Impact of signal-to-noise ratio and contrast definition on the sensitivity assessment and benchmarking of fluorescence molecular imaging systems.

Significance: Standardization of fluorescence molecular imaging (FMI) is critical for ensuring quality control in guiding surgical procedures. To accurately evaluate system performance, two metrics, the signal-to-noise ratio (SNR) and contrast, are widely employed. However, there is currently no consensus on how these metrics can be computed. Aim: We aim to examine the impact of SNR and contrast definitions on the performance assessment of FMI systems. Approach: We quantified the SNR and contrast of six near-infrared FMI systems by imaging a multi-parametric phantom. Based on approaches commonly used in the literature, we quantified seven SNRs and four contrast values considering different background regions and/or formulas. Then, we calculated benchmarking (BM) scores and respective rank values for each system. Results: We show that the performance assessment of an FMI system changes depending on the background locations and the applied quantification method. For a single system, the different metrics can vary up to ∼ 35 dB (SNR), ∼ 8.65 a . u . (contrast), and ∼ 0.67 a . u . (BM score). Conclusions: The definition of precise guidelines for FMI performance assessment is imperative to ensure successful clinical translation of the technology. Such guidelines can also enable quality control for the already clinically approved indocyanine green-based fluorescence image-guided surgery.

Radiofrequency-transparent local B0 shimming coils using float traps.

PURPOSE: Static field (B0) inhomogeneities present a major challenge in high-field MRI. Multicoil shimming using independent, local, direct-current (DC) shim coils has emerged as a powerful and flexible technique to address this issue. However, many-turn DC coils can lead to significant mutual coupling with radiofrequency (RF) coils, causing transmit field (B1 +) distortions and signal-to-noise ratio degradation. METHODS: We introduce an innovative RF-transparent DC coil that performs B0 shimming while minimizing RF performance impact. The design incorporates float traps to maintain high RF impedance, allowing flexible placement relative to the RF coil without compromising signal-to-noise ratio or affecting B1 +. We fabricated square-shaped DC coils with float traps for 3T MRI and compared them with conventional DC coils. To demonstrate high ΔB0/Amp efficiency, we conducted a B0 shimming experiment around a metal hip implant. RESULTS: Bench tests and MRI experimental results demonstrated that the RF-transparent DC coil effectively minimized RF interference, preserved signal-to-noise ratio, and maintained B1 +, even when placed near the RF receive coil. Additionally, the DC coil significantly improved B0 homogeneity near metal implants and substantially reduced image distortion. CONCLUSION: The RF-transparent DC coil offers a flexible, effective solution for managing B0 inhomogeneities, paving the way for integrating multiturn DC coils in clinical MRI settings without extensive hardware modifications.

MRI at low field: A review of software solutions for improving SNR.

Low magnetic field magnetic resonance imaging (MRI) ( B 0 $$ {B}_0 $$  < 1 T) is regaining interest in the magnetic resonance (MR) community as a complementary, more flexible, and cost-effective approach to MRI diagnosis. Yet, the impaired signal-to-noise ratio (SNR) per square root of time, or SNR efficiency, leading in turn to prolonged acquisition times, still challenges its relevance at the clinical level. To address this, researchers investigate various hardware and software solutions to improve SNR efficiency at low field, including the leveraging of latest advances in computing hardware. However, there may not be a single recipe for improving SNR at low field, and it is key to embrace the challenges and limitations of each proposed solution. In other words, suitable solutions depend on the final objective or application envisioned for a low-field scanner and, more importantly, on the characteristics of a specific low B 0 $$ {B}_0 $$ field. In this review, we aim to provide an overview on software solutions to improve SNR efficiency at low field. First, we cover techniques for efficient k-space sampling and reconstruction. Then, we present post-acquisition techniques that enhance MR images such as denoising and super-resolution. In addition, we summarize recently introduced electromagnetic interference cancellation approaches showing great promises when operating in shielding-free environments. Finally, we discuss the advantages and limitations of these approaches that could provide directions for future applications.

Towards Advancing Real-Time Railroad Inspection Using a Directional Eddy Current Probe.

