Effective Parameters for Orthodontic Tooth Movement Acceleration with Photobiomodulation: An Umbrella Review.

Objective: To answer this research question: What are the effective wavelength, power, and energy density parameters for achieving dental movement acceleration? Background Data: Photobiomodulation (PBM) has been clinically studied for its ability to accelerate dental movements in orthodontics. However, its effectiveness is dose dependent. Methods: The search was carried out in PubMed, SCOPUS, and ISI Web of Science. The quality of the included systematic reviews was performed using the AMSTAR 2 tool. The risk of bias was assessed using the ROBIS tool. Results: In total, 29 articles in PubMed, 75 in Scopus, and 61 in ISI Web of Science. Finally, only five systematic reviews were included. Conclusions: The results showed the range from 730 to 830 nm as the most effective range of wavelength to accelerate the orthodontic dental movement. A power range of 0.25-200 mW, with emphasis on the direct correlation between power, wavelength, and energy density. Energy density has not been adequately reported in the most randomized controlled clinical trials.

Tooth movement with dental anchorage vs. skeletal anchorage: A systematic review of clinical trials.

The aim of this study is to compare the time and movement of orthodontic treatment using dental anchorage and skeletal anchorage in adolescent and adult patients with dental malocclusions. A systematic search was conducted in the Embase, PubMed, Lilacs, Cochrane, Trip, and Scopus databases up to October 2022. All the articles were selected using title and abstract, applying the inclusion and exclusion criteria. Disagreements were resolved with a third author. Finally, a full-text selection took place. The data extraction was conducted by two authors who independently evaluated the risk of bias. The methodological quality of the randomized clinical trials was evaluated using the Cochrane tool for the evaluation of the randomized clinical trials. Six articles were included in the data analysis. There were four clinical trials and two randomized clinical trials. A total of 176 patients was obtained with an age range between 14 and 46 years. Four studies showed significant differences when comparing the two anchorages in retraction or distalization of tooth groups, and two showed no differences when using dental and skeletal anchorage for vertical movements; only the articles with vertical movements showed relapse. We can conclude that skeletal anchorage generates precise and stable horizontal movements without overloading or changing the position of the molar. Future studies must incorporate three-dimensional technology for greater clinical accuracy.

Current protocol to achieve dental movement acceleration and pain control with Photo-biomodulation.

When designing a study on dental movement acceleration or pain control during orthodontic treatment, it is crucial to consider effective parameters. The objective of this editorial is to compile the most effective parameters supported by evidence that should be considered in future studies to achieve complete parameter homogenization. The protocol currently recommended to homogenize the parameters and facilitate the development of further meta-analysis in terms of acceleration of movement and pain control in orthodontics is Wavelength: 810 nm, 2.2 J per surface, 0.1 W in continuous mode/0.1 W average power in a super-pulsed, sweeping movement, 1mm from the mucosa, 22 seconds along the vestibular surface and 22 seconds along the lingual surface, the recommended speed of movement is 2 mm/sec, 1 application during each orthodontic control, to achieve dental movement acceleration and repeat the dose at 24 h to ensure pain elimination. The energy density and power density will depend on the spot size used in the equipment and the distance from the mucosa. It will strengthen the evidence of photobiomodulation as the best therapy to accelerate tooth movement and at the same time control the pain produced by orthodontic treatments.

Effect of horizontal slot of maxillary canines' brackets with varying wire angulations - An in vitro study

Abstract A new device was developed to enable the visualization and measurement of canine angulation while at the same time visualizing and measuring the force transmitted to adjacent teeth. This study aimed to evaluate the mesiodistal tilt angle of the upper canine brackets, the wire deflection, and its effects on adjacent teeth with five different slot designs of upper canines. Wires (0.020" and 0.019" x 0.025") were tested on different five bracket types at five different distal angles. The force applied to adjacent teeth was measured as the angle was increased, and its consequences were observed in the posterior and anterior regions as well. The force tension (gf) was measured in a universal testing machine. Data were submitted to a 3-way ANOVA and Tukey's test (α=0.05). For both arches, regardless of the type of tooth and bracket type, the highest means tension mean values were shown by the 20° angle, followed by the 15°,10°, and 5° angles, which differed statistically among themselves. Overall, for 5°, 10°, and 15° angles, conventional and versatile brackets showed significantly higher force values in all teeth, tip-edge and control brackets showed the lowest. The highest force values were observed in central and lateral incisors with conventional and versatile brackets and on first and second premolar teeth with self-ligating passive and control brackets. Conventional brackets presented the highest forces, tip-edge and control brackets showed the lowest. The teeth that suffered the greatest forces were lateral incisors, and those that suffered the least were second premolars.

