A novel electrochemical sensor for rapid detection of sulfathiazole by integrating [(4,4'-bipy/P2Mo17Co)n] modified electrode.

In this study, we focused on the successful construction of [(4,4'-bipy/P2Mo17Co)6] modified electrodes using the layer-by-layer assembly method for the sensitive detection of sulfathiazole (ST). The redox reaction between ST and the metal ions in the modified layer leads to the transfer of electrons, resulting in the generation of the electrical signal. The introduction of 4,4'-bipyridine (4,4'-bipy) enhanced the molecular recognition of ST by the modified electrode. Under the combined effect of P2Mo17Co and 4,4'-bipy, the sensor exhibited good performance for ST detection (LOD: 0.5616 µM, linear ST concentration range: 0-50 µM). The spiked recoveries of the two groups were 84.4%-103.2% and 90.9%-109.4% for the determination of ST residues in large yellow croaker and South American white shrimp, respectively. In addition, the electrode showed excellent performance in terms of stability, reproducibility, and anti-interference ability.

miRNA-based electrochemical biosensors for ovarian cancer.

Ovarian cancer, a prevalent and deadly cancer among women, presents a significant challenge for early detection due to its heterogeneous nature. MicroRNAs, short non-coding regulatory RNA fragments, play a role in various cellular processes. Aberrant expression of these microRNAs has been observed in the carcinogenesis-related processes of many cancer types. Numerous studies highlight the critical role of microRNAs in the initiation and progression of ovarian cancer. Given their clinical importance and predictive value, there has been considerable interest in developing simple, prompt, and sensitive miRNA biosensor strategies. Among these, electrochemical sensors have demonstrated advantageous characteristics such as simplicity, sensitivity, low cost, and scalability. These microRNA-based electrochemical biosensors are valuable tools for early detection and point-of-care applications. This article discusses the potential role of microRNAs in ovarian cancer and recent advances in the development of electrochemical biosensors for miRNA detection in ovarian cancer samples.

Recent advances in electrochemical approaches for detection of nitrite in food samples.

Nitrite is a common ingredient in the industry and agriculture; it is everywhere, like water, food, and surroundings. Recently, several approaches have been developed to measure the nitrite levels. So, this review was presented as a summary of many approaches utilized to detect the nitrite. Furthermore, the types of information that may be acquired using these methodologies, including optic and electrical signals, were discussed. In electrical signal methods, electrochemical sensors are usually developed using different materials, including carbon, polymers, oxides, and hydroxides. At the same time, optic signals receiving techniques involve utilizing fluorescence chromatography, absorption, and spectrometry instruments. Furthermore, these methodologies' benefits, drawbacks, and restrictions are examined. Lastly, due to the efficiency and fast means of electrochemical detectors, it was suggested that they can be used for detecting nitrite in food safety. Futuristic advancements in the techniques used for nitrite determination are subsequently outlined.

Hemiporphycene: A pH-tunable specific probe for Zn2+ and Cu2.

Porphyrins and their isomers possess high affinity towards the formation of complexes with metal cations, but their use for the determination of metal cations is rather limited, due to low selectivity. In this study, we have investigated the unsubstituted hemiporphycene, which shows a highly irregular shape of the inner cavity, and very different reactivity with various metal cations in methanol:water solutions. It was found that hemiporphycene can act as a pH-tunable specific probe for the determination of Zn2+ at pH 8.6 and specific for Cu2+ detection at pH 5.5.

Wide-temperature-range pressure sensing by an aramid nanofibers/reduced graphene oxide flakes composite aerogel.

Aerogel-based conductive materials have emerged as a major candidate for piezoresistive pressure sensors due to their excellent mechanical and electrical performance besides light-weighted and low-cost characteristics, showing great potential for applications in electronic skins, biomedicine, robot controlling and intelligent recognition. However, it remains a grand challenge for these piezoresistive sensors to achieve a high sensitivity across a wide working temperature range. Herein, we report a highly flexible and ultra-light composite aerogel consisting of aramid nanofibers (ANFs) and reduced graphene oxide flakes (rGOFs) for application as a high-performance pressure sensing material in a wide temperature range. By controlling the orientations of pores in the composite framework, the aerogel promotes pressure transfer by aligning its conductive channels. As a result, the ANFs/rGOFs aerogel-based piezoresistive sensor exhibits a high sensitivity of up to 7.10 kPa-1, an excellent stability over 12,000 cycles, and an ultra-wide working temperature range from -196 to 200 °C. It is anticipated that the ANFs/rGOFs composite aerogel can be used as reliable sensing materials in extreme environments.