In the field of railroad safety, the effective detection of surface cracks is critical, necessitating reliable, high-speed, non-destructive testing (NDT) methods. This study introduces a hybrid Eddy Current Testing (ECT) probe, specifically engineered for railroad inspection, to address the common issue of "lift-off noise" due to varying distances between the probe and the test material. Unlike traditional ECT methods, this probe integrates transmit and differential receiver (Tx-dRx) coils, aiming to enhance detection sensitivity and minimise the lift-off impact. The study optimises ECT probes employing different transmitter coils, emphasising three main objectives: (a) quantitatively evaluating each probe using signal-to-noise ratio (SNR) and outlining a real-time data-processing algorithm based on SNR methodology; (b) exploring the frequency range proximal to the electrical resonance of the receiver coil; and (c) examining sensitivity variations across varying lift-off distances. The experimental outcomes indicate that the newly designed probe with a figure-8 shaped transmitter coil significantly improves sensitivity in detecting surface cracks on railroads. It achieves an impressive SNR exceeding 100 for defects with minimal dimensions of 1 mm in width and depth. The simulation results closely align with experimental findings, validating the investigation of the optimal operational frequency and lift-off distance for selected probe performance, which are determined to be 0.3 MHz and 1 mm, respectively. The realisation of this project would lead to notable advancements in enhancing railroad safety by improving the efficiency of crack detection.

Expanding generalized contrast-to-noise ratio into a clinically relevant measure of lesion detectability by considering size and spatial resolution.

Purpose: Early image quality metrics were often designed with clinicians in mind, and ideal metrics would correlate with the subjective opinion of practitioners. Over time, adaptive beamformers and other post-processing methods have become more common, and these newer methods often violate assumptions of earlier image quality metrics, invalidating the meaning of those metrics. The result is that beamformers may "manipulate" metrics without producing more clinical information. Approach: In this work, Smith et al.'s signal-to-noise ratio (SNR) metric for lesion detectability is considered, and a more robust version, here called generalized SNR (gSNR), is proposed that uses generalized contrast-to-noise ratio (gCNR) as a core. It is analytically shown that for Rayleigh distributed data, gCNR is a function of Smith et al.'s C ψ (and therefore can be used as a substitution). More robust methods for estimating the resolution cell size are considered. Simulated lesions are included to verify the equations and demonstrate behavior, and it is shown to apply equally well to in vivo data. Results: gSNR is shown to be equivalent to SNR for delay-and-sum (DAS) beamformed data, as intended. However, it is shown to be more robust against transformations and report lesion detectability more accurately for non-Rayleigh distributed data. In the simulation included, the SNR of DAS was 4.4 ± 0.8 , and minimum variance (MV) was 6.4 ± 1.9 , but the gSNR of DAS was 4.5 ± 0.9 , and MV was 3.0 ± 0.9 , which agrees with the subjective assessment of the image. Likewise, the DAS 2 transformation (which is clinically identical to DAS) had an incorrect SNR of 9.4 ± 1.0 and a correct gSNR of 4.4 ± 0.9 . Similar results are shown in vivo. Conclusions: Using gCNR as a component to estimate gSNR creates a robust measure of lesion detectability. Like SNR, gSNR can be compared with the Rose criterion and may better correlate with clinical assessments of image quality for modern beamformers.

Restoration of X-ray phase-contrast imaging based on generative adversarial networks.

For light-element materials, X-ray phase contrast imaging provides better contrast compared to absorption imaging. While the Fourier transform method has a shorter imaging time, it typically results in lower image quality; in contrast, the phase-shifting method offers higher image quality but is more time-consuming and involves a higher radiation dose. To rapidly reconstruct low-dose X-ray phase contrast images, this study developed a model based on Generative Adversarial Networks (GAN), incorporating custom layers and self-attention mechanisms to recover high-quality phase contrast images. We generated a simulated dataset using Kaggle's X-ray data to train the GAN, and in simulated experiments, we achieved significant improvements in Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index (SSIM). To further validate our method, we applied it to fringe images acquired from three phase contrast systems: a single-grating phase contrast system, a Talbot-Lau system, and a cascaded grating system. The current results demonstrate that our method successfully restored high-quality phase contrast images from fringe images collected in experimental settings, though it should be noted that these results were achieved using relatively simple sample configurations.

Digital screener of socio-motor agency balancing motor autonomy and motor control.

