Automated dose evaluation on daily cone-beam computed tomography for breast cancer patients.

BACKGROUND AND PURPOSE: Our goal was to develop a workflow to automatically evaluate delivered dose on daily cone beam computed tomography (CBCT) in all breast cancer patients to assess dosimetric impact of anatomical changes and guide decision-making for offline plan adaptation. MATERIALS AND METHODS: The workflow automatically processes the daily CBCTs of all breast cancer patients receiving local and locoregional radiotherapy. The planning-CT is registered to the CBCT to create a synthetic CT and propagate contours. A forward dose calculation is performed, and DVH parameters are extracted and printed in a report. We evaluated the workflow on a group level and in a subset of 30 patients on a patient-specific level, including comparison to clinical evaluation on additional planning-CT in 10 patients. RESULTS: 7454 fractions in 647 patients were analyzed over a period of seven months. Median breast clinical target volume V95% was ≥ 95 % for 97 % of the patients. The workflow would have provided useful additional insights for decision-making for the requirement of plan adaptation, based on debatable disagreement with the clinical decision in half of the cases with an additional planning-CT. The workflow also identified cases with suboptimal coverage not identified in the clinical procedure. CONCLUSION: We developed a fully automated workflow for dose evaluation on daily CBCT for local and locoregional breast radiotherapy. We have demonstrated its potential for aiding decision-making for plan adaptation in patients with changing anatomy and its capability to highlight patients that may receive suboptimal treatment and require closer clinical evaluation of treatment quality.

The prevalence of root canal treatment, periapical status, and coronal restorations in elderly patients in the Polish population.

Objectives: The aim of this retrospective cohort study was to determine the prevalence and correlations between root canal treatment, periapical status, and coronal restoration detected using cone beam computed tomography (CBCT) in the elderly Polish population (60-79 years). Methods: A total of 480 CBCT images were assessed. Collected data included: age, gender, the tooth location, direct restoration, decay, single crown, abutment of fixed bridge, the quality of the restoration, root canal treatment, post and core, apical periodontitis (AP), and quality of root filling. Results: The number of teeth in the elderly patients decreased, while the number of endodontically treated teeth increased with age. More teeth were preserved in mandible, the most common group of teeth were incisors. AP was more often detected in the maxilla in general, and in mandibular molars. The over-filling was observed more frequently in maxilla, in maxillary molars and in mandibular premolars, while the short-filling in maxillary and mandibular molars. AP was significantly more often observed in short-filled root canals than in other length criteria (overfilled, adequately, lack of filling). Conclusions: Inadequate prosthetic restoration, presence of post, pulpotomy, missed canals and root canal treated teeth were associated with increased prevalence of AP. Clinical significance: The article indicates the need of treatment of elderly population in Poland. There is the demand to enhance the quality of endodontic and restorative treatment in this population. Additionally, CBCT examination, if indicated, should be implemented in the course of endodontic therapy to provide adequate information to clinicians.

A treatment-site-specific evaluation of commercial synthetic computed tomography solutions for proton therapy.

Background and purpose: Despite the superior dose conformity of proton therapy, the dose distribution is sensitive to daily anatomical changes, which can affect treatment accuracy. This study evaluated the dose recalculation accuracy of two synthetic computed tomography (sCT) generation algorithms in a commercial treatment planning system. Materials and methods: The evaluation was conducted for head-and-neck, thorax-and-abdomen, and pelvis sites treated with proton therapy. Thirty patients with two cone-beam computed tomography (CBCT) scans each were selected. The sCT images were generated from CBCT scans using two algorithms, Corrected CBCT (corrCBCT) and Virtual CT (vCT). Dose recalculations were performed based on these images for comparison with "ground truth" deformed CTs. Results: The choice of algorithm influenced dose recalculation accuracy, particularly in high dose regions. For head-and-neck cases, the corrCBCT method showed closer agreement with the "ground truth", while for thorax-and-abdomen and pelvis cases, the vCT algorithm yielded better results (mean percentage dose discrepancy of 0.6 %, 1.3 % and 0.5 % for the three sites, respectively, in the high dose region). Head-and-neck and pelvis cases exhibited excellent agreement in high dose regions (2 %/2 mm gamma passing rate >98 %), while thorax-and-abdomen cases exhibited the largest differences, suggesting caution in sCT algorithm usage for this site. Significant systematic differences were observed in the clinical target volume and organ-at-risk doses in head-and-neck and pelvis cases, highlighting the importance of using the correct algorithm. Conclusions: This study provided treatment site-specific recommendations for sCT algorithm selection in proton therapy. The findings offered insights for proton beam centers implementing adaptive radiotherapy workflows.