Biomaterials for reliable wearable health monitoring: Applications in skin and eye integration.

Recent advancements in biomaterials have significantly impacted wearable health monitoring, creating opportunities for personalized and non-invasive health assessments. These developments address the growing demand for customized healthcare solutions. Durability is a critical factor for biomaterials in wearable applications, as they must withstand diverse wearing conditions effectively. Therefore, there is a heightened focus on developing biomaterials that maintain robust and stable functionalities, essential for advancing wearable sensing technologies. This review examines the biomaterials used in wearable sensors, specifically those interfaced with human skin and eyes, highlighting essential strategies for achieving long-lasting and stable performance. We specifically discuss three main categories of biomaterials-hydrogels, fibers, and hybrid materials-each offering distinct properties ideal for use in durable wearable health monitoring systems. Moreover, we delve into the latest advancements in biomaterial-based sensors, which hold the potential to facilitate early disease detection, preventative interventions, and tailored healthcare approaches. We also address ongoing challenges and suggest future directions for research on material-based wearable sensors to encourage continuous innovation in this dynamic field.

Clinical Interventions Following Escalations from a Continuous Respiratory Monitoring Service in Patients With Chronic Obstructive Pulmonary Disease.

Background: Continuous respiratory monitoring can support integrated care for chronic obstructive pulmonary disease (COPD) patients, by coupling them with remote clinical personnel who triage patients in coordination with their health care providers. When deploying such services, there remains uncertainty surrounding outcomes when at-risk patients are proactively identified and escalated for provider evaluation. This study presents findings from a service deployed in a real-world COPD cohort by analyzing the clinical interventions made during in-person and telehealth pulmonary outpatient visits following remote escalations. Methods: A single-center, retrospective, observational study of real-world COPD patients at a multi-site pulmonary practice was conducted. Patients who were enrolled in a continuous respiratory monitoring service for at least one year and were seen by a provider within seven days of an escalation by the service (N=168) were included. To evaluate the potential impact of these escalations on provider and patient burden, medical charts from outpatient visits were manually reviewed and grouped into six categories based on the clinical action(s) taken by the provider. Results: A total of 245 outpatient visits occurred from 168 patients within seven days of escalation. Of the 245 visits, 206 (84.1%) resulted in clinical intervention and 163 (66.5%) resulted in treatment consistent with acute exacerbations of COPD (AECOPDs). 1.6% of the outpatient visits resulted in referral to the emergency room. Conclusion: Provider encounters occurring following the escalation of a patient from a continuous respiratory monitoring service consistently resulted in that provider administering a treatment to the escalated patient.

Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors.

The integration of bio-based materials into triboelectric nanogenerators (TENGs) for energy harvesting from human body motions has sparked considerable research attention. Here, a silanated cellulose nanofibril (SCNF) aerogel is reported for structurally reliable TENGs and reversely compressible Taekwondo scoring sensors under repeated impacts. The preparation of the aerogel involves silanizing cellulose nanofibers (CNFs) with vinyltrimethoxysilane (VTMS), following by freeze-drying and post-heating treatment. The SCNF aerogel with crosslinked physico-chemical bonding and highly porous network is found to exhibit superior mechanical strength and reversible compressibility as well as enhanced water repellency and electron-donating ability. The TENG having a tribo-positive SCNF layer exhibits exceptional triboelectric performances, generating a voltage of 270 V, current of 11 µA, and power density of 401.1 mW m-2 under an applied force of 8 N at a frequency of 5 Hz. With its inherent merits in material composition, structural configuration, and device sensitivity, the SCNF TENG demonstrates the capability to seamlessly integrate into a Taekwondo protection gear, serving as an efficient self-powered sensor for monitoring hitting scores. This study highlights the significant potential of a facilely fabricated SCNF aerogel for the development of high-performance, bio-friendly, and cost-effective Bio-TENGs, enabling their application as self-powered wearable devices and sports engineering sensors.

