Development of α-Tocopherol Loaded PLGA Nanoparticles and Its Evaluation as a Novel Immune Adjuvant.

With the continuous development of preventive and therapeutic vaccines, traditional adjuvants cannot provide sufficient immune efficacy and it is of high necessity to develop safe and effective novel nanoparticle-based vaccine adjuvants. α-Tocopherol (TOC) is commonly used in oil-emulsion adjuvant systems as an immune enhancer, yet its bioavailability is limited by poor water solubility. This study aims to develop TOC-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (TOC-PLGA NPs) to explore the potential of TOC-PLGA NPs as a novel nanoparticle-immune adjuvant. TOC-PLGA NPs are prepared by a nanoprecipitation method and their physicochemical properties are characterized. It is shown that TOC-PLGA NPs are 110.8 nm, polydispersity index value of 0.042, and Zeta potential of -13.26 mV. The encapsulation efficiency and drug loading of NPs are 82.57% and 11.80%, respectively, and the cumulative release after 35 days of in vitro testing reaches 47%. Furthermore, TOC-PLGA NPs demonstrate a superior promotion effect on RAW 264.7 cell proliferation compared to PLGA NPs, being well phagocytosed and also promoting antigen uptake by macrophages. TOC-PLGA NPs can strongly upregulate the expression of co-stimulatory surface molecules and the secretion of cytokines. In conclusion, TOC-PLGA NPs can be a novel vaccine adjuvant with excellent biocompatibility and significant immune-enhancing activity.

Near UV light photo-degradation of lactate and related α-hydroxycarboxylates in the presence of Fe(III): formation of carbon dioxide radical anion.

In recent studies we have reported on the near-UV light-induced degradation of iron complexes of various pharmaceutical excipients, such as Fe(III)-citrate and Fe(III)-amino acid complexes. Mechanistic studies revealed a common photo-degradation pattern, i.e. the formation of carbon dioxide radical anion, a potent reducing agent, via an alkoxyl/amino radical intermediate generated by light-induced ligand-to-metal charge transfer (LMCT) involving α-hydroxycarboxylates or amino acids. Herein, we confirm the proposed general photo-degradation pathways through the study of the iron complexes of other α-hydroxycarboxylates that may be present in protein formulations, such as lactate and glycolate. The results indicate that lactate generates even higher yields of •CO2- as compared to citrate, suggesting a significant potential of lactate for the promotion of photo-degradation in pharmaceutical formulations.

Auranofin-loaded PLGA nanoparticles alleviate cognitive deficit induced by streptozotocin in rats model: modulation of oxidative stress, neuroinflammatory markers, and neurotransmitters.

Alzheimer's disease remains an unsolved neurological puzzle with no cure. Current therapies offer only symptomatic relief, hindered by limited uptake through the blood-brain barrier. Auranofin, an FDA-approved compound, exhibits potent antioxidative and anti-inflammatory properties targeting brain disorders. Yet, its oral bioavailability challenge prompts the exploration of nanoformulation-based solutions enhancing blood-brain barrier penetrability. The study aimed to investigate the neuroprotective potential of auranofin nanoparticles in streptozotocin-induced AD rats. Auranofin-containing polylactic-co-glycolic acid nanoparticles were formulated by the multiple emulsion solvent evaporation method. Characterization was done by determining entrapment efficiency, particle size distribution, surface charge, and morphology. An in vivo study was performed by administering streptozotocin (3 mg/kg/i.c.v., days 1 and 3), auranofin (5 and 10 mg/kg), auranofin nanoparticles (2.5 and 5 mg/kg), and donepezil (2 mg/kg) for 14 days orally. Behavioral deficits were evaluated using the open field test, Morris water maze, objective recognition test, change in oxidative stress levels, and AD markers in the brain. Following the decapitation of the rats, the brains were excised to isolate the hippocampus. Subsequent analyses included the quantification of biochemical and neuroinflammatory markers, as well as the assessment of neurotransmitter levels. The characterization of auranofin nanoparticles showed an entrapment efficiency of 98%, an average particle size of 101.5 ± 10.3 nm, a surface charge of 27.5 ± 5.10 mV, and a polydispersity index of 0.438 ± 0.12. In vivo, administration of auranofin and auranofin nanoparticles significantly reversed streptozotocin-induced cognitive deficits, biochemical alteration, neuroinflammatory markers, and neurotransmitter levels. The present finding suggests that auranofin nanoparticles have more significant neuroprotective potential than auranofin alone. The therapeutic efficacy may be attributed to its antioxidant and anti-inflammatory properties, as well as its positive neuromodulatory effects. Therefore, our findings suggest that it could be a promising candidate for Alzheimer's disease therapy.

