Hydrogel microsphere stem cell encapsulation enhances cardiomyocyte differentiation and functionality in scalable suspension system.

A reliable suspension-based platform for scaling engineered cardiac tissue (ECT) production from human induced pluripotent stem cells (hiPSCs) is crucial for regenerative therapies. Here, we compared the production and functionality of ECTs formed using our scaffold-based, engineered tissue microsphere differentiation approach with those formed using the prevalent scaffold-free aggregate platform. We utilized a microfluidic system for the rapid (1 million cells/min), high density (30, 40, 60 million cells/ml) encapsulation of hiPSCs within PEG-fibrinogen hydrogel microspheres. HiPSC-laden microspheres and aggregates underwent suspension-based cardiac differentiation in chemically defined media. In comparison to aggregates, microspheres maintained consistent size and shape initially, over time, and within and between batches. Initial size and shape coefficients of variation for microspheres were eight and three times lower, respectively, compared to aggregates. On day 10, microsphere cardiomyocyte (CM) content was 27 % higher and the number of CMs per initial hiPSC was 250 % higher than in aggregates. Contraction and relaxation velocities of microspheres were four and nine times higher than those of aggregates, respectively. Microsphere contractile functionality also improved with culture time, whereas aggregate functionality remained unchanged. Additionally, microspheres displayed improved ß-adrenergic signaling responsiveness and uniform calcium transient propagation. Transcriptomic analysis revealed that while both microspheres and aggregates demonstrated similar gene regulation patterns associated with cardiomyocyte differentiation, heart development, cardiac muscle contraction, and sarcomere organization, the microspheres exhibited more pronounced transcriptional changes over time. Taken together, these results highlight the capability of the microsphere platform for scaling up biomanufacturing of ECTs in a suspension-based culture platform.

Enhanced production of recombinant coxsackievirus A16 using a serum-free HEK293A suspension culture system for bivalent enterovirus vaccine development.

Coxsackievirus A16 (CVA16) is one of the primary pathogens that causes hand, foot, and mouth disease (HFMD) in young children. In previous studies, CVA16 vaccine development has encountered several challenges, such as inefficient replication of the CVA16 virus in present culture systems, the induction of only mild neutralizing antibody titers, and neutralizing antibodies induced by certain vaccine candidates that are unable to protect against CVA16 viral challenge. In this study, we constructed a DNA-launched CVA16 infectious clone (CVA16ic) based on the genomic sequence of the CVA16 N5079 strain to minimize interference from viral quasispecies. The biochemical properties of this CVA16ic strain were similar to those of its parental strain. Serum-free HEK293A suspension cells, which produced higher virus titers than Vero cells, were demonstrated to improve CVA16 production yields. In addition, our study showed that inactivated EV-A71 antigens could enhance the immunogenicity of inactivated CVA16 mature/full particles (F-particles), suggesting that a bivalent CVA16 and EV-A71 vaccine may be an effective strategy for CVA16 vaccine development. These findings are expected to provide novel strategies and accelerate the development of bivalent HFMD vaccines.

Induction and Suspension Culture of Panax japonicus Callus Tissue for the Production of Secondary Metabolic Active Substances.

