Enhanced visible light photo-Fenton catalysis by Fe-doping oligo-layer natural molybdenite with efficient carrier spatial-driven Fe3+/Fe2+ cycle.

Developing cost-effective and efficient photo-Fenton catalysts is crucial for advancing photo-Fenton technology. MoS2 is a representative transition metal disulfide with attractive photoresponsiveness, making it ideal for preparing composite photo-Fenton catalysts. In this study, natural molybdenite was innovatively utilized as a source of MoS2 (OM) to synthesize a low-cost and efficient Fe@MoS2 (OMF) composite photo-Fenton catalyst by comminution and adsorption, which was then applied to the remediation of antibiotic-contaminated water. The OMF composites exhibited significant catalytic activity, with a kinetic rate constant of 0.022 min-1, which was 3.1 times higher than that of the original OM (0.007 min-1), indicating a 3% increase. This was attributed to the synergistic effect of many photogenerated electrons and reversible Mo4+/Mo6+ redox pairs, which accelerated the regeneration of Fe2+. After three cyclic tests, the concentrations of dissolved Fe2+ and Mo2+ ions remained below 0.38 mg/L and 0.17 mg/L, respectively. This indicates the high reusability of the catalyst in cyclic experiments. Ultimately, the main active species, •OH and •O2 -, were generated during the photo-Fenton process, contributing significantly to TC degradation. This study may serve as a reference for the development and application of natural mineral composite photo-Fenton catalysts in the treatment of organic wastewater.

Structural, elastic, electronic, optical and vibrational properties of single-layered, bilayered and bulk molybdenite MoS2-2H.

In recent years, transition metal dichalcogenides have received great attention since they can be prepared as two-dimensional semiconductors, presenting heterodesmic structures incorporating strong in-plane covalent bonds and weak out-of-plane interactions, with an easy cleavage/exfoliation in single or multiple layers. In this context, molybdenite, the mineralogical name of molybdenum disulfide, MoS2, has drawn much attention because of its very promising physical properties for optoelectronic applications, in particular a band gap that can be tailored with the material's thickness, optical absorption in the visible region and strong light-matter interactions due to the planar exciton confinement effect. Despite this wide interest and the numerous experimental and theoretical articles in the literature, these report on just one or two specific features of bulk and layered MoS2 and sometimes provide conflicting results. For these reasons, presented here is a thorough theoretical analysis of the different aspects of bulk, monolayer and bilayer MoS2 within the density functional theory (DFT) framework and with the DFT-D3 correction to account for long-range interactions. The crystal chemistry, stiffness, and electronic, dielectric/optical and phonon properties of single-layered, bilayered and bulk molybdenite have been investigated, to obtain a consistent and detailed set of data and to assess the variations and cross correlation from the bulk to single- and double-layer units. The simulations show the indirect-direct transition of the band gap (K-K' in the first Brillouin zone) from the bulk to the single-layer structure, which however reverts to an indirect transition when a bilayer is considered. In general, the optical properties are in good agreement with previous experimental measurements using spectroscopic ellipsometry and reflectivity, and with preliminary theoretical simulations.

Mineral-Bound Trace Metals as Cofactors for Anaerobic Biological Nitrogen Fixation.

Nitrogenase is the only known biological enzyme capable of reducing N2 to bioavailable NH3. Most nitrogenases use Mo as a metallocofactor, while alternative cofactors V and Fe are also viable. Both geological and bioinformatic evidence suggest an ancient origin of Mo-based nitrogenase in the Archean, despite the low concentration of dissolved Mo in the Archean oceans. This apparent paradox would be resolvable if mineral-bound Mo were bioavailable for nitrogen fixation by ancient diazotrophs. In this study, the bioavailability of mineral-bound Mo, V, and Fe was determined by incubating an obligately anaerobic diazotroph Clostridium kluyveri with Mo-, V-, and Fe-bearing minerals (molybdenite, cavansite, and ferrihydrite, respectively) and basalt under diazotrophic conditions. The results showed that C. kluyveri utilized mineral-associated metals to express nitrogenase genes and fix nitrogen, as measured by the reverse transcription quantitative polymerase chain reaction and acetylene reduction assay, respectively. C. kluyveri secreted chelating molecules to extract metals from the minerals. As a result of microbial weathering, mineral surface chemistry significantly changed, likely due to surface coating by microbial exudates for metal extraction. These results provide important support for the ancient origin of Mo-based nitrogenase, with profound implications for coevolution of the biosphere and geosphere.