An Insight into Biodegradable Polymers and their Biomedical Applications for Wound Healing.

Biodegradable polymers, encompassing both natural and synthetic polymers, have demonstrated efficacy as carriers for synthetic drugs, natural bioactive molecules, and inorganic metals. This is due to their ability to control the release of these substances. As a result, various advanced materials, such as nanoparticle-loaded hydrogels, nanofibrous scaffolds, and nanocomposites, have been developed. These materials have shown promise in enhancing processes, such as cell proliferation, vascular angiogenesis, hair growth, and wound healing management. Natural polymers, including hyaluronic acid, collagen, chitosan, gelatin, and alginate, as well as synthetic polymers like polylactic acid, polyglycolic acid, polylactic co-glycolic acid, and PCA, have significant potential for promoting wound healing. This study examines the advancements in biodegradable polymers for wound healing, specifically focusing on each polymer and its distinctive formulations. It also discusses the in-vitro experiments conducted using different cell lines, as well as the in-vivo studies that explore the numerous uses of these polymers in wound healing. The discussion also included the exploration of modifications or combinations of several polymers, as well as surface changes, in order to produce synergistic effects and address the limitations of individual polymers. The goal was to expedite the healing process of different chronic wounds. Due to this, there have been notable advancements in the technological use of polymeric mixes, including biodegradable polymer-based scaffolds, which have accelerated the process of wound healing.

A clinical and novel dermoscopic investigation of combined peels as a hand aging treatment.

BACKGROUND: The hands are one of the areas where skin aging is most noticeable, alongside the face, but limited studies used dermoscopic evaluation on hand aging. The Dermoscopy Photoaging Scale (DPAS) is frequently used to assess face aging but is never used for hand aging. Treating skin aging using chemical peeling is a commonly used method to rejuvenate the skin on the hands, as it is relatively affordable. Using multiple chemical peels may yield more significant results. AIMS: To determine the effectiveness of a chemical peeling combination in retarding hand aging and to assess the utility of DPAS in this process. METHODS: This study involved 69 Fitzpatrick skin types III-IV volunteers aged 20-69. One hand of each participant was treated with 20% glycolic acid (GA), while the other received a combination of peels consisting of 20% GA and 15% trichloroacetic acid (TCA). The hands were clinically examined before and after the treatments, and dermoscopic examinations were performed using a modified DPAS. RESULTS: Four treatments improved clinical and dermoscopic characteristics in both hands. The combined peeling considerably improved pigmentation intensity on the dorsal hand compared to the GA peel (p < 0.001). Post-chemical peeling patient satisfaction increased significantly. CONCLUSIONS: The modified DPAS is a valuable instrument to assess the signs of hand aging. The combination of GA and TCA effectively improves skin aging of the hands and offers an accessible and economical option for addressing skin aging.

Functionality-type and chemical-composition separation of poly(lactide-co-glycolide) using gradient elution normal-phase liquid chromatography with basic and acidic additives.

End groups of poly(Lactide-co-glycolide) (PLGA) play an important role in determining the properties of polymers for use in drug delivery systems. For instance, it has been reported that the encapsulation efficiency in PLGA microspheres varies significantly between ester-terminated and acid-terminated PLGA. More importantly, the in-vivo degradation time of such polymer excipients is influenced by the functional end-group of the copolymer used. The end group distribution in PLGA polymers has been studied using electrospray and matrix-assisted laser-desorption/ionization - high-resolution mass spectrometry. In both cases, the application of these methods is typically limited to PLGA having a molecular weight of up to 4 kDa. 13Carbon-nuclear-magnetic-resonance has also been reported as a method to differentiate and quantify PLGA end groups with a molecular weight up to 136 kDa. However, reported NMR methods take over 12 h per sample, limiting throughput.Cryoprobe NMR can reduce the time required for the process, however such NMR equipment is costly, which makes it unsuitable for the quality control of PLGA. Here, we present a normal-phase liquid chromatography method capable of resolving functionality type distribution (FTD) and, partially, chemical composition distribution (CCD) in commercial PLGA polymers obtained from ring opening polymerization. This method can separate PLGA polymers with a molecular weight of up to 183.0 kDa while also enabling the simultaneous separation of the difference of Lactic acid (LA)/Glycolic acid (GA) ratios. To achieve this, a cross-linked diol column was used with a ternary gradient from HEX to 0.1 % v/v TEA in EA to 0.1 % v/v FA in THF to allow first for the elution of mono-ester terminated PLGA, followed by the di-acid terminated. In addition, a separation of ester-terminated PLGA in the difference of the LA/GA ratio was achieved. This method is expected to aid in understanding the correlation between PLGA's FTD, CCD, and physical properties, facilitating product development and quality control.