Using Panax japonicus as research material, callus induction and culture were carried out, and high-yielding cell lines were screened to establish a suspension culture system that promotes callus growth and the accumulation of the "total saponins" (total content of triterpenoid glycosides or ginsenosides). Using the root as an explant, the medium for callus induction and proliferation was optimized by adjusting culture conditions (initial inoculation amount, carbon source, shaking speed, hormone concentration, culture time) and a high-yielding cell line with efficient proliferation and high total saponins content was screened out. The conditions of suspension culture were refined to find out the most suitable conditions for the suspension culture of callus, and finally, the suspension culture system was established. We found that the lowest (5%) contamination rate was achieved by disinfecting the fresh roots with 75% alcohol for 60 s, followed by soaking in 10% NaClO for 15 min. The highest induction rate (88.17%) of callus was obtained using the medium MS + 16.11 µmol·L-1 NAA + 13.32 µmol·L-1 6-BA + 30.0 g·L-1 sucrose + 7.5 g·L-1 agar. The callus was loose when the callus subcultured on the proliferation medium (MS + 5.37 µmol·L-1 NAA + 13.32 µmol·L-1 6-BA + 30.0 g·L-1 sucrose + 3.8 g·L-1 gellan gum) for 21 days. The callus growth was cultured in a liquid growth medium (MS + 5.37 µmol·L-1 NAA + 13.32 µmol·L-1 6-BA + 30.0 g·L-1 sucrose) with an initial inoculation amount of 40 g·L-1, a shaking speed of 110 r/min and darkness. Cell growth was fastest with a culture period of 21 days. We replaced the growth medium with the production medium (MS + 5.37 µmol·L-1 NAA + 13.32 µmol·L-1 6-BA + 30.0 g·L-1 glucose) for maximum accumulation of total saponins. [Conclusion] A callus induction and suspension culture system for the root of P. japonicus was established. In this way, we can promote the accumulation of total saponins in callus cells and provide a basis for large-scale cell culture and industrial production of medicinal total saponins.

Microcarrier-based clinical-grade manufacturing of therapeutic Wharton's jelly mesenchymal stromal cells.

Due to their immunomodulatory and anti-inflammatory properties, tissue repair capabilities and regenerative potential, Wharton's jelly mesenchymal stem/stromal cells (WJMSCs) have been widely investigated as potential treatment for diverse clinical indications. WJMSCs have been found to be well-tolerated and safe, positioning them as a promising candidate for cellular therapy. To address the commercial need for manufacturing WJMSCs for clinical applications, the production scale should be capable of generating large quantities of cells that retain their expected identity, purity and potency. This study aimed to establish a current Good Manufacturing Practice (cGMP) compliant robust and scalable expansion process representing a critical step towards a cGMP-compliant large-scale production platform for WJMSC-based clinical applications. Using our in-house cGMP-manufactured WJMSCs, which are currently being tested in a Phase Ib clinical trial (NCT03158896) using two-dimensional (2D) planar systems, we optimized various culture parameters including type of microcarrier, seeding density, agitation and culture feed regime in a 3D microcarrier-based culture system in spinner flasks. The results showed that cell adhesion was potentiated under intermittent stirring (3 min of agitation at 25 rpm followed by a period of non-agitation for 30 min), with reduced supplementation (0.05%) during the initial 8 h of cultivation with an initial cell concentration of 0.45 × 105 cells/mL. Microcarrier-based WJMSC expansion in spinner flasks achieved greater cell densities of 1.67 × 106 cells/mL with a maximum of 37-fold expansion, yielding ∼84 × 106 cells after 6 days of culture with a 95% harvest efficiency. Additionally, post 3D expansion, WJMSCs maintained their phenotypic characteristics, differentiation potential, normal karyotype, functional properties and sterility in the culture systems evaluated. This cGMP-compliant expansion process described herein demonstrates a successful transition of an established 2D planar culture process of clinical grade WJMSCs to 3D microcarrier-based suspension process generating higher cell yields, is cost-effective and represents an important step toward fulfilling the commercial demand of clinical grade mesenchymal stromal cells.

The involvement of cyclotides in the heavy metal tolerance of Viola spp.

