Edible structuring agent shaped via interfacial precipitation on solid template: Crosslinked starch colloidosome.

Water-permeable hollow starch particles alter the rheological behavior of their granular suspensions. However, their thin shells can rupture limiting applications. In this study, we used amaranth starch as building blocks (1 µm) to craft a crosslinked superstructure. Pickering emulsions were used as the templates where starch coated the droplets. Emulsions were heated at 75 °C to induce interpenetration of the polymers followed by precipitation in ethanol to trigger colloidal fusion. Particles were then crosslinked by sodium tri-metaphosphate; hollow particles formed after the interior template was removed by hexane. When canola oil was used, the particles ruptured at pH 11.5 due to the repulsion between the strands. In contrast, palm oil, emulsified at 50 °C, formed a rigid core after cooling, locked the starch at the surface and retained the structure. The crosslinked colloidosomes were larger (89 µm) and exhibited higher viscosity, and stronger stability. Larger particles (>100 µm) were produced using higher templating volume. Gentle centrifugation to harvest the particles kept the shells intact. The hollow structure exhibited jamming transition above 10 w/w%, which could serve as a super-thickener. This work demonstrates that microarchitecture plays a critical role in shaping material functionality.

All-aqueous synthesis of alginate complexed with fibrillated protein microcapsules for membrane-bounded culture of tumor spheroids.

Water-in-water (W/W) emulsions provide bio-compatible all-aqueous compartments for artificial patterning and assembly of living cells. Successful entrapment of cells within a W/W emulsion via the formation of semipermeable capsules is a prerequisite for regulating on the size, shape, and architecture of cell aggregates. However, the high permeability and instability of the W/W interface, restricting the assembly of stable capsules, pose a fundamental challenge for cell entrapment. The current study addresses this problem by synthesizing multi-armed protein fibrils and controlling their assembly at the W/W interface. The multi-armed protein fibrils, also known as 'fibril clusters', were prepared by cross-linking lysozyme fibrils with multi-arm polyethylene glycol (PEG) via click chemistry. Compared to linear-structured fibrils, fibril clusters are strongly adsorbed at the W/W interface, forming an interconnected meshwork that better stabilizes the W/W emulsion. Moreover, when fibril clusters are complexed with alginate, the hybrid microcapsules demonstrate excellent mechanical robustness, semi-permeability, cytocompatibility and biodegradability. These advantages enable the encapsulation, entrapment and long-term culture of tumor spheroids, with great promise for applications for anti-cancer drug screening, tumor disease modeling, and tissue repair engineering.

Emulsion-Based Multiscale Structural Design Realizes Lightweight and Superelastic Graphene Aerogels for Electromagnetic Interference Shielding.

Ultralight graphene aerogels with high electrical conductivity and superelasticity are demanded yet difficult to produce. A versatile emulsion-based approach is demonstrate to optimize multiscale structure of lightweight, elastic, and conductive graphene aerogels. By constructing Pickering emulsion using graphene oxide (GO), poly (amic acid) (PAA), and octadeyl amine (ODA), micron-level close-pore structure is realized while thermal shrinkage mismatch between GO and PAA creates numerous nanowrinkles during thermal annealing. GO nanosheets are bridged by PAA-derived carbon, enhancing the structural integrity at molecular level. These multiscale structural features facilitate rapid electron transport and efficient load transfer, conferring graphene aerogels with intriguing mechanical and electromagnetic interference (EMI) shielding properties. The emulsion-based graphene aerogel with an ultralow density of ≈3.0 mg cm-3 integrates outstanding electrical conductivity, air-caliber thermal insulation, high EMI shielding effectiveness of 75.0 dB, and 90% strain compressibility with superb fatigue resistance. Intriguingly, thanks to the gel-like rheological behavior of the emulsion, ultralight graphene scaffolds with programmable geometries are obtained by 3D printing. This work provides a general approach for the preparation of ultralight and superelastic graphene aerogels with excellent EMI shielding properties, showing broad application prospects in various fields.

Encapsulation of Hydrophobic-but-Not-Lipophilic Perfluoro Liquids Based on a Self-Assembled Double Emulsion Template via Solvent Evaporation Method.