Feasibility of Immediate, Early and Delayed Implant Placement for Single Tooth Replacement in the Premaxilla: A Retrospective Cone-Beam Computed Tomography Study of 100 Cases.

AIM: To assess the feasibility of immediate (IIP), early (EIP) and delayed implant placement (DIP) for single tooth replacement in the premaxilla on the basis of the complete indication area of each approach in routine practice. MATERIALS AND METHODS: Data from 100 patients (59 women, 41 men, all Caucasians) aged between 19 and 81 years old (mean age 51.71) who had been consecutively treated with a single implant in the premaxilla (13-23) in one private periodontal practice were retrospectively collected. Demographic data, diagnostic information and linear measurements were extracted from patient files and CBCTs. The feasibility of IIP, EIP and DIP was assessed for all cases by both authors, based on the following criteria: availability of apical bone, position of the tooth in relation to the morphology of the alveolar process, buccal bone morphology and presence of midfacial recession. The reasons for not being able to perform an approach, and the viable alternatives for each approach were secondary outcomes. DIP was considered to have been preceded by alveolar ridge preservation (ARP). RESULTS: Ninety-two patients could be treated by means of IIP, EIP or DIP. In eight patients none of these approaches were possible as they required bone augmentation prior to implant placement. Fifty-two patients (95% CI: 42%-62%) could by treated with IIP, 58 (95% CI: 48%-67%) with EIP and 88 (95% CI: 80%-93%) with DIP. The feasibility proportions of IIP and EIP were significantly lower than the one of DIP (p < 0.001). All patients who could be treated with IIP could also be treated with EIP or DIP. Lack of apical bone for implant anchorage was the main reason for not being able to perform IIP and EIP. Complete loss of the buccal bone wall and the need for bone augmentation prior to implant placement were the reasons for not being able to perform DIP. CONCLUSION: From the results of this retrospective CBCT analysis, DIP is nearly always possible in contrast to IIP and EIP. Therefore, and since it is much easier than IIP and EIP, inexperienced clinicians should mainly focus on ARP and DIP in clinical practice deferring IIP and EIP until more surgical skills have been acquired.

The Zpr-3 Antibody Recognizes the 320-354 Region of Rho and Labels Both Rods and Green Cones in Zebrafish.

Retinal markers with high quality and specificity are important for the observation of pathologic changes of retinal cells during retinal development, degeneration, and regeneration. The zpr-3 antibody is widely used to label rods in zebrafish, but the exact antigen is still unknown. In this study, we provided evidence to demonstrate that the antigen gene of zpr-3 is rho, which encodes the rod opsin, and the exact epitope of zpr-3 is the 320-354 region of Rho protein. More importantly, our immunofluorescence assays indicated that zpr-3 labels both the outer segments of rods and green cones on zebrafish retinal sections, probably due to the cross-reaction with the green-cone opsin. Our work is valuable for the scientific community to interpret the experimental data involving the zpr-3 antibody.

The sodium-bicarbonate cotransporter Slc4a5 mediates feedback at the first synapse of vision.

Feedback at the photoreceptor synapse is the first neuronal circuit computation in vision, which influences downstream activity patterns within the visual system. Yet, the identity of the feedback signal and the mechanism of synaptic transmission are still not well understood. Here, we combined perturbations of cell-type-specific genes of mouse horizontal cells with two-photon imaging of the result of light-induced feedback in cones and showed that the electrogenic bicarbonate transporter Slc4a5, but not the electroneutral bicarbonate transporter Slc4a3, both expressed specifically in horizontal cells, is necessary for horizontal cell-to-cone feedback. Pharmacological blockage of bicarbonate transporters and buffering pH also abolished the feedback but blocking sodium-proton exchangers and GABA receptors did not. Our work suggests an unconventional mechanism of feedback at the first visual synapse: changes in horizontal cell voltage modulate bicarbonate transport to the cell, via Slc4a5, which leads to the modulation of feedback to cones.

