Microwave-assisted supramolecular double crosslinked chitosan-based molecularly imprinted polymer for synergistic recognition and selective recovery of Cd(II) and As(V) from water: Performance and mechanistic insights.

A novel model of the sustainable double crosslinked molecularly imprinted polymer (D-Crosslinked MIP) represented as a supramolecular imprinted polymer was synthesized via the bulk polymerization method. The primary crosslinking was fabricated using biomacromolecule chitosan as a functional monomer and glutaraldehyde as a crosslinker. The primary crosslinked was subjected to dynamic interactions in a secondary crosslinking by binding Al2O3-NPs and TiO2-NPs, forming the supramolecular D-Crosslinked-MIP. The dually crosslinked formed from combining three distinct crosslinkers in one system for the interaction with As(V) and Cd(II). A microwave was employed to evaluate the performance of the designed material in selectivity and extraction of metal ions from water. The FT-IR, XRD, TG/DTA, SEM-EDX, TEM, and XPS were used to verify the characteristics of (D-nano-Al2O3@Crosslinked Chitosan@D-nano-TiO2). The type of solvents, selectivity, interferences, microwave-contact time, pH, temperatures, concentrations, and regeneration were investigated. At 15 s, Cd(II) revealed a recovery capacity of 99.03 %, Qmax 862.07 mg/g, while As(V) demonstrated a recovery capacity of 99.06 %, Qmax 850.75 mg/g. The D-Crosslinked-MIP exhibited BETs of 69.01 m2/g with a pore volume of 0.2340 cm3/g owing to polymeric crosslinking by metal oxide NPs. The kinetics, isotherm models, and mechanisms of dually crosslinking and extraction of toxic metals were discussed.

Fluoroamphiphiles for enhancing immune response of subunit vaccine against SARS-CoV-2.

In recent decades, protein-based therapy has garnered valid attention for treating infectious diseases, genetic disorders, cancer, and other clinical requirements. However, safeguarding protein-based drugs against degradation and denaturation during processing, storage, and delivery poses a formidable challenge. Herein, we designed a novel fluoroamphiphiles polymer to deliver protein. Two different formulations of nanoparticles, cross-linked (CNP) and micelle (MNP) polymer, were prepared rationally by disulfide cross-linked and thin-film hydration techniques, respectively. Two prepared formulations were characterized for size, zeta potential, and morphology. The delivery efficacy of both in vitro and in vivo was also assessed. The in vitro findings demonstrated that both formulations effectively facilitated protein delivery into various cell lines. In vivo experiments revealed that intramuscular administration of the two formulations loaded with a SARS-CoV-2 recombinant receptor-binding domain (RBD) vaccine induced robust antibody responses in mice without adding another adjuvant. These results proved it may be employed as a safe and effective carrier for the delivery of subunit vaccines in vivo.

Dual Cross-Linked Networks Reinforced Polyimide Foams with Outstanding Piezoelectric Properties and Heat Resistance Performance.

The application of traditional isocyanate-based polyimide (PI) foams is highly hindered due to limited flame retardancy, poor mechanical properties, and relatively single functionality. Herein, we propose an effective method to fabricate dual cross-linked polyimide/bismaleimide (PI-BMI) foams with outstanding heat resistance and enhanced mechanical properties by incorporating bis(3-ethyl-5-methyl-4-maleimidophenyl)methane (ME-BMI) as the interpenetrating network. The results show that the prepared PI-BMI composite foams exhibit enhanced mechanical properties with lightweight characteristics (23-80 kg·m-3). When the ME-BMI loading reached 120 wt %, the tensile and compressive strength of PI-BMI composite foam can reach 1.9 and 7.8 MPa, which are 9.6 and 63.3 times higher than that of pure PI foam, respectively. In comparison with PIF-0, the 10% heat loss temperature (Td,10%) of PIF-90 improved by 156 °C. Moreover, the PI-BMI foam piezoelectric sensor containing fluorine groups presents a short response time (14.22 ms), high sensitivity (0.266 V/N), and outstanding stability (10 000 cycles). Besides, the sensor can accurately monitor human activity in different states. This work provides a promising strategy for designing multifunctional PI foams, making them suitable for applications in aerospace and microelectronics.

