Creation of rice doubled haploids with low amylose content using in vitro anther culture.

In vitro androgenesis is a unique model for producing homozygous doubled haploid plants. The use of haploid biotechnology accelerates to obtain of doubled haploid plants, which is very important in rice breeding. The purpose of this work is to improve the production of doubled haploids in rice anther culture in vitro and selection of doubled haploid plants with valuable traits. The study the influence of nutrient media on the production of calli and plant regeneration processes in anther culture of 35 rice genotypes was revealed a significant influence of nutrient media on callus production. It was shown that the addition to culture medium phytohormones ratio with high level of cytokinin (5.0 mg/L BAP) and a low level of auxin (0.5 mg/L NAA), supplemented with amino acid composition promotes high production of green regenerated plants (68.75%) compared to albino plants (31.25%). As a result, doubled haploid lines of the glutinous variety Violetta were selected, which characterized by a low amylose content variation (from 1.86 to 2.80%). These doubled haploids are superior to the original variety in some yield traits and represent valuable breeding material.

Changes of crystalline structure and physicochemical properties of Pueraria lobata var. thomsonii starch under water deficit.

Crystal type is an important physicochemical property of starch. However, it is currently unclear whether changes in crystal type affect other properties of starch. This study discovered that water deficit resulted in an increase in small starch granules and transparency in Pueraria lobata var. thomsonii, while causing a decrease in amylose content and swelling power. Additionally, the crystal type of P. Thomsonii starch changed from CB-type to CA-type under water deficit, without significantly altering the short-range ordered structure and chain length distribution of starch. This transformation in crystal type led to peak splitting in the DSC heat flow curve of starch, alterations in gelatinization behavior, and an increase in resistant starch content. These changes in crystalline structure and physicochemical properties of starch granules are considered as adaptive strategies employed by P. Thomsonii to cope with water deficit.

Physicochemical characterization of wheat starch and variation of fatty acid composition in deep-fried dough sticks with different treatments.

The present study investigated the effects of different deep-frying times and temperatures on the amylose content, crystal structure, thermodynamics, and other properties of deep-fried dough sticks. Results showed that the change of amylose content in deep-fried dough sticks during the deep-frying process was positively correlated with time and temperature. Moreover, the deep-frying process of deep-fried dough sticks was accompanied by the formation of starch-lipid complexes that led to the destruction of starch structure. The degreased sample and the oil sample had the same absorption peaks at 2854 and 1746 cm-1, respectively. The melting enthalpy (ΔH) of the starch-lipid complex decreased significantly. In addition, the viscosity of starch reduced as the deep-frying time and temperature increased. Furthermore, it was found that the effect of increasing deep-frying temperature was greater than that of time. PRACTICAL APPLICATION: As a popular deep-fried food, the main component of deep-fried dough sticks is starch. Starch gelatinization, protein denaturation, and interaction among components occurred during deep-frying. At present, there are few studies focusing on the properties of starch in deep-fried dough sticks in the real deep-frying system. Therefore, this study provided a theoretical basis for subsequent research by measuring the effects of different deep-frying conditions on the properties of starch in deep-fried dough sticks.

Developing high resistant starch content rice noodles with superior quality: A method using modified rice flour and psyllium fiber.

The effects of high-resistant starch (RS) content rice flour, psyllium husk powder (PHP), and psyllium powder (PP) on the edible quality and starch digestibility of rice noodles were investigated in this study. High-RS rice noodles showed lower digestibility but poor edible quality. With the addition of PHP and PP, high-RS rice noodles' cooking and texture quality were improved significantly, especially the breakage rates, cooking losses, and chewiness (P < 0.05). Compared to traditional white rice noodle's estimated glycemic index (eGI) of 86.69, the eGI values for 5PHP-RN and 5PHP-2PP-RN were significantly decreased to 66.74 and 65.77, achieving a medium GI status (P < 0.05). This resulted from the high amylose and lipid content in the modified rice flour and psyllium, leading to increase of starch crystallinity. Besides, based on the analysis of Pearson's correlation, it can be found that PHP rich in insoluble dietary fiber (IDF) could improve high-RS noodle cooking and texture quality better, while PP rich in soluble dietary fiber (SDF) can further reduce the RDS content and its starch digestibility. Therefore, utilizing modified rice flour with an appropriate addition of PHP and PP can be considered an effective strategy for producing superior-quality lower glycemic index rice noodles.

