A review of functions and mechanisms of clay soil conditioners and catalysts in thermal remediation compared to emerging photo-thermal catalysis.

High temperatures and providing sufficient time for the thermal desorption of persistent organic pollutants (POPs) from contaminated clay soils can lead to intensive energy consumption. Therefore, this article provides a critical review of the potential additives which can improve soil texture and increase the volatility of POPs, and then discusses their enhanced mechanisms for contributing to a green economy. Ca-based additives have been used to reduce plasticity of bentonite clay, absorb water and replenish system heat. In contrast, non-Ca-based additives have been used to decrease the plasticity of kaolin clay. The soil structure and soil plasticity can be changed through cation exchange and flocculation processes. The transition metal oxides and alkali metal oxides can be applied to catalyze and oxidize polycyclic aromatic hydrocarbons, petroleum and emerging contaminants. In this system, reactive oxygen species (•O2- and •OH) are generated from thermal excitation without strong chemical oxidants. Moreover, multiple active ingredients in recycled solid wastes can be controlled to reduce soil plasticity and enhance thermal catalysis. Alternatively, the alkali, nano zero-valent iron and nano-TiN can catalyze hydrodechlorination of POPs under reductive conditions. Especially, photo and photo-thermal catalysis are discussed to accelerate replacement of fossil fuels by renewable energy in thermal remediation.

Role of urea in the retention of DON in soil by clay minerals: Analysis based upon molecular weight.

As a widely used fertilizer, urea significantly promotes the leaching of dissolved organic nitrogen (DON) in soils and aggravates nitrogen contamination in groundwater. Clay minerals are considered the most important factor in retaining DON. However, the effect of urea on the retention of DON with different molecular weights by clay minerals is unknown. In this study, the retention of both low-molecular weight DON (LMWD) and high-molecular weight DON (HMWD) by clay minerals in the presence of urea was investigated. For this purpose, batch adsorption and soil column leaching experiments, characterization analysis (Fourier transform infrared spectroscopy X-ray diffraction, and X-ray photoelectron spectroscopy), and molecular dynamics simulations were carried out. Urea had a positive effect on the adsorption of LMWD, whereas a competitive effect existed for the adsorption of HMWD. The dominant interactions among DON, urea, and clay minerals included H-bonding, ligand exchange, and cation exchange. The urea was preferentially adsorbed on clay minerals and formed a complex, which provided more adsorption sites to LMWD and only a few to HMWD. The presence of urea increased the retention of LMWD and decreased the retention of HMWD in clay minerals. The retention capacity of LMWD increased by 6.9%-12.8%, while that of HMWD decreased by 6.7%-53.1%. These findings suggest that LMWD tended to be trapped in soils, while HMWD was prone to be leached into groundwater, which can be used to evaluate the leaching of DON from soil to groundwater.

Simple preparation of nitenpyram-intercalated clay nanosheets with reduced leaching risk and improved safety to insect pollinators.

Neonicotinoids, highly toxic to insects, are among the world's most used insecticides. However, their harmful effects on pollinators like honeybees and potential to contaminate water bodies have drawn significant criticism. Herein, a nanopesticide, NTP@LDH, was developed by intercalating the model neonicotinoid insecticide nitenpyram (NTP) within layered double hydroxide (LDH) materials using a simple one-pot method. The NTP@LDH showed a nano-sized sheet structure, with an average particle size of 206.2 nm and a loading capacity of 14.6 %. The release rate of NTP@LDH under acidic conditions was higher than that under alkaline or neutral conditions. The photodegradation capacity and insecticidal activity of NTP were unaffected by intercalation in LDH. Importantly, NTP@LDH could significantly enhance the foliar adhesive properties of NTP, retard its leaching through the soil, and improve its safety for honeybees. Moreover, LDH was safe for crops and can improve their growth. This work provides a promising strategy with a simple procedure that could reduce leaching risks of neonicotinoids while concurrently enhancing their safety to pollinating creatures.

Characteristics of soil salinity and water-salt transport in the vadose zone of salt-impacted regions with variable permeability.