Poly (lactic acid) electrospun nanofiber membranes: Advanced characterization for biomedical applications with drug loading performance studies.

Traditional dressings have shortcomings such as poor moisture absorption and easy to adhere, making the development of new dressings crucial. In this work, a PLA/PVP crosslinked drug-loaded nanofiber membrane was prepared through electrospinning and ultraviolet crosslinking, with poly (lactic acid) (PLA), polyvinylpyrrolidone (PVP), and salicylic acid (SA) as starting materials. The results demonstrated that the inclusion of PVP notably boosted the viscosity and conductivity of the blend spinning solution. The roughness of the fabricated fiber was elevated, and the diameter of the fibers was more uniform. Additionally, the incorporation of PVP not only enhanced the porosity of the fiber membrane but also effectively decreased its contact angle. Notably, when the PVP content reached 40 %, the contact angle underwent a substantial reduction, decreasing significantly from 125.4° to 82.2°. The SA drug-loaded fiber membrane exhibited a notable bacteriostatic effect against Escherichia coli and Staphylococcus aureus, with its release behavior adhering to Fick's diffusion law. In the cell viability experiment, the cell proliferation rate increased from 94 % to 129 % after 3 days. This shows that the prepared membrane has good antibacterial effect and cell compatibility, which provides a theoretical basis for the construction of a new medical dressing.

Study on properties and simulation application scenarios of flame retarded modified konjac glucomannan organic and inorganic composite aerogel.

In this paper, a new organic-inorganic biomass composite aerogel was prepared by freeze-drying method with glucomannan, hydrophilic isocyanate, water-soluble flame retardant, and water glass as raw materials. Biomass Konjac glucose mannan (KGM) was used as the main network framework, KGM was chemically cross-linked and alkali-cross-linked with hydrophilic isocyanate and Na2SiO3 solution, and flame retardant modified with water-soluble flame retardant and water glass. The microstructure showed an obvious organic-inorganic interpenetrating network structure. The compressive strength of sample K2S4P2 was 4.751 ± 0.089 MPa, and the compression modulus of sample K2S4P1B modified by boric acid hydrolysis of Na2SiO3 was 63.76 ± 1.81 × 103 m2/s2. The introduction of boron ions contributes to the thermal stability of organic components. The peak and total heat release rates of sample K2S4P1A4 decreased by 80.3 % and 50.8 %, respectively. In addition, the thermal simulation calculation of the external wall in winter and summer using ANSYS software showed that the thickness of the insulation layer with the best insulation effect is 40-60 mm. The organic-inorganic composite aerogel provides a simple and environmentally friendly method for the application of external wall insulation systems in low-energy buildings with both mechanical properties and flame retardant properties.

Cyano-functionalized porous hyper-crosslinked cationic polymers for efficient preconcentration and detection of phenolic endocrine disruptors in fresh water and fish.

Sensitively analyzing phenolic endocrine-disrupting chemicals (EDCs) in environmental substrates and aquatic organisms provides a significant challenge. Here, we developed a novel porous hyper-crosslinked ionic polymer bearing cyano groups (CN-HIP) as adsorbent for the highly efficient solid phase extraction (SPE) of phenolic EDCs in water and fish. The CN-HIP gave an excellent adsorption capability for targeted EDCs over a wide pH range, and the adsorption capacity was superior to that of several common commercial SPE adsorbents. The coexistence of electrostatic forces, hydrogen bond, and π-π interactions was confirmed as the main adsorption mechanism. A sensitive quantitative method was established by coupling CN-HIP based SPE method with high-performance liquid chromatography for the simultaneously determining trace bisphenol A, bisphenol F, bisphenol B and 4-tert-butylphenol in fresh water and fish. The method afforded lower detection limits (S/N = 3) (at 0.03-0.10 ng mL-1 for water and 0.8-4.0 ng g-1 for fish), high accuracy (the recovery of spiked sample at 88.0%-112 %) and high precision (the relative standard deviation < 8.5 %). This work provides a feasible method for detecting phenolic EDCs, and also opens a new perspective in developing functionalized cationic adsorbent.

