Advanced PEI/PAN Membrane to Suppress Zinc Dendrite Growth in Zinc Metal Batteries.

Aqueous zinc-ion batteries (AZIBs) are a potential new technology in energy storage due to their high energy density, affordability, and environmental friendliness. Unchecked zinc dendrite formation during cycling still hinders the development of AZIBs, resulting in an unstable interface, a short cycling life, a considerable capacity decline, and security issues. Herein, we demonstrate a novel nanofiber membrane based on a polyethylenimine-polyacrylonitrile (PEI-PAN) polymer produced by electrospinning with entangled nanofibers for AZIBs applications. The as-fabricated PEI/PAN membrane has a porous structure that is homogeneous, tortuous, and linked, with high porosity and superior electrolyte wettability. The PEI/PAN membrane has good thermal stability at 200 °C and high ionic conductivity of up to 5.3 x 10-4 S cm-1. This membrane provides Zn/Zn symmetric cells with an ultralong cycle life of over 250 hours at 3 mA cm-2. Additionally, MnO2/Zn cells outperforms commercial filter paper in terms of cycle stability and rate performance. This work demonstrates a simple technique for fabricating advanced nanofiber membranes for AZIBs to modify Zn2+ deposition behavior and improve Zn dendrite resistance.

Bilayered Vanadium Oxides Pillared by Strontium Ions and Water Molecules as Stable Cathodes for Rechargeable Zn-Metal Batteries.

Vanadium-based compounds have attracted significant attention as cathodes for aqueous zinc metal batteries (AZMBs) because of their remarkable advantages in specific capacities. However, their low diffusion coefficient for zinc ions and structural collapse problems lead to poor rate capability and cycle stability. In this work, bilayered Sr0.25V2O5·0.8H2O (SVOH) nanowires are first reported as a highly stable cathode material for rechargeable AZMBs. The synergistic pillaring effect of strontium ions and water molecules improves the structural stability and ion transport dynamics of vanadium-based compounds. Consequently, the SVOH cathode exhibits a high capacity of 325.6 mAh g-1 at 50 mA g-1, with a capacity retention rate of 72.6% relative to the maximum specific capacity at 3.0 A g-1 after 3000 cycles. Significantly, a unique single-nanowire device is utilized to demonstrate the excellent conductivity of the SVOH cathode directly. Additionally, the energy storage mechanism of zinc insertion and extraction is investigated using a variety of advanced in situ and ex situ analysis techniques. This method of ion intercalation to improve electrochemical performance will further promote the development of AZMBs in large-scale applications.

Simultaneous Inhibition of Vanadium Dissolution and Zinc Dendrites by Mineral-Derived Solid-State Electrolyte for High-Performance Zinc Metal Batteries.

Designing solid electrolyte is deemed as an effective approach to suppress the side reaction of zinc anode and active material dissolution of cathodes in liquid electrolytes for zinc metal batteries (ZMBs). Herein, kaolin is comprehensively investigated as raw material to prepare solid electrolyte (KL-Zn) for ZMBs. As demonstrated, KL-Zn electrolyte is an excellent electronic insulator and zinc ionic conductor, which presents wide voltage window of 2.73 V, high ionic conductivity of 5.08 mS cm-1, and high Zn2+ transference number of 0.79. For the Zn//Zn cells, superior cyclic stability lasting for 2200 h can be achieved at 0.2 mA cm-2. For the Zn//NH4V4O10 batteries, stable capacity of 245.8 mAh g-1 can be maintained at 0.2 A g-1 after 200 cycles along with high retention ratio of 81%, manifesting KL-Zn electrolyte contributes to stabilize the crystal structure of NH4V4O10 cathode. These satisfying performances can be attributed to the enlarged interlayer spacing, zinc (de)solvation-free mechanism and fast diffusion kinetics of KL-Zn electrolyte, availably guaranteeing uniform zinc deposition for zinc anode and reversible zinc (de)intercalation for NH4V4O10 cathode. Additionally, this work also verifies the application possibility of KL-Zn electrolyte for Zn//MnO2 batteries and Zn//I2 batteries, suggesting the universality of mineral-based solid electrolyte.

Revitalizing Dead Zinc with Ferrocene/Ferrocenium Redox Chemistry for Deep-Cycle Zinc Metal Batteries.