Correlations of temporomandibular joint morphology and position using cone-beam computed tomography and dynamic functional analysis in orthodontic patients: A cross-sectional study.

Objective: To correlate temporomandibular joint (TMJ) morphology and position with cone-beam computed tomography (CBCT) images, Joint Vibration Analysis (JVA), and Jaw Tracker (JT) to develop a radiation-free, dynamic method for screening and monitoring the TMJ in orthodontic patients. Methods: A total of 236 orthodontic patients without symptoms of TMJ disorders who had undergone CBCT were selected for the JVA and JT tests in this cross-sectional study. TMJ position and morphology were measured using a three-dimensional analysis software. JT measurements involved six opening-closing cycles, and JVA measurements were performed using a metronome to guide the mouth opening-closing movements of the patients. The correlations among the three measuring devices were evaluated. Results: Abnormalities in condylar surface morphology affected the mandibular range of motion. The cut-off value results show that when various measurement groups are within a certain range, abnormalities may be observed in morphology (area under the curve, 0.81; P < 0.001). A 300/< 300 Hz ratio ≥ 0.09 suggested abnormal morphology (P < 0.05). Correlations were observed among the maximum opening velocity, maximum vertical opening position, and joint spaces in the JT measurements. Correlations were also observed between the > 300/< 300 Hz ratio, median frequency, total integral, integral < 300 Hz, and peak frequency with joint spaces in the JVA measurements. Conclusions: JT and JVA may serve as rapid, non-invasive, and radiation-free dynamic diagnostic tools for monitoring and screening TMJ abnormalities before and during orthodontic treatment.

Clinical and radiographic assessment of gummy smile patients with altered passive eruption: a cross-sectional study in a Thai population.

OBJECTIVES: The study aimed to evaluate the clinical crown length (CCL) among patients diagnosed with altered passive eruption (APE), the causes of a gummy smile, the prevalence of APE, and the correlation between parameters. MATERIALS AND METHODS: A total of 86 gummy smile patients (516 teeth) underwent clinical examination and assessment using cone-beam computed tomography (CBCT), photography, and intraoral scanning. RESULTS: Significantly shorter CCL and distance between the cementoenamel junction and bone crest (CEJ-BC) were observed among APE-affected teeth (p < 0.05). Among the patients, 56.1% of patients were diagnosed with APE, and most of them were affected by a combination of APE and hypermobile upper lip (HUL). Based on 183 APE-affected teeth, the prevalence of APE types and subtypes was as follows: APE1A (96; 19.3%), APE1B (78; 15.9%), APE2A (8; 1.6%), and APE2B (1; 0.2%). Positive correlations were found between keratinized gingival width (KGW) and bone thickness (BT), while negative correlations were observed between gingival thickness (GT) and BT. CONCLUSION: Shorter CCL and CEJ-BC were the highlighted features of APE. APE affected approximately half of the gummy smile patients, with most of them presenting with a combination of HUL. Almost teeth affected by APE were classified as Type I, with a nearly equal distribution between subtypes A and B. CLINICAL RELEVANCE: The clinical and radiographic features of APE contribute to a better understanding of this condition and facilitate the management of patients affected by APE. Approximately half of gummy smile patients will require multidisciplinary treatment.

Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.

Analysis of factors affecting bone volume changes after immediate implantation in the maxillary central incisor.