Construction of controlled hyper-crosslinked nanofibrous tubes for Cr(VI) removal: Response surface, kinetics, and isotherm.

Porous organic polymers (POPs) exhibit significant potential for adsorbing toxic metal ions in wastewater. Developing POPs with controlled morphologies is a pivotal direction in this field. This study synthesized a series of novel hyper-crosslinked nanofibrous tubes designated HCNT-Cn (n = 4, 8, 12, 16) via Friedel-Crafts alkylation and quaternization reactions. These reactions were fine-tuned through a post-synthetic strategy involving varying alkyl chain lengths. These materials were characterized using FT-IR, SEM, N2 adsorption-desorption isotherms, among others, and they were specifically evaluated for their ability to adsorb Cr(VI). Among the variants, HCNT-C4 exhibited the highest specific surface area (495.26 m2 g-1), superior hydrophilicity (CA = 48.7°), and optimal adsorption performance. The adsorption kinetics of HCNT-C4 conformed to a pseudo-second-order model, while its adsorption isotherm aligned with the Langmuir model. An investigation into the impact of Cr(VI) removal was conducted using three independent variables in a Central Composite Design (CCD) response surface model, revealing that under optimal conditions, the Cr(VI) removal efficiency reached 98%. Additionally, a mechanism for Cr(VI) adsorption on HCNT-C4 was proposed. It was also found that HCNT-C4 could be reused up to four times, maintaining a removal efficiency of 70%. This study suggests potential applications for removing Cr(VI) from contaminated wastewater.

Sea Cucumber-Inspired Polyurethane Demonstrating Record-Breaking Mechanical Properties in Room-Temperature Self-Healing Ionogels.

Practical applications of existing self-healing ionogels are often hindered by the trade-off between their mechanical robustness, ionic conductivity, and temperature requirements for their self-healing ability. Herein, this challenge is addressed by drawing inspiration from sea cucumber. A polyurethane containing multiple hydrogen-bond donors and acceptors is synthesized and used to fabricate room-temperature self-healing ionogels with excellent mechanical properties, high ionic conductivity, puncture resistance, and impact resistance. The hard segments of polyurethane, driven by multiple hydrogen bonds, coalesce into hard phase regions, which can efficiently dissipate energy through the reversible disruption and reformation of multiple hydrogen bonds. Consequently, the resulting ionogels exhibit record-high tensile strength and toughness compared to other room-temperature self-healing ionogels. Furthermore, the inherent reversibility of multiple hydrogen bonds within the hard phase regions allows the ionogels to spontaneously and efficiently self-heal damaged mechanical properties and ionic conductivity multiple times at room temperature. To underscore their application potential, these ionogels are employed as electrolytes in the fabrication of electrochromic devices, which exhibit excellent and stable electrochromic performance, repeatable healing ability, and satisfactory impact resistance. This study presents a novel strategy for the fabrication of ionogels with exceptional mechanical properties and room-temperature self-healing capability.

Scanning Electron Microscopy (SEM) Evaluation of the Ultrastructural Effects on Conjunctival Epithelial Cells of a New Multiple-Action Artificial Tear Containing Cross-Linked Hyaluronic Acid, Cationic Liposomes and Trehalose.