Soil salinization poses a significant ecological challenge, emerging as a critical constraint to agricultural development in the arid and semi-arid regions of China, especially in southern Xinjiang. In particular, Yuepuhu County, situated in Kashgar, faces a distinctive issue. Impermeable thin clay layers within the vadose zone impede year-round leaching of salts, significantly impacting the growth of cotton. Through a combination of indoor testing, experiments, and statistical analyses, this study elucidated the varying permeability of soil layers at different depths and explored the forms and accumulation characteristics of soil salts in Yuepuhu County. It unveiled patterns of water and salt movement in soils with variable permeability layers, identifying key influencing factors. The research also proposed an irrigation regime suitable for cultivating vadose zone soils in the local context. The findings revealed a progression of increasing soil complexity and decreasing burial depth of clay layers from northwest to southeast, aligned with the direction of groundwater flow. With increasing depth, a noticeable reduction in soil saturated hydraulic conductivity was observed, indicating significant variability in permeability. Predominantly chloride-sulfate type saline soils in Yuepuhu County contained potassium (K+) and sodium (Na+) as the main cations in surface soils. Salinity strongly correlated with calcium (Ca2+) and magnesium (Mg2+). Chloride (Cl-), sulfate (SO42-), K+, Na+, and bicarbonate (HCO3-) reflected the degree of soil salinization in Yuepuhu County. The clay interlayers in variable permeability zones significantly impeded water and salt movement in the vadose zone. Moving from west to east, thicker and shallower clay interlayers hindered downward water movement, increasing the difficulty of salt leaching. Additionally, the irrigation regime influenced water and salt movement in the vadose zone. Under the same soil structure, flood irrigation with a higher water flux resulted in more significant salt leaching, and lower total dissolved solids (TDS) in irrigation water were more favorable for effective salt leaching. Collectively, our findings provided a theoretical foundation for improving and managing local saline soils, as well as guiding the implementation of rational agricultural irrigation practices.

Sandy loam soil maintains better physicochemical parameters and more abundant beneficial microbiomes than clay soil in Stevia rebaudiana cultivation.

Depending on the texture of soil, different physicochemical and microbiological parameters are characterized, and these characteristics are influenced by crop cultivation. Stevia, a popular zero-calorie sweetener crop, is widely cultivated around the world on various soil textures. Sandy loam and clay soil show great differences in physicochemical and biological parameters and are often used for Stevia cultivation. To understand the effects of Stevia cultivation on soil physicochemical and biological features, we investigated the changes of physicochemical and microbiological parameters in sandy loam and clay soil following Stevia cultivation. This study was carried out through different physiological and biochemical assays and microbiomic analysis. The results indicated that the sandy loam soil had significantly lower pH and higher nutrient content in the rhizosphere and bulk soils after the Stevia cultivation. The sandy loam soil maintained higher bacterial diversity and richness than the clay soil after Stevia harvest. Beneficial bacteria such as Dongia, SWB02, Chryseolinea, Bryobacter and Devosia were enriched in the sandy loam soil; however, bacteria such as RB41, Haliangium and Ramlibacter, which are unfavorable for nutrient accumulation, predominated in clay soil. Redundancy analysis indicated that the variation in the composition of bacterial community was mainly driven by soil pH, organic matter, total nitrogen, available phosphorus, and microbial biomass phosphorus. This study provides a deeper understanding of physicochemical and microbiological changes in different soil textures after Stevia cultivation and guidance on fertilizer management for Stevia rotational cultivation.

Specific ion effects on the soil shear strength and clay surface properties of collapsing wall in Benggang.

Benggangs are a special type of soil erosion in the hilly granite regions of the tropical and subtropical areas of Southern China. They cause severe soil and water loss, which can severely deteriorate soil quality and threat to the local ecological environment. Soils (red soil, sandy soil and detritus soil) were collected from collapsing wall of a typical Benggang in Changting County of Fujian Province, and their physicochemical and mineralogical properties were analyzed. Five different monovalent cations were used to saturate the soil samples to examine the specific ion effects on the shear strength and clay surface properties. Red soil had a higher clay content, plastic limit, liquid limit and shear strength than sandy soil and detritus soil. The studied soils mainly consisted of kaolinite, hydroxy-interlayer vermiculite, illite and gibbsite clay minerals. The soils saturated with K+, NH4 +and Cs+ had greater cohesion than the Li+- and Na+-saturated soils, e.g., the cohesion of the red soil saturated with Li+, K+, NH4 + and Cs+ cations were 1.05, 1.23, 1.45 and 1.20 times larger than that of the Na+-saturated soil, respectively. While the internal friction angle was slightly different, which indicated that different monovalent cations affected the shear strength differently. K+-, NH4 +- and Cs+-saturated clay particles had higher zeta potentials and thinner shear plane thicknesses than Li+- and Na+-saturated clay particles and showed strong specific ion effects on the clay surface properties. The changes in clay surface properties strongly affected the soil mechanical properties. Soils saturated with K+, NH4 + and Cs+ could increase the shear strength, and then increase the stability of the collapsing wall, thus might decrease the erosion intensity of Benggang. The results provide a scientific basis for the interpretation of and practical treatment of Benggang.

