Identification of 3-Aryl-1-benzotriazole-1-yl-acrylonitrile as a Microtubule-Targeting Agent (MTA) in Solid Tumors.

Recently, a compound derived from recent scientific advances named 34 has emerged as the focus of this research, the aim of which is to explore its potential impact on solid tumor cell lines. Using a combination of bioinformatics and biological assays, this study conducted an in-depth investigation of the effects of 34. The results of this study have substantial implications for cancer research and treatment. 34 has shown remarkable efficacy in inhibiting the growth of several cancer cell lines, including those representing prostate carcinoma (PC3) and cervical carcinoma (HeLa). The high sensitivity of these cells, indicated by low IC50 values, underscores its potential as a promising chemotherapeutic agent. In addition, 34 has revealed the ability to induce cell cycle arrest, particularly in the G2/M phase, a phenomenon with critical implications for tumor initiation and growth. By interfering with DNA replication in cancer cells, 34 has shown the capacity to trigger cell death, offering a new avenue for cancer treatment. In addition, computational analyses have identified key genes affected by 34 treatment, suggesting potential therapeutic targets. These genes are involved in critical biological processes, including cell cycle regulation, DNA replication and microtubule dynamics, all of which are central to cancer development and progression. In conclusion, this study highlights the different mechanisms of 34 that inhibit cancer cell growth and alter the cell cycle. These promising results suggest the potential for more effective and less toxic anticancer therapies. Further in vivo validation and exploration of combination therapies are critical to improve cancer treatment outcomes.

Theoretical studies on the aqueous phase and graphene heterogeneous degradation of acrylamide and acrylonitrile by HO, ClO, and BrO radicals.

The newly discovered ClO• and BrO• contribute to pollutant degradation in advanced oxidation processes, while acrylamide (AM) and acrylonitrile (ACN) are always the focus of scientists concerned due to their continuous production and highly toxic effects. Moreover, various particles with a graphene-like structure are the companions of AM/ACN in dry/wet sedimentation or aqueous phase existence, which play an important role in heterogeneous oxidation. Thus, this work focuses on the reaction mechanism and environmental effect of AM/ACN with ClO•/BrO•/HO• in the water environment under the influence of graphene (GP). The results show that although the reactivity sequence of AM and ACN takes the order of with HO• > with BrO• > with ClO•, the easiest channel always occurs at the same C-position of the two reactants. The reaction rate constants (k) of AM with three radicals are 2 times larger than that with ACN, and amide groups have a better ability to activate CC bonds than cyanide groups. The existence of GP can accelerate the target reaction, and the k increased by 9-13 orders of magnitude. The toxicity assessment results show that the toxic effect of most products is lower than that of parent compounds, but the environmental risk of products from ClO•/BrO•-adducts is higher than those from HO•-adducts. The oxidative degradation process based on ClO• and BrO• deserves special attention, and the catalytic effect of GP and its derivatives on the oxidation process is non-negligible.

Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse.

A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater. First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3). Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton's reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization. The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater. The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized. The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min. The maximum efficiencies of 73% and 94% and adsorption capacities of 125.95 mg/g and 267.93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively. High removal efficiency was achieved, owing to high surface area of 79.92 m2/g and functional active binding cites on grafted cellulose. Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model. The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times. Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.

Estimating impacts of reducing acrylonitrile exposure on lung cancer mortality in an occupational cohort with the parametric g-formula.

OBJECTIVES: To inform the potential human carcinogenicity of acrylonitrile, we estimate associations between acrylonitrile exposures and lung cancer mortality in US workers with the objectives of (1) assessing potential for healthy worker survivor bias and (2) adjusting for this bias while assessing the expected lung cancer mortality under different hypothetical occupational exposure limits on acrylonitrile exposure using the parametric g-formula. METHODS: We used data from a cohort of 25 460 workers at facilities making or using acrylonitrile in the USA. We estimated HRs to quantify associations between employment and lung cancer mortality, and exposure and leaving employment. Using the parametric g-formula, we estimated cumulative lung cancer mortality at hypothetical limits on acrylonitrile exposure. RESULTS: Recent and current employment was associated with lung cancer, and exposure was associated with leaving employment, indicating potential for healthy worker survivor bias. Relative to no intervention, reducing the historical exposure under limits of 2.0, 1.0 and 0.45 parts per million would have been expected to reduce lung cancer mortality by age 90 by 4.46 (95% CI 0.78 to 8.15), 5.03 (95% CI 0.96 to 9.11) and 6.45 (95% CI 2.35 to 10.58) deaths per 1000 workers, respectively. A larger lung cancer mortality reduction would be expected under elimination of exposure: 7.21 (95% CI 2.72 to 11.70) deaths per 1000 workers. CONCLUSIONS: Healthy worker survivor bias likely led to underestimation of excess risk. Our results corroborate previous study findings of an excess hazard of lung cancer among the highest exposed workers.