The Violaceae family is rich in metal-tolerant species and species producing cyclic peptides (cyclotides) that are linked to the resistance to biotic factors. Plants that inhabit areas polluted with heavy metals have developed various mechanisms of tolerance. To test the role of cyclotides in protection against abiotic factors, including heavy metals, cell suspension cultures of Viola species/genotypes (V. lutea ssp. westfalica, V. tricolor, V. arvensis, and V. uliginosa), representing different levels of tolerance to heavy metals (from the most tolerant-MET to the least tolerant populations/species-NMET), were used. The relative abundances of the cyclotides in the control, untreated cell suspensions of all the selected species/genotypes, and cells treated with Zn or Pb (200 µM or 2000 µM) for 24 h or 72 h were determined via MALDI-MS. Transmission electron microscopy with X-ray microanalysis was used to detect putative co-localization of the cyclotides with Zn or Pb in the cells of V. tricolor treated with the highest concentration of heavy metals for 72 h. Cyclotide biosynthesis was dependent on the type of heavy metal and its concentration, time of treatment, plant species, and population type (MET vs. NMET). It was positively correlated with the level of tolerance of particular Viola species. The increased production of cyclotides was observed in the cells of metallophyte species, mostly in Zn-treated cells. The nonmetallophyte-V. uliginosa presented a decrease in the production of cyclotides independent of the dose and duration of the metal treatment. Cyclotides co-localized with Pb more evidently than with Zn, suggesting that cyclotides have heavy metal affinity. V. lutea ssp. westfalica transcriptome mining yielded 100 cyclotide sequences, 16 known and 84 novel named viwe 1-84. These findings support the hypothesis that cyclotides are involved in certain mechanisms of plant tolerance to heavy metals.

In vitro mutagenesis using habituation and PBR autotrophy based indirect somatic embryogenesis (ISE) system in Kinnow mandarin.

Solid mutant induction using specialized habituation and PBR (Plant bio-regulator) autotrophy-mediated suspension-based ISE system was the prime aim of present investigation. Based on survival of cell clumps after mutagen treatment, the probit analysis was calculated. The result revealed LD50 at 54.31 Gy in gamma, while for EMS (ethyl methanesulfonate), it was 0.1% for 3 h and 0.5% for 1 h. Based on embryogenesis efficiency, a dose rate of 100 Gy and 0.1% EMS for a 3-h exposure were selected for regeneration. As compared to control, significant decrease in the embryogenesis efficiency was recorded at 100 Gy (85.92%) with similar reduction trends in embryo production (79.49%), germination (13.43%), conversion (2.48%), establishment (15.78%) and acclimatization (60.92%). The growth-related parameters such as root and shoot length and number of leaves/regenerant were also significantly reduced to 67.29%, 30.19% and 5.03%, respectively, in the regenerated plants after gamma irradiation as compared to control. In the EMS treatment, at the dose rate of 0.1% for 3-h, the embryogenesis efficiency was reduced to 43.67% with similar diminution trends in embryo production (59.49%), germination (8.95%), conversion (1.94%), establishment (4.37%) and acclimatization (29.9%). The growth-related parameters in the EMS treatment, decreased to 91.00% (root length), 71.34% (shoot length) and 35.03% (no. of leaves). The molecular marker based varied amplifications confirmed the occurrence of mutations in both gamma and EMS induced M1 regenerants. The study highlights the alternative high frequency in vitro mutagenesis protocol for induction of solid mutants in Kinnow mandarin and related citrus species.

Investigation of miniature goat cheese produced from Cynara scolymus L. pistil cell suspension culture extracts elicited with melatonin and salicylic acid.

BACKGROUND: The present study aimed to evaluate the potential of enzymes produced by artichoke (Cynara scolymus L.) flower cell suspension cultures elicited by melatonin (5 µm) and salicylic acid (50 µm) on the production and characteristics of miniature goat cheeses. In this study, five types of fresh miniature goat cheese were produced using whole artichoke flower extract, salicylic acid (50 µm) or melatonin (5 µm) treated artichoke suspension cell culture extracts, a culture extract without elicitor treatment (control) and rennin enzyme. RESULTS: The milk clotting activity values of the enzymes were measured in the range 0.52-0.74. The effect of the enzymes on the titratable acidity, water-soluble nitrogen, ripening index, αs-caseins and ß-caseins of goat cheese was significant (P < 0.05). The highest level of casein degradation was observed in the cheese produced with the enzyme containing melatonin, followed by the cheese produced with the enzyme containing salicylic acid. CONCLUSION: For the enzymes produced by the suspension cell culture method, the addition of melatonin and salicylic acid had a slightly positive effect on the proteolytic activity of the extracts. It was also found that the enzymes obtained from artichokes by the suspension cell culture method did not achieve successful cheese production in terms of chemical, textural and biochemical aspects compared to those obtained from animal enzymes. © 2024 Society of Chemical Industry.

