The Current Incidence and Future Projection of Acetabular Fractures in Korea.

BACKGROUND: As one of the most challenging fractures to orthopedic surgeons, acetabular fractures show a wide range of incidence among countries and regions with even more variance in the treatment modalities. In this study, we aimed to investigate the epidemiology of acetabular fractures, and to compare the rate of subsequent total hip arthroplasty (THA) between nonoperative and operative treatments in South Korea using a medical claims database. METHODS: This was a retrospective study using the Korean Health Insurance Review and Assessment database. Patients admitted for acetabular fractures from January 2007 to December 2018 were identified using International Classification of Diseases-10 codes. Kaplan-Meier survival analysis was used to compare the cumulative incidence of THA between two groups. We also evaluated the survivorship of operative group according to the type of institutions. RESULTS: The incidence rate of acetabular fractures increased by 28% between 2007 and 2018. Acetabular fractures were more common in men (62%) than women (38%), and most common in the patients older than 80 years. The number of acetabular fractures was estimated to increase 1.7-fold in 2030 compared to 2018. Operative treatment accounted for 16% of cases, and nonoperative treatment for 84%. The incidence of subsequent THA was higher in the operative treatment group than in the nonoperative group (P < 0.001). The higher rate in the operative treatment group is probably related with the severity of the fracture type. The rate of subsequent THA was higher in patients who initially treated in general hospitals compared with those who were initially treated in tertiary hospitals. CONCLUSION: The incidence of acetabular fractures is increasing in South Korea, in line with global trends. Most acetabular fractures are treated conservatively, and those who receive surgery are more likely to require a subsequent THA. Patients who were operated in general hospitals had highest possibility of subsequent THA after acetabular fractures.

Experimental study on the biomechanical stability of complex acetabular fractures in the quadrilateral area: application of a dynamic anterior titanium-plate screw system.

BACKGROUND AND OBJECTIVE: Complex acetabular fractures involving quadrilateral areas are more challenging to treat during surgery. To date, there has been no ideal internal fixation for these acetabular fractures. The purpose of this study was to evaluate the biomechanical stability of complex acetabular fractures using a dynamic anterior titanium-plate screw system of the quadrilateral area (DAPSQ) by simulating the standing and sitting positions of pelvic specimens. MATERIALS AND METHODS: Eight formal in-preserved cadaveric pelvises aged 30-50 years were selected as the research objects. First, one hip of the normal pelvises was randomly used as the control model (group B) for measurement, and then one hip of the pelvises was randomly selected to make the fracture model in the 8 intact pelvises as the experimental model (group A) for measurement. In group A, acetabular both-column fractures in the quadrilateral area were established, and the fractures were fixed by DAPSQ. The biomechanical testing machine was used to load (simulated physiological load) from 400 N to 700 N at a 1 mm/min speed for 30 s in the vertical direction when the specimens were measured at random in simulated standing or sitting positions in groups. The horizontal displacement and longitudinal displacement of the acetabular fractures in the quadrilateral area were measured in both the standing and sitting simulations. RESULTS: As the load increased, no dislocation or internal fixation breakage occurred during the measurements. In the standing position, the horizontal displacement of the quadrilateral area fractures in group A and group B appeared to be less than 1 mm with loads ranging from 400 N to 700 N, and there was no significant difference between group A and group B (p > 0.05). The longitudinal displacement appeared to be greater than 1 mm with a load of 700 mm in group A (700 N, 2 cases), and the difference was significant between group A and group B (p < 0.05). In the sitting position, the horizontal and longitudinal displacements of the quadrilateral areas were within 0.5 mm in group A and group B, and there was no significant difference between group A and group B (p > 0.05). CONCLUSION: For complex acetabular fractures in the quadrilateral area, DAPSQ fixation may provide early sitting stability, but it is inappropriate for patients to stand too early.

Posterior Wall Fragments in Acetabular Both-Column Fractures: Morphology, Type, and the Significance of its Projection.