Aqueous zinc (Zn) batteries are highly desirable for sustainable and large-scale electrochemical energy storage technologies. However, the ceaseless dendrite growth and the derived dead Zn are principally responsible for the capacity decay and insufficient lifespan. Here, we propose a dissolved oxygen-initiated revitalization strategy to reactivate dead Zn via ferrocene redox chemistry, which can be realized by incorporating a trace amount of poly(ethylene glycol) as a solubilizer to improve the solubility of water-insoluble ferrocene derivatives. Ferrocene scaffold can be spontaneously oxidized to ferricenium cations by dissolved oxygen, which eradicates the dissolved oxygen-involved Zn corrosion and insulating by-product generation. Subsequently, the generated ferricenium cations as the scavenger can rejuvenate electrically isolated dead Zn into electroactive Zn2+ ions to compensate the zinc loss. Through this design, the symmetric cell exhibited improved cycle life of 3700 h at 10 mA cm-2, and 220 h under a high depth of discharge of 80%. Importantly, the Zn||NaV3O8·1.5H2O full cells demonstrated the impressive cycling stability over 1000 cycles at a low N/P ratio of 3.0. This work presents an innovative solution for the revitalization of dead Zn to extend the lifespan of deep-cycling metal batteries.

Interfacial Engineering of Polymer Membranes with Intrinsic Microporosity for Dendrite-free Zinc Metal Batteries.

Metallic zinc has emerged as a promising anode material for high-energy battery systems due to its high theoretical capacity (820 mA h g-1), low redox potential for two-electron reactions, cost-effectiveness and inherent safety. However, current zinc metal batteries face challenges in low coulombic efficiency and limited longevity due to uncontrollable dendrite growth, the corrosive hydrogen evolution reaction (HER) and decomposition of the aqueous ZnSO4 electrolyte. Here, we report an interfacial-engineering approach to mitigate dendrite growth and reduce corrosive reactions through the design of ultrathin selective membranes coated on the zinc anodes. The submicron-thick membranes derived from polymers of intrinsic microporosity (PIMs), featuring pores with tunable interconnectivity, facilitate regulated transport of Zn2+-ions, thereby promoting a uniform plating/stripping process. Benefiting from the protection by PIM membranes, zinc symmetric cells deliver a stable cycling performance over 1500 h at 1 mA/cm² with a capacity of 0.5 mAh while full cells with NaMnO2 cathode operate stably at 1 A g-1 over 300 cycles without capacity decay. Our work represents a new strategy of preparing multi-functional membranes that can advance the development of safe and stable zinc metal batteries.

Stable Interlayer Zinc Plating/Stripping in the Maxwell-Wagner Effect-Enhanced Interface.

Zinc metal batteries have recently emerged as a promising stable and reversible anode aqueous battery. However, due to the serious dendrite problem and hydrogen evolution problem of the zinc metal anode, the practical application of the zinc metal battery is limited. Here, we propose Y2O3 as an effective coating, which inhibits hydrogen evolution and side reactions by physical isolation and simultaneously prevents dendrite growth by ensuring a uniform Zn-ion flux and fast transport channels generated by Maxwell-Wagner polarization, thus improving the stability of batteries. Meanwhile, in situ/ex situ characterizations and different simulations are conducted to investigate in detail the effect of Maxwell-Wagner polarization on the performance of Zn metal batteries. The symmetric Y2O3@Zn anode system exhibits a stable electroplating/stripping performance over 780 h and enables the Zn battery to achieve a Coulombic efficiency of up to 99.81% over 1000 cycles by reducing side reactions. The Y2O3@Zn||MnO2 full cell delivers a high energy density of 301.42 Wh kg-1 at a power density of 205.04 W kg-1. The work provides insights into the reversibility and stability of zinc anodes and provides a promising way to promote the practical application of Zn metal batteries.

An Ion-Pumping Quasi-Solid Electrolyte Enabled by Electrokinetic Effects for Stable Aqueous Zinc Metal Batteries.

