Spectral and conductivity measurements insights on loading mechanisms of DMSO/water-kaolin complexes.

Kaolin, a naturally occurring clay mineral renowned for its distinctive properties, holds significant importance across various industries. The integration of dimethyl sulfoxide (DMSO) into kaolin matrices, both in the presence and absence of water, has been extensively explored for its potential to enhance material characteristics. Addressing debates surrounding the proposed adsorption mechanism for the type I structure of DMSO, this study undertook a comprehensive physicochemical characterization of DMSO-kaolin complexes (DMSO-KCs) derived from untreated (UnK) and HCl-treated (HK) Egyptian ore, with a focus on elucidating the loading mechanism facilitated by water. Key insights gleaned from electrical conductivity, dielectric constant, and Fine Testing Technology - Fourier-transform infrared (FTT-FTIR) measurements, shedding light on the bonding nature of DMSO-KCs. FTT-FTIR analysis revealed two stages of water departure at 180 °C, with the final stage coinciding with the release of pyrolysis gases, confirming the catalytic degradation of DMSO. Through X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA), two distinct bonding types of DMSO molecules with kaolinite were identified: amorphous adsorbed (type I) and lattice-oriented intercalated (type II). Electrical characteristic evaluations within the temperature range of room temperature (RT) to 260 °C and frequency range of 42 Hz-1 MHz revealed that DMSO intercalation enhances the electrical properties of kaolin. Hydrated DMSO-KCs exhibited higher values of σac and ɛ' compared to non-hydrated samples. The activation energy (Ea) values for HCl-treated samples were smaller than those of untreated ones. Alternating current (AC) conductivity analysis indicated predominantly ionic behavior with frequency and temperature dependency in both HCl-treated and untreated kaolin. Our findings substantiate the adsorption mechanism of Type I DMSO, highlighting its amorphous nature, instability, and catalytic degradation over time, in contrast to the intercalated type II. This elucidation is pivotal for understanding the behavior of DMSO-KCs across diverse applications, including electronics, ceramics, and materialsscience.

Lithiation: Advancing Material Synthesis and Structural Engineering for Emerging Applications.

Lithiation, a process of inserting lithium ions into a host material, is revolutionizing nanomaterials synthesis and structural engineering as well as enhancing their performance across emerging applications, particularly valuable for large-scale synthesis of high-quality low-dimensional nanomaterials. Through a systematic investigation of the synthetic strategies and structural changes induced by lithiation, this review aims to offer a comprehensive understanding of the development, potential, and challenges associated with this promising approach. First, the basic principles of lithiation/delithiation processes will be introduced. Then, the recent advancements in the lithiation-induced structure changes of nanomaterials, such as morphology tuning, phase transition, defect generation, etc., will be stressed, emphasizing the importance of lithiation in structural modulation of nanomaterials. With the tunable structures induced by the lithiation, the properties and performance in electrochemical, photochemical, electronic devices, bioapplications, etc. will be discussed, followed by outlining the current challenges and perspectives in this research area.

Confocal image of three oxoaporphine alkaloids in cancer cell lines and their interaction with DNA by multispectroscopic and molecular docking techniques.

Dicentrinone (Di), liriodenine (Li) and lysicamine (Ly) are three natural oxoaporphine alkaloids (OAs), which revealed significant biological activity such as anticancer, anti-inflammatory and antimicrobial activities and were considered as potential lead compounds for the development of new clinical chemicals. In the present study, confocal laser scanning fluorescence microscopy observation demonstrated these three natural OAs could traverse inside of the nucleus and get an opportunity to interact with DNA. Their interaction properties with DNA were then investigated simultaneously by two spectral fluorescent probes of ethidium bromide (EB) and methyl green (MG), as well as UV-vis absorption and cyclic voltammetry measurements, and further verified by the molecular docking analysis. Results indicated Di and Li were distinctly classified as the intercalative molecules to DNA, however, Ly was confirmed with a mixed-mode binding of partial intercalation and groove affinity. Their binding ability was revealed as the follows: Di ≥ Li > Ly, which was correlated with their structural changes. Thermodynamic studies revealed the binding process of Li and Ly with ctDNA was all spontaneous, the hydrophobic interaction was the major binding force for Li-ctDNA complex, however, the interaction between Ly and ctDNA relied on both hydrophobic and hydrogen binding force. Molecular docking provided detailed computational interaction of Di, Li and Ly with DNA, which proved the intercalation binding of Li-DNA complex and Di-DNA complex stabilizing mainly by the π-π binding force, however, apart from a small quantity of π-π interaction, another binding force in the Ly-DNA complex mainly was supplied from the weaker Pi-Alkyl, hydrogen bond and Pi-Anion interactions.