The facile encapsulation of perfluoro liquids that are hydrophobic but not lipophilic into liposomes or microcapsules presents a significant challenge in the fields of biomedicine, dynamic optics, functional chemical applications, etc. This is due to their chemical inertness and physical immiscibility, particularly those with low boiling points. In this study, a novel strategy based on a double emulsion template via solvent evaporation is proposed after investigating the mechanism of three-phase emulsion systems. The perfluoro liquid droplets can be easily emulsified into a polymer solution as the second emulsion layer, where the polymer shell is formed during solvent evaporation in the continuum medium under proper processing controls. The morphology of particles is predictable and fits well with the linear model derived from Neumann's triangle in three-phase systems. Furthermore, a comprehensive study on the encapsulation of perfluoro ketone, which is widely used as a green fire extinguisher agent, is conducted as an example. The encapsulated perfluoro ketone showed instant thermal response upon heating while maintaining a good shelf life at room temperature. The remarkable fire suppression performance exhibited great potential for practical applications. This work offers more insight into the encapsulation of "naughty" perfluorinated chemicals and provides more possibilities for extended applications.

Effects of Flammulina velutipes powder on the emulsion properties of chicken myofibrillar protein under low-salt conditions.

This study aimed to investigate the influence of varying concentrations of Flammulina velutipes powder (FVP) (0, 4, 8, 12, 16, and 20 g L-1, based on FVP weight per liter of emulsion) on the stability, rheological properties, microstructure, and interfacial protein content of chicken myofibrillar protein (MP) emulsions under low-salt conditions. Visual assessment and the Turbiscan stability index revealed that the stability of MP emulsions improved with increasing FVP concentration. The greatest stability was achieved when the FVP concentration was 16 gL-1. The incorporation of FVP enhanced the elasticity and viscosity of the emulsions by forming a dense three-dimensional network structure. The droplet size of the emulsions initially decreased and then increased with increasing FVP concentration. The addition of FVP increased the amount of protein absorbed by the emulsion layer. Flammulina velutipes powder is promising as a stabilizer that could improve the emulsifying and functional properties of low-salt myofibrillar protein emulsions. © 2024 Society of Chemical Industry.

Characterization and In vitro Release & In vivo Behavior Study of Self-Assembled Nano-Emulsion in XiaoYao Pill for Enhanced Drug Delivery.

BACKGROUND: Traditional Chinese medicine formulations often contain hydrophobic components with limited solubility and stability, leading to low oral bioavailability. Self-assembled nanoparticles (SANs) have shown promise in enhancing oral bioavailability of these components. However, whether un-decocted Chinese herbal pellets can generate SANs and the impact of SANs formed by multiple components on pharmacokinetic parameters remains unexplored. METHODS: In this study, single-factor approach was employed to determine the optimal separation method of nano-emulsion phase of XiaoYao pill (N-XY). Morphological and particle size analyses confirmed the nanoscale nature of N-XY. High-performance liquid chromatography (HPLC) fingerprint analysis was conducted to compare the distribution of active ingredients among three different phases of XiaoYao pill (XY pill). In vitro release studies were performed to evaluate the release mechanism of four ingredients from N-XY. Additionally, in vivo pharmacokinetics and tissue distribution behaviors were investigated in rats. RESULTS: N-XY exhibited uniform and stable characteristics as a water-in-oil (O/W) nano-emulsion. Fingerprint analysis identified 25 characteristic peaks and 8 key ingredients in N-XY, with the highest peak areas. In vitro release studies showed a sustained release behavior of N-XY. The pharmacokinetics study showed that the ferulic acid of N-XY had a 1.37-fold higher AUC, 1.44-fold lower Vd/F, 1.39-fold lower CL/F, and a prolonged t1/2 than A-XY, indicating enhanced bioavailability due to reduced elimination. Furthermore, the tissue distribution revealed that the levels of paeoniflorin and ferulic acid from N-XY significantly increased in liver, spleen, lungs, uterus and ovaries, exhibiting targeting characteristics. CONCLUSION: This study comprehensively explored the formation, characterization, and pharmacokinetics of nano-emulsion in XY pill, introducing novel perspectives and initiating preliminary research on potential SANs in un-decocted traditional Chinese medicine formulations. It also emphasized the importance of enhancing pharmacokinetics of hydrophobic components in Chinese herbal formulations and laid the foundation for future nano-formulation research for XY pill.

