Eudragit L100-coated nintedanib nanocrystals improve oral bioavailability by reducing drug particle size and maintaining drug supersaturation.

The aim of this study was to prepare nintedanib nanocrystals (BIBF-NCs) to lower the solubility of the drug in the stomach, maintain the supersaturation of the drug in the intestine, and improve the oral absorption of nintedanib (BIBF). In this study, BIBF-NCs were prepared by acid solubilization and alkaline precipitation following nano granding method, with a particle size of 290.80 nm and a zeta potential of -49.13 mV. Subsequently, Nintedanib enteric-coated nanocrystals (BIBF-NCs@L100) were obtained by coating with Eudragit L100. The microscopic morphology, crystalline characteristics, stability, and in vitro dissolution of BIBF-NCs and BIBF-NCs@L100 were also studied. In addition, the in vivo pharmacokinetic behaviors of Samples prepared according to the prescription process of commercially available soft capsules (soft capsules), BIBF-NCs, and BIBF-NCs@L100 were further investigated. The results showed that the oral bioavailability of BIBF-NCs and BIBF-NCs@L100 were increased by 1.43 and 2.58 times, compared with that of the soft capsules. BIBF-NCs@L100 effectively reduced the release of BIBF in the formulation in the stomach, allowing more drug to reach the intestine in the form of nanocrystals, maintaining the supersaturation in the intestine, thereby improving the oral bioavailability of the drug.

Multifunctional Size-Expandable Nanomedicines Enhance Tumor Accumulation and Penetration for Synergistic Chemo-Photothermal Therapy.

Size expansion can effectively improve tumor accumulation of nanocarriers where precise control is required. A dual-responsive nanocarrier stimulated by both endogenous pH and exogenous heat stimuli can change its size. Herein, a nanoparticle composed of poly(N,N-diethyl acrylamide) (PDEAA) and poly(2-(diisopropylamino) ethyl methacrylate) (PDPA) is developed. The antitumor drug celastrol (CLT) and the photosensitizer indocyanine green (ICG) are then loaded in it to form CIPP. ICG generates heat under near-infrared (NIR) stimulation to kill tumor cells and enhance CIPP penetration. Meanwhile, CIPP expands in response to hyperthermia and acid tumor microenvironments, preventing itself from returning to the blood flow, thus accumulating in tumor sites. Ultimately, the acidic lysosomal environment in tumor cells disintegrates CIPP to release CLT, directly inducing immunogenic cell death and sensitizing tumor cells for hyperthermia by disrupting the interaction of heat shock protein 90 and P50cdc37. Most of the tumors in B16F10-bearing mice are eradicated after single laser irradiation. The dual-responsive CIPP with multiple functions and simple design displays a synergistic antitumor effect. This study provides a basis for developing size-expandable stimulus-responsive drug delivery systems against tumors.

Development of Gelucire® 48/16 and TPGS Mixed Micelles and Its Pellet Formulation by Extrusion Spheronization Technique for Dissolution Rate Enhancement of Curcumin.

The oral bioavailability of curcumin is limited, attributed to its low solubility or dissolution and poor absorption. Herein, the study describes formulation of curcumin-loaded mixed micelles of Gelucire® 48/16 and TPGS for its dissolution rate enhancement. Curcumin was dispersed in these molten lipidic surfactants which was then adsorbed on carrier and formulated as pellets by extrusion spheronization. Critical micelle concentration (CMC) of binary mixture of Gelucire® 48/16 and TPGS was lower than their individual CMC demonstrating the synergistic behavior of mixture. Thermodynamic parameters like partition coefficient and Gibbs free energy of solubilization indicated that mixed micelles were more efficient than micelles of its individual components in curcumin solubilization. Dynamic light scattering (DLS) suggested slight increase in micellar size of mixed micelles than its components suggesting curcumin loading in mixed micelles. Fourier transform infrared spectroscopy (FTIR) revealed that phenolic hydroxyl group interacts with lipids which contribute to its enhanced solubility. Furthermore, the differential scanning calorimetry (DSC) and X-ray diffraction (XRD) study indicated the conversion of crystalline curcumin into amorphous form. In the pellet formulation, Gelucire® 48/16 acted as a binder and eliminated the requirement of additional binder. Microcrystalline cellulose (MCC) forms wet mass and retards the release of curcumin from pellets. Increase in concentration of water-soluble diluent increased drug release. The optimized formulation released more than 90% drug and maintains supersaturation level of curcumin for 2 h. Thus, mixed micellar system was effective delivery system for curcumin while pellet formulation is an interesting formulation strategy consisting semi-solid lipids.