Insights into the differential removal of various red tide organisms using modified clay: Influence of biocellular properties and mechanical interactions.

In recent years, red tides have increased worldwide in frequency, intensity, involving a higher number of causative species during the events. As the most commonly used method for control of red tides, modified clay (MC) was found to have differential ability to remove various red tide species. However, the underlying mechanisms have not yet been completely elucidated. In this study, the use of MC to remove three typical disaster-causing species, Aureococcus anophagefferens, Prorocentrum donghaiense and Heterosigma akashiwo, was investigated, and differential removal of these species was probed with insights into their biocellular properties and mechanical interactions. The results showed that removal efficiencies of the three species by MC decreased in the order P. donghaiense > A. anophagefferens > H. akashiwo, while the sedimentation rates decreased in the order H. akashiwo > P. donghaiense > A. anophagefferens. Analyses of the cell surface properties and redundancy analysis (RDA) revealed that the highest surface zeta potential of -5.32±0.39 mV made P. donghaiense the most easily removed species; the smallest cell size of 3.30±0.03 µm facilitated the removal of A. anophagefferens; and the highest hydrophobicity with a H2O surface contact angle of 98.50±4.31° made the removal of H. akashiwo difficult. X-ray photoelectron spectroscopy (XPS) data indicated that the electronegativity of P. donghaiense was caused by carboxyl groups and phosphodiester groups, and the hydrophobicity of H. akashiwo was associated with a high C-(C, H) content on the cell surface. According to the extended Derjaguin, Landau, Verwey, and Overbeek (ex-DLVO) theory calculation, differences in the interaction energies between MC and the three red tide species effectively explained their different sedimentation rates. In addition, the degree of oxidative damage caused by MC to the three red tide species differed, which also affected the removal of red tide organisms.

Advances in agar-based composites: A comprehensive review.

This review article explores the developments and applications in agar-based composites (ABCs), emphasizing various constituents such as metals, clay/ceramic, graphene, and polymers across diversified fields like wastewater treatment, drug delivery, food packaging, the energy sector, biomedical engineering, bioplastics, agriculture, and cosmetics. The focus is on agar as a sustainable and versatile biodegradable polysaccharide, highlighting research that has advanced the technology of ABCs. A bibliometric analysis is conducted using the Web of Science database, covering publications from January 2020 to March 2024, processed through VOSviewer Software Version 1.6.2. This analysis assesses evolving trends and scopes in the literature, visualizing co-words and themes that underscore the growing importance and potential of ABCs in various applications. This review paper contributes by showcasing the existing state-of-the-art knowledge and motivating further development in this promising field.

Halloysite functionalized with dendritic moiety containing vitamin B1 hydrochloride as a bio-based catalyst for the synthesis of 5-hydroxymthylfurfural.

Using halloysite clay and vitamin B1 hydrochloride, a novel acidic halloysite-dendrimer catalytic composite has been developed for conversion of fructose to 5-hydroxymthylfurfural. To grow the dendritic moiety on halloysite, it was first functionalized and then reacted with melamine, epichlorohydrin and vitamin B1 hydrochloride respectively. Then, the resulting composite was treated with ZnCl2 to furnish Lewis acid sites. Use of vitamin B1 as the cationic moiety of ionic liquid obviated use of toxic chemicals and resulted in more environmentally friendly composite. Similarly, dendritic moiety of generation 2 was also grafted on halloysite and the activity of both catalysts for conversion of fructose to 5-hydroxymthylfurfural was investigated to disclose the role of dendrimer generation. For the best catalytic composite, the reaction variables were optimized via RSM and it was revealed that use of 0.035 g catalyst per 0.1 g fructose at 95 °C furnished HMF in 96% yield in 105 min. Turnover numbers (TONs) and frequencies (TOFs) were estimated to be 10,130 and 5788 h-1, respectively. Kinetic studies also underlined that Ea was 22.85 kJ/mol. The thermodynamic parameters of Δ H ≠ , Δ S ≠ and Δ G ≠ , were calculated to be 23 kJ/mol, - 129.2 J/mol and 72.14 kJ/mol, respectively. Notably, the catalyst exhibited good recyclability and hot filtration approved heterogeneous nature of catalysis.