OBJECTIVE: Most both-column acetabular fractures are combined with posterior wall fragments. However, the morphology of this posterior wall is varied, and how to fix this posterior wall remains a controversial topic. To investigate the morphological characteristics of posterior wall fragments of both-column acetabular fractures and select corresponding fixation methods. METHODS: Data from 352 patients with acetabular fractures admitted to the level one trauma centre in our hospital between January 2006 and December 2022 were collected. The morphology of posterior wall fragments was observed and analyzed in 83 cases of both-column acetabular fractures and classified according to the consistency of posterior wall morphology. A fracture map of the posterior wall was created on a normal template according to the three morphological types of posterior wall fragments. Finally, the high-incidence area of the posterior wall fracture was projected onto the iliac fossa and the medial side of the posterior column to guide the fixation of the posterior wall fragment using the anterior intrapelvic approach. RESULTS: Fractures were divided into four types: I, large posterior wall fragment which was high in the ilium bone (34 cases, 41.0%); II, posterior wall fragment in the acetabular parietal region (18 cases, 21.7%); III, posterior wall marginal fracture (10 cases, 12.0%); and IV, non-combined posterior wall fracture (21 cases, 25.3%). The most common morphologies of the posterior wall fragments of the first two types were mapped and projected onto the anterior iliac inner plate and medial side of the posterior column, where the corresponding area could be used to guide the insertion of the internal fixation. CONCLUSION: Both-column acetabular fractures combined with posterior wall fractures can be divided into four types according to the morphology of the posterior wall fragment. Understanding the corresponding three-dimensional morphology and projection position of different types of these fragments can help surgeons determine the position and orientation of internal fixation of posterior wall fractures.

Antegrade anterior column acetabulum fracture fixation with cannulated compression headless screws-A biomechanical study on standardized osteoporotic artificial bone.

PURPOSE: Due to the increase in life expectancy and high-energy traumas, anterior column acetabular fractures (ACFs) are also increasing. While open reduction and internal fixation (ORIF) is still the standard surgical procedure, minimally invasive, percutaneous fixation of osteoporotic acetabulum fractures (AF) are growing in popularity. The aim of this biomechanical study was to evaluate the biomechanical competence following antegrade fixation with a standard screw versus a cannulated compression headless screw. METHODS: Eight anatomical osteoporotic composite pelvises were given an anterior column fracture. Two groups of eight specimens each (n = 8) for fixation with either a 6.5 mm cannulated compression headless screw in group Anterior Acetabulum Canulated Compression Headless Screw (AACCH), or with a 6.5 mm partially threaded cannulated screw in group Anterior Acetabulum Standard Screw (AASS) where compared. Each specimen was biomechanically loaded cyclically at a rate of 2 Hz with monotonically increasing compressive load until failure. Motions were assessed by means of optical motion tracking. RESULTS: Initial construct stiffness trended higher in group AACCH at 152.4 ± 23.1 N/mm compared to group AASS at 118.5 ± 34.3 N/mm, p = 0.051. Numbers of cycles and corresponding peak load at failure, were significantly higher in group AACCH at 6734 ± 1669 cycles and 873.4 ± 166.9 N versus group AASS at 4440 ± 2063 cycles and 644.0 ± 206.3 N, p = 0.041. Failure modes were breakout of the screws around the proximal entry point. CONCLUSION: From a biomechanical perspective, group AACCH was associated with superior biomechanical competence compared to standard partially threaded cannulated screws and could therefore be considered as valid alternative for fixation of anterior acetabulum fractures.

Developing a core outcome set for acetabular fractures: a systematic review protocol.