Scanning electron microscopic analysis of 5% glycolic acid as a novel alternative to 17% ethylenediaminetetraacetic acid in root biomodification: An in vitro study.

Background: Nonsurgical periodontal therapy results in the formation of a smear layer which inhibits tissue regeneration. Root biomodification (RB) using various agents has been tried for the enhancement of new attachment formation. However, no substantial therapeutic advantages of currently available root conditioning agents have been reported emphasizing the need for additional biologically acceptable agents. Glycolic acid (GA) due to its antimicrobial nature and ability of initiation and proliferation of fibroblasts may potentially modify root surface enabling regeneration. Materials and Methods: Eighty specimens from 40 single-rooted teeth were treated with 17% ethylenediaminetetraacetic acid (EDTA) and 5% GA and scanning electron microscopy analysis was done. The micrographs were examined for the evaluation of smear layer removal, total number of dentinal tubules, total number of patent dentinal tubules, mean diameter and surface area of dentinal tubules, and dentin erosion. Statistical analysis was done using unpaired t-test for intergroup comparison. Results: The efficacy of smear layer removal (P = 0.01) and dentin erosion (P = 0.042) was significantly better in the GA group. Both the groups showed no difference in dentinal tubule-related parameters. Conclusion: GA showed improved RB with greater smear layer removal and lesser dentin erosion, indicating its use as a potent alternative to the conventional EDTA root conditioning.

Electrocatalytic Valorization of Nitrate and Polyester Plastic for Simultaneous Production of Ammonia and Glycolic Acid.

Electrochemical upcycling of nitrate and polyester plastic into valuable products is an ideal solution to realize the resource utilization. Here, the co-production of ammonia (NH3) and glycolic acid (GA) via electrochemical upcycling of nitrate and polyethylene terephthalate (PET) plastics over mesoporous Pd3Au film on Ni foam (mPd3Au/NF), which is synthesized by micelle-assisted replacement method, is proposed. The mPd3Au/NF with well-developed mesoporous structure provides abundant active sites and facilitated transfer channels and strong electronic effect. As such, the mPd3Au/NF exhibits high Faraday efficiencies of 97.28% and 95.32% at 0.9 V for the formation of NH3 and GA, respectively. Theoretical results indicate that the synergistic effect of Pd and Au can optimize adsorption energy of key intermediates *NOH and *OCH2-CH2OH on active sites and increase bond energy of C─C band, thereby improving the activity and selectivity for the formation of NH3 and GA. This work proposes a promising strategy for the simultaneous conversation of nitrate and PET plastic into high-value NH3 and GA.

Development of 225Ac-doped biocompatible nanoparticles for targeted alpha therapy.

Targeted alpha therapy (TAT) relies on chemical affinity or active targeting using radioimmunoconjugates as strategies to deliver α-emitting radionuclides to cancerous tissue. These strategies can be affected by transmetalation of the parent radionuclide by competing ions in vivo and the bond-breaking recoil energy of decay daughters. The retention of α-emitting radionuclides and the dose delivered to cancer cells are influenced by these processes. Encapsulating α-emitting radionuclides within nanoparticles can help overcome many of these challenges. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles are a biodegradable and biocompatible delivery platform that has been used for drug delivery. In this study, PLGA nanoparticles are utilized for encapsulation and retention of actinium-225 ([225Ac]Ac3+). Encapsulation of [225Ac]Ac3+ within PLGA nanoparticles (Zave = 155.3 nm) was achieved by adapting a double-emulsion solvent evaporation method. The encapsulation efficiency was affected by both the solvent conditions and the chelation of [225Ac]Ac3+. Chelation of [225Ac]Ac3+ to a lipophilic 2,9-bis-lactam-1,10-phenanthroline ligand ([225Ac]AcBLPhen) significantly decreased its release (< 2%) and that of its decay daughters (< 50%) from PLGA nanoparticles. PLGA nanoparticles encapsulating [225Ac]AcBLPhen significantly increased the delivery of [225Ac]Ac3+ to murine (E0771) and human (MCF-7 and MDA-MB-231) breast cancer cells with a concomitant increase in cell death over free [225Ac]Ac3+ in solution. These results demonstrate that PLGA nanoparticles have potential as radionuclide delivery platforms for TAT to advance precision radiotherapy for cancer. In addition, this technology offers an alternative use for ligands with poor aqueous solubility, low stability, or low affinity, allowing them to be repurposed for TAT by encapsulation within PLGA nanoparticles.