Bioavailability of mineral-associated trace metals as cofactors for nitrogen fixation by Azotobacter vinelandii.

Life on Earth depends on N2 -fixing microbes to make ammonia from atmospheric N2 gas by the nitrogenase enzyme. Most nitrogenases use Mo as a cofactor; however, V and Fe are also possible. N2 fixation was once believed to have evolved during the Archean-Proterozoic times using Fe as a cofactor. However, δ15 N values of paleo-ocean sediments suggest Mo and V cofactors despite their low concentrations in the paleo-oceans. This apparent paradox is based on an untested assumption that only soluble metals are bioavailable. In this study, laboratory experiments were performed to test the bioavailability of mineral-associated trace metals to a model N2 -fixing bacterium Azotobacter vinelandii. N2 fixation was observed when Mo in molybdenite, V in cavansite, and Fe in ferrihydrite were used as the sole sources of cofactors, but the rate of N2 fixation was greatly reduced. A physical separation between minerals and cells further reduced the rate of N2 fixation. Biochemical assays detected five siderophores, including aminochelin, azotochelin, azotobactin, protochelin, and vibrioferrin, as possible chelators to extract metals from minerals. The results of this study demonstrate that mineral-associated trace metals are bioavailable as cofactors of nitrogenases to support N2 fixation in those environments that lack soluble trace metals and may offer a partial answer to the paradox.

Efficient organic contaminant and Cr (VI) synchronous removing by one-step modified molybdenite cathode microbial fuel cells.

As a novel technique with a wide range of applications, microbial fuel cell (MFC) could simultaneously remove organic contaminants and heavy metals in complex wastewater, despite striking differences in physicochemical properties of these contaminant. But its wastewater treatment efficiency is restricted by its lower generation performance. However, approaches for the modification of MFCs' cathode with appropriate catalyst could effectively overcome this limitation. Herein, a new-type efficient cathode catalyst was invented through modifying natural molybdenite via one-step oxidation method. In this case, molybdenite had many changes in morphology (wave-shaped bending, fragmentation and decrescent diameter) during oxidation modification process, and oxidation-modified molybdenite could provide much more active sites for the cathode. After applying this novel cathode catalyst, the electric generation capacity of MFC system increased by 5.08 times, and its simultaneous degradation efficiency of methyl blue (MB) and Cr (VI) increased by 3.35 times (compared with graphite cathode MFC). This study provides a novel low-carbon and environmentally friendly way to prepare high efficiency cathode catalyst materials and provides a new idea of simultaneous purification for organic and metallic pollutants from complex wastewater.

Adsorption Equilibrium and Mechanism and of Water Molecule on the Surfaces of Molybdenite (MoS2) Based on Kinetic Monte-Carlo Method.

The oxidation/weathering of molybdenite (MoS2) is too slow to be monitored, even under pure oxygen and high temperatures, while it proceeds rapidly through humid air. The adsorption of water molecules on molybdenite is necessary for the wet oxidation/weathering of molybdenite. Therefore, we employ kinetic Monte Carlo modeling to clarify the adsorption isotherm, site preferences and kinetics of water on different surfaces of molybdenite. Our results indicate that (1) the adsorption capacity and adsorption rate coefficient of H2O on the (110) surface are significantly larger than those on the (001) surface at a temperature of 0~100 °C and a relative humidity of 0~100%, suggesting that the (110) surface is the predominant surface controlling the reactivity and solubility of molybdenite in its interaction with water; (2) the kinetic Monte Carlo modeling considering the adsorption/desorption rate of H2O, dissociation/formation rate of H2O and adsorption/desorption of dissociated H indicates that the adsorption and dissociation of H2O on the (110) surface can be completed in one microsecond (ms) at 298 K and in wet conditions; (3) the adsorption and dissociation of H2O on molybdenite are not the rate-limiting steps in the wet oxidation/weathering of molybdenite; and (4) kinetic Monte Carlo modeling explains the experimental SIMS observation that H2O and OH (rather than H+/H- or H2O) occupy the surface of MoS2 in a short time. This study provides new molecular-scale insights to aid in our understanding of the oxidation/weathering mechanism of molybdenite as the predominant mineral containing molybdenum in the Earth's crust.