Study on the influence of different water and black shale content on the resistivity of loess.

Soil degradation, characterized by the deterioration of soil physical and chemical properties, nutrient loss, and an increase in toxic substances, is a key ecological concern in mining activities. This study explores the use of waste black shale from mining development as an additive to loess to enhance soil properties for reclamation in mining areas. The research includes resistivity and organic carbon content tests on modified reclaimed loess with varying black shale and water contents. Additionally, the electrical properties of these modified soils are investigated across different AC frequencies. The results highlight the significance of soil plasticity and a 1.5% black shale content in influencing reclaimed loess's electrical properties. Moisture content and black shale influence changes in soil conductive paths and resistivity. The abundance of clay minerals in black shale plays a crucial role in altering soil electrical resistivity due to the adsorption of cations in water and the directional transport under an electric field. Considering soil's three-phase composition and diffuse bilayer structure, the study elucidates the mechanism behind changes in the electrical properties of improved reclaimed loess, accounting for water and black shale content. This research demonstrates the feasibility of using black shale as a soil additive and emphasizes the non-destructive assessment potential of electrical resistivity test (ERT) measurements for modified reclaimed soils.

Adsorption and ion exchange of toxic metals by Brazilian clays: clay selection and studies of equilibrium, thermodynamics, and binary ion exchange modeling.

In this study, four Brazilian clays (Bofe, Verde-lodo, commercial Fluidgel, and expanded commercial vermiculite) were evaluated for their adsorptive capacity and removal percentage in relation to different toxic metals (Ni2+, Cd2+, Zn2+, and Cu2+). The best results were obtained by expanded vermiculite, with cadmium removal reaching values of 95%. The most promising clay was modified by the sodification process, and the metal cadmium was used to evaluate the ion exchange process. The clays expanded vermiculite (EV) and VNa-sodified vermiculite were evaluated by equilibrium study at 25, 35, and 45 °C. At 25 °C, EV obtained a maximum adsorption capacity of 0.368 mmol/g and sodified vermiculite 0.480 mmol/g, which represents an improvement of 30.4% in modified clay capacity. At 45 °C, the sodified vermiculite reached 0.970 mmol/g adsorption capacity. The Langmuir, Redlich-Peterson Freundlich, and Dubinin-Raduskevich models were adjusted to the results. Langmuir provided the best fit among the models. The thermodynamic quantities (ΔS, ΔH, and ΔG) demonstrated that the process is spontaneous and endothermic and the metal is captured by physisorption and chemisorption in the studied temperature range. For the ion exchange equilibrium, the binary Langmuir and binary Langmuir-Freundlich models were adjusted to the expanded vermiculite and sodified vermiculite isotherms, respectively. Both models were predictive. Thermal analysis indicated good heat resistance even after material modification. The apparent and real densities demonstrated that after each treatment or contamination, the clayey material undergoes contraction in its structure. An improved efficiency of the adsorbent was found after sodification.

Interfacial interactions of nanoscale zero-valent iron particles with clay minerals in the aquatic environments: Experimental and theoretical calculation study.

The environmental transport and fate of nanoscale zero-valent iron particles (nZVI) in soil and groundwater can be altered by their hetero-aggregation with clay mineral particles (CMP). This study examines the interactions between bare or carboxymethyl cellulose (CMC)-coated nZVI with typical CMP, specifically kaolinite and montmorillonite. Methods include co-settling experiments, aggregation kinetic studies, electron microscopy, Derjaguin-Landau-Verwey-Overbeek (DLVO) and extended DLVO (EDLVO) energy analysis, and density functional theory calculations, focusing on the pH dependency of these interactions. The EDLVO theory effectively described the interactions between nZVI and CMP in aquatic environments. Under acidic conditions (pH 3.5), the interfacial interaction between bare nZVI and kaolinite is regulated by van der Waals forces, while complexation, van der Waals forces, and electrostatic attraction govern the interaction of bare nZVI with montmorillonite, primarily depositing on the SiO face. In contrast, the positively charged AlO face and edge of CMP are the main deposition sites for CMC-coated nZVI through hydrogen bonding, van der Waals forces, and electrostatic attraction. At neutral (pH 6.5) and alkaline (pH 9.5) conditions, both bare and CMC-coated nZVI predominantly attach to the AlO face and edge, facilitated by complexation or hydrogen bonding, alongside van der Waals forces. The attachment of CMC-coated nZVI to CMP surfaces shows reversible aggregation or deposition due to the steric repulsion from the CMC coating. These findings hold significant implications for the environmental applications and risk of nZVI.