Integrated Metabolomics and Transcriptomics Analyses of the Biosynthesis of Arbutin and 6'-O-Caffeoylarbutin in Vaccinium dunalianum Cell Suspension Cultures Fed with Hydroquinone.

Arbutin and 6'-O-caffeoylarbutin (CA) from Vaccinium dunalianum Wight are known for their ability to inhibit melanin synthesis. To boost the production of arbutin and CA, precursor feeding with hydroquinone (HQ) was studied in V. dunalianum suspension cells. The effect of HQ on the biosynthesis of arbutin and CA in the suspension cells was investigated using high-performance liquid chromatography (HPLC), and possible molecular mechanisms were analyzed using metabolomics and transcriptomics analyses. HPLC analysis only showed that the addition of HQ significantly enhanced arbutin synthesis in cells, peaking at 15.52 ± 0.28 mg·g-1 after 0.5 mmol·L-1 HQ treatment for 12 h. Subsequently, metabolomics identified 78 differential expression metabolites (DEMs), of which arbutin and CA were significantly up-regulated metabolites. Moreover, transcriptomics found a total of 10,628 differential expression genes (DEGs). The integrated transcriptomics and metabolomics revealed that HQ significantly enhanced the expression of two arbutin synthase (AS) genes (Unigene0063512 and Unigene0063513), boosting arbutin synthesis. Additionally, it is speculated that CA was generated from arbutin and 3,4,5-tricaffeoylquinic acid catalyzed by caffeoyl transferase, with Unigene0044545, Unigene0043539, and Unigene0017356 as potentially associated genes with CA synthesis. These findings indicate that the precursor feeding strategy offers a promising approach for the mass production of arbutin and CA in V. dunalianum suspension cells and provides new insights for CA biosynthesis in V. dunalianum.

Unveiling the potential: Extracellular vesicles from plant cell suspension cultures as a promising source.

Extracellular vesicles are secreted by all eukaryotic cells and they have an important role in intercellular signaling. Plant extracellular vesicles (PEVs) are a novel area of research that has gained attention due to their potential implications in biomolecule transport and therapeutic applications. PEVs are lipid bilayer-enclosed structures that contain a diverse cargo of biomolecules such as proteins and lipids. Moreover, it is known that PEVs have a noticeable therapeutic potential for various conditions such as inflammation and oxidative stress. However, there are critical problems such as removing the endosomes and plant-derived biomolecules that decrease the standardization and therapeutic efficacy of PEVs. In our study, the aim was to characterize plant cell suspension-derived extracellular vesicles (PCSEVs) obtained from two different plant cell suspension cultures: Stevia rebaudiana and Vaccaria hispanica. These vesicles were isolated using ultrafiltration and characterized with nanoparticle tracking analysis (NTA) and atomic force microscopy (AFM). The molecular composition of PCSEVs was profiled and the cellular uptake assay was performed. Our results demonstrated that PCSEVs have a spherical shape, less than 200 nm. In the fatty acid analysis, the primary components in PCSEVs were palmitic acid, linoleic acid, and cis-vaccenic acid. The protein content of Stevia rebaudiana-derived EVs (SDEVs) was largely associated with proteins involved in extracellular structures and functions. Conversely, Vaccaria hispanica-derived EVs (HDEVs) displayed a higher presence of cytosolic proteins. These findings contribute to the understanding of PCSEVs and open up potential avenues in extracellular vesicle research, pointing to promising prospects for future innovations in various fields.

Addressing bioreactor hiPSC aggregate stability, maintenance and scaleup challenges using a design of experiment approach.