Dyadic social interactions evoke complex dynamics between two agents that, while exchanging unequal levels of body autonomy and motor control, may find a fine balance to synergize, take turns, and gradually build social rapport. To study the evolution of such complex interactions, we currently rely exclusively on subjective pencil and paper means. Here, we complement this approach with objective biometrics of socio-motor behaviors conducive to socio-motor agency. Using a common clinical test as the backdrop of our study to probe social interactions between a child and a clinician, we demonstrate new ways to streamline the detection of social readiness potential in both typically developing and autistic children by uncovering a handful of tasks that enable quantification of levels of motor autonomy and levels of motor control. Using these biometrics of autonomy and control, we further highlight differences between males and females and uncover a new data type amenable to generalizing our results to any social setting. The new methods convert continuous dyadic bodily biorhythmic activity into spike trains and demonstrate that in the context of dyadic behavioral analyses, they are well characterized by a continuous Gamma process that can classify individual levels of our thus defined socio-motor agency during a dyadic exchange. Finally, we apply signal detection processing tools in a machine learning approach to show the validity of the streamlined version of the digitized ADOS test. We offer a new framework that combines stochastic analyses, non-linear dynamics, and information theory to streamline and facilitate scaling the screening and tracking of social interactions with applications to autism.

Phase-contrast Magnetic Resonance Angiography of Foot at Ultra-high field 5T System: Visualization of Distal Small Vessels and Enhancement by Warm Water Immersion.

BACKGROUND: Ultra-high field strength MR system has been proved to offer improved visualization of the distal intracranial vessels and branches, but its effectiveness on peripheral vasculatures was not investigated. We aim to assess the visualization of lower-extremity vessels using three-dimensional phase contrast MR angiography (3D PC-MRA) at 5T field-strength through the feet with warm water immersion (WWI). METHODS: Participants were prospectively recruited and underwent 3T, 5T 3D PC-MRA on feet with and without WWI (water temperature between 40 to 45 ℃ for a duration of 10minutes). Patients with suspected lower-extremity vessel diseases underwent CTA for lesion identification. Signal-to-noise ratio (SNR), subjective scoring, quantitative vessel segmentation and flow velocity were performed to assess vessel visualization before and after WWI. Friedman's test was conducted to determine statistical significance. RESULTS: Out of thirty participants (mean age, 46.2±5.9; males, 20; lower-extremity vessel disease, 10), 900 vessel segments were available for evaluation. 5T images showed significantly higher scores of image quality and foot vessel visualization than 3T (all P <.05). WWI further improved the visualizing scores (percentage of score 3: 40.2% vs 66.2%, P =.008), SNR (44.27 vs 67.78, P <.001), total branch count (151.92 ± 29.17 vs 225.63 ± 16.76; P <.001), and the flow velocity (0.72 ± 0.03 vs 0.48 ± 0.11cm/s; P <.001). CONCLUSION: 3D PC-MRA at 5T effectively visualizes foot vessels in patients with lower-extremity disease. Furthermore, WWI can significantly enhance the depiction of distal and small vessels.

Parameter optimisation for image acquisition and stacking in carbon dioxide digital subtraction angiography.

The aim of this study was to optimise the vessel angle as well as the stack number from the profiles of carbon dioxide digital subtraction angiography (CO2-DSA) images of a water phantom containing an artificial vessel tilted at different angles which imitate arteries in the body. The artificial vessel was tilted at 0°, 15°, and 30° relative to the horizontal axis with its centre as the pivot point, and CO2-DSA images were acquired at each vessel tilt angle. The maximum opacity method was used to stack up to four images of the next frame one by one. The signal-to-noise ratio (SNR) was determined from the profile curves. The Wilcoxon rank sum test was used to evaluate whether the profile curve and SNR differed depending on the vessel tilt angle or stack number, and a p-value of less than 0.05 was considered statistically significant. Images acquired at 0° had a significantly lower SNR than images acquired at 15° (p = 0.10). When the vessel angle was 30°, the profile curves were significantly improved (p < 0.05) when two or more images were stacked over the original image. Images with a good SNR were acquired at the vessel tilt angle of 15°, and the shape of the profile curve was improved when two or more images were stacked on the original image. This study demonstrates that the quality of images acquired using CO2-DSA can be significantly improved through parameter optimisation for image acquisition and post-processing.

Exploring the impact and influence of melanin on frequency-domain near-infrared spectroscopy measurements.