Bamboo fiber reinforced poly (acrylonitrile-styrene-acrylic)/chlorinated polyethylene via compabilization.

In the quest to enhance the performance of natural fiber-reinforced polymer composites, achieving optimal dispersion of fiber materials within a polymeric matrix has been identified as a key strategy. Traditional approaches, such as the surface modification of natural fibers, often necessitate the use of additional synthetic chemical processes, presenting a significant challenge. In this work, taking poly (acrylonitrile-styrene-acrylic) (ASA) and bamboo fiber (BF) as a model system, we attempt to use the elastomer-chlorinated polyethylene (CPE) as a compatibilizer to tailor the mechanical properties of ASA/CPE/BF ternary composites. It was found that increasing CPE content contributed to more remarkable reinforcing efficiency, where composite with 15 phr CPE exhibited a nearly four-fold increase in reinforcing efficiency of tensile strength (20 %) compared with that of composite system without CPE (4.1 %). Such improvement was ascribed to the compatibilizing effect exerted by CPE, which prevented the aggregation of BF within polymeric matrix. Surface properties suggested the stronger interface between CPE and BF compared to that between ASA and BF and thereby contributed to the compabilizing effect. Since no chemical process was involved, it is suggested that the introduction of elastomer to be a universal, green and sustainable approach to achieve the reinforcement.

Novel acrylonitrile derived imidazo[4,5-b]pyridines as antioxidants and potent antiproliferative agents for pancreatic adenocarcinoma.

We present the design, synthesis, computational analysis, and biological assessment of several acrylonitrile derived imidazo[4,5-b]pyridines, which were evaluated for their anticancer and antioxidant properties. Our aim was to explore how the number of hydroxy groups and the nature of nitrogen substituents influence their biological activity. The prepared derivatives exhibited robust and selective antiproliferative effects against several pancreatic adenocarcinoma cells, most markedly targeting Capan-1 cells (IC50 1.2-5.3 µM), while their selectivity was probed relative to normal PBMC cells. Notably, compound 55, featuring dihydroxy and bromo substituents, emerged as a promising lead molecule. It displayed the most prominent antiproliferative activity without any adverse impact on the viability of normal cells. Furthermore, the majority of studied derivatives also exhibited significant antioxidative activity within the FRAP assay, even surpassing the reference molecule BHT. Computational analysis rationalized the results by highlighting the dominance of the electron ionization for the antioxidant features with the trend in the computed ionization energies well matching the observed activities. Still, in trihydroxy derivatives, their ability to release hydrogen atoms and form a stable O-H⋯O•⋯H-O fragment upon the H• abstraction prevails, promoting them as excellent antioxidants in DPPH• assays as well.

Biological activity and computational analysis of novel acrylonitrile derived benzazoles as potent antiproliferative agents for pancreatic adenocarcinoma with antioxidative properties.

Continuing our research into the anticancer properties of acrylonitriles, we present a study involving the design, synthesis, computational analysis, and biological assessment of novel acrylonitriles derived from methoxy, hydroxy, and N-substituted benzazole. Our aim was to examine how varying the number of methoxy and hydroxy groups, as well as the N-substituents on the benzimidazole core, influences their biological activity. The newly synthesized acrylonitriles exhibited strong and selective antiproliferative effects against the Capan-1 pancreatic adenocarcinoma cell line, with IC50 values ranging from 1.2 to 5.3 µM. Consequently, these compounds were further evaluated in three other pancreatic adenocarcinoma cell lines, while their impact on normal PBMC cells was also investigated to determine selectivity. Among these compounds, the monohydroxy-substituted benzimidazole derivative 27 emerged with the most profound and broad-spectrum anticancer antiproliferative activity being emerged as a promising lead candidate. Moreover, a majority of the acrylonitriles in this series exhibited significant antioxidative activity, surpassing that of the reference molecule BHT, as demonstrated by the FRAP assay (ranging from 3200 to 5235 mmolFe2+/mmolC). Computational analysis highlighted the prevalence of electron ionization in conferring antioxidant properties, with computed ionization energies correlating well with observed activities.