The effect of some acrylic polymers on dissolution of celecoxib solid dispersion formulations.

OBJECTIVE: The purpose of the present study was firstly to identify the effectiveness of Eudragit® polymers (Eudragit® RL, RS, L100-55, L100, S100 and E100) in inhibition of celecoxib precipitation from buffer solutions (pH = 6.8). Furthermore, the influence of Eudragit® polymers on non-sink dissolution behavior of celecoxib from solid dispersions was investigated. METHODS: Solid dispersions were prepared by the rotary evaporation method. In vitro dissolution studies, FT-IR and differential scanning calorimetry were employed to characterize the formulations. RESULTS: The results revealed that Eudragit® E100, L100 and S100 inhibited precipitation of celecoxib efficiently. It is understood that crystallization during the dissolution of solid dispersions could happen through crystallization from solid matrix following contact with the dissolution medium or from the supersaturated solution produced following dissolution. The supersaturated drug concentrations attained from the dissolution of Eudragit®-celecoxib solid dispersions were almost similar, suggesting that crystallization from solid matrix did not occur readily. However, only solid dispersions containing efficient crystallization inhibitor polymers were able to maintain the supersaturated solution up to the end of the dissolution run. CONCLUSION: Results revealed that the principal mechanism of attaining supersaturated solution of celecoxib from solid dispersions was related to crystallization inhibition from solution not from solid matrix.

Enhanced oral delivery of insulin via the colon-targeted nanocomposite system of organoclay/glycol chitosan/Eudragit®S100.

This study aimed to develop a ternary nanocomposite system of organoclay, glycol-chitosan, and Eudragit®S100 as an effective colon targeted drug delivery carrier to enhance the oral absorption of insulin. A nanocomplex of insulin and aminoclay was prepared via spontaneous co-assembly, which was then coated with glycol-chitosan and Eudragit S®100 (EGAC-Ins). The double coated nanocomplex, EGAC-Ins demonstrated a high entrapment efficiency of greater than 90% and a pH-dependent drug release. The conformational stability of insulin entrapped in EGAC-Ins was effectively maintained in the presence of proteolytic enzymes. When compared to a free insulin solution, EGAC-Ins enhanced drug permeability by approximately sevenfold in Caco-2 cells and enhanced colonic drug absorption in rats. Accordingly, oral EGAC-Ins significantly reduced blood glucose levels in diabetic rats while the hypoglycemic effect of an oral insulin solution was negligible. In conclusion, EGAC-Ins should be a promising colonic delivery system for improving the oral absorption of insulin.

Colon-Targeted Therapy of Tacrolimus (FK506) in the Treatment of Experimentally Induced Colitis.

BACKGROUND/AIMS: Inflammatory bowel disease is a chronic or remitting/relapsing intestinal inflammation, which comprises Crohn's disease and ulcerative colitis (UC). Severe UC is a life-threatening condition that requires corticosteroids (CS) as a first-line rescue therapy. Some patients are refractory to CS and may require alternative immunosuppressive therapy. Oral tacrolimus (FK506), an immunosuppressive agent, has been reported to be effective in the management of severe refractory UC, but it can cause serious adverse effects. This work aims to study the effect of tacrolimus delivered by a colon-targeted delivery system (CTDS) in a dextran sulfate sodium (DSS)-induced animal model of colitis. MATERIALS AND METHODS: We developed and evaluated an oral CTDS of tacrolimus (FK506) loaded pH-dependent polymeric microspheres, composed of Eudragit® S100 as a pH-sensitive polymer using the oil-in-water emulsion method. The physicochemical properties and drug release profiles of these microparticles in gastrointestinal tract (GIT) conditions were examined. A DSS-induced colitis rat model was used to evaluate the potential remedial and in vivo distribution of microspheres. RESULTS: The pH-microspheres prevented a burst drug release in acidic pH conditions and showed sustained release at a colonic pH. The in vivo distribution study in the rat GIT demonstrated that pH-microspheres were successfully delivered to the inflamed colon. Moreover, it also demonstrated a significant decrease of disease activity and expression of proinflammatory cytokines, such as tumor necrosis factor α, interleukin-1ß (IL-1ß), and IL-6, and minimized the histological and morphometric changes. CONCLUSION: The results confirmed the efficacy of tacrolimus (FK506) CTDs in the management of DSS-induced colitis.