Interfacial Phenomena Governing Performance of Graphene Electrodes in Aqueous Electrolyte.

There is evidence of the presence of intercalated water between graphene and the substrate in electronic devices. However, a proper understanding of the impact of this phenomenon, which causes important limitations for the optimization of graphene-based devices operating in aqueous electrolytes, is missing. We used graphene-based electrodes on insulating and conducting substrates to evaluate the impact of intercalated water by combining experimental techniques with numerical simulations. Results show that the capacitance of the conductive substrate/graphene electrodes is significantly higher than that of the insulating substrate/graphene ones. Meanwhile, Raman spectroscopy demonstrates that graphene charge modulation with the applied potential is independent of the substrate conductivity. We found that this intriguing behavior is influenced by the water intercalation phenomena and governed by the substrate conductive nature. This work contributes to the understanding of the electric response of graphene-based devices in an aqueous environment and of the methods to measure and model it.

Intercalation of multilayered Ti3C2Tx electrode doped with vanadium for highly sensitive electrochemical detection of dopamine in biological samples.

The electrochemical detection characteristics of the layered Ti3C2Tx material were enhanced by modifying its surface. Ti3C2Tx is used as the Ti - F chemical bond weakens with increasing pH levels. Ti3C2Tx is alkalinized by KOH, and F is substituted for - OH. The surface hydroxyl groups can be eliminated by intercalating K+. This study elaborates on the hydrothermal production of vanadium-doped layered Ti3C2Tx nanosheets intercalated with K+. The development of a sensitive dopamine electrochemical sensor is outlined by intercalating a vanadium-doped multilayered K+ Ti3C2Tx electrode. The chemical, surface, and structural composition of the synthesized electrode for dopamine detection was investigated and confirmed. The sensor exhibits a linear range (1-10 µM), a low detection limit (8.4 nM), and a high sensitivity of 2.746 µAµM-1cm-2 under optimal electrochemical testing conditions. The sensor also demonstrates exceptional anti-interference capabilities and stability. The sensor was applied to detection of dopamine in (spiked) rat brains, human serum, and urine samples. This study introduces a novel approach by utilizing K+ intercalation of vanadium-doped Ti3C2Tx-based electrochemical sensors and an innovative method for dopamine detection. The dopamine detection revealed the potential of (V0.05) K+ Ti3C2Tx-GCE for practical application in pharmaceutical sample analysis.

Systematic Study on Swelling/Delamination of Layered Metal Oxides with Quaternary Ammonium Ions: Production of Well-Shaped/Oversized Unilamellar Nanosheets.

Enormous swelling of layered host compounds in an aqueous solution of various amines has been investigated as an important step in the synthesis of molecularly thin 2D nanosheets. However, a complete understanding of the reaction process has not been attained, which is the barrier for producing high-quality unilamellar nanosheets. Here, the swelling and delamination behaviors of platelet single crystals of protonated layered metal oxides are systematically examined with a series of tetraalkylammonium (TAA) hydroxide solutions. Upon contact with the solutions, the crystals immediately underwent massive expansion by several tens to hundreds of times. The swollen crystals can be delaminated into elementary layers by the application of external shear force. The exfoliation behavior is dependent on TAA ions, especially in terms of yield and lateral size/shape of the delaminated nanosheets. The swollen crystals with TAA ions with longer alkyl chains are delaminated almost completely, but irregular and fractured small sheets are yielded. Such long alkyl chains become entangled on the oxide layer and resulting hydrophobic interactions may be responsible for the lateral fragmentation. It is found that replacement of aqueous solutions with organic solvents to suppress the hydrophobic interactions is effective to produce oversized nanosheets in rectangular shape with sharp edges.

Efficient Electron Injection into Graphullerene Enables Reversible NaC2 Sodium Storage.