Luminogenic and Bactericidal Studies of an Acrylonitrile-Based AIEgen.

We have synthesized an aggregation-induced emissive molecule that exhibits promising photophysical characteristics. The aggregating aptitude is demonstrated by binary solvent mixture and it is emissive in both solution and solid state. The luminogenic characteristics are employed in creating fluorescent inks as well as for the detection of nitro antibiotics in biofluids and in solid support. Moreover, the acrylonitrile-based compound is bactericidal tested on E. coli and B. subtilis.

Acrylonitrile derivatives: In vitro activity and mechanism of cell death induction against Trypanosoma cruzi and Leishmania amazonensis.

Leishmaniasis and Chagas disease are parasitic infections that affect millions of people worldwide, producing thousands of deaths per year. The current treatments against these pathologies are not totally effective and produce some side effects in the patients. Acrylonitrile derivatives are a group of compounds that have shown activity against these two diseases. In this work, four novels synthetic acrylonitriles were evaluated against the intracellular form and extracellular forms of L. amazonensis and T. cruzi. The compounds 2 and 3 demonstrate to have good selectivity indexes against both parasites, specifically the compound 3 against the amastigote form (SI = 6 against L. amazonensis and SI = 7.4 against T. cruzi). In addition, the parasites treated with these two compounds demonstrate to produce a programmed cell death, since they were positive for the events studied related to this type of death, including chromatin condensation, accumulation of reactive oxygen species and alteration of the mitochondrial membrane potential. In conclusion, this work confirms that acrylonitriles is a source of possible new compounds against kinetoplastids, however, more studies are needed to corroborate this activity.

Morita-Baylis-Hillman adduct 2-(3-hydroxy-1-methyl-2-oxoindolin-3-il) acrylonitrile (CISACN) ameliorates the pulmonary allergic inflammation in CARAS model by increasing IFN-γ/IL-4 ratio towards the Th1 immune response.

Combined allergic rhinitis and asthma syndrome (CARAS) is an airway-type 2 immune response with a profuse inflammatory process widely affecting the world population. Due to the compromise of quality of life and the lack of specific pharmacotherapy, the search for new molecules becomes relevant. This study aimed to evaluate the effectiveness of the Morita-Bailys-Hillman adduct (CISACN) treatment in the CARAS experimental model. Female BALB/c mice were ovalbumin (OVA) -sensitized and -challenged and treated with CISACN. The treatment decreased the eosinophil migration to the nasal and lung cavities and tissues and the goblet cell hyperplasia/hypertrophy, attenuated airway hyperactivity by reducing the hyperplasia/hypertrophy of the smooth muscle and the extracellular matrix's thickness. Also, the treatment reduced the clinical signs of rhinitis as nasal rubbing and sneezing in a histamine-induced nasal hyperreactivity assay. The immunomodulatory effect of CISACN was by reducing OVA-specific IgE serum level, and IL-33, IL-4, IL-13, and TGF-ß production, dependent on IFN-γ increase. Furthermore, the effect of CISACN on lung granulocytes was by decreasing the p-p38MAPK/p65NF-κB signaling pathway. Indeed, CISACN reduced the p38MAPK and p65NF-κB activation. These data demonstrated the anti-inflammatory and immunomodulatory effects of the CISACN with scientific support to become a pharmacological tool to treat airway inflammatory diseases.

A systemic study of cyenopyrafen in strawberry cultivation system: Efficacy, residue behavior, and impact on honeybees (Apis mellifera L.).