Core-shell-corona chitosan-based micelles for tumor intracellular pH-triggered drug delivery: Improving performance by grafting polycation.

Core-shell-corona chitosan-based micelles were designed for the tumor intracellular pH-triggered doxorubicin (DOX) delivery, via a facile in-situ micellization in an aqueous solution of DOX and polyethylene glycol (PEG) and poly(2-(diisopropylamino) ethyl methacrylate) (PDPA) dual-modified chitosan (PEG-g-CS-g-PDPA). The effect of the PDPA modification on the diameter, drug loading-capacity (DLC) and pH-triggered drug release was investigated for the three different polymerization degrees of PDPA (25, 32, and 42) with a similar modification degree of ~22%. The optimized ones, the core-shell-corona DOX/PEG-g-CS-g-PDPA32 micelles possessed a mean hydrodynamic diameter (Dh) of 211 nm and DLC of 54%, showing an excellent pH-triggered drug release with negligible premature drug leakage in 60 h. Such results indicated that grafting polycation could efficiently improve the performance of the chitosan-based drug delivery system (DDS) for tumor chemotherapy.

An assessment of bioavailability of acrylate based pH-sensitive complexes of lovastatin.

Lovastatin (LSN), a potent anti-hyperlipidemic drug, possesses poor bioavailability due to its very low aqueous solubility. The objective of this study was to establish a relationship between increased drug solubility before reaching site of absorption or increasing drug solubility at target absorption site for accentuated bioavailability of LSN. Composites of LSN with oppositely natured pH-sensitive acrylate polymers, cationic Eudragit EPO (EPO) and anionic Eudragit L100 (L100), were fabricated with physical trituration and kneading methods. Formulations were characterized for solubility, FTIR, PXRD, DSC, SEM, dissolution and bioavailability studies in rats. Interestingly, we observed that physical mixtures of EPO outmatched its kneaded formulations, whereas the physical mixtures and kneaded dispersions of L100 were virtually similar in characteristics. EPO was superior in boosting LSN solubility in the respective medium than the L100. Moreover, EPO produced immediate release profile in gastric environment whereas L100 offered sustained release of LSN in intestinal milieu. Bioavailability studies in rats further supported the EPO formulation in terms of shorter Tmax, higher Cmax and heightened AUC.

Highly Soluble Drugs Directly Granulated by Water Dispersions of Insoluble Eudragit® Polymers as a Part of Hypromellose K100M Matrix Systems.

The aim of the present study was to investigate the suitability of insoluble Eudragit® water dispersions (NE, NM, RL, and RS) for direct high-shear granulation of very soluble levetiracetam in order to decrease its burst effect from HPMC K100M matrices. The process characteristics, ss-NMR analysis, in vitro dissolution behavior, drug release mechanism and kinetics, texture profile analysis of the gel layer, and PCA analysis were explored. An application of water dispersions directly on levetiracetam was feasible only in a multistep process. All prepared formulations exhibited a 12-hour sustained release profile characterized by a reduced burst effect in a concentration-dependent manner. No effect on swelling extent of HPMC K100M was observed in the presence of Eudragit®. Contrary, higher rigidity of formed gel layer was observed using combination of HPMC and Eudragit®. Not only the type and concentration of Eudragit®, but also the presence of the surfactant in water dispersions played a key role in the dissolution characteristics. The dissolution profile close to zero-order kinetic was achieved from the sample containing levetiracetam directly granulated by the water dispersion of Eudragit® NE (5% of solid polymer per tablet) with a relatively high amount of surfactant nonoxynol 100 (1.5%). The initial burst release of drug was reduced to 8.04% in 30 min (a 64.2% decrease) while the total amount of the released drug was retained (97.02%).

