Formation of a diiron-(µ-η1:η1-CN) complex from acetonitrile solution.

The activation of C-C bonds by transition-metal complexes is of continuing interest and acetonitrile (MeCN) has attracted attention as a cyanide source with comparatively low toxicity for organic cyanation reactions. A diiron end-on µ-η1:η1-CN-bridged complex was obtained from a crystallization experiment of an open-chain iron-NHC complex, namely, µ-cyanido-κ2C:N-bis{[(acetonitrile-κN)[3,3'-bis(pyridin-2-yl)-1,1'-(methylidene)bis(benzimidazol-2-ylidene)]iron(II)} tris(hexafluorophosphate), [Fe2(CN)(C2H3N)2(C25H18N6)2](PF6)3. The cyanide appears to originate from the MeCN solvent by C-C bond cleavage or through carbon-hydrogen oxidation.

Blueshift of the CN stretching vibration of acetonitrile in solution: computational and experimental study.

Acetonitrile, a polar molecule that cannot form hydrogen bonds on its own, interacts with solvent molecules mainly through the lone pair of its nitrogen atom and the π electrons of its CN triple bond [Correction added on 17 July 2024, after first online publication: Acetole has been changed to Acetonitrile in the preceeding sentence.]. Interestingly, acetonitrile exhibits an unexpected strengthening of the triple bond's force constant in an aqueous environment, leading to an upshift (blueshift) in the corresponding stretching vibration: this effect contrasts with the usual consequence of hydrogen bonding on the vibrational frequencies of the acceptor groups, that is, frequency redshift. This investigation elucidates this phenomenon using Raman spectroscopy to examine the behavior of acetonitrile in organic solvent, water, and silver ion aqueous solutions, where an even more pronounced upshift is observed. Raman spectroscopy is particularly well suited for analyzing aqueous solutions due to the minimal scattering effect of water molecules across most of the vibrational spectrum. Computational approaches, both static and dynamical, based on Density Functional Theory and hybrid functionals, are employed here to interpret these findings, and accurately reproduce the vibrational frequencies of acetonitrile in different environments. Our calculations also allow an explanation for this unique behavior in terms of electric charge displacements. On the other hand, the study of the interaction of acetonitrile with water molecules and metal ions is relevant for the use of this molecule as a solvent in both chemical and pharmaceutical applications.

A rapid spectrophotometric test for assessing skin sensitization potential of chemicals by using N-acetyl-L-cysteine methyl ester in chemico.

During the key event 1 of skin sensitization defined as covalent binding or haptenization of sensitizer to either thiol or amino group of skin proteins, a sensitizer not only covalently binds with skin proteins but also interacts with nucleophilic small molecules such as glutathione (GSH). Although GSH would not be directly associated with skin sensitization, this interaction may be applied for developing an alternative test method simulating key event 1, haptenization. Thus, the aim of the present study was to examine whether N-acetyl-L-cysteine methyl ester (NACME), a thiol-containing compound, was selected as an electron donor to determine whether NACME reacted with sensitizers. Following a reaction of NACME with a sensitizer in a 96-well plate, the remaining NACME was measured spectrophotometrically using 5,5'-dithio-bis-(2-nitrobenzoic acid) (DTNB). Following the optimization of test conditions with two different vehicles, such as acetonitrile (ACN) and dimethyl sulfoxide (DMSO), 64 test chemicals were tested to determine the predictive capacity of current NACME test method. The results obtained showed, the predictive capacity of 94.6% sensitivity, 88.9% specificity, and 92.2% accuracy utilizing DMSO as a vehicle with a cutoff NACME depletion of 5.85%. The three parameters were also over 85% in case of ACN. These values were comparable to or better than other OECD-approved test methods. Data demonstrated that a simple thiol-containing compound NACME might constitute as a reliable candidate for identifying reactive skin sensitizers, and that this method be considered as practical method as a screening tool for assessing a chemical's tendency to initiate skin sensitization.

Impact of the chemical insertion of the dimethylamino group on the electronic and optical properties of the 4-(methoxyphenyl acetonitrile) monomer (MPA): a DFT theoretical investigation.