BACKGROUND: Stem cell-derived therapies hold the potential for treatment of regenerative clinical indications. Static culture has a limited ability to scale up thus restricting its use. Suspension culturing can be used to produce target cells in large quantities, but also presents challenges related to stress and aggregation stability. METHODS: Utilizing a design of experiments (DoE) approach in vertical wheel bioreactors, we evaluated media additives that have versatile properties. The additives evaluated are Heparin sodium salt (HS), polyethylene glycol (PEG), poly (vinyl alcohol) (PVA), Pluronic F68 and dextran sulfate (DS). Multiple response variables were chosen to assess cell growth, pluripotency maintenance and aggregate stability in response to the additive inputs, and mathematical models were generated and tuned for maximal predictive power. RESULTS: Expansion of iPSCs using 100 ml vertical wheel bioreactor assay for 4 days on 19 different media combinations resulted in models that can optimize pluripotency, stability, and expansion. The expansion optimization resulted in the combination of PA, PVA and PEG with E8. This mixture resulted in an expansion doubling time that was 40% shorter than that of E8 alone. Pluripotency optimizer highlighted the importance of adding 1% PEG to the E8 medium. Aggregate stability optimization that minimizes aggregate fusion in 3D culture indicated that the interaction of both Heparin and PEG can limit aggregation as well as increase the maintenance capacity and expansion of hiPSCs, suggesting that controlling fusion is a critical parameter for expansion and maintenance. Validation of optimized solution on two cell lines in bioreactors with decreased speed of 40 RPM, showed consistency and prolonged control over aggregates that have high frequency of pluripotency markers of OCT4 and SOX2 (> 90%). A doubling time of around 1-1.4 days was maintained after passaging as clumps in the optimized medium. Controlling aggregate fusion allowed for a decrease in bioreactor speed and therefore shear stress exerted on the cells in a large-scale expansion. CONCLUSION: This study resulted in a control of aggregate size within suspension cultures, while informing about concomitant state control of the iPSC state. Wider application of this approach can address media optimization complexity and bioreactor scale-up challenges.

Spermine and spermidine inhibit or induce programmed cell death in Arabidopsis thaliana in vitro and in vivo in a dose-dependent manner.

Polyamines are ubiquitous biomolecules with a number of established functions in eukaryotic cells. In plant cells, polyamines have previously been linked to abiotic and biotic stress tolerance, as well as to the modulation of programmed cell death (PCD), with contrasting reports on their pro-PCD and pro-survival effects. Here, we used two well-established platforms for the study of plant PCD, Arabidopsis thaliana suspension cultures cells and the root hair assay, to examine the roles of the polyamines spermine and spermidine in the regulation of PCD. Using these systems for precise quantification of cell death rates, we demonstrate that both polyamines can trigger PCD when applied exogenously at higher doses, whereas at lower concentrations they inhibit PCD induced by both biotic and abiotic stimuli. Furthermore, we show that concentrations of polyamines resulting in inhibition of PCD generated a transient ROS burst in our experimental system, and activated the expression of oxidative stress- and pathogen response-associated genes. Finally, we examined PCD responses in existing Arabidopsis polyamine synthesis mutants, and identified a subtle PCD phenotype in Arabidopsis seedlings deficient in thermo-spermine. The presented data show that polyamines can have a role in PCD regulation; however, that role is dose-dependent and consequently they may act as either inhibitors, or inducers, of PCD in Arabidopsis.

Suspension culture promoted the expansion of NK-92 cells ex vivo by enhancing the expression of IL-2 receptor.

Vigorous ex vivo expansion of NK-92 cells is a pivotal step for clinical adoptive immunotherapy. Interleukin-2 (IL-2) is identified as a key cytokine for NK-92 cells, and it can stimulate cell proliferation after binding to the IL-2 receptor (IL-2R). In this work, the differences in IL-2 consumption and IL-2R expression were investigated between the two culture modes. The results showed that suspension culture favored ex vivo expansion of NK-92 cells compared with static culture. The specific consumption rate of IL-2 in suspension culture was significantly higher than that in static culture. It was further found that the mRNA levels of the two IL-2R subunits remained unchanged in suspension culture, but the proportion of NK-92 cells expressing IL-2Rß was increased, and the fluorescence intensity of IL-2Rß was remarkably enhanced. Meanwhile, the proportion of cells expressing IL-2R receptor complex also increased significantly. Correspondingly, the phosphorylation of STAT5, a pivotal protein in the downstream signaling pathway of IL-2, was up-regulated. Notably, the expression level and colocalization coefficient of related endosomes during IL-2/IL-2R complex endocytosis were markedly elevated, suggesting the enhancement of IL-2 endocytosis. Taken together, these results implied that more IL-2 was needed to support cell growth in suspension culture. Therefore, the culture process was optimized from the perspective of cytokine utilization to further improve the NK-92 cell's expansion ability and function. This study provides valuable insight into the efficient ex vivo expansion of NK-92 cells.

