An affordable, field-deployable detecting system for cyanide ion - Investigating applications in real time uses.

A highly efficient system that incorporates the instantaneous visualization of the cyanide ion in water was synthesized by keeping the fluorophore system (electron donor) as a julolidine-coumarin conjugate and changing the electron acceptor unit. The probes exhibit a notable color change in normal and UV light. The probe interaction modalities are based on the ICT process. With a detection limit in the nM range, it may preferentially react with cyanide, which is less than the tolerable level of 1.9 µM. According to 1H NMR data, the probes detect cyanide ions by nucleophilic addition reaction mechanism. Furthermore, current probe successfully determines real resources, including cyanide containing cassava powder, sprouted potatoes and various water samples. Besides the test strips, an electronic Arduino device was also employed to detect the cyanide ion. As such, the developed probes exhibit outstanding practical application with respect to the cyanide ion.

Redox-Induced Aromatic Substitution: A Study on Guanidino-Functionalized Aromatics.

Aromatic substitution of redox-active aromatic compounds could be initiated by a preceding redox step. We report on the different reaction pathways of such redox-induced substitution (RIAS) reactions between a redox-active guanidino-functionalized aromatic molecule (GFA) and an amine or guanidine. Oxidation of the GFA leads to an umpolung of the guanidine from a nucleophile to an electrophile and thereby enables addition of the amine or guanidine. Several examples are given, demonstrating the use of redox substitution in synthetic chemistry, e.g. for the convenient synthesis of novel N-heteropolycyclic molecules and unsymmetrically-substituted aromatics.

Enantio- and Diastereoselective Desymmetrization of 1,1'-Biaryl-2,6-dicarbaldehydes by Copper-Catalyzed 1,2-Addition of Silicon Nucleophiles.

A desymmetrizing 1,2-addition of silicon nucleophiles to biaryl derivatives containing an 2,6-dicarbaldehyde-1-yl unit is reported. The reaction is catalyzed by copper with a triazolium-derived N-heterocyclic carbene as the chiral ligand and an Si-B reagent as the silicon pronucleophile. The practical methodology furnishes axially chiral aromatic carbaldehydes decorated with a centrally chiral α-hydroxysilane moiety in moderate to high yields and with high enantio- as well as excellent diastereoselectivities. The silicon nucleophile always attacks at either carbonyl group away from the ortho substituent on the phenyl ring at C1 of the 2,6-dicarbaldehyde-1-yl fragment. The resulting axially and centrally chiral products can be further converted into valuable biaryl compounds with hardly any erosion of the enantiomeric excess.

Synthesis and Antitumor Activity of Some New N1-(8-fluoro-4-oxoquinolin-5-yl)amidrazones.

BACKGROUND: Hydrazonoyl chloride, accessible from the respective 5-amino-8-fluoro- 4-oxoquinoline-3-carboxylate, undergoes a reaction with sec-cyclic amines to generate N1-(1- ethyl-8-fluoro-4-oxoquinolin-5-yl)amidrazone carboxylates. INTRODUCTION: A novel set of N1-(1-ethyl-8-fluoro-4-oxoquinolin-5-yl)amidrazone carboxylates (7a-h) incorporating N-piperazines or related congeners was synthesized via interaction of the hydrazonoyl chloride (6), accessible from the respective 5-amino-8-fluoro-4-oxoquinoline-3-carboxylate, with the appropriate sec-cyclic amine. These new compounds were characterized by 1HNMR, 13C-NMR, and HRMS spectral data and screened for their anticancer activities. AIMS: This study aimed at the synthesis of novel N1-( 4-oxoquinolin-5-yl)amidrazone carboxylate derivatives and investigated their potential as anticancer agents. OBJECTIVE: The reaction of hydrazonoyl chloride with the appropriate sec-cyclic amine was applied to synthesize a novel set of N1-(1-ethyl-8-fluoro-4-oxoquinolin-5- yl)amidrazone carboxylates that incorporate N piperazines. METHODS: A direct reaction of piperazines and related sec-cyclic amines with N-(4-oxoquinolin-5- yl)nitrile imine (1,3-dipole) was carried out for 8-10 h. RESULTS: The 1,3-dipole, generated in situ from its hydrazonoyl chloride precursor in the presence of trimethylamine, is suitable for the facile synthesis of N1-(1-ethyl-8-fluoro-4-oxoquinolin-5- yl)amidrazone carboxylates. CONCLUSION: This study led to the successful synthesis of novel N1-(8-fluoro-4-oxoquinolin-5- yl)amidrazones. All the examined compounds showed moderate activity with reasonable IC50 values in the micromolar range compared to Doxorubicin.