PEDOT:PSS-Based Wearable Flexible Temperature Sensor and Integrated Sensing Matrix for Human Body Monitoring.

Flexible temperature sensors have been widely used in electronic skins and health monitoring. Body temperature as one of the key physiological signals is crucial for detecting human body's abnormalities, which necessitates high sensitivity, quick responsiveness, and stable monitoring. In this paper, we reported a resistive temperature sensor designed as an ultrathin laminated structure with a serpentine pattern and a bioinspired adhesive layer, which was fabricated with a composite of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)/single-wall carbon nanotubes/reduced graphene oxide (PEDOT:PSS/SWCNTs/rGO) and polydimethylsiloxane (PDMS). The temperature sensor exhibited a high temperature sensitivity of 0.63% °C-1, coupled with outstanding linearity of 0.98 within 25-45 °C. Furthermore, it showed fast response and recovery speeds of 4.8 and 5.8 s, respectively, between 25 and 36 °C. It also demonstrated exceptional stability when subjected to stress and bending disturbances with the maximum bending interference deviation of 0.03%. Additionally, it displayed good cyclic stability over a broad temperature range from 25 to 85 °C, and the standard deviation at 25 °C is 0.14%. A series of experiments including blowing detection, respiratory monitoring with or without a mask, and during rest or sleep were conducted to show the potential of the flexible temperature sensors in human body monitoring. Furthermore, a 4 × 4 flexible temperature sensor matrix was integrated to detect and map objects such as wrenches and blood vessels through human hand skin. The results were consistent with those of infrared measurements. The flexible temperature sensor is capable of real-time temperature monitoring and has the potential in tracking human respiration, assessing sleep quality, and mapping the temperature of various objects.

Role of Piezoelectricity in Disease Diagnosis and Treatment: A Review.

Because of their unique electromechanical coupling response, piezoelectric smart biomaterials demonstrated distinctive capability toward effective, efficient, and quick diagnosis and treatment of a wide range of diseases. Such materials have potentiality to be utilized as wireless therapeutic methods with ultrasonic stimulation, which can be used as self-powered biomedical devices. An emerging advancement in the realm of personalized healthcare involves the utilization of piezoelectric biosensors for a range of therapeutic diagnosis such as diverse physiological signals in the human body, viruses, pathogens, and diseases like neurodegenerative ones, cancer, etc. The combination of piezoelectric nanoparticles with ultrasound has been established as a promising approach in sonodynamic therapy and piezocatalytic therapeutics and provides appealing alternatives for noninvasive treatments for cancer, chronic wounds, neurological diseases, etc. Innovations in implantable medical devices (IMDs), such as implantable piezoelectric energy generator (iPEG), offer significant advantages in improving physiological functioning and ability to power a cardiac pacemaker and restore the heart function. This comprehensive review critically evaluates the role of piezoelectricity in disease diagnosis and treatment, highlighting the implication of piezoelectric smart biomaterials for biomedical devices. It also discusses the potential of piezoelectric materials in healthcare monitoring, tissue engineering, and other medical applications while emphasizing future trends and challenges in the field.

Evaluation of the electrochemical response of aromatic peptides for biodetection of dopamine.

Biologically inspired aromatic peptide-based materials are gaining increasing interest as novel charge transport materials for bioelectronics due to their remarkable electrical response and inherent biocompatibility. In this work, the electrochemical response of ten aromatic amino acids and eleven aromatic peptides has been evaluated to assess the potential of incorporating peptides into electrochemical sensors not as biorecognition elements but as biocompatible electronic materials. While the electrochemical response of amino acids is null in all cases, the hexapeptide of phenylalanine (Phe) capped with eight polyethylene glycol units at the N-terminus and, especially, the cyclic dipeptide formed by two dehydro-phenylalanine residues (cyclo(ΔPhe2)), which organize in fibrillary self-assembled structures of nano- and submicrometric size, respectively, are the most electroactive peptides. Electrodes to electrochemically detect the oxidation of dopamine have been prepared using a plasma-activated polyethylene terephthalate glycol substrate covered with a poly(3,4-ethylenedioxythiophene) layer and a peptide coating deposited at the surface. The highest analytical sensitivity and the lowest limits of detection and quantifications have been obtained for the electrode coated with cyclo(ΔPhe2), which shows much better results than that without peptide. These results, on the one hand, confirm the significant role of electron transport through π-stacking interactions in the electrochemical response of peptides and, on the other hand, demonstrate that peptides can be directly used as electronic materials rather than as simple recognition elements in electrochemical biosensors.