Resumo Foi desenvolvido um novo dispositivo para permitir a visualização e medição da angulação canina ao mesmo tempo que se visualiza e mede a força transmitida aos dentes adjacentes. Este estudo avaliou o ângulo de inclinação mesiodistal dos braquetes caninos superiores, a deflexão do fio, e os seus efeitos nos dentes adjacentes com cinco diferentes desenhos de ranhuras dos caninos superiores. Os fios (0,020" e 0,019" x 0,025") foram testados em cinco diferentes tipos de braquetes e ângulos distais. A força aplicada aos dentes adjacentes foi medida a medida que o ângulo era aumentado, e as suas consequências foram observadas também nas regiões posterior e anterior. A tensão da força (gf) foi medida em uma máquina de ensaio universal (Instron). Os dados foram submetidos ao teste ANOVA 3 fatores e Tukey (α=0,05). Para ambos os arcos, independentemente do tipo de dente e tipo de braquete, os valores médios de tensão mais elevados foram mostrados pelo ângulo de 20°, seguido pelos ângulos de 15°, 10°, e 5°, que diferiram estatisticamente entre si. Em geral, para ângulos de 5°, 10° e 15°, os braquetes convencionais e versáteis apresentaram valores de força significativamente mais elevados em todos os dentes, braquetes tip-edge e controle apresentaram os mais baixos. Os maiores valores de força foram observados nos incisivos centrais e laterais com braquetes convencionais e versáteis e no primeiro e segundo pré-molares com braquetes auto-ligantes passivo e controle. Os braquetes convencionais apresentaram as forças mais elevadas, os braquetes controle e tip-edge apresentaram os valores mais baixos. Os dentes que sofreram as maiores forças foram os incisivos laterais, e os que sofreram menos foram os segundos pré-molares.

Aplicación del láser de baja potencia para el alivio del dolor en pacientes con tratamiento ortodóncico / Application of low power laser for pain relief in patients with orthodontic treatment

Introducción: El dolor es el principal síntoma que refieren los pacientes después de la colocación y activación de los aparatos ortodóncicos. Objetivo: Evaluar la efectividad del láser de baja potencia en el alivio del dolor en pacientes con tratamiento de ortodoncia. Métodos: Se realizó un estudio cuasiexperimental de intervención terapéutica en 30 pacientes que se encontraban en los inicios de la fase de distalización de los caninos superiores (previa extracción de los primeros premolares de la misma arcada), los cuales fueron atendidos en el Servicio de Ortodoncia del Hospital General Docente Dr. Juan Bruno Zayas Alfonso de Santiago de Cuba, de enero a diciembre de 2020. A tal efecto, se conformaron 2 grupos de forma aleatoria, por el orden de llegada, de 15 integrantes cada uno: el de estudio, que fue tratado con láser de baja potencia, y el de control, que recibió paracetamol como analgésico habitual. Para la validación estadística de la información se emplearon el porcentaje y la prueba de la T de Student para muestras independientes, con 95 % de confiabilidad. Resultados: Existieron diferencias significativas en cuanto a la remisión de la intensidad del dolor, pues el síntoma estuvo ausente o en grado leve en todos los integrantes del grupo de estudio luego de tres sesiones terapéuticas (p=0,00), mientras que solo 13,3 % de los pacientes del grupo de control se ubicaron en estas dos categorías. Conclusiones: Se demostró que la terapia alternativa con láser fue más efectiva para paliar el dolor que el paracetamol.

Introduction: The pain is the main symptom that patients refer after placing and activation of the orthodontic appliances. Objective: To evaluate the effectiveness of the low power laser for pain relief in patients with orthodontics treatment. Methods: A quasi-experiment study of therapeutic intervention was carried out in 30 patients that were in the beginnings of the distancing phase of the upper canine teeth (previous extraction of the same arch first premolars), who were assisted in the Orthodontics Service of Dr. Juan Bruno Zayas Alfonso Teaching General Hospital in Santiago de Cuba, from January to December, 2020. To such an effect, 2 groups were conformed at random, by arrival order, of 15 members each one: the study group that was treated with low power laser, and the control group that received paracetamol as usual analgesic. For the statistical validation of the information the percentage and the Student´s t test were used for independent samples, with 95% of confidence. Results: There were significant differences as for the remission of pain intensity, because absence of this symptom or light pain was observed in all the members of the study group after three therapeutic sessions (p=0.00) while just 13.3 % of the control group patients was located in these two categories. Conclusions: It was demonstrated that the alternative therapy with laser was more effective to palliate the pain than the paracetamol.