BACKGROUND: Clinical trials investigating acetabular fractures are heterogeneous in their investigated outcomes and their corresponding measurements. Standardization may facilitate comparability and pooling of research results, which would lead to an increase in knowledge about the optimal treatment of acetabular fractures, resulting in long-term evidence-based treatment decisions and improvements in patient care. The aim of this systematic review is to identify the reported outcomes and their measurements from studies on treatments for acetabular fractures to develop a core outcome set which contains the most relevant outcome measures to be included in future studies. METHODS: Studies published in English and German including patients aged 16 years and older, with a surgically treated acetabular fracture, will be included. Studies with nonsurgical treatment, pathologic fractures, polytraumatized patients, and patients younger than 16 years of age will be excluded because other outcomes may be of interest in these cases. Any prospective and retrospective study will be included. Systematic reviews will be excluded, but their included studies will be screened for eligibility. The literature will be searched on MEDLINE, CENTRAL, Web of Science, ClinicalTrials.gov, and WHO ICTRP. Risk of selective reporting of outcomes will be assessed using the Outcome Reporting Bias in Trials classification system. Heterogeneously defined outcomes that measure the same outcome will be grouped and subsequently categorized into outcome domains using the taxonomy of the Core Outcome Measures in Effectiveness Trials Initiative. DISCUSSION: It is expected that a high number of studies will be included, and many outcomes will be identified using different definitions and measurement instruments. A limitation of this systematic review is that only previously investigated outcomes will be detected, thus disregarding potentially relevant outcomes. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42022357644.

Biomechanical Comparison of Fixation Methods for Posterior Wall Fractures of the Acetabulum: Conventional Reconstruction Plate vs. Spring Plate vs. Variable Angle Locking Compression Plate.

Background and Objectives: Acetabular fractures, though infrequent, present considerable challenges in treatment due to their association with high-energy trauma and poor prognoses. Posterior wall fractures, the most common type among them, typically have a more favorable prognosis compared to other types. Anatomical reduction and stable fixation of the posterior wall are crucial for optimal treatment outcomes. This study aimed to biomechanically compare three commonly used fixation methods for posterior wall fractures of the acetabulum-a conventional reconstruction plate, a spring plate, and a 2.7 mm variable angle locking compression plate (VA-LCP). Materials and Methods: The study utilized 6 fresh-frozen cadavers, yielding 12 hemipelvises free from prior trauma or surgery. Three fixation methods were compared using a simple acetabulum posterior wall fracture model. Fixation was performed by an orthopedic specialist, with prebending of plates to minimize errors. Hemipelvises were subjected to quasi-static and cyclic loading tests, measuring fracture gap, stiffness, and displacement under load. Results: It showed no significant differences in fracture gap among the three fixation methods under cyclic loading conditions simulating walking. However, the conventional reconstruction plate exhibited a greater stiffness compared to the spring and variable angle plates. Fatigue analysis revealed no significant differences among the plates, indicating a similar stability throughout cyclic loading. Despite differences in stiffness, all three fixation methods demonstrated adequate stability under loading conditions. Conclusions: While the conventional reconstruction plate demonstrated a superior stiffness, all three fixation methods provided sufficient stability under cyclic loading conditions similar to walking. This suggests that postoperative limitations are unlikely with any of the three methods, provided excessive activities are avoided. Furthermore, the variable angle plate-like the spring plate-offers an appropriate stability for fragment-specific fixation, supporting its use in surgical applications. These findings contribute to understanding the biomechanical performance of different fixation methods for acetabular fractures, facilitating improved surgical outcomes in challenging cases.

[A clinical study of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for acetabular fractures].