Integrating different detection techniques and data analysis methods for comprehensive food authenticity verification.

Traditional food testing methods, primarily confined to laboratory settings, are increasingly inadequate to detect covert food adulteration techniques. Hence, a crucial review of recent technological strides to combat food fraud is essential. This comprehensive analysis explores state-of-the-art technologies in food analysis, accentuating the pivotal role of sophisticated data processing methods and the amalgamation of diverse technologies in enhancing food authenticity testing. The paper assesses the merits and drawbacks of distinct data processing techniques and explores their potential synergies. The future of food authentication hinges on the integration of portable smart detection devices with mobile applications for real-time food analysis, including miniaturized spectrometers and portable sensors. This integration, coupled with advanced machine learning and deep learning for robust model construction, promises to achieve real-time, on-site food detection. Moreover, effective data processing, encompassing preprocessing, chemometrics, and regression analysis, remains indispensable for precise food authentication.

Cation-π Interactions Based Conductive Hydrogels with Slide-Ring Structure Toward Super Long-Time in-air/Underwater Linear Sensing and Communication.

Conductive hydrogels (CHs) are attracted more attention in the flexible wearable sensors field, however, how to stably apply CHs underwater is still a big challenge. In order to achieve the usage of CHs in aquatic environments, the integrated properties such as water retention ability, resistance to swelling, toughness, adhesiveness, linear GF sensing, and long-term usage are necessary to consider, but rarely reported in the previous reports. This paper proposes CHs prepared using cationic and aromatic monomers along with polyrotaxanes-based crosslinkers. Due to the intermolecular cation-π interactions and topological slide-ring-based polyrotaxanes, the CHs exhibit good mechanical performance, adhesive nature, and anti-swelling properties. The presence of slide-ring-based topological architecture effectively mitigates stress concentration. Additionally, the encapsulation of PA allows CHs to maintain functionality even after 240 days of direct placement at room temperature. Notably, the designed CHs exhibit linear sensitivity in detecting land/underwater human motions, and serve as Morse code signal transmitters for information transmission. Thus, the designed CHs may have broad applications in the underwater wearable sensors field.

Ultrasensitive and Adjustable Nanothermometers Based on Er3+-Sensitized Core@Shell Nanoparticles for Use in the First Biological Window.

In recent years, intensive research has focused on lanthanide-doped nanoparticles (NPs) used as noncontact temperature sensors, particularly in nanomedicine. These NPs must be capable of excitation and emission within biological windows, where biological materials usually show better transparency for radiation. In this article, we propose that NPs sensitized with Er3+ ions can be applied as temperature sensors in biological materials. We synthesized the NPs through a reaction in high-boiling solvents and confirmed their crystal structure and the formation of core@shell NPs by using X-ray diffraction, high-resolution transmission electron microscopy, and element distribution mapping within the NPs. NaErF4@NaYF4, NaYF4:12.5% Er3+, 2.5% Tm3+@NaYF4, NaYF4:7.5% Er3+@NaYF4, and NaYF4:12.5% Er3+, 2.5% Ho3+@NaYF4 exhibited intense upconversion (UC) emission under 1532 nm laser excitation detectable also in the whole human blood. We propose that this UC results from energy transfer between Er3+ ions and from Er3+ to Tm3+ or Ho3+ codopants. To determine the mechanism of UC, we measured the dependence of the emission band intensities on the laser power densities. Importantly, we also analyzed the temperature-dependent emission of the NPs within the 295-360 K range. Based on the collected emission spectra, we calculated the luminescence intensity ratios (LIRs) of the emission bands to assess their potential for optical temperature sensing. The temperature-sensing properties varied with the concentration of Er3+ ions and the presence of additional Tm3+ or Ho3+ codopants. Depending on the NP composition and the emission bands used for luminescence ratio calculations, the maximum relative temperature sensitivity ranged from 4.55%·K-1 to 1.12%·K-1, with temperature resolution between 0.05 and 2.53 K at room temperature. Finally, as proof of using NPs as temperature sensors in biomedicine, we successfully measured the temperature-dependent emission of NaYF4:7.5% Er3+@NaYF4 NPs dispersed in whole blood under 1532 nm excitation. We demonstrated that the ratio of Er3+ ion emission bands changes with temperature, indicating that these NPs have potential applications in temperature sensing within biological environments. We also confirmed the properties of NPs as temperature sensors by measuring the temperature reading uncertainty and the repeatability of the LIR readings during heating-cooling cycles, thereby confirming the excellent properties of the studied systems as temperature sensors.