Surgical placement of third molars to replace other teeth: "spare wheels" / Mise en place chirurgicale des dents de sagesse en remplacement d'autres dents : « les roues de secours ¼

Introduction: The prognostic improvement for dental auto-transplants is the result of a better understanding in the physiopathology of the periodontium and also of the refining of the technical operative procedure. This fact allows the use of third molars as donor site for the replacement of absent, or first or second badly decayed molars. Discussion: This possible therapy is a supplement argument for the conservation of third molars and their extraction must be indicated only when the anatomic situation presents a pathological risk. Results: If, in adults, it is possible to compare the advantages and disadvantages with the classical implant or prosthetic techniques, it should however be considered as first choice therapy for adolescents and young adults. Indeed, in these cases, the lower risk of root ankylosis avoids passive intrusion and the osteogenic effect of the desmodontium allows normal alveolar bone formation.

Introduction: L'amélioration du pronostic des autogreffes dentaires, envisageable par une meilleure compréhension de la physiopathologie du parodonte et par un affinement de la technique opératoire qui en résulte, permet d'utiliser à bon compte les dents de sagesse comme site donneur dans le remplacement de molaires absentes ou trop fortement délabrées. Discussion: Cette possibilité thérapeutique est un argument supplémentaire à la conservation des dents de sagesse dont l'extraction ne devrait être indiquée que lorsque la situation anatomique de ces dents présente un risque pathologique. Résultats: Si, chez l'adulte, il est possible d'en discuter les avantages et les inconvénients avec les techniques prothétiques et implantaires classiques, les autogreffes dentaires doivent en revanche être considérées comme la solution de choix chez l'adolescent ou le jeune adulte. En effet, dans ces cas, le risque moindre d'ankylose radiculaire évite l'ingression passive de la dent remplacée et l'action ostéogénique de son desmodonte permet une formation normale de l'os alvéolaire qui l'environne.

Maxillary arch development with Invisalign system.

OBJECTIVES: To evaluate tooth movements during maxillary arch expansion with clear aligner treatment. MATERIALS AND METHODS: The study group included 28 subjects (16 females, 12 males, mean age 31.9 ± 5.4 years) collected prospectively from January 2018 to May 2019. Inclusion criteria were European ancestry, posterior transverse discrepancy of 3-6 mm, permanent dentition stage, presence of second permanent molars, mild or moderate crowding, and good compliance with aligners. Treatment protocol included nonextraction strategies, application of Invisalign clear aligner system, and no auxiliaries other than Invisalign attachments. Linear and angular measurements were performed before treatment (T1), at the end of treatment (T2), and on final virtual models (T2 ClinCheck). A paired t-test was used to compare T2-T1 and T2-T2 ClinCheck changes. The level of significance was set at 5%. RESULTS: Statistically significant differences were found for all measurements, except for ones at the upper second molars. The greatest increase in maxillary width was detected at the upper first and second premolars: +3.5 mm for the first premolar and +3.8 mm for the second premolar at T2. Comparison of T2-T1 angular outcomes showed statistically significant changes in the inclinations of all teeth except for the second permanent molars. T2-T2 ClinCheck showed significant differences for both linear and angular measurements for maxillary canines, resulting in poor predictability. CONCLUSIONS: Maxillary arch development revealed a progressive reduction of the expansion rate and buccal tipping in the anterior, lateral, and posterior regions, with the greatest net increase at the first and second premolars. Clinical attention should be paid to maxillary canine movements, and overcorrection should be planned for them during dentoalveolar expansion.

Comparison of 3-dimensional postoperative dental movement in Class III surgical correction with and without presurgical orthodontic treatment.

BACKGROUND: Surgery-first approach (SFA) is an emerging concept that surgically reposition the jaw bones without presurgical orthodontic treatment phase. The study investigated 3D dental movement in the postoperative orthodontic phase with orthodontic-first (OF) and SFA in orthognathic surgery (OGS). METHODS: This study included consecutive 40 patients (20, SF group; 20, OF group) skeletal Class III who underwent 2-jaw OGS correction. The data of cone-beam computed tomography were acquired at 3 stages with the scan of dental models to replace the dentition of the craniofacial images; at before OGS (T0), 1 week after OGS (T1) and at the completion of treatment (T2). The skeletal changes were obtained by overall superimposition. The post-operative dental movement was measured by 3D regional superimposition between T1 and T2. RESULTS: There were no significant difference in the postsurgical orthodontic movement in both groups except significant upper and lower molars extrusion by 2 mm in the SF group. Both groups exhibited no significant difference in mandibular stability in sagittal and vertical directions. The amount of extrusion in the molars was correlated with a postoperative sagittal mandibular forward movement. The total treatment duration was significantly shorter 230 days in the SF group. CONCLUSION: The completion of the orthodontic treatment after OGS in the SFA was mainly accomplished through molar extrusive movement in both arches. The surgical setup of dental occlusion with 4 mm posterior open bite could be corrected during the postsurgical orthodontics in SFA through molar extrusion. The dental occlusion outcome was no different between OF and SFA.

CBCT and Intra-Oral Scanner: The Advantages of 3D Technologies in Orthodontic Treatment.