Aspects of glass and hybridization protocols for bonding of fiber posts to root dentine.

This study evaluated bond strength of glass fiber posts to root dentin using push-out (PO) and diametral compression (DC), testing glycolic acid as a conditioner and varying dentin moisture. An additional aim was to test whether DC can be an alternative test to PO for bond strength assessment. Eighty bovine teeth were divided into eight groups (n = 10) defined by the use of either 37% glycolic acid or 37% phosphoric acid (PA) on moist or wet dentin before bonding with either Adapter SingleBond/RelyX ARC or One Step Plus/Duo-Link Bisco. Each tooth provided discs with an internal diameter of 2 mm, external diameter of 5 mm, and height of 2 mm, which underwent PO and DC. Finite element analysis (FEA) was carried out on 3D models. When analyzing PO results through linear regression, the highest values of bond strength were observed using glycolic acid on wet dentin in the cervical and middle thirds of the teeth. Analyzing DC results, the only statistical influence on values was the dental thirds. The scatterplot of the DC results and the PO bond strength values indicated no relationship between the results of the two tests (r = 0.03; p = 0.64). PO test detected more sensitive changes in bond strength values than DC.

Optimizing Process Parameters for Controlled Drug Delivery: A Quality by Design (QbD) Approach in Naltrexone Microspheres.

The formulation of microspheres involves a complex manufacturing process with multiple steps. Identifying the appropriate process parameters to achieve the desired quality attributes poses a significant challenge. This study aims to optimize the critical process parameters (CPPs) involved in the preparation of naltrexone microspheres using a Quality by Design (QbD) methodology. Additionally, the research aims to assess the drug release profiles of these microspheres under both in vivo and in vitro conditions. Critical process parameters (CPPs) and critical quality attributes (CQAs) were identified, and a Box-Behnken design was utilized to delineate the design space, ensuring alignment with the desired Quality Target Product Profile (QTPP). The investigated CPPs comprised polymer concentration, aqueous phase ratio to organic phase ratio, and quench volume. The microspheres were fabricated using the oil-in-water emulsion solvent extraction technique. Analysis revealed that increased polymer concentration was correlated with decreased particle size, reduced quench volume resulted in decreased burst release, and a heightened aqueous phase ratio to organic phase ratio improved drug entrapment. Upon analyzing the results, an optimal formulation was determined. In conclusion, the study conducted in vivo drug release testing on both the commercially available innovator product and the optimized test product utilizing an animal model. The integration of in vitro dissolution data with in vivo assessments presents a holistic understanding of drug release dynamics. The QbD approach-based optimization of CPPs furnishes informed guidance for the development of generic pharmaceutical formulations.

Recent advances in cell membrane camouflaged nanotherapeutics for the treatment of bacterial infection.

Infectious diseases caused by bacterial infections are common in clinical practice. Cell membrane coating nanotechnology represents a pioneering approach for the delivery of therapeutic agents without being cleared by the immune system in the meantime. And the mechanism of infection treatment should be divided into two parts: suppression of pathogenic bacteria and suppression of excessive immune response. The membrane-coated nanoparticles exert anti-bacterial function by neutralizing exotoxins and endotoxins, and some other bacterial proteins. Inflammation, the second procedure of bacterial infection, can also be suppressed through targeting the inflamed site, neutralization of toxins, and the suppression of pro-inflammatory cytokines. And platelet membrane can affect the complement process to suppress inflammation. Membrane-coated nanoparticles treat bacterial infections through the combined action of membranes and nanoparticles, and diagnose by imaging, forming a theranostic system. Several strategies have been discovered to enhance the anti-bacterial/anti-inflammatory capability, such as synthesizing the material through electroporation, pretreating with the corresponding pathogen, membrane hybridization, or incorporating with genetic modification, lipid insertion, and click chemistry. Here we aim to provide a comprehensive overview of the current knowledge regarding the application of membrane-coated nanoparticles in preventing bacterial infections as well as addressing existing uncertainties and misconceptions.