Study on encapsulation of Lactobacillus plantarum 23-1 in W/O/W emulsion stabilized by pectin and zein particle complex.

This study was conducted to develop a W/O/W emulsion encapsulated Lactobacillus plantarum 23-1 (LP23-1) to significantly enhance the survival rate of LP23-1 under simulated digestion and storage conditions. The zein particles and pectin formed a complex through electrostatic interaction and hydrogen bonding. When the proportion of zein particles to pectin was 1:1, the emulsifying stability index (ESI) was 304.17 %. Additionally, when the proportion of the internal aqueous phase to the oil phase was 1:9, the polyglycerol polyricinoleate (PGPR) concentration was 5 %, the proportion of primary emulsion to the external aqueous phase was 5:5, the zein particles concentration was 4 %, and the proportion of zein particles to pectin was 1:1, the encapsulation rate was the highest at 96.27 %. Cryo-scanning electron microscopy and fluorescence microscopy confirmed the morphology of W/O/W emulsion and successful encapsulation of LP23-1. Furthermore, compared with free LP23-1, the W/O/W emulsion encapsulation significantly improved the survival rate of LP23-1 to 73.36 % after simulated gastrointestinal digestion and maintained a high survival rate of 78.42 % during the 35-day storage. The W/O/W emulsion was found to effectively improve the survival rate of LP23-1 during simulated digestion and storage, which has implications for the development of probiotic functional foods with elevated survival rates.

Effect of cationized guar gum on stability and bioaccessibility of curcumin-loaded Pickering emulsion stabilized by starch nanoparticles.

To enhance stability and bioaccessibility of curcumin in Pickering emulsions stabilized by starch nanoparticles (SNP), cationized guar gum (CGG) was incorporated into the emulsion. Zeta potential results revealed that SNP and CGG formed electrostatic interactions, resulting in stable interfacial layer with higher hydrophobicity. Adding 0.4 % CGG maintained a homogeneous phase without significant droplet size change for up to one month. The emulsion with 0.4 % CGG demonstrated stable storage under varying pH (4-10), ionic strength (0-10 mM NaCl), and freeze-thaw cycles (up to 3). When optimized Pickering emulsion system was applied to curcumin encapsulation, curcumin-loaded emulsions were stably maintained for up to one month. The curcumin retained approximately 100 % stability under thermal (90 °C) and UV (12h) treatments. In the optimized emulsion, starch components resisted digestion in oral and gastroenteric phases but were primarily digested in small intestine, resulting in an increasing bioaccessibility from 88.23 to 96.92 %.

Novel high internal phase emulsion gels stabilized solely by hemp protein isolate: Enhancement of cannabidiol chemical stability and bioaccessibility.

This study aims to fabricate high internal phase emulsion gels (HIPEGs) using modified hemp protein isolates for microencapsulating cannabidiol (CBD) to enhance their chemical stability and bioaccessibility. Importantly, the combined effect of CBD concentrations (0.1 vs 0.5 wt%) and post gel storage conditions (before-refrigeration (BR) vs after-refrigeration (AR)) on the properties of HIPEGs were investigated. The results showed that the CBD concentration above 0.4 % is necessary to fabricate a stable HIPEG. The rheological properties of HIPEGs were influenced by CBD concentration and refrigeration. The AR gels with 0.5 % CBD showed the highest gel strength (up to 91.7 Pa) and solid-like structures. These properties allowed to HIPEGs maintain good physical stability during storage at 4, 25, and 37 °C for 14 days due to the interconnected polyhedral protein matrices and thick interfacial protein layers. These unique protein architectures offered superior protection against CBD degradation (<2 % of initial added amount) for 100 days during exposure to light and temperature (25 or 37 °C). The INFOGEST digestion results showed the BR gels effectively protected CBD during digestion and consequently improved their stability and bioaccessibility up to 95 % and 74 %, respectively. Overall, the fabricated HIPEGs could be valuable for nutraceutical delivery.