The authors performed an ex vivo and in vivo evaluation of the ultrastructural effects on the conjunctival epithelial cells of a new multiple-action tear substitute containing cross-linked hyaluronic acid, lipids and trehalose (Trimix®), using scanning electron microscopy (SEM) with conjunctival impression cytology. The ex vivo study highlights the persistence and distribution of the product at 5 and 60 min on a monolayer of conjunctival epithelial cells and an increase in microvilli density at the 60 min evaluation. In vivo examination was conducted on three subjects with different grades of ocular surface inflammation, treated with one drop of the product twice daily for thirty days. At the baseline (T0) and twelve hours after the last administration of the tear drop (T30), impression cytology of the upper bulbar conjunctiva for SEM evaluation of conjunctival epithelial cells was carried out. Slit lamp examination (SLE), corneal and conjunctival Fluotest, tear film break-up time (TBUT), and ocular surface disease index (OSDI) questionnaires were also performed to correlate the ultrastructural results with the clinical findings. After 30 days of treatment, a significant improvement in all clinical and symptomatic parameters and in the condition of the ocular surface was detected, with microvillar regeneration and strengthening in all the patients, and a complete restoration in 2/3 of them. The persistence and distribution of the product on the epithelial cells was also noted 12 h after the last administration. The results, therefore, suggest a marked epitheliotropic effect along with a high residence time of the tear substitute.

[Long-term computed tomographic osteolytic analysis of highly cross-linked polyethylene prosthesis after total hip arthroplasty].

Objective: To analyze the occurrence of osteolysis in total hip arthroplasty (THA) with highly cross-linked polyethylene prosthesis during a follow-up of more than 15 years. Methods: The clinical data of 84 patients (105 hips) treated with THA in the Affiliated Hospital of Kanazawa Medical University in Japan between June 2000 and April 2004 and met the selection criteria was retrospectively analyzed. There were 7 males and 77 females, aged from 41 to 75 years, with an average of 56.4 years. There were 94 hips with secondary hip osteoarthritis, 4 hips after pelvic osteotomy, 2 hips with primary hip osteoarthritis, 2 hips with traumatic hip osteoarthritis, 2 hips with osteonecrosis of the femoral head, and 1 hip with rheumatoid arthritis. According to Crowe classification, there were 79 hips of type Ⅰ, 19 hips of type Ⅱ, 6 hips of type Ⅲ, and 1 hip of type Ⅳ. The highly cross-linked polyethylene acetabular liner combined with a 26 mm zirconia femoral head were used in all patients. X-ray films were taken after operation to analyze the radiation transmission and osteolysis around the acetabular prosthesis. The vertical distance (the distance between the teardrop line at the lower edge of the pelvis and the perpendicular line of the hip rotation center), the horizontal distance (the horizontal distance between the hip rotation center and the interteardrop line and the vertical line at the lower edge of the teardrop), and the acetabular cup anteversion angle were measured at last follow-up. The acetabular and femoral osteolysis was analyzed by CT scan and three-dimensional multiplanar reconstruction (3D-MPR). Combined with X-ray film and CT results, osteolysis was evaluated according to the Narkbunnam score. Results: Deep vein thrombosis of lower limbs occurred in 2 cases. All patients were followed up 15-18 years, with an average of 15.9 years. One hip dislocation and 1 periprosthetic fracture occurred postoperatively, and no acetabular loosening or prosthetic lining ruptures occurred. Except for 1 patient who had a radiolucent line in the acetabulum after operation, the other 83 patients did not show any radiolucent line in the acetabulum or the femur. None of the patients underwent hip revision. X-ray films at last follow-up showed an acetabular cup anteversion angle of -10°-39°, with an average of 22°; a vertical distance of 3.5-47.1 mm, with an average of 24.6 mm; and a horizontal distance of 22.6-48.1 mm, with an average of 31.7 mm. There was no acetabular or femoral osteolysis in all patients on X-ray films and CT 3D-MPR images at last follow-up, and the Narkbunnam score was 0 in any region. Conclusion: Highly cross-linked polyethylene prosthesis does not increase the risk of long-term complications such as osteolysis after THA.