Contribution of complexed Fe(â ¡) oxygenation to norfloxacin humification and stabilization: Producing and trapping of more humified products.

Organic pollutants polymerization in advanced oxidation processes or environmental matrices has attracted increasing attention, but little is known about stabilization of the polymerization products. The results in this work revealed the contribution of Fe(Ⅱ) oxygenation to stabilization of the products from norfloxacin (NOR) humification. It was found that upon oxygenation of Fe(Ⅱ) complexed by catechol (CT), NOR polymerized into the products with larger molecular weight through nucleophilic addition. Around 83.9-89.7 % organic carbon (OC) can be retained in the reaction solution and the precipitates at different Fe(II)/CT molar ratio. In this system with humification potential, the produced hydroxyl radical (HO•) dominantly modified, instead of decomposed, the structure of transformation products (TPs). TPs with diversified side chains were formed through hydroxylation and ring-opening, leading to the more humified products. In the subsequent Fe(Ⅱ) oxidative precipitation, Fe-TPs composites were formed as spherical particle clusters, which could steadily incorporate OC species with molecular fractionation. Specifically, lignin-like, tannins-like, condensed aromatic and high-molecular-weight TPs were preferentially preserved in the precipitates, while the recalcitrant aliphatic products mainly retained in the solution. These findings shed light on the role of Fe(Ⅱ) oxygenation in stabilizing the products from pollutants humification, which could strengthen both decontamination and organics sequestration.

1,6-Nucleophilic Di- and Trifluoromethylation of para-Quinone Methides with Me3SiCF2H/Me3SiCF3 Facilitated by CsF/18-Crown-6.

The direct 1,6-nucleophilic difluoromethylation, trifluoromethylation, and difluoroalkylation of para-quinone methides (p-QMs) with Me3SiRf (Rf = CF2H, CF3, CF2CF3, CF2COOEt, and CF2SPh) under mild conditions are described. Although Me3SiCF2H shows lower reactivity than Me3SiCF3, it can react with p-QMs promoted by CsF/18-Crown-6 to give structurally diverse difluoromethyl products in good yields. The products can then be further converted into fluoroalkylated para-quinone methides and α-fluoroalkylated diarylmethanes.

Ferromanganese oxide-functionalized TiO2 for rapid catalytic ozonation of PPCPs through a coordinated oxidation process with adjusted composition and strengthened generation of reactive oxygen species.

Ferromanganese oxide (MFOx) was first utilized to functionalize TiO2 and an MFOx@TiO2 catalyst was developed for catalytic ozonation for rapid attack of pharmaceutical and personal care products (PPCPs) with adjusted reactive oxygen species (ROSs) composition and strengthened ROSs generation. Unlike Al2O3, which strongly relied on adsorption and was significantly influenced by MFOx loading, synergistic catalytical effects of MFOx and TiO2 were observed, and optimal MFOx doping of 2 wt% and MFOx@TiO2 dosage of 500 ppm were obtained for catalyzing ozonation. In ibuprofen (IBP) degradation, MFOx@TiO2-catalyzed ozonation (MFOx@TiO2/O3) obtained 2.0-, 4.7- and 6.9-folds the kobs of TiO2/O3, MFOx/O3 and bare ozonation (B/O3). Stronger O3 decomposition was observed by MFOx@TiO2 over bare TiO2 with the participation of redox pairs Fe(II)/Fe(III) and Mn(II)/Mn(III)/Mn(IV) and increased surface oxygen vacancies (SOVs) from 9.8 % to 33.7 % was detected. The results revealed that Fe(II), Mn(II) and Mn(III) with low valance accelerated Ti(III) generation from Ti(VI), obtaining an unprecedented high Ti(III) composition occupying 35.3 % of the total Ti atoms. Ti(III) catalyzed the direct reduction of SOVs-O2 to •O2-, and it accelerated the formation of Ti(VI)-OH and Ti(VI)-O which catalyzed O3 decomposition into •O2-. •O2- was found to primarily initiate IBP degradation with nucleophilic addition and dominated over 66 % IBP removal. The enhanced •O2- generation further strengthened •OH and 1O2 production. MFOx@TiO2/O3 obtained 17 %, 21 % and 30 % higher TOC removal over TiO2/O3, MFOx/O3 and B/O3, respectively. Acute toxicity tests confirmed the effective toxicity control of organics by MFOx@TiO2/O3 process (inhibition rate: 10.9 %). Degradation test of atenolol and sulfamethoxazole confirmed the catalytic effects of MFOx@TiO2. MFOx@TiO2 performed strong resistance to water matrix in application test and showed good stability and reusability. The study proposed an effective catalyst for strengthening the ozonation process on PPCPs degradation and provided an in-depth understanding of the mechanisms and characteristics of the MFOx@TiO2 catalyst and MFOx@TiO2/O3 process.