Matrix-free human pluripotent stem cell manufacturing by seed train approach and intermediate cryopreservation.

BACKGROUND: Human pluripotent stem cells (hPSCs) have an enormous therapeutic potential, but large quantities of cells will need to be supplied by reliable, economically viable production processes. The suspension culture (three-dimensional; 3D) of hPSCs in stirred tank bioreactors (STBRs) has enormous potential for fuelling these cell demands. In this study, the efficient long-term matrix-free suspension culture of hPSC aggregates is shown. METHODS AND RESULTS: STBR-controlled, chemical aggregate dissociation and optimized passage duration of 3 or 4 days promotes exponential hPSC proliferation, process efficiency and upscaling by a seed train approach. Intermediate high-density cryopreservation of suspension-derived hPSCs followed by direct STBR inoculation enabled complete omission of matrix-dependent 2D (two-dimensional) culture. Optimized 3D cultivation over 8 passages (32 days) cumulatively yielded ≈4.7 × 1015 cells, while maintaining hPSCs' pluripotency, differentiation potential and karyotype stability. Gene expression profiling reveals novel insights into the adaption of hPSCs to continuous 3D culture compared to conventional 2D controls. CONCLUSIONS: Together, an entirely matrix-free, highly efficient, flexible and automation-friendly hPSC expansion strategy is demonstrated, facilitating the development of good manufacturing practice-compliant closed-system manufacturing in large scale.

Quantitative intra- and intergeneric taxonomic relationships among Micrococcaceae strains reveal contradictions in the historical assignments of the strains and indicate the need for species reclassification.

This article reports the results of quantitative intra- and intergeneric taxonomic relationships among Micrococcaceae strains and a novel endophytic bacterium (SG) isolated from a suspension culture of Arabidopsis thaliana (L.) Heynh in our laboratory. The known strain Rothia sp. ND6WE1A was used as a reference one for SG. Whole-genome sequencing and phylogenetic analysis were based on the 16S rRNA test. Quantitative analysis for the nucleotide identity (ANI) and calculation of evolutionary distances were based on the identified amino acids (AAI) test indicating the generic assignment of the reference strain within and between the identified monophyletic groups of Micrococcaceae. The amino acid data structure of Rothia sp. ND6WE1A was compared against the UniProt database (250 million records) of close lineage of Micrococcaceae, including other Rothia spp. These data presented unique and evolutionary amino acid alignments, eventually expected in the new SG isolate as well. The metagenomic entries of the respective genome and proteome, characterized at the genus and species levels, could be considered for evolutionary taxonomic reclassification of the isolated and the reference strain (SG + Rothia sp. ND6WE1A). Therefore, our results warrant further investigations on the isolated SG strain.

Establishment of a novel cell line, CHO-MK, derived from Chinese hamster ovary tissues for biologics manufacturing.

Chinese hamster ovary (CHO) cells are widely used as a host for producing recombinant therapeutic proteins due to advantages such as human-like post-translational modification, correct protein folding, higher productivity, and a proven track record in biopharmaceutical development. Much effort has been made to improve the process of recombinant protein production, in terms of its yield and productivity, using conventional CHO cell lines. However, to the best of our knowledge, no attempts have been made to acquire new CHO cell lines from Chinese hamster ovary. In this study, we established and characterized a novel CHO cell line, named CHO-MK, derived from freshly isolated Chinese hamster ovary tissues. Some immortalized cell lines were established via sub-culture derived from primary culture, one of which was selected for further development toward a unique expression system design. After adapting serum-free and suspension culture conditions, the resulting cell line exhibited a considerably shorter doubling time (approximately 10 h) than conventional CHO cell lines (approximately 20 h). Model monoclonal antibody (IgG1)-producing cells were generated, and the IgG1 concentration of fed-batch culture reached approximately 5 g/L on day 8 in a 200-L bioreactor. The cell bank of CHO-MK cells was prepared as a new host and assessed for contamination by adventitious agents, with the results indicating that it was free from any such contaminants, including infectious viruses. Taking these findings together, this study showed the potential of CHO-MK cells with a shorter doubling time/process time and enhanced productivity in biologics manufacturing.