The pesticide application method is one of the important factors affecting its effectiveness and residues, and the risk of pesticides to non-target organisms. To elucidate the effect of application methods on the efficacy and residue of cyenopyrafen, and the toxic effects on pollinators honeybees in strawberry cultivation, the efficacy and residual behavior of cyenopyrafen were investigated using foliar spray and backward leaf spray in field trials. The results showed that the initial deposition of cyenopyrafen using backward leaf spray on target leaves reached 5.06-9.81 mg/kg at the dose of 67.5-101.25 g a.i./ha, which was higher than that using foliar spray (2.62-3.71 mg/kg). The half-lives of cyenopyrafen in leaves for foliar and backward leaf spray was 2.3-3.3 and 5.3-5.9 d, respectively. The residues (10 d) of cyenopyrafen in leaves after backward leaf spray was 1.41-3.02 mg/kg, which was higher than that after foliar spraying (0.25-0.37 mg/kg). It is the main reason for the better efficacy after backward leaf spray. However, the residues (10 d) in strawberry after backward leaf spray and foliar spray was 0.04-0.10 and < 0.01 mg/kg, which were well below the established maximum residue levels of cyenopyrafen in Japan and South Korea for food safety. To further investigate the effects of cyenopyrafen residues after backward leaf spray application on pollinator honeybees, sublethal effects of cyenopyrafen on honeybees were studied. The results indicated a significant inhibition in the detoxification metabolic enzymes of honeybees under continuous exposure of cyenopyrafen (0.54 and 5.4 mg/L) over 8 d. The cyenopyrafen exposure also alters the composition of honeybee gut microbiota, such as increasing the relative abundance of Rhizobiales and decreasing the relative abundance of Acetobacterales. The comprehensive data on cyenopyrafen provide basic theoretical for environmental and ecological risk assessment, while backward leaf spray proved to be effective and safe for strawberry cultivation.

Extraction of volatile organic compounds liberated upon filament extrusion by 3D pen and its comparison with a desktop 3D printer using solid-phase microextraction fiber and Arrow.

Desktop 3D printers that operate by the fused deposition modeling (FDM) mechanism are known to release numerous hazardous volatile organic compounds (VOCs) during printing, including some with potential carcinogenic effects. Operating in a similar manner to FDM 3D printers, 3D pens have gained popularity recently from their ability to allow users to effortlessly draw in the air or create various 3D printed shapes while handling the device like a pen. In contrast to numerous modern 3D printers, 3D pens lack their own ventilation systems and are often used in settings with minimum airflow. Their operation makes users more vulnerable to VOC emissions, as the released VOCs are likely to be in the breathing zone. Consequently, monitoring VOCs released during the use of 3D pens is crucial. In this study, VOCs liberated while extruding acrylonitrile butadiene styrene (ABS) filaments from a 3D pen were measured by solid-phase microextraction (SPME) combined with gas chromatography/mass spectrometry (GC/MS). SPME was investigated using the traditional fiber and Arrow geometries with the DVB/Carbon WR/PDMS sorbent while four different brands of ABS filaments-Amazon Basics, Gizmodork, Mynt 3D, and Novamaker-were used with the 3D pen. Heatmap analysis showed differentiation among these brands based on the liberated VOCs. The nozzle temperature and printing speed were found to affect the number and amount of released VOCs. This study goes a step further and presents for the first time a comparison between 3D pen and a desktop 3D printer based on liberated VOCs. Interestingly, the findings reveal that the 3D pen releases a greater number and amount of VOCs compared to the printer. The amounts of liberated VOCs, as indicated by the corresponding chromatographic peak areas, were found to be 1.4 to 62.6 times higher for the 3D pen compared to the 3D printer when using SPME Arrow.

Discovery of Novel Diphenyl Acrylonitrile Derivatives That Promote Adult Rats' Hippocampal Neurogenesis.

We previously discovered WS-6 as a new antidepressant in correlation to its function of stimulating neurogenesis. Herein, several different scaffolds (stilbene, 1,3-diphenyl 1-propene, 1,3-diphenyl 2-propene, 1,2-diphenyl acrylo-1-nitrile, 1,2-diphenyl acrylo-2-nitrile, 1,3-diphenyl trimethylamine), further varied through substitutions of twelve amide substituents plus the addition of a methylene unit and an inverted amide, were examined to elucidate the SARs for promoting adult rat neurogenesis. Most of the compounds could stimulate proliferation of progenitors, but just a few chemicals possessing a specific structural profile, exemplified by diphenyl acrylonitrile 29b, 32a, and 32b, showed better activity than the clinical drug NSI-189 in promoting newborn cells differentiation into mature neurons. The most potent diphenyl acrylonitrile 32b had an excellent brain AUC to plasma AUC ratio (B/P = 1.6), suggesting its potential for further development as a new lead.

High mechanical property and hydrophilic electrospun poly amidoxime/poly acrylonitrile composite nanofibrous mats for extraction uranium from seawater.