The practical application of aqueous zinc (Zn) metal batteries (ZMBs) is hindered by the complicated hydrogen evolution, passivation reactions, and dendrite growth of Zn metal anodes. Here, an ion-pumping quasi-solid electrolyte (IPQSE) with high Zn2+ transport kinetics enabled by the electrokinetic phenomena to realize high-performance quasi-solid state Zn metal batteries (QSSZMBs) is reported. The IPQSE is prepared through the in situ ring-opening polymerization of tetramethylolmethane-tri-ß-aziridinylpropionate in the aqueous electrolyte. The porous polymer framework with high zeta potential provides the IPQSE with an electrokinetic ion-pumping feature enabled by the electrokinetic effects (electro-osmosis and electrokinetic surface conduction), which significantly accelerates the Zn2+ transport, reduces the concentration polarization and overcomes the diffusion-limited current. Moreover, the Zn2+ affinity of the polymer and hydrogen bonding interactions in the IPQSE changes the Zn2+ coordination environment and reduces the amount of free H2O, which lowers the H2O activity and inhibits H2O-induced side reactions. Consequently, the highly reversible and stable Zn metal anodes are achieved. The assembled QSSZMBs based on the IPQSE display excellent cycling stability with high capacity retention and Coulombic efficiency. The high-performance quasi-solid state Zn metal pouch cells are demonstrated, showing great promise for the practical application of the IPQSE.

Spontaneous grain refinement effect of rare earth zinc alloy anodes enables stable zinc batteries.

Irreversible interfacial reactions at the anodes pose a significant challenge to the long-term stability and lifespan of zinc (Zn) metal batteries, impeding their practical application as energy storage devices. The plating and stripping behavior of Zn ions on polycrystalline surfaces is inherently influenced by the microscopic structure of Zn anodes, a comprehensive understanding of which is crucial but often overlooked. Herein, commercial Zn foils were remodeled through the incorporation of cerium (Ce) elements via the 'pinning effect' during the electrodeposition process. By leveraging the electron-donating effect of Ce atoms segregated at grain boundaries (GBs), the electronic configuration of Zn is restructured to increase active sites for Zn nucleation. This facilitates continuous nucleation throughout the growth stage, leading to a high-rate instantaneous-progressive composite nucleation model that achieves a spatially uniform distribution of Zn nuclei and induces spontaneous grain refinement. Moreover, the incorporation of Ce elements elevates the site energy of GBs, mitigating detrimental parasitic reactions by enhancing the GB stability. Consequently, the remodeled ZnCe electrode exhibits highly reversible Zn plating/stripping with an accumulated capacity of up to 4.0 Ah cm-2 in a Zn symmetric cell over 4000 h without short-circuit behavior. Notably, a ∼0.4 Ah Zn||NH4V4O10 pouch cell runs over 110 cycles with 83% capacity retention with the high-areal-loading cathode (≈20 mg cm-2). This refining-grains strategy offers new insights into designing dendrite-free metal anodes in rechargeable batteries.

Panthenol Additives with Multiple Coordination Sites Induce Uniform Zinc Deposition and Inhibited Side Reactions for High Performance Aqueous Zinc Metal Battery.

Application of aqueous zinc metal batteries (AZMBs) in large-scale new energy systems (NESs) is challenging owing to the growth of dendrites and frequent side reactions. Here, this study proposes the use of Panthenol (PB) as an electrolyte additive in AZMBs to achieve highly reversible zinc plating/stripping processes and suppressed side reactions. The PB structure is rich in polar groups, which led to the formation of a strong hydrogen bonding network of PB-H2O, while the PB molecule also builds a multi-coordination solvated structure, which inhibits water activity and reduces side reactions. Simultaneously, PB and OTF- decomposition, in situ formation of SEI layer with stable organic-inorganic hybrid ZnF2-ZnS interphase on Zn anode electrode, can inhibit water penetration into Zn and homogenize the Zn2+ plating. The effect of the thickness of the SEI layer on the deposition of Zn ions in the battery is also investigated. Hence, this comprehensive regulation strategy contributes to a long cycle life of 2300 h for Zn//Zn cells assembled with electrolytes containing PB additives. And the assembled Zn//NH4V4O10 pouch cells with homemade modules exhibit stable cycling performance and high capacity retention. Therefore, the proposed electrolyte modification strategy provides new ideas for AZMBs and other metal batteries.

Oriented Metal Stripping for Highly Reversible Zinc Anode.

Aqueous zinc metal batteries are a viable candidate for next-generation energy storage systems, but suffer from poor cycling efficiency of the Zn anode. Emerging approaches aim to regulate zinc plating behavior to suppress uncontrolled dendrites, while the stripping process is seldom considered. Herein, an oriented metal stripping strategy is demonstrated to stabilize the Zn anode by removing high-index facets for exposing the (002) plane through the addition of anionic additive sodium citrate (SC). Consequently, high-index facets that coordinate strongly with SC are preferentially stripped out due to a reduced stripping barrier, rendering stable (002) facet preponderant in epitaxial plating. After repeat stripping/plating, the ultra-high proportion of 93% for (002) and large-size grains of ≈100 µm (six times larger than before) can be obtained. Zn anode shows continuous 25 000 cycles with low overpotential at 100 mA cm-2 in symmetric cells and more than 70 h of stable operation even at an ultra-high depth of discharge of 92.3%. Moreover, an extremely long lifespan of 12 000 cycles at 10 A g-1 with a high capacity retention of 89% is achieved by the assembled Zn//I2 battery. This work provides a distinctive approach to improving the stripping process to design highly efficient zinc anodes for promising aqueous zinc metal batteries.