Significance: Near-infrared spectroscopy (NIRS) is a non-invasive optical method that measures changes in hemoglobin concentration and oxygenation. The measured light intensity is susceptible to reduced signal quality due to the presence of melanin. Aim: We quantify the influence of melanin concentration on NIRS measurements taken with a frequency-domain near-infrared spectroscopy system using 690 and 830 nm. Approach: Using a forehead NIRS probe, we measured 35 healthy participants and investigated the correlation between melanin concentration indices, which were determined using a colorimeter, and several key metrics from the NIRS signal. These metrics include signal-to-noise ratio (SNR), two measurements of oxygen saturation (arterial oxygen saturation, SpO 2 , and tissue oxygen saturation, StO 2 ), and optical properties represented by the absorption coefficient ( µ a ) and the reduced scattering coefficient ( µ s ' ). Results: We found a significant negative correlation between the melanin index and the SNR estimated in oxy-hemoglobin signals ( r s = - 0.489 , p = 0.006 ) and SpO 2 levels ( r s = - 0.413 , p = 0.023 ). However, no significant changes were observed in the optical properties and StO 2 ( r s = - 0.146 , p = 0.44 ). Conclusions: We found that estimated SNR and SpO 2 values show a significant decline and dependence on the melanin index, whereas StO 2 and optical properties do not show any correlation with the melanin index.

Comparison of the Image Quality of Turbo Spin Echo and Echo-Planar Diffusion-Weighted Imaging of the Head and Neck Region.

BACKGROUND: Magnetic resonance imaging (MRI) of the head and neck region is notably challenging due to the complex anatomy and the critical need for high-resolution imaging to accurately diagnose various pathologies. The two prominent MRI techniques used in this context are turbo spin echo (TSE) and echo-planar diffusion-weighted imaging (EP-DWI). TSE is recognized for providing high-resolution anatomical images, whereas EP-DWI offers functional imaging that highlights the diffusion of water molecules, essential for detecting early pathological changes. This study aims to compare the image quality of TSE and EP-DWI in the head and neck region to assess their diagnostic efficacy and clinical utility. METHODS: This retrospective study was conducted at Saveetha Medical College and Hospital over six months. A total of 100 patients (50 males and 50 females, aged 18-65 years) with various head and neck pathologies were included. Patients underwent both TSE and EP-DWI sequences using a Philips MULTIVA 1.5 T scanner. Image quality was assessed based on signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), artifact presence, and lesion detection. Two experienced radiologists independently reviewed the images, with inter-observer agreement calculated using Cohen's kappa coefficient. RESULTS: The mean SNR for TSE was significantly higher than EP-DWI (45.2 vs. 28.7, p<0.01), indicating superior image clarity and detail in TSE images. TSE demonstrated a higher mean CNR compared to EP-DWI (25.4 vs. 15.8, p<0.01), suggesting better differentiation between different tissue types and pathologies. Artifacts were more frequent in EP-DWI images (45% vs. 15%), with motion artifacts being the most common. TSE detected more lesions (120 vs. 95), with more precise delineation of lesions. The inter-observer agreement was excellent for both TSE and EP-DWI, with kappa values of 0.85 and 0.80, respectively. CONCLUSION: TSE MRI provides superior image quality compared to EP-DWI for evaluating the head and neck region. The enhanced SNR and CNR in TSE images result in clearer and more detailed visualizations of anatomical structures and pathological changes, with fewer artifacts. While EP-DWI is valuable for functional imaging, its role should be complementary to TSE. The study suggests that TSE should be the preferred modality for detailed anatomical assessment in the head and neck region. Further studies with larger sample sizes and advanced imaging techniques may provide additional insights into optimizing MRI protocols for head and neck imaging.

An automatic method for accurate signal-to-noise ratio estimation and baseline correction of Raman spectra of environmental microplastics.

In this study, we introduced a k-iterative double sliding-window (DSW^k) method for the estimation of spectral noise, signal-to-noise ratio (SNR), and baseline correction. The performance was evaluated using simulated spectra and compared against other commonly employed methods. Convergent evaluation determined that a k value of 20 strikes an optimal balance between convergence and computational intensity. The DSW^k method demonstrated outstanding performance across different spectral types (flat baseline, baseline with elevation, baseline with fluctuation, baseline with elevation and fluctuation) coupled with SNR values from 10 to 1000, achieving results that ranged from 1.01 to 1.08 times of the reference value in estimating spectral noise. It also showed that the estimated SNR values are 0.89 to 0.93 times of the reference value, demonstrating a 74.5 % - 131.7 % improvement over the conventional method in spectra with elevated and/or fluctuating baselines. Additionally, the DSW^k method proved effective in correcting baselines and identifying polymers in environmental samples of polyethylene (PE), polypropylene (PP), and polystyrene (PS), despite the limitation of reducing the peak height in spectra with low SNR. This method offers the potential to enhance the automatic and accurate evaluation of spectral quality and could assist in the development of guidelines for more rapid parameter adjustments in Raman measurements.