Bioaccessibility of Glucosylceramide in Rice Based on the Cooking Condition and Cultivar.

Glucosylceramide (GlcCer), a major sphingolipid in plants, possesses various food functions, including improvement of intestinal impairments. This study evaluated rice cooking conditions and cultivars based on GlcCer levels transferred into the digestive juice using an in vitro digestion model to investigate the factors related to GlcCer availability. GlcCer levels transferred into the digestive juice were higher in rice gruel than in boiled rice. The GlcCer levels in the digestive juice of boiled rice varied based on the rice cultivar, whereas those in rice gruel had no difference. Thus, GlcCer in rice was not fully utilized via digestion. Further, bioaccessibility was related to the amylose ratio and added water content.

The effects of chain-length distributions on starch-related properties in waxy rices.

Normal rice starch consists of amylopectin and amylose, whose relative amounts and chain-length distributions (CLDs) are major determinants of the digestibility and rheology of cooked rice, and are related to metabolic health and consumer preference. Here, the mechanism of how molecular structural features of pure amylopectin (waxy) starches affect starch properties was explored. Following debranching, chain-length distributions of seven waxy varieties were measured using size-exclusion chromatography, and parameterized using biosynthesis-based models, which involve breaking up the chain-length distribution into contributions from five enzyme sets covering overlapping ranges of chain length; structure-property correlations involving the fifth set were found to be statistically significant. Digestibility was measured in vitro, and parameters for the slower and longer digestion phase quantified using non-linear least-squares fitting. The coefficient for the significant correlation involving amylopectin fine structure for the fifth set was -0.903, while the amounts of amylopectin short and long chains were found to dominate breakdown viscosity (correlation coefficients 0.801 and - 0.911, respectively). This provides a methodology for finding or developing healthier starch in terms of lower digestion rate, while also having acceptable palatability. As rice breeders can to some extent control CLDs, this can help the development of waxy rices with improved properties.

Absolute Quantitative Lipidomics Reveals Different Granule-Associated Surface Lipid Roles in the Digestibility and Pasting of Waxy, Normal, and High-Amylose Rice Starches.

Granule-associated surface lipids (GASLs) and internal lipids showed different lipid-amylose relationships, contents, and distributions, suggesting their differing biological origins and functions, among waxy, normal, and high-amylose rice starch. The GASL content mainly depended on the pore size, while internal lipids regulated starch biosynthesis, as indicated by correlations of internal lipids with the chain length distribution of amylopectin and amylose content. Of the 1346 lipids detected, 628, 562, and 408 differentially expressed lipids were observed between normal-waxy, high-amylose-waxy, and normal-high-amylose starch, respectively. After the removal of GASLs, the higher lysophospholipid content induced greater decreases in the peak and breakdown viscosity and swelling power, while the highest digestibility increase was found with the highest triacylglycerol content. Thus, different GASL compositions led to different digestibility, swelling, and pasting outcomes. This study sheds new light on the mechanism of the role of GASLs in the structure and properties of starch, as well as in potential modifications and amyloplast membrane development.

Effect of osmotic pressure and simultaneous heat-moisture phosphorylation treatments on the physicochemical properties of mung bean, water caltrop, and corn starches.

This study aimed to investigate the physicochemical properties of modified starch prepared through the simultaneous heat-moisture and phosphorylation treatment (HMPT) and osmotic pressure treatment (OPT) for water caltrop starch (WCS), mung bean starch (MBS), and amylose-rich corn starch (CS) for different time periods. Furthermore, variations in starch content [amylose and resistant starch (RS)], swelling powder (SP), water solubility index (WSI), crystallinity, thermal properties, gelatinization enthalpy (ΔH), and glycemic index (GI) were examined. This study demonstrates that neither HMPT nor OPT resulted in a significant increase in the resistant starch (RS) content, whereas all samples succeeded in heat-treating at 105 °C for another 10 min exhibited a significant increase in RS content compared to their native counterparts. Moreover, the gelatinization temperatures of the three starches increased (To, Tp, and Tc), whereas their gelatinization enthalpy (ΔH) and pasting viscosity decreased. In particular, the GI of all three modified starches subjected to HMPT or OPT showed a decreasing trend with modification time, with OPT exhibiting the best effect. Therefore, appropriate modification through HMPT or OPT is a viable approach to develop MBS, WCS, and CS as processed foods with low GI requirements, which exceptionally may be suitable for canned foods, noodles, and bakery products.