CONTEXT: Density functional theory (DFT) calculations on the ground and the first excited state are performed on the modified and unmodified 4-(methoxyphenyl acetonitrile) monomer (referred to as MPA). The modified monomer named MFA is obtained by Knoevenagel condensation of MPA with dimethylformamide dimethyl acetal (DMF-DMA). DFT computations show that the chemical grafting of the dimethylamino group onto the MPA unit induces a great change in the geometric, electronic, and optical properties. Going from MPA to MFA monomer, a great change in the frontier orbitals of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in the ground and the first excited state is observed. Consequently, a reduction in the energy gap HOMO-LUMO and an enhancement in the absorption and emission properties are observed under the chemical modification. The observed modifications in the electronics and optical properties are the result of the charge transfer appearing between the cyano (C≡N) acceptor group and the dimethylamino (DMF-DMA)-grafted group donor ring. METHODS: Quantum chemical calculations were performed in the ground and the first excited state using the density functional theory (DFT), and it extends the time-dependent density functional theory (TD-DFT), implemented in the Gaussian 09 software package. The ground state is obtained by optimization of the studied molecular geometries by employing the DFT/M062X/6-31G(d,p) level of theory. The first excited state is obtained by re-optimization of the ground state geometries using the TD-DFT/M062X/6-31G(d,p) level of theory. The contour plots of the frontier orbitals and the molecular electrostatic potential (MEP) maps are obtained from the ground and the first excited state, optimized geometries, and drawn using Gaussview software.

Half-Inch Monolithic Spatial Heterodyne Raman Spectrometer: A Study of Polarized Raman Spectra of Organic Liquids and Instrumental Performance.

Raman spectroscopy allows for the unambiguous identification of materials through the inelastic scattering of light. This technique has a great many uses in various aspects of society from academic, scientific, and industry. This paper explores a specific type of Raman spectrometer called a spatial heterodyne Raman spectrometer (SHRSy), which is a variation of an interferometric spectrometer. It utilizes a Michelson interferometer and replaces the mirrors with gratings that transform it from a time-domain spectrometer to a spatial-domain spectrometer, allowing for the entirety of the spectrum to be captured at once. This study specifically tests a half-inch two-grating monolithic SHRS (½-in. 2g-mSHRS), which has a weight of <60 g and a size of 2.2 × 2.2 × 1.3 cm. To do this we excite a variety of organic liquids with a 532 nm neodymium-doped yttrium aluminum garnet (Nd:YAG) pulsed laser, using an excitation energy of 6.5 mJ/pulse and distance of 3 m in conjunction with an intensified charge-coupled device camera. This is the first time that the SHRS has been used for investigating polarized Raman spectra of liquids. We discuss and contrast the instrumental properties such as resolution, spectral range, étendue, and field of view with previously tested mSHRS to give context to the instrument's performance.

Application of a robust MALDI mass spectrometry approach for bee pollen investigation.

Pollen collected by pollinators can be used as a marker of the foraging behavior as well as indicate the botanical species present in each environment. Pollen intake is essential for pollinators' health and survival. During the foraging activity, some pollinators, such as honeybees, manipulate the collected pollen mixing it with salivary secretions and nectar (corbicular pollen) changing the pollen chemical profile. Different tools have been developed for the identification of the botanical origin of pollen, based on microscopy, spectrometry, or molecular markers. However, up to date, corbicular pollen has never been investigated. In our work, corbicular pollen from 5 regions with different climate conditions was collected during spring. Pollens were identified with microscopy-based techniques, and then analyzed in MALDI-MS. Four different chemical extraction solutions and two physical disruption methods were tested to achieve a MALDI-MS effective protocol. The best performance was obtained using a sonication disruption method after extraction with acetic acid or trifluoroacetic acid. Therefore, we propose a new rapid and reliable methodology for the identification of the botanical origin of the corbicular pollens using MALDI-MS. This new approach opens to a wide range of environmental studies spanning from plant biodiversity to ecosystem trophic interactions.

Impact of Mycotoxin Metabolites Deepoxy-Deoxynivalenol and Beta-Zearalenol on Bovine Preimplantation Embryo Development in the Presence of Acetonitrile.