Halloysite-based inorganic-organic hybrid coatings for durable flame retardant, hydrophobic and antibacterial properties of cotton fabrics.

Developing durable protective cotton fabrics (CF) against potential environmental dangers such as fire hazards and bacterial growth remains an imperative but tough challenge. In this study, flame retardant, antibacterial and hydrophobic CF were successfully prepared via two-step coating. The inner coating entailed polyelectrolyte complexes consisting of polyethyleneimine and ammonium polyphosphate with the goal of enhancing the flame retardancy of CF. Halloysite nanotubes (HNTs), a kind of tubular silicate mineral, were creatively modified and introduced to multifunctional coatings to improve flame retardant and antibacterial properties of CF. N-halamine modified HNTs (HNTs-EA-Cl) and polydimethylsiloxane were applied as the outer coating to endow CF with antibacterial and hydrophobic properties and further improve the flame retardancy of CF. After halloysite-based inorganic-organic hybrid coatings, the limiting oxygen index of the treated samples (PAHP-CF) was over 28 %, and the release of heat and smoke was significantly inhibited. PAHP-CF could inactivate 100 % E. coli and S. aureus within 2 h. More importantly, PAHP-CF showed excellent hydrophobicity with a water contact angle of 148° and exhibited great prevention of bacterial adhesion. PAHP-CF exhibited excellent washing durability undergoing 5 washing cycles. This study promotes the development of multifunctional coatings and offers a new way to manufacture multifunctional cotton fabrics.

Synthesis, characterization and biocompatibility of hybrid hydrogels based on alginate, κ-carrageenan, and chitosan filled with montmorillonite clay.

New hybrid hydrogel composites based on a mixture of natural polysaccharides (sodium alginate, κ-carrageenan, and chitosan) filled with the clay mineral of natural origin, montmorillonite (MMT), were studied. The structure of intercalated/flocculated MMT distribution in the interpenetrating network of polysaccharide matrix was characterized using FTIR, X-ray diffraction, and SEM techniques. Swelling kinetics was investigated using the weight analysis, whereas the phase transition of water in the composition of hybrid hydrogels, by DSC method. Their biosafety was estimated using the Nelyubov method, germination test on cress (L. sativum) seeds, and metabolic fingerprinting of microbial communities and dehydrogenase assay. The obtained results indicated promising water-retaining properties of the synthesized materials. The hydrogels had a good sorption affinity for cadmium (Cd) ions confining bioavailability of the selected toxic heavy metal. They were safe for soil microorganisms and did not generate metabolic stress for them. Moreover, they did not reduce the viability of pea seeds. Thus, the development of biosafe hybrid hydrogel composites with a comprehensive, good effect on the environment could be considered as successful.

Resourceful exploitation of sedimentary clay: Designing a dual-chambered borosilicate glass reactor system for the efficient treatment of malachite green and phenol through SCRT adsorption and 5%Fe@SRCT catalysis via CWPO, with evaluation of seed germination and fish survival.