OBJECTIVES: This study aimed to evaluate the clinical outcomes of immediate implantation of single maxillary central incisor and explore factors affecting post-implant bone volume. METHODS: Clinical data and imaging records from pre-surgery, the day of surgery, and 6 months post-surgery of 100 patients (100 implants) with non-salvageable maxillary central incisors who underwent immediate implantation were collected. Bone thickness at the cervical, middle, and apical regions of the implant's labial and palatal sides were measured immediately post-surgery and at 6 months, and bone volume changes were observed. A regression analysis model was used to assess predictive factors for labial and palatal bone plate thickness. RESULTS: At 6 months post-surgery, the labial bone thicknesses at the cervical, middle, and apical regions were 2.35, 2.29, and 3.28 mm, respectively, and those of the palatal side were 0.00, 2.40, and 6.05 mm, respectively. The cervical region had the highest alveolar crest collapse rates, with 32.87% on the labial side and 62.20% on the palatal side. The regression model indicated that factors influencing the thickness of bone at the cervical labial side of the implant included initial bone thickness, the implant center to adjacent tooth center angle, implant diameter, and the type of implant closure (P<0.05). The initial bone thickness on the palatal side was the sole predictor for bone thickness on the palatal side (P<0.05). CONCLUSIONS: Immediate implantation of single maxillary central incisors yields effective clinical results. The thickness of new bone around the implant is influenced by multiple factors. A comprehensive consideration of these factors in the planning of immediate implantation is necessary to achieve optimal therapeutic outcomes.

Analysis on the relationship between Schneiderian membrane thickening in the posterior maxillary region and periapical lesions by cone beam computed tomography.

OBJECTIVES: This study aimed to evaluate the thickening of sinus membrane, which is also named Schneiderian membrane (SM), in patients and its relationship with periapical lesions (PAL) in the posterior maxillary region to provide reference for the prevention and treatment of odontogenic maxillary sinusitis. METHODS: A retrospective analysis was conducted on 554 cone beam computed tomography (CBCT) imaging data of maxillary sinuses from 301 patients who met the inclusion criteria to determine the correlation between PAL and SM thickening in the posterior maxillary region. Cases of pathological SM were recorded and classified on the basis of the degree and type of SM thickening. The correlation between SM thickening and the diameter of PAL, the relationship between the upper edge of PAL and the maxillary sinus floor, and its relationship with whether affected teeth with PAL undergo root canal treatment were evaluated. RESULTS: The detection rate of SM thickening in patients with PAL was significantly higher than in those without PAL, so PAL was correlated with SM thickening. Analysis on the correlation between PAL detection indicators and SM thickening degree showed that SM thickening degree was positively correlated with PAL diameter (cone beam computed tomography-periapical index) and not correlated with the three spread effects between the upper edge of PAL and the maxillary sinus floor, as well as whether the teeth with PAL undergo root canal treatment. The correlation analysis between PAL detection indicators and SM thickening types showed that whether the teeth with PAL undergo root canal treatment was not correlated with SM thickening types, and the diameter of PAL, the three spread effects between the upper edge of PAL, and the maxillary sinus floor were not correlated with SM thickening types. CONCLUSIONS: The PAL of posterior maxillary teeth is closely related to SM thickening, and the diameter of PAL is positively correlated with the degree of SM thickening. Patients with PAL who have undergone root canal treatment often exhibit SM polyp thickening. In addition, the relationship between the upper edge of PAL and the maxillary sinus floor does not affect the possibility of SM development.

Comparative Analysis of 3D Tomography Based Soft Tissue Rendering and Proface Facial Scanning Systems in Orthognathic Surgery.

PURPOSE: This study aimed to investigate the linear and angular differences in the nasolabial soft tissue in patients who underwent bimaxillary orthognathic surgery using two different three-dimensional imaging methods. Furthermore, the advantages, disadvantages, and limitations of these methods were determined after comparing the data obtained from the imaging methods used in the study. MATERIALS AND METHODS: Preoperative (T0) and 6-months postoperative (T1) cone-beam computed tomography (CBCT) and three-dimensional facial scanning (3DFS) data from 22 patients who underwent maxillary advancement surgery were examined. The DICOM (Digital Imaging and Communications in Medicine) data (CBCT group) and ".obj" format images (3DFS group) of the patients were analyzed using Dolphin software (Dolphin Imaging®, Version 12, Chatsworth, CA, USA). The linear and angular soft tissue measurements were calculated after determining the reference anatomical landmarks for both groups. RESULTS: Measurements with CBCT and 3DFS imaging methods were compared at T0, T1, and all measurements (T0+T1). No statistically significant difference was observed between the CBCT and 3DFS groups for five measurements performed at T0 and T0+T1, but statistically significant differences were observed between the groups for the other seven measurements. There was no statistically significant difference between the CBCT and 3DFS groups for six measurements at T1, but there were statistically significant differences between the groups for the other six measurements. After reviewing the postoperative differences in the nasolabial soft tissue, a statistically significant increase in four linear and one angular measurement in the 3DFS group was observed, and there was a statistically significant increase in two linear and two angular measurements in the CBCT group. Upon comparison of postoperative differences in soft tissue alterations, no statistically significant difference between the 3DFS group and the CBCT group were observed in any of the soft tissue measurements. CONCLUSION: Orthognathic surgery has significant effects on nose width and upper lip morphology. Although both 3DFS and CBCT methods can be used to evaluate such effects, the results of the present study revealed differences in sensitivity and limitations between the two methods. Thus, surgical outcomes should be evaluated in consideration of the abovementioned parameters.