Reconstructing Solvation Structure by Steric Hindrance-Coordination Push-Pull of Dipolymer-H2O-Zn2+ toward Long-life Aqueous Zinc-Metal Batteries.

Aqueous zinc-metal batteries are prospective energy storge devices due to their intrinsically high safety and cost effectiveness. Yet, uneven deposition of zinc ions in electrochemical reduction and side reactions at the anode interface significantly hinder their development and application. Here, we propose a solvation-interface attenuation strategy enabled by a frustrated tertiary amine amphiphilic dipolymer electrolyte additive. The configuration of superhydrophilic segments with covalently bonded lipophilic spacers enables coupled steric hindrance/coordination, which establishes a balanced push-pull dynamic of dipolymer-H2O-Zn2+. Such interplay reconstructs the solvation structure of Zn2+ and allows the formation of a stable dipolymer-inorganic hybrid solid electrolyte interface (SEI) layer. This SEI layer effectively shields the zinc-metal anode from water and anions, significantly reducing side reactions. In addition, the dipolymer adsorbed at the zinc-metal anode interface regulates the interfacial electrochemical reduction kinetics and ensures uniform zinc deposition. As a result, the Zn-Zn symmetric cells with dipolymer-containing electrolyte exhibit remarkable cycling stability exceeding 5800 h (242 days). The Zn-NVO batteries and Zn-AC hybrid ion supercapacitors also deliver stable cycling for up to 1440 h (60 days) with high-capacity retention over 80 %. This research demonstrates the potential to facilitate the development and commercialization of zinc-based energy storage devices.

One-stone, two birds: One step regeneration of discarded copper foil in zinc battery for dendrite-free lithium deposition current collector.

The ever-growing requirement for electrochemical energy storage has exacerbated the production of spent batteries, and the recycling of valuable battery components has recently received a remarkable attention. Among all battery components, copper foil is widely utilized as a current collector for stable zinc platting and stripping in zinc metal batteries (ZMBs) due to the perfect lattice matching of between metal copper and zinc, which is accompanied by the formation of multiple copper-zinc alloy components during the cycling process. Herein, a novel "two birds with one-stone" strategy through a one simple heat treatment step to revive the discarded copper foil in zinc metal battery is reported to further obtain a lithiophilic current collector (CuxZny-Cu) with multiple copper-zinc alloy components on the surface of the discarded copper foil. Such revived CuxZny-Cu current collector greatly reduces the lithium nucleation overpotential and realizes uniform lithium deposition and further inhibits lithium dendrites growth. The formed multiple CuxZny alloy phases on the surface of discarded copper foil exhibit a low Li nucleation overpotential of only 15 mV at 0.5 mA cm-2 for the first cycle. Moreover, such a CuxZny-Cu current collector could achieve stable cycle for 220 cycles at 0.5 mA cm-2 and 110 cycles at 1 mA cm-2 with a Li plating capacity of 1 mAh cm-2. Theoretical calculations indicate that, compared with pure Cu foil, the formed multiple alloy components of CuZn5, CuZn8, Cu0.61Zn0.39 and CuZn have low adsorption energy of -2.17, -2.55, -2.16 and -2.35 eV with lithium atoms, respectively, which result in reduced lithium nucleation overpotential. The full cell composed of CuxZny alloy current collector with deposition of 5 mAh cm-2 metal Li anode coupled with LiFePO4 (LFP) cathode exhibits a reversible capacity of 125.6 mAh/g after 110 cycles at a current of 0.5 C with capacity retention of 85.1 %. This work proposed a promising strategy to regenerate the discarded copper foil in rechargeable batteries.

Ether-Water Co-Solvent Electrolytes Enhanced Vanadium Oxide Cathode Cyclic Behaviors for Zinc Batteries.