Sodium-ion batteries are emerging as promising alternatives to conventional lithium-based technology, offering solutions to challenges in large-scale grid storage. However, the capacity of conventional graphite-based anodes for storing Na-ions is inherently limited by suboptimal thermodynamic interactions and irreversible structural changes that occur in the anode during charge-discharge cycles. Herein, we present a computational design that explores the potential of graphullerene, a two-dimensional framework with interconnected fullerene moieties, for the reversible storage of Na-ions. A unique aspect of this design is the electron injection capacity into the graphullerene anode, reaching 15 electrons per fullerene moiety, which is the highest limit to date. This advancement enables large-scale Na-ion storage up to the stoichiometry of NaC2, exhibiting specific capacity of 551 mAhg-1 and averaged open circuit voltage of 0.18 V vs Na/Na+. In addition, the multilayered arrangement of stored Na-ions enhances the Na-ion diffusivity on the graphullerene surface, leading to rapid insertion and extraction kinetics. Thus, raising the electron injection limit offers a promising strategy to transform carbon-based anodes into suitable candidates for reversible Na-ion storage, without relying on artificial defect introduction or doping.

Operando Stable Palladium Hydride Nanoclusters Anchored on Tungsten Carbides Mediate Reverse Hydrogen Spillover for Hydrogen Evolution.

Proton exchange membrane (PEM) electrolysis holds great promise for green hydrogen production, but suffering from high loading of platinum-group metals (PGM) for large-scale deployment. Anchoring PGM-based materials on supports can not only improve the atomic utilization of active sites but also enhance the intrinsic activity. However, in practical PEM electrolysis, it is still challenging to mediate hydrogen adsorption/desorption pathways with high coverage of hydrogen intermediates over catalyst surface. Here, operando generated stable palladium (Pd) hydride nanoclusters anchored on tungsten carbide (WCx) supports were constructed for hydrogen evolution in PEM electrolysis. Under PEM operando conditions, hydrogen intercalation induces formation of Pd hydrides (PdHx) featuring weakened hydrogen binding energy (HBE), thus triggering reverse hydrogen spillover from WCx (strong HBE) supports to PdHx sites, which have been evidenced by operando characterizations, electrochemical results and theoretical studies. This PdHx-WCx material can be directly utilized as cathode electrocatalysts in PEM electrolysis with ultralow Pd loading of 0.022 mg cm-2, delivering the current density of 1 A cm-2 at the cell voltage of ~1.66 V and continuously running for 200 hours without obvious degradation. This innovative strategy via tuning the operando characteristics to mediate reverse hydrogen spillover provide new insights for designing high-performance supported PGM-based electrocatalysts.

Helmholtz Plane Regulation Empowers PF6- Permselectivity towards High Coulombic Efficiency Dual Ion Battery of 5.5 V.

High-voltage dual ion battery (DIB) is promising for stationary energy storage applications owing to its cost-effectiveness, which has been a hot topic of research in rechargeable battery fields. However, it still suffers from rapid battery failure caused by the severe solvent co-intercalation and electrolyte oxidation. To address these bottlenecks, herein a functional electrolyte additive hexafluoroglutaric anhydride (HFGA) is presented based on a Helmholtz plane regulation strategy. It is demonstrated that the HFGA can precisely enter into the Helmholtz plane and positively regulate anion solvation behaviors near the graphite electrode surface owing to its considerable H-F affinity with ethyl methyl carbonate (EMC), thus alleviating EMC-related co-intercalation and oxidation decomposition during DIB charging. Meanwhile, HFGA can copolymerize with the presence of PF5 at the Helmholtz plane to participate in forming a CF2-rich CEI layer with excellent PF6- permselectivity, conducive to achieving PF6- de-solvation and simultaneously suppressing electrolyte oxidation decomposition. By virtue of such beneficial effects, the graphite cathode enables a 5.5 V DIB with a prominent capacity retention of 92% and a high average Coulombic efficiency exceeding 99% within 2000 cycles, demonstrating significantly enhanced electrochemical reversibility. The Helmholtz plane regulation strategy marks a milestone in advancing DIB technologies.

Neomycin Intercalation in Montmorillonite: The Role of Ion Exchange Capacity and Process Conditions.