Correlation Between Radiological Changes of the Temporomandibular Joint and Upper Cervical Vertebrae in Degenerative Joint Disease: A Cone-Beam Computed Tomography-Based Analytical Study.

Objectives This study was conducted to assess the radiological changes of the temporomandibular joint (TMJ) and cervical vertebrae individually and their correlation in degenerative joint disease (DJD) using a cone-beam computed tomography (CBCT)-based approach. Methodology The study employed a cross-sectional, analytical retrospective design, analyzing one-year data. CBCT scans of 60 patients (120 TMJs) were assessed for degenerative changes using standardized imaging parameters. Eligibility criteria included full field-of-view CBCT scans, excluding those with craniofacial anomalies or prior orthodontic treatment. Radiological assessments of TMJs and cervical vertebrae were conducted by experienced radiologists using the Anjos Pontual method and novel grading system (TMJ Spine Degenerative Severity Index). Results The study included 60 CBCT scans (120 joints), with 31.7% males and 68.3% females. Participants were predominantly aged 31-60 years (58.3%). DJD findings for the right TMJ showed grade 1 changes in 55.0% and grade 2 in 31.7%, while the left TMJ had 46.7% grade 1 and 35.0% grade 2 changes. A strong positive correlation (0.704) was found between bilateral TMJ and cervical vertebrae changes. Age correlated significantly with TMJ alterations but not with cervical vertebrae changes. Conclusion This study demonstrated that there exists a positive association between the radiological changes of TMJ and cervical vertebrae in DJD with age, which can be detected in mild stage of severity on CBCT and can be of use in clinical correlation and application of optimal interventions ensuring better prognosis.

Evaluation of maxillary sinus volume by cone beam computed tomography in asthma patients.

OBJECTIVE: The study aims to evaluate maxillary sinus volume in asthmatic patients. METHODS: Patients who applied to the faculty of dentistry between January 2014 and December 2023 were retrospectively screened. Cone beam computed tomography images of 312 maxillary sinuses (156 people) consisting of asthmatic patients and controls were included in the study. Radiographic images in the study were obtained with a Newtom 5 G (FP, Quantitative Radiology, Verona, Italy) cone beam computed tomography device. SimPlant Pro 16 program (Materialise NV, Leuven, Belgium) measured maxillary sinus volumes. SPSS 25.0 software (IBM SPSS, Inc.) was used to analyze statistical data. RESULTS: As a result of the tests, the right and left maxillary sinus volumes of asthmatic patients were significantly smaller than the control group. No significant relationship was found between age and maxillary sinus in both the study and control groups. Gender distribution was equal between the groups. There was no significant difference between the groups in terms of age. No significant difference was found between the right and left maxillary sinus volumes. CONCLUSION: Considering that there is no other study in the literature measuring maxillary sinus volume in asthmatic patients, this study may guide future research.

The Application of Mask Region-Based Convolutional Neural Networks in the Detection of Nasal Septal Deviation Using Cone Beam Computed Tomography Images: Proof-of-Concept Study.