Effects of Lactobacillus plantarum fermentation on the structure, physicochemical properties, and digestibility of foxtail millet starches.

This study investigated the effects of Lactobacillus plantarum fermentation on the structural, physicochemical, and digestive properties of foxtail millet starches. The fermented starch granules formed a structure with honeycomb-like dents, uneven pores, and reduced particle size. As the fermentation time extended, the amylose content of waxy (0.88 %) and non-waxy (33.71 %) foxtail millet starches decreased to the minimum value at 24 h (0.59 % and 29.19 %, respectively), and then increased to 0.85 % and 31.87 % at 72 h, respectively. Both native and fermented foxtail millet starches exhibited an A-type crystal structure. Compared with native samples, the fermented samples performed enhanced proportion of short-branched chain, crystallinity, and short-range ordered degree. After fermentation for 24 h, the solubility, adsorption capacity, and pasting viscosity of foxtail millet starches improved, whereas the swelling power, pasting temperature, breakdown, setback, and degree of retrogradation reduced. Additionally, fermentation increased the transition temperatures, enthalpy, and digestibility. Overall, Lactobacillus plantarum fermentation is considered a competent choice to regulate the characteristics of foxtail millet starch.

Apparent amylose content positively influences the quality of extruded fortified rice kernels.

The present research studies the impact of apparent amylose content (AAC) on the quality of fortified rice kernels (FRK), a health food designed to combat iron deficiency anemia by fortifying with iron, folic acid, and vitamin B12. Five FRK formulations with varying AAC (0.46-23.89 %) were prepared, and AAC influence on the extruder-system parameter and physicochemical, cooking, and textural properties of FRK was investigated. The torque, die-pressure, length, redness, and cooking time increased with an increase in AAC and were in the range of 12.55-22.81 Nm, 58.31-88.96 bar, 4.58-5.09 mm, 0.35-1.15, and 6.1-11.2 min, respectively. The other parameters, such as the breadth, whiteness index, and cooking loss decreased with an increase in AAC. Except for cohesiveness, all other textural properties of cooked FRK increased with an increase in AAC. These correlations of the FRK properties with AAC were confirmed through multivariate analysis. SEM, XRD, FTIR, and rheology supported the observed AAC trends in FRK properties. SEM showed a reduction in pores and cracks with an increase in AAC. The XRD and FTIR showed an increase in crystallinity with an increase in AAC due to better gelatinization leading to rapid retrogradation. This leads to better physical, cooking, and textural properties of FRK.

Amylopectin chain length distributions and amylose content are determinants of viscoelasticity and digestibility differences in mung bean starch and proso millet starch.

This study aimed to reveal the underlying mechanisms of the differences in viscoelasticity and digestibility between mung bean starch (MBS) and proso millet starch (PMS) from the viewpoint of starch fine molecular structure. The contents of amylopectin B2 chains (14.94-15.09 %), amylopectin B3 chains (14.48-15.07 %) and amylose long chains (183.55-198.84) in MBS were significantly higher than PMS (10.45-10.76 %, 12.48-14.07 % and 70.59-88.03, respectively). MBS with higher amylose content (AC, 28.45-31.80 %) not only exhibited a lower weight-average molar mass (91,750.65-128,120.44 kDa) and R1047/1022 (1.1520-1.1904), but also was significantly lower than PMS in relative crystallinity (15.22-23.18 %, p < 0.05). MBS displayed a higher storage modulus (G') and loss modulus (G'') than PMS. Although only MBS-1 showed two distinct and discontinuous phases, MBS exhibited a higher resistant starch (RS) content than PMS (31.63-39.23 %), with MBS-3 having the highest RS content (56.15 %). Correlation analysis suggested that the amylopectin chain length distributions and AC played an important role in affecting the crystal structure, viscoelastic properties and in vitro starch digestibility of MBS and PMS. These results will provide a theoretical and scientific basis for the development of starch science and industrial production of low glycemic index starchy food.