The study examined the possibility of intercalation of montmorillonite with neomycin in an aqueous drug solution and the factors influencing the effectiveness of this process, such as the ion exchange capacity and process conditions, including the time and temperature of incubation with the drug. X-ray diffractometry (XRD), infrared spectroscopy (FTIR), thermal analysis (DSC/TG), and Zeta potential measurement were used to confirm drug intercalation as well as to investigate the nature of clay-drug interactions. The obtained conjugates with the most favorable physicochemical properties were also tested for antibacterial response against Gram-negative bacteria (Escherichia coli) to confirm that the bactericidal properties of neomycin were retained after intercalation and UV-VIS spectrophotometry was used to examine the kinetics of drug release from the carrier. The results of the conducted research clearly indicate the successful intercalation of neomycin in montmorillonite and indicate the influence of process parameters on the properties of not only the conjugates themselves but also the properties of the intercalated drug, particularly its bactericidal activity. Ultimately, a temperature of 50 °C was found to be optimal for effective drug intercalation and the conjugates obtained within 2 h showed the highest antibacterial activity, indicating the highest potential of the thus-obtained montmorillonite conjugates as neomycin carriers.

Silica-Ti3C2Tx MXene Nanoarchitectures with Simultaneous Adsorption and Photothermal Properties.

Layered Ti3C2Tx MXene has been successfully intercalated and exfoliated with the simultaneous generation of a 3D silica network by treating its cationic surfactant intercalation compound (MXene-CTAB) with an alkoxysilane (TMOS), resulting in a MXene-silica nanoarchitecture, which has high porosity and specific surface area, together with the intrinsic properties of MXene (e.g., photothermal response). The ability of these innovative MXene silica materials to induce thermal activation reactions of previously adsorbed compounds is demonstrated here using NIR laser irradiation. For this purpose, the pinacol rearrangement reaction has been selected as a first model example, testing the effectiveness of NIR laser-assisted photothermal irradiation in these processes. This work shows that Ti3C2Tx-based nanoarchitectures open new avenues for applications that rely on the combined properties inherent to their integrated nanocomponents, which could be extended to the broader MXene family.

Complex Formation of Ag+ and Li+ with Host Molecules Modeled on Intercalation of Graphite.

Pi-stacked and box-shaped host molecules with xanthene as the basis and pyrene as the π-plane were synthesized to verify cation-π interactions between graphene and metal cations. Since crystal structure analysis was not available, DFT calculations were performed to determine the optimized structure, and the π-planes were found to have a slipped parallel structure, with average distances of 456.2-581.0 pm for the stacked compound and 463.4-471.4 pm for the box-shaped compound. Li+ and Ag+ were chosen as acceptors for complexation with metal ions, and their interactions with the π-plane were clarified by NMR titration. Clearly, the interaction with metal ions increased when pyrene π-planes were stacked rather than the pyrene itself. In the stacked compound, the association constants of Ag+ and Li+ were similar; however, in the box-shaped host molecule, only Ag+ had moderate coordination ability, but the interaction with Li+ was very weak, comparable to the interaction with pyrene. As a result, intercalation is more likely to occur in stacked host compound 1, which has some degree of freedom in the pyrene rings, than in the box-shaped compound.

Ball-Milling Enhanced UV Protection Performance of Ca2Fe-Sulisobenzone Layered Double Hydroxide Organic Clay.

Using a co-precipitation technique, the anionic form of sulisobenzone (benzophenone-4) sunscreen ingredient was incorporated into the interlayer space of CaFe-hydrocalumite for the first time. Using detailed post-synthetic millings of the photoprotective nanocomposite obtained, we aimed to study the mechanochemical effects on complex, hybridized layered double hydroxides (LDHs). Various physicochemical properties of the ground and the intact LDHs were compared by powder X-ray diffractometry, N2 adsorption-desorption, UV-Vis diffuse reflectance, infrared and Raman spectroscopy, scanning electron microscopy and thermogravimetric measurements. The data showed significant structural and morphological deformations, surface and textural changes and multifarious thermal behavior. The most interesting development was the change in the optical properties of organic LDHs; the milling significantly improved the UV light blocking ability, especially around 320 nm. Spectroscopic results verified that this could be explained by a modification in interaction between the LDH layers and the sulisobenzone anions, through modulated π-π conjugation and light absorption of benzene rings. In addition to the vibrating mill often used in the laboratory, the photoprotection reinforcement can also be induced by the drum mill grinding system commonly applied in industry.

Chemochromism and Tunable Acoustic Phonons in Intercalated MoO3: Ag-, Bi-, In-, Mo-, Os-, Pd-, Pt-, Rh-, Ru-, Sb-, and W-MoO3.