BACKGROUND: Artificial intelligence (AI) models are being increasingly studied for the detection of variations and pathologies in different imaging modalities. Nasal septal deviation (NSD) is an important anatomical structure with clinical implications. However, AI-based radiographic detection of NSD has not yet been studied. OBJECTIVE: This research aimed to develop and evaluate a real-time model that can detect probable NSD using cone beam computed tomography (CBCT) images. METHODS: Coronal section images were obtained from 204 full-volume CBCT scans. The scans were classified as normal and deviated by 2 maxillofacial radiologists. The images were then used to train and test the AI model. Mask region-based convolutional neural networks (Mask R-CNNs) comprising 3 different backbones-ResNet50, ResNet101, and MobileNet-were used to detect deviated nasal septum in 204 CBCT images. To further improve the detection, an image preprocessing technique (contrast enhancement [CEH]) was added. RESULTS: The best-performing model-CEH-ResNet101-achieved a mean average precision of 0.911, with an area under the curve of 0.921. CONCLUSIONS: The performance of the model shows that the model is capable of detecting nasal septal deviation. Future research in this field should focus on additional preprocessing of images and detection of NSD based on multiple planes using 3D images.

Molecular regulation of axon termination in mechanosensory neurons.

Spatially and temporally accurate termination of axon outgrowth, a process called axon termination, is required for efficient, precise nervous system construction and wiring. The mechanosensory neurons that sense low-threshold mechanical stimulation or gentle touch have proven exceptionally valuable for studying axon termination over the past 40 years. In this Review, we discuss progress made in deciphering the molecular and genetic mechanisms that govern axon termination in touch receptor neurons. Findings across model organisms, including Caenorhabditis elegans, Drosophila, zebrafish and mice, have revealed that complex signaling is required for termination with conserved principles and players beginning to surface. A key emerging theme is that axon termination is mediated by complex signaling networks that include ubiquitin ligase signaling hubs, kinase cascades, transcription factors, guidance/adhesion receptors and growth factors. Here, we begin a discussion about how these signaling networks could represent termination codes that trigger cessation of axon outgrowth in different species and types of mechanosensory neurons.

Efficacy of Online Adaptive Radiotherapy Using Surface Guidance in Treatment of Tracheal Adenoid Cystic Carcinoma.

Primary tracheal tumors are rare, with adenoid cystic carcinoma (ACC) of the trachea being the second most common malignancy of the trachea. Radical surgical resection is found to have better survival outcomes in tracheal ACC. However, with higher submucosal spread rates in tracheal ACC and the inability to achieve clear margins, complete resection is not usually achievable. In these cases, the use of a 60-70 Gy radiation dose is deemed to be sufficient for definitive treatment with or without concurrent chemotherapy. We report a case of an unresectable ACC treated with online daily adaptive cone beam computed tomography (CBCT) radiotherapy on Ethos™ (Varian Medical Systems, Palo Alto, CA). She was planned to receive 59.4 Gy in 33 fractions in two phases. For daily treatment delivery, the patient was set up on the couch using the surface-guided radiotherapy (SGRT) system of AlignRT™ (Vision RT Ltd., London, UK) and translated to the treatment isocenter. A CBCT scan was acquired, followed by rigid registration with the planning scan and PET CT. Organs at risk (OAR) and primary targets were auto-generated by the AI in a two-step process, reviewed, and edited by the radiation oncologist. Adapted and scheduled plans were compared regarding planning target volume (PTV) coverage and dose to OAR. Better PTV coverage was seen in 26 of 33 fractions with the adapted plan. On the days with lesser coverage, adapted plans demonstrated improvement in the hotspot reduction and reduction in hard dose constraints of the esophagus and lungs. Hence, adapted plans were selected for all treatment days. Our results highlight the superior target coverage and improved OAR-sparing plans in daily online adaptive radiotherapy (o-ART) compared to image-guided radiotherapy (IGRT) plans. The system's ability to adapt to daily anatomical changes, improved target coverage, and better sparing of OARs make it an encouraging option for malignancies requiring motion management.

Variations of the Lingula and Mandibular Ramus in the Context of Sagittal Split Ramus Osteotomy: A Cone Beam Computed Tomography Study Supporting an Ethnic-Centric Approach to Orthognathic Surgery.