Vanadium-based compounds are fantastic cathodes for aqueous zinc metal batteries due to the high specific capacity and excellent rate capability. Nevertheless, the practical application has been hampered by the dissolution of vanadium in traditional aqueous electrolytes owing to the strong polarity of water molecules. Herein, we propose a hybrid electrolyte made of Zn(ClO4)2 salt in tetraethylene glycol dimethyl ether (G4) and H2O solvents to upgrade the cycle life of Zn//K0.486V2O5 battery. The G4 jointly solvates with Zn2+ ions and replaces a portion of the H2O molecules in the Zn2+ solvation sheath. It forms a strong bond with H2O, reducing its activity, and significantly inhibiting vanadium dissolution and water-induced parasitic reaction. Consequently, the optimized electrolyte with H2O and G4 volume ratio of 5 : 5 enhances the cycling stability of Zn//K0.486V2O5 battery, enabling it to reach up to 600 cycles. In addition, the battery demonstrates a satisfactory reversible capacity of 475.7 mAh g-1 and excellent rate performance attributed to the moderate ionic conductivity (28.8 mS cm-1) of the hybrid electrolyte. Last but not least, in the optimized electrolyte, the symmetric Zn//Zn cells deliver a long cycling performance of 400 h, while the asymmetric Zn//Cu cells shows a high average coulombic efficiency of 97.4 %.

Activating the Intrinsic Zincophilicity of PAM Hydrogel to Stabilize the Metal-Electrolyte Dynamic Interface for Stable and Long-Life Zinc Metal Batteries.

As a potential material to solve rampant dendrites and hydrogen evolution reaction (HER) problem of aqueous zinc metal batteries (AZMB), hydrogel electrolytes usually require additional additives or multi-molecular network strategies to solve existing problems of ionic conductivity, mechanical properties and interface stability. However, the intrinsic zincophilic properties of the gel itself are widely neglected leading to the addition of additional molecules and the complexity of the preparation process. In this work, we innovatively utilize the characteristics of acrylamide's high zincophilic group density, activating the intrinsic zincophilic properties of PAM gel through a simple concentration control strategy which reconstructs a novel zinc-electrolyte interface different from conventional PAM electrolyte. The activated novel gel electrolyte with intrinsic zincophilic properties has high ionic conductivity and effectively suppresses water activity, thereby inhibiting HER corrosion. Meanwhile, it induces uniform deposition of (002) crystal planes, leading to excellent deposition kinetics and long cycle life, thereby ensuring high interfacial stability. Compared with conventional PAM gel electrolytes, the activated zincophilic group-rich hydrogel maintained excellent cycling stability (1 mA/cm2, 1 mAh/cm2) over 2250 hours; The Zn//MnO2 coin cell using novel zincophilic group -rich hydrogel still retains a high specific capacity of more than 170 mAh/g at 0.5 A/g after 1000 cycles.

Correlating Buffering Agents' Premier pH with Interface Stability Toward Long-Term Zn Metal Anodes.

Aqueous solvents in Zn metal batteries inevitably induces hydrogen evolution reactions (HER) due to fluctuating pH levels in electrolytes, leading to severe side reactions and dendrite growth. To address these challenges, buffering agents have been recently proposed as a solution to maintain constant electrolyte pH values upon cycling. Nonetheless, the critical role of buffering additives' premier pH in determining interface stability is largely overlooked. Herein, two types of buffering agents, single amphoteric and conjugate acid-base pairs, are employed to correlate their initial pHs with the interface stability. Based on the observations, the lifetime of Zn metal anodes initially increases and then decreases as the initial pH level goes up from 2.0 to 5.0, with an optimal lifetime at pH 3.3 for both buffering agent categories. This phenomenon lies in ample H+ in low pH and rich OH- in high pH, leading to either severe HER or by-products passivation layer. The optimized pH allows cells to deliver a high average Coulombic efficiency of 99.61% over 1500 cycles at a large current density of 5 mA cm-2, which is significantly superior to 345 cycles achieved in the pristine electrolyte. Furthermore, this enhanced interface enables stable Zn/activated carbon full batteries over 15 000 cycles.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures.

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Design Strategies toward High-Utilization Zinc Anodes for Practical Zinc-Metal Batteries.