Intercalation of several elements (Ag, Bi, In, Mo, Os, Pd, Pt, Rh, Ru, Sb, and W) is used to chemically alter a wide range of properties of two-dimensional layered α-MoO3. Intercalation modifies acoustic phonons and elastic constants, as measured with Brillouin scattering. Intercalation alters electronic bandgaps, color, structure, Raman shifts, and electron binding energies. Optical chemochromism is demonstrated with intercalants changing the color of MoO3 from transparent to brilliant blue (In, Mo, Os, and Ru) and orange (Ag). Correlations are investigated among material properties. There is evidence that in-plane longitudinal stiffness c11 correlates with changes in the bandgap, while various Raman modes appear to be connected to a variety of properties, including shear modulus c55, Mo binding energies, lattice constants, and the preferred crystal structure of the intercalant. The results indicate a surprising degree of complexity, suggesting competition among multiple distinct mechanisms and interactions involving specific intercalant species.

Polymer-Ion Interaction Prompted Quasi-Solid Electrolyte for Room-Temperature High-Performance Lithium-Ion Batteries.

Lithium-ion batteries using quasi-solid gel electrolytes (QSEs) have gained increasing interest due to their enhanced safety features. However, their commercial viability is hindered by low ionic conductivity and poor solid-solid contact interfaces. In this study, a QSE synthesized by in situ polymerizing methyl methacrylate (MMA) in 1,2-dimethoxyethane (DME)-based electrolyte is introduced, which exhibits remarkable performance in high-loading graphite||LiNi0.8Co0.1Mn0.1O2 (NCM811) pouch cells. Owing to the unique solvent-lacking solvation structure, the graphite exfoliation caused by the well-known solvent co-intercalation is prohibited, and this unprecedented phenomenon is found to be universal for other graphite-unfriendly solvents. The high ionic conductivity and great interfacial contact provided by DME enable the quasi-solid graphite||NCM811 pouch cell to demonstrate superior C-rate capability even at a high cathode mass loading (17.5 mg cm-2), surpassing liquid carbonate electrolyte cells. Meanwhile, the optimized QSE based on carbonates exhibits excellent cycle life (92.4% capacity retention after 1700 cycles at 0.5C/0.5C) and reliable safety under harsh conditions. It also outperforms liquid electrolytes in other high-energy-density batteries with larger volume change. These findings elucidate the polymer's pivotal role in QSEs, offering new insights for advancing quasi-solid-state battery commercialization.

Layer-Dependent Gas Sensing Mechanism of 2D Titanium Carbide (Ti3C2Tx) MXene.

Monolayers of Ti3C2Tx MXene and bilayer structures formed by partially overlapping monolayer flakes exhibit opposite sensing responses to a large scope of molecular analytes. When exposed to reducing analytes, monolayer MXene flakes show increased electrical conductivity, i.e., an n-type behavior, while bilayer structures become less conductive, exhibiting a p-type behavior. On the contrary, both monolayers and bilayers show unidirectional sensing responses with increased resistivity when exposed to oxidizing analytes. The sensing responses of Ti3C2Tx monolayers and bilayers are dominated by entirely different mechanisms. The sensing behavior of MXene monolayers is dictated by the charge transfer from adsorbed molecules and the response direction is consistent with the donor/acceptor properties of the analyte and the intrinsic n-type character of Ti3C2Tx. In contrast, the bilayer MXene structures always show the same response regardless of the donor/acceptor character of the analyte, and the resistivity always increases because of the intercalation of molecules between the Ti3C2Tx layers. This study explains the sensing behavior of bulk MXene sensors based on multiflake assemblies, in which this intercalation mechanism results in universal increase in resistance that for many analytes is seemingly inconsistent with the n-type character of the material. By scaling MXene sensors down from multiflake to single-flake level, we disentangled the charge transfer and intercalation effects and unraveled their contributions. In particular, we show that the charge transfer has a much faster kinetics than the intercalation process. Finally, we demonstrate that the layer-dependent gas sensing properties of MXenes can be employed for the design of sensor devices with enhanced molecular recognition.

A morpho-viscoelasticity theory for growth in proliferating aggregates.