Self-assembling water-soluble polymethacrylate-MTX conjugates: The significance of macromolecules architecture on drug conjugation efficiency, the final shape of particles, and drug release.

Water-soluble polymer-methotrexate (MTX) conjugates were obtained via efficient carbodiimide-mediated amidation (E = 17-100%). Binding abilities between water-soluble V-shaped or star-shaped copolymers and MTX were studied by isothermal titration calorimetry spectroscopic (UV-vis, NMR) and microscopic (scanning electron microscopy and transmission electron microscopy) techniques. The efficiency of the amidation reaction has depended on the amount of pendant amino alcohol groups and zeta potential (ZP) values of polymeric carries. The sizes of aggregates formed by polymer-drug conjugates in water increased with the number of copolymer arms (202-774 nm at 37°C). Moreover, the conjugates with the high amount of bounded MTX molecules (nMTX > 78) exhibited negative ZP values. The drug release experiments revealed that the amount of the released MTX depends on pH and can be controlled via shape, topology, and composition of polymeric carrier. Preliminary cytotoxicity studies of V-shaped-MTX conjugate on human immortalized nontumorigenic keratinocyte (HaCaT) cells indicated cytocompatibility of the compound in a wide range of concentrations. The results of our studies have shown that physicochemical and drug release properties of obtained polymer-MTX prodrugs can be tailored via the structure and the topology of the polymeric carrier. Thus conjugates might find the application in a different type of treatment (cancer or psoriasis therapy) and administration (intravenous, dermal, or pulmonary). © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2476-2487, 2019.

Fast dissolving moxifloxacin hydrochloride antibiotic drug from electrospun Eudragit L-100 nonwoven nanofibrous Mats.

Antimicrobial electrospun nonwoven Eudragit L-100 nanofibrous mats containing Moxifloxacin hydrochloride (MOX-HCL) were fabricated for fast dissolving drug delivery systems (DDSs) associated with wound infection. The morphological characterization of nanofibers using ESEM revealed that the average diameter of non-woven nanofibrous mats ranges 200-600 nm. The nanofiber showed cylindrical shape with crack on the surface. Differential scanning calorimetric (DSC) and Wide Angle X-ray diffraction (WAXRD) demonstrate that the drug exists in an amorphous state in the nanofibers. Nanofibrous mats were also tested for mechanical strength, contact angle, swelling assay, haemolysis and disintegration test. In vitro disintegration tests demonstrated that the dissolution of Eudragit L-100 fiber mats was within 25 s which was higher compared to the pure drug. The Eudragit nanofibers showed pH-dependent drug release profiles, with slow release at pH 1.2 and burst release (around 30 s) at pH 6.8. The in-vitro quantitative and qualitative antimicrobial assay showed that the developed Eudragit L-100 nanofibrous mats with MOX-HCL concentration of 1%, 5% and 15 wt% exhibited antibacterial activities against both gram positive (Staphylococcus aureus) and gram negative (Escherichia coli) bacteria. The in-vitro cytotoxicity assay using mouse fibroblast NIH/3T3 cells demonstrated significant biocompatibility of nanofiber mats. As per the results of biological evaluation, Eudragit L-100 nanofibrous mats with 1wt% MOX-HCL could be a suitable substrate for biomedical applications. Eudragit L-100 nanofibrous mats containing Moxifloxacin hydrochloride (MOX-HCL) showed immediate DDSs for localized drug release in the wound infection at slightly acidic or alkaline conditions where faster drug release rate is required for wound healing.

Site-directed non-covalent polymer-drug complexes for inflammatory bowel disease (IBD): Formulation development, characterization and pharmacological evaluation.