Novel poly(lactic-co-glycolic acid) nanoliposome-encapsulated diclofenac sodium and celecoxib enable long-lasting synergistic treatment of osteoarthritis.

BACKGROUND: Diclofenac sodium (DS) and celecoxib (CEL) are primary anti-inflammatory agents used in the treatment of osteoarthritis (OA). Formulating these drugs into extended-release versions can effectively address the issue of multiple daily doses. In this study, we designed and synthesized a novel poly(lactic-co-glycolic acid) (PLGA) nanoliposome as a dual-drug delivery sustained-release formulation (PPLs-DS-CEL) to achieve long-lasting synergistic treatment of OA with both DS and CEL. METHODS: PPLs-DS-CEL was synthesized by the reverse evaporation method and evaluated for its physicochemical properties, encapsulation efficiency, drug release kinetics and biological properties. A rat OA model was established to assess the therapeutic efficacy and biosafety of PPLs-DS-CEL. RESULTS: The particle size of PPLs-DS-CEL was 218.36 ± 6.27 nm, with a potential of 32.56 ± 3.28 mv, indicating a homogeneous vesicle size. The encapsulation of DS and CEL by PPLs-DS-CEL was 95.18 ± 4.43% and 93.63 ± 5.11%, with drug loading of 9.56 ± 0.32% and 9.68 ± 0.34%, respectively. PPLs-DS-CEL exhibited low cytotoxicity and hemolysis, and was able to achieve long-lasting synergistic analgesic and anti-inflammatory therapeutic effects in OA through slow release of DS and CEL, demonstrating good biosafety properties. CONCLUSION: This study developed a novel sustained-release nanoliposomes formulation capable of co-loading two drugs for the long-acting synergistic treatment of OA. It offers a new and effective therapeutic strategy for OA treatment in the clinic settings and presents a promising approach for drug delivery systems.

Glycolic acid-induced disruption of epidermal homeostasis in a skin equivalent model: Insights into temporal dynamics and mechanisms.

Glycolic acid (GA) is extensively used in cosmetic formulations and skin peeling treatments but its adverse effects, notably severe disruption of epidermal structure, limit its clinical utility. However, the detailed impact of GA on epidermal homeostasis, including changes in structure and protein expression over time, is not fully understood. This study employed a reconstructed human epidermis (RHE) model to assess the effects of varying GA concentrations on epidermal proliferation, differentiation, and desquamation at different time points. Through histology, immunofluorescence, and immunohistochemistry, we observed that 35% GA concentration adversely caused abnormal epidermal homeostasis by affecting epidermal proliferation, differentiation and desquamation. Our findings reveal time-specific responses of key proteins to GA: Filaggrin, Involucrin, Loricrin, and Ki67 showed very early responses; KLK10 an early response; and AQP3 and K10 late responses. This research provides a detailed characterization of GA's effects in an RHE model, mimicking clinical superficial peeling and identifying optimal times for detecting GA-induced changes. Our results offer insights for designing interventions to mitigate GA's adverse effects on skin, enhancing the safety and efficacy of GA peeling treatments.

Efficacy of 15% trichloroacetic acid peel versus 35% glycolic acid peel in acanthosis Nigricans: A randomized open-label study.

Introduction: Acanthosis Nigricans (AN) is an acquired disorder of keratinization. It presents as hyperpigmentation, velvety texture of skin that can involve any part of the body including the face. Different topical, systemic therapies, or physical therapies including laser have been explored. However, there are not many randomized controlled studies for the majority of therapy alternatives besides lifestyle modifications and weight reduction. Objectives: The aim of this study was to compare the effectiveness of 15% trichloroacetic acid (TCA) and 35% glycolic acid (GA) peel for AN. Materials and Methods: Forty participants were included and randomized into two groups. In groups A and B, peeling with 15% TCA and 35% GA was done, respectively. The effectiveness of each peel was assessed using changes in the Acanthosis Nigricans Area and Severity Index Score (ANASI) and Physician Assessment Score. Statistical analysis included Wilcoxon-Mann-Whitney test, Friedman test, and generalized estimating equations. Results: The overall change in ANASI over time was compared in the two groups using the generalized estimating equations method. A significant difference was observed in the trend of ANASI over time between the two groups (P < 0.001). TCA peel group showed more change in ANASI as compared with GA peel group. Conclusion: In our research, 15% TCA has a better efficacy when compared with 35% GA peel after three sessions of chemical peeling. We therefore recommend the use of 15% TCA peel in AN as a safe and effective treatment option. However, more comprehensive randomized control studies are required for supporting data.