Fully Integrated Biosensing System for Dynamic Monitoring of Sweat Glucose and Real-Time pH Adjustment Based on 3D Graphene MXene Aerogel.

The development of noninvasive glucose sensors capable of continuous monitoring without restricting user mobility is crucial, particularly for managing diabetes, which demands consistent and long-term observation. Traditional sensors often face challenges with accuracy and stability that curtail their practical applications. To address these issues, we have innovatively applied a three-dimensional porous aerogel composed of Ti3C2Tx MXene and reduced graphene oxide (MX-rGO) in electrochemical sensing. It significantly reduces the electron-transfer distance between the enzyme's redox center and the electrode surface while firmly anchoring the enzyme layer to effectively prevent any leakage. Another pivotal advancement in our study is the integration of the sensor with a real-time adaptive calibration mechanism tailored specifically for analyzing sweat glucose. This sensor not only measures glucose levels but also dynamically monitors and adjusts to pH fluctuations in sweat. Such capabilities ensure the precise delivery of physiological data during physical activities, providing strong support for personalized health management.

3D Printed Magnetoelectric Composites for Personalized Wearable Multifunctional Sensors.

Traditional fabrication methods for creating flexible magnetoelectric sensors are often laborious and challenging when it comes to personalization. This article employs fused deposition modeling 3D printing technology to produce flexible multifunctional sensors. (0-3) type composite filaments were prepared using polyvinylidene fluoride and cobalt ferrite (CoFe2O4, abbreviated as CFO). These filaments can be printed into various shapes, exhibiting good mechanical and electrical properties. Crucial parameters, such as different component ratios and CFO particle sizes, were analyzed. This study can serve as a valuable reference for the future development of personalized wearable sensors.

Detection of pathogenic gram-negative bacteria using an antimicrobial peptides-modified bipolar electrode-electrochemiluminescence platform.

Real-time, label-free detection of gram-negative bacteria with high selectivity and sensitivity is demonstrated using a bipolar electrode-electrochemiluminescence (BPE-ECL) platform. This platform utilizes anode luminescence and cathode modification of antimicrobial peptides (AMPs) to effectively capture bacteria. Magainin I, basic AMP from Xenopus skin, boasting an α-helix structure, exhibits a preferential affinity for the surface of gram-negative pathogens. The covalent attachment of the peptide's C-terminal carboxylic acid to the free amines of a previously thiolated linker ensures its secure immobilization onto the surface of the interdigitated gold-plated cathode of BPE. The AMP-modified BPE sensor, when exposed to varying concentrations of gram-negative bacteria, produces reproducible ECL intensities, allowing for the detection of peptide-bacteria interactions within the range 1 to 104 CFU mL-1. Furthermore, this AMP-modified BPE sensor demonstrates a selective capacity to detect Escherichia coli O157:H7 amidst other gram-negative strains, even at a concentration of 1-CFU mL-1. This study underscores the high selectivity of Magainin I in bacterial detection, and the AMP-modified BPE-ECL system holds significant promise for rapid detection of gram-negative bacteria in various applications. The AMP-modified BPE sensor generated reproducible ECL intensity that detected peptide-bacteria interactions in the range 1 to 104 CFU mL-1. The AMP-modified BPE sensor also selectively detected E. coli O157:H7 from other gram-negative strains at a concentration of 1-CFU mL-1. In this paper, AMP demonstrated high selectivity in bacterial detection. The AMP-modified BPE-ECL system prepared has a great potential for application in the field of rapid detection of gram-negative bacteria.