Molecular Dynamics Simulations of the Interactions between a Hydrolyzed Polyacrylamide with the Face and Edge Surfaces of Molybdenite.

Process water used in mineral processing operations corresponds to water recovered from the thickeners and tailings dams, containing residual reagents such as hydrolyzed polyacrylamides (HPAMs). These polymers depress the flotation of different minerals, and their effect on molybdenite has been experimentally demonstrated. The objective of this work was to study the interactions between a segment of a HPAM with the face and edge of molybdenite. The sigma profile, the radial distribution functions of the HPAM, and the orientation and atomic density profiles of water molecules on the face and edge surfaces of molybdenite were calculated. The results obtained from molecular dynamics simulations showed that the interactions between the HPAM and molybdenite are mainly explained by the interactions of the amide group with the faces and edges of the mineral. Molecular dynamics simulations also showed that the HPAM molecule rearranges in such a way that the amide group moves towards the molybdenite face or edge, and the carboxylate group moves away from the mineral surface. The results obtained in the simulations showed that the interactions of the HPAM with the molybdenite edge are slightly stronger than the interaction of this molecule with the mineral face. Simulations demonstrated that the presence of the sodium and hydroxide ions reduces the concentration of HPAM around the face and edge surfaces, which is expected to affect HPAM adsorption on molybdenite. The conclusions obtained through molecular dynamics simulations are in line with the results obtained in previous studies carried out at a macroscopic scale, which reported that HPAMs adsorb onto molybdenite particles and reduce their hydrophobicity.

Understanding the Interaction of Lignosulfonates for the Separation of Molybdenite and Chalcopyrite in Seawater Flotation Processes.

The selective separation of molybdenite from copper sulfide concentrate in flotation process is realized using sodium hydrosulfide (NaHS) to depress the chalcopyrite and permit only the flotation of the molybdenite. However, this reagent is a highly toxic and flammable gas. The objective of this research was to study the feasible application of commercial lignosulfonates (LSs) in the separation by froth flotation process of molybdenite and chalcopyrite in seawater to present a novel application for LSs, as well as an alternative reagent to sodium hydrosulfide (NaHS). To achieve this, microflotation, absorbance tests and zeta potential measures were performed at pH 8 in seawater and 0.01 M NaCl. The results obtained in this study showed that it is possible to achieve selective separation of copper and molybdenum in both aqueous media due to high depressant effect of molybdenite and low depression of chalcopyrite in microflotation tests at 10 ppm of LSs, when the collector, PAX, is added prior to the addition of LSs. Absorbance study and zeta potential measurements showed that LSs adhere more to the molybdenite surface in seawater than in freshwater. This is related to the high ionic charge of the media that influences a greater interaction of LSs with the mineral surface.

Effective peroxymonosulfate activation by natural molybdenite for enhanced atrazine degradation: Role of sulfur vacancy, degradation pathways and mechanism.

In this study, natural molybdenite (MoS2) was applied to activate peroxymonosulfate (PMS) for the removal of atrazine (ATZ) and its degradation mechanism was investigated. Molybdenite exhibits superior catalytic performance. The best condition for atrazine degradation efficiency (>99%) was obtained with molybdenite concentration of 0.4 g/L, PMS concentration of 0.1 mM, and ATZ concentration of 12 µM within 10 min under experimental conditions. Electron paramagnetic resonance (EPR) test and chemical probe test further proved that HO• and SO4•- played important roles in the molybdenite/PMS system, and SO4•- was dominant. Meanwhile, Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) tests showed that sulfur vacancies and edge sulfur played important roles in the system. Edge sulfur was conducive to Mo4+ exposure, while sulfur vacancy facilitated electron transfer and reduced Mo6+ back to Mo4+. Combined with DFT calculation, the role of sulfur in the degradation process was verified. Besides, five ATZ degradation pathways were proposed. Finally, the degradation ability of the molybdenite/PMS system for different pollutants and in actual water bodies was also explored. This work provided ideas for exploring the degradation of organic contaminants by natural minerals.

Natural ore molybdenite as a high-capacity and cheap anode material for advanced lithium-ion capacitors.