The quality of animal feed is increasingly affected by weather conditions, high humidity, and damage to grains, which have led to various mycotoxin-producing moulds. The aim of this study was to determine the effects of the combination of deepoxy-deoxynivalenol and beta-zearalenol on the development of preimplantation bovine embryos, the extent to which the presence of both mycotoxin metabolites affects the development of in vitro cultured bovine embryos, or whether the effect of both toxins enhances embryotoxicity. Ovaries were transported from the abattoir to the laboratory and, after maturation and fertilisation, zygotes were placed in an embryo culture medium (IVC) with different mycotoxin metabolite concentrations diluted in acetonitrile. It was found that the blastocyst rate of cleaved embryos was affected by 1 µL acetonitrile in 400 µL medium (0.25%) compared to the group without acetonitrile. For this reason, it was decided to use acetonitrile as a control group, and the desired mycotoxin metabolite concentrations were diluted in the lowest possible amount of acetonitrile (0.5 µL) that could be accurately added to the study groups. There was no statistical difference when the higher mycotoxin metabolite concentrations were added.

Development of an HPLC device with water/acetonitrile with NaCl mixed solution that induces a phase-separation multiphase flow as the eluent in the separation column.

We developed a novel HPLC device where the phase-separation multiphase flow worked as the eluent in the separation column by using a water/acetonitrile/ethyl acetate triple mixed solution as a dual-phase-separation solution. Dual-phase-separation solutions form a phase-separation multiphase flow in a microscopic space. The new separation mechanism in the HPLC is called phase-separation mode. In this study, we used water and acetonitrile with NaCl mixed solution as a dual-phase-separation solution instead of the triple mixed solution. Octadecylsilyl (ODS)-modified particle- and porous silica particle-packed separation columns were united with the HPLC device for phase-separation mode caused by phase-separation multiphase flow. NA (1-naphthol) and NDS (2,6-naphthalenedisulfonic acid) were analyzed by the device as model sample. Using the water and acetonitrile with NaCl mixed solution at the solvent volume ratio of 5:5, NA and NDS were not separated on either column at 25 °C. On the other hand, they were separated with the order NDS and NA on the ODS column and separated with the order NA and NDS on the silica column in phase-separation mode at 0 °C. We discuss the separation mechanism of phase-separation mode using the water and acetonitrile with NaCl mixed solution at 0 °C.

Determination of 10 mycotoxins in wine, baijiu, and huangjiu of the Chinese market by liquid chromatography tandem mass spectrometry and exposure estimation.

In this study, liquid chromatography tandem mass spectrometry (LC-MS/MS) was employed to analyze the prevalence of 10 mycotoxins in 140 samples from the Chinese market, aiming to assess the exposure of Chinese individuals to these mycotoxins through the consumption of wine, baijiu, and huangjiu. Mycotoxins were detected in 98% of the samples, with fumonisins (FBs), deoxynivalenol (DON), and zearalenone (ZEN) exhibiting positive rates exceeding 50%. Regarding the exposure of the Chinese population to mycotoxins resulting from alcoholic beverage consumption, fruit wine intake made a relatively significant contribution to aflatoxin exposure, while baijiu showed a relatively significant contribution to ZEN exposure (1.84%). The analysis of the correlation between grape variety, wine region, and mycotoxin content demonstrated that FBs, ZEN, and DON were significantly influenced by grape variety and wine region. This research holds great significance in protecting human life and health, as well as in the production of safer alcoholic beverages.

Application of a Carbon Fiber Microelectrode as a Sensor for Apocynin Electroanalysis.