Raman spectroscopy and molecular dynamics simulations of protein microgels at the oil-water interface.

The real-time structural changes of the molecular space conformation of myofibrillar protein microgels (MPM) after heat treatment (90 °C, 30 min) were analyzed by molecular dynamics simulation, and the structural properties and changes of MPM at the oil-water interface were analyzed by the combination of Raman spectroscopy and molecular dynamics simulation. The shift in the oil ratio had a major impact on the transformation of disulfide bonds within the protein molecule. Simultaneously, it caused tryptophan and tyrosine residues (I850 cm-1/ I850 cm-1 > 1) to become exposed, increasing the locations of amino acid residues in the protein that interact with the oil phase. HIPE with different oil phases influenced the change in spatial structural conformation of MPM, and there was a flexible structural change in the molecular space. The HIPE system, which was stabilized by 3.0 wt% MPM and 0.75 oil phase, exhibited a thixotropic recovery of >70 % and the highest elastic modulus G' (822.14 Pa) based on the rheological behavior. It is expected to provide a theoretical basis for the development and utilization of high internal phase emulsion stabilized by microgel protein in food industry.

Mechanisms of slow-release antibacterial properties in chitosan­titanium dioxide stabilized perilla essential oil Pickering emulsions: Focusing on oil-water interfacial behaviors.

Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %-3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.

Effect of Paprika Powder on the Antioxidant Capacity of Emulsion-Type Sausages.

Antioxidant activity of freeze-dried paprika powder and storage properties of emulsion-type pork sausages containing diverse concentrations of this powder (0%, 1%, 2%, and 3%) were analyzed. Antioxidant activities of red and yellow paprika powders were analyzed by evaluating their 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric reducing antioxidant power (FRAP), total phenol content (TPC), and total flavonoid content (TFC). The yellow paprika powder exhibited remarkably higher DPPH radical scavenging activity, FRAP values, and TPC than the red paprika powder (p<0.05), while TFC showed no remarkable difference between them (p>0.05). Storage properties of sausages containing the yellow paprika powder were analyzed by evaluating their water holding capacity, cooking yield, and thiobarbituric acid reactive substance (TBARS), and volatile basic nitrogen (VBN) values. The 3% yellow paprika powder group showed remarkably higher water-holding capacity and cooking yield compared to the 0% group (p<0.05). TBARS values were remarkably lower in the 2% and 3% yellow paprika powder groups than in the 0% group at all weeks (p<0.05). VBN value was remarkably lower in the 3% yellow paprika powder group than in the 0% group at all weeks (p<0.05). Overall, addition of 3% yellow paprika powder improved the storage properties of emulsion-type sausages.

Quality Characteristics of Meat Analogs through the Incorporation of Textured Vegetable Protein and Tenebrio molitor Larvae in the Presence of Transglutaminase.

Alternative protein sources with greater nutritional value and a lower environmental footprint have recently attracted interest in the production of meat substitutes. However, it is required that these alternatives mimic the texture and structure of meat. This study investigated varying ratios of textured vegetable proteins (TVP) to Tenebrio molitor larvae (brown mealworm; TM) with the addition of transglutaminase (TG) to determine the quality characteristics of these emulsions. The results demonstrated low protein solubility of the emulsions as TVP content increased. Furthermore, when the proportion of TM was high, the TG-treated emulsion had a low pH. Additionally, when there was a high TM ratio to TVP in the TG treatment, the emulsions demonstrated better thermal stability and water holding capacity. Regarding the rheological properties of the emulsion, both the frequency-dependent storage modulus (G') and loss modulus (G'') increased as the proportion of TVP in the emulsion increased with and without the addition of TG. Differential scanning calorimetry analyses demonstrated two protein denaturation peaks in all treatments, with high peak temperatures for both treatments with a high proportion of TM. The hardness and chewiness of the emulsion were highest in the treatment (T6 and T8) with TG, and the gumminess of the emulsion was greatest when TM only or when equal ratios of TVP and TM were treated with TG, respectively. In conclusion, the addition of TM to TVP with TG improves the overall texture of the protein mixture, making it a suitable meat alternative.

Fabrication of thermo-responsive microcapsule pesticide delivery system from maleic anhydride-functionalized cellulose nanocrystals-stabilized pickering emulsion template.