Smart Window with Reversible and Instantaneous Photoluminescence based on Microsphere Structure.

A smart window that dynamically regulates light transmittance is crucial for modern life end-users and promising for on-demand optical devices. The advent of three-dimensional (3D) photonic crystal microspheres has enriched the functions of a smart window. However, the smart window formed by polymer microspheres encounters poor mechanical strength and microstructural defects. Herein, to solve this limitation, we report the microsphere-based smart window composed of tightly packed cross-linked polymer microspheres (as a precursor) containing organic photochromic dyes, followed by compression under a high elastic state. When excited under an ultraviolet supply, our smart window showed a rapid and reversible fluorescent photoluminescence without fatigue (50 cycles). Moreover, the bulk devices with a microsphere cross-linked network structure enable excellent mechanical strength (hardness reached 0.158 GPa) and visible-light transparency. Interestingly, a QR code can be recognized under visible light exposure but not under ultraviolet light exposure because of photoluminescence of the smart window. Our method generally provided a paradigm for various amorphous polymers, which can be regarded as a simple and effective approach to build a versatile strategy to introduce an ideal marketplace with economic and community benefits.

Molecule-Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery.

The risk of flammability is an unavoidable issue for gel polymer electrolytes (GPEs). Usually, flame-retardant solvents are necessary to be used, but most of them would react with anode/cathode easily and cause serious interfacial instability, which is a big challenge for design and application of nonflammable GPEs. Here, a nonflammable GPE (SGPE) is developed by in situ polymerizing trifluoroethyl methacrylate (TFMA) monomers with flame-retardant triethyl phosphate (TEP) solvents and LiTFSI-LiDFOB dual lithium salts. TEP is strongly anchored to PTFMA matrix via polarity interaction between -P = O and -CH2CF3. It reduces free TEP molecules, which obviously mitigates interfacial reactions, and enhances flame-retardant performance of TEP surprisingly. Anchored TEP molecules are also inhibited in solvation of Li+, leading to anion-dominated solvation sheath, which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface layers. Such coordination structure changes Li+ transport from sluggish vehicular to fast structural transport, raising ionic conductivity to 1.03 mS cm-1 and transfer number to 0.41 at 30 °C. The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm-2, and 4.2 V LiCoO2|SGPE|Li battery delivers high average specific capacity > 120 mAh g-1 over 200 cycles. This study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

Cross-linking Arenga pinnata starch and chitosan by citric acid: Structure and properties.

In order to improve the processing and digestibility of the Arenga pinnata (Wurmb.) Merr. starch (APS), low concentration citric acid (CA) and chitosan (CS) were used for dual modification. The purpose of this study was to prepare APS and CS complexes with CA, the complexes (CA-CS-APS) physicochemical properties were investigated. The short-range ordered structure (DO), double helix structure (DO) and relative crystallinity (RC) were decreased; CA-CS resulted in the surface roughness of APS, but the particle integrity was preserved; the particle size of CA-CS-APS was increased. Compared with APS, the peak viscosity of CA-CS-APS was decreased from 2534 cP to 27 cP; CA-CS reduced the swelling power of APS, CA3%-CS-APS decreased from 19.00 g/g to 8.17 g/g. The gelatinization enthalpy was decreased after CA-CS modification from 3.25 J/g to 0.55 J/g. CA-CS-APS exhibits higher storage modulus and loss modulus (2067 Pa and 80 Pa). CA-CS significantly improved the anti-digestibility of APS, and the resistant starch (RS) content was increased from 32 % to 39 %. This study provided a simple and effective way to prepare modified starch, which had the potential as food additives or used as a base material for film preparation.

Synthesis and characterization of chitosan Schiff base grafted with formaldehyde and aminoethanol: As an effective adsorbent for removal of Pb(II), Hg(II), and Cu(II) ions from aqueous media.