Objective: To investigate the effectiveness of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for treatment of acetabular fractures. Methods: The clinical data of 23 patients with acetabular fractures treated with open reduction and internal fixation and infra-acetabular screw placement in two medical centers between June 2022 and October 2023 were retrospectively analyzed. According to the the method of infra-acetabular screw placement, the patients were divided into navigation group (10 cases, using HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement) and freehand group (13 cases, using traditional X-ray fluoroscopy to guide screw placement). There was no significant difference in gender, age, body mass index, cause of injury, time from injury to operation, and Judet-Letournel classification between the two groups ( P>0.05). The time of infra-acetabular screw placement, the fluoroscopy frequency, the guide pin adjustment times, the quality of screw placement, the quality of fracture reduction, and the function of hip joint were compared between the two groups. Results: All patients completed the operation successfully. The time of screw placement, the fluoroscopy frequency, and guide pin adjustment times in the navigation group were significantly less than those in the freehand group ( P<0.05). The quality of screw placement in the navigation group was significantly better than that in the freehand group ( P<0.05). Patients in both groups were followed up 6-11 months, with an average of 7.7 months. There were 9 and 9 cases in the navigation group and the freehand group who achieved excellent and good fracture reduction quality at 1 week after operation, and 12 and 12 cases with excellent and good hip joint function at last follow-up, respectively, and there was no significant difference between the two groups ( P>0.05). The fractures in both groups healed well, and there was no significant difference in healing time ( P>0.05). During the follow-up, there was no complication related to screw placement, such as failure of internal fixation, vascular and nerve injury, incisional hernia. Conclusion: In the treatment of acetabular fractures, compared with the traditional freehand screw placement, the HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement can reduce the time of screw placement, improve the accuracy of screw placement, and reduce the amount of radiation, which is an efficient, accurate, and safe surgical method.

Endopelvic zones and constant fragment mapping in acetabular fractures.

OBJECTIVE: This study aims to characterize the constant fragment (CF) in acetabular fractures and to provide a novel nomenclature of anatomic zones from the vantage point of the endopelvic approach. DESIGN: Retrospective clinical study SETTING: Urban Level I trauma center, Patients/participants: One hundred and eleven consecutive acetabular fractures eligible for an AIP approach and treated surgically. INTERVENTION: 3D mapping of the CF line of fractures using a novel endopelvic anatomical zoning system. MAIN OUTCOME MEASUREMENT: Correlation of Letournel's fracture types to the size of the CF and its location based on precise anatomical nomenclature. RESULTS: The average age of patients was 47 years (range, 12 to 88 years), predominantly comprising male patients (78 %, n = 87) and female patients (22 %, n = 24). Fractures were grouped into 3 categories based on the size of the CF and its location from anterior to posterior. Group 1 included AC fractures which demonstrated the largest CF. The CF nearly always spared Zone 4. Group 2 included transverse fractures, T-Type fractures, and T-Type with posterior wall fractures. The CF was of intermediate size, and it often spared Zone 4. Group 3 included anterior column posterior hemitransverse fractures and associated both column fractures. The CF was the smallest of all categories and rarely spared Zone 4. CONCLUSION: Our analysis suggests consistent and repeatable patterns and sizes of constant fragments. These findings can serve as an endopelvic roadmap for the AIP approach based on fracture types, guiding placement of reduction clamps, vectors of reduction and hardware position.

Epidemiology and patient-reported measurement outcome of pelvic fractures in children and adolescents - A population-based cohort study from the Swedish fracture register.

BACKGROUND AND PURPOSE: Pediatric pelvic fractures are uncommon, representing 0.2-3% of total pediatric fractures. The long-term patient-reported outcome in the pediatric population has not been evaluated yet. The purpose of the study was to describe the epidemiology of pelvic and acetabular fractures in pediatric patients including long-term patient-reported outcomes. PATIENTS AND METHODS: The Swedish Fracture Register (SFR) was used to identify all patients aged 6-17 years at injury with a pelvic fracture between 2015 and 2021. All patients were invited to answer Patient-Reported measurement instruments in 2021. RESULTS: The study cohort consisted of 223 patients with a median age at fracture of 15 years and with 62 % boys. 201 sustained a pelvic and 22 acetabular fractures. Falls were the leading cause of fracture, followed by transport accidents. Most fractures (both pelvis and acetabulum) were type A (73 %), and 21 fractures (9 %) could not be classified according to AO. 85 % of fractures were treated non-surgically. All Type C fractures were treated surgically. Seven PROMIS® profile domains were completed by 31 % of the sample at a mean follow-up time of 3.5 years after pelvic/acetabular fracture. Most patients had "no concern" or "mild concern" but those who had surgery had an inferior t-score in most domains. CONCLUSION: Most fractures occurred in older individuals, with falls during sports activities being the most common cause. This raises important questions about prevention strategies. The PROMIS-Pain-Interference scale indicated that the younger the age at fracture, the more pain was reported at follow-up.