Delayed sowing and its ramifications: biophysical, yield and quality analysis of wheat cultivars in the northwest Indo-Gangetic plains.

BACKGROUND: The continuous cultivation of rice-wheat in the same field is a key element of double-cropping systems in the Indo-Gangetic plains. Yields of such cropping systems are increasingly challenged as climate change drives increases in temperature, terminal stress and uneven rainfall, delaying rice harvesting and subsequently delaying sowing of wheat. In this paper, we evaluate the optimum sowing dates to achieve high grain yield and quality of wheat cultivars in northwest India. Three cultivars of wheat, HD-2967, HD-3086 and PBW-723, were sown on three different dates at the research farm of ICAR-IARI, New Delhi, to generate different weather conditions at different phenological stages. Different biophysical attributes, photosynthetic rate, stomatal conductance and transpiration rate, were measured at different phenological stages. Yield and grain quality parameters such as protein, starch, amylopectin, amylose and gluten were measured in different cultivars sown on different dates. RESULTS: Biophysical parameters were found to be higher in timely sown crops followed by late-sown and very late-sown crops. Further, the different sowing dates had a significant (P < 0.05) impact on the grain quality parameters such as protein, starch, amylopectin, amylose and gluten content. Percentage increases in the value of starch and amylose content under timely sown were ~7% and 11.6%, ~5% and 8.4%, compared to the very late-sown treatment. In contrast, protein and amylopectin contents were found to increase by ~9.7% and 7.5%, ~13.8% and 16.6% under very late-sown treatment. CONCLUSION: High-temperature stress during the grain-filling periods significantly decreased the grain yield. Reduction in the grain yield was associated with a reduction in starch and amylose content in the grains. The protein content in the grains is less affected by terminal heat stress. Cultivar HD-3086 had higher growth, yield as well as quality parameters, compared to HD-2967 and PBW-723 in all treatments, hence could be adopted by farmers in northwest India. © 2024 Society of Chemical Industry.

Effect of different starch on masking fishy odor compounds.

Starch is a common ingredient to improve gel property of freshwater fish surimi, but the function of natural starch to mask fishy odor compounds in surimi products has not been investigated systematacially. Therefore, this study aimed to determine which natural starch could effectively mask fishy odor compounds and clarify their interaction by GC-MS, FT-IR spectroscopy, raman spectroscopy, X-ray diffraction, scanning electron microscopy and 13C nuclear magnetic resonance. The results showed that when the concentration, crystal type, amylose content, and dispersion degree of starch was 1 %, type C, 48 % (w/v), and 200 mesh with 0.88 span, the starch had the strongest masking effect on typical fishy odor compounds, namely hexanal, 1-Octen-3-ol, (E,E)-2,4-Heptadienal and (E)-2-Octenal. It indicated that complexation and hydrogen bonding both occurred between the fishy odor compounds and starch.

Characterization of starches isolated from Mexican pulse crops: Structural, physicochemical, and rheological properties.

This work aimed to characterize and compare the physicochemical properties of four pulse starches: bean, chickpea, lentil, and pea. Chemical proximate analysis, elemental composition, morphological grain characterization, crystalline structure, thermal analysis, FTIR analysis, and pasting properties were conducted. The proximate analysis shows that these starches have low fat, mineral, and protein content but high amylose values ranging from 29 to 36 % determined by colorimetry. Despite the high amylose content, the starches did not exhibit the typical behavior of an amylose-rich starch, with high peak viscosity and low breakdown and setback. It was found that this behavior was likely due to the large granule size of the ellipsoidal, spherical, and kidney-shaped granules and the high content of some minerals such as Na, Mg, K, Fe, Mn, P, and Si. The study also found that all pulse starches simultaneously contain monoclinic and hexagonal crystals, making them C-type starches. The findings were verified through the Rietveld analyses of X-ray diffraction patterns and differential scanning calorimetry, in which bimodal endothermic peaks evidenced both types of crystals being gelatinized.