Hybrid lithium-ion capacitors (LICs) receive special interests because they work by combining the merits of high-capacity lithium-ion batteries and high-rate capacitors in a Li salt containing electrolyte, so as to bridge the gap between the two devices. One of main challenges for LICs is to develop inexpensive and superior anode materials at high rates. In this work, natural molybdenite was utilized as precursor to achieve the scalable production of cheap MoS2/carbon composites. This molybdenite-derived MoS2/carbon electrode can not only exhibit excellent Li+-storage performances including ultrahigh specific capacity (1427 mAh g-1after 1000 cycles at 1 A g-1) and rate capability (554 mAh g-1at 10 A g-1), but also possess four-times higher tap density than that of commercial graphite. By employing MoS2/carbon as the anode and activated carbon as the cathode, the as-assembled LIC device delivers both high energy//high power density and long cycle lifespan. Furthermore, the price is nearly 200 orders of magnitude lower than the traditional high-purity chemicals, which can be easily scaled up to achieve high-throughput production.

Study of Molybdenite Floatability: Effect of Clays and Seawater.

Current challenges in froth flotation are the presence of complex gangues and the use of low-quality waters, such as seawater. In this scenario, the recovery of molybdenum minerals is difficult, mainly due to the hydrophobic faces' physicochemical changes. In the present study, the natural floatability of pure molybdenite was analyzed by using microflotation assays, and hydrophobicity was measured by performing contact-angle measurements. The impact of two clays, kaolin (non-swelling) and Na-montmorillonite (swelling), was studied. The behavior in freshwater and seawater at pH 8 was compared, considering the current condition of the Cu/Mo mining industries, which use seawater in their operations. The presence of clays lowered the natural floatability of molybdenite precisely because they adhere to the surface and reduce its contact angle. However, the intensity with which they cause this phenomenon depends on the type of water and clay. Kaolin strongly adheres to the valuable mineral in both freshwater and seawater. For its part, Na-montmorillonite does it with greater intensity in a saline medium, but in freshwater, a high concentration of phyllosilicate is required to reduce the hydrophobicity of molybdenite. The clays' adherence was validated by scanning electron microscopy (SEM) analysis.

Synergetic degradation of Methylene Blue through photocatalysis and Fenton reaction on two-dimensional molybdenite-Fe.

The greatest problem in conventional Fenton reaction is the slow production of ROS (reactive oxygen species) because of the inefficient Fe3+/Fe2+ conversion. Based on the extraordinary photo-response property of two-dimensional molybdenite (2DM), photogenerated electrons can be easy separated to accelerate the regeneration of Fe2+. In this work, Fe2+-anchored 2DM (2DM-Fe) was prepared and used as a heterogeneous Fenton catalyst to investigate the degradation efficiency to Methylene Blue (MB) in the presence of light. According to experimental results, 2DM-Fe exhibited extraordinary catalytic activity in MB elimination, which ascribed to the synergetic effect of photogenerated carriers and anchored Fe2+ to H2O2 activation. In addition, 2DM-Fe showed nearly 100% degradation efficiency to MB within 5 cycles with slight leaching amount of Mo and Fe ions, implying the strong stability and reusability in H2O2 system. Furthermore, the influences of H2O2 and 2DM-Fe dosages, pH values as well as the degradation efficiency to different dyes were also investigated. According to quenching experiments and EPR (electron paramagnetic resonance) test, the degradation mechanism of MB mainly ascribed to the oxidation of HO• and •O2-. This finding provides a novel strategy to design rational Fenton catalyst and has great significance to water remediation in the future.

Influence of magnetized water on molybdenite flotation and its mechanism.

Through the flotation test of pure molybdenite and analyses of surface tension, XPS spectrum, zeta potential and contact angle, the influence of magnetized water on the flotation efficiency of pure molybdenite and its mechanism was investigated. The results showed that the recovery of coarse fraction was much higher than that of fine fraction, the magnetized water could significantly decrease the optimum dosages of collector and frother, simultaneously improve the recovery of molybdenite flotation, and the increase of fine fraction was obviously more than that of coarse fraction. The magnetization had little effect on the surface tension and dissolved oxygen of water, but obviously decreased the conductivity of water and pulp, which was beneficial to restrain molybdenite edge oxidation in water. The XPS test showed that the oxidation degree of molybdenite in magnetized water was obviously lower than that in unmagnetized water, which illustrated that the magnetized water could keep the natural floatability of molybdenite. The absolute value of the zeta potential and the contact angle of the molybdenite were increased after the treatment of magnetized water, which further verified that the magnetized water could help to inhibit molybdenite edge oxidation in water and improve the flotation efficiency of molybdenite.