Despite significant research efforts in the continuum modeling of biological growth, certain aspects have been overlooked. For instance, numerous investigations have examined the influence of morphogenetic cell behaviors, like division and intercalation, on the mechanical response of passive (non-growing) tissues. Yet, their impact on active growth dynamics remains inadequately explored. A key reason for this inadequacy stems from challenges in the continuum treatment of cell-level processes. While some coarse-grained models have been proposed to address these shortcomings, a focus on cell division and cell expansion has been missing, rendering them unusable when it comes to modeling growth. Moreover, existing studies are limited to two-dimensional tissues and are yet to be formally extended to three-dimensional multicellular systems. To address these limitations, we here present a generalized multiscale model for three-dimensional aggregates that accounts for complex morphogenetic movements that include division, expansion, and intercalation. The proposed continuum theory thus allows for a comprehensive exploration into the growth and dissipation mechanics of proliferating aggregates, such as spheroids and organoids.

Hydrated Metal Vanadate Heterostructures as Cathode Materials for Stable Aqueous Zinc-Ion Batteries.

Aqueous zinc ion batteries (AZIBs) have received a lot of attention in electrochemical energy storage systems for their low cost, environmental compatibility, and good safety. However, cathode materials still face poor material stability and conductivity, which cause poor reversibility and poor rate performance in AZIBs. Herein, a heterogeneous structure combined with cation pre-intercalation strategies was used to prepare a novel CaV6O16·3H2O@Ni0.24V2O5·nH2O material (CaNiVO) for high-performance Zn storage. Excellent energy storage performance was achieved via the wide interlayer conductive network originating from the interlayer-embedded metal ions and heterointerfaces of the two-phase CaNiVO. Furthermore, this unique structure further showed excellent structural stability and led to fast electron/ion transport dynamics. Benefiting from the heterogeneous structure and cation pre-intercalation strategies, the CaNiVO electrodes showed an impressive specific capacity of 334.7 mAh g-1 at 0.1 A g-1 and a rate performance of 110.3 mAh g-1 at 2 A g-1. Therefore, this paper provides a feasible strategy for designing and optimizing cathode materials with superior Zn ion storage performance.

Room-Temperature CrI3 Magnets through Lithiation.

The pursuit of two-dimensional (2D) magnetism is promising for energy-efficient electronic devices, including magnetoelectric random access memory and radio frequency/microwave magnonics, and it is gaining fundamental insights into quantum sensing technology. The key challenge resides in overseeing magnetic exchange interactions through a precise chemical reduction process, wherein manipulation of the arrangement of atoms and electrons is essential for achieving room-temperature 2D magnetism tailoring in a manner compatible with device architectures. Here, we report an electrochemically crafted CrI3 layered magnet─a van der Waals material─with precisely tailored lithiation and delithiation degrees. The crystalline and packing structure within the intralayer are preserved during the lithium intercalation within the interlayer, owing to weak interlayer coupling. Intrinsic ferromagnetism featuring a Curie temperature reaching 420 K has been unequivocally demonstrated, showcasing a coercivity of 1120 Oe at room temperature. The degree of lithiation through the reduction from Cr3+ to Cr2+ plays a crucial role in determining a 28.5% change in magnetization and a 0.29 eV shift in the bandgap. Room temperature ferromagnetism and magnetoelectricity are critical for noncontact, specifically photon-driven, dynamic magnetism control of 2D magnet-based magnonics devices.

Manipulation of Exchange Bias in Two-Dimensional van der Waals Ferromagnet Near Room Temperature.

As a host for exchange bias (EB), van der Waals (vdW) magnetic materials have exhibited intriguing and distinct functionalities from conventional magnetic materials. The EB in most vdW systems is far below room temperature, which poses a challenge for practical applications. Here, by using Kerr microscopy, we demonstrate a record-high blocking temperature that approaches room temperature and a huge positive EB field that nears 2 kOe at 100 K in naturally oxidized two-dimensional (2D) vdW ferromagnetic Fe3GaTe2 nanoflakes. Moreover, we realized a reversible manipulation of both the presence/absence and positive/negative signs of EB via a training magnetic field without multiple field cooling processes. Thus, our study clearly reveals the robust, sizable, and sign-tunable EB in vdW magnetic materials up to near room temperature, thereby establishing Fe3GaTe2 as an emerging room-temperature-operating vdW material and paving the way for designing practical 2D spintronic devices.