Inflammatory Bowel Diseases (IBD) is a debilitating condition that affects ~70,000 new people every year and has been described as "an expensive disease with no known cure". In addition, IBD increases the risk of developing colon cancer. The current therapeutics for IBD focus on the established disease where the immune dysfunction and bowel damage have already occurred but do not prevent or delay the progression. The current work describes a polymer-based anti-inflammatory technology (Ora-Curcumin-S) specifically targeted to the luminal side of the colon for preventing and/or treating IBD. Ora-Curcumin-S was prepared by molecular complexation of curcumin with a hydrophilic polymer Eudragit® S100 using co-precipitation method. Curcumin interacted with the polymer non-covalently and existed in an amorphous state as demonstrated by various physicochemical techniques. Ora-Curcumin-S is a polymer-drug complex, which is different than solid dispersions in that the interactions are retained even after dissolving in aqueous buffers. Ora-Curcumin-S was >1000 times water soluble than curcumin and importantly, the enhanced solubility was pH-dependent, which was observed only at pHs above 6.8. In addition, around 90% of Ora-Curcumin-S was stable in phosphate buffer, pH 7.4 and simulated intestinal fluid after 24 h, in contrast to 10-20% unformulated curcumin. Ora-Curcumin-S inhibited Monophosphoryl Lipid-A and E. coli induced inflammatory responses in dendritic cells and cells over expressing Toll-Like Receptor-4 (TLR-4) suggesting that Ora-Curcumin-S is a novel polymer-based TLR-4 antagonist. Preliminary pharmacokinetics in mice showed targeted delivery of soluble curcumin to the colon lumen without exposing to the systemic circulation. Furthermore, Ora-Curcumin-S significantly prevented colitis and associated injury in a mouse model of ulcerative colitis estimated using multiple preclinical parameters: colonoscopy pictures, body weight, colon length, colon edema, spleen weight, pro-inflammatory signaling and independent pathological scoring. Overall, the outcome of this innovative proof-of-concept study provides an exciting and locally-targeted pathway for a dietary therapeutic option for IBD patients to help limit colonic inflammation and thus susceptibility to colitis-associated colorectal cancer.

Histidine-rich glycoprotein-induced vascular normalization improves EPR-mediated drug targeting to and into tumors.

Tumors are characterized by leaky blood vessels, and by an abnormal and heterogeneous vascular network. These pathophysiological characteristics contribute to the enhanced permeability and retention (EPR) effect, which is one of the key rationales for developing tumor-targeted drug delivery systems. Vessel abnormality and heterogeneity, however, which typically result from excessive pro-angiogenic signaling, can also hinder efficient drug delivery to and into tumors. Using histidine-rich glycoprotein (HRG) knockout and wild type mice, and HRG-overexpressing and normal t241 fibrosarcoma cells, we evaluated the effect of genetically induced and macrophage-mediated vascular normalization on the tumor accumulation and penetration of 10-20 nm-sized polymeric drug carriers based on poly(N-(2-hydroxypropyl)methacrylamide). Multimodal and multiscale optical imaging was employed to show that normalizing the tumor vasculature improves the accumulation of fluorophore-labeled polymers in tumors, and promotes their penetration out of tumor blood vessels deep into the interstitium.

Development of Novel Indole-3-Aldehyde-Loaded Gastro-Resistant Spray-Dried Microparticles for Postbiotic Small Intestine Local Delivery.

Considering the recent evidence on the therapeutic potential of postbiotics, this study focused on 2 main goals: (1) to develop an enteric microparticle (MP) formulation for intestinal localized delivery of indole-3-aldehyde (3-IAld) (a microbial-derived metabolite produced by the host's lactobacilli during the catabolic pathway of tryptophan) and (2) to provide support in the employment of spray-drying as innovative one-step manufacturing technique for enteric products. For this purpose, special attention was taken in the knowledge of the influence of equipment setup and feedstock properties on MP enteric behavior. Eudragit® S100 and L100 and ethyl cellulose were used as wall materials and NaOH and ethanol solutions as solvent systems. 3-IAld loading was maintained at 10% w/w. As postulated, feedstock properties influenced spray-drying regime. In addition, they prevailed over other spray-drying process factors in determining MP enteric behavior. Albeit the high buckling regime that produced crumped particles, gastro resistance was obtained by spray-drying 2:1 Eudragit® S100:L100 with 30% w/w ethyl cellulose in ethanol solution. These results support the use of spray-drying as a method for manufacturing gastro-resistant MP. The obtained 3-IAld-loaded enteric MP will be useful to investigate novel postbiotic-based treatments in different therapeutic areas.

Combination Strategy with Complexation Hydrogels and Cell-Penetrating Peptides for Oral Delivery of Insulin.

