well as advancing reliability and safety in industrial sectors.

Enhancing Structural Health Monitoring with Acoustic Emission Sensors: A Case Study on Composites under Cyclic Loading.

This study conducts an in-depth analysis of the failure behavior of woven GFRP under cyclic loading, leveraging AE sensors for monitoring damage progression. Utilizing destructive testing and AE methods, we observed the GFRP's response to varied stress conditions. Key findings include identifying distinct failure modes of GFRP and the effectiveness of AE sensors in detecting broadband frequency signals indicative of crack initiation and growth. Notably, the Felicity effect was observed in AE signal patterns, marking a significant characteristic of composite materials. This study introduces the Ibe-value, based on statistical parameters, to effectively track crack development from inception to growth. The Ibe-values potential for assessing structural integrity in composite materials is highlighted, with a particular focus on its variation with propagation distance and frequency-dependent attenuation. Our research reveals challenges in measuring different damage modes across frequency ranges and distances. The effectiveness of Ibe-values, combined with the challenges of propagation distance, underscores the need for further investigation. Future research aims to refine assessment metrics and improve crack evaluation methods in composite materials, contributing to the field's advancement.

Si-Based High-Entropy Anode for Lithium-Ion Batteries.

Up to now, only a small portion of Si has been utilized in the anode for commercial lithium-ion batteries (LIBs) despite its high energy density. The main challenge of using micron-sized Si anode is the particle crack and pulverization due to the volume expansion during cycling. This work proposes a type of Si-based high-entropy alloy (HEA) materials with high structural stability for the LIB anode. Micron-sized HEA-Si anode can deliver a capacity of 971 mAhg-1 and retains 93.5% of its capacity after 100 cycles. In contrast, the silicon-germanium anode only retains 15% of its capacity after 20 cycles. This study has discovered that including HEA elements in Si-based anode can decrease its anisotropic stress and consequently enhance ductility at discharged state. By utilizing in situ X-ray diffraction and transmission electron microscopy analyses, a high-entropy transition metal doped Lix (Si/Ge) phase is found at lithiated anode, which returns to the pristine HEA phase after delithiation. The reversible lithiation and delithiation process between the HEA phases leads to intrinsic stability during cycling. These findings suggest that incorporating high-entropy modification is a promising approach in designing anode materials toward high-energy density LIBs.

Three-phase Enriched Environment Improves Post-stroke Gait Dysfunction via Facilitating Neuronal Plasticity in the Bilateral Sensorimotor Cortex: A Multimodal MRI/PET Analysis in Rats.

The three-phase Enriched Environment (EE) paradigm has been shown to promote post-stroke functional improvement, but the neuronal mechanisms are still unclear. In this study, we applied a multimodal neuroimaging protocol combining magnetic resonance imaging (MRI) and positron emission tomography (PET) to examine the effects of post-ischemic EE treatment on structural and functional neuroplasticity in the bilateral sensorimotor cortex. Rats were subjected to permanent middle cerebral artery occlusion. The motor function of the rats was examined using the DigiGait test. MRI was applied to investigate the EE-induced structural modifications of the bilateral sensorimotor cortex. [18F]-fluorodeoxyglucose PET was used to detect glucose metabolism. Blood oxygen level-dependent (BOLD)-functional MRI (fMRI) was used to identify the regional brain activity and functional connectivity (FC). In addition, the expression of neuroplasticity-related signaling pathways including neurotrophic factors (BDNF/CREB), axonal guidance proteins (Robo1/Slit2), and axonal growth-inhibitory proteins (NogoA/NgR) as well as downstream proteins (RhoA/ROCK) in the bilateral sensorimotor cortex were measured by Western blots. Our results showed the three-phase EE improved the walking ability. Structural T2 mapping imaging and diffusion tensor imaging demonstrated that EE benefited structure integrity in the bilateral sensorimotor cortex. PET-MRI fused images showed improved glucose metabolism in the corresponding regions after EE intervention. Specifically, the BOLD-based amplitude of low-frequency fluctuations showed that EE increased spontaneous activity in the bilateral motor cortex and ipsilateral sensory cortex. In addition, FC results showed increased sensorimotor connectivity in the ipsilateral hemisphere and increased interhemispheric motor cortical connectivity and motor cortical-thalamic connectivity following EE intervention. In addition, a strong correlation was found between increased functional connectivity and improved motor performance of limbs. Specifically, EE regulated the expression of neuroplasticity-related signaling, involving BDNF/CREB, Slit2/Robo1, as well as the axonal growth-inhibitory pathways Nogo-A/Nogo receptor and RhoA/ROCK in the bilateral sensorimotor cortex. Our results indicated that the three-phase enriched environment paradigm enhances neuronal plasticity of the bilateral sensorimotor cortex and consequently ameliorates post-stroke gait deficits. These findings might provide some new clues for the development of EE and thus facilitate the clinical translation of EE.

Composites in Aerospace and Mechanical Engineering.