Grafted chitosan materials show the characteristics of high stability, easy separation and recovery, and good heavy metal adsorption capacity, and have received much attention in the adsorption process. Therefore, in this work, novel grafted chitosan-based adsorbent CS-EHBSB@F-AE was prepared by a one-pot reaction of chitosan (CS), 3-ethoxy-4-hydroxybenzaldehyde (EHB), formaldehyde (F) and aminoethanol (F). The microstructure and morphology of the as-prepared composite CS-EHBSB@F-AE were characterized by FT-IR, TGA, DSC, FE-SEM, and BET analyses. The adsorption performance of the as-prepared CS-EHBSB@F-AE composite on Pb(II), Hg(II), and Cu(II) ions from aqueous was investigated using batch experiment and the effects of the initial pH of the solution, contact time, and initial metal ions concentration and temperature on the adsorption efficiency were investigated and discussed. At the best conditions, CS-EHBSB@F-AE exhibited remarkable adsorption capacity of 246.7 mg/g, 203.9 mg/g, and 234.4 mg/g in absorbing Pb(II), Hg(II), and Cu(II), respectively. The adsorption equilibrium and the kinetic studies confirmed that the ions adsorption process fits well with the Langmuir isotherm and pseudo-second-order (PSO) models. Additionally, the adsorption efficiency of Pb(II), Hg(II), and Cu(II) metal ions by the composite CS-EHBSB@F-AE was reduced by increasing the temperature from 298 K to 318 K. In addition, after the sixth ads/des cycles, the as-prepared adsorbent still exhibited high removal efficiency with a decrease in adsorption efficiency of Pb(II) (5.53 %), Hg(II) (15.43 %) and Cu(II) (8.27 %). Finally, we proposed that the ions adsorption by CS-EHBSB@F-AE has happened using the coordination of active groups containing nitrogen and oxygen atoms on the surface of the adsorbent with the Pb(II), Hg(II), and Cu(II) metal ions.

Vanillin loaded-physically crosslinked PVA/chitosan/itaconic membranes for topical wound healing applications.

Vanillin loaded-physically crosslinked hydrogel membranes made of PVA/chitosan/itaconic acid (PVA-CS-IA) were prepared using freezing-thawing (F-T) cycle method. To ensure the entanglement of PVA-CS-IA chains, three F-T cycles were repeated. The polymeric chains entanglements were confirmed and characterized by different instrumental characterizations. Physicochemical properties for example, swelling ratio, mechanical characteristics, gel fraction percentage (GF%), hydrolytic degradation, and thermal stability of PVA-CS-IA membrane were discussed in detail. The findings showed that the swelling ratio, mechanical characteristics, and hydrolytic degradation of the crosslinked membranes enhanced with increasing CS-IA contents in membranes composition; however, GF% gradually declined with CS-IA content. Additionally, cell viability test using HFB-4 cell line and antimicrobial activity against Staphylococcus aureus and Escherichia coli were evaluated using MTT assay and the bacterium growth inhibition percentage method; respectively. Notably, with varying incubation durations and membrane concentrations, all examined constructed hydrogels showed significant cell survival percentages. The findings supported the notion that produced hydrogel membranes might be used in a professional setting as antibacterial dressings or biomaterials for quick wound healing rate.

Non-surgical treatment of residual periodontal pockets using sodium hypochlorite/amino acid gel and cross-linked hyaluronic acid-a 9-month pilot randomized controlled clinical trial.