In this study, a carbon fiber microelectrode (CF) was applied for the investigation of the electrochemical behavior of the natural antioxidant, apocynin (APO). Given the limited solubility of APO in water, a mixture of anhydrous acetic acid (AcH) with 20%, v/v acetonitrile (AN) and 0.1 mol L-1 sodium acetate (AcNa) was used. The electrochemical properties of APO were examined through linear sweep voltammetry (LSV), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). The anodic oxidation of APO, which is the basis of the method used, proved to be diffusion-controlled and proceeded with a two-electron and one proton exchange. Both radicals and radical cations, arising from the first and second step of electrode reactions, respectively, underwent subsequent chemical transformations to yield more stable final products (EqCiEiCi mechanism). Using optimized DPV conditions, the anodic peak current of APO at a potential of 0.925 V vs. Ag/AgCl showed a good linear response within the concentration range of 2.7 × 10-6-2.6 × 10-4 mol L-1. The detection and quantification limits were determined as 8.9 × 10-7 and 2.7 × 10-6 mol L-1, respectively. The developed DPV method enabled the successful determination of APO in herbal extracts and in dietary supplements. It should be noted that this is the first method to be used for voltammetric determination of APO.

Magnetic nanoparticle-mediated enrichment technology combined with microfluidic single cell separation technology: A technology for efficient separation and degradation of functional bacteria in single cell liquid phase.

Although there are many microorganisms in nature, the limitations of isolation and cultivation conditions have restricted the development of artificial enhanced remediation technology using functional microbial communities. In this study, an integrated technology of Magnetic Nanoparticle-mediated Enrichment (MME) and Microfluidic Single Cell separation (MSC) that breaks through the bottleneck of traditional separation and cultivation techniques and can efficiently obtain more in situ functional microorganisms from the environment was developed. MME technology was first used to enrich rapidly growing active bacteria in the environment. Subsequently, MSC technology was applied to isolate and incubate functional bacterial communities in situ and validate the degradation ability of individual bacteria. As a result, this study has changed the order of traditional pure culture methods, which are first selected and then cultured, and provided a new method for obtaining non-culturable functional microorganisms.

Crystal-Phase-Engineered High-Entropy Alloy Aerogels for Enhanced Ethylamine Electrosynthesis from Acetonitrile.

Crystal-phase engineering that promotes the rearrangement of active atoms to form new structural frameworks achieves excellent result in the field of electrocatalysis and optimizes the performance of various electrochemical reactions. Herein, for the first time, it is found that the different components in metallic aerogels will affect the crystal-phase transformation, especially in high-entropy alloy aerogels (HEAAs), whose crystal-phase transformation during annealing is more difficult than medium-entropy alloy aerogels (MEAAs), but they still show better electrochemical performance. Specifically, PdPtCuCoNi HEAAs with the parent phase of face-centered cubic (FCC) PdCu possess excellent 89.24% of selectivity, 746.82 mmol h-1 g-1 cat. of yield rate, and 90.75% of Faraday efficiency for ethylamine during acetonitrile reduction reaction (ARR); while, maintaining stability under 50 h of long-term testing and ten consecutive electrolysis cycles. The structure-activity relationship indicates that crystal-phase regulation from amorphous state to FCC phase promotes the atomic rearrangement in HEAAs, thereby optimizing the electronic structure and enhancing the adsorption strength of reaction intermediates, improving the catalytic performance. This study provides a new paradigm for developing novel ARR electrocatalysts and also expands the potential of crystal-phase engineering in other application areas.

Interaction of exogenous acetylcholinesterase and butyrylcholinesterase with amyloid-ß plaques in human brain tissue.

Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) are associated with amyloid-ß (Aß) plaques and exhibit altered biochemical properties in human Alzheimer's disease (AD), as well as in the transgenic 5XFAD mouse model of AD amyloidosis. In the brains of the 5XFAD mouse model devoid of BChE enzyme (5XFAD/BChE-KO), incubation of tissue sections with exogenous BChE purified from human plasma (pl-BChE) leads to its association with Aß plaques and its biochemical properties are comparable to those reported for endogenous BChE associated with plaques in both human AD and in 5XFAD mouse brain tissue. We sought to determine whether these observations in 5XFAD/BChE-KO mice also apply to human brain tissues. To do so, endogenous ChE activity in human AD brain tissue sections was quenched with 50 % aqueous acetonitrile (MeCNaq) leaving the tissue suitable for further studies. Quenched sections were then incubated with recombinant AChE (r-AChE) or pl-BChE and stained for each enzymes' activity. Exogenous r-AChE or pl-BChE became associated with Aß plaques, and when bound, had properties that were comparable to the endogenous ChE enzymes associated with plaques in AD brain tissues without acetonitrile treatment. These findings in human AD brain tissue extend previous observations in the 5XFAD/BChE-KO mouse model and demonstrate that exogenously applied r-AChE and pl-BChE have high affinity for Aß plaques in human brain tissues. This association alters the biochemical properties of these enzymes, most likely due a conformational change. If incorporation of AChE and BChE in Aß plaques facilitates AD pathogenesis, blocking this association could lead to disease-modifying approaches to AD. This work provides a method to study the mechanism of AChE and BChE interaction with Aß plaque pathology in post-mortem human brain tissue.