BACKGROUND: The aim is to demonstrate the validity of the monitoring through intraoral scanner of the dental movements and the real impact, advantages, and convenience, in terms of treatment time and efficiency gain, to frequently monitor a patient with the scanner application. METHODS: A movement control of palatally impacted canines was performed, surgically treated with laser opercolectomy. Three-dimensional models of the patient's dental arch were obtained with intraoral scanner during a monitoring time of 4 months. The STL (Standard Triangle Language) files were superimposed with the 3D models extrapolated from the pre-operative CT (Computerized Tomography). The measurements of eruption, exposed palatal and vestibular areas, and distances between the canines and the incisors were performed, using digital technologies and with a digital caliber. RESULTS: Descriptive and inferential statistical analysis of the data obtained from both conventional and digital monitoring has been realized and performing the T Student Test for paired data. CONCLUSION: The advantages of digital monitoring are numerous, like the possibility to reduce the error of method caused by manual measurement on plaster casts and the possibility to compare the pattern and amount of eruption of the canine in the same patient overtime.

Dental Monitoring Application: it is a valid innovation in the Orthodontics Practice?

AIM: The aim of research is to show the effectiveness of 0.014X0.025 CuNiTi wires in self-ligating straight-wire appliance in the working time of 10 weeks, the treatments are monitored with the Dental Monitoring® Applications. A statistical significance analysis of the correspondence between the results of the first phase of fixed orthodontic treatment (alignment), according to the type of wires used, compared to the time (about 8 weeks) suggested by the manufactory house is therefore useful to fully understand the power of these arches in the orthodontic treatment. MATERIAL AND METHODS: The study provides for the recruitment of 35 cooperating patients with different degrees of crowding, all treated with Damon System(ORMCO), monitoring them through pictures, taken in the Dental Monitoring(DM®) sequence technique, as follows: Time0: Arch-Wire Insertion (0.014x0.025CuNiTi), Time1: Four Weeks, Time2: Eight Weeks, Time3: Ten Weeks. RESULT: The results obtained will be compared with records reported by manufactory house. Our results showed that the manufacture information does not correspond to the real efficiency of the device tested. Statistical Analyses performed by T test student. CONCLUSIONS: In Our experience, applying DM Application with self-ligating technique has reduced in term of number of appointments for each patient from 3 appointments in 10 weeks to 2 appointments, when the indirect bonding was effectuated and when we have inserted a 014X025 CuNiTi. This means that there is a reduction in the mean period of chair time, of material 'costs, number of visits; moreover, there is an increase in term of frequency of patient' s monitoring, resulting in a more precise evaluation of treatment by orthodontist. The limits of the present study are presented by the variable patient's compliance and by the small number of patients. This device is an instrument advantageous for the orthodontist's work. In literature, there are few articles inherent to Digital application Mobile, we will hope that this our experience represents a valid support to a major use of this application in the clinical practice.

A Comparative Assessment of the Efficiency of Orthodontic Treatment With and Without Photobiomodulation During Mandibular Decrowding in Young Subjects: A Single-Center, Single-Blind Randomized Controlled Trial.

Objective: To assess if photobiomodulation (PBM) improves the efficiency of orthodontic treatment with fixed appliance during the alignment stage. Methods: Eighty-nine subjects were included in this trial and randomly assigned for treatment with fixed appliance and PBM group or with fixed appliance only (control group). Inclusion criteria were as follows: (1) age between 13 and 30 years, (2) permanent dentition, (3) class I malocclusion, (4) lower 6-6 mild crowding measured on dental cast, (5) no spaces or diastema in the lower arch, (6) no ectopic teeth, (7) nonextractive treatment plan, and (8) no previous orthodontic treatment. PBM was administered in the PBM group every 14 days using the ATP38® (Biotech Dental, Allée de Craponne, Salon de Provence, France) (72 J/cm2 of fluency for each session). Dental alignment was assessed by visual inspection, and treatment time was defined in days as T2 (date of assessment of complete dental alignment)-T1 (date of brackets bonding). The number of monthly scheduled appointments was also recorded. All the data underwent statistical analysis for comparison between groups. Results: Treatment time was significantly shorter (p < 0.001) in the PBM group (203 days) compared with the control (260 days). Consequently, control visits (p < 0.001) were lower in the PBM group (7) compared with the control group (9). Conclusions: The present findings would confirm that PBM can be used to enhance the efficiency of orthodontic treatment during dental decrowding.