The overuse of pesticides has shown their malpractices. Novel and sustainable formulations have consequently attracted abundant attention but still appear to have drawbacks. Here, we use a maleic anhydride-functionalized cellulose nanocrystals-stabilized Pickering emulsions template to prepare thermo-responsive microcapsules for a pesticide delivery system via radical polymerization with N-isopropyl acrylamide. The microcapsules (MACNCs-g-NIPAM) are characterized by the microscope, SEM, FTIR, XRD, TG-DTG, and DSC techniques. Imidacloprid (IMI) is loaded on MACNCs-g-NIPAM to form smart release systems (IMI@MACNCs-g-NIPAM) with high encapsulation efficiency (~88.49%) and loading capability (~55.02%). The IMI@MACNCs-g-NIPAM present a significant thermo-responsiveness by comparing the release ratios at 35°C and 25°C (76.22% vs 50.78%). It also exhibits advantages in spreadability, retention and flush resistance on the leaf surface compared with the commercial IMI water-dispersible granules (CG). IMI@MACNCs-g-NIPAM also manifest a significant advantage over CG (11.12 mg/L vs 38.90 mg/L for LC50) regarding activity tests of targeted organisms. In addition, IMI@MACNCs-g-NIPAM has shown excellent biocompatibility and low toxicity. All the benefits mentioned above prove the excellent potential of IMI@MACNCs-g-NIPAM as a smart pesticide formulation.

Effects of mixing ratio on physicochemical, structural properties and application in lycopene-loaded emulsions of blends of whey protein and pea protein.

Physicochemical, structural properties and application in lycopene-loaded emulsions of blends of whey protein isolate (WPI) and pea protein isolate (PPI) at varying mass ratios (100/0, 75/25, 50/50, 25/75, 0/100) were investigated. Data indicated that the mass ratios affected the physical, chemical and storage stability of the emulsion by influencing the particle size, zeta-potential, surface hydrophobicity, free sulfhydryl content, and secondary structure of the blends. Particularly, emulsion with a mixing ratio of 75/25 exhibited superior physical stability against salt concentrations (200 and 500 mM), better chemical stability against UV light and heat, and maintained stability over a 30-day storage period. Emulsions stabilized by blends of different ratios exhibited similar digestion behavior, with no significant differences observed in lycopene's transformation stability and bio-accessibility. Data indicated that substitution of whey protein by pea protein is effective in term of emulsifier application and replacement ratio is an important factor need to be considered.

Oil-in-water emulsion activity and stability of short-term retrograded starches depend on starch molecular size, amylose content, and amylopectin chain length.

BACKGROUND: Natural emulsifiers are increasingly preferred by the food industry to meet consumers' demand for 'clean-label' emulsion products. In the present study, 10 short-term retrograded starches with unique molecular structures were explored to examine the relationships between starch structures and their ability to form stable oil-in-water emulsions. RESULTS: Waxy maize starch showed the largest value of contact angle and conductivity of emulsion, whereas potato and lentil starch showed the lowest value of contact angle and conductivity of emulsion, respectively. Emulsion prepared by rice starch showed the lowest, whereas that of sweet potato starch showed the highest value of viscosity. Consequentially, the emulsion stabilized with waxy maize and tapioca starch showed the smallest and less polydisperse droplets, resulting in a much higher emulsifying index. On the other hand, emulsion prepared with potato starch showed the highest stability compared to other starches. Correlation analysis suggested that starches with larger molecular size, a lower amylose content and shorter amylopectin short chains had a higher emulsification ability, whereas the amount of starch molecular interactions formed during short-term retrogradation revealed no obvious linking to emulsion performances. CONCLUSION: These findings provided food industry with exciting opportunities to develop 'clean-label' emulsions with desirable properties. © 2024 Society of Chemical Industry.

The effects of adding ground terebinth fruits on the emulsification, microstructural, and flow properties of meat emulsions.