Salvage of Iatrogenic Sciatic Nerve Injury Caused by Operatively Treated Acetabular Fractures: Two Cases and Literature Review.

BACKGROUND: While sciatic nerve injury has been described as a complication of acetabular fractures, iatrogenic nerve injury remains sparsely reported. This study aims to assess iatrogenic sciatic nerve injuries occurring during acetabular fracture surgery, tracking their neurological recovery and clinical outcomes, and investigating any correlation between recovery and the severity of neurologic injury to facilitate physicians in providing prediction of prognosis. CASE PRESENTATION: We present two cases of male patients, aged 56 and 22, who developed sciatic palsy due to iatrogenic nerve injury during acetabular fracture surgery. Iatrogenic sciatic nerve injury resulted from operatively treated acetabular fractures. Surgical exploration, involving internal fixation removal and nerve decompression, successfully alleviated symptoms in both cases postoperatively. At the latest follow-up, one patient achieved full recovery with excellent function, while the other exhibited residual deficits at the L5/S1 root level along with minimal pain. CONCLUSION: Sciatic nerve injury likely stemmed from reduction techniques and internal fixation procedures for the posterior column, particularly when performed with the hip flexed, thereby placing tension on the sciatic nerve. Our case reports underscore the significance of liberal utilization of electrophysiologic examinations and intraoperative monitoring for the prediction of prognosis. Surgical exploration, encompassing internal fixation removal and nerve decompression, represents an effective intervention for resolving sciatic palsy, encompassing both sensory neuropathy and motor symptoms.

Acetabular dysplasia and posterior wall fractures: The missing link?

BACKGROUND: Traumatologists are unable to predict hip instability based on CT scans and standard radiographs in posterior wall (PW) fractures comprising <50-60 % of the wall, necessitating an examination under anesthesia (EUA). Risk factors for instability have not been clarified, but acetabular dysplasia has been theorized as a potential etiology. Unfortunately, dysplasia is difficult to evaluate in the traumatic setting. The purpose of this study was to compare acetabular morphology between unstable and stable fractures with a novel method to detect dysplasia. METHODS: Patients ≥ 18 years old with a PW fracture that underwent an EUA from 2013 to 2023 were retrospectively identified. For our experimental measurements, the axial distances on CT between the acetabular dome, lateral acetabular opening, and femoral head vertex were recorded. Acetabular geometry was quantified at these levels. Conventional dysplasia metrics (e.g., Tonnis angle) were obtained. Variables were compared between stable and unstable fractures. RESULTS: 58 patients met inclusion criteria with 42 stable versus 16 unstable fractures. Unstable fractures had higher distances between the acetabular dome and femoral head vertex (p > 0.05). They had more cranial fracture exit points (p = 0.0015), lower femoral head coverage (p = 0.0102), and lower posterior acetabular sector angles (p = 0.0281). No other differences in acetabular geometry, demographics, injury characteristics, or other markers of dysplasia were identified. CONCLUSIONS: Unstable hips demonstrated a more recessed acetabular dome when compared to stable hips. Posterior acetabular femoral head coverage and cranial fracture exit point may be related to hip instability. A larger sample size is needed to validate these findings.

Fractures in Patients With Diabetes Mellitus: Findings From a 20-year Registry at a Single Level 1 Trauma Center.