Cambios morfofuncionales en el periodoncio asociados al movimiento dentario por tratamiento ortodóncico / Morfofunctional changes in the periodontium associated to the teeth movement due to orthodontic treatment

Los cambios morfofuncionales que se producen en las estructuras de soporte dentario durante el movimiento ortodóncico involucran procesos bioquímicos, histológicos y fisiológicos. Desde hace más de un siglo, existen disímiles teorías que tratan de explicarlos; sin embargo, todavía se siguen realizando estudios a fin de comprenderlos más a fondo. En la presente comunicación se ofrece una actualización secuencial y resumida de dichos episodios, con el propósito de incrementar el nivel de conocimientos sobre el tema y mejorar la calidad en la atención ortodóncica.

Morfofunctional changes which take place in the supporting structures during the orthodontic movement involve biochemical, histological and physiologic processes. For more than one century, dissimilar theories exist that try to explain to them; however, studies are still being carried out in order to understand them thoroughly. In the present communication a sequential and summarized updating of these episodes, with the purpose of increasing the knowledge on the topic and improving the quality in the orthodontic care.

Reevaluation of the Strain Pressure Theory: Toward a Better Understanding the Biology of Tooth Movement / Reevaluación de la Teoría Presión - Tensión: Hacia una Mejor Comprensión de la Biología del Movimiento Dental

The aim of this report was to analyze the majority of publications referred to orthodontic movement Biological basis, principally strain- pressure theory taking account contemporaneous methodological study designs. The literature published in Pubmed from 1967 to 2014 was reviewed, in addition to well-known scientific reports that were not classified under this database like classical manuscripts since 1839. The comment items are: Limitations of animal models, Histological slices, what to watch for, Rats as an experimental model in orthodontics, Strain­pressure, the force used in these studies that fundament this theory, Reevaluation studies about strain-pressure theory in biology movement using contemporaneous models, Up to date concepts, Theory reevaluation the first step to understanding new acceleration concepts and Movement biology research, present and future. After analyzing those items we concluded: A 3D perspective is essential for a complete understanding of events in tooth movement involves two interrelated processes: the bending of alveolar bone and remodeling of the periodontal tissues. It's important to start, and acknowledge that the PDL cannot be divided into two different areas that react independently to an applied force. It´s a continuous periodontal compartment in OTM, rather than a pressure side and a tension side. When an orthodontic force is applied there are two simultaneous effects that correlate. Alveolar bone flexion and remodeling of the periodontal tissues. Alveolar Bone deformation compromising the main structures (PDL, bone and cement), compression and tension can coexist in different directions. The magnitudes of compression and tension are typically different in different directions. As the majority of research and studies indicate that fundamental movement biology are made on animal models, it is important to know that their results and conclusions, under the actual evidenced based practice guidelines do not allow to make clinical decisions even if they are included on systematic reviews.

El objetivo de esta revisión es analizar la mayoría de las publicaciones relacionadas a la fundamentación sobre el movimiento de ortodoncia, principalmente la teoría presión-tensión, teniendo en cuenta los diseños de estudios metodológicos contemporáneos. Se revisó la literatura publicada en la base de datos de MEDLINE, 1967-2013 , además de los informes conocidos que no fueron clasificados en esta base de datos como manuscritos clásicos desde 1839. Los temas principales en los que se divide el artículo son: Limitaciones de los modelos animales, cortes histológicos, las ratas como modelo experimental en ortodoncia, la fuerza utilizada en los estudios que fundamentan esta teoría, reevaluación sobre los estudios de la teoría presión ­tensión en modelos contemporáneos, conceptos actuales en biología del movimiento, reevaluación de la teoría: el primer paso para entender los nuevos métodos en aceleración del movimiento, conceptos e investigaciones en biología del movimiento: presente y futuro. Una perspectiva 3D es esencial para una comprensión completa de los acontecimientos. El movimiento dental implica dos procesos interrelacionados: la curvatura del hueso alveolar y la remodelación de los tejidos periodontales. Es importante empezar, y reconocer que el PDL no puede ser dividido en dos áreas diferentes que reaccionan de forma independiente a una fuerza aplicada. Está en un compartimiento continuo periodontal , en lugar de un lado de presión y un lado de tensión. Al aplicar una fuerza de ortodoncia hay dos efectos simultáneos: la flexión del hueso Alveolar y la remodelación de los tejidos periodontales. La deformación del hueso compromete las estructuras principales (PDL, hueso y cemento) y la compresión y la tensión pueden coexistir en diferentes direcciones.