Mechanism of Microwave Activation on Molybdenite.

The effect of microwave activation on the properties of oxidation roasting for molybdenite was investigated under the protection of inert gas, and the specific surface area, the oxidation properties, lattice constant, microstructure, and shape of molybdenite were analyzed and characterized by a laser particle size analyzer, thermogravimetry (TG), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results show that microwave activation could effectively reduce the residual amount of sulfur in the molybdenum calcine and decrease the average particle size of molybdenite while increasing the specific surface area of molybdenite. On increasing the microwave activation power, the crystal cell volume and grain size of MoS2 reduced, and the microstrain increased slightly. At the same time, the surface shape of molybdenite became looser, but the layered structure is not changed. In addition, the oxidation property changed significantly; microwave activation promoted the oxidation reaction of molybdenite above 538 °C, and the rate of weight loss increased from 6.177% to 7.718% at 620 °C.

Recent progress on research of molybdenite flotation: A review.

Molybdenum is an important alloy element for metallurgical industry because of its high temperature stability. As the major mineral reserve for molybdenum, molybdenite (MoS2) is commonly found in porphyry copper deposits. Molybdenite is naturally floatable and can be separated from copper sulfide mineral using froth flotation. Properties of molybdenite such as mineralogy, microstructure, surface wettability, zeta potential, etc. can have a great effect on its floatability. Organic and inorganic depressants and surface pre-treatment methods are applied to improve the recovery of molybdenite. Electrochemical potential measurements using different electrodes are used to monitor process conditions and enable processing parameter adjustments to improve flotation circuit performance and reduce operating costs. Cations like Ca2+ and Mg2+ are reported to have negative effects on the flotation of molybdenite in alkaline solution, and dispersants and oil collectors need to be added to restore the flotation of molybdenite. In addition, effects of gangue minerals, particle size, and oil collectors and surfactants on molybdenite recovery are also discussed in this manuscript.

High temperature induced S vacancies in natural molybdenite for robust electrocatalytic nitrogen reduction.

Defect engineering is an important strategy to regulate electronic structure of electrocatalysts for electrochemical N2 fixation, aiming at improving the electron state density and enhancing the adsorption and activation of inert N2. In this paper, a high-temperature strategy to anneal the natural molybdenite under Ar atmosphere was developed, and the as-obtained molybdenite with S vacancies boosted a high activity for N2 reduction reaction. In 0.1 M HCl, the catalyst annealed at 800 °C exhibits a high Faradic efficiency of 17.9% and a NH3 yield of 23.38 µg h-1 mg-1cat. at -0.35 V versus reversible hydrogen electrode, two times higher than that of the pristine molybdenite. The facile one-step annealing method introduces the defects (e.g., S vacancies) in the surface of the natural molybdenite particles to prepare catalysts for generating ammonia by reducing nitrogen at room temperature under ordinary pressure, promoting the development of low-carbon economic prospect.

Molten Electrolyte-Modulated Electrosynthesis of Multi-Anion Mo-Based Lamellar Nanohybrids Derived from Natural Minerals for Boosting Hydrogen Evolution.

The multi-anion molybdenum-based nanohybrids, N-doped ß-Mo2C/MoP/MoOx (denoted as MoCPO), serving as a highly efficient catalyst for hydrogen evolution reaction (HER), are fabricated via a simple and scalable electrosynthesis in molten NaCl-KCl, which integrates pyrolysis/electroreduction/compounding into a one-pot strategy using polyphosphazenes (PPAs) and earth-abundant molybdenite (mainly MoS2) as precursors. The deliberately selected PPA and molten electrolyte ensure the unique lamellar nanostructures and the blending of multiple anions of C, N, P, and O in the obtained catalyst, specifically, triggering the in situ formation of the structural oxygen vacancies (VO) in MoCPO. The nature of the hybrids can be regulated by adjusting the synthesis condition. The optimized hybrid displays a low overpotential of 99.2 mV at 10 mA cm-2 for HER in 0.5 M H2SO4 and stays active over a broad pH range. The theoretical calculations reveal that VO in the hybrids serves as favorable active sites, thus contributing to the superior HER activity. Moreover, MoCPO is also effective for overall water splitting as a bifunctional catalyst.