The effect of roasted and unroasted terebinth on the colour, emulsion capacity, flow properties, emulsion stability, microstructure, and textural properties of the meat emulsions was researched. The meat emulsions were created by adding the roasted and unroasted terebinth at four concentrations (0.0, 0.1, 0.3, and 0.5%) to the beef. The emulsion capacity and stability increased with the addition of terebinth, and the highest values for the emulsion capacity (233.50 ml oil/g protein) and stability (74.50%) were observed at the terebinth concentration of 0.3%. The emulsion stability and capacity of samples containing roasted terebinth were higher than those of samples containing unroasted terebinth. The viscosities of the samples with roasted terebinth increased with increasing concentration. The pseudo-plasticity increased with the addition of terebinth. As a result, the use of terebinth in high-fat emulsion-type products might be a potential herbal additive to improve its technological and functional properties.

Insights into the soybean protein isolate hydrolysates: Performance characterization, emulsion construction and in vitro digestive behavior.

In this experiment, the co-constructed O/W emulsions of different soy protein hydrolysates (SPHs) and gum arabic (GA) were investigated. SPHs were prepared by hydrolyzing soy protein isolate (SPI) using different enzymes, and investigated the effects of enzyme types and hydrolysis time on the physicochemical properties of SPHs. Moreover, SPI/GA and SPHs/GA were prepared and used as hydrophilic emulsifiers to construct O/W emulsions. The results showed that the optimal hydrolysis times for bromelain, pepsin and trypsin were 2 h (BSPH2), 3 h (PSPH3) and 3 h (TSPH3), respectively. Compared with SPI/GA emulsions, SPHs/GA emulsions had smaller particle size, more negative charge, higher interfacial adsorbed protein, and more stable emulsion systems. During the digestion process, SPHs/GA emulsions were effective in realizing the release of bioactives. In conclusion, enzymatic hydrolysis can be an effective modification technique, and SPHs/GA can be used as an effective emulsifier for the emulsion system.

Pickering emulsion of camellia oil stabilized by Octenyl succinic acid starch: Interaction, lipid oxidation and digestibility.

The application of camellia oil is limited by its susceptibility to oxidation and insolubility in water, particularly under high humidity and temperature conditions. In order to effectively reduce the oxidation rate of camellia oil, prolong the shelf life in order to improve the stability in storage under different conditions, this study encapsulates camellia oil in Pickering emulsions stabilized by Octenyl succinic acid (OSA) starch, achieving a 100-fold reduction in release rate and enhanced lipid oxidation stability. The smooth surface and complete particles of the emulsion were observed and no new chemical bonds were formed. The minimum particle sizes were 1.72 µm and 2.73 µm, when the Pickering emulsion was set at pH 6 and 0.1 M NaCl. In the digestion process, the microstructures observed that Pickering emulsion possessed super stability against oral and gastric digestions, prolonged the release time and improved the bioavailability compared with camellia oil, and the digestibility of the emulsion was 56.16 % within 120 min. All these results indicate that OSA-starch stabilized camellia oil can effectively increase solubility, improve stability and expand the application range.

Fabrication, digestion behavior and ß-carotene bioaccessibility of emulsion-filled double-network gel: Effect of corn fiber gum/soy protein isolate ratio and surfactant types.

Emulsion fortified with ß-carotene was added to corn fiber gum (CFG)/soy protein isolate (SPI) double network gel matrix to obtain emulsion-filled gels (EFG) via dual induction of laccase and glucono-δ-lactone. Protein digestion was accompanied by the release of ß-carotene from gel matrix during in vitro digestion. The surfactant types and corn fiber gum/soy protein isolate ratio affected the ß-carotene bioaccessibility via changing oil-water interfacial composition and emulsion particle size during in vitro digestion. As compared with Tween-20 EFGs, emulsion droplets released from SPI EFGs was more susceptible to flocculation, followed with coalescence due to proteolysis of interfacial SPI during gastric digestion. The resulting oil droplets with large particle size exhibited lower lipase adsorption, thus reducing the free fatty acid content and ß-carotene bioaccessibility. The confocal laser scanning microscope (CLSM) observation confirmed that protein hydrolysate from gel matrix were adsorbed onto the oil-water interface competing with Tween-20 during intestinal digestion. For EFGs with higher CFG content, steric hindrance of CFG molecules and less emulsion release could inhibit droplet flocculation, thus enhancing ß-carotene bioaccessibility.