OBJECTIVES: To investigate the ethnic variations concerning the lingula and ramus of the mandible, with particular emphasis on sagittal split ramus osteotomy (SSRO) in orthognathic surgery. MATERIALS AND METHODS: This study examined Cone beam computed tomography (CBCT) scans from the Kenyan and Malay populations. Lingula morphology was classified into four categories. Morphometric measurements included lingula size, height above the occlusal plane, distance to the second mandibular molar, and distance from its apex to all four mandible borders. Regarding the ramus of the mandible, the thickness of each cortical plate, trabecular bone, and overall thickness were determined at two points. Furthermore, points of fusion of cortical plates were determined in both the vertical and horizontal planes. RESULTS: Among Kenyans, the triangular shape was most common (46.5%, n = 80 sides), while truncated was most common among Malays (34.4%, n = 57 sides). The overall mean size of lingula differed significantly between Kenyan (7.37 ± 2.19 mm) and Malay (4.14 ± 2.50 mm) populations (p<0.001). The lingula was more located postero-superiorly in Kenyans compared to Malays (p < 0.001). The mean distance from the distal aspect of the second mandibular molar to the lingula was 38.37 ± 4.98 mm among Kenyans, in contrast to 31.95 ± 0.03 mm among Malays (p < 0.001). The Malays exhibited a thicker mandible with a larger trabecular distance (5.99 ± 1.41 mm and 3.41 ± 1.29 mm, respectively) than Kenyans (5.28 ± 1.39 mm and 1.98 ± 0.98 mm, respectively) (p < 0.001). The points of fusion of the cortical plates differed significantly between Kenyans and Malays. CONCLUSION: This study focuses on two ethnic groups, Kenyans and Malays, and brings to light the ethnic-based differences in the position of the lingula and the dimensions of the mandibular ramus, both of which are essential considerations in orthognathic surgery. Preoperative consideration of such variations is warranted, potentially mitigating iatrogenic injuries and enhancing successful patient outcomes.

The Impact of Minimum Invasive Access Cavity Design on the Quality of Instrumentation of Root Canals of Maxillary Molars Using Cone-Beam Computed Tomography: An in Vitro Study.

Aim Minimally invasive dentistry has been facilitated by advances in instruments and restorative materials. This study aims to compare the change in the shaping ability of the RECIPROC blue rotary system in both traditional and conservative access cavities, using cone beam computed tomography (CBCT). Material and methods Sixty root canals of 20 artificial maxillary molars were assigned into two groups (n=30 root canals) according to the access cavity design used: Group I: traditional access cavity (TAC) and Group II: conservative access cavity (CAC). CBCT scans of samples were made before and after root canal preparation using the RECIPROC blue rotary system. The shaping parameters are evaluated in root canal transportation and the centering ability. Three CBCT sections per tooth were analyzed at 3, 6, and 9 mm from the apex to assess the canal transportation and centering ability at three levels, apical, middle, and coronal thirds. Data were analyzed using the GraphPad Prism (GraphPad Software, San Diego, CA). Results The results of this study showed a significant difference in transportation within the coronal and middle thirds. However, in apical thirds, there were no significant differences. Both groups observed a significant difference in the centering ability in the coronal third. Conclusion Within the limitations of this study, CAC can be recommended with caution as an alternative access to TAC.

Ebstein Anomaly Successfully Treated With Levosimendan Postoperatively in a 60-Year-Old Female: A Case Report.

Ebstein anomaly is a congenital heart disease that is considered rare and mostly found in pediatrics population. Symptoms in adults vary depending on the degree of the valve displacement and include difficulty breathing, palpitations, stroke, or even fatigue. However, if it occurs in the elderly, they end up with a good prognosis. A novel calcium sensitizer "levosimendan" has been used perioperatively in heart valve replacement to improve the long-term prognosis of patients. The use of the drug has been shown to reduce postoperative mortality in patients with reduction in ejection fraction. We present the case of a 62-year-old female, a known case of hypothyroidism, bronchial asthma, gastroesophageal reflux disease, and recent diagnosis of Ebstein anomaly, who underwent tricuspid valve repair and atrial septal defect repair on being symptomatic, in addition to the successful use of a novel positive inotropic drug with decrease in the intensive care unit stay.