INTRODUCTION: Diabetes mellitus (DM) is a risk factor of infection. Although DM has been associated with worse functional outcomes after acetabular fracture, literature regarding the effect of DM on surgical site infection and other early complications is lacking. METHODS: A 20-year registry from a level 1 trauma center was queried to identify 134 patients with DM and 345 nondiabetic patients with acetabular fractures. RESULTS: The diabetic patient population was older (57.2 versus 43.2; P < 0.001) and had higher average body mass index (33.6 versus 29.5; P < 0.001). Eighty-three patients with DM and 270 nondiabetics were treated surgically (62% versus 78%; P < 0.001). Diabetic patients who were younger (54.6 versus 61.4; P = 0.01) with fewer comorbidities (1.7 versus 2.2; P = 0.04) were more frequently managed surgically. On univariate analysis, patients with DM more commonly developed any early infection (28.4% versus 21%; P = 0.049) but were no more likely to develop surgical site infection, or other postoperative complications. Older patient age, length of stay, baseline pulmonary disease, and concurrent abdominal injury were independent predictors of postoperative infection other than surgical site infection. Diabetics that developed infection had more comorbidities (2.4 versus 1.5; P < 0.001) and higher Injury Severity Score (24.1 versus 15.8; P = 0.003), and were more frequently insulin-dependent (72.7% versus 41%; P = 0.01). DISCUSSION: Independent of management strategy, diabetic patients were more likely to develop an infection after acetabular fracture. Insulin dependence was associated with postoperative infection on univariate analysis. Optimal selection of surgical candidates among patients with DM may limit postoperative infections.

Combined anatomical reduction plate for quadrilateral acetabular fractures via a posterior approach: an anatomical-morphological study.

OBJECTIVE: To digitally measure the fixation trajectory of anatomical plates used in the combined reduction of quadrilateral acetabular fractures via the posterior approach, and to develop anatomical plates that align with the characteristics of the pelvis in the Chinese population. METHODS: Pelvic computed tomography (CT) data from 102 adult patients were collected at the Affiliated Hospital of Zunyi Medical University. This group included 51 males and 51 females, aged between 20 and 60 years. Using Mimics software (version 21.0), a three-dimensional model of each pelvic data point was reconstructed. The fixation path for the combined reset anatomical steel plate was drawn, where the curves on the fixation path were approximated as arcs. The radius of curvature and length of these curves were measured, and an anatomical steel plate was designed to best fit the pelvic structure. RESULTS: The combined anatomical reduction plate fixation system for quadrilateral acetabular fractures using a posterior approach consisted of two parts: a locking plate and a reduction plate. The posterior wall region (r2), ischial region (r3), quadrilateral region (r4), and bending region (r5), and the total length of the reduction plate were significantly smaller in females (P < 0.05). Similarly, the posterior wall region (R3), distal posterior wall region (R4), and the total length of the locking plate were significantly smaller in females (P < 0.05). Additionally, the anterior superior iliac spine side (r1) and the total length of the T-shaped auxiliary plate were significantly smaller in females (P < 0.05). The bending angle (< A) was also significantly smaller in females (P < 0.05). CONCLUSIONS: The pelvic surface structure is irregular and varies greatly among individuals.Compared to the traditional steel plate, The combined reduction anatomical plate designed in this study demonstrated high precision and improved conformity to the anatomical structure of the pelvis.

The use of a plate for fixation of the acetabulum.

This study aimed to share our experience of a self-developed plate for acetabular fracture fixation through the presentation of clinical cases. Eight patients with complex acetabular fractures (Letournel classification) underwent surgery using a modified Stoppa approach and the novel plate design between 2021 and 2023 at the National Scientific Center for Traumatology and Orthopedics. Criteria such as the mechanism of injury, type of fracture, surgical approach, intraoperative and postoperative complications, quality of reduction, and functional and radiological results were evaluated. All patients included in the study presented complex types of acetabular fractures according to the Letournel classification. In all cases, surgical interventions were performed using a modified Stoppa approach. The assessment of reduction quality was conducted based on the radiological standards established by Matta. The reduction in quality was excellent in two patients, good in four, and satisfactory in two. One patient developed a post-traumatic false joint requiring additional surgery. The remaining patients achieved fracture healing with satisfactory Harris Hip Score (HHS) scores, indicating good overall function. The results of the self-developed plate for acetabular fracture fixation in our series were satisfactory.

On the Ion Implantation Synthesis of Ag-Embedded Over Sr-Substituted Hydroxyapatite on a Nano-Topography Patterned Ti for Application in Acetabular Fracture Sites.