Seawater reserves about 4.5 billion tons of uranium, if properly extracted, could be a sustainable green energy resource for hundreds of years, alternating its limited terrestrial ore and reducing the CO2 emitted from fossil fuels. The current seawater uranium adsorbents suffer neither economically viable nor adsorption efficiency, requiring more development to harvest satisfactorily uranium from seawater. Amidoxime-based fibrous adsorbents are the most promising adsorbents of seawater uranium due to abundant chelating sites. However, they suffer from severe shrinkage and stiffness once they dry, losing porous architecture and mechanical properties. Herein, an economical and scalable two-nozzle electrospinning technology was applied to produce poly amidoxime nanofibers (PAO NFs) supported by Poly acrylonitrile nanofibers (PAN NFs) as composite PAO/PAN nanofibrous mats with high structure stability. These PAO/PAN mats, with rapid wettability and excellent mechanical strength, show promising uranium adsorption capacities of 369.8 mg/g at seawater pH level, much higher than PAO and PAN NFs. The uranium adsorption capacity of the PAO/PAN mat reached 5.16 mg/g after 7 days of circulating (10 ppm uranium) spiked natural seawater. Importantly, the composite mat maintained its fibrous structure after five adsorption-desorption cycles with more than 80 % of its adsorption capacity, confirming its recyclability and stability. Therefore, the composite PAO/PAN mat fulfills the basic requirements for effectively and economically trapping uranium from seawater, which could be a matrix for further development.

In-Gel Cyanoethylation for Pseudouridines Mass Spectrometry Detection of Bacterial Regulatory RNA.

Regulatory RNAs, as well as many RNA families, contain chemically modified nucleotides, including pseudouridines (ψ). To map nucleotide modifications, approaches based on enzymatic digestion of RNA followed by nano liquid chromatography-tandem mass spectrometry (nanoLC-MS/MS) analysis were implemented several years ago. However, detection of ψ by mass spectrometry (MS) is challenging as ψ exhibits the same mass as uridine. Thus, a chemical labeling strategy using acrylonitrile was developed to detect this mass-silent modification. Acrylonitrile reacts specifically to ψ to form 1-cyanoethylpseudouridine (Ceψ), resulting in a mass shift of ψ detectable by MS. Here, a protocol detailing the steps from the purification of RNA by polyacrylamide gel electrophoresis, including in-gel labeling of ψ, to MS data interpretation to map ψ and other modifications is proposed. To demonstrate its efficiency, the protocol was applied to bacterial regulatory RNAs from E. coli: 6S RNA and transfer-messenger RNA (tmRNA, also known as 10Sa RNA). Moreover, ribonuclease P (RNase P) was also mapped using this approach. This method enabled the detection of several ψ at single nucleotide resolution.

Well-Balanced Ambipolar Charge Transport of Diketopyrrolepyrrole-Based Copolymers: Organic Field-Effect Transistors and High-Voltage Logic Applications.

A poly (3,6-bis(thiophen-2-yl)-2,5-bis(2-decyltetradecyl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione-co-(2,3-bis(phenyl)acrylonitrile)) (PDPADPP) copolymer, composed of diketopyrrolopyrrole (DPP) and a cyano (nitrile) group with a vinylene spacer linking two benzene rings, is synthesized via a palladium-catalyzed Suzuki coupling reaction. The electrical performance of PDPADPP in organic field-effect transistors (OFETs) and circuits is investigated. The OFETs based on PDPADPP exhibit typical ambipolar transport characteristics, with the as-cast OFETs demonstrating low field-effect hole and electron mobility values of 0.016 and 0.004 cm2  V-1  s-1 , respectively. However, after thermal annealing at 240 °C, the OFETs exhibit improved transport characteristics with highly balanced ambipolar transport, showing average hole and electron mobility values of 0.065 and 0.116 cm2  V-1  s-1 , respectively. To verify the application of the PDPADPP OFETs in high-voltage logic circuits, compact modeling using the industry-standard small-signal Berkeley short-channel IGFET model (BSIM) is performed, and the logic application characteristics are evaluated. The circuit simulation results demonstrate excellent logic application performance of the PDPADPP-based ambipolar transistor and illustrate that the device annealed at 240 °C exhibits ideal circuit characteristics.

Perioperative exposure to volatile organic compounds in neonates undergoing cardiac surgery.