This study presents an innovative double-walled borosilicate glass reactor system for the efficient treatment of liquid and gaseous wastewater. This reactor system allows precise temperature control, continuous pH monitoring, and controlled dosing of reagents to optimize reaction conditions. Detailed characterization was carried out by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), BET (specific surface area) analysis, point of zero charge (PZC), and scanning electron microscopy (SEM) for the SCR, SCRT, and 5%Fe@SCRT materials. For Malachite Green adsorption, SRCT demonstrated a maximum adsorption capacity of 39.78 ± 0.5 mg/g using the Langmuir isotherm model and followed pseudo-second-order kinetics. Optimum conditions for adsorption were found to be: an initial concentration of 50 ppm, an adsorbent dosage of 1 g/l, a pH of 8.5, and a temperature of 50°C. For the catalytic oxidation of phenol, 5%Fe@SRCT achieved a remarkable removal rate of 99.9 ± 0.1% under optimum conditions (50 ppm phenol, 1 g/l catalyst dosage, pH 3.5, H2O2 concentration 8.7 mM, and temperature 70°C). Intermediates identified during the reaction included hydroquinone, benzoquinone, catechol, and resorcinol, with degradation occurring over a 60-minute reaction period. The 5%Fe@SCRT material showed excellent reusability in the removal of phenol by catalytic oxidation, with no significant loss of efficiency over three cycles, while the SRCT underwent three cycles of regeneration for the adsorption of Malachite Green. Scavenger tests confirmed the involvement of hydroxyl radicals in the catalytic oxidation process. In addition, fish survival tests after catalytic oxidation of phenol by 5%Fe@SRCT showed no impact on fish, underlining the environmental safety of this process. In addition, germination tests after decolorization of MG by SRCT demonstrated a good effect with no negative impact, reinforcing the ecological value of this innovative technology. These results highlight the innovative use of SCRT and 5%Fe@SCRT as versatile materials for environmental remediation, exploiting their effective adsorption capacities and efficient catalytic oxidation performance within the proposed double-walled borosilicate glass reactor system. PRACTITIONER POINTS: The study demonstrates the effectiveness of an innovative reactor system employing SRCT adsorbent and Fe@SRCT catalyst for efficient removal of malachite green and phenol from wastewater. Environmental impact assessment, including seed germination and fish survival evaluation, validates the method's eco-friendly potential. Implementation of this approach could significantly contribute to sustainable water treatment practices.

Modification of polymethylmethacrylate bone cement with halloysite clay nanotubes.

BACKGROUND: Polymethylmethacrylate (PMMA) bone cement is used in orthopedics and dentistry to get primary fixation to bone but doesn't provide a mechanically and biologically stable bone interface. Therefore, there was a great demand to improve the properties of the PMMA bone cement to reduce its clinical usage limitations and enhance its success rate. Recent studies demonstrated that the addition of halloysite nanotubes (HNTs) to a polymeric-based material can improve its mechanical and thermal characteristics. OBJECTIVES: The purpose of the study is to assess the compressive strength, flexural strength, maximum temperature, and setting time of traditional PMMA bone cements that have been manually blended with 7 wt% HNT fillers. METHODS: PMMA powder and monomer liquid were combined to create the control group, the reinforced group was made by mixing the PMMA powder with 7 wt% HNT fillers before liquid mixing. Chemical characterization of the HNT fillers was employed by X-ray fluorescence (XRF). The morphological examination of the cements was done using a scanning electron microscope (SEM). Analytical measurements were made for the compressive strength, flexural strength, maximum temperature, and setting time. Utilizing independent sample t-tests, the data was statistically assessed to compare mean values (p < 0.05). RESULTS: The findings demonstrated that the novel reinforced PMMA-based bone cement with 7 wt% HNT fillers showed higher mean compressive strength values (93 MPa) and higher flexural strength (72 MPa). and lower maximum temperature values (34.8 °C) than the conventional PMMA bone cement control group, which was (76 MPa), (51 MPa), and (40 °C), respectively (P < 0.05). While there was no significant difference in the setting time between the control and the modified groups. CONCLUSION: The novel PMMA-based bone cement with the addition of 7 wt% HNTs can effectively be used in orthopedic and dental applications, as they have the potential to enhance the compressive and flexural strength and reduce the maximum temperatures.

Study on the dry shrinkage characteristics and size effect of swell-shrink characteristic soil.

Swell-shrink characteristic soils exhibit a high susceptibility to cracking during the drying process, which poses a significant risk of various geological disasters. Among these, the occurrence of drying shrinkage acts as a prerequisite for the cracking phenomenon. Therefore, it is of utmost importance to comprehend the specific characteristics associated with the drying shrinkage mechanism. To investigate the drying shrinkage behavior of swell-shrink characteristic soils, a series of drying shrinkage experiments were conducted on long strip samples of red clay and expansive soil. Utilizing three-dimensional digital image correlation (DIC) technology, the surface displacement, strain, and anisotropic shrinkage rates of the soil samples during the drying process were obtained, and the size effect on the drying shrinkage of swell-shrink characteristic soil were analyzed. The research findings are as follows: The displacement development of the soil samples in the X and Y directions can be divided into two stages: a linear growth stage and a stable displacement stage. In the Z direction, the soil surface deformation can be divided into three stages: soil surface arching, vertical shrinkage, and shrinkage stabilization. The drying shrinkage of swell-shrink characteristic soil exhibits anisotropy, with the vertical shrinkage rate being the largest, followed by the longitudinal and then the transverse directions. Additionally, the soil sample shrinkage exhibits a size effect, whereby the shrinkage rates in all directions increase with increasing sample width and thickness. During the drying shrinkage process, the stress state on the soil surface evolves from initial tensile strain to subsequent compressive strain. The strain at different positions and times within the soil sample is not uniform, resulting in the non-uniformity and anisotropy of the sample shrinkage. This study provides important insights into the cracking mechanism of swell-shrink characteristic soils and serves as a valuable reference for related laboratory experiments, which will contribute to better prediction and control the geological hazards caused by the drying shrinkage of swell-shrink characteristic soils.

Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill.

Leachate emanating from landfills contains ammonia which may cause serious health effects on living things. An effectively designed clay barrier should not allow the contaminant to infiltrate the soil and groundwater systems. The utilization of certain industrial by-products in engineered landfill barriers, not only reduces the need for conventional liner materials but also helps in sustainable waste management. This study investigated the hydraulic conductivity, unconfined compressive strength, compaction, and adsorption characteristics of lithomargic clay blended with an optimum percentage of bentonite (10%) and granulated blast furnace slag (15%) permeated with ammonia. The results revealed that increasing the content of granulated blast furnace slag decreased the maximum dry density while increasing the optimum moisture content. In comparison to lithomargic clay, the hydraulic conductivity of the amended soil liner permeated with ammonia decreased from a value of 3 × 10-8 m/s to 5 × 10-10 m/s. The unconfined compressive strength of the amended soil specimens showed an increasing trend with curing times (i.e., 0, 14, 28, and 56 days). The batch adsorption results revealed that Freundlich and Langmuir's isotherm fits the equilibrium adsorption data and the adsorption of ammonia on clay liner follows non-linear behaviour. Overall, the experimental results implied that lithomargic clay blended with 10% bentonite and 15% granulated blast furnace slag can be used as an impermeable soil reactive barrier in engineered landfills.

Research on the expansion, shrinkage properties and fracture evolution of red clay stabilised with phosphogypsum under dry-wet cycles.

In view of the special engineering properties of red clay and the waste of phosphogypsum resources, the expansion and contraction deformation and fissure evolution of phosphogypsum stabilized red clay under different conditions were investigated by laboratory tests and image processing system. The research results show that: (1) the absolute expansion and absolute shrinkage of phosphogypsum stabilized red clay are positively correlated with the compaction degree, the number of dry and wet cycles and the cement dosage, and negatively correlated with the initial water content and the phosphogypsum dosage; (2) the fissure rate increases with the increase of the number of dry and wet cycles, and decreases with the increase of the initial water content, the compaction degree, the cement, and the phosphogypsum dosage; (3) The relationship among absolute expansion rate (absolute shrinkage), degree of compaction and fracture rate can be fitted by the equation f(x,y) = ax+by+cx2+dy2+e; (4) Phosphogypsum has an obvious inhibiting effect on the expansion, shrinkage and cracking of the mix. It is recommended that the cement mixing amount of 6% and phosphogypsum: red clay = 1:1~1:2 as roadbed filler.

Development of alginate film filled with halloysite-carbon dots for active food packaging.

The development of functional bionanocomposites for active food packaging is of current interest to replace non-biodegradable plastic coatings. In the present work, we report the synthesis of an alginate-based nanocomposite filled with modified halloysite nanotubes (HNTs) to develop coatings with improved barrier properties for food packaging. Firstly, HNTs were chemically modified by the introduction of carbon dots units (CDs) onto their external surface (HNTs-CDs) obtaining a nanomaterial where CDs are uniformly present onto the tubes as verified by morphological investigations, with good UV absorption and antioxidant properties. Afterwards, these were dispersed in the alginate matrix to obtain the alginate/HNTs-CDs nanocomposite (Alg/HNTs-CDs) whose morphology was imaged by AFM measurements. The UV and water barrier properties (in terms of moisture content and water vapor permeability) were investigated, and the antioxidant properties were evaluated as well. To confer some antimicrobial properties to the final nanocomposite, the synthetized filler was loaded with a natural extract (E) from M. cisplatensis. Finally, the extract kinetic release both from the filler and from the nanocomposite was studied in a medium mimicking a food simulant and preliminary studies on the effect of Alg/HNTs-CDs/E on coated and uncoated fruits, specifically apples and bananas were also carried out.