Effect of starch and peanut oil on physicochemical and gel properties of myofibrillar protein: Amylose content and addition form.

Starch and peanut oil (PO) were widely used to improve the gel properties of surimi, however, the impact mechanism of addition forms on the denaturation and aggregation behavior of myofibrillar protein (MP) is not clear. Therefore, the effect of starch, PO, starch/PO mixture, and starch-based emulsion on the physicochemical and gel properties of MP was investigated. The results showed that amylose could accelerate the aggregation of MP, while amylopectin was conducive to the improvement of gel properties. The addition of PO, starch/PO mixture, or starch-based emulsion increased the turbidity, solubility, sulfhydryl content of MP, and improved the gel strength, whiteness, and texture of MP gel. However, compared with starch/PO mixture group, the gel strength of MP with waxy, normal and high amylose corn starch-based emulsion increased by 22.68 %, 10.27 %, and 32.89 %, respectively. The MP containing emulsion had higher storage modulus than MP with starch/PO mixture under the same amylose content. CLSM results indicated that the oil droplets aggregated in PO or starch/PO mixture group, while emulsified oil droplets filled the protein gel network more homogeneously. Therefore, the addition of starch and PO in the form of emulsion could effectively play the filling role to improve the gel properties of MP.

Retrogradation inhibition of starches in staple foods with maltotetraose-forming amylase.

To effectively inhibit the retrogradation of staple foods, the effects of maltotetraose-forming amylase(G4-amylase) on the short and long-term retrogradation of different staple starches such as rice starch (RS), wheat starch (WS), potato starch (PS) were studied. The results indicated that G4-amylase decreased the content of amylose. Amylose contents (21.09%) of WSG4 were higher than that (14.82%) of RSG4 and (13.13%) of PSG4. WS had the most obvious change in the chain length distribution of amylopectin. A chains decreased by 18.99% and the B1 chains decreased by 12.08% after G4-amylase treatment. Compared to RS (662 cP) and WS (693 cP), the setback viscosity of RSG4 (338 cP) and WSG4 (385 cP) decreased. Compared to RS (0.41), WS (0.45), and PS (0.51), the long-term retrogradation rate of RSG4 (0.33), WSG4 (0.31), and PSG4 (0.38) significantly reduced. It indicated that G4-amylase significantly inhibited the long-term retrogradation of WS, followed by RS and PS.

Fast quantitative analysis and chemical visualization of amylopectin and amylose in sweet potatoes via merging 1D spectra and 2D image.

The quantitative analysis and spatial chemical visualization of amylopectin and amylose in different varieties of sweet potatoes were studied by merging spectral and image information. Three-dimensional (3D) hyperspectral images carrying 1D spectra and 2D images of hundreds of the samples (amylopectin, n = 644; amylose, n = 665) in near-infrared (NIR) range of 950-1650 nm (426 wavelengths) were acquired. The NIR spectra were mined to correlate with the values of the two indexes using a linear algorithm, generating a best performance with correlation coefficients and root mean square error of prediction (rP and RMSEP) of 0.983 and 0.847 g/100 mg for amylopectin, and 0.975 and 0.500 g/100 mg for amylose, respectively. Then, 14 % of the wavelengths (60 for amylopectin, 61 for amylopectin) were selected to simplify the prediction with rP and RMSEP of 0.970 and 1.103 g/100 mg for amylopectin, and 0.952 and 0.684 g/100 mg for amylose, respectively, comparable to those of full-wavelength models. By transferring the simplified model to original images, the color chemical maps were created and the differences of the two indexes in spatial distribution were visualized. The integration of NIR spectra and 2D image could be used for the more comprehensive evaluation of amylopectin and amylose concentrations in sweet potatoes.

Differences in rice component distribution across layers and their relationship with taste.