Efficacy of oral insulin nanoparticles for the management of hyperglycemia in a rat model of diabetes induced with streptozotocin.

Insulin is the cornerstone of treatment in type 1 diabetes mellitus. However, because of its protein structure, insulin has to be administered via injection, and many attempts have been made to create oral formulations, especially using nanoparticles (NPs). The aim of this study was to compare the hypoglycemic effect of insulin-loaded NPs to that of subcutaneous insulin in an in vivo rat model of diabetes. We used biodegradable D-α-tocopherol polyethylene glycol succinate-emulsified, chitosan-capped poly(lactic-co-glycolic acid) NPs loaded with soluble human insulin in a dose of 20 IU/kg body weight, and examined the physical characteristics of NPs in vivo and in vitro. Serum glucose levels were reduced after 6 h, but the difference was not significant compared to subcutaneous insulin; at 12 h and 24 h, insulin levels were significantly higher in rats treated with NPs than in rats treated with subcutaneous insulin. There was no significant difference in serum insulin levels at 12 h and 24 h compared to non-diabetic rats. Our findings suggest that chitosan-based NPs are able to maintain good glycemic control for up to 24 h and can be considered a potential carrier for oral insulin delivery.

Nano-enabled delivery of diosgenin and emodin ameliorates respirable silica dust-induced pulmonary fibrosis silicosis in rats.

Oxidative stress and inflammation play a fundamental role in the beginning and advancement of silicosis. Hence, questing active phytocompounds (APCs) with anti-oxidative and anti-inflammatory properties such as diosgenin (DG) and emodin (ED) can be a therapeutic intervention targeting silica-induced pulmonary inflammation and fibrosis. Hydrophobicity and low bioavailability are the barriers that restrict the therapeutic efficacy of DG and ED against pulmonary defects. Encapsulating these APCs in polymeric nanoparticles can overcome this limitation. The present study has thus explored the anti-inflammatory and anti-fibrotic effects of polylactic-co-glycolic acid (PLGA) nanoparticles (NPs) individually loaded with DG (DGn) or ED (EDn) and in combine DG+ED [(DG+ED)n] in respirable silica dust (RSD)-induced pulmonary fibrosis silicosis rat model. Our study found that individual and combined NPs revealed physiochemical characteristics appropriate for IV administration with sustained-drug release purposes. Physiological evaluations of RSD-induced silicosis rats suggested that no treatment could improve the body weight. Still, they reduced the lung coefficient by maintaining lung moisture. Only (DG+ED)n significantly cleared free lung silica. All interventions were found to attribute the increased per cent cell viability in BALF, reduce cytotoxicity via minimizing LDH levels, and balance the oxidant-antioxidant status in silicotic rats. The expression of inflammatory cytokines (TNF-α, IL-1ß, IL-6, MCP-1, and TGF-ß1) were efficiently down-regulated with NPs interventions compared to pure (DG+ED) treatment. All drug treatments significantly declined, the 8-HdG and HYP productions indicate that RSD-induced oxidative DNA damage and collagen deposition were successfully repaired. Moreover, histopathological investigations proposed that individual or combined drugs NPs interventions could decrease the fibrosis and alveolitis grades in RSD-induced silicosis rats. However, (DG+ED)n intervention significantly inhibited pulmonary fibrosis and alveolitis compared to pure (DG+ED) treatment. In conclusion, the RSD can induce oxidative stress and inflammation in rats, producing reactive oxygen species (ROS)-mediated cytotoxicity to pulmonary cells and leading to silicosis development. The IV administration of combined NP suppressed lung inflammation and collagen formation by maintaining oxidant-antioxidant status and effectively interrupting the fibrosis-silicosis progression. These results may be attributed to the improved bioavailability of DG and ED through their combined nano-encapsulation-mediated targeted drug delivery.

Preparation and Preliminary Analysis of Several Nanoformulations Based on Plant Extracts and Biodegradable Polymers as a Possible Application for Chronic Venous Disease Therapy.