In previous studies we showed that the complexation hydrogels based in poly(methacrylic acid-g-ethylene glycol) [P(MAA-g-EG)] rapidly release insulin in the intestine owing to their pH-dependent complexation properties; they also exhibit a high insulin-loading efficiency, enzyme-inhibiting properties, and mucoadhesive characteristics. Cell-penetrating peptides (CPPs), such as oligoarginines [hexa-arginine (R6), comprising six arginine residues], have been employed as useful tools for the oral delivery of therapeutic macromolecules. The aim of our study was to investigate the combination strategy of using P(MAA-g-EG) hydrogels with R6-based CPPs to improve the intestinal absorption of insulin. A high efficiency of loading into crosslinked P(MAA-g-EG) hydrogels was observed for insulin (96.1±1.4%) and R6 (46.6±3.8%). In addition, immediate release of the loaded insulin and R6 from these hydrogels was observed at pH 7.4 (80% was released in approximately 30 min). Consequently, a strong hypoglycemic response was observed (approximately 18% reduction in blood glucose levels) accompanied by an improvement in insulin absorption after the co-administration of insulin-loaded particles (ILP) and R6-loaded particles (ALP) into closed rat ileal segments compared with that after ILP administration alone. These results indicate that the combination of P(MAA-g-EG) hydrogels with CPPs may be a promising strategy for the oral delivery of various insulin preparations as an alternative to conventional parenteral routes.

Miktoarm Amphiphilic Block Copolymer with Singlet Oxygen-Labile Stereospecific ß-Aminoacrylate Junction: Synthesis, Self-Assembly, and Photodynamically Triggered Drug Release.

Incorporation of a desired stimuli-responsive unit in a stereospecific manner at the specific location within a nonlinear block copolymer architecture is a challenging task in synthetic polymer chemistry. Herein, we report a facile and versatile method to synthesize AB2 miktoarm block copolymers bearing a singlet oxygen (1O2)-labile regio and stereospecific ß-aminoacrylate linkage with 100% E-configuration at the junction via a combination of amino-yne click chemistry and ring opening polymerization. Using this strategy, a series of 1O2-responsive AB2 amphiphilic miktoarm (MA) copolymers composed of hydrophilic polyethylene glycol (PEG) as the A constituent and hydrophobic polycaprolactone (PCL) as the B constituent (MA-PEG- b-PCL2) was synthesized by varying the block length of PCL. The self-assembly characteristics of these well-defined MA-PEG- b-PCL2 copolymers in an aqueous condition were studied by solvent displacement and thin-film hydration method, and their morphologies were investigated using transmission electron microscopy. The copolymers formed spherical, cylindrical, or lamella morphologies, depending on the chain length and preparation conditions. A hydrophobic photosensitizer chlorin e6 (Ce6) and anticancer drug doxorubicin (DOX) were efficiently encapsulated into the hydrophobic core of MA-PEG- b-PCL2 copolymer micelles. These coloaded micelles were taken up by human breast cancer (MDA-MB-231) cells. Upon red laser light irradiation, the 1O2-generated by the Ce6 induced photocleavage of the ß-aminoacrylate moiety, leading to the dissociation of the micellar structure and triggered intracellular drug release for effective therapy. Overall, rapid disassembly upon 1O2 generation and subsequent controlled intracellular drug release suggested that these micelles bearing ß-aminoacrylate linkage have a huge potential for on-demand drug delivery.

Sustained ophthalmic delivery of highly soluble drug using pH-triggered inner layer-embedded contact lens.

In the present work the feasibility of using inner layer-embedded contact lenses (CLs) to achieve sustained release of highly water soluble drug, betaxolol hydrochloride (BH) on the ocular surface was investigated. Blend film of cellulose acetate and Eudragit S100 was selected as the inner layer, while silicone hydrogel was used as outer layer to construct inner layer-embedded contact lenses. Influence of polymer ratio in the blend film on in vitro drug release behavior in phosphate buffered solution or simulated tear fluid was studied and drug-polymer interaction, erosion and swelling of the blend film were characterized to better understand drug-release mechanism. Storage stability of the inner layer-embedded contact lenses in phosphate buffer solution was also conducted, with ignorable drug loss and negligible change in drug release pattern within 30 days. In vivo pharmacokinetic study in rabbits showed sustained drug release for over 240 h in tear fluid, indicating prolonged drug precorneal residence time. In conclusion, cellulose acetate/Eudragit S100 inner layer-embedded contact lenses are quite promising as controlled-release carrier of highly water soluble drug for ophthalmic delivery.