Double difunctionalization of vinyl ether tethered nucleophile with electron-deficient alkene in two-molecule photoredox system.

Double difunctionalization of a vinyl ether tethered hydroxy or carbamoyl group with electron-deficient alkenes such as acrylonitrile or acrylic esters was achieved by visible-light irradiation in a two-molecule photoredox system. Use of anhydrous acetonitrile solution as a solvent promoted both dimerization of the radical cation of electron-rich alkene with electron-rich alkene and intramolecular nucleophilic addition to generate an electron-rich radical that was added to electron-deficient alkene to furnish the double difunctionalized product. A variety of electronically differentiated rich and deficient alkenes were used in the photoreaction; a simple construction of a complex carbon framework containing acetal from simple alkenes was successful under mild conditions.

Cytotoxic Cyclolignans Obtained by the Enlargement of the Cyclolignan Skeleton of Podophyllic Aldehyde, a Selective Podophyllotoxin-Derived Cyclolignan.

Podophyllotoxin, a cyclolignan natural product, has been the object of extensive chemomodulation to obtain better chemotherapeutic agents. Among the obtained podophyllotoxin derivatives, podophyllic aldehyde showed very interesting potency and selectivity against several tumoral cell lines, so it became our lead compound for further modifications, as described in this work, oriented toward the enlargement of the cyclolignan skeleton. Thus, modifications performed at the aldehyde function included nucleophilic addition reactions and the incorporation of the aldehyde carbon into several five-membered rings, such as thiazolidinones and benzo-fused azoles. The synthesized derivatives were evaluated against several types of cancer cells, and although some compounds were cytotoxic at the nanomolar range, most of them were less potent and less selective than the parent compound podophyllic aldehyde, with the most potent being those having the lactone ring of podophyllotoxin. In silico ADME evaluation predicted good druggability for most of them. The results indicate that the γ-lactone ring is important for potency, while the α,ß-unsaturated aldehyde is necessary to induce selectivity in these cyclolignans.

CO Oxidation Mechanism of Silver-Substituted Mo/Cu CO-Dehydrogenase - Analogies and Differences to the Native Enzyme.

The aerobic oxidation of carbon monoxide to carbon dioxide is catalysed by the Mo/Cu-containing CO-dehydrogenase enzyme in the soil bacterium Oligotropha carboxidovorans, enabling the organism to grow on the small gas molecule as carbon and energy source. It was shown experimentally that silver can be substituted for copper in the active site of Mo/Cu CODH to yield a functional enzyme. In this study, we employed QM/MM calculations to investigate whether the reaction mechanism of the silver-substituted enzyme is similar to that of the native enzyme. Our results suggest that the Ag-substituted enzyme can oxidize CO and release CO2 following the same reaction steps as the native enzyme, with a computed rate-limiting step of 10.4 kcal/mol, consistent with experimental findings. Surprisingly, lower activation energies for C-O bond formation have been found in the presence of silver. Furthermore, comparison of rate constants for reduction of copper- and silver-containing enzymes suggests a discrepancy in the transition state stabilization upon silver substitution. We also evaluated the effects that differences in the water-active site interaction may exert on the overall energy profile of catalysis. Finally, the formation of a thiocarbonate intermediate along the catalytic pathway was found to be energetically unfavorable for the Ag-substituted enzyme. This finding aligns with the hypothesis proposed for the wild-type form, suggesting that the creation of such species may not be necessary for the enzymatic catalysis of CO oxidation.

Tailored fluorophore design: Enhancing selectivity for cyanide ion sensing in water and food samples, and innovative device development.