Strategies to control humidity sensitivity of azobenzene isomerisation kinetics in polymer thin films.

Azobenzenes are versatile photoswitches that garner interest in applications ranging from photobiology to energy storage. Despite their great potential, transforming azobenzene-based discoveries and proof-of-concept demonstrations from the lab to the market is highly challenging. Herein we give an overview of a journey that started from a discovery of hydroxyazobenzene's humidity sensitive isomerisation kinetics, developed into commercialization efforts of azobenzene-containing thin film sensors for optical monitoring of the relative humidity of air, and arrives to the present work aiming for better design of such sensors by understanding the different factors affecting the humidity sensitivity. Our concept is based on thermal isomerisation kinetics of tautomerizable azobenzenes in polymer matrices which, using pre-defined calibration curves, can be converted to relative humidity at known temperature. We present a small library of tautomerizable azobenzenes exhibiting humidity sensitive isomerisation kinetics in hygroscopic polymer films. We also investigate how water absorption properties of the polymer used, and the isomerisation kinetics are linked and how the azobenzene content in the thin film affects both properties. Based on our findings we propose simple strategies for further development of azobenzene-based optical humidity sensors.

Engineering Fano Resonances in Plasmonic Metasurfaces for Colorimetric Sensing and Structural Colors.

In this paper, we present the design and fabrication of a plasmonic metasurface based on titanium dioxide (TiO2) nanowire arrays integrated with plasmonic layers. The structure is engineered to produce Fano resonances within the visible spectrum, resulting from the coupling of localized surface plasmon resonances (LSPR), lattice modes, and nanowire's optical modes. Experimentally, we show that by tuning the geometrical features of the metasurface, such as the length, diameter, and lattice spacing of the nanowires, a high-quality factor single peak can be achieved in the reflection spectra, resulting in vivid structural colors in bright field. To our knowledge, this is the first demonstration of such vivid colors with nanowire arrays in bright field reflections. When characterized by refractive index fluids around the refractive index of water, the plasmonic metasurface also showed great potential for biochemical colorimetric sensing. The best design demonstrated a bulk sensitivity of 183 nm/RIU with high Q resonance features and linear changes in color values using image processing. .

Recent trends in edible algae functional proteins: Production, bio-functional properties, and sustainable food packaging applications.

In recent years, there has been a notable surge in the development and adoption of edible algae protein-based sustainable food packaging, which presents a promising alternative to traditional materials due to its biodegradability, renewability, and minimal environmental impact. Hence, this review aims to emphasize the sources, cultivation, and downstream potential of algal protein and protein complexes. Moreover, it comprehensively examines the advancements in utilizing protein complexes for smart and active packaging applications, while also addressing the challenges that must be overcome for the widespread commercial adoption of algal proteins to meet industry 4.0. The review revealed that the diversity of algae species and their sustainable cultivation methods offers a promising alternative to traditional protein sources. Being vegan source with higher photosynthetic conversion efficiency and reduced growth cycle has permitted the proposition of algae as proteins of the future. The unique combination of techno-functional combined with bio-functional properties such as antioxidant, anti-inflammatory and antimicrobial response have captured the sustainable groups to invest considerable research and promote the innovations in algal proteins. Food packaging research has increasingly benefited by the excellent gas barrier property and superior mechanical strength of algal proteins either stand alone or in synergy with other biodegradable polymers. Advanced packaging functionality such as freshness monitoring and active preservation techniques has been explored and needs considerable characterization for commercial advancement. Overall, while algal proteins show promising downstream potential in various industries aligned with Industry 4.0 principles, their broader adoption hinges on overcoming these barriers through continued innovation and strategic development.