Ultrasoft Long-Lasting Reusable Hydrogel-Based Sensor Patch for Biosignal Recording.

Here, we report an ultrasoft extra long-lasting, reusable hydrogel-based sensor that enables high-quality electrophysiological recording with low-motion artifacts. The developed sensor can be used and stored in an ambient environment for months before being reused. The developed sensor is made of a self-adhesive electrical-conductivity-enhanced ultrasoft hydrogel mounted in an Ecoflex-based frame. The hydrogel's conductivity was enhanced by incorporating polypyrrole (PPy), resulting in a conductivity of 0.25 S m-1. Young's modulus of the sensor is only 12.9 kPa, and it is stretchable up to 190%. The sensor was successfully used for electrocardiography (ECG) and electromyography (EMG). Our results indicate that using the developed hydrogel-based sensor, the signal-to-noise ratio of recorded electrophysiological signals was improved in comparison to that when medical-grade silver/silver chloride (Ag/AgCl) wet gel electrodes were used (33.55 dB in comparison to 22.16 dB). Due to the ultra-softness, high stretchability, and self-adhesion of the developed sensor, it can conform to the skin and, therefore, shows low susceptibility to motion. In addition, the sensor shows no sign of irritation or allergic reaction, which usually occurs after long-term wearing of medical-grade Ag/AgCl wet gel electrodes on the skin. Further, the sensor is fabricated using a low-cost and scalable fabrication process.

Multiplanar reconstructions of the thoracic spine in a photon counting dual-source CT scanner: comparison to EID-CT.

BACKGROUND: Photon-counting detector computed tomography (PCD-CT) is a groundbreaking technology with promising results for visualization of small bone structures. PURPOSE: To analyze the delineation of the thoracic spine in multiplanar reconstructions (MPR) on PCD-CT compared to energy-integrating detector (EID)-CT. MATERIAL AND METHODS: Two euthanized mice were examined using different scanners: (i) 20-slice EID-CT and (ii) dual-source PCD-CT at various CTDIVol values. Readers evaluated the thoracic spine and selected series with best visualization among signal-to-noise ratio (SNR)-matched pairs. RESULTS: SNR was significantly higher in PCD-CT reconstructions (Br68) and lower in Hr98 reconstructions compared to EID-CT. Bone detail visualization was superior in PCD-CT (especially in Hr98 reconstructions) compared to EID-CT. CONCLUSION: MPR on a PCD-CT had a higher SNR and better bone detail visualization even at lower radiation doses compared to EID-CT. PCD-CT with bone reconstructions showed the best delineation of small bone structures and might be considered in clinical routine.

Fat-signal suppression in breast diffusion-weighted imaging: the Good, the Bad, and the Ugly.

OBJECTIVES: Fat-signal suppression is essential for breast diffusion magnetic resonance imaging (or diffusion-weighted MRI, DWI) as the very low diffusion coefficient of fat tends to decrease absolute diffusion coefficient (ADC) values. Among several methods, the STIR (short-tau inversion recovery) method is a popular approach, but signal suppression/attenuation is not specific to fat contrary to other methods such as SPAIR (spectral adiabatic (or attenuated) inversion recovery). This article focuses on those two techniques to illustrate the importance of appropriate fat suppression in breast DWI, briefly presenting the pros and cons of both approaches. METHODS AND RESULTS: We show here through simulation and data acquired in a dedicated breast DWI phantom made of vials with water and various concentrations of polyvinylpyrrolidone (PVP) how ADC values obtained with STIR DWI may be biased toward tissue components with the longest T1 values: ADC values obtained with STIR fat suppression may be over/underestimated depending on the T1 and ADC profile within tissues. This bias is also illustrated in two clinical examples. CONCLUSION: Fat-specific methods should be preferred over STIR for fat-signal suppression in breast DWI, such as SPAIR which also provides a higher sensitivity than STIR for lesion detection. One should remain aware, however, that efficient fat-signal suppression with SPAIR requires good B0 shimming to avoid ADC underestimation from residual fat contamination. CLINICAL RELEVANCE STATEMENT: The spectral adiabatic (or attenuated) inversion recovery (SPAIR) method should be preferred over short-tau inversion recovery (STIR) for fat suppression in breast DWI. KEY POINTS: Fat-signal suppression is essential for breast DWI; the SPAIR method is recommended. Short-tau inversion recovery (STIR) is not specific to fat; as a result, SNR is decreased and ADC values may be over- or underestimated. The STIR fat-suppression method must not be used after the injection of gadolinium-based contrast agents.