A rigid fluorophore unit of Julolidine/coumarin fused with an indolium-conjugated system was built for the immediate and effective recognition of cyanide ions in a 90 % aq. DMSO solution. The probes are capable of displaying better sensitivity/selectivity for the cyanide ion over a wide range of other interfering ions. The probe JI showed an instant colorimetric variation, whereas the modified probe JCI showed both colorimetric and fluorimetric variation with cyanide ion. The observed detection limit values indicated excellent sensitivity of the probe to the cyanide ion. HRMS and 1H NMR studies confirmed that the mechanism of detection of CN- is via the nucleophilic attack on the electron-deficient indolium moiety of the molecule. Moreover, the probes are well proficient in selective recognition of cyanide in various real time applications (test strips, electronic sensor kit, food and water sample analysis).

One-Flow Synthesis of Substituted Indoles via Sequential 1,2-Addition/Nucleophilic Substitution of Indolyl-3-Carbaldehydes.

Substituted indoles are important as drugs. A number of valuable indoles have been synthesized via nucleophilic substitution at the 3'-position of indoles. However, the preparation of an indolylmethyl electrophile containing a tertiary carbon at the 3'-position and its subsequent nucleophilic substitution are challenging owing to the instability of the electrophile. Herein, we demonstrated the rapid one-flow synthesis of indoles via sequential 1,2-addition/nucleophilic substitution of indolyl-3-carbaldehydes. The use of a microflow technology helped in suppressing the undesired reactions caused by the unstable intermediates, resulting in significantly higher yields and reproducibility compared to those under batch conditions. A crown ether was effective when 1-alkylindole-3-carboxaldehyde was used as a substrate. However, the crown ether exerted a detrimental effect when 1H-indole-3-carboxaldehyde was used. A total of 15 structurally diverse indole derivatives were obtained in generally acceptable to good yields.

Base-Catalyzed Nucleophilic Addition Reaction of Indoles with Vinylene Carbonate: An Approach to Synthesize 4-Indolyl-1,3-dioxolanones.

The N-functionalized indole is a privileged structural framework in a wide range of bioactive molecules. The nucleophilic addition between indoles with vinylene carbonate proceeded smoothly in the presence of K2CO3 as the catalyst to produce novel indolyl-containing skeletons and 4-indolyl-1,3-dioxolanones in satisfactory to excellent yields (up to >97% yield). Various synthetically useful functional groups, such as halogen atoms, cyano, nitro, and methoxycarbonyl groups, remained intact during the regioselective N-H addition reactions. The developed catalytic system also could accommodate 2-naphthalenol to achieve the target O-H additive product in good yield.

An Oxidant-Free and Mild Strategy for Quinazolin-4(3H)-One Synthesis via CuAAC/Ring Cleavage Reaction.

An oxidant-free and highly efficient synthesis of phenolic quinazolin-4(3H)-ones was achieved by simply stirring a mixture of 2-aminobenzamides, sulfonyl azides, and terminal alkynes. The intermediate N-sulfonylketenimine underwent two nucleophilic additions and the sulfonyl group eliminated through the power of aromatization. The natural product 2-(4-hydroxybenzyl)quinazolin-4(3H)-one can be synthesized on a large scale under mild conditions with this method.

Origin of the Bürgi-Dunitz Angle.

The Bürgi-Dunitz (BD) angle plays a pivotal role in organic chemistry to rationalize the nucleophilic addition to carbonyl groups. Yet, the origin of the obtuse trajectory of the nucleophile remains incompletely understood. Herein, we quantify the importance of the underlying physical factors quantum chemically. The obtuse BD angle appears to originate from the concerted action of a reduced Pauli repulsion between the nucleophile HOMO and carbonyl π bond, a more stabilizing HOMO-π*-LUMO(C=O) interaction, as well as a more favorable electrostatic attraction.

A novel chromophore reaction-based pyrrolopyrrole aza-BODIPY fluorescent probe for H2S detection and its application in food spoilage.

In this work, we developed an aggregation-induced emission enhancement (AIEE) active and NIR emissive pyrrolopyrrole aza-BODIPY (PPAB) polymer (P1) for H2S detection for the first time. P1 showed obvious colorimetric change from green to yellow-green and ratiometric fluorescence "turn on" phenomenon with 167 nm blue-shift (from dark red to bright green). The sensing mechanism revealed a novel chromophore reaction between imine in PPAB core and H2S was involved, leading to less conjugated product. It exhibited distinct advantages of good selectivity, high sensitivity, and low detection limit of 0.66 µM. The potential applicability of P1 for H2S detection in the real samples (tap water, lake water and milk) was demonstrated. In addition, the solid sensor prepared by loading P1 on the PMMA film was successfully realized the visual detection of gaseous H2S gas produced from egg spoilage. Therefore, this work provides a promising approach based on novel sensing mechanism for monitoring H2S in complicated biological systems and practical food samples.