OBJECTIVES: This pilot randomized controlled clinical trial compares the clinical outcome obtained in persistent periodontal pockets during 9-month follow-up of supportive periodontal step 4 treatment performed by either combining subgingival instrumentation with adjunctively used sodium hypochlorite/amino acid gel and crosslinked hyaluronic acid (xHyA) or subgingival instrumentation alone. MATERIALS AND METHODS: Study protocol is registered under NCT06438354 at Clinicaltrials.gov. Patients seeking further therapy after completed step 2 non-surgical periodontal treatment underwent either repeated subgingival instrumentation with adjunctive application of sodium hypochlorite/amino acid gel and crosslinked hyaluronic acid (group A) or repeated subgingival instrumentation alone (group B). One calibrated investigator performed the treatment sequence in both groups accordingly. Subgingival instrumentation of the residual pockets was carried out under local anaesthesia using hand- and ultrasonic instruments, as well as air polishing in both groups. Patients were instructed to continue oral hygiene without any restriction. At 3-month re-evaluation treatment was repeated accordingly at sites with persistent 5 mm probing depth and BoP + . Clinical attachment level (CAL), pocket probing depth (PPD), gingival recession (GR), and bleeding on probing (BoP) were recorded at baseline (T1), 3- (T2) and 9-month (T3) post-op, with CAL as a primary outcome measure. RESULTS: In total 52 patients (20 females and 32 males, mean age 58.4 ± 2.4 years) presenting with 1448 sites which required further periodontal treatment were enrolled. Both groups exhibited homogeneity in terms of age, gender, smoking habit, initial number of sites, and BOP. At 9-month evaluation, PD reduction and CAL gain showed significant differences between the test and control group, favouring the adjunctive treatment. GR tended to exhibit more recovery in the test group compared to the control group. Although BOP frequency effectively reduced in both groups, there was no statistically significant difference between the two groups. CONCLUSION: Within the limits of the study, the present data indicates that, during subgingival instrumentation of persistent pockets, the adjunctive usage of sodium hypochlorite/amino acid gel and xHyA sufficiently improves the clinical outcomes. The continuous improvement of CAL in association with the GR scores observed in group A, indicates that sites subjected to adjunctive treatment may indicate a tendency for a regenerative response to treatment within the 9-month follow-up period.

Preparation and characterization of a biomimetic honeycomb cross-linked chitosan membrane and its application in the serum of gastric cancer patients.

Chitosan, as a biological macromolecule with excellent biocompatibility, has great potential for application in immobilized metal affinity chromatography (IMAC) strategies. In-depth analysis of low-abundance phosphopeptides in organisms can help reveal the pathological mechanisms of diseases. Here, we developed an IMAC material based on a biomimetic honeycomb chitosan membrane. The material demonstrates excellent biocompatibility, good hydrophilicity, and strong metal chelating capacity, which collectively confer outstanding enrichment properties. The material has high sensitivity (0.05 fmol), great selectivity (1:2000), excellent cycling stability (at least 10 cycles) and acid-base stability. In addition, the material was employed in human serum, successfully enriching 129 phosphopeptides from the serum of gastric cancer patients and 146 phosphopeptides from healthy controls. Sequence logo suggests a potential association between gastric cancer and glutamine. Ultimately, an in-depth gene ontology analysis was carried out on the phosphopeptides that were enriched in the serum samples. Compared to normal controls, our results demonstrated dysregulated expression of biological process, cellular component, and molecular function in gastric cancer patients. This suggests that the disease involves, such as blood coagulation pathways, cholesterol metabolism, and heparin binding. All experimental outcomes converge to demonstrate the substantial promise of the material for applications within proteomics research.

6-year follow-up on migration outcomes: a randomised clinical trial of cemented vitamin E-stabilised highly crosslinked versus standard polyethylene cup in total hip arthroplasty.