Exploring the potential of Mustard (Brassica spp.) seeds through 'Kolhu' traditional method of extraction and novel identification of an anti-cancer dipeptide, Aurantiamide acetate (Asperglaucide) on ultra-performance liquid chromatography-mass spectrometry coupled with quadrupole time-of-flight (UPLC/MS-QToF) analytical platform.

Mustard (Brassica spp.) is one of the world's oldest condiments in the food basket, which holds a significant place in the global culinary landscape due to historical prominence and perceived health benefits. This study explores the extraction of oils from Mustard seeds by employing traditional 'Kolhu' method, modern supercritical fluid, and solvent extraction techniques. This study, for the first-time, identified Aurantiamide acetate, a potent anti-cancer dipeptide in Mustard seeds using ultra-performance liquid chromatography-mass spectrometry coupled with quadrupole time-of-flight (UPLC/MS-QToF) analytical platform. The analytical methodology was meticulously validated encompassing optimal parameters such as limit of detection, limit of quantification, precision, accuracy, linearity and robustness, within the range. Interestingly, 'Kolhu' method of oil extraction exhibited better yield of Aurantiamide acetate, suggesting superior efficiency of traditional methods. This study accentuates the importance of classical extraction methods, used traditionally, and emphasizes that naturally occurring substances indeed could be harnessed for better health.

Photochemistry of (n-Bu4N)2[Pt(NO3)6] in acetonitrile.

Photochemistry of the (n-Bu4N)2[Pt(NO3)6] complex in acetonitrile was studied by means of stationary photolysis and nanosecond laser flash photolysis. The primary photochemical process was found to be an intramolecular electron transfer followed by an escape of an •NO3 radical to the solution bulk. The spectra of two successive Pt(III) intermediates were detected in the microsecond time domain, and their spectral and kinetic characteristics were determined. These intermediates were identified as PtIII(NO3)52- and PtIII(NO3)4- complexes. Disproportionation of Pt(III) species resulted in formation of final Pt(II) products.

Analyzing of L-tryptophan thermodynamics and its solubility in aqueous acetonitrile blends at diverse temperatures.

This paper delves into an investigation of the solubility characteristics of L-tryptophan within binary solvent systems containing aqueous acetonitrile. The primary emphasis of the study revolves around assessments based on mole fractions. The study utilizes these solubility values to assess thermodynamic constraints, including solution entropies and solution transfer free energetics. The calculated thermodynamic energies are correlated with interaction parameters, including Gibbs free energies and entropies, pertaining to the transfer of L-tryptophanfrom water to binary solvent blends of acetonitrile and water. Mathematical expressions are utilized to determine the transfer Gibbs free energies for chemical interactions, and the consequent entropies are clarified within the framework of solvent-solvent interactions. To expound upon the stability of L-tryptophan within the water-acetonitrile mixed system, we investigate the energetic aspects related to the transfer of chemicals Gibbs free energies. Additionally, standard temperature (298.15 K) is employed to calculate various related physicochemical parameters of solute/solvent.

Solvent effect on the detection of peptides and proteins by nanoelectrospray ionization mass spectrometry: Anomalous behavior of aqueous 2-propanol.