Ortodontia lingual acelerada por conticotomia - relato de caso / Lingual orthodontics acelerated by corticotomy - case report

A literatura tem relatado a eficácia da corticotomia na aceleração e redução do tempo do tratamento ortodôntico em até dois terços do tempo habitual de um tratamento convencional. Este relato de caso clínico descreve um tratamento com aparatologia lingual combinada com corticotomia e mostra os resultados após dois anos de acompanhamento, após a finalização do tratamento ativo em um paciente de 19 anos, sexo masculino, caucasiano, com tendência de um padrão esquelético de Classe III (ANB = -2º), uma relação molar de Classe I e discrepância dentária negativa de 5 e 5,5 mm, respectivamente, na maxila e mandíbula. O tratamento consistiu em expansão e desgastes interproximais, combinados com corticotomia. Após dois anos de tratamento, observou-se em superposições tridimensionais obtidas de tomografias computadorizadas, a consolidação do enxerto ósseo e manutenção da saúde gengival. A fase de alinhamento e nivelamento foi razoavelmente rápida, cerca de 6 meses, mas ensaios clínicos randomizados e controlados são necessários para evidenciar a redução do tempo de tratamento ortodôntico em pacientes submetidos à corticotomia, comparados àqueles pacientes submetidos ao tratamento ortodôntico convencional, sem intervenção cirúrgica.(AU)

Corticotomies have been reported to effectively accelerate orthodontic treatment, reducing the time required for conventional orthodontics by two-thirds. This case report describes a treatment with a lingual orthodontics combined with corticotomy in a 19-year-old Caucasian male with Class III skeletal tendency (ANB= -2°), a Class I molar relationship, and dental discrepancy of 5 mm and 5.5 mm in the maxillary and mandibular arches, re-spectively. The treatment was based on arch expansion and interproximal reduction of the enamel, combined with corticotomy. After 2 years of orthodontic treatment, healing of the bone graft and maintenance of the anterior gingiva health were evident in three dimensional computed tomography superimpositions. The alignment and leveling stages were reasonably fast (6 months), but randomized controlled trials are necessary to show evidence of reduction of orthodontic treatment time using a corticotomy-assisted approach and to compare the final treatment results to those of a control group treated with conventional orthodontics, without surgical intervention. (AU)

Dental movement acceleration: Literature review by an alternative scientific evidence method.

The aim of this study was to analyze the majority of publications using effective methods to speed up orthodontic treatment and determine which publications carry high evidence-based value. The literature published in Pubmed from 1984 to 2013 was reviewed, in addition to well-known reports that were not classified under this database. To facilitate evidence-based decision making, guidelines such as the Consolidation Standards of Reporting Trials, Preferred Reporting items for systematic Reviews and Meta-analyses, and Transparent Reporting of Evaluations with Non-randomized Designs check list were used. The studies were initially divided into three groups: local application of cell mediators, physical stimuli, and techniques that took advantage of the regional acceleration phenomena. The articles were classified according to their level of evidence using an alternative method for orthodontic scientific article classification. 1a: Systematic Reviews (SR) of randomized clinical trials (RCTs), 1b: Individual RCT, 2a: SR of cohort studies, 2b: Individual cohort study, controlled clinical trials and low quality RCT, 3a: SR of case-control studies, 3b: Individual case-control study, low quality cohort study and short time following split mouth designs. 4: Case-series, low quality case-control study and non-systematic review, and 5: Expert opinion. The highest level of evidence for each group was: (1) local application of cell mediators: the highest level of evidence corresponds to a 3B level in Prostaglandins and Vitamin D; (2) physical stimuli: vibratory forces and low level laser irradiation have evidence level 2b, Electrical current is classified as 3b evidence-based level, Pulsed Electromagnetic Field is placed on the 4(th) level on the evidence scale; and (3) regional acceleration phenomena related techniques: for corticotomy the majority of the reports belong to level 4. Piezocision, dentoalveolar distraction, alveocentesis, monocortical tooth dislocation and ligament distraction technique, only had case series or single report cases (4(th) level of evidence). Surgery first and periodontal distraction have 1 study at level 2b and corticision one report at level 5. Multiple orthodontic acceleration reports on humans were identified by an alternative evidence level scale, which is a simple and accurate way of determining which techniques are better and have a higher rate of effectiveness. The highest level of evidence for a specific procedure to accelerate orthodontic dental movement up to October 2013 was surgery first followed by low level laser application, corticotomy and periodontal distraction located on level 2, recommendation grade b from this proposed scientific evidence-based scale.

Mechanical properties of NiTi and CuNiTi shape-memory wires used in orthodontic treatment. Part 1: stress-strain tests.

OBJECTIVE: This research aimed to compare, through traction tests, eight types of superelastic and heat-activated NiTi archwires, by six trade companies (GAC, TP, Ormco, Masel, Morelli and Unitek) to those with addition of copper (CuNiTi 27°C and 35°C, Ormco). METHODS: The tests were performed in an EMIC mechanical testing machine, model DL10000, capacity of 10 tons, at the Military Institute of Engineering (IME). RESULTS: The results showed that, generally, heat-activated NiTi archwires presented slighter deactivation loadings in relation to the superelastic ones. Among the archwires that presented deactivation loadings biologically more adequate are the heat-activated by GAC and by Unitek. Among the superelastic NiTi, the CuNiTi 27°C by Ormco were the ones that presented slighter deactivation loadings, being statistically (ANOVA) similar to the ones presented by the heat-activated NiTi archwires from Unitek. When compared the CuNiTi 27°C and 35°C archwires, it was observed that the 27°C presented deactivation forces of, nearly, ⅓ of the presented by the 35°C. CONCLUSIONS: It was concluded that the CuNiTi 35°C archwires presented deactivation loadings biologically less favorable in relation to the other heat-activated NiTi archwires, associated to lower percentage of deformation, on the constant baselines of deactivation, showing less adequate mechanical behavior under traction, in relation to the other archwires.