An important step towards improving performance while reducing weight and maintenance needs is the integration of composite materials into mechanical and aerospace engineering. This subject explores the many aspects of composite application, from basic material characterization to state-of-the-art advances in manufacturing and design processes. The major goal is to present the most recent developments in composite science and technology while highlighting their critical significance in the industrial sector-most notably in the wind energy, automotive, aerospace, and marine domains. The foundation of this investigation is material characterization, which offers insights into the mechanical, chemical, and physical characteristics that determine composite performance. The papers in this collection discuss the difficulties of gaining an in-depth understanding of composites, which is necessary to maximize their overall performance and design. The collection of articles within this topic addresses the challenges of achieving a profound understanding of composites, which is essential for optimizing design and overall functionality. This includes the application of complicated material modeling together with cutting-edge simulation tools that integrate multiscale methods and multiphysics, the creation of novel characterization techniques, and the integration of nanotechnology and additive manufacturing. This topic offers a detailed overview of the current state and future directions of composite research, covering experimental studies, theoretical evaluations, and numerical simulations. This subject provides a platform for interdisciplinary cooperation and creativity in everything from the processing and testing of innovative composite structures to the inspection and repair procedures. In order to support the development of more effective, durable, and sustainable materials for the mechanical and aerospace engineering industries, we seek to promote a greater understanding of composites.

An emerging role of arecoline on growth performance, intestinal digestion and absorption capacities and intestinal structural integrity of adult grass carp (Ctenopharyngodon idella).

Arecoline is an alkaloid with important pharmacological effects in the plant areca nut, which has been demonstrated to be an agonist of muscarinic receptors (M receptor). This study explored the influences of dietary arecoline on growth performance, intestinal digestion and absorption abilities, antioxidant capacity, and the apical junction complex (AJC) of adult grass carp (Ctenopharyngodon idella). Adult grass carp (608 to 1512 g) were fed at 6 graded levels of dietary arecoline (0, 0.5, 1.0, 1.5, 2.0, and 2.5 mg/kg diet) for 9 weeks. The results suggested that appropriate dietary supplementation of arecoline (1.0 mg/kg) increased growth parameters and intestinal growth in adult grass carp (P < 0.05), enhanced digestion and absorption capacities (P < 0.05), up-regulated muscarinic receptor 3 (M3) mRNA level (P < 0.05), increased the content of neuropeptide fish substance P (P < 0.05), improved antioxidant capacity by activating the Keap1a/Nrf2 signaling pathway (P < 0.05), reduced intestinal mucosal permeability (P < 0.05), and increased mRNA levels of tight junction (TJ) and adherent junction AJ-related proteins in fish by inhibiting the RhoA/ROCK signaling pathway (RhoA/ROCK/MLCK/NMII) (P < 0.05). In addition, the appropriate arecoline supplementation for adult grass carp was determined to be 1.20, 1.21, 1.07, and 1.19 mg/kg based on percentage weight gain, lipase activity, serum diamine oxidase, and protein carbonyl, respectively. Overall, to the best of our knowledge, we investigated for the first time the effects and possible mechanisms of dietary arecoline on intestinal digestive and absorptive capacities and structural integrity in fish and evaluated the appropriate level of supplementation.

Dry beans (Phaseolus vulgaris L.) modulate the kinetics of lipid digestion in vitro: Impact of the bean matrix and processing.

The lipid-lowering effect of dry beans and their impact on lipid and cholesterol metabolism have been established. This study investigates the underlying mechanisms of this effect and explore how the structural integrity of processed beans influences their ability to modulate lipolysis using the INFOGEST static in vitro digestion model. Dietary fiber (DF) fractions were found to decrease lipolysis by increasing the digesta viscosity, leading to depletion-flocculation and/or coalescence of lipid droplets. Bean flours exhibited a more pronounced reduction in lipolysis compared to DF. Furthermore, different levels of bean structural integrity showed varying effects on modulating lipolysis, with medium-sized bean particles demonstrating a stronger reduction. Hydrothermal treatment compromised the ability of beans to modulate lipid digestion, while hydrostatic-pressure treatment (600 MPa/5min) enhanced the effect. These findings highlight that the lipid-lowering effect of beans is not solely attributed to DF but also to the overall bean matrix, which can be manipulated through processing techniques.

Study Protocol of a Prospective, Monocentric, Single-Arm Study Investigating the Safety and Efficacy of Local Ablation of Symptomatic Uterine Fibroids with US-Guided High-Intensity Focused Ultrasound (HIFU).

Uterine fibroids are the most common benign tumors of the uterus. Approximately 20-50% of women with myomas experience a variety of symptoms such as vaginal bleeding, abdominal pain, pelvic pain and pressure, and urological problems, possibly interfering with fertility and pregnancy. Although surgery remains the standard treatment option for fibroids, non-invasive therapeutic options, such as high-intensity focused ultrasound (HIFU), have emerged over the last dec ade. During HIFU, ultrasound is focused on the target tissue causing coagulation necrosis. HIFU has, meanwhile, become an established method for treating uterine fibroids in many countries. Clinical data have shown that it effectively alleviates fibroid-related symptoms and reduces fibroid size with a very low rate of side effects. However, there is a lack of data on how this treatment affects laboratory parameters and structural features of uterine tissue. As our center is the only one in German-speaking countries where ultrasound-guided HIFU technology is currently established, the aim of this prospective, monocentric, single-arm trial is not only to evaluate the safety and efficacy of local US-guided HIFU in symptomatic uterine fibroid patients according to GCP standards but also to explore its effects on blood parameters and the structural integrity of uterine tissue using elastographic methods.