To investigate the solvent effect on the detection of peptides and proteins, nanoelectrospray mass spectra were measured for mixtures of 1 % acetic acid and 5 × 10-6 M gramicidin S (G), ubiquitin (U), and cytochrome c (C) in water (W), methanol (MeOH), 1-propanol (1-PrOH), acetonitrile (AcN), and 2-propanol (2-PrOH). Although doubly protonated G (G2+) and multiply protonated U (Un+) and C (Cn+) were readily detected with a wide range of mixing ratios of W solutions for MeOH, 1-PrOH, and AcN, Cn+ was totally suppressed for the solutions with mixing ratios (v/v) of W/2-PrOH (50/50) and (70/30). However, denatured Cn+ started to be detected with W/2-PrOH (90/10) together with Gn+ (n = 1, 2) and native Un+ (n = 6-8). At the mixing ratio of W/2-PrOH (95/5), native Cn+ (n = 7-10) together with Gn+ (n = 1, 2) and native Un+ (n = 6-8) were detected with high ion intensities. The use of W/2-PrOH (95/5) is profitable because it enables the detection of native proteins with high detection sensitivities.

Study of the Ternary Mixture of Methanol/Formamide/Acetonitrile via Solvatochromic Probes.

Following previous studies, the ternary mixture of methanol/formamide/acetonitrile (MeOH/Formamide/MeCN) was studied using the UV-Vis absorption spectra at 298.15 K with a set of five probes, 4-nitroaniline, 4-nitroanisole, 4-nitrophenol, N,N-dimethyl-4-nitroaniline and 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridinio)phenolate (Reichardt betaine dye), for a total of 22 mole ternary fractions. In addition, nine mole fractions of the underling binary mixtures, MeOH/Formamide and Formamide/MeCN were also tested. Spectroscopic results were used to model the preferential solvation order for each probe in the mixtures. The Kamlet-Taft solvatochromic solvent parameters, α, ß, and π*, were also computed through the use of the solvatochromic shifts of the five probe indicators. Moreover, discrepancies in the spectroscopic behavior of 4-nitrophenol in formamide-rich mixtures were observed and analyzed.

Electro-catalytic adsorption mechanism of acetonitrile in water using a ME-ACFs system.

Acetonitrile wastewater is difficult to treat due to its high salinity and toxicity to microorganisms. In this paper, a micro electro-activated carbon fiber coupled system (ME-ACF) was established to treat simulated acetonitrile wastewater. In the 200 ml system, the concentration of acetonitrile adsorbed by ACF was 91.3 mg/L, while that of acetonitrile adsorbed by ME-ACF was 150.6 mg/L, and the removal efficiency was increased by 65 % in comparison. The activated carbon fibers before and after the reaction were subjected to a series of characterization, and it was found that the SABET decreased from 1393.48 m2/g to 1114.93 m2/g and 900.23 m2/g, respectively, but the oxygen on the surface of the activated carbon fibers was increased, and the effect of the micro electrolytic system on the activated carbon fibers was then analyzed. The possible reasons for the formation of acetic acid contained in the products were also discussed using DFT simulations. The removal mechanism of acetonitrile by ME-ACF was considered to be electrically enhanced adsorption and electro-catalytic hydrolysis.

Exploring the Interaction of Indole-3-Acetonitrile with Neuroblastoma Cells: Understanding the Connection with the Serotonin and Dopamine Pathways.

Indole-3-acetonitrile, a compound produced by bacteria and plants as a defense and survival signal in response to attacks, has been recently discovered as a metabolite produced by human cancer cells. This discovery suggests a potential association between IAN and cancer progression in patients. Consequently, the aim of this work was to study the effects of IAN on a specific cancer cell line, SH-SY5Y, and elucidate its connection to the serotonin and dopamine pathways by examining the precursors of these neurotransmitters. To achieve this, a cellular viability assay was conducted, along with a morphological evaluation of the cells under both normal and stress conditions. Our results demonstrated that for the highest concentrations in our study, IAN was able to reduce the cellular viability of the cells. Furthermore, when IAN was combined with the amino acids that originate the neurotransmitters, it was possible to observe that in both combinations there was a decrease in the viability of the cells. Thus, IAN may in fact have some influence on both the serotonin and dopamine pathways since changes in cell viability were observed when it was added together with the amino acids. This preliminary study indicates the presence of an interaction between IAN and neuroblastoma cells that justifies further exploration and study.