Production of Mature Recombinant Human Activin A in Transgenic Rice Cell Suspension Culture.

Activin A belongs to the transforming growth factor (TGF) family member, which exhibits a wide range of biological activities, including the regulation of cellular proliferation and differentiation and the promotion of neuronal survival. The isolation of AA from natural sources can only produce limited quantities of this bioactive protein. In this study, the whole gene of the precursor form of recombinant human activin A (rhAA) contains a signal peptide, and a pro-region and a mature region were cloned into an expression vector under the control of the rice α-amylase 3D (RAmy3D) promoter. To obtain the mature (active) form of rhAA, an enterokinase cleavage site was inserted between the pro-region and mature region of rhAA. The rice seed (Oryza sativa L. cv. Dongjin) was transformed with recombinant vectors by the Agrobacterium-mediated method, and the integration of the target gene into the plant genome was confirmed by genomic PCR. The transcript expression of rhAA in transgenic rice calli was confirmed by a Northern blot analysis of mRNA. The production of rhAA was verified by Western blot analysis and ELISA. The accumulation of secreted rhAA in the culture medium was purified by Ni2+-NTA. The mature form of AA was released from the precursor form of rhAA after proteolytically processing with enterokinase. Western blot shows that the mature AA was split into monomer and homodimer with molecular weights of 14 kDa and 28 kDa under reducing and non-reducing conditions, respectively. These results suggest that the mature form of rhAA could be produced and purified using transgenic rice cell suspension culture.

Optimization of adaptation parameters from adhesion cell culture in serum-containing media to suspension in chemically defined media by superlative box design.

A new design of experiments-superlative box design (SBD), was adopted to optimize the adaptation of Chinese hamster ovary cells from adhesion culture to serum-free suspension culture. It is a general trend to use a serum-free medium instead of a serum-containing medium. The advantage of serum-free medium (chemically defended) is that it does not contain unknown components and avoids safety issues. SBD requires fewer experiments while ensuring a sufficient number of experiments and uniformity in the distribution of experiments amongst all the factors. Six factors were considered in this experimental design with 43 runs plus three more repeating center runs. The cell line was adapted to serum-free media by gradually reducing serum, and from adherent to suspension by rotating at various speeds in a shake flask. Response surface methodology was applied to find the optimum condition. The optimized cell density reached 7.02 × 105 cells/mL, calculated by the quadratic model. Experiments validated the predicted cell adaptation with the maximum cell density. Three suspension runs were selected randomly to perform in the bioreactor to validate cell stability and production homogeneity. This study provides an efficient method to transfer adherent cells to suspension cells and is the first to successfully use SBD and establish a parameter quadratic optimization model.

Transitioning from static to suspension culture system for large-scale production of xeno-free extracellular vesicles derived from mesenchymal stromal cells.