Development of Digit in Noise Test in Hindi.

BACKGROUND: The digit in the noise test is a simple hearing screening tool that can identify hearing loss at the early stage. This screening tool takes less time than traditional pure-tone audiometry. There is a scarcity of hearing health professionals with few resources for carrying out hearing screening on a large scale in India. Hence, a hearing screening tool for the Hindi-speaking population is needed. AIM AND OBJECTIVE: The study aimed to develop and validate the Digit in Noise test in Hindi (DIN-H). METHODS: A native Hindi female speaker recorded single digits from 1 to 9 made into triplet combinations, which were binaurally presented to 20 normal hearing subjects having hearing thresholds less than 25 dBHL from 250 to 8000 Hz in the presence of broadband speech-shaped noise. The digit triplets were homogenized using speech intelligibility function for similar difficulty levels across stimuli. The homogenized stimuli were evaluated by obtaining the Speech Recognition Threshold (SRT) of 20 normal hearing subjects. RESULTS: The Mean SRT was - 10.4 and - 11.3 dB before and after homogenization. A strong positive correlation existed between test and retest SRTs (0.78). Mean SRT and slope obtained before and after optimization were comparable to other languages like Korean and English. This test can act as a reliable screening tool for assessing individuals. The test was administered to 106 normal hearing participants. The 95th percentile of the SRT value obtained was - 5.6 dB, which was kept as a cut-off score for the screening test. CONCLUSION: DIN-H can be used as a screening tool for assessing the integrity of the auditory system on a large scale in less time for the Hindi-speaking population.

Development of an Imaging Spectrometer with a High Signal-to-Noise Ratio Based on High Energy Transmission Efficiency for Soil Organic Matter Detection.

Hyperspectral detection of the change rate of organic matter content in agricultural remote sensing requires a high signal-to-noise ratio (SNR). However, due to the large number and efficiency limitation of the components, it is difficult to improve the SNR. This study uses high-efficiency convex grating with a diffraction efficiency exceeding 50% across the 360-850 nm range, a back-illuminated Complementary Metal Oxide Semiconductor (CMOS) detector with a 95% efficiency in peak wavelength, and silver-coated mirrors to develop an imaging spectrometer for detecting soil organic matter (SOM). The designed system meets the spectral resolution of 10 nm in the 360-850 nm range and achieves a swath of 100 km and a spatial resolution of 100 m at an orbital height of 648.2 km. This study also uses the basic structure of Offner with fewer components in the design and sets the mirrors of the Offner structure to have the same sphere, which can achieve the rapid adjustment of the co-standard. This study performs a theoretical analysis of the developed Offner imaging spectrometer based on the classical Rowland circular structure, with a 21.8 mm slit length; simulates its capacity for suppressing the +2nd-order diffraction stray light with the filter; and analyzes the imaging quality after meeting the tolerance requirements, which is combined with the surface shape characteristics of the high-efficiency grating. After this test, the grating has a diffraction efficiency above 50%, and the silver-coated mirrors have a reflection value above 95% on average. Finally, the laboratory tests show that the SNR over the waveband exceeds 300 and reaches 800 at 550 nm, which is higher than some current instruments in orbit for soil observation. The proposed imaging spectrometer has a spectral resolution of 10 nm, and its modulation transfer function (MTF) is greater than 0.23 at the Nyquist frequency, making it suitable for remote sensing observation of SOM change rate. The manufacture of such a high-efficiency broadband grating and the development of the proposed instrument with high energy transmission efficiency can provide a feasible technical solution for observing faint targets with a high SNR.

A cross-sectional study on the correlation of image quality, effective dose, and body composition with thyroid, chest, and abdominal computed tomography scans.