BACKGROUND: Rice taste is closely associated with endosperm composition, which varies among different rice layers. Although clarifying the relationship between this difference and nutritional taste can guide rice breeding and cultivation practices, research on this topic is limited. RESULTS: Here, typical rice varieties having excellent and poor taste characteristics were selected to analyze the distribution characteristics and differences of their components. The varieties with excellent taste exhibited lower apparent amylose content (AAC) and protein content (PC), lesser short-chain (Fa) and long-chain (Fb3 ) amylopectin (AP) and more medium-chain (Fb1+2 ) AP, higher long-to-short chain ratio (Fa:Fb3 ), and higher nitrogen (N), magnesium (Mg) and calcium (Ca) content in layer 1 (L1) than the varieties with poor taste. Layer 2 (L2) played a key role in AAC and PC regulation in the varieties with excellent taste by reducing AAC and appropriately increasing PC, consequently improving rice taste. AP structure in layer 3 (L3) substantially affected the taste of the two types of varieties. The mineral content was the highest in L1, and increased potassium (K), Ca, and Mg content improved taste in all varieties. CONCLUSION: AAC in each layer contributes to rice taste. PC and minerals primarily act on L1 and L2, whereas AP acts on L2 and L3. Therefore, the endosperm formation process should be exploited for improving rice taste. Furthermore, key resources and cultivation should be identified and regulated, respectively, to improve rice taste. © 2023 Society of Chemical Industry.

"Structure-function" analysis using starches isolated from Lycoris chinensis bulbs of different developmental stages.

In this study, Lycoris chinensis bulbs of four developmental stages were compared for starch characteristics. Based on correlation analysis and hierarchical cluster analysis, the relationships among 36 traits were discussed. Compared to commonly consumed starches, L. chinensis starch had higher amylose content (33.4-43.2 %) and weight-average molar mass (36410-82,781 kDa), lower gelatinization temperature (61.8-68.1 °C), gel hardness (19.0-39.5 g) and viscosities. Among developmental stages, starches varied significantly in characteristics. As compared to juvenile stage (S1), mature bulbs (S4) had higher amylose content, lower gelatinization temperature, weight-average molar mass and degree of polymorphism. Correlation analysis revealed that the molecular weight-related traits had significantly positive correlations to gelatinization temperature (Tp, p < 0.05), positive but weak correlations to traits of particle size distribution, significantly negative correlations to AAC and many parameters of viscosity properties (p < 0.05). Based on the results of correlation analysis and hierarchical cluster analysis, the 36 traits of starch characteristics were proposed to be divided into three groups: particle size-related traits, molecular weight-related traits and AAC-related traits. The information presented in the current study are useful for future studies on starches of Lycoris and other bulb species, and instructive for future studies in investigating the "Structure-Function" relationship in starch.

Enzymatic Modification of Starch Using Recombinant Genes from Sorghum in Escherichia coli: Insights and Potential Applications.

SBEIIb (Sobic.004G163700), SSSIIa (Sobic.010G093400), and GBSSI (Sobic.010G022600) genes that regulate starch synthesis in sorghum endosperm were transferred into Escherichia coli by transgenic technology. SBEIIb, SSSIIa, and GBSSI enzymes were separated and purified through a Ni column and analyzed by electrophoresis with molecular weights and activities of 91.57 84.57, and 66.89 kDa and 551 and 700 and 587 U/µL, respectively. Furthermore, they were applied to starch modification, yielding interesting findings: the A chain content increased from 25.79 to 89.55% for SBEIIb-treated waxy starch, while SSSIIa extended the A chain to form DPs of the B chain, with A chain content decreasing from 89.55 to 37.01%, whereas GBSSI was explicitly involved in the synthesis of B1 chain, with its content increasing from 9.59 to 48.45%. Modified starch was obtained, which could be accurately applied in various industries. For instance, we prepared a sample (containing 89.6% A chain content) with excellent antiaging and antidigestion properties through SBEIIb modification. Moreover, higher RS3 (34.25%) and SDS contents (15.75%) of starch were obtained through the joint modification of SBEIIb and SSSIIa. These findings provide valuable insights for developing sorghum starch synthesis-related enzymes and offer opportunities for improving starch properties through enzymatic approaches.