Introduction: There is an ongoing need for improved healing response and expedited osseointegration on the Ti implants in acetabular fracture sites. To achieve adequate bonding and mechanical stability between the implant surface and the acetabular fracture, a new coating technology must be developed to promote bone integration and prevent bacterial growth. Methods: A cylindrical Ti substrate mounted on a rotating specimen holder was used to implant Ca2+, P2+, and Sr2+ ions at energies of 100 KeV, 75 KeV and 180 KeV, respectively, using a low-energy accelerator to synthesize strontium-substituted hydroxyapatite at varying conditions. Ag2+ ions of energy 100 KeV were subsequently implanted on the as-formed surface at the near-surface region to provide anti-bacterial properties to the as-formed specimen. Results: The properties of the as-formed ion-implanted specimen were compared with the SrHA-Ag synthesized specimens by cathodic deposition and low-temperature high-speed collision technique. The adhesion strength of the ion-implanted specimen was 43 ± 2.3 MPa, which is well above the ASTM standard for Ca-P coating on Ti. Live/dead cell analysis showed higher osteoblast activity on the ion-implanted specimen than the other two. Ag in the SrHA implanted Ti by ion implantation process showed superior antibacterial activity. Discussion: In the ion implantation technique, nano-topography patterned surfaces are not concealed after implantation, and their efficacy in interacting with the osteoblasts is retained. Although all three studies examined the antibacterial effects of Ag2+ ions and the ability to promote bone tissue formation by MC3T3-E1 cells on SrHA-Ag/Ti surfaces, ion implantation techniques demonstrated superior ability. The synthesized specimen can be used as an effective implant in acetabular fracture sites based on their mechanical and biological properties.

Quadrilateral plate classification program of acetabular fractures based on three-column classification: a three-dimensional fracture mapping study.

BACKGROUND: A new classification system for acetabular fractures has been proposed in recent years, which is called the 3-column classification. However, this system does not provide information regarding quadrilateral plate fractures. To address this issue, we utilized three-dimensional (3D) fracture line mapping and heat map to analyze the link between the 3-column classification and quadrilateral plate fractures. METHODS: We collected CT scan data from 177 patients who had been diagnosed with acetabular fractures. Additionally, we utilized a CT scan of a healthy adult to generate a standard acetabular model. We utilized the collected CT data of the fracture to create a 3D model and subsequently reduced it. We then matched each acetabular fracture model with the standard acetabular model and mapped all of the fracture lines to the standard model. 3D fracture lines and heat maps were created by overlapping all fracture lines. Fracture characteristics were then summarized using these maps. RESULTS: This study analyzed a total of 221 acetabular fractures. The most frequently observed fracture type, based on the three-column classification, was A1.2, which corresponds to fractures of the anterior column. In contrast, the least common type of fracture was A4, which represents fractures of the central wall. It was noted that quadrilateral plate fractures were frequently observed in fractures classified as type B and C according to the three-column classification. CONCLUSIONS: Among the three-column classification, the QLP fractures are commonly observed in type B and C. It is important to carefully identify these fractures during the diagnostic process. Therefore, based on the three-column classification, we have amalgamated quadrilateral plate fractures and formulated a classification program for acetabular fractures.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study.

BACKGROUND: Fractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures. METHODS: A retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared. RESULTS: The surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433). CONCLUSION: Combining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery. CLINICAL TRIAL REGISTRATION: 12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn .

Comparison of 2 different fixation techniques of comminuted acetabular quadrilateral surface fractures using square bracket-shaped tubular plate or interfragmentary screws in addition to supra/infrapectineal plate fixation: An observational study.