Mechanical properties of NiTi and CuNiTi shape-memory wires used in orthodontic treatment. Part 1: stress-strain tests

OBJECTIVE: This research aimed to compare, through traction tests, eight types of superelastic and heat-activated NiTi archwires, by six trade companies (GAC, TP, Ormco, Masel, Morelli and Unitek) to those with addition of copper (CuNiTi 27ºC and 35ºC, Ormco). METHODS: The tests were performed in an EMIC mechanical testing machine, model DL10000, capacity of 10 tons, at the Military Institute of Engineering (IME). RESULTS: The results showed that, generally, heat-activated NiTi archwires presented slighter deactivation loadings in relation to superelastic. Among the archwires that presented deactivation loadings biologically more adequate are the heat-activated by GAC and by Unitek. Among the superelastic NiTi, the CuNiTi 27ºC by Ormco were the ones that presented slighter deactivation loadings, being statistically (ANOVA) similar, to the ones presented by the heat-activated NiTi archwires by Unitek. When compared the CuNiTi 27ºC and 35ºC archwires, it was observed that the 27ºC presented deactivation forces of, nearly, ⅓ of the presented by the 35ºC. CONCLUSION: It was concluded that the CuNiTi 35ºC archwires presented deactivation loadings biologically less favorable in relation to the other heat-activated NiTi archwires, associated to lower percentage of deformation, on the constant baselines of deactivation, showing less adequate mechanical behavior, under traction, in relation to the other archwires.

OBJETIVO: o objetivo dessa pesquisa foi comparar, por meio de ensaios de tração, oito tipos de fios de NiTi superelásticos e termoativados, de seis empresas comerciais (GAC, TP, Ormco, Masel, Morelli e Unitek) àqueles com adição de cobre (CuNiTi 27ºC e 35ºC, da ORMCO). MÉTODOS: os ensaios foram realizados em máquina de ensaios mecânicos, da marca EMIC, modelo DL10000, de 10 toneladas de capacidade, no Instituto Militar de Engenharia (IME). RESULTADOS: os resultados mostraram que, de forma geral, os fios de NiTi termoativados apresentaram cargas mais suaves de desativação que os superelásticos. Entre os fios que apresentaram as cargas de desativação biologicamente mais adequadas, estão os termoativados da GAC e da Unitek. Entre os fios de NiTi superelásticos, os de CuNiTi 27ºC da Ormco foram os que apresentaram as cargas mais suaves de desativação, sendo estatisticamente semelhantes (ANOVA) às apresentadas pelos fios de NiTi termoativados da Unitek. Quando comparados os fios de CuNiTi 27ºC aos de 35ºC, observou-se que os primeiros apresentaram forças de desativação de, aproximadamente, ⅓ das apresentadas pelos últimos. CONCLUSÃO: conclui-se que os fios de CuNiTi 35ºC apresentaram cargas de desativação biologicamente menos favoráveis em relação aos demais fios de NiTi termoativados, sendo associadas a percentuais inferiores de deformação, nos patamares constantes de desativação, demonstrando comportamento mecânico, sob tração, menos adequado em relação aos demais fios.

Eficiência rotacional dos bráquetes autoligantes em relação aos convencionais / Rotational effi ciency of self-ligating brackets compares to conventionals

O presente estudo teve como objetivo comparar a eficiência e o desempenho debráquetes na produção do movimento rotacional. Para esse fim foram utilizados: bráquete convencional Ovation (GAC) com ligadura elástica; bráquetes autoligantes interativos In-Ovation R(GAC) e BioQuick (Forestadent); bráquete autoligante passivo Damon 2 (Ormco). Para padronizar o experimento foi criado um simulador de movimento dentário rotacional, composto por três pinos metálicos, dois fixos e um móvel, imerso em cera, onde foram fixados os corposde prova com os diferentes tipos de bráquetes. O pino móvel foi rotacionado 30 graus. A simulação da correção da rotação dental foi realizada inicialmente com o fio 0,016" NiTi e, na sequência, com o fio 0,018" NiTi. As amostras foram testadas individualmente comtemperatura externa constante e de forma idêntica, sendo que os testes foram repetidos dez vezes para cada amostra, registrando a quantidade de rotação em relação ao tempo. Os resultados colhidos foram tratados estatisticamente por meio da análise de variância, utilizando o delineamento em medidas repetidas, complementado pelo Teste de Comparações Múltiplas de Tukey, com nível de significância de 5%. Ao final das tomadas de tempo,os resultados do estudo demonstraram maior controle e eficiência na correção da rotação dental quando da utilização dos bráquetes autoligantes interativos BioQuick (Forestadent), seguido pelo In-Ovation R (GAC), Damon 2 (Orrnco) e por fim pelo bráquete convencional Ovation (GAC) com ligadura elástica.

