RESUMO
The development of anodes with highly efficient electrochemical catalysis and good durability is crucial for solid oxide fuel cells (SOFCs). This paper reports a superior Ru-doped La0.4Sr0.4Ti0.85Ni0.15O3-δ (L0.4STN) anode material with excellent catalytic activity and good stability. The doping of Ru can inhibit the agglomeration of in situ-exsolved Ni nanoparticles on the surface and induce the formation of abundant multiple-twinned defects in the perovskite matrix, which significantly increase the concentration of oxygen vacancies. The reduced L0.4STRN (R-L0.4STRN) anode shows an area-specific resistance (ASR) of 0.067 Ω cm2 at 800 °C, which is only about one-third of that of stochiometric R-L0.6STN (0.212 Ω cm2). A single cell with the R-L0.4STRN anode shows excellent stability (â¼50 h at 650 °C) in both H2 and CH4. Furthermore, R-L0.4STRN exhibits outstanding resistance to carbon deposition, which can be attributed to the synergistic effect of highly dispersed Ni nanoparticles and active twinned defects induced by Ru doping.
RESUMO
Ag-decorated TiO2 nanostructured materials are promising photocatalysts. We used non-standard cryo-lyophilization and ArF laser ablation methods to produce TiO2 nanosheets and TiO2 nanostructured thin films decorated with Ag nanoparticles. Both methods have a common advantage in that they provide a single multiply twinned Ag(0) characterized by {111} twin boundaries. Advanced microscopy techniques and electron diffraction patterns revealed the formation of multiply twinned Ag(0) structures at elevated temperatures (500 °C and 800 °C). The photocatalytic activity was demonstrated by the efficient degradation of 4-chlorophenol and Total Organic Carbon removal using Ag-TiO2 nanosheets, because the multiply twinned Ag(0) served as an immobilized photocatalytically active center. Ag-TiO2 nanostructured thin films decorated with multiply twinned Ag(0) achieved improved photoelectrochemical water splitting due to the additional induction of a plasmonic effect. The photocatalytic properties of TiO2 nanosheets and TiO2 nanostructured thin films were correlated with the presence of defect-twinned structures formed from Ag(0) nanoparticles with a narrow size distribution, tuned to between 10 and 20 nm. This work opens up new possibilities for understanding the defects generated in Ag-TiO2 nanostructured materials and paves the way for connecting their morphology with their photocatalytic activity.
RESUMO
The broad and large-scale application of solid oxide fuel cells (SOFCs) technology hinges significantly on the development of highly active and robust electrode materials. Here, Ni-free anode materials decorated with metal nanoparticles are synthesized by in situ reduction of Fe-doping Sr2CoMo1-xFexO6-δ (x = 0, 0.05, 0.1) double perovskite oxides under a reducing condition at 850 °C. The exsolved nanoparticles from the Sr2CoMo0.95Fe0.05O6-δ (SCMF0.05) lattice are Co-Fe alloys with rich multiple-twinned defects, significantly enhancing the catalytic activity of the SCMF0.05 anode toward the oxidation of H2 and CH4. The electrolyte-supported single cell with the reuduced SCMF0.05 anode reaches peak power densities as high as 992.9 and 652.3 mW cm-2 in H2 and CH4 at 850 °C, respectively, while maintaining superior stability (â¼50 h at 700 °C). The reduced SCMF0.05 anode also demonstrates excellent coking resistance in CH4, which can be attributed to the increased oxygen vacancies due to Fe doping and the effective catalysis of multiple-twinned Co-Fe alloy nanoparticles for reforming of CH4 to H2 and CO. The findings in this work may provide a new insight for the design of highly active and durable anode catalysts in SOFCs.