Effects of Sodium Alginate on the Flotation Separation of Molybdenite From Chalcopyrite Using Kerosene as Collector.

In this paper, the effect of sodium alginate (SA) on the flotation separation of molybdenite (MoS2) from chalcopyrite using kerosene as collector was systematically investigated. The results of single-mineral micro-flotation tests indicated that SA exhibited strong depression on chalcopyrite flotation while it imposed no impact on the floatability of molybdenite. However, in the chalcopyrite-molybdenite mixed-mineral flotation system, the presence of chalcopyrite significantly increased the depressing effect of SA on molybdenite flotation, leading to a considerable reduction in the flotation selectivity. The negative impact of chalcopyrite on the performance of SA in molybdenite flotation was eliminated by adding a certain dosage of kerosene prior to SA. A concentrate containing 53.43% of molybdenum (Mo) was obtained at 76.90% of recovery using 19 mg/L kerosene and 40 mg/L SA at pH 5.4. Zeta potential measurements indicated that the adsorption of SA on chalcopyrite surfaces was stronger than that on molybdenite surfaces, which agreed with the single-mineral flotation test results. The adsorption of SA on chalcopyrite was further confirmed to be chemisorption by Fourier-transform infrared spectroscopy (FTIR) spectra analyses. When Cu2+ appeared in solution, the flotation of molybdenite was strongly depressed by SA. Mechanism analyses indicated that more active sites were generated on molybdenite surfaces after the addition of Cu2+, thus promoting the adsorption of SA.

A Sensitive Electrochemical Ascorbic Acid Sensor Using Glassy Carbon Electrode Modified by Molybdenite with Electrodeposited Methylene Blue.

A non-enzymatic amperometric sensor using natural molybdenite (MLN) electrodeposited with methylene blue (MB) has been fabricated and characterized and its analytical performances were investigated for the determination of ascorbic acid (AA). The surface morphology of the electrode modified by electrodeposited MB was studied by use of the Advanced Mineral Identification and Characterization System (AMICS) and laser confocal high-temperature scanning microscope (LCSM). The poly(MB) and MLN immobilized sensor showed good stability, reproducibility, sensitivity, and selectivity. It exhibited a linear performance range from 3 to 1000 µM, with a lower detection limit of 0.083 µM (signal/noise = 3) and short response time (< 5 s). No obvious decrease in the current was observed after 20 days storage. The methodology reproducibility of this sensor was 2.6%. It showed good anti-interference ability for the potential interfering compounds. The poly(MB) film not only can enhance the electron-transfer rate but also increase the lifetime of the sensor. This study demonstrated the applicability of natural molybdenite for the fabrication of non-enzymatic electrochemical AA sensor.

Electrochemical investigation of the interactions of organic and inorganic depressants on basal and edge planes of molybdenite.

Molybdenite (MoS2) has attracted great attention in the field of advanced materials. MoS2 is normally separated from other minerals by selective flotation, and chemical reagents (so-called depressants) are required to lower the surface hydrophobicity of MoS2. Previous studies had controversial arguments on the adsorption of organic and inorganic depressants, i.e., carboxymethyl cellulose (CMC), Ca2+ and Mg2+ on the anisotropic MoS2 surfaces. Therefore, in this work, the interactions of these depressants on MoS2 basal and edge surfaces in alkaline solutions were investigated using electrochemical techniques. The MoS2 edge surface had higher electrochemical reactivity than the basal surface, and the electrochemical reactivity of both the surfaces reduced after treatment in CMC, Ca2+ and Mg2+ solutions, which suggested that the depressants adsorbed on both basal and edge surfaces. The cyclic voltammetry and scanning electrochemical microscopy results indicated that the coverage of adsorbed inorganic species, i.e., Ca(OH)2, CaCO3 and Mg(OH)2 particles, on MoS2 basal and edge surfaces was lower than that of CMC. The randomly distributed hydrophilic Ca(OH)2, CaCO3 and Mg(OH)2 particles on MoS2 basal surface reduced the possibility of bubble attachment, which was the main reason for the depressed MoS2 floatability reported in the literature.