The present study had as objective to compare the effi ciency and the performance of brackets to produce rotational movement. For this they had been used: conventional bracket Ovation (GAC) with elastic ligature; interactive self-ligating brackets In-Ovation R (GAC) and BioQuick (Forestadent); and passive self-ligating bracket Damon 2 (ORMCO). To standardize the experiment a simulator of rotational dental movement was created, composed on three metallic pins, two fi xed and one mobile, immersed in wax, where the bodies of test with the different types of brackets were fi xed. The mobile pin was rotated 30 degrees. The simulation of the correction of dental rotation was initially performed with 0,016’’ NiTi wire and following with 0,018’’ NiTi wire. The samples were tested individually with constant external temperature and identical form, being that the tests were repeated ten times for each sample, registering the amount of rotation in relation to the time. The harvested results were dealt statitically with variance analysis using the delineation in repeated measures, complemented for the Tukey’s Comparisons Multiple Test, to level of significance of 5%. In the end of taking times, the results of the study demonstrated greater control and effi ciency in the correction of the dental rotation when self-ligating bracket BioQuick was used, followed by In-Ovation R, Damon 2 and fi nally by the conventional model Ovation.

Modificações no periodonto de ratos diabéticos após a movimentação ortodôntica / Periodontal ligament changes after induced dental movement in diabetic rats

OBJETIVOS: o objetivo deste trabalho foi avaliar as modificações do ligamento periodontal de incisivos de ratos diabéticos submetidos a forças ortodônticas. MÉTODOS: vinte ratos machos Wistar (Rattus norvegicus) com 105 dias de idade foram empregados. Os ratos foram divididos em quatro grupos: C - animais normoglicêmicos não submetidos à movimentação dentária; CAO - animais normoglicêmicos submetidos à movimentação dentária; D - animais diabéticos não submetidos à movimentação dentária; DAO - animais diabéticos submetidos à movimentação dentária. Os animais permaneceram com o dispositivo de movimentação dentária por 5 dias. Foram avaliados o número de vasos sangüíneos e a espessura do ligamento periodontal nos terços cervical, médio e apical dos cortes histológicos. RESULTADOS E CONCLUSÕES: no lado de tensão, a movimentação dentária nos animais do grupo CAO resultou em um ligamento periodontal mais espesso (17,64 por cento no terço apical, 39,28 por cento no terço médio e 51,35 por cento na região cervical), quando comparado ao grupo C (p < 0,05 para os terços médio e cervical). No grupo DAO, o aumento da espessura do ligamento periodontal foi 50,55 por cento (terço apical), 48,14 por cento (terço médio) e 50 por cento (terço cervical) maior que nos animais do grupo D (p < 0,05). O número de vasos sanguíneos encontrados no ligamento periodontal não apresentou diferenças estatisticamente significantes quando todos os grupos foram comparados (p > 0,05). Ainda no lado de tensão, foram observadas lacunas de reabsorção nos animais dos grupos CAO, D e DAO. O lado de pressão não foi examinado nesta fase do estudo.

AIM: The aim of this study was to evaluate the periodontal ligament changes after induced dental movement of the upper incisor in diabetic rats. METHODS: Twenty Wistar rats (Rattus norvegicus) with 105 days of age were used. The rats were divided in four groups: C - normoglicemic animals not submitted to dental movement; CAO - normoglicemic animals submitted to dental movement; D - diabetic animals not submitted the dental movement; DAO - diabetic animals submitted to dental movement. The animals had remained with dental movement devices during 5 days. The number of sanguine vessels and the thickness of the periodontal ligament were evaluated at cervical, medium and apical histological cut regions. RESULTS AND CONCLUSION: At tension side, the dental movement in the animals of group CAO resulted in a thicker periodontal ligament (17.64 percent apical, 39.28 percent medium, 51.35 percent cervical) when compared to C group (p < 0.05 for medium and cervical area). Group DAO exhibited an increase of periodontal ligament thickness of 50.55 percent (apical), 48.14 percent (average) and 50 percent (cervical) when compared to group D (p < 0.05). The periodontal ligament sanguine vessels number did not differed significantly for all groups (p < 0.05). At tension side, bone reabsorption lacunae were observed in CAO, D and DAO groups. The pressure side was not examined in this study phase.