Nanotechnology is one of the newest directions for plant-based therapies. Chronic venous disease often predisposes to long-term and invasive treatment. This research focused on the inclusion of vegetal extracts from Sophorae flos (SE), Calendulae flos (CE), and Ginkgo bilobae folium (GE) in formulations with PHB and PLGA polymers and their physicochemical characterization as a preliminary stage for possible use in the development of a complex therapeutic product. The samples were prepared by an oil-water emulsification and solvent evaporation technique, resulting in suspensions with high spreadability and a pH of 5.5. ATR-FTIR analysis revealed bands for stretching vibrations (O-H, C=O, and C-H in symmetric and asymmetric methyl and methylene) in the same regions as the base components, but switched to high or low wavenumbers and absorbance, highlighting the formation of adducts/complexes between the extracts and polymers. The obtained formulations were in the amorphous phase, as confirmed by XRD analysis. AFM analysis emphasized the morphological peculiarities of the extract-polymer nanoformulations. It could be noticed that, in the case of SE-based formulations, the dominant characteristics for SE-PHB and SE-PLGA composition were the formation of random large (SE-PHB) and smaller uniform (SE-PLGA) particles; further on, these particles tended to aggregate in the case of SE-PHB-PLGA. For the CE- and GE-based formulations, the dominant surface morphology was their porosity, generally with small pores, but larger cavities were observed in some cases (CE- and GE-PHB). The highest roughness values at the (8 µm × 8 µm) scale were found for the following samples and succession: CE-PHB < SE-PLGA < SE-PHB-PLGA. In addition, by thermogravimetric analysis, impregnation in the matrix of compression stockings was evaluated, which varied in the following order: CE-polymer > SE-polymer > GE-polymer. In conclusion, nine vegetal extract-polymer nanoformulations were prepared and preliminarily characterized (by advanced physicochemical methods) as a starting point for further optimization, stability studies, and possible use in complex pharmaceutical products.

A prospective comparative study of efficacy and safety of 15% trichloroacetic acid peel, 35% glycolic acid peel and Q-switched Nd-YAG laser in patients of macular amyloidosis.

Background: The unappealing appearance of skin in macular amyloidosis (MA) interferes with the patient's quality of life, and treating the condition has been challenging. Aims and Objectives: To compare the efficacy and safety of 15% trichloroacetic acid (TCA) peel, 35% glycolic acid (GA) peel, and Q-switched Nd-YAG Laser in MA. Materials and Methods: Open, prospective study was conducted over 2 years, where after fulfilling the criteria, randomization was done into three groups. Group A: 15% TCA peel; Group B: 35% GA peel; Group C: Q-switched Nd-YAG Laser. Procedures were repeated at monthly intervals for six sittings. On each visit, patients were scored on the following parameters: color score, visual analog score (VAS), physician global assessment (PGA) scale, subjective improvement, and adverse effects. Results: A total of 75 patients (25 patients in each group) completed the treatment. The mean age of study-population was 35.68 ± 9.8 years, with female to male ratio of 11.5:1. The mean change in color score (1.68) was more by Group A, followed by Group C (1.4), followed by Group B (1.16). Similar results were noted by subjective improvement, VAS, and PGA. Adverse events were more in Group A, followed by Group C, followed by Group B. No patient showed permanent adverse events. Conclusion: TCA-peel showed superior results over Nd-YAG laser and glycolic-acid peel. TCA-peel being cost-effective with excellent acceptability should be considered a treatment modality.

Injectable testosterone PLGA microsphere with different characteristics: effect of preparation method (paddle mixing versus microfluidic device).

The purpose of this study was to compare the characteristics of testosterone polylactic-co-glycolic (PLGA) microspheres prepared by a paddle mixer or microfluidics device. The comparison was conducted by not only in vitro evaluation but also in vivo evaluation which has not been reported up to date. We discovered that, among the steps in microsphere preparation, the solvent removal process strongly impacted drug content, particle size and surface morphology. Spectroscopic measurements suggested that molecular interactions and crystallinity of the drug incorporated in the microspheres differed. For the drug release profile, although both mixer- and microfluidics-prepared samples showed similar sustained release of the incorporated drug for approximately one month in vitro, they exhibited different plasma concentration profiles in vivo. Together, our findings show that the preparation process, especially the solvent removal process, may affect the physicochemical characteristics of testosterone PLGA microspheres, leading to different in vivo performance.