Aqueous Zn-metal batteries (AZMBs) hold a promise as the next-generation energy storage devices due to their low cost and high specific energy. However, the actual energy density falls far below the requirements of commercial AZMBs due to the use of excessive Zn as anode and the associated issues including dendritic growth and side reactions. Reducing the N/P ratio (negative capacity/positive capacity) is an effective approach to achieve high energy density. A significant amount of research has been devoted to increasing the cathode loading and specific capacity or tuning the Zn anode utilization to achieve low N/P ratio batteries. Nevertheless, there is currently a lack of comprehensive overview regarding how to enhance the utilization of the Zn anode to balance the cycle life and energy density of AZMBs. In this review, we summarize the challenges faced in achieving high-utilization Zn anodes and elaborate on the modifying strategies for the Zn anode to lower the N/P ratio. The current research status and future prospects for the practical application of high-performance AZMBs are proposed at the end of the review.

Self-Adaptive Liquid Film: Dynamic Realization of Dendrite-Free Zn Deposition Toward Ultralong-Life Aqueous Zn Battery.

The poor reversibility and stability of Zn metal anode (ZMA) caused by uncontrolled Zn deposition behaviors and serious side reactions severely impeded the practical application of aqueous Zn metal battery. Herein, a liquid-dynamic and self-adaptive protective layer (LSPL) was constructed on the ZMA surface for inhibiting dendrites and by-products formation. Interestingly, the outer LSPL consists of liquid perfluoropolyether (PFPE), which can dynamically adapt volume change during repeat cycling and inhibit side reactions. Moreover, it can also decrease the de-solvation energy barrier of Zn2+ by strong interaction between C-F bond and foreign Zn2+ , improving Zn2+ transport kinetics. For the LSPL inner region, in-situ formed ZnF2 through the spontaneous chemical reaction between metallic Zn and part PFPE can establish an unimpeded Zn2+ migration pathway for accelerating ion transfer, thereby restricting Zn dendrites formation. Consequently, the LSPL-modified ZMA enables reversible Zn deposition/dissolution up to 2000 h at 1 mA cm-2 and high coulombic efficiency of 99.8% at 4 mA cm-2 . Meanwhile, LSPL@Zn||NH4 V4 O10 full cells deliver an ultralong cycling lifespan of 100 00 cycles with 0.0056% per cycle decay rate at 10 A g-1 . This self-adaptive layer provides a new strategy to improve the interface stability for next-generation aqueous Zn battery.

Coulombic Efficiency for Practical Zinc Metal Batteries: Critical Analysis and Perspectives.

Climate change and energy depletion are common worries of this century. During the global clean energy transition, aqueous zinc metal batteries (AZMBs) are expected to meet societal needs due to their large-scale energy storage capability with earth-abundant, non-flammable, and economical chemistries. However, the poor reversibility of Zn poses a severe challenge to AZMB implementation. Coulombic efficiency (CE) is a quantitative index of electrode reversibility in rechargeable batteries but is not well understood in AZMBs. Thus, in this work,  the state-of-art CE to present the status quo of AZMB development is summarized.  A fictional 120 Wh kg-1 AZMB pouch cell is also proposed and evaluated revealing the improvement room and technical goal of AZMB chemistry. Despite some shared mechanisms between AZMBs and lithium metal batteries, misconceptions prevalent in AZMBs are clarified. Essentially, AZMB has its own niche in the market with unique merits and demerits. By incorporating academic and industrial insights, the development pathways of AZMB are suggested.

Towards a high-performance anode for zinc metal batteries: A tri-functional nitrogen-defective graphitic carbon nitride material for anode protection.

As an important potential candidate for large-scale energy storage, rechargeable zinc metal batteries have become a research hotspot. Zn metal anodes are an extremely crucial component of rechargeable Zn metal batteries. However, the Zn dendrites, the evolution of hydrogen and side reactions on the surface of the Zn metal anodes severely hinder its commercial use. Here, we report a modified Zn metal anode with a layer of nitrogen-defective graphitic carbon nitride (NDCN) nanosheets coated onto a commercial Zn foil by a simple spraying method. The NDCN coating on the anode's surface not only provides zincophilic sites, but also drives the deposition of zinc with a particular crystallographic orientation. At the same time, the formation of zinc dendrites and the evolution of hydrogen were suppressed, which enhanced the reversibility of the anode. Thus, the symmetric cells with the NDCN-protected zinc foil (NDCN@Zn) electrodes remained stable for 2000 h at a current density of 5 mA cm-2. More importantly, the long-term cycling performance of the full cell tested at 1 A g-1 retained approximately 88 % of its capacity even after 2300 cycles. This simple but effective method will provide a reference for future studies on protecting the anodes of zinc metal batteries.