Extracellular vesicles (EVs) derived from mesenchymal stromal cells (MSCs) have shown increasing therapeutic potential in the last years. However, large production of EV is required for therapeutic purposes. Thereby, scaling up MSC cultivation in bioreactors is essential to allow culture parameters monitoring. In this study, we reported the establishment of a scalable bioprocess to produce MSC-EV in suspension cultures using spinner flasks and human collagen-coated microcarriers (3D culture system). We compared the EV production in this 3D culture system with the standard static culture using T-flasks (2D culture system). The EV produced in both systems were characterized and quantify by western blotting and nanoparticle tracking analysis. The presence of the typical protein markers CD9, CD63, and CD81 was confirmed by western blotting analyses for EV produced in both culture systems. The cell fold-increase was 5.7-fold for the 3D culture system and 4.6-fold for the 2D culture system, signifying a fold-change of 1.2 (calculated as the ratio of fold-increase 3D to fold-increase 2D). Furthermore, it should be noted that the total cell production in the spinner flask cultures was 4.8 times higher than that in T-flask cultures. The total cell production in the spinner flask cultures was 5.2-fold higher than that in T-flask cultures. While the EV specific production (particles/cell) in T-flask cultures (4.40 ± 1.21 × 108 particles/mL, p < 0.05) was higher compared to spinner flask cultures (2.10 ± 0.04 × 108 particles/mL, p < 0.05), the spinner flask culture system offers scalability, making it capable of producing enough MSC-EV at a large scale for clinical applications. Therefore, we concluded that 3D culture system evaluated here serves as an efficient transitional platform that enables the scaling up of MSC-EV production for therapeutic purposes by utilizing stirred tank bioreactors and maintaining xeno-free conditions.

Plant Heterotrophic Cultures: No Food, No Growth.

Plant cells are capable of uptaking exogenous organic substances. This inherited trait allows the development of heterotrophic cell cultures in various plants. The most common of them are Nicotiana tabacum and Arabidopsis thaliana. Plant cells are widely used in academic studies and as factories for valuable substance production. The repertoire of compounds supporting the heterotrophic growth of plant cells is limited. The best growth of cultures is ensured by oligosaccharides and their cleavage products. Primarily, these are sucrose, raffinose, glucose and fructose. Other molecules such as glycerol, carbonic acids, starch, and mannitol have the ability to support growth occasionally, or in combination with another substrate. Culture growth is accompanied by processes of specialization, such as elongation growth. This determines the pattern of the carbon budget. Culture ageing is closely linked to substrate depletion, changes in medium composition, and cell physiological rearrangements. A lack of substrate leads to starvation, which results in a decrease in physiological activity and the mobilization of resources, and finally in the loss of viability. The cause of the instability of cultivated cells may be the non-optimal metabolism under cultural conditions or the insufficiency of internal regulation.

Optimised protocols to generate high titre lentiviral vectors using a novel transfection agent enabling extended HEK293T culture following transient transfection and suspension culture.

HIV-1 based lentiviral viruses are considered powerful and versatile gene therapy vectors to deliver therapeutic genes to patients with hereditary or acquired diseases. These vectors can efficiently transduce a variety of cell types when dividing or non-dividing to provide permanent delivery and long-term gene expression. Demand for scalable manufacturing protocols able to generate enough high titre vector for widespread use of this technology is increasing and considerable efforts to improve vector production cost-effectively, is ongoing. Current methods for LV production mainly use transient transfection of producer cell lines. Cells can be grown at scale, either in 2D relying on culturing producer cells in multi-tray flask cell culture factories or in roller bottles or can be adapted to grow in 3D suspensions in large batch fermenters. This suits rapid production and testing of new vector constructs pre-clinically for their efficacy, particle titre and safety. In this study, we sought to improve lentiviral titre over time by testing two alternative commercially available transfection reagents Fugene® 6 and Genejuice® with the commonly used polycation, polyethyleneimine. Our aim was to identify less cytotoxic transfection reagents that could be used to generate LV particles at high titre past the often used 72 h period when vector is usually collected before producer cell death is caused due to post transfection cytotoxicity. We show that LV could be produced in extended culture using Genejuice® and even by transfected cells in glass flasks in suspension. Because this delivery agent is less toxic to 293 T producer cells, following optimisation of transfection we found that LV can be harvested for more than 10 days at high titre. Using our protocol, titres of 109 TU/ml and 108 TU/ml were routinely reached via traditional monolayer conditions or suspension cultures, respectively. We propose, this simple change in vector production enables large volumes of high titre vector to be produced, cost effectively for non-clinical in vivo and in vitro applications or for more stringent downstream clinical grade vector purification.