Background: The rapid increase in the use of radiodiagnostic examinations in China, especially computed tomography (CT) scans, has led to these examinations being the largest artificial source of per capita effective dose (ED). This study conducted a retrospective analysis of the correlation between image quality, ED, and body composition in 540 cases that underwent thyroid, chest, or abdominal CT scans. The aim of this analysis was to evaluate the correlation between the parameters of CT scans and body composition in common positions of CT examination (thyroid, chest, and abdomen) and ultimately inform potential measures for reducing radiation exposure. Methods: This study included 540 patients admitted to Fudan University Shanghai Cancer Center from January 2015 to December 2019 who underwent both thyroid or chest or abdominal CT scan and body composition examination. Average CT values and standard deviation (SD) values were collected for the homogeneous areas of the thyroid, chest, or abdomen, and the average CT values and SD values of adjacent subcutaneous fat tissue were measured in the same region of interest (ROI). All data were measured three times, and the average was taken to calculate the signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) for each area. The dose-length product (DLP) was recorded, and the ED was calculated with the following: formula ED = k × DLP. Dual-energy X-ray was used to determine body composition and obtain indicators such as percentage of spinal and thigh muscle. Pearson correlation coefficient was used to analyze the correlations between body composition indicators, height, weight, body mass index (BMI), and ED. Results: The correlation coefficients between the SNR of abdominal CT scan and weight, BMI, and body surface area (BSA) were -0.470 (P=0.001), -0.485 (P=0.001), and -0.437 (P=0.002), representing a moderate correlation strength with statistically significant differences. The correlation coefficients between the ED of chest CT scans and weight, BMI, spinal fat percentage, and BSA were 0.488 (P=0.001), 0.473 (P=0.002), 0.422 (P=0.001), and 0.461 (P=0.003), respectively, indicating a moderate correlation strength with statistical differences. There was a weak statistically significant correlation between the SNR, CNR, and ED of the other scans with each physical and body composition index (P=0.023). Conclusions: There were varying degrees of correlation between CT image quality and ED and physical and body composition indices, which may inform novel solutions for reducing radiation exposure.

SNR Enhancement for Comparator-Based Ultra-Low-Sampling Φ-OTDR System Using Compressed Sensing.

The large amount of sampled data in coherent phase-sensitive optical time-domain reflectometry (Φ-OTDR) brings heavy data transmission, processing, and storage burdens. By using the comparator combined with undersampling, we achieve simultaneous reduction of sampling rate and sampling resolution in hardware, thus greatly decreasing the sampled data volume. But this way will inevitably cause the deterioration of detection signal-to-noise ratio (SNR) due to the quantization noise's dramatic increase. To address this problem, denoising the demodulated phase signals using compressed sensing, which exploits the sparsity of spectrally sparse vibration, is proposed, thereby effectively enhancing the detection SNR. In experiments, the comparator with a sampling parameter of 62.5 MS/s and 1 bit successfully captures the 80 MHz beat signal, where the sampled data volume per second is only 7.45 MB. Then, when the piezoelectric transducer's driving voltage is 1 Vpp, 300 mVpp, and 100 mVpp respectively, the SNRs of the reconstructed 200 Hz sinusoidal signals are respectively enhanced by 23.7 dB, 26.1 dB, and 28.7 dB by using compressed sensing. Moreover, multi-frequency vibrations can also be accurately reconstructed with a high SNR. Therefore, the proposed technique can effectively enhance the system's performance while greatly reducing its hardware burden.

3D MR neurography with gadolinium contrast to improve the visualization of pelvic nerves and the branches.

Objective: To evaluate the effectiveness of 3D NerveVIEW sequence with gadolinium contrast on the visualization of pelvic nerves and their branches compared to that without contrast. Methods: Participants were scanned twice using 3D NerveVIEW sequence with and without gadolinium contrast to acquire pelvic nerve images. The signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and contrast ratio of the nerves were calculated and compared to determine the quality of images. To subjectively assess, using a 3-point scale, branch nerves critical to therapeutic decision-making, including the pelvic splanchnic nerve and pelvic plexus, the superior gluteal nerve, and the pudendal nerve. Results: In the 32 eligible participants after using contrast, the CNRs of the images of nerve-to-bone and nerve-to-vessel significantly increased (p < 0.05). The CR of the images with contrast of all nerve-to-surrounding tissues (i.e., bone, muscle, blood vessels, and fat) were also found significantly higher (p < 0.05). The assessment of observers also shows higher scores for images with contrast compared to images without contrast. Conclusion: The 3D NerveVIEW sequence combined with gadolinium contrast improved vascular suppression, increased the contrast between pelvic nerves and surrounding tissue, and enhanced the visualization of nerves and their branches. This study may be helpful for the technically challenging preoperative planning of pelvic diseases surgery.