BACKGROUND: In a previous study we have shown that a cemented vitamin E-doped highly cross-linked polyethylene (VEPE) compared to a conventional polyethylene cup in total hip arthroplasty (THA) has a slightly higher proximal migration but significantly lower wear rates up to 2 years after surgery. In this follow-up study we investigated the same cohort at 6 years. METHODS: This was a double-blinded, non-inferiority, randomised controlled trial on patients with osteoarthritis, with a mean age of 66 years. Patients were randomly assigned to receive either the conventional polyethylene cup or the VEPE cup in a 1:1 ratio. The primary endpoint was proximal implant migration of the cup measured with radiostereometric analysis (RSA). Secondary endpoints included wear rate of the cup and patient-reported outcome measurements (PROM). RESULTS: At the 6-year follow-up, 25 patients (11 controls, 14 VEPE) were available for RSA measurements, and we found no statistically significant difference in proximal migration between the VEPE and control groups. The wear rate was significantly lower in the VEPE group compared to controls, 0.03 mm/year and 0.07 mm/year, respectively with a mean difference 0.04 mm, (95% CI, 0.02-0.06 mm). There were no cup revisions and no difference in PROM between the groups. CONCLUSIONS: Based on our 6-year results, the VEPE group exhibited no statistical or clinically relevant difference compared to the control group, and the wear rate was significantly lower in the VEPE group. The use of a cemented vitamin E-doped highly cross-linked cup is a good option in total hip arthroplasty.

Development and characterization of tilapia skin collagen-inulin oleogel as the potential fat substitute in beef patty formulations.

The effects of inulin addition, olive oil content, and ultrasonic treatment on the rheological, texture, and structural properties of collagen-based oleogels were investigated in this study. Furthermore, the fat substitution ability of the oleogel in low-fat beef patties was evaluated. Initially, a uniform and dense network cross-linked structure was found when the ratio of collagen to inulin complex was 1:5. The oleogel sample exhibited good stability and oil binding ability with an additional amount of 50 % olive oil. Ultrasonic treatment improved the stability of the oleogel structure in all samples. Additionally, the addition of inulin reduced cooking loss in beef patties. Beef patties prepared at a 50 % fat substitution level showed physical properties that were the least different from those of pure adipose tissue (control group), which could significantly reduce the content of saturated fatty acids and improve the storage stability of beef patties. This study provided guidance for the application of collagen-inulin oleogel in food processing.

Reconstructive surgical therapy of peri-implant defects with ribose cross-linked collagen matrix and crosslinked hyaluronic acid - a prospective case series.

OBJECTIVE: To investigate the efficacy of ribose-crosslinked collagen (RCLC) matrices functionalized by crosslinked hyaluronic acid (xHya) for reconstructive treatment of class I and III (b-c) peri-implantitis lesions in a transmucosal healing mode. MATERIALS AND METHODS: Thirteen patients presenting with 15 implants were included in this prospective case series. Upon flap reflection, the implants were thoroughly decontaminated employing glycine powder air polishing and adjunctive sodium hypochlorite. For defect augmentation, xHyA was administered to the bony defect walls, exposed implant surfaces, and the RCLC matrix before defect grafting. The full-thickness flap was readapted and sutured around the implant neck for transmucosal healing. Baseline and respective values at the 12 months post-op evaluation were recorded for the clinical parameters peri-implant probing depth (PPD), buccal soft tissue dehiscence (BSTD) and bleeding on probing (BoP). Furthermore, two independent investigators analyzed radiographic changes in the defect area. The mean changes for all variables were analyzed with a paired t-test. RESULTS: The initial mean PPD was 7.2 ± 1.9 mm, and BoP was present in 63% of sites. After 12 months, PPD at the latest visit was 3.2 ± 0.66 mm, which amounted to a respective 3.9 ± 1.85 mm reduction, while the BoP frequency dropped to 10% at all sites. Radiographic bone fill was accomplished for 62.8% of the former defect area, accompanied by a mean MBL gain of 1.02 mm around the treated implants (all p < 0.001). CONCLUSIONS: Within the limits of this case series, we conclude that the proposed treatment sequence substantially improved peri-implant defects and offered a simplified but predictive technique. CLINICAL RELEVANCE: Reconstructive treatment approaches for peri-implantitis are effective but remain non-superior to open flap debridement. Further research on novel biomaterial combinations that may improve reconstructive treatment outcomes are warranted. Ribose-crosslinked collagen matrices biofunctionalized by hyaluronic acid used in this study yield improved clinical and radiographic peri-implant conditions after 12 months.