OBJECTIVE: Volatile organic compounds (VOCs) are used in the sterilization and manufacture of medical equipment. These compounds have high vapor pressures with low water solubility and are emitted as gases from solids or liquids. They can be mutagenic, neurotoxic, genotoxic, and/or carcinogenic. Safe limits of exposure are not known for neonates. This study examined determinants of exposure in newborns undergoing cardiac surgery. METHODS: Twenty metabolites of 16 VOCs (eg, xylene, cyanide, acrolein, acrylonitrile, N, N-dimethylformamide, 1,3-butadiene, styrene, and benzene) were measured as metabolites in daily urine samples collected from 10 neonates undergoing cardiac operations (n = 150 samples). Metabolites were quantified using reversed-phase ultra-high performance liquid chromatography and electrospray ionization tandem mass spectrometry. Repeated measures analysis of covariance was performed for each metabolite to examine associations with use of medical devices. RESULTS: At least 3 metabolites were detected in every sample. The median number of metabolites detected in each sample was 14 (range, 3-15). In a model controlling for other factors, the use of extracorporeal membrane oxygenation was associated with significantly (P ≤ .05) greater metabolite levels of acrolein, acrylonitrile, ethylene oxide, propylene oxide, styrene, and ethylbenzene. Patients breathing ambient air had greater levels of metabolites of acrolein, xylene, N,N-dimethylformamide, methyl isocyanate, cyanide, 1,3-butadiene (all P ≤ .05). CONCLUSIONS: Exposure to volatile organic compounds is pervasive in newborns undergoing cardiac surgery. Sources of exposure likely include medical devices and inhalation from the air in the intensive care unit. The contribution of VOC exposure during cardiac surgery in newborns to adverse outcomes warrants further evaluation.

Red-Shifted Luminescence of Acrylonitrile-Containing Copolymers: A Matter of One Methyl Unit.

Copolymerization provides an effective approach to tune the photophysical properties of non-conventional luminescent polymers (NCLPs). In this study, the controlling of intrinsic emissions of polyacrylonitrile (PAN) copolymers is revealed by a delicate difference of secondary monomers. The introduction of methacrylate comonomers can induce a 70-nm red-shifting in the PL emission of copolymers compared with that of acrylate-containing copolymers. The mechanism of such "copolymerization induced red-shifting" in PAN copolymers is investigated. It is demonstrated that the presence of the α-methyl group in the copolymers can enhance the chain rigidity and through-space conjugation (TSC) of C≡N groups, resulting in the red-shifting of emission.

Novel 3-(pyrazol-4-yl)-2-(1H-indole-3-carbonyl)acrylonitrile derivatives induce intrinsic and extrinsic apoptotic death mediated P53 in HCT116 colon carcinoma.

A novel series of α-cyano indolylchalcones was prepared, and their chemical structures were confirmed based on the different spectral data. Among them, compound 7f was observed to be the most effective bioactive chalcone with distinguished potency and selectivity against colorectal carcinoma (HCT116) with IC50 value (6.76 µg/mL) relative to the positive control (5 FU) (77.15 µg/mL). In a preliminary action study, the acrylonitrile chalcone 7f was found to enhance apoptotic action via different mechanisms like inhibition of some anti-apoptotic protein expression, regulation of some apoptotic proteins, production of caspases, and cell cycle arrest. All mechanisms suggested that compound 7f could act as a professional chemotherapeutic agent. Also, a molecular docking study was achieved on some selected proteins implicated in cancer (Caspase 9, XIAP, P53 mutant Y220C, and MDM2) which showed variable interactions with compound 7f with good Gibbs free energy scores.

Evaluation and modeling of acrylonitrile migration from polypropylene for food packaging.

This study validated an analytical technique using headspace gas chromatography with flame ionization detection to quantify acrylonitrile monomer with a quantification limit of 0.10 ± 0.04 µg kg-1 . Subsequently, the acrylonitrile migration from polypropylene granules was evaluated in food simulants water and ethanol (50% v/v) and at two temperatures (20 ± 1°C and 44 ± 2°C) for up to 6 weeks, representing the service time of a bottle. From the experimental data obtained, pseudo-second-order kinetics were adjusted to represent the acrylonitrile migration into the simulants. For water, equilibrium concentrations of 13.58 and 16.58 µg kg-1 at 20 and 44°C, respectively, were obtained, while for 50% ethanol, 15.07 and 16.40 µg kg-1 were obtained for the same temperatures. The experimental results and the values estimated from the migration kinetics indicate that the maximum acrylonitrile concentration will not exceed the tolerable specific limit established in regulations. PRACTICAL APPLICATION: The migration of compounds such as acrylonitrile can be a drawback resulting in an undesirable reduction in the shelf life of liquid foods packaged in bottles made of materials such as polypropylene. In this paper, acrylonitrile migration kinetics and a methodology are proposed to determine whether the tolerable migration limits are ever reached, which can serve as a tool for producers of this type of packaging of food to predict shelf life.