Analogy of the Reactions of Aromatic and Aliphatic π-Electrophiles with Nucleophiles.

The aim of this essay is to disclose the similarity of a great variety of reactions that proceed between nucleophiles and π-electrophiles-both aromatic and aliphatic. These reactions proceed via initial reversible addition, followed by a variety of transformations that are common for the adducts of both aliphatic and aromatic electrophiles. We hope that understanding of this analogy should help to expand the scope of the known reactions and inspire the search for new reactions that were overlooked.

Introducing Water and Deep Eutectic Solvents in Organosodium Chemistry: Chemoselective Nucleophilic Functionalizations in Air.

Advancing the development of perfecting the use of polar organometallics in bio-inspired solvents, we report on the effective generation in batch of organosodium compounds, by the oxidative addition of a C-Cl bond to sodium, a halogen/sodium exchange, or by direct sodiation, when using sodium bricks or neopentylsodium in hexane as sodium sources. C(sp3 )-, C(sp2 )-, and C(sp)-hybridized alkyl and (hetero)aryl sodiated species have been chemoselectively trapped (in competition with protonolysis), with a variety of electrophiles when working "on water", or in biodegradable choline chloride/urea or L-proline/glycerol eutectic mixtures, under hydrous conditions and at room temperature. Additional benefits include a very short reaction time (20 s), a wide substrate scope, and good to excellent yields (up to 98 %) of the desired adducts. The practicality of the proposed protocol was demonstrated by setting up a sodium-mediated multigram-scale synthesis of the anticholinergic drug orphenadrine.

Synthesis and characterization of phenothiazine sensor for spectrophotometric and fluorescence detection of cyanide.

A sensitive and selective phenothiazine-based sensor (PTZ) has been successfully synthesized. The sensor PTZ displayed specific identification of CN- 'turn-off' fluorescence responses with a quick reaction and strong reversibility in an acetonitrile:water (90:10, V/V) solution. The sensor PTZ for detecting CN- exhibits the marked advantages of quenching the fluorescence intensity, fast response time (60 s), and low value of the detection limit. The concentration that is authorized for drinking water by the WHO (1.9 µM) is far higher than the detection limit, which was found to be 9.11 × 10-9 . The sensor displays distinct colorimetric and spectrofluorometric detection for CN- anion due to the addition of CN- anion to the electron-deficient vinyl group of PTZ, which reduces intramolecular charge transfer efficiencies. The 1:2 binding mechanism of PTZ with CN- was validated by fluorescence titration, Job's plot, HRMS, 1 H NMR, FTIR analysis, and density functional theory (DFT) investigations, among other methods. Additionally, the PTZ sensor was successfully used to precisely and accurately detect cyanide anions in actual water samples.

Dual-Responsive Benzo-Hemicyanine-Based Fluorescent Probe for Detection of Cyanide and Hydrogen Sulfide: Real-Time Application in Identification of Food Spoilage.

Colorimetric and fluorescent probes have received a lot of attention for detecting lethal analytes in realistic systems and in living things. Herein, a dual-approachable Benzo-hemicyaninebased red-emitting fluorescent probe PBiSMe, for distinct and instantaneous detection of CN- and HS- was synthesized. The PBiSMe emitted red fluorescence (570 nm) can switch to turn-off (570 nm) and blue fluorescence (465 nm) in response to CN- and HS-, respectively. Other nucleophilic reagents, such as reactive sulfur species (RSS) and anions, have no contact or interference with the probe; instead, a unique approach is undertaken to exclusively interact with CN- and HS- over a wide pH range. The measured detection limits for CN- (0.43 µM) and HS- (0.22 µM) ions are lower than the World Health Organization's (WHO) recommended levels in drinking water. We confirmed 1:1 stoichiometry ratio using Job's plot and observed good quantum yield for both analytes. The probe-coated paper strips were used to detect the H2S gas produced by food spoilage (such as eggs, raw meat, and fish) via an eye-catching visual response. Moreover, fluorescence bioimaging studies of living cells was done to confirm the probe's potential by monitoring the presence of CN- and HS- in a living system.