Enhanced oral absorption of sorafenib via the layer-by-layer deposition of a pH-sensitive polymer and glycol chitosan on the liposome.

This study aimed to design the effective formulation of sorafenib (SF) to enhance the oral drug absorption. Three liposomal formulations of SF were prepared including uncoated liposome (SF-Lip), glycol chitosan-coated liposome (GC-SF-Lip), and Eudragit S100-glycol-chitosan coated liposome (SGC-SF-Lip). All formulations showed a narrow size distribution with a high encapsulation efficiency. Both GC-SF-Lip and SGC-SF-Lip exhibited good stability at acidic and neutral pHs without any significant drug leakage, while SF-Lip appeared to be unstable at pH 1.2. In the case of double coated SGC-SF-Lip, its size changed significantly at pH 7.4, due to the dissolution of Eudragit S100 coating layer into the surrounding medium. Compared to SF solution, all liposomal formulations demonstrated a higher cellular uptake in Caco-2 cells. In particular, SGC-SF-Lip displayed a lower cellular uptake than GC-SF-Lip at pH 6.5, but it achieved a similar cellular uptake to GC-SF-Lip at pH 7.4. Consistently, SGC-SF-Lip was less cytotoxic than GC-SF-Lip at pH 6.5, whereas it showed a comparable cytotoxicity to GC-SF-Lip at pH 7.4, implying the removal of the Eudragit S100 coating layer at pH 7.4. After an oral administration to rats, SGC-SF-Lip significantly improved the systemic exposure of SF, where its Cmax and AUC were approximately fourfold higher than the untreated drug. Collectively, SGC-SF-Lip appeared to be promising to enhance the oral absorption of SF.

Guargum and Eudragit ® coated curcumin liquid solid tablets for colon specific drug delivery.

Colorectal cancer, also known as bowel cancer, is the uncontrolled cell growth in the colon or rectum (parts of the large intestine), or in the appendix. The colon specific drug delivery would alleviate the systemic side effects and would assure the safe therapy for colonic disorders with minimum dose and duration of therapy. The liquisolid technique refers to solubilisation of drug in a non-volatile solvent combined with inclusion of appropriate carrier and coating agent required for tableting. Colon specific degradation of natural polymer, guar gum and pH dependant degradative (pH-7) property of eudragit L100 restricts the delivery of curcumin in gastric and intestinal pH. Formulated curcumin liquisolid powder was evaluated for the micrometric properties, solubility and by differential thermal analysis, X ray powder diffraction and scanning electron microscopy. Curcumin loaded liquisolid tablet showed more anticancer activity against HCT-15 compared with free curcumin. Bioavailability study of the coated and uncoated liquisolid tablets were performed using Newzealand white rabbits. The present study concludes that liquisolid technique is a promising alternative for improving oral bioavailability and dissolution rate of water insoluble drug and coating liquisolid tablet with colon sensitive polymers showed site specific release of drug in the colon.

Macromolecular pHPMA-Based Nanoparticles with Cholesterol for Solid Tumor Targeting: Behavior in HSA Protein Environment.

Nanoparticles (NPs) that form by self-assembly of amphiphilic poly(N-(2-hydroxypropyl)-methacrylamide) (pHPMA) copolymers bearing cholesterol side groups are potential drug carriers for solid tumor treatment. Here, we investigate their behavior in solutions of human serum albumin (HSA) in phosphate buffered saline. Mixed solutions of NPs, from polymer conjugates with or without the anticancer drug doxorubicin (Dox) bound to them, and HSA at concentrations up to the physiological value are characterized by synchrotron small-angle X-ray scattering and isothermal titration calorimetry. When Dox is absent, a small amount of HSA molecules bind to the cholesterol groups that form the core of the NPs by diffusing through the loose pHPMA shell or get caught in meshes formed by the pHPMA chains. These interactions are strongly hindered by the presence of Dox, which is distributed in the pHPMA shell, meaning that the delivery of Dox by the NPs in the human body is not affected by the presence of HSA.