The management of comminuted quadrilateral fractures remains challenging, and treatment options are constantly evolving. The purpose of the present study was to examine the outcomes of 2 different fixation techniques in the management of comminuted quadrilateral fractures. Twenty-two patients with comminuted quadrilateral acetabular fractures were surgically treated with interfragmentary lag screw (group 1) and square bracket-shaped tubular (SBST) plate technique (group 2), in addition to suprapectineal and infrapectineal pelvic reconstruction plate fixation between January 2016 and July 2019 at our clinic. 2 years follow-up control data of each group were compared in terms of radiological and functional results, and complications. According to the functional score comparison, the mean Merle d'Aubigne Postel scoring system (MAP) score was 15.2/15.6 (P = .632), and the mean Harris hip scoring (HHS) system score was 74.65/77.3 (P = .664) in groups 1 and 2, respectively. Radiological comparison was performed according to matta radiological criteria (MRC), and 2 excellent, 6 good, 2 poor, 4 excellent, 4 good, and 4 poor radiological results were observed in groups 1 and 2, respectively. intraarticular screw penetration was detected in 3 patients in group 1, while there was no articular implant penetration in group 2 (P = .001). We believe that satisfactory results can be obtained with the SBST plate technique, offering functional and clinical outcomes that are similar to those of the interfragmentary screw technique. The SBST plate technique is superior in terms of avoiding intraarticular screw penetration and related revision surgery.

Sleep quality and psychological health in patients with pelvic and acetabulum fractures: a cross-sectional study.

BACKGROUND AND OBJECTIVES: It is known that difficulty sleeping after a fracture can have negative effects on both mental and physical health and may prolong the recovery process. The objective of this study is to explore how sleep quality and psychological health are linked in patients with pelvic and acetabulum fractures. METHODS: A study was conducted on 265 patients between 2018 and 2022 who had suffered pelvic and acetabulum fractures. The study examined various factors, including age, gender, cause of injury, post-operative complications, and injury severity. The study employed ordinal logistic regression to examine the relationship between various pelvic fractures and seven subscales of the Majeed Pelvic Score (MPS), as well as the Sleep Disorder Questionnaire (SDQ) and Beck Depression Inventory (BDI). The study focused on the postoperative outcome one year after surgery, and each patient was assessed at the one-year mark after surgical intervention. Additionally, the study evaluated the functional outcome, sleep quality, and psychological disorders of the patients. RESULTS: From 2018 to 2022, a total of 216 patients suffered from pelvic and acetabulum fractures. Among them, 6.6% experienced borderline clinical depression, and 45.2% reported mild mood disturbances. Anxiety was found to be mild to moderate in 46% of Tile C and posterior acetabulum wall fracture patients. About 24.8% of patients reported insomnia, while 23.1% reported sleep movement disorders. However, no significant correlation was found between fracture types and sleep disorders. The mean Majeed pelvic score (MPS) was 89.68. CONCLUSIONS: Patients with pelvic and acetabular fractures typically experience functional improvement, but may also be at increased risk for insomnia and sleep movement disorders, particularly for certain types of fractures. Psychological well-being varies between fracture groups, with signs of borderline clinical depression observed in some cases. However, anxiety levels do not appear to be significantly correlated with pelvic and acetabular fractures.

Robotic-assisted plate fixation of the anterior acetabulum - clinical description of a new technique.

INTRODUCTION: We present a detailed procedure for the robotic-assisted plate osteosynthesis of an anterior acetabular fracture. The purpose of this work was to describe a robotic-assisted minimally invasive technique as a possible method for reducing complications, pain, and hospitalization. Another goal was to present technical recommendations and to assess potential pitfalls and problems of the new surgical approach. METHODS: Surgery was performed in an interdisciplinary setting by an experienced orthopedic surgeon and a urologist. The DaVinci System with standard instruments was used. Reduction was achieved through indirect traction of a pin that was introduced into the femoral neck and direct manipulation via the plate. The plate position and fixation were achieved through 7 additional minimally invasive incisions. RESULTS: The technique has multiple advantages, such as no detachment of the rectus abdominal muscle, a small skin incision, and minimal blood loss. Furthermore, this approach might lower the incidence of hernia formation, infection, and postoperative pain. DISCUSSION: We see the presented technique as a demanding yet progressive and innovative surgical method for treating acetabular fractures with indications for anterior plate fixation. TRIAL REGISTRATION: The study was approved by the local institutional review board (Nr. 248/18).